Hello,
I have cracked my Xperia SP digitizer and I'm currently searching for a replacement. I found many, although the thing is that there are some that have the logo costing about 20 to 30 EU and some without the logo costing under €10. Is there any difference between them? I really do not care about the logo, the only thing that concernes me is the quality, meaning sensitivity, accuracy and durability. Are the OEMs worth their money or is it the same quality on both? Can I post the links from the sites I found them, so you can check? Thanks a priori!
I changed once to nobname digitizer. After 5 minutes I bought used original one. Cheaper and much better quality. So I suggest to search for used one in good condition.
These with logo can be also not original sony digitizer.
Ive found original one in sony store (live in PL) It cost about 50eur.
did you buy the digitizer ? if yes can you please tell me where did you buy it ?
I accidently cut the digitizer's cable/link, i think i have to buy the whole thing for that
For who want to know, i ordered digitizer for 4,5$ from Aliexpress. I applied that and everything's working fine and acceptable for 4$ money. I only have some responsiveness a little [not so much] . Rarely the touch speed is slowing down for 1-2 minutes, but it comes back then. And the light sensor isn't working for me ( it's not problem for me)
I ordered a digitizer from Amazon, no issues whatsoever. But I think it was originally from China, because it was very cheap. Judging from my experience, a digitizer from eBay, Aliexpress might do the job just fine.
Thanks for replying i got an original but used digitizer in some mobile shop for about 8$ and it works pretty fine
I bought a new black digitizer, and all is working fine.
The white one's sensors wasnt worked but black's works fine.
Iekuta said:
I bought a new black digitizer, and all is working fine.
The white one's sensors wasnt worked but black's works fine.
Click to expand...
Click to collapse
What do you specifically mean??
TechnoSparks said:
What do you specifically mean??
Click to expand...
Click to collapse
I just said that my white colored digitizer's sensors were not working. But the black colored one works just fine.
Iekuta said:
I just said that my white colored digitizer's sensors were not working. But the black colored one works just fine.
Click to expand...
Click to collapse
Oh okay
Iekuta said:
I bought a new black digitizer, and all is working fine.
The white one's sensors wasnt worked but black's works fine.
Click to expand...
Click to collapse
i have a white one what should i do ?? phones screen goes off whenever i make a call
h4xw4r said:
i have a white one what should i do ?? phones screen goes off whenever i make a call
Click to expand...
Click to collapse
No fix The only solution is changing digitizer again. :crying:
Iekuta said:
No fix The only solution is changing digitizer again. :crying:
Click to expand...
Click to collapse
is it related to the holes of the sensors what is the difference between black and white ? ( already have a new black one but its doesn't work)
h4xw4r said:
is it related to the holes of the sensors what is the difference between black and white ? ( already have a new black one but its doesn't work)
Click to expand...
Click to collapse
I don't think either that it's a color-based problem. I think it's digitizers problem because some digitizers chip's are different.Maybe their sensors also different.
---------- Post added at 02:44 AM ---------- Previous post was at 02:41 AM ----------
guys could you give me a link to a digitizer you bought which works on CM13-CM14 custom roms.
I bought 2 digitizers and 2 of them are only working on Jellybean. Not working on 4.1.2 + roms ...
Iekuta said:
I don't think either that it's a color-based problem. I think it's digitizers problem because some digitizers chip's are different.Maybe their sensors also different.
---------- Post added at 02:44 AM ---------- Previous post was at 02:41 AM ----------
guys could you give me a link to a digitizer you bought which works on CM13-CM14 custom roms.
I bought 2 digitizers and 2 of them are only working on Jellybean. Not working on 4.1.2 + roms ...
Click to expand...
Click to collapse
sorry bro i got mine from a scraped phone the one i bought didnt work at all but make sure that u buy one specific for your phone model mine was c5303 and u might want to try different frimware if u bought it from china try a chinese frimware or something
Related
Hi everyone,
I replaced my LCD screen and digitizer at the weekend and am now having a few problems. The battery is draining really quickly, in about 30mins. Could this be due to a non oem screen or something? (got mine off ebay)
I am also having a few issues with the power button, there was a small amount of tape in place but im unsure if this should go below the switch or above. To prevent the circuit board switch from shorting or something?
Any help appreciated.
how much did you paid for digitizer?
well I got an LCD with digitizer attached for $43
I'm needing the same, how difficult was it to put back together,
taking it apart isnt a problem but theres that many parts I'm not sure if I could put it back together correctly
Can you tell me how many different variants of the LCD are used in the Diamond? or there is just ONE LCD w/ digitizer..? And from where can I get them for a good price?
Well to be honest, I have only had problems since I changed mine and the phone is now unusable. Its quite easy to put back together, but it seems really easy to create shorts that cause problems and I think the quality of the LCD I bought is far below that of standard and is using lots of power.
Have ordered another screen from somewhere else and will try that but think I will get a leo next week as then im due an upgrade
Would still appreciate some help with my original questions?
