nice to meet you guys,
i am new here.
it starts with,
when i want to flash new rom it works perfectly fine.
but after finishing installation of rom it asks for reboot...
after rebooting there is no coming back to nothing in screen
i have serious problem with my Xperia SP
hard brick problem
no vibrate
no light
no chargin sign
flashtool
pc companion
volum up-down with usb cable...an
with power button
nothing working...
please , help
Before My SP has-
DoomKernel V3
CWM - 6.0.3.7
TWRP- 2.0.x.x
ROM-
Existenz v 1.3.7
(camera problem that's why i was tryin to install another rom called Mahdi-v2.0)
Now charging till 3hours.....
but there is absolutly no response from my Phone........
please, somebody help me about my phone......
also i am tryin and serching in xda for something usefull and responsed with my phone.....
thank you very much,
and.
sorry for taking your valuable time
SEUS
Have you tried SEUS for repairing your software? Always works for me
won't help with SUS
Nanostray said:
Have you tried SEUS for repairing your software? Always works for me
Click to expand...
Click to collapse
tried everything include Sony Update Service (SUS)
but.... my problem is
phone get nothin (Vibrate, Light)
if i pressed Volume down with power
or volume down with USB through Flashtool
is there anything could i try??
thanks for helpin, mate!!
Do you unlock your bootloader first?
Sent from My XSP
Solution..
Happened with me when i shifted from normal rom to cm based rom
i just changed kernal by hitting fastboot mode and saved my day...
i have tried the kernal (boot.img) which was inside the 4.4 cm 11
hope u get it!!
Pulsa said:
Do you unlock your bootloader first?
Sent from My XSP
Click to expand...
Click to collapse
thank you for replying...
before bricked my phone i was using a Custom ROM (eXistenZ) with DoomKernel V.03 (cwm/twrp)
but
after bricked
with FlashTools i cant connect my device.
i pressed volume down button and plug in it to my pc USB port.....
but in BLU window's doing nothing.... also in mobile there still no vibration or LED notification at all..
can i remove the battery Cable which is connect to Motherboard?
and then try to reconnect with Flashtools for Relocking my device....
shojeep said:
thank you for replying...
before bricked my phone i was using a Custom ROM (eXistenZ) with DoomKernel V.03 (cwm/twrp)
but
after bricked
with FlashTools i cant connect my device.
i pressed volume down button and plug in it to my pc USB port.....
but in BLU window's doing nothing.... also in mobile there still no vibration or LED notification at all..
can i remove the battery Cable which is connect to Motherboard?
and then try to reconnect with Flashtools for Relocking my device....
Click to expand...
Click to collapse
Isn't Fastboot mode volume +?
sid8840 said:
Happened with me when i shifted from normal rom to cm based rom
i just changed kernal by hitting fastboot mode and saved my day...
i have tried the kernal (boot.img) which was inside the 4.4 cm 11
hope u get it!!
Click to expand...
Click to collapse
Really appriciate for your helping comments....
but.
how do i suppose to do that, where no power no led and no response from FlashTools....?
please give some instruction Step by Step
I already have CM11 (4.4) kitkat with Gapps.
but how to give the kernel for cm11 4.4?
thnks...mate
Hey, first to answer your question, the CM 11 kernel is inside the ROM .zip called "boot.img". So just to understand you, you have had eXistenZ Ultra 1.3.7 (which is in case no ROM but a kind of update) and then you Installed mahdi ROM over it, right? And now your phone is like dropped into a pool. If so the chance to reanimate your phone is unfortunately very low. I heard about a USB-JIG and J-TAG which can help but don't know if that works.
Nevertheless, I hope I could help a little bit and good luck
Sent from my C5303 using xda app-developers app
try while pressing volume up and usb connected press the powrr button for a while
Sent from my C5303 using xda app-developers app
Nanostray said:
Isn't Fastboot mode volume +?
Click to expand...
