Hey guys!
As Google recently announced Lollipop update for Android one in upcoming weeks, Everyone want to go back to stock ROM to get the official update. SO here I present you the stock ROM flashable zip
I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE!!!
Why this?
Yes, there are other ways of reverting too, but why this method?
Easy to use
No risk of IMEI erase
No additional software/drivers required
Stock recovery not required
Hastle free
How to?
Its easy. Just flash as any other custom ROM
Download the zip and place it in your sdcard
Reboot to recovery
Wipe data, cache, factory data reset
Install zip from sdcard
Navigate to zip and install
Reboot
Screenshots
Downloads and F.A.Qs in second post
Download
http://www.mediafire.com/download/k470f8wohaf0pg0/sprout_stock_KPW53.zip
F.A.Q
Will I get lollipop update?
You might get lollipop update, but mostly, you won't be able to update
Will this work on my phone?
It works on the first three Android One phones i.e. Micromax Canvas A1, Karbonn sparkle V, Spice Dream UNO Mi-498.
This is tested in Micromax Canvas A1 only, though
Is it rooted?
No. It is the full stock firmware
Do I need to install gapps?
No. The stock firmware already has Google apps
Which recovery should I use?
It is tested in Philz recovery. But TWRP and CWM should work too
Any tweaks applied?
No. Its just stock
deodexed or odexed?
I just said it is 'stock' ROM, like 3 three times now. You still ask?
can this rom be flashed over cm11 or pac rom?
drsiddique5700 said:
can this rom be flashed over cm11 or pac rom?
Click to expand...
Click to collapse
Yes just check the installation method
For ota I need stock recovery and locked BL, right?
Joyarup said:
For ota I need stock recovery and locked BL, right?
Click to expand...
Click to collapse
Right. But I'll try to make it compatible with custom recoveries too
Reply please
I tried the method..but dat doesn't work..I am on cm 12.1..philz recovery... I turned off my phone went into recovery did all the procedure cache factory reset and all..den SD card to install zip I found my location..but when I clicked on it..it says error..why..did I miss something
Kickstan said:
I tried the method..but dat doesn't work..I am on cm 12.1..philz recovery... I turned off my phone went into recovery did all the procedure cache factory reset and all..den SD card to install zip I found my location..but when I clicked on it..it says error..why..did I miss something
Click to expand...
Click to collapse
It would be great if you can give me more details on the error. And if you are on lollipop, make sure you formated system partition before flashing
Urgent reply please
Sir..i not on lollipop..I am using cm 12.1..so I wanted to go back to stock from..so as it was written..I downloaded the zip and pasted in SD card..den u turned it off...went to philz recovery..den I searched for the file...I clicked on install new rom...den I searched the file in external SD card..den as soon as I clicked on in..something happened down the procedure and error dats all...I want to know dat I am currently using cm 12.1...by using our zip file will I go back to stock or not..as it say error...I'll send u a screen shot soon...but do reply on dis urgent thank you sir...
Many bugs in this rom....i flashed this rom successfuly by twrp recovery... and when i open playstore its couldnot be opened...its showing unfortunately stopped.. again and again after reboot...pls help me how i solve this....pls reply me fast
Will this work on aq4502 ?
Did this actually work for anyone?
ASHU9668 said:
Many bugs in this rom....i flashed this rom successfuly by twrp recovery... and when i open playstore its couldnot be opened...its showing unfortunately stopped.. again and again after reboot...pls help me how i solve this....pls reply me fast
Click to expand...
Click to collapse
Flash this stable KPX44 version of Android 4.4.4 rom on your device, this is the last & latest Kitkat build for our devices.
Link - KPX44 Kitkat
Compatibility -
*.Sprout4 & sprout8.
