Database Develop

[Q] How can I reinstall a good image after flashing my boot with CWM?

My question is similar to 'nikpmr's troubles but different enough I think they deserve a separate post.
The Problem as Understood​I was trying to root my device following the guide at this website. It's so simple it's a wonder I messed up. I think my failure was that I thought the drivers installed when I connected the phone were enough so I skipped that step. Then when running fastboot flash recovery.img the install failed. So I saw on some forum that it was supposed to be fastboot flash boot recovery.img of course now I know if anything it ought to have been "recovery" not "boot".
What I've Tried & Partial Solution​At first I was just stuck in a boot loop and selecting "sideload" from the CWM recovery failed to allow me to connect with ADB or fastboot. i.e. Running "fastboot devices" and "adb devices" both returned as having no devices connected to my computer. So I installed the HTC Sync and promptly uninstalled the non driver parts of the app. Then I installed USBdeview and used it to uninstall all the USB devices associated with my HTC First. After doing that I learned booting into HBOOT allowed me to connect to the computer using fastboot and after then booting to the CWM Recovery I was able to connect using ADB to do a sideload. So I guess I'm about halfway there. Unfortunately after looking up the newest RUU and attempting to sideload it using "adb sideload OTA_MYST_UL_1.08.502.1-1.08.502.4.zip" the sideload failed. After selecting "- install zip from sideload" I get a message twice of "failed to open driver control: No such file or directory". It also failed when I attempted it with a similar fastboot command. So from all that I surmise my ROM is ruined and just needs to be replaced.
Question​So how do I go about replacing this ROM and boot partition? And, which ROM should I use? Is the one I got from the RUU site suitable? And what about the radio? I just need my phone to work. I can worry about rooting later. At this point I think I know what's happened but I don't know where to begin reading to figure out how to fix it myself.
Thanks for reading,
Relevant HBOOT text:
Code:
*** TAMPERED ***
*** UNLOCKED ***
MYSTUL PVT SHIP S-ON RL
HBOOT-2.00.0000
RADIO-1.15.40.00.13_2
OpenDSP-v9.2.0268.1214
eMMC-boot
Mar 22 2013,21:29:50:1682

1. you had to type in fastboot flash recovery recovery.img NOT fastboot flash boot recovery.img

Well there was an actual all in 1 tool to get cwm/twrp & root with a click for this specific device somewhere around these threads.
1) what exactly is the problem? (Sorry it was just so many words)
I don't think side loading the RUU would work bc I haven't heard its possible to flash it in the phone itself.
2) why don't you just sideload an existing pre-rooted ROM instead of the RUU file?
3) I see you're s-on, did you try flashing just the boot.IMG from the ROM you've got on it?
BTW I've only had luck with twrp on having it successfully detected when wanting to sideload

abrahammmmmmm_ said:
Well there was an actual all in 1 tool to get cwm/twrp & root with a click for this specific device somewhere around these threads.
1) what exactly is the problem? (Sorry it was just so many words)
I don't think side loading the RUU would work bc I haven't heard its possible to flash it in the phone itself.
2) why don't you just sideload an existing pre-rooted ROM instead of the RUU file?
3) I see you're s-on, did you try flashing just the boot.IMG from the ROM you've got on it?
BTW I've only had luck with twrp on having it successfully detected when wanting to sideload
Click to expand...
Click to collapse
1) The issue is I did "fastboot flash boot recovery.img" rather than "fastboot flash recovery.img" now I don't seem to have a boot mount point.
2) That sounds best. I didn't realize the RUU want a flashable ROM. More I just have to find the updated stable stock ROM.
3) I didn't have a ROM on it. I was just trying to root stock. Seems like I'm pretty close once I find that ROM.
Thanks y'all! Between your answers I think I have enough to go on. Feel free to point me to your preferred stable ROM. I'm content with stock but it would be nice to have Tiranium BU.

bnjo said:
1) The issue is I did "fastboot flash boot recovery.img" rather than "fastboot flash recovery.img" now I don't seem to have a boot mount point.
2) That sounds best. I didn't realize the RUU want a flashable ROM. More I just have to find the updated stable stock ROM.
3) I didn't have a ROM on it. I was just trying to root stock. Seems like I'm pretty close once I find that ROM.
Thanks y'all! Between your answers I think I have enough to go on. Feel free to point me to your preferred stable ROM. I'm content with stock but it would be nice to have Tiranium BU.
Click to expand...
Click to collapse
Right now our most stable stock ROM is our rooted stock ROM
http://forum.xda-developers.com/showthread.php?t=2287811
We currently have 2 very able recognized devs working on CyanogenMod. You can expect something new in the near future but until then what I've showed you is the best.
Have any problems just come back to the thread

