Related
I do the whole process, but the error does not come out of this part, I waited 5 minutes. what can be? gingerdx tried the v19 and 2.1 (backup made before installing the ROM).
I'am using Stock 2.1 and gingerdx v19...
error:
process requires standard 2.x android firmware.
Pressione qualquer tecla para continuar. . .
Getting ROOT rights.
* daemon not running. starting it now *
* daemon started successfully *
5 minutes...
new error........kkkkk
process requires standard 2.x android firmware.
Pressione qualquer tecla para continuar. . .
Getting ROOT rights.
1153 KB/s (585731 bytes in 0.496s)
- exec '/system/bin/sh' failed: No such file or directory (2)
-
- exec '/system/bin/sh' failed: No such file or directory (2)
-
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent.
Require ROOT rights
.
343 KB/s (3087 bytes in 0.008s)
- exec '/system/bin/sh' failed: No such file or directory (2)
-
- exec '/system/bin/sh' failed: No such file or directory (2)
-
- exec '/system/bin/sh' failed: No such file or directory (2)
-
Waiting ...
Getting ROOT rights.
- exec '/system/bin/sh' failed: No such file or directory (2)
-
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
733 KB/s (8064 bytes in 0.010s)
- exec '/system/bin/sh' failed: No such file or directory (2)
-
- exec '/system/bin/sh' failed: No such file or directory (2)
-
Second, we need to write semcboot
1289 KB/s (596916 bytes in 0.452s)
- exec '/system/bin/sh' failed: No such file or directory (2)
-
- exec '/system/bin/sh' failed: No such file or directory (2)
-
Pressione qualquer tecla para continuar. . .
wlon said:
process requires standard 2.x android firmware.
Pressione qualquer tecla para continuar. . .
Getting ROOT rights.
1153 KB/s (585731 bytes in 0.496s)
- exec '/system/bin/sh' failed: No such file or directory (2)
-
- exec '/system/bin/sh' failed: No such file or directory (2)
-
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent.
Require ROOT rights
.
343 KB/s (3087 bytes in 0.008s)
- exec '/system/bin/sh' failed: No such file or directory (2)
-
- exec '/system/bin/sh' failed: No such file or directory (2)
-
- exec '/system/bin/sh' failed: No such file or directory (2)
-
Waiting ...
Getting ROOT rights.
- exec '/system/bin/sh' failed: No such file or directory (2)
-
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
733 KB/s (8064 bytes in 0.010s)
- exec '/system/bin/sh' failed: No such file or directory (2)
-
- exec '/system/bin/sh' failed: No such file or directory (2)
-
Second, we need to write semcboot
1289 KB/s (596916 bytes in 0.452s)
- exec '/system/bin/sh' failed: No such file or directory (2)
-
- exec '/system/bin/sh' failed: No such file or directory (2)
-
Pressione qualquer tecla para continuar. . .
Click to expand...
Click to collapse
i got same output. they say i should try with stock ROM
well i didnt try since then.
Make backup.
Use PC Companion to reset your device.
Use new Flashtool to root it.
Run unlock utility.
make sure PC Companion detect your device
worked, thanks for the help guys!!
i succesfuly unlocked bootloader too.
confirmed again
installed stock 2.1 version of software (with SEUS)
update flashtool to 0.5.3. ...
root
unlock bootloader
Code:
25/031/2011 10:31:24 - INFO - <- This level is successfully initialized
25/031/2011 10:31:26 - INFO - Device connected with USB debugging on
25/031/2011 10:31:27 - INFO - Connected device : E15
25/031/2011 10:31:27 - INFO - Installed version of busybox : BusyBox v1.19.0 (2011-08-14 23:46:58 CDT) multi-call binary.
25/031/2011 10:31:27 - INFO - Android version : 2.1-update1 / kernel version : 2.6.29
25/031/2011 10:31:27 - INFO - Root Access Allowed
25/031/2011 10:31:41 - INFO - Searching Xperia....
25/031/2011 10:31:41 - ERROR - Please plug you device in flash mode
25/031/2011 10:31:42 - INFO - Searching Xperia....
25/032/2011 10:32:06 - INFO - Found at USB\VID_0FCE&PID_ADDE\6&DF2EE03&0&7
25/032/2011 10:32:06 - INFO - VER="R8A029";DATE="20100601";TIME="12:17:00";
25/032/2011 10:32:06 - INFO - Start Reading property
25/032/2011 10:32:06 - INFO - Reading property finished.
25/032/2011 10:32:06 - INFO - Found semcSL
25/032/2011 10:32:06 - INFO - You can now unplug and turn on device, then plug it again
25/032/2011 10:32:06 - INFO - Waiting for device
25/032/2011 10:32:06 - INFO - Device connected in flash mode
25/032/2011 10:32:34 - INFO - Device disconnected
25/033/2011 10:33:31 - INFO - Device connected with USB debugging on
25/033/2011 10:33:33 - INFO - Pushing C:\Flashtool\custom\features\UnlockBL\files\my7227\my7227bootwrite_semcSL to /data/local/tmp
25/033/2011 10:33:33 - INFO - Pushing C:\Flashtool\custom\features\UnlockBL\files\my7227\mapper_2.6.29.ko to /data/local/tmp
25/033/2011 10:33:33 - INFO - Pushing C:\Flashtool\custom\features\UnlockBL\files\my7227\fixPart to /data/local/tmp
25/033/2011 10:33:34 - INFO - Running runfixPart as root thru sysrun
25/033/2011 10:33:34 - INFO - Successfully applied fixPart. Rebooting
25/033/2011 10:33:35 - INFO - Waiting for device
25/033/2011 10:33:37 - INFO - Device disconnected
25/033/2011 10:33:47 - INFO - Device connected with USB debugging off
25/033/2011 10:33:57 - INFO - Device connected with USB debugging on
25/034/2011 10:34:20 - INFO - Running runbootwrite as root thru sysrun
25/034/2011 10:34:22 - INFO - Successfully applied unlock. Rebooting
25/034/2011 10:34:22 - INFO - Running runClean as root thru sysrun
25/034/2011 10:34:24 - INFO - Device disconnected
25/034/2011 10:34:34 - INFO - Device connected with USB debugging off
25/035/2011 10:35:37 - INFO - Device disconnected
25/035/2011 10:35:41 - INFO - Device connected with USB debugging off
-----------------------------------------------------------
s1tool log
-----------------------------------------------------------
Welcome to S1 identify tool
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "R4A045"
MODEL (from GDFS): E15i
SOFTWARE VERSION: 1236-9291_2.1.1.A.0.6
CUSTOM VERSION: 1241-4047_R2B
FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.6
SERIAL NO: BX902D6JL1
SEMC SIMLOCK CERTIFICATE
Elapsed:29 secs.
thaks developers
gferen said:
i succesfuly unlocked bootloader too.
confirmed again
installed stock 2.1 version of software (with SEUS)
update flashtool to 0.5.3. ...
root
unlock bootloader
Code:
25/031/2011 10:31:24 - INFO - <- This level is successfully initialized
25/031/2011 10:31:26 - INFO - Device connected with USB debugging on
25/031/2011 10:31:27 - INFO - Connected device : E15
25/031/2011 10:31:27 - INFO - Installed version of busybox : BusyBox v1.19.0 (2011-08-14 23:46:58 CDT) multi-call binary.
25/031/2011 10:31:27 - INFO - Android version : 2.1-update1 / kernel version : 2.6.29
25/031/2011 10:31:27 - INFO - Root Access Allowed
25/031/2011 10:31:41 - INFO - Searching Xperia....
25/031/2011 10:31:41 - ERROR - Please plug you device in flash mode
25/031/2011 10:31:42 - INFO - Searching Xperia....