Credits -
*. 1cefire
plz upload the link of karbonn sparkle v h/w v1.1 s/w kpw53
Related
OFFICIAL LOLLIPOP -BACKUP FROM PHILLIPINES (4 GB) & INDONASIAN (8 GB) ANDROID ONE
PREREQUISTS
UNLOCKED BOTLOADER (optional - not tested )
PHILZ RECOVERY
ANDROID ONE
PATIENCE
PROCEDURE
CREATE FOLDER clockworkmod/backup inside ext sdcard
extract the downloaded zip inside backup folder
boot into recovery and full wipe
go to backup and restore
scroll down and select misc nandroid backup settings and unchecked md5 check sum .. then go back
then select custom restore from external sd card in backup and restore option
uncheck all options
select only system and boot.img
now select start now
and click boot.img
process will start
wait for it to complete
reboot to system
it will take some 5-6 mins ; be patient
Thats It
Downloads
LOLLIPOP 5.1 4GB -(INDIA)
LOLLIPOP 5.1 4GB MODELS (PHILLIPINES)
lolliop 5.1 8gb (INDONESIA)
credits @ezioamyfor both files [/CENTER]
Works Perfectly!
THIS WORKS PERFECT!:good: Installed on Stock ROM. But all the data is saved in internal storage. Must fix that with Custom ROM coming forwards... SCREENSHOTS ATTACHED
For Symphony Roar A50 ...?
Brother , My Recovery system only has TWRP .
Bro Hope you make for us
Faiyaz5yaz said:
OFFICIAL LOLLIPOP -BACKEDUP FROM INDONASIAN ANDROID ONE
PREREQUISTS
UNLOCKED BOTLOADER
PHILZ RECOVERY
ANDROID ONE
PATIENCE
PROCEDURE
CREATE FOLDER clockworkmod/backup inside ext sdcard
extract the downloaded zip inside backup folder
boot into recovery and full wipe
then select custom restore from external sd card in backup and restore option
uncheck all options
select only system and boot.img
now select proceed
and click boot.img
process will start
wait for it to complete
reboot to system
it will take some 5-6 mins ; be patient
Thats It
Downloads
lolliop 5.1 :laugh:[/LIST]
credits
I ll add tomo .. Wanna sleep now -_-[/CENTER]
[/LIST]
Click to expand...
Click to collapse
You are duplicating the thread .
Already posted the thread of android lollipop 5.1 (indonesian) here :- http://forum.xda-developers.com/cro...ollipop-5-0-x-rom-backup-android-one-t3034288
At least try to give credits to the uploader
Really helped me
samarth05 said:
THIS WORKS PERFECT!:good: Installed on Stock ROM. But all the data is saved in internal storage. Must fix that with Custom ROM coming forwards... SCREENSHOTS ATTACHED
Click to expand...
Click to collapse
The problem is....all the data is compiled in the internal storage..nd their is no option of "move to SD card" present their...plz help me..?
PHP:
dkchalotra said:
You are duplicating the thread .
Already posted the thread of android lollipop 5.1 (indonesian) here :- http://forum.xda-developers.com/cro...ollipop-5-0-x-rom-backup-android-one-t3034288
Click to expand...
Click to collapse
when last night i checked ur post , there were no download links .. Your post was just a placeholder ,which is not allowed on xda .. And also i dont think ur instructions are very much clear for a noob person to flash ..
ezioamy said:
At least try to give credits to the uploader
Click to expand...
Click to collapse
I have mentioned in op tat i will add credits later , since I didn't know ur Fb name .. thanks for reminding and thanks a ton for the upload ..
Can somebody confirm is this is really 5.1 that got some improvements to the whole android and not only separate edition for android one that will need go to other devices like 5.0.2 that never goes to nexus 5?
please add.."delete the .zip file after extracting"
Faiyaz5yaz said:
OFFICIAL LOLLIPOP -BACKEDUP FROM INDONASIAN ANDROID ONE
PREREQUISTS
UNLOCKED BOTLOADER
PHILZ RECOVERY
ANDROID ONE
PATIENCE
PROCEDURE
CREATE FOLDER clockworkmod/backup inside ext sdcard
extract the downloaded zip inside backup folder
boot into recovery and full wipe
then select custom restore from external sd card in backup and restore option
uncheck all options
select only system and boot.img
now select proceed
and click boot.img
process will start
wait for it to complete
reboot to system
it will take some 5-6 mins ; be patient
Thats It
Downloads
lolliop 5.1 :laugh:
credits @ezioamyfor 419mb file[/CENTER]
Click to expand...
Click to collapse
or else it gives error
If an OTA update of Lollipop is available after installing this, will I be able to install it?