Click to collapse
yap.... i tried with all the combination..... such as
volume up + power
volume down + power
power + volume down + volume up
back cover opend....and tried
Hard Off (hole) + Power
but no response to my phone...
reallly getting very sad....s ince i bought this phone just few months ago... although in my country zone... i don't have any warrenty issue for any sony device's....
thanks mates, for giving me your valuable times...out there.
keep faith
shojeep said:
yap.... i tried with all the combination..... such as
volume up + power
volume down + power
power + volume down + volume up
back cover opend....and tried
Hard Off (hole) + Power
but no response to my phone...
reallly getting very sad....s ince i bought this phone just few months ago... although in my country zone... i don't have any warrenty issue for any sony device's....
thanks mates, for giving me your valuable times...out there.
Click to expand...
Click to collapse
I'm sorry to hear none of it works, but don't give up yet mate, I'm sure someone here on the forum can help you!
Just to last check...
Press volume up (hold)
Now put ur usb in port of sp
See is there is any blue light
sent from my galaxy grand duos
no dude it should work
dont do anything else
just relax and
open the CMD in your computer
type fast boot flashboot boot.img (kernal file inside cm 11 zip file)
cmd windows will say waiting for the phone.
now connect the usb while pressing volume down and hold the power button for two to three seconds.
ther is nothing to hard brick the device.wht ur problem is u have wrong kernal for the rom to boot.(cm11 rom and it has doom kernal, becouse boot.img file from cm11 has not push to the phone correctly when flashing the cm rom.
make sure ur battery is not empty.
Sent from my C5303 using xda app-developers app
sid8840 said:
Just to last check...
Press volume up (hold)
Now put ur usb in port of sp
See is there is any blue light
sent from my galaxy grand duos
Click to expand...
Click to collapse
after charging with wall charger now device showing the red light.......
now what to do?
Press the offbutton behind the backflip until it vibrate 3 times. Then press vol+ and put the usb cabel into phone. Now there is a blue light! You are in fastboot mode and the phone is ready to flash the bootimage. that's all you have to do! Good luck!
Janith Olagama said:
no dude it should work
dont do anything else
just relax and
open the CMD in your computer
type fast boot flashboot boot.img (kernal file inside cm 11 zip file)
cmd windows will say waiting for the phone.
now connect the usb while pressing volume down and hold the power button for two to three seconds.
ther is nothing to hard brick the device.wht ur problem is u have wrong kernal for the rom to boot.(cm11 rom and it has doom kernal, becouse boot.img file from cm11 has not push to the phone correctly when flashing the cm rom.
make sure ur battery is not empty.
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
thnks for replying
but when i open cmd and type
fastboot flash boot boot.img and press enter
<waiting for device>
then while i press volume down either up it's blinkd the red light.....repetadly...
with flashtools i got nothing also...
please, replay
If red light comes after changing... That means your phone is not bricked
sent from my galaxy grand duos
@shojeep, first, calm down! Most of Sony's devices only brick when you try to do something with TA partition...
If you tried to flash a wrong kernel it will only softbrick.
first, breathe a little, keep calm and in hope is gonna work.
Now, with all the calm of the world,try the following: hold the glory hole poweroff button for 10 seconds (located on the back cover of the phone)
next, you will connect usb cable on phone (DONT CONNECT THE OTHER SIDE ON PC, JUST USB ON PHONE)
then, you have to hold just the vol+ button by 10 seconds, and NOW you connect the usb on PC. Phone should be detected by Windows 7.
now you open flashtool, and see if the phone is being detected by FlashTool.
if yes, hold power button until phone vibrates. Now you connect the phone on the pc holding vol- button to enter on flashmode
flash this: 2.254 kernel , and later flash the full ftf 2.254 to the phone.
hope it works.
Salo-S said:
@shojeep, first, calm down! Most of Sony's devices only brick when you try to do something with TA partition...
If you tried to flash a wrong kernel it will only softbrick.
first, breathe a little, keep calm and in hope is gonna work.
Now, with all the calm of the world,try the following: hold the glory hole poweroff button for 10 seconds (located on the back cover of the phone)
next, you will connect usb cable on phone (DONT CONNECT THE OTHER SIDE ON PC, JUST USB ON PHONE)
then, you have to hold just the vol+ button by 10 seconds, and NOW you connect the usb on PC. Phone should be detected by Windows 7.
now you open flashtool, and see if the phone is being detected by FlashTool.
if yes, hold power button until phone vibrates. Now you connect the phone on the pc holding vol- button to enter on flashmode
flash this: 2.254 kernel , and later flash the full ftf 2.254 to the phone.
hope it works.