25/032/2011 10:32:06 - INFO - Found at USB\VID_0FCE&PID_ADDE\6&DF2EE03&0&7
25/032/2011 10:32:06 - INFO - VER="R8A029";DATE="20100601";TIME="12:17:00";
25/032/2011 10:32:06 - INFO - Start Reading property
25/032/2011 10:32:06 - INFO - Reading property finished.
25/032/2011 10:32:06 - INFO - Found semcSL
25/032/2011 10:32:06 - INFO - You can now unplug and turn on device, then plug it again
25/032/2011 10:32:06 - INFO - Waiting for device
25/032/2011 10:32:06 - INFO - Device connected in flash mode
25/032/2011 10:32:34 - INFO - Device disconnected
25/033/2011 10:33:31 - INFO - Device connected with USB debugging on
25/033/2011 10:33:33 - INFO - Pushing C:\Flashtool\custom\features\UnlockBL\files\my7227\my7227bootwrite_semcSL to /data/local/tmp
25/033/2011 10:33:33 - INFO - Pushing C:\Flashtool\custom\features\UnlockBL\files\my7227\mapper_2.6.29.ko to /data/local/tmp
25/033/2011 10:33:33 - INFO - Pushing C:\Flashtool\custom\features\UnlockBL\files\my7227\fixPart to /data/local/tmp
25/033/2011 10:33:34 - INFO - Running runfixPart as root thru sysrun
25/033/2011 10:33:34 - INFO - Successfully applied fixPart. Rebooting
25/033/2011 10:33:35 - INFO - Waiting for device
25/033/2011 10:33:37 - INFO - Device disconnected
25/033/2011 10:33:47 - INFO - Device connected with USB debugging off
25/033/2011 10:33:57 - INFO - Device connected with USB debugging on
25/034/2011 10:34:20 - INFO - Running runbootwrite as root thru sysrun
25/034/2011 10:34:22 - INFO - Successfully applied unlock. Rebooting
25/034/2011 10:34:22 - INFO - Running runClean as root thru sysrun
25/034/2011 10:34:24 - INFO - Device disconnected
25/034/2011 10:34:34 - INFO - Device connected with USB debugging off
25/035/2011 10:35:37 - INFO - Device disconnected
25/035/2011 10:35:41 - INFO - Device connected with USB debugging off
-----------------------------------------------------------
s1tool log
-----------------------------------------------------------
Welcome to S1 identify tool
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "R4A045"
MODEL (from GDFS): E15i
SOFTWARE VERSION: 1236-9291_2.1.1.A.0.6
CUSTOM VERSION: 1241-4047_R2B
FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.6
SERIAL NO: BX902D6JL1
SEMC SIMLOCK CERTIFICATE
Elapsed:29 secs.
thaks developers
Click to expand...
Click to collapse
This worked for me to!
I used msm7227_semc.cmd and my sim lock is not locked so,i bought it with sim lock locked but with this method it didn't locked it again.Tnx
maybe you must check from the earlier step man.
1. Root your phone, you can use flash tool or super one click
2. make sure unlock bootloader
3. follow the instruction from you flash tool
4. than you can flash your kernel
5. flash your rom
6. dont' forget to wipe
read this http://forum.xda-developers.com/showthread.php?t=1254225
hope it can help you...
take it easy man because I had bricked my phone 3 times..but it stilll okay
rav3n_pl said:
Make backup.
Use PC Companion to reset your device.
Use new Flashtool to root it.
Run unlock utility.
Click to expand...
Click to collapse
pc companion to reset , how ?
help here, still noob
phycro.sync said:
pc companion to reset , how ?
help here, still noob
Click to expand...
Click to collapse
just flash the X8 E15i 2.1.1.C.0.0._un.ftf to go back on 2.1 firmware
download from my signature
zzzzzzzzzzzzzzz thread from 2011
from ROM gingerdx v031 ,.stock kernel
can it still reset like normally ?
Sent from my GT-I8150 using xda app-developers app
phycro.sync said:
from ROM gingerdx v031 ,.stock kernel
can it still reset like normally ?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
U must go back to stock rom with help of pc companion or flashtool
Sent from my E15i
phycro.sync said:
pc companion to reset , how ?
help here, still noob
Click to expand...
Click to collapse
It was in PCC menu, "rescue device" or something. Look @ menu
Since I cannot reply to this thread:
http://forum.xda-developers.com/showthread.php?t=2440375
I created this topic.
My problem is that the older kernel wont flash. Check this log:
Code:
12/059/2013 21:59:11 - INFO - <- This level is successfully initialized
12/059/2013 21:59:11 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
12/059/2013 21:59:15 - INFO - Device connected with USB debugging on
12/059/2013 21:59:16 - INFO - Connected device : Sony Xperia SP
12/059/2013 21:59:16 - INFO - Installed version of busybox : N/A
12/059/2013 21:59:16 - INFO - Android version : 4.1.2 / kernel version : 3.4.0-perf-g1285c6c-01110-g8395f64 / Build number : 12.0.A.2.254
12/016/2013 22:16:10 - INFO - Selected XperiaSP_C530X / 12.0.A.1.257 / KernelOnly
12/016/2013 22:16:10 - INFO - Preparing files for flashing
12/016/2013 22:16:10 - INFO - Please connect your device into flashmode.
12/016/2013 22:16:21 - INFO - Device disconnected
12/016/2013 22:16:58 - INFO - Device connected in flash mode
12/016/2013 22:16:58 - INFO - Opening device for R/W
12/016/2013 22:16:58 - INFO - Reading device information
12/016/2013 22:16:58 - INFO - Phone ready for flashmode operations.
12/016/2013 22:16:59 - INFO - Current device : C5303 - CB512482RP - 1272-4687_R13A - 1269-3538_12.0.A.1.257 - GLOBAL-LTE_12.0.A.2.254
12/016/2013 22:16:59 - INFO - Start Flashing
12/016/2013 22:16:59 - INFO - Processing loader
12/016/2013 22:16:59 - INFO - Checking header
12/016/2013 22:16:59 - INFO - Flashing data
12/017/2013 22:17:03 - INFO - Loader : S1_Root_7054 - Version : R5G006 / Bootloader status : ROOTABLE
12/017/2013 22:17:04 - INFO - Processing kernel.sin
12/017/2013 22:17:04 - INFO - Checking header
12/017/2013 22:17:04 - INFO - Flashing data
12/017/2013 22:17:06 - INFO - Ending flash session
12/017/2013 22:17:06 - INFO - Flashing finished.
12/017/2013 22:17:06 - INFO - Please unplug and start your phone
12/017/2013 22:17:06 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
12/017/2013 22:17:06 - INFO - Device connected in flash mode
12/017/2013 22:17:24 - INFO - Log written to C:\Flashtool\flashtool_2013-09-12_09-59-11.log
12/018/2013 22:18:01 - INFO - Device disconnected
12/020/2013 22:20:15 - INFO - Device connected with USB debugging on
12/020/2013 22:20:16 - INFO - Connected device : Sony Xperia SP
12/020/2013 22:20:16 - INFO - Installed version of busybox : N/A
12/020/2013 22:20:16 - INFO - Android version : 4.1.2 / kernel version : 3.4.0-perf-g1285c6c-01110-g8395f64 / Build number : 12.0.A.2.254
I continued to using the DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip and everything looked like it went well but after the phone rebooted it wasn't rooted and the firmware still said 12.0.A.2.254. SuperSU wont start.
The script log:
Code:
---------------------------------------------------------------
Easy Rooting toolkit (v18.0)
created by DooMLoRD
"pref_event exploit"
Credits go to all those involved in making this possible!
---------------------------------------------------------------
Special thanks to: the_laser, Bin4ry, fi01, hiikezoe, [NUT]
and to all those who are contributing to our git tree!