Atyen said:
If an OTA update of Lollipop is available after installing this, will I be able to install it?
Click to expand...
Click to collapse
nopes
Androidoo said:
nopes
Click to expand...
Click to collapse
So, can we go back to the stock recovery and android??
Atyen said:
So, can we go back to the stock recovery and android??
Click to expand...
Click to collapse
yes by flashing the stock 4.4 again.
i still love kitkat, lollipop is just themed kitkat
Androidoo said:
yes by flashing the stock 4.4 again.
i still love kitkat, lollipop is just themed kitkat
Click to expand...
Click to collapse
Before selecting custom restore in philz recovery, if i select backup to external SD. And after some time i restore that backup, will i get the stock recovery and KitKat back?
Atyen said:
Before selecting custom restore in philz recovery, if i select backup to external SD. And after some time i restore that backup, will i get the stock recovery and KitKat back?
Click to expand...
Click to collapse
yes you can always take a backup of your original rom, but remember the location so that you can restore it back
Androidoo said:
yes you can always take a backup of your original rom, but remember the location so that you can restore it back
Click to expand...
Click to collapse
Ok. Thank You. Then i will be able to download the OTA update when its available?
Atyen said:
Ok. Thank You. Then i will be able to download the OTA update when its available?
Click to expand...
Click to collapse
yess on stock 4.4
Atyen said:
Ok. Thank You. Then i will be able to download the OTA update when its available?
Click to expand...
Click to collapse
Your bootloader should be locked and phone should have stock recovery if you want ota update
Androidoo said:
yes by flashing the stock 4.4 again.
i still love kitkat, lollipop is just themed kitkat
Click to expand...
Click to collapse
lollipop is just themed version of KitKat ? common man .. where u had this material design before 5.0?
If I agree with ur statement , then it should b like every version of android is themed version of Android alpha 1.0 ..
any heating problem
Any one faced heating problem on their android one
M having some heating problem on my karbonn sparkle v
Bdw. Thanx for this backup ota.
How To Root Lollipop 5.1Many are unable to root the lollipop 5.1 indian rom [Build LMY47I] so here is the solution.
Code:
If you point the finger at me for messing up your device i will laugh at you.
Requirements
1.Stock Indian 5.1 (Link) ,will also works with other androidone lollipop stock roms.
2.Unlocked Bootloader.
3.Philz Touch Recovery .
4.Super Su.zip .
Steps
1.Download the zip.
2.Place it in the sdcard0.
3.Go to Philz Recovery .
4.Flash it using Philz Recovery .
4.1 Wipe cache.
4.2 Wipe dalvik/art cache.
4.3 Flash It.
5.Reboot the phone(take up to 2 minutes so no worries).
6.Install BusyBox and the drivers if necessary.
7.Your phone is completely rooted now.
Downloads
UPDATE-SuperSU-v2.46(Download ).
BusyBox(Download).
Press thanks if i helped:good:
Should i Install BusyBox
vyshnav raj said:
How To Root Lollipop 5.1Many are unable to root the lollipop 5.1 indian rom [Build LMY47I] so here is the solution.
Code:
If you point the finger at me for messing up your device i will laugh at you.
Requirements
1.Stock Indian 5.1 (Link) ,will also works with other androidone lollipop stock roms.
2.Unlocked Bootloader.
3.Philz Touch Recovery .
4.Super Su.zip .
Steps
1.Download the zip.
2.Place it in the sdcard0.
3.Go to Philz Recovery .
4.Flash it using Philz Recovery .
4.1 Wipe cache.
4.2 Wipe dalvik/art cache.
4.3 Flash It.
5.Reboot the phone(take up to 2 minutes so no worries).
6.Install BusyBox and the drivers if necessary.
7.Your phone is completely rooted now.
Downloads
UPDATE-SuperSU-v2.46(Download ).
BusyBox(Download).
Press thanks if i helped:good:
Click to expand...
Click to collapse
I have rooted my spice dream uno without wipe data and cache. its work fine. Should i Install busybox along with Supersu.
Narasimman91 said:
I have rooted my spice dream uno without wipe data and cache. its work fine. Should i Install busybox along with Supersu.
Click to expand...
