[N7000 XEF] - Battery bug - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Help me !
My Galaxy Note N7000 XEF (France) have big battery bugs.
I tried to flash CWM in order to install CM11, but it said : This is for GT-N7000 devices only, and your device is «».
So I've downloaded Stock ROM (after 9^999999 hours of search on the net), I've flashed it and this is the same !
(I've, of course, done data wipes before the processes)
Is there someone to help me ?
PS : If you dont want to search on the net and to wait 3 hours to download it, download it directly from my Dropbox : I CANT POST THE LINK YET (because of new member 10 posts requirement) (put a 1 at the end for a direct download)

I've found the reason !
My battery was dead. And stock firmware is bad so i've flashed cm11 on it.
Envoyé depuis mon GT-I8160P sous CM12

Related

[ROM][P3100] XXCLL2 Stock Deodexed & Rooted by chudy_85

Hi all its me again
Today i give you this rom XXCLL2 Stock Deodexed & Rooted by chudy_85
Link here ---> http://hotfile.com/dl/186603225/17a9685/XXCLL2_Stock_Deodexed__Rooted_by_chudy_85.zip.html
I dont remove any applications
About rom:
Latest Superuser0.99 + su
Busybox 1.20.2
support init.d
deodexedd
zipalign
sing
nano
sysro and sysrw
non wipe
no tweaks in build.prop
no name this rom
how to install:
Install XXCLL2 stock using odin
install CWM 5 or 6
copy XXCLL2 Stock Deodexed & Rooted to the sdcard0 chudy_85 or extsdcard
flash using cwm5 or 6
Table reboot
if you have some problem or fc Do wipe system / data and cache
have fun
P.s
in the ROM samsung gave additional protection
when we use TriangleAway we can reset the custom binary but after switching off and on again, we have our tablet stamped counter to 1
TriangleAway if you are using it remember that before flashing another rom first reset the custom binary later enter download mode and only use the Odin to flash another rom before putting on guarantees
Thanks for mirrow
*hemantshah3
Thank you so much.....great work chudy_85:thumbup::thumbup:
Sent from my GT-N7100 using xda premium
info for all
I find 1 bug and it's samsung miusic player --- we dont have x to close and when we open we can't close
ad secend it's battery drain
when i power off and power on my battery is go down 3-4%
but i find this bug in stock odex rom installed odin
info for all
I find 1 bug and it's samsung miusic player --- we dont have x to close and when we open we can't close
ad secend it's battery drain
when i power off and power on my battery is go down 3-4%
but i find this bug in stock odex rom installed odin
Click to expand...
Click to collapse
The 1st bug is becoz of samsung. ....
Even this close option is also not there in note2 version also.....
I think samsung people forgot close button for all 4.1.2 series .....lol....
The second one battery. ...try battery calibration. ..I think this will fix it......
Strongly thinking for attractions. ...
Sent from my GT-N7100 using xda premium
please add a resume able download link
Mirror Link For the Download
adishakthi said:
please add a resume able download link
Click to expand...
Click to collapse
https://docs.google.com/open?id=0B194R9agkMgoXzZGeDdQYUwtRDQ

