Database Develop

[HELP] Unbrick RAZR i X890

Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.

Vaizen said:
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Click to expand...
Click to collapse
your secure level was to high for a non bootloader method and if you done a method with a unlocked bootloader and your bootloader was locked thats bad.
unlock your bootloader >>WARRANTY VOID<< install cwm and use any backup. or flash the 39 gb fw but i think you have yet to unlokc the bootloader to safe it.. and be patient dont try to much stuff if your battery goes low you need a factory adapter or something like this to charge ur razr i if the battery is down.
regards hope you get it waorking again

I solved my problem this way
Vaizen said:
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Click to expand...
Click to collapse
Hello good morning
I brick 2 phones trying to get one of them and in the process did fail at 2, how the recovery?
1. - Use RSD Lite version 6.1.4
2. - Use 1 extra phone (htc wildfire root and backup CWMR in case of failure)
3. - Use a GB retail rom (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml)
4. - The phone to unbrick, put fastboot mode, switching on via the power button and vol (-) until the fastboot mode screen read "fastboot reason:" if it does not, re-try until there is
5. should not say "fastboot reason: flash failure, or anything else xxxxxx xxxx xxxxx ............"
6. - Boot rsd lite 6.1.4, select retail rom, and indicate that only "unzip" connects your motorola razr I, and it connects back to the other phone (in my case htc wildfire), which has a debug mode enabled.
7. - Note, that in the window of the Rsd Lite in row 1, the Razr I phone is detected, then you start flashing in RSD Lite 6.1.4, see screenshot of your razr I to see that data is being sent, (the other phone should not be affected and only serves as a decoy to usb drivers, Rsd lite at least do not damage to my phone)
8. - Remember flashing erase the card was in your internal Razr I therefore will lose programs, photos or music you had or downloaded to the SD or internal virtual
9. - Flashing can stop and have to do everything again, but remember that no fastboot mode screen should read:
"fastboot reason: flash failure or otherwise else xxxxxx xxxxxxx ......." must be clean that is just:
"fastboot reason: "
luck : Good:
Warning, do not take responsibility for any damage to your cell involved in the process, ......... the lure of the phone can be found on youtube and just suits the way because of my need to get my phone ........ in no way am programmer or software developer, for which only comment what turned out ok to me
excuse my bad English

jacbarahona72 said:
Hello good morning
I brick 2 phones trying to get one of them and in the process did fail at 2, how the recovery?
1. - Use RSD Lite version 6.1.4
2. - Use 1 extra phone (htc wildfire root and backup CWMR in case of failure)
3. - Use a GB retail rom (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml)
4. - The phone to unbrick, put fastboot mode, switching on via the power button and vol (-) until the fastboot mode screen read "fastboot reason:" if it does not, re-try until there is
5. should not say "fastboot reason: flash failure, or anything else xxxxxx xxxx xxxxx ............"
6. - Boot rsd lite 6.1.4, select retail rom, and indicate that only "unzip" connects your motorola razr I, and it connects back to the other phone (in my case htc wildfire), which has a debug mode enabled.
7. - Note, that in the window of the Rsd Lite in row 1, the Razr I phone is detected, then you start flashing in RSD Lite 6.1.4, see screenshot of your razr I to see that data is being sent, (the other phone should not be affected and only serves as a decoy to usb drivers, Rsd lite at least do not damage to my phone)
8. - Remember flashing erase the card was in your internal Razr I therefore will lose programs, photos or music you had or downloaded to the SD or internal virtual
9. - Flashing can stop and have to do everything again, but remember that no fastboot mode screen should read:
"fastboot reason: flash failure or otherwise cuarquier xxxxxx xxxxxxx ......." must be clean that is just:
"fastboot reason: "
luck : Good:
Warning, do not take responsibility for any damage to your cell involved in the process, ......... the lure of the phone can be found on youtube and just suits the way because of my need to get my phone ........ in no way am programmer or software developer, for which only comment what turned out ok to me
excuse my bad English
Click to expand...
Click to collapse
Could PM Me with the instructions in spanish, there are some things that i do not understand in your english
Tried to use your method but RSD lite got stuck on "4/11 erase userdata" and the phone says "program dummy sp block for userdata" I don't thin I understood well the part of the second phone, does it have to be on, i mean normal on, or does it have to be in flashmode aswell?

XT1225 - comes into fastboot before connecting

Friends, I have a XT1225 with locked BOOTLOEADER and without ROOT, and I was with SOAK TEST 5.0.2 V3 installed and tried to downgrade to 4.4.4 kitkat, and used the RSD to this, gave an error cell continued functioning but every time I turn it and turn again, he first comes into fastboot, and I choose START and the phone connects normally like to know how I solve this problem without unlocking the bootloader and without ROOT?