Click to collapse
BusyBox is required by some apps not all. If some root apps malfunction then you may install it n retry those apps.
Could anyone give step by step guide to flash via sp flash tool without losing imei no?
Whenever i flash i loose my imei no...
Any tutorial link or YouTube video link.?i am on Android 5.1 indian rom backup...
My questions are:
1. Multiuser function fixed?
2. Hike app working?
3. Contacts, dialer working?
4. Output sounds ok? (Loud?)
5. Any thing else ok?
Sent from my A1 using XDA Free mobile app
Avijitmodi said:
Could anyone give step by step guide to flash via sp flash tool without losing imei no?
Whenever i flash i loose my imei no...
Any tutorial link or YouTube video link.?i am on Android 5.1 indian rom backup...
Click to expand...
Click to collapse
Flash your phone normally... Before flashing jas uncheck preloader files in sp tool and flash your phone in download mode!! Your imei number wont loose!
Running out of storage
I have successfully updated to Lollipop with the steps provided on Spice dream uno, but the device always keeps on showing "Storage running out of space", nothing has been installed, and if I try to install it again shows error insufficient space to download apps. What should I do ?
Should I flash it or restore it..? Should I select clean to install new rom in philiz?
Sent from my A1 using XDA Free mobile app
okay, very good! BuT HOW TO INSTALL RECOVERY IN 5.1? IT ISNT GETTING INSTALLED...
help...
i was able to install recoverys and all when using 4.4 and i even flashed 5.1 through recovery only...
but after updating , my custom recovery is not there and i am not able to install even...
HELP!
now after cm and cr droid kernel i want to post my dailydriver rom
created with prf creator
witm xz dual recovery
and a few tweaks
based on 23.4.a.0.546 stockrom
xposed installed only download of xposed alpha 4 apk is necessary
thanks to nut for xzdr and the crator of prf and romracer for xposed for 5.1.1
next relse deodexed if i can handle it .
( lpd and archi kitchen in vm give me some problems on my surface pro 2 sorry no eta for this for now)
have fun guys
instrucktion :
1.download rom and kernel from mega
2.flash rom (wipe before)
3.flash kernel
4.boot rom
5.install xposed
6. only for people without recovery on device root it unlock bootloader und flash the twrp image from my cm thread with flashtool(fastboot mode) then start point 2.
link: https://mega.nz/#F!rIgRgAQY!PD9Yf-kfmB4KrdBtgQN2Bg
a little update i upload some stuff ( usefull for me ) to mega like sense 7 home ( works for me signed and edited with apk tool)
working on themes with sony design studio beta (upload it when its done ) + till now a test starts with syncing github and testing aosp Builds (PAC Rom and carbon Rom but none oft them are in more then pre alpha state booting up but anything is crashing etc NO ETA)
screenshots are up Files on mega also
ITS DEAD JUST WAIT A BIT FOR MY NEW ROM
Can you please post a mirror that's not mega?
no mirror
no
i know mega guys are bad chinese peoples but no ive got dropbox also but i think it generates to much traffic if some more guys then you are using the link
sorry.
I'm currently on Cyanogenmod 12.1, can I use the CM recovery to flash both of these, or do I need TWRP first?
on cm12 boot to bootloader
open flashtool
flash the twrp
boot in twrp
flash the rom
flash the kernel
Can this rom be flashed on a locked bootloader?
I was able to obtain root and install recovery through exploit by flashing Z3 system image, everything works fine until TWRP installs ROM / Kernel, then it dies.
Restarting the process of going back to Kitkat is available through flashtool, so no hard brick. But tried this twice so far and no luck.
Just look in op
Point 6 unlock bootloader etc
I dont test it in LB because the first thing ive doing in a newer xperia is UB
So i think it wohnt work in LB
Sorry
The only way if you want is save Ta etc UB then try it
unfortunately my bootoader can't be unlocked, I've since moved onto a rooted stock and it works as expected.
warzone2011 said:
Just look in op
Point 6 unlock bootloader etc
I dont test it in LB because the first thing ive doing in a newer xperia is UB
So i think it wohnt work in LB
Sorry
The only way if you want is save Ta etc UB then try it
Click to expand...