Sources: https://github.com/android-rooting-tools
---------------------------------------------------------------
[*] This script will:
(1) root ur device using the pref_event exploit
(2) install Busybox
(3) install SU files
[*] Before u begin:
(1) make sure u have installed adb drivers for ur device
(2) enable "USB DEBUGGING"
from (Menu\Settings\Developer Options)
(3) enable "UNKNOWN SOURCES"
from (Menu\Settings\Security)
(4) connect USB cable to PHONE and then connect to PC
(5) skip "PC Companion Software" prompt on device
---------------------------------------------------------------
CONFIRM ALL THE ABOVE THEN
Press any key to continue . . .
--- STARTING ----
--- WAITING FOR DEVICE
* daemon not running. starting it now *
* daemon started successfully *
--- creating temporary directory
mkdir failed for tmp, File exists
--- cleaning
--- pushing files
81 KB/s (326 bytes in 0.003s)
394 KB/s (1578 bytes in 0.003s)
2188 KB/s (26268 bytes in 0.011s)
3808 KB/s (853044 bytes in 0.218s)
4673 KB/s (112164 bytes in 0.023s)
5250 KB/s (1953159 bytes in 0.363s)
--- DooMing device!
--- Correcting permissions
--- Running exploit
run_root_shell v7.0 (20130731)
Based on pref_event exploit
Modified for auto-rooting by DooMLoRD
Part of Easy Rooting Toolkit
Devices Supported:
Xperia Z (C6602/3) - 10.3.A.0.423
Xperia Z (C6606) - 10.1.1.B.0.166
Xperia Z (C6602/3) - 10.1.1.A.1.253/307
Xperia ZL (C6502/3/6) - 10.3.A.0.423
Tablet Z (SGP321) - 10.1.1.A.1.307
Tablet Z (SGP311/2) - 10.1.C.0.370
Xperia ZR (C5502/3/M36h) - 10.1.1.A.1.310
Xperia SP (C5302/3/6) - 12.0.A.1.211/257/284
Xperia L (C2104/5) - 15.0.A.1.31/36
Xperia T (LT30p) - 9.1.A.1.141/142/145
Xperia TX (LT29i) - 9.1.B.1.67
Xperia V (LT25i) - 9.1.A.1.140/142/145
Xperia S (LT26i) - 6.2.B.0.200/211
Xperia SL (LT26ii) - 6.2.B.0.211
Xperia Acro S (LT26w) - 6.2.B.0.200/211
Xperia Ion (LT28h/i) - 6.2.B.0.211
Xperia P (LT22i) - 6.2.A.1.100
Xperia Go (ST27i/a) - 6.2.A.1.100
Xperia J (ST26i/a) - 11.2.A.0.21/31
Xperia AX (SO-01E) - 10.1.D.0.343
Tablet Z (SO-03E) - 10.1.E.0.265/269
Xperia GX (SO-04D) - 7.0.D.1.137
Xperia A (SO-04E) - 10.1.1.D.0.179
Xperia A (SO-04E) - 10.1.1.D.2.26
Xperia SX (SO-05D) - 7.0.D.1.137
Xperia SX (SO-05D) - 9.1.C.0.475
Xperia VL (SOL21) - 9.0.F.0.226
Xperia VL (SOL21) - 9.1.D.0.395/401
Xperia UL (SOL22) - 10.2.F.3.43
Changelog is posted here: http://bit.ly/ert_log
Device detected: C5303 (12.0.A.1.257)
Attempt perf_swevent exploit...
writing address is 8e49
Launching auto-root script!
---------------------------------------------------------------
Launching final rooting process...
---------------------------------------------------------------
--- Rooting!
--- Remounting rootfs
--- Killing RIC service (specific for new Xperia devices)
Unable to chmod /sbin/ric: No such file or directory
--- Installing busybox
--- Remounting /system
--- copying busybox to /system/xbin/
1666+1 records in
1666+1 records out
853044 bytes transferred in 0.037 secs (23055243 bytes/sec)
--- correcting ownership
--- correcting permissions
--- installing busybox
--- pushing SU binary
rm failed for /system/xbin/su, No such file or directory
219+1 records in
219+1 records out
112164 bytes transferred in 0.005 secs (22432800 bytes/sec)
--- correcting ownership
--- correcting permissions
--- correcting symlinks
rm failed for /system/bin/su, No such file or directory
--- pushing Superuser app
3814+1 records in
3814+1 records out
1953159 bytes transferred in 0.092 secs (21229989 bytes/sec)
--- correcting permissions
--- DONE!
Exiting..
--- cleaning
--- Please wait device is now rebooting
ALL DONE!!!
Press any key to continue . . .
Strange since the script says "Device detected: C5303 (12.0.A.1.257)"
I have a locked bootloader since I read that it shouldn't be a problem
EDIT: Even more strange. Now after the second time doing this my phone seem to be rooted. Will try to flash 2.254
Sometimes it takes 2 goes to flash successfully
Sent from my C5303 using xda premium
Use vroot. 1 click and it's done.
Sent from my C5303 using Tapatalk 4
Hello Sirs,
First of all, I did search about this topic and I couldn't find the answers I'm look for. (may be my search skills are so bad). I apologize if there is already a thread related to this.
So here is my issue.
1. Updated my Xperia Z1 (India) to official 4.4.4 update via OTA. I rooted the phone using EasyRootTool_v8. Everything looked good and I used root uninstaller app to uninstall Walkman (before backing up). Now I need it back because I felt Walkman 8.4.A.1.4 works better. So I tried to get it back by downloading the same exact walkman APK and put it in system folder with full permission and restarted the phone and that got installed. But everytime I restart the phone it says "Android is upgrading". After this when I try to open walkman it says "Unfortunately walkman has stopped"
2. So I tried to install the Dual Recovery and it says success, but with read only errors. The reason why I needed recovery it to flash everything from scratch and go back to 100% official built so walkman would work.
Here are the results of EasyRootTool v8 and Dual Recovery:
----
ROOT:
-----
==============================================
= =
= Easy Root Tool v8 =
= Supports various Xperia devices =
= created by zxz0O0 =
= =
= http://forum.xda-developers.com/ =
= showthread.php?p=53448680 =
= =
= Many thanks to: =
= - [NUT] =
= - geohot =
= - MohammadAG =
= - cubeundcube =
= - DooMLoRD =
= - nhnt11 =
= - xsacha =
= =
==============================================
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
Make sure you have only one Android device connected
BlueStacks emulator can also cause problems
=============================================
Device found!
=============================================
Getting device variables
=============================================
Device model is C6902
Firmware is 14.4.A.0.108
=============================================
Sending files
=============================================
/dev/kmem exists. Using files of cubeundcube...
50 KB/s (935 bytes in 0.018s)
3490 KB/s (657704 bytes in 0.184s)
43 KB/s (757 bytes in 0.017s)
1324 KB/s (9496 bytes in 0.007s)
785 KB/s (13672 bytes in 0.017s)
=============================================
Loading geohot's towelroot (modified by zxz0O0)
=============================================
2738 KB/s (112181 bytes in 0.040s)
pkg: /data/local/tmp/tr_signed.apk
Success
=============================================
Check your device and click "make it ra1n"
Waiting for towelroot to exploit...
.
========================================================================================
IT WAS STRUCK IN WAITING FOR TOWELROOT TO EXPLOIT FOR A LONG TIME, BUT THE DEVICE SAID ITS ROOTED, SO I CLOSED THE WINDOW.
========================================================================================
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices =
= =
==============================================
[ 1. Installation on ROM rooted with SuperSU ]
[ 2. Installation on ROM rooted with SuperUser ]
[ 3. Installation on unrooted ROM using TowelRoot ]
[ 4. Exit ]
Please choose install action. [1,2,3,4]?3
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found
=============================================
Step2 : Sending the recovery files.