I bought on ebay both/LCD+touch screen/. Price is fine 36US dollars. When you buy only on of this you have problem with right connection between LCD and touch screen. Picture have little contrast but not tragically. Battery draining is same. Touch screen is more sensitive than original.
changed lcd and gps doesnt work
hello everbody..
i changed lcd my diamond and gps doesnt work. what does it mean. please help me...
naytinger said:
hello everbody..
i changed lcd my diamond and gps doesnt work. what does it mean. please help me...
Click to expand...
Click to collapse
Maybe is problem with correct connect gps antenna to connector on board.
To update this I bought a new screen with digitizer from a US company and replaced the board that connects to the microphone and now more Diamond is as good as new.
Screen is as original and excellent quality
99048907 said:
well I got an LCD with digitizer attached for $43
Click to expand...
Click to collapse
Oh that high. A friend of mine got it for $27
99048907 said:
To update this I bought a new screen with digitizer from a US company and replaced the board that connects to the microphone and now more Diamond is as good as new.
Screen is as original and excellent quality
Click to expand...
Click to collapse
Thats great, the battery drainage fixed? If all worked you should post where and for how much you bought it. So other people in need would know
99048907 said:
To update this I bought a new screen with digitizer from a US company and replaced the board that connects to the microphone and now more Diamond is as good as new.
Screen is as original and excellent quality
Click to expand...
Click to collapse
Hi,
my screen today has just started displaying loads of lines over it, i have tryed flashing but the lines stay, there is even a ghost of the Win Mobile Lock screen symbol.
Is the screen broken?
please can you post where you got your working screen from as i think i need to buy one!!
thanks
MG
MysticGenius said:
Hi,
my screen today has just started displaying loads of lines over it, i have tryed flashing but the lines stay, there is even a ghost of the Win Mobile Lock screen symbol.
Is the screen broken?
please can you post where you got your working screen from as i think i need to buy one!!
thanks
MG
Click to expand...
Click to collapse
Was your screen original from HTC or you have replaced it before??
samy.3660 said:
Was your screen original from HTC or you have replaced it before??
Click to expand...
Click to collapse
Hi,
screen is original.
what happened was, i enabled win mobile autolock, and then i kinda had a fit. It was turning the screen on and off for about 1 second each time, i thought it would stop so i waited about 40 seconds, then hit the reset button.
when the phone reset it still had an "imprint" of the windows mobile lock screen on the screen, as if it had "burnt" all the white areas onto the screen.
I tryed to screenshot it, but it didnt show in a screenshot so i presumed the screen was wrecked.
I have left my phone without battery overnight and it SEEMS to have sorted itself out, but im not sure!
Thanks in advance
MG
p.brazauskas said:
Thats great, the battery drainage fixed? If all worked you should post where and for how much you bought it. So other people in need would know
Click to expand...
Click to collapse
Thought this was fixed but the battery drainage is still huge. The phone is now constantly hot, so have stopped using it. I have dismantled the phone countless times now as I thought there may be a short circuit but with no fix.
When I posted originally the battery was on 85% after 4 hours but then the next time I turned the screen on it was on 1%.
Its annoying as I loved my Diamond but now I just feel angry when I see it on my desk. Using an old moto flip phone at the moment which I hate, untill some shops get the leo back in stock. Tempted by the n900 also, any thoughts?
Hi,
I will change my Diamond's screen. Did you buy it online? If so, would you please send a link of the LCD w/ Digitizer that you bought. Thanks in advance
hi my friends!
i found a mainboard replacement for my GT-N7000...
my phone is white, the replacement phone is black.
i can use everything from the black one, both are 16Gb edition, both GT-N7000 model...
my question is: is there any chance that the mainboard from the replacement phone not to work into my own?
help me!
If your pretty much sure 100% that the replacement phone (which is black) is for the international unlock N7000 one.. then I'm pretty much sure also that the motherboard of that will and is 100% compatible with your white Gnote.
Aesthetically. the only diff between your white one and the replacement one is the colors of their casing... but other than that... I'm sure internally all are one and the same
the replacemetnt phone which is black has the screen broken, but if you call it it rings, but no can answer or anything, as the screen is broken.
is a GT-N7000 unlocked phone... my fear is that chance of incompatibility of that mainboard on my phone (which all is good except the mainboard...)
if the only problem on the black replacement one is the broken screen itself... then I'd say the motherboard of that is really compatible with your white Note.
By the way, where are you buying the replacement? if it's on Ebay,just a word of caution... don't rely too much on what the seller has to say... who knows.. some says that it's only the screen itself that is broken... but when you finally receive that unit... there might be something more to it that is broken.. you'll never know...
just a piece of advice....
no, not ebay...
just a guy has it and i found it on one of locally forums.
i see it and tested personally the black Note (replacement) and beside the broken screen, i was able to call the phone and it rings, vibrates, but i can't do nothing because of the broken screen.
christty31 said:
no, not ebay...
just a guy has it and i found it on one of locally forums.
i see it and tested personally the black Note (replacement) and beside the broken screen, i was able to call the phone and it rings, vibrates, but i can't do nothing because of the broken screen.