Click to expand...
Click to collapse
thank you very much for replying
but...still got the problem.....
"hold the glory hole poweroff button for 10 seconds (located on the back cover of the phone)
next, you will connect usb cable on phone (DONT CONNECT THE OTHER SIDE ON PC, JUST USB ON PHONE)
then, you have to hold just the vol+ button by 10 seconds, and NOW you connect the usb on PC. Phone should be detected by Windows 7."
there is nothing appear on my windows screen, device manager, safe remove connectivity (also i have all the drivers installed adb/google-universal/sony pcc/sony update.
everything was closed....
after that....
there is red light appera on my mobile and stand by 2mins
in this 2 mins....i opend as you say-
"and see if the phone is being detected by FlashTool."
but in my flash tool screen i got-
"25/007/2013 00:07:24 - INFO - <- This level is successfully initialized
25/007/2013 00:07:24 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
25/007/2013 00:07:28 - INFO - Device disconnected
"
(2 mins finished)
and everything off again......(still connected with USB to PC)
no light .. no vibrate.
what to do now?
please, reply.
thanks for your helping advices and comments.....
So I was trying some things and i flashed a boot.img that wasn't on my phone, it was on PC.Is it possible to have caused this problem to my phone?
My problem is that I open and just a black screen appears.. not even sony logos.I can only enter recovery mode and i cant use SUS because it says there are edited softwares on my phone.. What to do?
P.S: I can only reboot with off buton.. power button does nothing.
P.S2: I dont care if i lose all my data.. i just want it to be fixed..
billaras481 said:
So I was trying some things and i flashed a boot.img that wasn't on my phone, it was on PC.Is it possible to have caused this problem to my phone?
My problem is that I open and just a black screen appears.. not even sony logos.I can only enter recovery mode and i cant use SUS because it says there are edited softwares on my phone.. What to do?
P.S: I can only reboot with off buton.. power button does nothing.
P.S2: I dont care if i lose all my data.. i just want it to be fixed..
Click to expand...
Click to collapse
when u start hold volume - and +
try to get in recovery if not work is because u flashed a boot.img corromped
.. try to install nayak kernel
samuk190 said:
when u start hold volume - and +
try to get in recovery if not work is because u flashed a boot.img corromped
.. try to install nayak kernel
Click to expand...
Click to collapse
I can get in recovery mode as I said above.
How can i install nayak kernel or any kernel from recovery mode? Is there any guide?
PLs help me
urgent help need
I was installing cm-11-20141025-NIGHTLY-huashan on locked boot-loader using CWM recovery mode
I got the message installation successful please reboot
and after reboot the phn is not starting
help me with some solutions to recover phn back
Just like you
sanket_naik08 said:
PLs help me
urgent help need
I was installing cm-11-20141025-NIGHTLY-huashan on locked boot-loader using CWM recovery mode
I got the message installation successful please reboot
and after reboot the phn is not starting
help me with some solutions to recover phn back
Click to expand...
Click to collapse
Please, i am in the same situation, please help us
brunobaptista said:
Please, i am in the same situation, please help us
Click to expand...
Click to collapse
You made a mistake, that NIGHTLY is for unlocked bootloader only.
Download the stock firmware and check the guide on using flashtool.
brunobaptista said:
Please, i am in the same situation, please help us
Click to expand...
Click to collapse
Yep the Stock firmware helped me using the flashtool Do it would work
then flash with Weeklies CM11 which from nightlie based and for LOCKED bootloader
can anyone who has done this help me? i am in the exact situation but i'm trying to get the flashboot to work now. it recognises the device when i plug it in holding volume down and says 'device plugged in flashmode' but the phone keeps disconnecting and then reconnecting again roughly every 10-20 seconds so i can't flash anything.
is this related to battery? i tried charging it but the green light is also going on and off in the same way when plugged into a wall charger
You have to choose a .ftf file for your phone, wait for the files from the .ftf to be ready and then when flashtools prompts that you have to connect your device you do it.
kiotpoi said:
can anyone who has done this help me? i am in the exact situation but i'm trying to get the flashboot to work now. it recognises the device when i plug it in holding volume down and says 'device plugged in flashmode' but the phone keeps disconnecting and then reconnecting again roughly every 10-20 seconds so i can't flash anything.
is this related to battery? i tried charging it but the green light is also going on and off in the same way when plugged into a wall charger
Click to expand...