=============================================
mkdir failed for /data/local/tmp/recovery, File exists
7 KB/s (29 bytes in 0.003s)
3077 KB/s (15759 bytes in 0.005s)
163 KB/s (501 bytes in 0.003s)
2312 KB/s (11842 bytes in 0.005s)
3688 KB/s (56662 bytes in 0.015s)
1002 KB/s (3082 bytes in 0.003s)
125 KB/s (385 bytes in 0.003s)
4429 KB/s (657704 bytes in 0.145s)
4515 KB/s (2982577 bytes in 0.645s)
4418 KB/s (2633802 bytes in 0.582s)
4549 KB/s (1896216 bytes in 0.407s)
2256 KB/s (9243 bytes in 0.004s)
=============================================
Step3 : Setup of dual recovery.
=============================================
=============================================
Attempting to get root access for installation using TowelRoot now.
NOTE: this only works on certain ROM/Kernel versions
If it fails, please check the development thread (Post #2) on XDA for more detai
ls.
REMEMBER THIS:
XZDualRecovery does NOT install any superuser app
You can use one of the recoveries to root your device.
=============================================
=============================================
Getting ro.build.product
=============================================
Device model is C6902
=============================================
Sending files
=============================================
116 KB/s (359 bytes in 0.003s)
2318 KB/s (9496 bytes in 0.004s)
2669 KB/s (13672 bytes in 0.005s)
=============================================
Loading modified towelroot (by geohot)
=============================================
Success
4507 KB/s (106178 bytes in 0.023s)
pkg: /data/local/tmp/tr_signed.apk
Success
=============================================
Check your phone and click "make it ra1n"
Waiting for towelroot to exploit...
.
========================================================================
Please help as I'm very very new to this..
First, correct me if I'm wrong. Walkman 8.4.A.1.4 is on Android 4.4.3, isn't it?
I don't think so. But I received this update for Walkman only after updating to 4.4.4. By the way. I managed to root install the recovery successfully. Just waiting for the stock rom download to complete so I can flash it.
Sent from my C6902 using XDA Free mobile app
Ferrard said:
Hello Sirs,
First of all, I did search about this topic and I couldn't find the answers I'm look for. (may be my search skills are so bad). I apologize if there is already a thread related to this.
So here is my issue.
1. Updated my Xperia Z1 (India) to official 4.4.4 update via OTA. I rooted the phone using EasyRootTool_v8. Everything looked good and I used root uninstaller app to uninstall Walkman (before backing up). Now I need it back because I felt Walkman 8.4.A.1.4 works better. So I tried to get it back by downloading the same exact walkman APK and put it in system folder with full permission and restarted the phone and that got installed. But everytime I restart the phone it says "Android is upgrading". After this when I try to open walkman it says "Unfortunately walkman has stopped"
2. So I tried to install the Dual Recovery and it says success, but with read only errors. The reason why I needed recovery it to flash everything from scratch and go back to 100% official built so walkman would work.
Here are the results of EasyRootTool v8 and Dual Recovery:
----
ROOT:
-----
==============================================
= =
= Easy Root Tool v8 =
= Supports various Xperia devices =
= created by zxz0O0 =
= =
= http://forum.xda-developers.com/ =
= showthread.php?p=53448680 =
= =
= Many thanks to: =
= - [NUT] =
= - geohot =
= - MohammadAG =
= - cubeundcube =
= - DooMLoRD =
= - nhnt11 =
= - xsacha =
= =
==============================================
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
Make sure you have only one Android device connected
BlueStacks emulator can also cause problems
=============================================
Device found!
=============================================
Getting device variables
=============================================
Device model is C6902
Firmware is 14.4.A.0.108
=============================================
Sending files
=============================================
/dev/kmem exists. Using files of cubeundcube...
50 KB/s (935 bytes in 0.018s)
3490 KB/s (657704 bytes in 0.184s)
43 KB/s (757 bytes in 0.017s)
1324 KB/s (9496 bytes in 0.007s)
785 KB/s (13672 bytes in 0.017s)
=============================================
Loading geohot's towelroot (modified by zxz0O0)
=============================================
2738 KB/s (112181 bytes in 0.040s)
pkg: /data/local/tmp/tr_signed.apk
Success
=============================================
Check your device and click "make it ra1n"
Waiting for towelroot to exploit...
.
========================================================================================
IT WAS STRUCK IN WAITING FOR TOWELROOT TO EXPLOIT FOR A LONG TIME, BUT THE DEVICE SAID ITS ROOTED, SO I CLOSED THE WINDOW.
========================================================================================
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices =
= =
==============================================
[ 1. Installation on ROM rooted with SuperSU ]
[ 2. Installation on ROM rooted with SuperUser ]
[ 3. Installation on unrooted ROM using TowelRoot ]
[ 4. Exit ]
Please choose install action. [1,2,3,4]?3
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found
=============================================
Step2 : Sending the recovery files.
=============================================
mkdir failed for /data/local/tmp/recovery, File exists
7 KB/s (29 bytes in 0.003s)
3077 KB/s (15759 bytes in 0.005s)
163 KB/s (501 bytes in 0.003s)
2312 KB/s (11842 bytes in 0.005s)
3688 KB/s (56662 bytes in 0.015s)
1002 KB/s (3082 bytes in 0.003s)
125 KB/s (385 bytes in 0.003s)
4429 KB/s (657704 bytes in 0.145s)
4515 KB/s (2982577 bytes in 0.645s)
4418 KB/s (2633802 bytes in 0.582s)
4549 KB/s (1896216 bytes in 0.407s)
2256 KB/s (9243 bytes in 0.004s)
=============================================
Step3 : Setup of dual recovery.
=============================================
=============================================
Attempting to get root access for installation using TowelRoot now.
NOTE: this only works on certain ROM/Kernel versions
If it fails, please check the development thread (Post #2) on XDA for more detai
ls.
REMEMBER THIS:
XZDualRecovery does NOT install any superuser app
You can use one of the recoveries to root your device.
=============================================
=============================================
Getting ro.build.product
=============================================
Device model is C6902
=============================================
Sending files
=============================================
116 KB/s (359 bytes in 0.003s)
2318 KB/s (9496 bytes in 0.004s)
2669 KB/s (13672 bytes in 0.005s)
=============================================
Loading modified towelroot (by geohot)
=============================================
Success
4507 KB/s (106178 bytes in 0.023s)
pkg: /data/local/tmp/tr_signed.apk
Success
=============================================
Check your phone and click "make it ra1n"
Waiting for towelroot to exploit...
.
========================================================================
Please help as I'm very very new to this..
Click to expand...
Click to collapse
So, get a backup of your phone, and then flash it again
That's the best way
But don't get naughty for the second time to uninstall sth from root unisntaller?
Have fun!
SaeedFazlollahzadeh said:
So, get a backup of your phone, and then flash it again
That's the best way
But don't get naughty for the second time to uninstall sth from root unisntaller?
Have fun!
Click to expand...
Click to collapse
===
I used Flashtool 0.9.16.1 to flash the stock Rom. Didn't exclude anything other than system, Now the device is brand new.. Walkman still wouldn't work
WHAT AM I DOING WRONG????
:crying:
Ferrard said:
===
I used Flashtool 0.9.16.1 to flash the stock Rom. Didn't exclude anything other than system, Now the device is brand new.. Walkman still wouldn't work
WHAT AM I DOING WRONG????
:crying:
Click to expand...
Click to collapse
Did you wipe data and cache and apps log?
Try another Rom, or even downgrade it
Sent from my C6903 using Tapatalk
SaeedFazlollahzadeh said:
Did you wipe data and cache and apps log?
Try another Rom, or even downgrade it
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Tried 4.4.4 for two different sources - same issue. Yeah I wiped everything except SYSTEM because I wanted to retain the ROOT. But just WIPED everything... including system.. waiting for it to complete....