Leandro_grilo said:
Friends, I have a XT1225 with locked BOOTLOEADER and without ROOT, and I was with SOAK TEST 5.0.2 V3 installed and tried to downgrade to 4.4.4 kitkat, and used the RSD to this, gave an error cell continued functioning but every time I turn it and turn again, he first comes into fastboot, and I choose START and the phone connects normally like to know how I solve this problem without unlocking the bootloader and without ROOT?
Click to expand...
Click to collapse
You should not take a soak test if you have locked bootloader and don't want to unlock it because you never can go back

so now I can only solve this problem if I unlock the bootloader?

Leandro_grilo said:
so now I can only solve this problem if I unlock the bootloader?
Click to expand...
Click to collapse
If you unlock the bootloader you can go back to kitkat

Leandro_grilo said:
so now I can only solve this problem if I unlock the bootloader?
Click to expand...
Click to collapse
As others have said you can only downgrade if you unlock your bootloader. So when you tried flashing the firmware it would have failed, because it failed it did not clear a flag that it set in the fastboot mode. Long story short to get your phone booting normally type the following while your phone is at the fastboot screen:
fastboot oem fb_mode_clear
It will then boot normally again.

Steve-x said:
As others have said you can only downgrade if you unlock your bootloader. So when you tried flashing the firmware it would have failed, because it failed it did not clear a flag that it set in the fastboot mode. Long story short to get your phone booting normally type the following while your phone is at the fastboot screen:
fastboot oem fb_mode_clear
It will then boot normally again.
Click to expand...
Click to collapse
thank you did as you said and I just solve the problem, it was very simple. I am very happy with your help Steve-x
but what about the User "Jaocagomez," I do not go out on the SOAK TEST?
When it launches new updates should come to me automatically? or should I do something every time?

Friends help me !!!
I deleted the cache partition and the cell has canceled .
I'm trying to recover but with RSD of the following error: "failed flashing process 3/17 partition gpt.bin phone returned FAIL . "
How do to recover my player? Perhaps it is only via ADB . Does anyone have the procedure ?

evandrovendas said:
Friends help me !!!
I deleted the cache partition and the cell has canceled .
I'm trying to recover but with RSD of the following error: "failed flashing process 3/17 partition gpt.bin phone returned FAIL . "
How do to recover my player? Perhaps it is only via ADB . Does anyone have the procedure ?
Click to expand...
Click to collapse
There is a guide here to follow. In general

P9 rescue - only fastboot (Help please)

Hi,
I have a P9 here I'm was asked to repair. I think it is kind of bricked and I hope some one can help me to unbrick it.
According to the auto dc-unlocker identification:
Found Phone : EVA-L09
Firmware : EVA-L09C432B386
FB LockState: LOCKED
USER LockState: LOCKED
So, bootloader locked and FRP locked. I don't know if the Firmware version above is right. All I know is that some Update.app files were flashed to the state of the phone now and before there where bootloops while the start animation and stuck boot with black screen.
At the moment I can do:
- turn on to see only the first huawei log with "powered by android", then nothing happens
- I can not enter eRecovery or update for Update.app
- I can only enter fastboot
I have the unlock code for the bootloader. I can not commit any fastboot commands (oem unlock, flash, etc) all is blocked with:
FAILED (remote: Command not allowed)
The locked FRP should be the reason for this.
I think OEM-unlock and usb debug from developer section was not enabled as the phone was usable. adb commands like "adb reboot bootloader" fail with
error: device '(null)' not found
fastboot devices shows the device
I have tried to uncharge the battery and then try to enter other modes than fastboot. No luck with that.
Do I have any chance to unbrick it without paying for the dc-unlocker/phoenix?
Can I do something with SRKTool?
If I have to use unlocker,
- do I have to unlock the bootloader?
- should I flash the same firmware that is now on the phone (B386) and where can I find it? (found only 1000 other versions until now)
Hope for answers

I've gone through that before, but ended up using DC-Phoenix to unbrick it when it's FRP and bootloader locked. Cost me about $15. There is a post on how to do this but I'll have to search for it again.
Here is the post I used:
https://forum.xda-developers.com/showpost.php?p=71767614&postcount=7