Success!
abrahammmmmmm_ said:
Right now our most stable stock ROM is our rooted stock ROM
http://forum.xda-developers.com/showthread.php?t=2287811
We currently have 2 very able recognized devs working on CyanogenMod. You can expect something new in the near future but until then what I've showed you is the best.
Have any problems just come back to the thread
Click to expand...
Click to collapse
Thanks guys I know I always like to know when something I said was successful in helping someone. I just wanted yall to know after sideloading the most recent Odexed ROM then pushing it to memory after it wouldn't boot I succeeded after taking abrahammmmmm's advice of flashing the boot.img from HBOOT. After a longer boot than I'm used to I was able to get into my phone again. I wasn't able to use my TitaniumBU to restore but that just meant I had to spend a few minutes selecting apps to install.. And restoring a data backup for the only important app that doesn't keep the primary data off the phone.
Thanks again!
tl;dr Flashing the Odexed ROM boot.img fixed my issues. Thx!

bnjo said:
Thanks guys I know I always like to know when something I said was successful in helping someone. I just wanted yall to know after sideloading the most recent Odexed ROM then pushing it to memory after it wouldn't boot I succeeded after taking abrahammmmmm's advice of flashing the boot.img from HBOOT. After a longer boot than I'm used to I was able to get into my phone again. I wasn't able to use my TitaniumBU to restore but that just meant I had to spend a few minutes selecting apps to install.. And restoring a data backup for the only important app that doesn't keep the primary data off the phone.
Thanks again!
tl;dr Flashing the Odexed ROM boot.img fixed my issues. Thx!
Click to expand...
Click to collapse
Great! glad to hear I could help. Yes it's always nice knowing when something I've said has helped someone in any way

bnjo said:
Thanks guys I know I always like to know when something I said was successful in helping someone. I just wanted yall to know after sideloading the most recent Odexed ROM then pushing it to memory after it wouldn't boot I succeeded after taking abrahammmmmm's advice of flashing the boot.img from HBOOT. After a longer boot than I'm used to I was able to get into my phone again. I wasn't able to use my TitaniumBU to restore but that just meant I had to spend a few minutes selecting apps to install.. And restoring a data backup for the only important app that doesn't keep the primary data off the phone.
Thanks again!
tl;dr Flashing the Odexed ROM boot.img fixed my issues. Thx!
Click to expand...
Click to collapse
i think what happened, when you typed in "fastboot flash boot recovery.img" is this
boot, is also known as kernel in aosp and rom building terms, because if you look inside a rom.zip, you will see that the kernel is the boot.img
so what happened is you flashed a recovery as kernel, and duh it wont boot cause if the kernel doesnt work, the os doesnt either
so what YOU did is you simply reflashed the stock kernel, usually after changing a kernel, it takes a while to boot cause...well you get it right?
the kernel is what android is based off of, kind of like ubuntu, its a linux os based on the original linux kernel.

russian392 said:
usually after changing a kernel, it takes a while to boot cause...well you get it right?
Click to expand...
Click to collapse
Yes I get it.
russian392 said:
i think what happened, when you typed in "fastboot flash boot recovery.img" is this
boot, is also known as kernel in aosp and rom building terms, because if you look inside a rom.zip, you will see that the kernel is the boot.img
so what happened is you flashed a recovery as kernel, and duh it wont boot cause if the kernel doesnt work, the os doesnt either
so what YOU did is you simply reflashed the stock kernel, usually after changing a kernel, it takes a while to boot cause...well you get it right?
the kernel is what android is based off of, kind of like ubuntu, its a linux os based on the original linux kernel.
Click to expand...
Click to collapse
That's what I thought happened. If I had stopped to read the help on fastboot before running "fastboot flash boot recovery.img" I wouldn't have made that mistake because I would have seen I wanted to flash recovery. One thing I *did not* know, which I'm glad to know, was that the boot.img contains the kernal. I was thinking Android was more similar to IBM style PCs than it is and therefore the boot.img was analogous to a bootloader like grub or lilo.
So the one thing I don't get is how is partitioning done? I take it Androids have some reserved partition for boot and the boot.img takes care of all system partitioning and mounts /sdcard/ for everything else. i.e. userland; appdata, media, and files. Am I guessing correctly?