[GT-I9192]-[ROM][Stopped][Odin]Galaxy S4 Mini Duos 4.2.2 JB TouchWiz 18/07/2014

/!\ This Rom works only for GalaxyS4 Mini Duos I9192 /!\
/!\ If u have Knox bootloader active ( Word "Knox" in Download mode ) DO NOT flash this, it will Void Knox Warranty 0x1 /!\
/!\ Flash it at your own Risk /!\
/* Your warranty is now void.. LOL I guess you knew it already.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting dumped or you getting fired because your phone*
* bootloops and alarm does not go off. Please do some research if you have any *
* concerns about features included in my kernel before using it! YOU and only*
* YOU are choosing to make these modifications.
*/
- I9192XXUBML4 PDA and Modem ( From Russian firmware La Fleur edition ) Also available to Ukraine/Kazakhstan/Uzbekistan .
- Krait retention power saving state added
- I9195OXXBML1 Multi CSC. U can change your CSC code with Galaxy CSC Changer ( Will wipe your data ) from :
Code:
BGL - Bulgaria
ERO - Bosnia and Herzegovina
EUR - Greece
NEE - Finland ( Nordic countries )
PRO - Belgium / Luxemburg
SEE - South East Europe
SMO - Serbia
TPH - Portugal
TSR - Serbia
XEF - France
XEO - Poland
CMF - Macedonia
CYO - Cyprus
ETL - Czech Republic
MSR - Serbia ( Telenor )
ORX - Slovakia
PHE - Spain
ROM - Romania
SEB - Baltic
SIO - Slovenia
TOP - Serbia / Montenegro
TRA - Croatia
TWO - Croatia ( Two/Tele2 )
XEH - Hungary
XSK - Slovakia
- Prerooted with SuperSU 1.91 credits to @Chainfire ( u can unroot from SuperSU app ) only su and Superuser.apk added no daemons or anything else
- Removed Knox apps & bootloader, rest stock
- My custom Kernel included
Download: v1
I9192XXUBML4_I9195OXXBML1_I9192XXUBML4_SILVIU.tar.rar 872.1 MB
https://mega.co.nz/#!1clUjKiT!PMIPVyiborrR5kU-q4nm1x5ji2V38zd5oFFLnZwD1yw
Download: v2
I9192XXUBNB1_I9195OXXBML1_I9192XXUBNB1_SILVIU.tar.rar 885.2 MB
https://mega.co.nz/#!NIMkBLzb!7CVKx5TltrbApQ2suovLwqBE8zEv2O9Rv6MmS1Nm69g
Mirror for v2 http://www.mediafire.com/download/l...BNB1_I9195OXXBML1_I9192XXUBNB1_SILVIU.tar.rar
Download: v2.1
I9192XXUBNC1_I9195OXXBML1_I9192XXUBNC1_SILVIU.tar.rar 885.3 MB
https://mega.co.nz/#!5MNTwB5Z!biris4zIPsU2-INJ02nmM8lHdxvHd8yC5Ij-MqgokUk
Download: v2.2
I9192XXUBND2_I9195OXXBML1_I9192XXUBND2_SILVIU.tar.rar 822.8 MB
https://mega.co.nz/#!lBt0kYyB!7z-7fmcaUXmW_ZZ4BtqqyF8C8_-ai83g6kTANVwKp94
Download v2.3 Final
I9192XXUBND2_I9195OXXBML1_I9192XXUBND2_SILVIUv2.tar.rar 884.2 MB
https://mega.co.nz/#!NYcR0CjQ!eKLZSLjF5jTlmIcW-3PcCvQd8hHhNPVrDHj9hUOowhE
P.S. For now i will stop my development, if i find the motivation to try to work on KitKat i will resume
P.S. Nothing fancy ! Only an working rom
No "bloatware" removed u can do that on your own , no mods
Installation instructions:
Download rom file to your PC
Unpack it and flash as any stock rom with Odin 3.09/ Odin 3.07
If your Baseband does not get updated reflash again !
Wipe data/Factory reset is not needed but recommended
Changelog:
Code:
[B][COLOR="Blue"]v1[/COLOR][/B] - Initial Release based on I9192XXUBML4
[B][COLOR="blue"]v2[/COLOR][/B] - Update base to I9192XXUBNB1 ( Black edition )
Updated SuperSU v1.93
Transparent AccuWeatherWidget
Removed bloat from hidden partition
[B][COLOR="blue"]v2.1[/COLOR][/B] Update base to I9192XXUBNC1 - minor update
[B][COLOR="blue"]v2.2[/COLOR][/B] Based on I9192XXUBND2 Changelist 2634683
- Updated SuperSU v1.94
- Removed small amount of bloat:
Books.apk
ChatON_MARKET.apk
Dropbox.apk
DropboxOOBE.apk
Flipboard.apk
GearManagerStub.apk
GoogleDrive.apk
Hangouts.apk
Magazines.apk
Music2.apk
PlusOne.apk
PlayGames.apk
TripAdvisor.apk
[B][COLOR="blue"]v2.3 Final ( Project stopped for now )[/COLOR][/B] Based on I9192XXUBND2 Changelist 2634683
- Updated SuperSU v2.01
- Stopped removing previous bloat ( it was causing more harm then good, u can delete what u want but i saw more battery usage, more ram used when i deleted bloat then without )
- 2 small build.prop tweaks ro.ril.disable.power.collapse=0 / pm.sleep_mode=1