I guess you enter fastboot by Vol- and Power?
Not sure if the following method could help you with, but you can analyze before you go for dc-phoenix:
https://forum.xda-developers.com/showpost.php?p=74169408&postcount=7

scammander said:
Hi,
I have a P9 here I'm was asked to repair. I think it is kind of bricked and I hope some one can help me to unbrick it.
According to the auto dc-unlocker identification:
Found Phone : EVA-L09
Firmware : EVA-L09C432B386
FB LockState: LOCKED
USER LockState: LOCKED
So, bootloader locked and FRP locked. I don't know if the Firmware version above is right. All I know is that some Update.app files were flashed to the state of the phone now and before there where bootloops while the start animation and stuck boot with black screen.
At the moment I can do:
- turn on to see only the first huawei log with "powered by android", then nothing happens
- I can not enter eRecovery or update for Update.app
- I can only enter fastboot
I have the unlock code for the bootloader. I can not commit any fastboot commands (oem unlock, flash, etc) all is blocked with:
FAILED (remote: Command not allowed)
The locked FRP should be the reason for this.
I think OEM-unlock and usb debug from developer section was not enabled as the phone was usable. adb commands like "adb reboot bootloader" fail with
error: device '(null)' not found
fastboot devices shows the device
I have tried to uncharge the battery and then try to enter other modes than fastboot. No luck with that.
Do I have any chance to unbrick it without paying for the dc-unlocker/phoenix?
Can I do something with SRKTool?
If I have to use unlocker,
- do I have to unlock the bootloader?
- should I flash the same firmware that is now on the phone (B386) and where can I find it? (found only 1000 other versions until now)
Hope for answers
Click to expand...
Click to collapse
So you can not update via dload method? Did you try booting into recovery (not Recovery)? And you can't update with Update.app, you need to flash update.zip and full_update.zip via TWRP or Recovery. What wanted the owner of this phone to do, that he bricked it ?

Thank you all for your answers. Like I tried to describe: I was not able to access any other mode than fastboot.
"was able": I used DC-Phoenix now and it worked just fine.
Little confusing is that in all tutorials, even the on on the DC site, the UI of the tool is different.
But that's now Problem. The current Version is lot easier. Just "Standard Mode", select Update.app (full), Click Update.
The Phone gets flashed with fastboot, DC will restart it to update mode and will flash again. All automatic.
Really easy.

so you paid 15 USD ?

DallasCZ said:
so you paid 15 USD ?
Click to expand...
Click to collapse
Yes I did, and it worked.

my motorola device is bricked and i need help

ok... i was just browsing the web on my phone then i sat it down for a bit... then, when i came back, it was in bootloader... i tried to start it and it said "Boot Failed: Failed to initialize partition table" so, what can i do to fix it... it is a motorola g6, XT1925-6 and i tried flashing it and it still didnt work... dont have an unlocked bootloader because i cant unlock it because the device is bricked. can someone please help?

DerpyPlayz71 said:
ok... i was just browsing the web on my phone then i sat it down for a bit... then, when i came back, it was in bootloader... i tried to start it and it said "Boot Failed: Failed to initialize partition table" so, what can i do to fix it... it is a motorola g6, XT1925-6 and i tried flashing it and it still didnt work... dont have an unlocked bootloader because i cant unlock it because the device is bricked. can someone please help?
Click to expand...
Click to collapse
If you download the latest stock firmware I believe it ends with -92 you should be able to reflash the stock firmware. I would try just flashing the GPT.bin file per the restore stock instructions, and then attempt to boot. They're official files so they should flash regardless of bootloader status

[Help][James][Sprint] Need help to force EDL mode

Hi i have a model XT1921-5. It got stuck in the logo screen and couldnt boot into recovery so i tried a rescue with the RSA, it detected the phone in fastboot and found the firmware but failed flashing it. Now it only boots into fastboot.
When flashing the firmware manually only gpt.bin fails but the phone is still stuck in fastboot (failed to validate hab image - failed to validate boot image. same with recovery image). I tried everything i could but nothing worked out.
I think my only "chance" is to try a blankflash. The problem is that my bootloader is locked (never unlocked) so i cant do fastboot oem edl, i cant find anything about test points for this model.. So im looking for a way to maybe hard brick the phone to force it boot into EDL mode and try the blankflash. Unless there's a way to set the OEM unlock option via fastboot..
I appreciate any help.
Thanks in advance.

I was able to put my phone on QDL mode via test point.
Now i tried to flash the blankflash but it throws the error "XML (0 bytes) not validated"..
Does anyone knows what this error means? If is a version mismatch then i cant find a newer version of this blankflash..
Any help is always appreciated.
For anyone interested this is the test point you need to short to boot into QDL mode