Ferrard said:
Tried 4.4.4 for two different sources - same issue. Yeah I wiped everything except SYSTEM because I wanted to retain the ROOT. But just WIPED everything... including system.. waiting for it to complete....
Click to expand...
Click to collapse
After flashing by flash tools, you'll lose your root access, I think
But you can lock your boot loader and then try again
Sent from my C6903 using Tapatalk
SaeedFazlollahzadeh said:
After flashing by flash tools, you'll lose your root access, I think
But you can lock your boot loader and then try again
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
FIXED.. FIXED... FIXED.. So it was SYSTEM that was holding something related to Walkman... :laugh::good:
Thanks SaeedFazlollahzadeh
Ferrard said:
FIXED.. FIXED... FIXED.. So it was SYSTEM that was holding something related to Walkman... :laugh::good:
Thanks SaeedFazlollahzadeh
Click to expand...
Click to collapse
You're welcome
Have fun
Sent from my C6903 using Tapatalk
Hey guys,
i have rooted many phones before, however i am having a problem with a previously rooted Sony Z1.
The previous happenings:
I rooted the device by unlocking the bootloader on the sony site. I then loaded on clockwork recovery and slapped cyanogen mod on it.
The phone was fine and working nicely, but recently stopped updating Cyanogen mod. I attempted to boot into recovery to install the latest version but all combinations of button pushing lead to nothing for a good few seconds before it starts to boot back into cyanogenmod again.
I tried using apps and various other methods to boot into fastboot, recovery and bootloader but it all goes right back into the OS.
I now have no way of updating the OS and tried using ADB to load on recovery again. ADB can see the device, and pushes successfully but when trying to boot into it, again, it does nothing but go back to the OS.
Can anyone give me a hand in popping on a recovery and somehow installing the latest Cyanogen back on? This is by far the biggest pain in the butt phone to root to begin with, but any help is much appreciated.
Tex0gen said:
Hey guys,
i have rooted many phones before, however i am having a problem with a previously rooted Sony Z1.
The previous happenings:
I rooted the device by unlocking the bootloader on the sony site. I then loaded on clockwork recovery and slapped cyanogen mod on it.
The phone was fine and working nicely, but recently stopped updating Cyanogen mod. I attempted to boot into recovery to install the latest version but all combinations of button pushing lead to nothing for a good few seconds before it starts to boot back into cyanogenmod again.
I tried using apps and various other methods to boot into fastboot, recovery and bootloader but it all goes right back into the OS.
I now have no way of updating the OS and tried using ADB to load on recovery again. ADB can see the device, and pushes successfully but when trying to boot into it, again, it does nothing but go back to the OS.
Can anyone give me a hand in popping on a recovery and somehow installing the latest Cyanogen back on? This is by far the biggest pain in the butt phone to root to begin with, but any help is much appreciated.
Click to expand...
Click to collapse
I've ran into almost exactly the same issue. Only difference is that I'm yet to install a custom ROM.
If anyone has a solution it would be greatly appreciated.
spiritonline said:
I've ran into almost exactly the same issue. Only difference is that I'm yet to install a custom ROM.
If anyone has a solution it would be greatly appreciated.
Click to expand...
Click to collapse
Just reflash dual recovery. I had the same issue before just flash dual recovery from the install batch or shell file and should work
JustPlayingHard said:
Just reflash dual recovery. I had the same issue before just flash dual recovery from the install batch or shell file and should work
Click to expand...
Click to collapse
I've tried this to no avail unfortunately.
if your cm rom 's zip got boot.img flash it
Sent from my C6903 Xperia Z1 using Tapatalk
---------- Post added at 09:02 AM ---------- Previous post was at 09:00 AM ----------
using fastboot flash it
i think the boot .img include kernel with recovery
==============================================
fastboot flash boot boot.img
Sent from my C6903 Xperia Z1 using Tapatalk
JustPlayingHard said:
Just reflash dual recovery. I had the same issue before just flash dual recovery from the install batch or shell file and should work
Click to expand...
Click to collapse
Dual recovery is for stock roms, it won't work on CM.
Sent from my C6903 using XDA Premium 4 mobile app
gregbradley said:
Dual recovery is for stock roms, it won't work on CM.
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Whoops I'm so sorry didn't read it was CM. Try flash a kernel with Recovery in it?
gregbradley said:
Dual recovery is for stock roms, it won't work on CM.
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm on the stock Vodafone rom.
I've tried running the dual recovery again it says it succeeds but I still can't boot into flash mode.
The weird thing is that I previously could.
I've also tried flashing boot.img but still no luck
Any other suggestions?
Thanks in advance!
spiritonline said:
I'm on the stock Vodafone rom.
Click to expand...
Click to collapse
have you rooted it?
I've tried running the dual recovery again it says it succeeds but I still can't boot into flash mode.
Click to expand...
Click to collapse
You do not need recovery or root to enter flashmode. Flashmode is a boot mode that completely stock phones can boot into in order to perform updates via PCCompanion
The weird thing is that I previously could.
I've also tried flashing boot.img but still no luck
Click to expand...
Click to collapse
Have you unlocked the bootloader?
Any other suggestions?
Click to expand...
Click to collapse
Yes, please post the output of the command window when you try to install dual recovery
Thanks in advance!
Click to expand...
Click to collapse
gregbradley said:
have you rooted it?You do not need recovery or root to enter flashmode. Flashmode is a boot mode that completely stock phones can boot into in order to perform updates via PCCompanionHave you unlocked the bootloader?Yes, please post the output of the command window when you try to install dual recovery
Click to expand...
Click to collapse
I'm not sure how to quote inline as you just did but:
- Yes I've rooted the phone
- You're right I'm mixing things up. I can't enter recovery I can go to flash mode. (blue led)
- No I haven't unlocked the boot loader
- Dual fails on my Mac, I will boot into my windows install and come back with the output.
Thanks for your time.
spiritonline said:
I'm not sure how to quote inline as you just did but:
- Yes I've rooted the phone
- You're right I'm mixing things up. I can't enter recovery I can go to flash mode. (blue led)
Click to expand...
Click to collapse
Wrong, Blue LED is fastboot, green LED is flashmode. This may be your issue.
- No I haven't unlocked the boot loader
Click to expand...
Click to collapse
then you wont be able to flash the boot.img
- Dual fails on my Mac, I will boot into my windows install and come back with the output.
Click to expand...
Click to collapse
It is a windows based installer, so that may help
Thanks for your time.
Click to expand...
Click to collapse
gregbradley said:
Wrong, Blue LED is fastboot, green LED is flashmode. This may be your issue.then you wont be able to flash the boot.imgIt is a windows based installer, so that may help
Click to expand...
Click to collapse
You're quick!
Here's the output:
Code:
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found!
=============================================
Getting ro.build.product
=============================================
Device model is C6903
Firmware is 14.4.A.0.133
=============================================
Step2 : Sending the recovery files.
=============================================
mkdir failed for /data/local/tmp/recovery, File exists
13 KB/s (29 bytes in 0.002s)
3710 KB/s (15757 bytes in 0.004s)
297 KB/s (501 bytes in 0.001s)
3952 KB/s (11842 bytes in 0.002s)
5157 KB/s (56834 bytes in 0.010s)
1914 KB/s (3082 bytes in 0.001s)
187 KB/s (385 bytes in 0.002s)
5708 KB/s (657704 bytes in 0.112s)
5432 KB/s (2965179 bytes in 0.533s)
5374 KB/s (2598631 bytes in 0.472s)
5795 KB/s (1875928 bytes in 0.316s)
3093 KB/s (8759 bytes in 0.002s)
=============================================
Step3 : Setup of dual recovery.
=============================================
Look at your device and grant supersu access!
Press any key to continue AFTER granting root access.
-rwxr-xr-x 1 shell shell 657704 Jul 31 17:09 /data/local/tmp/recover
y/busybox
Press any key to continue . . .