bnjo said:
So the one thing I don't get is how is partitioning done? I take it Androids have some reserved partition for boot and the boot.img takes care of all system partitioning and mounts /sdcard/ for everything else. i.e. userland; appdata, media, and files. Am I guessing correctly?
Click to expand...
Click to collapse
in a nutshell yes, the boot.img uses the fstab
btw 10 posts you'll be "verified"

So the one thing I don't get is how is partitioning done? I take it Androids have some reserved partition for boot and the boot.img takes care of all system partitioning and mounts /sdcard/ for everything else. i.e. userland; appdata, media, and files. Am I guessing correctly?
Click to expand...
Click to collapse
Yep that's correct.
The name correlation is booting up requires kernel there for kernel is called beet.IMG
Thing about custom kernels, they aren't like that and simply contain modded files and pretty much an in packaged kernel.
Sent from my HTC first using xda app-developers app

stock recovery
please can anyone send me the stock recovery.img
when i try to get it from RUU it says archive is corrupted

astrit1995 said:
please can anyone send me the stock recovery.img
when i try to get it from RUU it says archive is corrupted
Click to expand...
Click to collapse
here:
http://androidfiles.org/getdownload.php?file=MystUL/Stock_Roms/stockrecovery.img
if you help, press thanks!!

Serupo said:
here:
http://androidfiles.org/getdownload.php?file=MystUL/Stock_Roms/stockrecovery.img
if you help, press thanks!!
Click to expand...
Click to collapse
Thank you for your help,i solved my problem yesterday but i think im gona need this sometime...

[Q] Couldnt Update to Lollipop, LF USA XT1063 Mirror

First of all I just bought Global Moto G 2014 (XT1063) from US Amazon and that was KXH21.85-23 (not updatable to Lollipop via shared OTA.)
So I did manage to unlocked the bootloader and flashed KXH21.85-17 and tried to flash the "Blur_Version.21.11.17.titan_retuglb.retuglb.en.US" which supposed to flash the Lollipop.
Unfortunately at first it failed to update me because "Printspooler.apk" mismatch the hash check. After attempt to flash (yes, I ignore the abort message and redo the process, It passed.... I don't know why) and stuck at some "xxx.apk" mismatch the hash again. After redo the process and bypass (for unknown reason that redo bypass the mismatch) I stuck at "velvet.apk" mismatch and this time It won't let me bypass and keep going on update to lollipop.
In my theory, Is it possible that I flash KXH21.85-17 from other country? Yes, any XT1063 (latin american, whereever on earth) supposed to flashable, but maybe the different country has slightly different apk. So that's why I failed the hash check.
Can anyone give me a URL or mirror to USA XT1063 for KXH21.85-17 that confirmed updatable to Lollipop? Since SBF-Dev and MotoFirmware is now down I couldn't find any.
I know what I'm saying is sound ridiculous, but I have no other theory that support my conspiracy anymore.

Hi @bankkung, I was facing similar problems. First you'd want to get back to stock kitkat which is up-gradable to Lollipop, so I would suggest downloading this file, http://180upload.com/bzl3ah1wov5g, which is 21.85-17, you can flash this file with fastboot by following this guide http://forum.xda-developers.com/moto-g-2014/general/index-guide-update-to-lollipop-android-t2941340. Next you'd want to download both Lollipop files, the first and second one. (The second one is the newest update that fixes memory management). First file: https://mega.co.nz/#!UoQ02KLQ!22OUNBctGLoAUOMd_frTRT9jgbB3tRPUa4pPqfesGho.. Second file: https://mega.co.nz/#!s8ZSVJDA!SqUWPZODvM4-GYuXo6MC2JWTmpE9_jdyqlH-ycWi78I. Download both of those files and put them somewhere accessible (like your SD card) so you can flash these in stock recovery, so after you downgrade to kitkat you can flash the first one, then boot up and then go back into stock recovery and flash the second file. I'd recommend factory resetting your phone after this to smoothen everything out.
If all else fails you can flash TWRP recovery using this guide http://forum.xda-developers.com/moto-g-2014/development/recovery-twrp-2-8-0-1-moto-g-2014-t2896165, and then download this TWRP backup of the latest Lollipop, and place it in /data/media/0/TWRP/backups/(your device name here). All of that can be done right in TWRP recovery using the file manager (no need to root your phone). https://mega.co.nz/#!59AAiQaR!cPUsNpI5j-ZaIMX10uiS93EJqpLxua-iwKHj30InX1U
I would really recommend the first option tho, just in case any other updates come you can easily upgrade your phone.
Hope I helped!