reserved
SilviuMik said:
reserved
Click to expand...
Click to collapse
cant you put external to internal memory swap feature into gt-i9192 and a transperant accuweather or could you please do it as a mod to this rom ?
hi
hi SilviuMik
1)have any tweaks in your rom? build.prop tweaks,zipalign,...?
2)blotware removed in your rom?
3)my s4(i9192) very laggy,and Front and rear camera, 2 seconds it takes to be moved in stock rom,how is your rom?
sorry my bad engish
Are there any differences comparing to this ROM: http://forum.xda-developers.com/showpost.php?p=49209925&postcount=43 or is it exactly the same ROM?
Regards.
longu said:
Are there any differences comparing to this ROM: http://forum.xda-developers.com/showpost.php?p=49209925&postcount=43 or is it exactly the same ROM?
Regards.
Click to expand...
Click to collapse
Same just that some people asked me to make a thread about it
Well, is freshed compiled with latest SuperSU
No mods, no zipalign no nothing
Works verry good like so
How come I missed this thread? :silly:
How is the battery life of this ROM on 3G?
SandeepEmekar said:
How come I missed this thread? :silly:
How is the battery life of this ROM on 3G?
Click to expand...
Click to collapse
I usually keep my phone on 2g so I can't answer u. Maybe someone else can
AOSP please
Sent from my Galaxy S4 Mini GT-I9192
arabic support
sorry for my noob question do i have to make full wipe or reset the phone
and dose it have Arabic language العربية
many thanks
yosry said:
sorry for my noob question do i have to make full wipe or reset the phone
and dose it have Arabic language العربية
many thanks
Click to expand...
Click to collapse
Yes it does have. Not needed but recomended
SilviuMik said:
Yes it does have. Not needed but recomended
Click to expand...
Click to collapse
many thanks i got it installed can u tell me what is new in this rom from ur previous one
yosry said:
many thanks i got it installed can u tell me what is new in this rom from ur previous one
Click to expand...
Click to collapse
Which previous one ? If u mean the one i posted in my kernel thread then not much ... before it was based on Ukraine rom, and now on Russia La fleur version, updated ramdisk and updated SuperSu and su, removed la fleur apps / cache
Other then that, nothing
I will make a new version when some XXU* ( european ) version will come from samsung
Info required mate
SilviuMik said:
Which previous one ? If u mean the one i posted in my kernel thread then not much ... before it was based on Ukraine rom, and now on Russia La fleur version, updated ramdisk and updated SuperSu and su, removed la fleur apps / cache
Other then that, nothing
I will make a new version when some XXU* ( european ) version will come from samsung
Click to expand...
Click to collapse
SilviuMik, I have I9192 s4 mini duos from India, i made custom rom using kitchen, every thing works fine i am able to install without any issue using cwm recovery, only issue is no base-band and network related things like bluetooth wifi display toggle working.. i have de-odex, zipalined all apks and added few mods.. every thing works perfect. only network not visible.also i tried to flash back the modem.img which i took backup before flashing my custom rom. still it dont show up. I have made my cwm backup so when restored all works back without any issue. so any thought or input to make network work on the custom rom i made. mine is knox boot loader 0x0 even after root and installed kernel which c0bain created one for I9192, and Philz touch recovery all works fine.
I am on I9192DDU1BML1 stock rom with all the boalt wares removed. any one looking for email app for your office exchange emails without pin to un lock the screen i have it. i have used the same methode which i did in my S2.
---------- Post added at 12:45 PM ---------- Previous post was at 12:31 PM ----------
itsme12345 said:
SilviuMik, I have I9192 s4 mini duos from India, i made custom rom using kitchen, every thing works fine i am able to install without any issue using cwm recovery, only issue is no base-band and network related things like bluetooth wifi display toggle working.. i have de-odex, zipalined all apks and added few mods.. every thing works perfect. only network not visible.also i tried to flash back the modem.img which i took backup before flashing my custom rom. still it dont show up. I have made my cwm backup so when restored all works back without any issue. so any thought or input to make network work on the custom rom i made. mine is knox boot loader 0x0 even after root and installed kernel which c0bain created one for I9192, and Philz touch recovery all works fine.
I am on I9192DDU1BML1 stock rom with all the boalt wares removed. any one looking for email app for your office exchange emails without pin to un lock the screen i have it. i have used the same methode which i did in my S2.
Click to expand...
Click to collapse
Also one more thing SilviuMik do you have Android PIT file so that i will try to flash a rom without on Knox boot loader and then install the BML1 without boot loader as per one of the doc to remove it from stock rom .
itsme12345 said:
.
Click to expand...
Click to collapse
Does your baseband get updated when u flash it with Odin ?
Take care usually u need to flash it 2 3 times
It also sometimes depends on what tz.mbn u used in combo with NON-HLOS
Try to extract modem from stock firmware and tar + md5 it and flash it 2 3 times with Odin. Then your wifi should work
Let me know how it goes
i am very happy to see more rooms for the DUOS hope will be a lot more in the future....thx man
SilviuMik said:
Does your baseband get updated when u flash it with Odin ?
Take care usually u need to flash it 2 3 times
It also sometimes depends on what tz.mbn u used in combo with NON-HLOS
Try to extract modem from stock firmware and tar + md5 it and flash it 2 3 times with Odin. Then your wifi should work
Let me know how it goes
Click to expand...
Click to collapse
Thankyou for reply, okay tonight i will try to tar + md5 the existing modem i have and flash via Odin. Also by any chance do you have pit file for I9192, so that i am plannning to remove my knox boot loader along with old firmware and then may be future glitches will be out to install all other cynogen or CM11 roms.
itsme12345 said:
Thankyou for reply, okay tonight i will try to tar + md5 the existing modem i have and flash via Odin. Also by any chance do you have pit file for I9192, so that i am plannning to remove my knox boot loader along with old firmware and then may be future glitches will be out to install all other cynogen or CM11 roms.
Click to expand...
Click to collapse
Well i have posted one time about a pit file that i took from Efs professional when i saved my Efs but can`t seem to find my post.
I am also not sure if that pit file can be used with Odin
When i get home i will reupload it
itsme12345 said:
.
Click to expand...
Click to collapse
Here is the pit i have, as i said earlier it is made using Efs professional NO IDEEA if it will work with Odin
And i think u can`t remove Knox bootloader this way
As i read u need a Z3x Box and some other things to remove Knox bootloader
@SilviuMik
I installed the ML4 rom and noticed the battery drain is related to how I set up the SIM cards.
If I enable both SIM cards, the mobile network signal shown under Setting>Battery is fine (continuously green)
However if I only enable SIM 1 but disable SIM 2, the cell standby consumption is high and the mobile network signal turns red
If I only insert SIM 1 and remove SIM 2 from the phone, the mobile network signal is green again
I found it the same with MK4 rom. Is this a normal behaviour? I have imagined that disabling one SIM card should lower the battery drain but it is not. Let me know if you have any ideas. Thank you.