Click to collapse
yep first select the FTF file in the flash tool
then wait for the flashtool to prompt for connect device
then hold vol down and connect the phn and don't release the vol button till the green light goes off
then the flashing would continue
if it fails in 1st time repeat the procedure and 2nd time it would be done 100%
try it
hi
well im using Xperia V and i tried flashing it but of course im stupid and didnt "fix" the right settings...
so now it wont boot up? i can start it but it shows the sony logo then its all black and it shuts down again... i am able to go into fastboot and flash mode i think thats what its called but when i do that and use flash tool it just restarts and goes back into the black screen and shuts down
Im using linux so please dont post anything windows related? i can probably get my uncles laptop but id rather not
sorry if this is in the wrong place
please help tho?
Flash official ftf 4.3 via flashtool or cmd.
alial04 said:
Flash official ftf 4.3 via flashtool or cmd.
Click to expand...
Click to collapse
i cant do that ... whenever i plug it in and then after a little while it restarts
3r0rfadeness said:
i cant do that ... whenever i plug it in and then after a little while it restarts
Click to expand...
Click to collapse
remove the battery for 10 sec or force power off completely by holding vol up down and power button . using flashtool connect the mobile only when it say connect. i mean just select the rom and click flash without connecting the phone . then in a few sec it will ask you to connect the mobile . connect it by holding the vol down button . hope it works
I flashed boot.img for ROM Infected build of CM13 but its a tragedy.... after flashing my phone is dead I think but its not for my hope
After Flashing in Fastboot mode I unplugged and Turn on but hell it just vibrates 3 times and even I charge it 3 vibrations but If I leave it charging for a couple of minutes it will display red light but not charging until it drained my battery same as If I try to fastboot/flashboot it doesnt enter becoz if I hold up Vol.up and connect to PC it just vibrates and vibrates
Is there a Hope for my XSP to be Alive again?? I have no other phones so PLS HELP!!! I beg you!!!! Dont seen my Post PLS!!!!:crying::crying:
XperiaLuser said:
I flashed boot.img for ROM Infected build of CM13 but its a tragedy.... after flashing my phone is dead I think but its not for my hope
After Flashing in Fastboot mode I unplugged and Turn on but hell it just vibrates 3 times and even I charge it 3 vibrations but If I leave it charging for a couple of minutes it will display red light but not charging until it drained my battery same as If I try to fastboot/flashboot it doesnt enter becoz if I hold up Vol.up and connect to PC it just vibrates and vibrates
Is there a Hope for my XSP to be Alive again?? I have no other phones so PLS HELP!!! I beg you!!!! Dont seen my Post PLS!!!!:crying::crying:
Click to expand...
Click to collapse
http://talk.sonymobile.com/t5/Xperia-SP/XPERIA-SP-boot-up-problem/td-p/613503 give that a try cant hurt and if that works u should be able to get to flashmode and flash ftf file
ireaper4592 said:
http://talk.sonymobile.com/t5/Xperia-SP/XPERIA-SP-boot-up-problem/td-p/613503 give that a try cant hurt and if that works u should be able to get to flashmode and flash ftf file
Click to expand...
Click to collapse
My PC cant recognize my phone tho
XperiaLuser said:
My PC cant recognize my phone tho
Click to expand...
Click to collapse
did u try the first step though pressing the power button as the first person,sounds like phone has wrong kernel used i would say flash new kernel but u cant enter fastboot mode?
ireaper4592 said:
did u try the first step though pressing the power button as the first person,sounds like phone has wrong kernel used i would say flash new kernel but u cant enter fastboot mode?
Click to expand...
Click to collapse
My phone cant even enter Fastboot my battery is drained and when I try to conenct it to wall cahrger it doesnt charge even in Computer...
my nokia xl connect to pc (win 7 ) detect qulicomm but not disply mmc strge ..
when connect to Ubuntu phone not detect,,, plzz help sry for bad english
Try This