Lamech242 said:
Hi @bankkungFirst you'd want to get back to stock kitkat which is up-gradable to Lollipop, so I would suggest downloading this file, http://180upload.com/bzl3ah1wov5g, which is 21.85-17, you can flash this file with fastboot by following this guide http://forum.xda-developers.com/moto-g-2014/general/index-guide-update-to-lollipop-android-t2941340. Next you'd want to download both Lollipop files, the first and second one. (The second one is the newest update that fixes memory management). First file: https://mega.co.nz/#!UoQ02KLQ!22OUNBctGLoAUOMd_frTRT9jgbB3tRPUa4pPqfesGho.. Second file: https://mega.co.nz/#!s8ZSVJDA!SqUWPZODvM4-GYuXo6MC2JWTmpE9_jdyqlH-ycWi78I. Download both of those files and put them somewhere accessible (like your SD card) so you can flash these in stock recovery, so after you downgrade to kitkat you can flash the first one, then boot up and then go back into stock recovery and flash the second file. I'd recommend factory resetting your phone after this to smoothen everything out.
Click to expand...
Click to collapse
Hi Thanks for your help
I've done that several time and still having the same problem (yes, mine is unlocked bootloader and flashed-reflashed that 21.85-17 over twenty time right now)
Lamech242 said:
If all else fails you can flash TWRP recovery using this guide http://forum.xda-developers.com/moto-g-2014/development/recovery-twrp-2-8-0-1-moto-g-2014-t2896165, and then download this TWRP backup of the latest Lollipop, and place it in /data/media/0/TWRP/backups/(your device name here). All of that can be done right in TWRP recovery using the file manager (no need to root your phone). https://mega.co.nz/#!59AAiQaR!cPUsNpI5j-ZaIMX10uiS93EJqpLxua-iwKHj30InX1U
I would really recommend the first option tho, just in case any other updates come you can easily upgrade your phone.
Hope I helped!
Click to expand...
Click to collapse
I'm thinking about getting some Nandroid backup (never used TWRP before but I think this methond you gave is the same thing as I think) to get straight from Custom Recovery to Lollipop.
So what I need to do in the 2nd method is
a
flash TWRP
Place TWRP Backup of XT1063 Lollipop
restore
reflash Stock Recovery + Locked recovery
Is this sound corrected?

bankkung said:
Hi Thanks for your help
I've done that several time and still having the same problem (yes, mine is unlocked bootloader and flashed-reflashed that 21.85-17 over twenty time right now)
I'm thinking about getting some Nandroid backup (never used TWRP before but I think this methond you gave is the same thing as I think) to get straight from Custom Recovery to Lollipop.
So what I need to do in the 2nd method is
a
flash TWRP
Place TWRP Backup of XT1063 Lollipop
restore
reflash Stock Recovery + Locked recovery
Is this sound corrected?
Click to expand...
Click to collapse
Yes once you place the backup on your SD card, flash TWRP, reboot into recovery and go to advanced then go to file manager, then finish following the instructions above. Once you place it in the right place then you restore it. As of the stock recovery issue, it wouldn't make much sense to do that unless you followed the first option, where the stock recovery would actually be needed. But if you find a recovery image then yeah. If you do the second method you won't be able to receive updates nor update it manually unless doing the first method.. But the TWRP backup is the latest lollipop so enjoy!

If you still need help you can just flash TWRP recovery, and download this and flash it. http://forum.xda-developers.com/mot...-stock-rom-t2970427/post57438355#post57438355

Need help upgrading to 5.1, Tired of flashing all the things.