[Q&A] [ROM][STOCK JB 4.1.2][I8190/N/L]★R-Mod-v3★[21/6/2014][AROMA]

Q&A for [ROM][STOCK JB 4.1.2][I8190/N/L]★R-Mod-v3★[21/6/2014][AROMA]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
323
v4 ? pls
Thanks
Thanks, the best Rom i have tested for S3 Mini.
No issue, not like maclaw's ones
I can't find samsung remote control under security settings. Memo won't sync as well.
awesome
you are ****ing awesome thankss
Buddy if Possible plz let me knw how to give 5.0lollipop to S 3 mini...i knw u got new phone but plz let me knw abt it if possible.....
New here
Hi, i'm new about root and custom ROMS, can somebody tell me all the steps to install this please?
I'm already a root user and TWRP
hye, im newbie from malaysia.
im using carbon rom 4.4.4. i wanted to install R-Mod-v3. did i need to wipe data ? just install rom and gapps ?
Thanks ronin790 for this great job, witch version can i use in I8190NXXANI1 ?
Problem with MOB
After applying this MOD via CWM my phone i8910N is unresponsive it just show repeating Samsung glowing logo.
Can someone help?
Phone has been rooted.
Sense style recent apps on v3?
How to install sense style task manager on v3????
Extras having this only works on v1 ,am i right?
GPS problem
Ronin, the rom is great but I have a problem with the gps.
When I turn the gps on, it takes 10-15 min to fix. After that, it fix fast but if I move with a car to other far places with the gps of and want to turn it on, it takes a long time to fix again.
I live in Brazil, is there anything that I can do to have it fixed faster?
Thank You!!
Question
Hi, can i install the ROM without the AROMA Installer?
I am having trouble in this application. Thanks
Hi guys,
Yesterday i installed this rom in my wifes S3 mini (8190N). There is a problem: when she wants to send mms she must manually turn on mobile data Is there any solution for that? Before this rom she had full stock 4.1.2 and mobile data turned on automaticly with mms send.
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
Anybody...?
Ok, I did it myself.
All you have to do is to edit the file /system/csc/others.xml . At the end of the file just above
Code:
</FeatureSet>
</SamsungMobileFeature>
just insert two lines:
Code:
<CscFeature_Message_EnableMmsMobiledataOff>true</CscFeature_Message_EnableMmsMobiledataOff>
<CscFeature_RIL_ForceConnectMMS>true</CscFeature_RIL_ForceConnectMMS>
Save the file. Permissions of the file: rw-r-r. Reboot and it's done.
Headphone problem
please help me guys.I installed the ROM normally but I can't listen to music on my headphones how can I solve this problem?
Installation Problem
I have installed 4.4.4 Kit Kat ... Try installing this rom because I was hooked . But after all steps stays in the boot logo . I suggest ????
Installation Problem
Install it on my samsung Galaxy S3 Mini GT- I8190L , I could do without difilcultad installation . But when ending bootanimation between direct to the home screen without asking the configutaciones .
And on the main screen places a series of yellow letters. and will not let me install anything because it says I do not have enough memory
Change in TWRP the extension of fs2 to ext4 and just does not work
I installed 4.4.4 Kitkat nova fusion . Not if have something to do .
Help please
I installed the rom everything went well but when I click Reboot system Now the device not the boot and reboot back to the recovery I ask for help because much want this rom on my aparalho excuse any errors of English as I am of Brazil .

n910s installing bobcatrom theme solved + all languages enabled including arabic

can any device live without bobcat rom ?
warning .... backup your efs you will need to restore it (after all prosses your efs will be losted )
install official : N910SKSU1ANJ1_N910SSKC1ANJ1_N910SKSU0ANJ1_HOME.tar
root the phone using :Philz6.58.9-treltexx-ExynosSM-N910KLS-KOR
install rom : N910LKLU1ANL1 mod BY zds1101 v1.0
@ restart interupt (or you will stucked with corean apps store and all google apps fail to work ) and install : pa_gapps-modular-full-4.4.4-20141025-signed
restart to make change
finally install bobcatrom theme and enjoy ...
all languages enabled including arabic
all files available in xda forum just use searching angine.
First of all thank you for your time and effort. I installed custom rom from s version to my
Sm-n910k with success. Now I got h+ I got floating notification flashlight and the LTE is working fine now with three UK . I hope more custom rom are coming to our S K L Korean version. Right now we got only 2 custom ROMs
1 Sphinx 1A -> http://sphinx.vn/post/100759263191/rom-note-4-n910k-rom-sphinx-v1a-samsung-galaxy
2 N910LKLU1ANL1 mod BY zds1101 v1.0 ->
http://pan.baidu.com/s/1gd3Vjhh#path=%2F%E9%9F%A9%E7%89%88note4-N910LKLU1ANL1%20v1.0
Does this method work for other exnyos ROMs for the 910s?
can someone please uploaded to a non chinese website please!
Br
Aggro