##########################################################
#
# Installing XZDR version 2.7.154 BETA
#
#####
Temporarily disabling the RIC service, remount rootfs and /system writable to al
low installation.
mount: permission denied (are you root?)
mount: permission denied (are you root?)
Copy recovery files to system.
cp: can't create '/system/bin/recovery.twrp.cpio.lzma': File exists
cp: can't create '/system/bin/recovery.cwm.cpio.lzma': File exists
cp: can't create '/system/bin/recovery.philz.cpio.lzma': File exists
chmod: /system/bin/recovery.twrp.cpio.lzma: Read-only file system
chmod: /system/bin/recovery.cwm.cpio.lzma: Read-only file system
chmod: /system/bin/recovery.philz.cpio.lzma: Read-only file system
Copy chargemon script to system.
cp: can't create '/system/bin/chargemon': File exists
chmod: /system/bin/chargemon: Read-only file system
Copy dualrecovery.sh to system.
cp: can't create '/system/bin/dualrecovery.sh': File exists
chmod: /system/bin/dualrecovery.sh: Read-only file system
Copy rickiller.sh to system.
cp: can't create '/system/bin/rickiller.sh': File exists
chmod: /system/bin/rickiller.sh: Read-only file system
Installing NDRUtils to system.
cp: can't create '/system/app/NDRUtils.apk': File exists
chmod: /system/app/NDRUtils.apk: Read-only file system
Copy disableric to system.
cp: can't create '/system/xbin/disableric': File exists
chmod: /system/xbin/disableric: Read-only file system
Copy busybox to system.
cp: can't create '/system/xbin/busybox': Read-only file system
cp: can't create '/system/.XZDualRecovery/busybox': File exists
chmod: /system/xbin/busybox: No such file or directory
Trying to find and update the gpio-keys event node.
Found and will be using /dev/input/event4!
Trying to find and update the power key event node.
Found and will be monitoring /dev/input/event3!
Speeding up backups.
Make sure firstboot goes to recovery.
=============================================
DEVICE WILL NOW TRY A DATA SAFE REBOOT!
=============================================
=============================================
Your installation has already cleaned up after
itself if you see the install.bat/install.sh exit.
=============================================
/system/bin/sh: /system/xbin/busybox: not found
=============================================
Installation finished. Enjoy the recoveries!
=============================================
Press any key to continue . . .
There is an issue with your root. Can you remount the system partition into read/write?
Please goto
sys/kernel/security/sony_ric
and look in the file that is there (If there is one). Please tell me if it says 1 or 0.
Can you let me know how you rooted?
gregbradley said:
There is an issue with your root. Can you remount the system partition into read/write?
Please goto
sys/kernel/security/sony_ric
and look in the file that is there (If there is one). Please tell me if it says 1 or 0.
Can you let me know how you rooted?
Click to expand...
Click to collapse
I'm not sure how to remount the system partition into read/write.
The folder you suggested is indeed empty.
I've rooted trough this guide: http://forum.xda-developers.com/xperia-z1/development/c6903-14-4-0-133-deodex-patch-root-t2848466
I can imagine something being wrong but it worked to some extend since I have superSU working.
Thanks again.
spiritonline said:
I'm not sure how to remount the system partition into read/write.
Click to expand...
Click to collapse
Use any root explorer and goto system and try to create a file or folder. If you are not mounted as RW it will prompt you to do so. Let me know if you can create a file or folder in the system partition
The folder you suggested is indeed empty.
I've rooted trough this guide: http://forum.xda-developers.com/xperia-z1/development/c6903-14-4-0-133-deodex-patch-root-t2848466
Click to expand...
Click to collapse
That should be ok and install dual recovery. The issue is getting the system to be RW. Try running it again and use option 3.
I can imagine something being wrong but it worked to some extend since I have superSU working.
Thanks again.
Click to expand...
Click to collapse
If it still does not work, then you can try flashing the stock 133 FTF again and going through the process of rooting again using option 3
gregbradley said:
Use any root explorer and goto system and try to create a file or folder. If you are not mounted as RW it will prompt you to do so. Let me know if you can create a file or folder in the system partition That should be ok and install dual recovery. The issue is getting the system to be RW. Try running it again and use option 3.
If it still does not work, then you can try flashing the stock 133 FTF again and going through the process of rooting again using option 3
Click to expand...
Click to collapse
Thanks for your continues support on this.
I'm unable to create a new folder in the system directory as you predicted.
I just tried to do recovery option 3 but it hangs on "libdvm opend <lol javasucks>
I've posted everything bellow. (I will now try to flash 133 again.)
Code:
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?3
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found!
=============================================
Getting ro.build.product
=============================================
Device model is C6903
Firmware is 14.4.A.0.133
=============================================
Step2 : Sending the recovery files.
=============================================
mkdir failed for /data/local/tmp/recovery, File exists
4 KB/s (29 bytes in 0.006s)
1837 KB/s (15757 bytes in 0.008s)
132 KB/s (501 bytes in 0.003s)
1667 KB/s (11842 bytes in 0.006s)
2784 KB/s (56834 bytes in 0.019s)
625 KB/s (3082 bytes in 0.004s)
123 KB/s (385 bytes in 0.003s)
2788 KB/s (657704 bytes in 0.230s)
3484 KB/s (2965179 bytes in 0.830s)
4140 KB/s (2598631 bytes in 0.612s)
3605 KB/s (1875928 bytes in 0.508s)
1487 KB/s (8759 bytes in 0.005s)
=============================================
Step3 : Setup of dual recovery.
=============================================
=============================================
Attempting to get root access for installation using TowelRoot now.
NOTE: this only works on certain ROM/Kernel versions!
If it fails, please check the development thread (Post #2) on XDA for more detai
ls.
REMEMBER THIS:
XZDualRecovery does NOT install any superuser app!!
You can use one of the recoveries to root your device.
=============================================
=============================================
Sending files
=============================================
505 KB/s (1572 bytes in 0.003s)
3929 KB/s (13592 bytes in 0.003s)
5716 KB/s (197320 bytes in 0.033s)
2356 KB/s (9496 bytes in 0.003s)
2973 KB/s (13672 bytes in 0.004s)
Copying kernel module...
3693 KB/s (34473 bytes in 0.009s)
342 KB/s (765 bytes in 0.002s)
2778 KB/s (13592 bytes in 0.004s)
Kernel version is 3.4.0-perf-gf96f13d-00901-g5169043
Version does not match 3.4.0-perf-ge4322cd, needs patching...
1+0 records in
0+1 records out
34 bytes transferred in 0.001 secs (34000 bytes/sec)
Kernel module patched.
modulecrcpatch (by zxz0O0)
module_layout: match
__aeabi_unwind_cpp_pr1: match
kallsyms_lookup_name: not found
printk: not found
mem_text_write_kernel_word: not found
__aeabi_unwind_cpp_pr0: match
successfully patched
=============================================
Installing using zxz0O0's towelzxperia
(using geohot's towelroot library)
=============================================
towelzxperia (by zxz0O0)
thanks to geohot for libexploit
creating libzxploit.so
libzxploit.so created
doing the magic
creating vm (loljavasucks)
libdvm opened (loljavasucks)
spiritonline said:
Thanks for your continues support on this.
I'm unable to create a new folder in the system directory as you predicted.
I just tried to do recovery option 3 but it hangs on "libdvm opend <lol javasucks>
I've posted everything bellow. (I will now try to flash 133 again.)
Code:
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?3
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found!
=============================================
Getting ro.build.product
=============================================
Device model is C6903
Firmware is 14.4.A.0.133
=============================================
Step2 : Sending the recovery files.