My nexus 6 is unlocked and is running stock 5.0.1, rooted. . It has twrp and is decrypted.
I tried to sideload the 5.1 ota but it doesnt work.
I tried flashing the new 5.1 factory image but that doesnt work.
I'm tired of all this now, I just want my phone running stock 5.1 , locked , encrypted ,unrooted so I can just get ota next time from Google whenever they send it out.
Any guidance on what I need to do would be appreciated.

Use Wug's Nexus Root Toolkit :good:
Edit : Now I'm currently "Optimising app..." loop.

I tried using tge NRT to flash it back to stock but it didn't work.

I would first make a TWRP backup, then I would flash the boot image (decrypted if you want and make sure its the new one), system, radio and then reboot. I flashed everything fine while keeping twrp on my phone but I didn't like not having a custom ROM plus it was a little laggy so I restored a TWRP backup. My phone did bootloop for a while but eventually it booted 5.1. I would be careful since 5.1 seems to be having some issues in general.

http://forum.xda-developers.com/nex...gs-nexus-root-toolkit-v1-9-8-t2947452/page101
Quote:
Originally Posted by baudi11
Same thing happened to me. Here's what I did.
1. Press and hold power, volume up, and volume down. Keep holding them down until the phone boots into bootloader mode.
2. Go back to the toolkit and click the radio button labeled "Soft bricked/bootloop"
3. Click "Flash stock plus unroot"
4. Check all the boxes under "Settings", including "Post-flash factory reset" then click OK.
5. Follow the toolkit instructions from there.
This got me out of the bootloop, successfully installed 5.1, and kept all my apps and settings. Good luck.
Click to expand...
Click to collapse
It worked for me after that. Now I'm booted in 5.1

When I try to flash the factory images directly from Google I get the following errors even though the MD5 checks out.
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
failed to allocate 1778070480 bytes
error: update package missing system.img
Press any key to exit...

celeriL said:
http://forum.xda-developers.com/nex...gs-nexus-root-toolkit-v1-9-8-t2947452/page101
It worked for me after that. Now I'm booted in 5.1
Click to expand...
Click to collapse
Thanks so much! This worked perfectly. Exactly what I needed. The past couple days have been so annoying but now it's over. Thanks again!

Giuseppe1010 said:
Thanks so much! This worked perfectly. Exactly what I needed. The past couple days have been so annoying but now it's over. Thanks again!
Click to expand...
Click to collapse
Glad to help!

You also could have extracted the zip and manually flashed the images ing fastboot
fastboot flash recovery recovery.img
fastboot flash system system.img
Etc

rootSU said:
You also could have extracted the zip and manually flashed the images ing fastboot
fastboot flash recovery recovery.img
fastboot flash system system.img
Etc
Click to expand...
Click to collapse
HaHaa. Tried and true. Always works.

prdog1 said:
HaHaa. Tried and true. Always works.
Click to expand...
Click to collapse
rootSU said:
You also could have extracted the zip and manually flashed the images ing fastboot
fastboot flash recovery recovery.img
fastboot flash system system.img
Etc
Click to expand...
Click to collapse
I agree that always works without fail and is much easier than a tool kit. I don't like tool kits because people need to learn the correct way to flash things before using one because its better to understand what you are flashing should there be an error.

Pilz said:
I agree that always works without fail and is much easier than a tool kit. I don't like tool kits because people need to learn the correct way to flash things before using one because its better to understand what you are flashing should there be an error.
Click to expand...
Click to collapse
I totally agree. Have done successful manual flash when tool kits failed. Seen on Nexus 6 already.Saved my soft brick with manual flash when tool kit failed.

Pilz said:
I agree that always works without fail and is much easier than a tool kit. I don't like tool kits because people need to learn the correct way to flash things before using one because its better to understand what you are flashing should there be an error.
Click to expand...
Click to collapse
I don't have anything against toolkits on some devices, so long as it is not used as a shortcut to learning the basics. That said, on a nexus, I don't really see any need to be honest.