Click to collapse
So, I tried installing this this morning and I am stuck in a bootloop. I've uploaded a video for you to show what is happening. I can't get into recovery or anything.
https://youtu.be/SXTSu1KtGW4
Any suggestions?
Thanks
I used RecRoot V4 to get root, bundled it into a prerooted zip with PRFCreator, unlocked my bootloader, flashed the advanced kernel+twrp from way back, flashed the zip I built and voila, Marshmallow rooted. I don't have access to Recovery, even though RecRoot V4 claims to come with it.. but I'm not losing much in my circumstance.
http://forum.xda-developers.com/z3/general/wip-sony-android-6-0-mm-t3337357/
Dodolom said:
So, I tried installing this this morning and I am stuck in a bootloop. I've uploaded a video for you to show what is happening. I can't get into recovery or anything.
https://youtu.be/SXTSu1KtGW4
Any suggestions?
Thanks
Click to expand...
Click to collapse
sorry for your problems and my late response to it
have you follow all the necessary steps from the op?
just flash a stock ftf install nuts dual rec wipe for a new rom and try it again
hope it helps
warzone2011 said:
sorry for your problems and my late response to it
have you follow all the necessary steps from the op?
just flash a stock ftf install nuts dual rec wipe for a new rom and try it again
hope it helps
Click to expand...
Click to collapse
Oh man, that was from a long time ago. How odd is it that I have the tablet in front of me right now and am trying to root it. I upgraded to 6.0.1 yesterday and now trying to find a way to root it. Maybe, you can help with that
Thanks
Dodolom said:
Oh man, that was from a long time ago. How odd is it that I have the tablet in front of me right now and am trying to root it. I upgraded to 6.0.1 yesterday and now trying to find a way to root it. Maybe, you can help with that
Thanks
Click to expand...
Click to collapse
i did it after flash twrp 3.0.2. 0 with flashtool and in twrp i flashed rec root (i think the latest super su zip from chainfire does the job also)
and flashed again twrp 3.0.2.0 with flashtool because of a boot issue
i flash back to 4.4 because of battery and Performance issues
I've installed novafusion maclaws cm12 5.1.1 through ODIN folowing steps on his site, and I wanted to do factory reset from menu in phone but my phone got stuck in to blue-black stripes with "teamwin", it is just blinking screen every 2-3 seconds...I've tried few more times to install again CM12 but without success, every time it is the same I can get out of "teamwin2 screen, any solution for this problem? Need phone, only that I got now
Reflash the stock rom via odin
Sent from my GT-S7390 using XDA Forums
didn't help I've downloaded stock rom but when I import it in ODIN via PDA I get notification that md5 file is invalid or something like that.....one more thing md5 file that I downloaded is ending with .tar I added after that .md5 is this ok? It shows me that .tar is winrar archive which when I unzip get some files but not one with .md5 at the end
Somehow after zillion tries I installed CM12 and now the problem is how to install gapps ? When I get in recovery mode I got it like this (first photo on that site):
http://www.digitaltrends.com/mobile/use-recovery-mode-android/
I downloaded gaapps and copied it to internal storage of phone, what should I do next, how to access and install gapps?
gorantz said:
Somehow after zillion tries I installed CM12 and now the problem is how to install gapps ? When I get in recovery mode I got it like this (first photo on that site):
http://www.digitaltrends.com/mobile/use-recovery-mode-android/
I downloaded gaapps and copied it to internal storage of phone, what should I do next, how to access and install gapps?
Click to expand...
Click to collapse
That's a stock recovery, u need to flash the custom recovery and then flash the gapps from SD card or internal.
P.S.: u need to flash the gapps and rom at the same time. If u do it separately then u will be in big problem(worst nightmares).
tra_dax
---------- Post added at 08:31 AM ---------- Previous post was at 07:54 AM ----------
U can get the twrp.tar file from here:
https://dl.twrp.me/golden/twrp-2.8.3.0-golden.tar.html?_e_pi_=7,PAGE_ID10,8537289601
But I m not sure whether this is the latest version or not so do some research and then proceed.
tra_dax
I'll try this tonight, and I'll do it at same time, tnx
Thank you it worked!!! But I installed CM11 from novafusion stable version instead of CM12.1.....I've red that battery life on CM11 is better and it is wt less bugs...any other CM I shoud try?
gorantz said:
Thank you it worked!!! But I installed CM11 from novafusion stable version instead of CM12.1.....I've red that battery life on CM11 is better and it is wt less bugs...any other CM I shoud try?