[ROM][GUIDE][A3300-H/HV] Cyanogen Mod 12.1 Android 5.1.1 Lenovo Tablet

Hi Everyone,
After checking lots of days and searching all forums I wanted to share with all world about Cyanogenmod 5.1.1 for Lenovo A3300-hv. (a.k.a. A7 )
What is working :
-Wifi
-Bluetooth
-Gps
-Phone (Audio Calls)
And whole other functions.
What is NOT working :
- Camera.
Actually I tried to copy libs from original rom dump and settings from system folder but I couldnt manage. If someone has some ideas or possible fix please tell me. Also tried for 3rd party applications but still no chance to work.
Lets Continue to guide.
Before you continue make sure you have backup and root !
1. Install flashify.
Download Flashify : http://www.mediafire.com/download/w1i87ls2ell7c1f/Flashify.apk
* If you face any issues please use Rashr.apk
2. Download TWRP Recovery and put it to tablet (either phone storage or sdcard)
Download TWRP Recovery : http://www.mediafire.com/download/1v3ejw7jcw4ivcm/recovery.img
2.1. After downloading TWRP please flash it from Flashify.
* Open Flashify app
* Choose Recovery Image from flash tab.
* Choose recovery.img that you downloaded and put on tablet.
3. Download rom and gapps.
CM A3300HV : http://www.mediafire.com/download/hz670h0dd00gtw4/A3300HV_CM_5.1.1.zip
Gapps Minimal : http://www.mediafire.com/download/nb1rt48rqrz8m16/gapps.zip
After downloading both files please put them to sdcard or internal storage.
Now reboot to recovery.
1st option : Power off tablet. Press and hold VOLUME UP + POWER till you see TWRP screen.
2nd option : Open flashify and choose reboot to recovery.
4. Please backup your current rom.
5. Now Wipe Data & Cache make a factory reset. It can take more less 2 minutes just keep calm and imagine cool places from your hometown.
6. Now install rom and gapps as standart old school method.
7. Reboot system VOILA ! Enjoy the Cyanogen Mod 5.1.1 rom in your Lenovo A3300-HV (A7).
Additional :
I am using following theme. Highly recommend it. It is smooth like a silk !
Galaxy Theme : http://www.mediafire.com/download/1o8m6dqblp7tdoc/GalaxyTheme.apk
Screenshots :
Feel free to ask questions.
HOW TO RETURN STOCK : http://forum.xda-developers.com/len...tock-a3300-gv-g-a3300-hv-h-return-to-t3442219
**** reserved *****
Thanks for your work, bro!!!
But can you show us so screenshots? And can model A3000-H use your ROM?
BobbyCurry said:
Thanks for your work, bro!!!
But can you show us so screenshots? And can model A3000-H use your ROM?
Click to expand...
Click to collapse
This ROM targets the newer version of the tablet. Not the A3000. Their hardware is very different.
I attached screenshots.
any1 tried it on A3000-H ?
Will this ROM work for the A3300-GV, too?
Is the chip the same?
GV is the 2G Version, HV is the 3G Version, I think.
I've tried it on my A3300-H. The camera doesn't work as the developer stated. There are some minor bugs too, but still it's a very nice ROM.
Thanks for the great work!
The camera is not working so far and this tablet has a MTK chipset, correct?
This sounds familiar.
The CyanogenMod Rom for the Fire 5th Generation had also the camera problem before but now it is fixed.
And: The Fire has also a MTK chipset. Maybe its code will help us here!?
Look around here:
http://forum.xda-developers.com/amazon-fire/orig-development/rom-cm-12-1-2015-11-15-t3249416
Is there gonna be an update to fix the camera problem?
deleted my imei how can i replace it ? i try mtk tool but not replace it :s
yazilimcionline said:
deleted my imei how can i replace it ? i try mtk tool but not replace it :s
Click to expand...
Click to collapse
Flash azam426 rom by latest SPFlashtool & u'll be okay.
U will find a tutorial video to change or add or reset your imel in youtube I have just made it because I faced some issue after flashing
Sent from my Lenovo A3000-H using XDA Free mobile app
Hello Sir thanks for the ROM. This ROM worked well. Camera is not working as u mention in the post. Other bug is sd card not working properly. Can u update this rom. pls
pLZ UPDATE THIS ASAP. PLZ
Great! Only complaint is camera, and the multi touch has reduced from 5 to 2, hopefully that will be fixed :/
I also have lenovo a3300,but have cwm installed ,so can i try it?
GV and HV Hardwares
der-mali said:
Will this ROM work for the A3300-GV, too?
Is the chip the same?
GV is the 2G Version, HV is the 3G Version, I think.
Click to expand...
Click to collapse
Well technically umts(3g) is not fully working in gv but it has! Dial it in your tab #*#*4636*#*# then tab info. Look for gsm(auto prl). Well gsm(auto prl) prioritized more of edge than 3g but its 3g.
Thank you!
The tablet is currently not with me (it is in the Philippines) but I will try out this.
Muy buena room cuando hay una actualización por eso de la cámara .
Y yo tengo un problema con el imei me pueden ayudar y no entra al modo ingeniero

Categories

Resources