rootSU said:
I don't have anything against toolkits on some devices, so long as it is not used as a shortcut to learning the basics. That said, on a nexus, I don't really see any need to be honest.
Click to expand...
Click to collapse
Thats how I feel because its so easy my wife could do it and she doesn't know anything about flashing. Toolkits are good for non Nexus devices, I just don't see a point when we need to learn things the correct way first.
I hope the bugs get sorted out so people don't hard brick their phones anyone

rootSU said:
You also could have extracted the zip and manually flashed the images ing fastboot
fastboot flash recovery recovery.img
fastboot flash system system.img
Etc
Click to expand...
Click to collapse
Im a complete fastboot novice since this is my first nexus device (always had samsung phones up until now) and although I managed to root and unlock the boot loader I want to make sure I learn all the basics including flashing (side loading?) subsequent updates.
So Im currently rooted, unlocked bootloader on a 5.01. custom rom. How would I go about flashing the 5.1 update manually?
Im assuming that once I extract the update zip file I will find all the images that need to be flashed....what order do i do them in? How do I take into account the boot loader locking issue people have been facing that results in a bricked device?
Thanks in advance.
EDIT: I found this thread which outlines what I need to do http://forum.xda-developers.com/nexus-6/general/using-image-to-update-nexus-6-data-loss-t3053158
I only have two question now:
1. Im assuming the system image will wipe out the custom rom im on but not the data will leaving the data cause a problem? whats the command line to wipe data?
2. This doesnt address the boot loader locking issue causing a brick that people have been facing. This process involves updating the boot loader what do i have to do to make sure I dont brick my device?
Thanks again

kingofkings11 said:
Im a complete fastboot novice since this is my first nexus device (always had samsung phones up until now) and although I managed to root and unlock the boot loader I want to make sure I learn all the basics including flashing (side loading?) subsequent updates.
So Im currently rooted, unlocked bootloader on a 5.01. custom rom. How would I go about flashing the 5.1 update manually?
Im assuming that once I extract the update zip file I will find all the images that need to be flashed....what order do i do them in? How do I take into account the boot loader locking issue people have been facing that results in a bricked device?
Thanks in advance.
EDIT: I found this thread which outlines what I need to do http://forum.xda-developers.com/nexus-6/general/using-image-to-update-nexus-6-data-loss-t3053158
I only have two question now:
1. Im assuming the system image will wipe out the custom rom im on but not the data will leaving the data cause a problem? whats the command line to wipe data?
2. This doesnt address the boot loader locking issue causing a brick that people have been facing. This process involves updating the boot loader what do i have to do to make sure I dont brick my device?
Thanks again
Click to expand...
Click to collapse
You could simply not update the bootloader. Bare minimum requirements is update system and boot (kernel). if you want to learn more about fastboot, go to general > All in one guide > Question 28.
If you do not update the bootloader, you'll never get an OTA but it doesn't seem like you're wanting that anyway.
In regards to data, yes it could cause a problem if you're using a custom rom. You can use fastboot erase data command. This also wipes your /sdcard though.

HELPPP!

So I feel like I am really screwed on this.... attempted flashing stock via RSDLite. It began flashing fine until about halfway through the system.img ...all of a sudden it loses fastboot and my computer freaks out saying that an unkown standard usb device is attached. I figured that I would just flash a batch through recovery, but now there is not recovery image either.
So... I have no fastboot mode and no recovery mode and an unrecognizable usb device. Please help me
Edit: I have a feeling its due to a driver issue... during the downgrade the required driver probably changed... and thus disconnected in the middle of flash. If this is the case, then I feel like an idiot

diabl0w said:
So I feel like I am really screwed on this.... attempted flashing stock via RSDLite. It began flashing fine until about halfway through the system.img ...all of a sudden it loses fastboot and my computer freaks out saying that an unkown standard usb device is attached. I figured that I would just flash a batch through recovery, but now there is not recovery image either.
So... I have no fastboot mode and no recovery mode and an unrecognizable usb device. Please help me
Click to expand...
Click to collapse
Try setting up another computer. You should be able to go into bootlader mode by pressing power and volume down buttons at the same time. Hopefully you have enought battery. If that doesnt work someone should be able to help you out.