Click to expand...
Click to collapse
U can try any cm ROM that has made for ur device. U just need to download the respective recovery for that. For the battery life u can download a custom kernel respective to the ROM. Or try any other ROM.
tra_dax
any recommendation ? what are you using tra_dax?
gorantz said:
any recommendation ? what are you using tra_dax?
Click to expand...
Click to collapse
I m using pac-man ROM.
Here u can find the list of kernels with their specifications:
http://forum.xda-developers.com/gal...ernel-collection-kernels-roms-s3mini-t2810435.
It would be better if try out the overclocked kernels.
Remember flash the kernel which belongs to the respective android version. Don't flash lollipop kernel to kitkat ROM or vice-versa. If u need help, @Android-Andi can help u in this case as he too has the same device. U can get the pacman ROM for ur device easily (made by novafusion).???
tra_dax
Good morning guys,
This is my first time trying to install any CM rom on my 2014 Moto G with original 6.0 Marshmallow system, had a little trouble unlocking the bootloader, but solved that in a little while and after that i sucessfully installed TWRP touch but could not flash any zip file from it (including a super user zip, after executing a "run.bat" file required first). After some hours of trying hard, i used the factory reset from the bootloader and after the process was done my wifi and another features stopped working, so i installed a stock kit-kat rom and got everything back to work, problem solved. Unfortunately my TWRP still can't flash the superuser file, and I really wanted to run some custom Nougat rom on my device. Bootloader still unlocked code 3, device fully working on kitkat, but need some tips on how to get over the TWRP trouble I've been dealing with.
Thank you for reading, sorry for bad english.
which TWRP version do you use?
Spieletips said:
which TWRP version do you use?
Click to expand...
Click to collapse
3.1,but 2.8 got me the same problem
Spieletips said:
which TWRP version do you use?
Click to expand...
Click to collapse
just got to sucessfully flash the zip for super user, but still cant get to flash either one of 2 rom zip files i had in my sd card
paulo.rdgs.pcr said:
just got to sucessfully flash the zip for super user, but still cant get to flash either one of 2 rom zip files i had in my sd card
Click to expand...
Click to collapse
What error TWRP give? I think its because your new(android 6) bootloader isn't compatible with many roms. I don't know how to fix it :/ but you need to care, many users have hard bricked their devices like that.
paulo.rdgs.pcr said:
just got to sucessfully flash the zip for super user, but still cant get to flash either one of 2 rom zip files i had in my sd card
Click to expand...
Click to collapse
i can help tell me roms you able to flash
and other 2 that not able to flash with thread links
it just says the zip is corrupted, well i got a kit kat stock rom installed via bootloader, but just cant load any rom from twrp
rony raj said:
i can help tell me roms you able to flash
and other 2 that not able to flash with thread links
Click to expand...
Click to collapse
actually i couldnt load any rom via TWRP (I've tried 3 or 4 CM14 different roms, didnt remember exactly which ones, but I'll try some more by friday or thursday), the kitkat stock rom i have now was installed via bootloader/cmd
paulo.rdgs.pcr said:
actually i couldnt load any rom via TWRP (I've tried 3 or 4 CM14 different roms, didnt remember exactly which ones, but I'll try some more by friday or thursday), the kitkat stock rom i have now was installed via bootloader/cmd
Click to expand...
Click to collapse
update your recovery from here
https://dl.twrp.me/titan/
download latest twrp and rom
latest rom is here
https://forum.xda-developers.com/moto-g-2014/development/rom-aospextended-rom-v3-3-t3572471
hit thumbs up if i helped you
rony raj said:
update your recovery from here
https://dl.twrp.me/titan/
download latest twrp and rom
latest rom is here
https://forum.xda-developers.com/moto-g-2014/development/rom-aospextended-rom-v3-3-t3572471
hit thumbs up if i helped you
Click to expand...
Click to collapse
This solved my issues, thank you soo much fellow