=============================================
mkdir failed for /data/local/tmp/recovery, File exists
4 KB/s (29 bytes in 0.006s)
1837 KB/s (15757 bytes in 0.008s)
132 KB/s (501 bytes in 0.003s)
1667 KB/s (11842 bytes in 0.006s)
2784 KB/s (56834 bytes in 0.019s)
625 KB/s (3082 bytes in 0.004s)
123 KB/s (385 bytes in 0.003s)
2788 KB/s (657704 bytes in 0.230s)
3484 KB/s (2965179 bytes in 0.830s)
4140 KB/s (2598631 bytes in 0.612s)
3605 KB/s (1875928 bytes in 0.508s)
1487 KB/s (8759 bytes in 0.005s)
=============================================
Step3 : Setup of dual recovery.
=============================================
=============================================
Attempting to get root access for installation using TowelRoot now.
NOTE: this only works on certain ROM/Kernel versions!
If it fails, please check the development thread (Post #2) on XDA for more detai
ls.
REMEMBER THIS:
XZDualRecovery does NOT install any superuser app!!
You can use one of the recoveries to root your device.
=============================================
=============================================
Sending files
=============================================
505 KB/s (1572 bytes in 0.003s)
3929 KB/s (13592 bytes in 0.003s)
5716 KB/s (197320 bytes in 0.033s)
2356 KB/s (9496 bytes in 0.003s)
2973 KB/s (13672 bytes in 0.004s)
Copying kernel module...
3693 KB/s (34473 bytes in 0.009s)
342 KB/s (765 bytes in 0.002s)
2778 KB/s (13592 bytes in 0.004s)
Kernel version is 3.4.0-perf-gf96f13d-00901-g5169043
Version does not match 3.4.0-perf-ge4322cd, needs patching...
1+0 records in
0+1 records out
34 bytes transferred in 0.001 secs (34000 bytes/sec)
Kernel module patched.
modulecrcpatch (by zxz0O0)
module_layout: match
__aeabi_unwind_cpp_pr1: match
kallsyms_lookup_name: not found
printk: not found
mem_text_write_kernel_word: not found
__aeabi_unwind_cpp_pr0: match
successfully patched
=============================================
Installing using zxz0O0's towelzxperia
(using geohot's towelroot library)
=============================================
towelzxperia (by zxz0O0)
thanks to geohot for libexploit
creating libzxploit.so
libzxploit.so created
doing the magic
creating vm (loljavasucks)
libdvm opened (loljavasucks)
Click to expand...
Click to collapse
Ok don't forget to flash the .108 kernel. It hangs there if you are on the .133 kernel.
gregbradley said:
Ok don't forget to flash the .108 kernel. It hangs there if you are on the .133 kernel.
Click to expand...
Click to collapse
Ok, so I flash the .108 first, then root, then flash 133?
Yes, but kernel only
Sent from my C6903 using XDA Premium 4 mobile app
gregbradley said:
Yes, but kernel only
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok, so I
1. flashed .108
2. rooted user dualrecovery
3. verified permissions by creating a new file in system and recovery was working fine.
I then tried to install darkCM per instructions but after flashing in recovery the phone wont boot.
It will just show a a blinking red LED when it's on a charger.
The only way I could find to fix it was to install stock vodafone firmware.
I retried the above twice with the same result, I hope I'm not to much a nuisance but if you could help me any further i'd appreciate it.:good:
Hi guys,
I also tested some method like a PRFCreator and after some fails and bootloops I got root on my C5503. Should work on C5502 too, but I dont have it, so you tell me if work.
DISCLAIMER: I'm not responsible for anyone bricking their phones. By using this tutorial and any of it's content you accept that you may be flashing system critical aspects of your mobile device, and things can go wrong. By using this guide you agree to put your phone at risk in the hope of fixing it, and you take full responsibility.
If You want keep data use TitaniumBackup before flashing.
If not on rooted stock rom with recovery
1) Flash old KK stock rom via FlashTool (I recommend 10.5.A.0.230 - Can be download HERE!)
2) Make sure you have enabled USB-Debugging
3) Run XZDualRecovery installer on PC (Download HERE!)
4) Choose "3" and hit enter, if is device ask for trust PC touch yes of course
If already on rooted stock rom with recovery
5) Download PRE-ROOTED rom for your xperia (C5503 or C5502)
6) Download XZDualRecovery flashable zip (HERE!)
7) Place downloaded zip's to your external SD card
8) Restart your phone and boot into recovery
9) FULL WIPE your phone (System, Cache, everything...)(don't external SD Card of course )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
10) Choose and install PRE-ROOTED rom zip
11) Choose and install ZR-lockeddualrecovery2.8.17-RELEASE.flashable.zip
12) Enjoy Rooted Android Lollipop with working DualRecovery
If bootloop:
Go to step 1 and try it again, better wipe, and really don't try install XZDualRecovery on lollipop
or
Use THIS disaster guide from @[NUT]
Credits
@zxz0O0 for PRFCreator
@IaguCool for XperiFirm
@Chainfire for SuperSU
@asakurato for inspiration in Z forum
@o-l-a-v for FTF collection
@[NUT] for XZDualRecovery
Old version (DIY):
Reacting to this thread http://forum.xda-developers.com/xperia-zr/general/ub-how-to-root-10-6-0-454-lollipop-t3114666
Inspired by this thread http://forum.xda-developers.com/xperia-z/general/stock-c6602-customized-10-6-0-454-t3114152
1-You need old stock room with working root and recovery (if u havent rooted firmware flash firmware .230, it is good for easy rooting by towelroot)
2-Download PRFCreator, XperiFirm and Flashtool
3-Download SuperSU (https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip)
4-Download firmware for your phone (using XperiFirm)
5-Create FTF using Flashtool (Tools->Bundles->Create and here move all thigs from folder list to firmware content)
6-Open PRFCreator and here put your created FTF, downloaded SuperSU.zip, check all thigs and click Create
7-After finished copy your new created zip firmware to your sd card
8-Boot into recovery on your old rooted rom (I used Philztouch)
9-Wipe all caches (I also format system partition)
10-Instal your lollipop zip rom from sdcard
11-Enjoy rooted Android 5.0.2
I dont have recovery now, I tryed include it to rom by PRFCreator and get bootloop, so react if some get working recovery.
EDIT: Do not try install or flash XZDualRecovery after upgrade to Lollipop, it made bootloop because there is some problem with SELinux
EDIT2: Added download links
EDIT3: Updated with working XZDualRecovery
Hope you understand my terrible English
Deleted
uncomment said:
You must unlock boot loader
- Download stock lollipop kernel with TWRP 2.8.6.0 made by xenius9:
Link:
http://forum.xda-developers.com/showthread.php?p=60891749
- Use PRFCreator to make only system.zip (dont tick any thing) and unclude SuperSU v2.4.6 or newer
- Flash kernel you downloaded
- boot goto recovery and wipe all (system, cache, dalvik cache, data)
- flash system zip (made by PRFCreator)
- reboot and done ( no need flash supersu again
I tested ok
Sent from my C5502 using XDA Free mobile app
Click to expand...
Click to collapse
"boot.img w TWRP 2.8.6 recovery for stock android 5.0.2 for uncloked BL"
This kernel is only for Unlocked Bootolader, but this guide is for Locked Bootloader...
WeafyrCZ said:
"boot.img w TWRP 2.8.6 recovery for stock android 5.0.2 for uncloked BL"
This kernel is only for Unlocked Bootolader, but this guide is for Locked Bootloader...
Click to expand...
Click to collapse
Oh, sorry!
Sent from my C5502 using XDA Free mobile app
Thanks dude.. Its working perfectly for me.. Very easy steps..
s
hi,thanks for good post
i am an amator
in step 4-Download firmware for your phone
where can i download fireware for root this build number xperia z c6003?
thanks
mohamad777 said:
hi,thanks for good post
i am an amator
in step 4-Download firmware for your phone
where can i download fireware for root this build number xperia z c6003?
thanks
Click to expand...