Downgrading the bootloader on Motorola devices (Nexus 6 included) results in a permanent (well, unless you can upgrade the bootloader to what it was originally) brick.

r3pwn said:
Downgrading the bootloader on Motorola devices (Nexus 6 included) results in a permanent (well, unless you can upgrade the bootloader to what it was originally) brick.
Click to expand...
Click to collapse
Wow I hope that my edit was right instead... I know for a fact that it failed during the system image portion of the flash. all I did was follow the instructions posted somewhere on this forum which basically just said... download 21.12 firmware, go to fastboot, flash with rsdlite. Guess the fact that they left out remove bootloader image is no big deal.. NOT

diabl0w said:
Wow I hope that my edit was right instead... I know for a fact that it failed during the system image portion of the flash. all I did was follow the instructions posted somewhere on this forum which basically just said... download 21.12 firmware, go to fastboot, flash with rsdlite. Guess the fact that they left out remove bootloader image is no big deal.. NOT
Click to expand...
Click to collapse
It's nothing they did wrong. At the time of writing it, that was probably the latest version. Can you still flash things via rsdlite? If so, take a look at this copy of the latest update.

r3pwn said:
It's nothing they did wrong. At the time of writing it, that was probably the latest version. Can you still flash things via rsdlite? If so, take a look at this copy of the latest update.
Click to expand...
Click to collapse
Okay so good news... I installed the older sdk drivers and my phone will now connect to fastboot mode again. wooo!!! Now, to make sure I do this right, @r3pwn , the link you just sent me was a superuser image, right? Background story as to why I am doing this, I have root and I ended up breaking google play services pretty bad and reinstalling would not fix the problem and neither would cache clear or system.img flash. So I was just gonna try to start fresh. So, I attempted to flash 21.12 firmware and thats how I ended up here. What should I do next? Flash that SU firmware or flash the 21.12 firmware? Should I remove the bootloader and boot images from those .xml files? Thanks for your time, I should be good after that information

diabl0w said:
Okay so good news... I installed the older sdk drivers and my phone will now connect to fastboot mode again. wooo!!! Now, to make sure I do this right, @r3pwn , the link you just sent me was a superuser image, right? Background story as to why I am doing this, I have root and I ended up breaking google play services pretty bad and reinstalling would not fix the problem and neither would cache clear or system.img flash. So I was just gonna try to start fresh. So, I attempted to flash 21.12 firmware and thats how I ended up here. What should I do next? Flash that SU firmware or flash the 21.12 firmware? Should I remove the bootloader and boot images from those .xml files? Thanks for your time, I should be good after that information
Click to expand...
Click to collapse
That's not the root firmware, that's just plain stock. I would recommend you flash that image (the one I linked) then re-root.

r3pwn said:
That's not the root firmware, that's just plain stock. I would recommend you flash that image (the one I linked) then re-root.
Click to expand...
Click to collapse
I realized that after I downloaded the file and took a look at it further... thanks for your help and for bearing with me. It worked!

{SOLVED}PLEASE READ Bricked My phone. A help please **URGENT**

**URGENT** i have my p20 pro 6/128 with 9.0 last version ROOTED somehow i found a article.. the root was success. Tried to flash official twrp with twrp app and then everything was like HELL.
If i let my phone boot says error! func no: 10 boot image. error no :2 load failed. i faced something simillar when trying to get into recovery sometimes.
I can get into erecovery cant format or download official firmware. I can get into fastboot, download mode. I am gonna tell you everything . every program i tried AND FAILED!
TRIED: multi tool for huawei ( i download a version i think its 165 something when i press flash selected the program closed)
TRIED: to FLASH like 10 times ramdisks, recoverys, CANT FIND BOOT.IMG.
TRIED: Re-flash 9.0 says missing zip files THATS IMPOSIMPLE NOTHING IS MISSING I AM SURE
TRIED: a guide that said to download firmware and i would find a folder named DLOAD. i did everything. COULDNT FLASH SOMETHING ON DOWNLOAD SAYS ERROR
TRIED: ALMOST EVERYTHING
PLEASE HELP ME, HOW TO FIX IT? its very important for me and for everyone who is facing the same problem
Phone infos From Multi tool program http://prntscr.com/min398
and the firmwares i tried 1) http://prntscr.com/min3tn
2) http://prntscr.com/min40j
SEE SOME POSTS BELLOW TO SEE HOW I FIXED IT SUCCESS AFTER MANY ERRORS

1 found this post, and flashed all of them BUT there is not ramdisk on the files. i looked on two different firmwares which should i flash over ramdisk which doesnt exist?
first i run the command fastboot flash kernel kernel.img and i could boot into TWRP for first time. now i cant.
there are not errors for now. only if i boot my phone says phone keeping booting.
when i got to twrp and tried to reboot into system said there is no OS.
How and which os i should flash? since Multi tool program kicks me
HELP
https://forum.xda-developers.com/honor-9/help/help-softbricked-h9-oreo-t3750282

So you're typing a little erratic.
Can you get to eRecovery? This is your best option..
If not then you'll need to reflash all the parts of the OS back to the phone manually..
Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.

dladz said:
So you're typing a little erratic.
Can you get to eRecovery? This is your best option..
If not then you'll need to reflash all the parts of the OS back to the phone manually..
Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.
Click to expand...
Click to collapse
i can get into erecovery i cannot download the official and flash it throught there says error.. what else i can do
I cant understand what yyou saying here Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.
I get into Erecovery if i press download latest version and recovery after some times when i put the wifi pass says error. Error i got also on HIsUite when i tried to format from there and download the latest versio. So we go manually but HOW? i tried almost everything

i tried this https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
success all command went trhough the phone
the problem is i cannot flash twrp
my phone has unlocked bl

well i did a lot of search if you ask me i download 5-7 different programs that can flash stock firmware. ONE seems to be legit for 9.0 RE-flash 9.0 which has commands on its script like this guy says and he helped me too
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
also if someone cant boot into twrp after the frist steps and see the erecovery just format everything from erecovery and then it will boot to twrp.
also now says installing update.
i hope imeis serial numbers etc wont lost..
Thats the script i found i dont remeber where
http://prntscr.com/mitvum
but i can upload somewhere the files
if you run FLASH.bat and says MISSING ZIPS then remove the update."zip" {ZIP PREFIX FROM THE NAME OF THE FILES ONLY} and run again the bat
the procedure may take 10-30 mins

What about the otg method?
Also I would never use a tool like this.

StonebridgeGr said:
**URGENT** i have my p20 pro 6/128 with 9.0 last version ROOTED somehow i found a article.. the root was success. Tried to flash official twrp with twrp app and then everything was like HELL.
If i let my phone boot says error! func no: 10 boot image. error no :2 load failed. i faced something simillar when trying to get into recovery sometimes.
I can get into erecovery cant format or download official firmware. I can get into fastboot, download mode. I am gonna tell you everything . every program i tried AND FAILED!
TRIED: multi tool for huawei ( i download a version i think its 165 something when i press flash selected the program closed)
TRIED: to FLASH like 10 times ramdisks, recoverys, CANT FIND BOOT.IMG.
TRIED: Re-flash 9.0 says missing zip files THATS IMPOSIMPLE NOTHING IS MISSING I AM SURE
TRIED: a guide that said to download firmware and i would find a folder named DLOAD. i did everything. COULDNT FLASH SOMETHING ON DOWNLOAD SAYS ERROR
TRIED: ALMOST EVERYTHING
PLEASE HELP ME, HOW TO FIX IT? its very important for me and for everyone who is facing the same problem
Phone infos From Multi tool program http://prntscr.com/min398
and the firmwares i tried 1) http://prntscr.com/min3tn
2) http://prntscr.com/min40j
SEE SOME POSTS BELLOW TO SEE HOW I FIXED IT SUCCESS AFTER MANY ERRORS
Click to expand...
Click to collapse
dladz said:
What about the otg method?
Also I would never use a tool like this.
Click to expand...
Click to collapse
like i said in the first post the otg method with the dload folder failed.
Why you wouldnt try it?

StonebridgeGr said:
like i said in the first post the otg method with the dload folder failed.
Why you wouldnt try it?
Click to expand...
Click to collapse
Because I've got no need to mate, manual is always safer.
Have you asked in the thread where you got the tool?
I'm not sure what else to suggest pal

dladz said:
Because I've got no need to mate, manual is always safer.
Have you asked in the thread where you got the tool?
I'm not sure what else to suggest pal
Click to expand...
Click to collapse
now everything is fine but i cant root..

StonebridgeGr said:
now everything is fine but i cant root..
Click to expand...
Click to collapse
Everything is fine? What did you do?
With root Judy follow the instructions that have worked for other people. Don't rush things.

dladz said:
Everything is fine? What did you do?
With root Judy follow the instructions that have worked for other people. Don't rush things.
Click to expand...
Click to collapse
i post i early post a link that helped me a little bit i think i edited the .bat script
also i made a video and post about rooting and everything is fine.
the problem is you can have twrp and magisk root both:/
either you have root and not twrp or either you have twrp and not root