Click to collapse
Hi,
download xperifirm http://forum.xda-developers.com/crossdevice-dev/sony/pc-xperifirm-xperia-firmware-downloader-t2834142 open it and from list select your phone and model. After select your device click on "Check all". After xperifirm finish work find customization with 10.6.A.0.454 Latest Release (for example HK - Honk Kong). Under PayPal logo you will see available firmwares so click on 10.6.A.0.454 and start download.
I'm getting an error when I open super su saying that no binary is installed and that I would have to manually re root..
I used the beta super su update.zip version 2.23 Does that make a difference?
And is there any way to resolve the error?
neildalal said:
I'm getting an error when I open super su saying that no binary is installed and that I would have to manually re root..
I used the beta super su update.zip version 2.23 Does that make a difference?
And is there any way to resolve the error?
Click to expand...
Click to collapse
you should flash v2.49 which is compatible with android lollipop
download link:http://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
thanks.
I followed this post for boot into recovery:
http://forum.xda-developers.com/xperia-z/general/z-xzdualrecovery-qa-t2477769
But i got an error
the log:
Code:
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?3
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found!
=============================================
Getting ro.build.product
=============================================
Device model is C6603
Firmware is 10.6.A.0.454
=============================================
Step2 : Sending the recovery files.
=============================================
10 KB/s (31 bytes in 0.002s)
3532 KB/s (18099 bytes in 0.005s)
160 KB/s (501 bytes in 0.003s)
2911 KB/s (11961 bytes in 0.004s)
3389 KB/s (65965 bytes in 0.019s)
1001 KB/s (3082 bytes in 0.003s)
2923 KB/s (30148 bytes in 0.010s)
657 KB/s (1357 bytes in 0.002s)
3366 KB/s (34473 bytes in 0.010s)
350 KB/s (1089 bytes in 0.003s)
2653 KB/s (13592 bytes in 0.005s)
4202 KB/s (719520 bytes in 0.167s)
4204 KB/s (3413086 bytes in 0.792s)
4134 KB/s (2420533 bytes in 0.571s)
4270 KB/s (1996675 bytes in 0.456s)
2871 KB/s (11760 bytes in 0.003s)
=============================================
Step3 : Setup of dual recovery.
=============================================
=============================================
Attempting to get root access for installation using TowelRoot now.
NOTE: this only works on certain ROM/Kernel versions!
If it fails, please check the development thread (Post #2) on XDA for more det
ls.
REMEMBER THIS:
XZDualRecovery does NOT install any superuser app!!
You can use one of the recoveries to root your device.
=============================================
=============================================
Sending files
=============================================
577 KB/s (1776 bytes in 0.003s)
2221 KB/s (13592 bytes in 0.005s)
4178 KB/s (197320 bytes in 0.046s)
1864 KB/s (9496 bytes in 0.004s)
2661 KB/s (13672 bytes in 0.005s)
Copying kernel module...
1973 KB/s (34473 bytes in 0.017s)
249 KB/s (765 bytes in 0.002s)
2673 KB/s (13592 bytes in 0.004s)
Kernel version is 3.4.0-perf-g8fa3dae
Version does not match 3.4.0-perf-ge4322cd, needs patching...
dd: conv option disabled
Kernel module patched.
error: only position independent executables (PIE) are supported.
=============================================
Installing using zxz0O0's towelzxperia
(using geohot's towelroot library)
=============================================
error: only position independent executables (PIE) are supported.
=============================================
Installation finished. Enjoy the recoveries!
=============================================
Press any key to continue . . .
thankyou
Does that remove my apps and data?
mohamad777 said:
thanks.
I followed this post for boot into recovery:
http://forum.xda-developers.com/xperia-z/general/z-xzdualrecovery-qa-t2477769
But i got an error
the log:
Code:
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?3
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found!
=============================================
Getting ro.build.product
=============================================
Device model is C6603
Firmware is 10.6.A.0.454
=============================================
Step2 : Sending the recovery files.
=============================================
10 KB/s (31 bytes in 0.002s)
3532 KB/s (18099 bytes in 0.005s)
160 KB/s (501 bytes in 0.003s)
2911 KB/s (11961 bytes in 0.004s)
3389 KB/s (65965 bytes in 0.019s)
1001 KB/s (3082 bytes in 0.003s)
2923 KB/s (30148 bytes in 0.010s)
657 KB/s (1357 bytes in 0.002s)
3366 KB/s (34473 bytes in 0.010s)
350 KB/s (1089 bytes in 0.003s)
2653 KB/s (13592 bytes in 0.005s)
4202 KB/s (719520 bytes in 0.167s)
4204 KB/s (3413086 bytes in 0.792s)
4134 KB/s (2420533 bytes in 0.571s)
4270 KB/s (1996675 bytes in 0.456s)
2871 KB/s (11760 bytes in 0.003s)
=============================================
Step3 : Setup of dual recovery.
=============================================
=============================================
Attempting to get root access for installation using TowelRoot now.
NOTE: this only works on certain ROM/Kernel versions!
If it fails, please check the development thread (Post #2) on XDA for more det
ls.
REMEMBER THIS:
XZDualRecovery does NOT install any superuser app!!
You can use one of the recoveries to root your device.
=============================================
=============================================
Sending files
=============================================
577 KB/s (1776 bytes in 0.003s)
2221 KB/s (13592 bytes in 0.005s)
4178 KB/s (197320 bytes in 0.046s)
1864 KB/s (9496 bytes in 0.004s)
2661 KB/s (13672 bytes in 0.005s)
Copying kernel module...
1973 KB/s (34473 bytes in 0.017s)
249 KB/s (765 bytes in 0.002s)
2673 KB/s (13592 bytes in 0.004s)
Kernel version is 3.4.0-perf-g8fa3dae
Version does not match 3.4.0-perf-ge4322cd, needs patching...
dd: conv option disabled
Kernel module patched.
error: only position independent executables (PIE) are supported.
=============================================
Installing using zxz0O0's towelzxperia
(using geohot's towelroot library)
=============================================
error: only position independent executables (PIE) are supported.
=============================================
Installation finished. Enjoy the recoveries!
=============================================
Press any key to continue . . .
thankyou
Click to expand...
Click to collapse
You must 1st have old firmware on your smartphone (for ZR 10.5.A.0.230), then use this installer, that root your old firmware and install recovery, and from this recovery you install your created prerooted lollipop rom.
Goolileo said:
Does that remove my apps and data?
Click to expand...
Click to collapse
I think you must do wipe before installing lollipop rom, because for examle in my case, recovery from old rom doing bootloop after upgrade. That is also reason why i dont have recovery now (anyway I dont need), because after install recovery system get into bootloop.
I recommend to you use TitaniumBackup first, backup your apps, and after install lollipop restore it back.
WeafyrCZ said:
You must 1st have old firmware on your smartphone (for ZR 10.5.A.0.230), then use this installer, that root your old firmware and install recovery, and from this recovery you install your created prerooted lollipop rom.
Click to expand...
Click to collapse
thanks
I flashed 10.5.A.0.230 and now my phone does not boot!
Which recovery file did you use when you get bootloop?
soupaman said:
Which recovery file did you use when you get bootloop?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2477769 This one
To get recovery after root can't you use the lockeddualrecovery installer, connect your phone to pc and then run the. bat file? It used to work on kitkat...
I haven't tried it yet as I'm still haven't successfully rooted....
It working fine on kk, but with lollipop I am try to install it and get bootloop, now I have working lollipop with root and because I dont need recovery I dont want try install it and get bootloop again
Odesláno z mého C5503 pomocí Tapatalk
for people want to install dual recovery on lp
http://forum.xda-developers.com/showpost.php?p=59879026&postcount=3837
2.8.12 flashable
Odesláno z mého C5503 pomocí Tapatalk