Click to expand...
Click to collapse
then u should change the screen. otherwise with "cannot do anything" on your notes is equal to not owning notes.
no, you did not read the whole topic....
christty31 said:
no, not ebay...
just a guy has it and i found it on one of locally forums.
i see it and tested personally the black Note (replacement) and beside the broken screen, i was able to call the phone and it rings, vibrates, but i can't do nothing because of the broken screen.
Click to expand...
Click to collapse
then, if you trust your instincts then go for it.. Again let me reassure you... there's no difference between the white and the black N7000s... only the color of their casings.. other than that.. internally, they're all the same.
thank you, i really hope you are right...
maybe i will have my Note back...
christty31 said:
hi my friends!
i found a mainboard replacement for my GT-N7000...
my phone is white, the replacement phone is black.
i can use everything from the black one, both are 16Gb edition, both GT-N7000 model...
my question is: is there any chance that the mainboard from the replacement phone not to work into my own?
help me!
Click to expand...
Click to collapse
Can u find new replacement part ? Im from Malaysia and my note just dead. I think it has related to SOD..
Hi,
I bought a new housing for my N7100.
After changing the housing I am losing Wi-Fi and Bluetooth.
It just gets turned off automatically within 1 second.
When I whack it hard couple of times it works for 2-4hours.
I even got replacement housing from seller but the problem persist.
Any suggestions?
A hardware experts help is appreciated.
No compatible nfc on the back cover?
Sent from DJ-P68 on 3+ PA
Declan79 said:
No compatible nfc on the back cover?
Sent from DJ-P68 on 3+ PA
Click to expand...
Click to collapse
Using original back cover.
Tried new one also.
Doesn't seem to work both.
SandeepEmekar said:
Hi,
I bought a new housing for my N7100.
After changing the housing I am losing Wi-Fi and Bluetooth.
It just gets turned off automatically within 1 second.
When I whack it hard couple of times it works for 2-4hours.
I even got replacement housing from seller but the problem persist.
Any suggestions?
A hardware experts help is appreciated.
Click to expand...
Click to collapse
Ar you sure you have the n7100 model housing and not the other models.
kms108 said:
Ar you sure you have the n7100 model housing and not the other models.
Click to expand...
Click to collapse
Don't you have any other things to do in life than messing with people?
SandeepEmekar said:
Don't you have any other things to do in life than messing with people?
Click to expand...
Click to collapse
I'm only here for suggestion, not sure what you are getting at, i'm say are you sure you have the n7100 and not the n7105 or other models, there are slight differences between them all.
I know ur problem, take off the back cover and remove the screw next to the wifi antennae which is the one left to the camera, (not on the side where the flash is at).
it should work. If it doesnt press on that area kinda hard n it shud work. i do this and lik once a month or twice maybe the same thing happens. It is a bad connection with the wifi antenna i believe. When it stops working i simply take off the back cover and just push on it. Usually it happens when my phone gets real hot.
---------- Post added at 03:32 AM ---------- Previous post was at 03:31 AM ----------
also sorry for late reply, i was just lookin around forums n found ur thread
Dear All.
I want to buy Digitizer Replacement for my Atrix HD on Ebay.
But, I doubt which one will be working well.
Does anyone have clue or something about how to choose the Digitizer?
My friends said that the good one will have ATMEL on the chip.
But, I couldn't find the one who got ATMEL Chip on the Digitizer.
Fine the one that matches the part number on your current LCD/digitizer.
Dr. Orange said:
Fine the one that matches the part number on your current LCD/digitizer.
Click to expand...
Click to collapse
Do you have any experience to find the replacement digitizer based on Serial Number??
I think only Motorola who knows about the Serial Number and I don't think on ebay will be easy to find it.
i have whole wifi not working atrix hd phone
blloewy said:
Dear All.
I want to buy Digitizer Replacement for my Atrix HD on Ebay.
But, I doubt which one will be working well.
Does anyone have clue or something about how to choose the Digitizer?
My friends said that the good one will have ATMEL on the chip.
But, I couldn't find the one who got ATMEL Chip on the Digitizer.
Click to expand...
Click to collapse
:victory::angel:will gladly give you whole phone if its not fixable
brazen0ne said:
:victory::angel:will gladly give you whole phone if its not fixable
Click to expand...
Click to collapse
Do you mind send your phone to me??
I will use it as canibal to my phone :hammers
I bought this one about a month ago. It's been working fine so far.
http://www.ebay.com/itm/Black-Touch.../390711325406?ssPageName=ADME:L:eek:C:US:3160
helloha1 said:
I bought this one about a month ago. It's been working fine so far.
http://www.ebay.com/itm/Black-Touch.../390711325406?ssPageName=ADME:L:eek:C:US:3160
Click to expand...
Click to collapse
Unfortunately it doesn't ship to my country :crying:
Is that any code on the digitizer such as Serial Number or CHIP Manufacturer such as ATMEL?
Anyone know the digitizer is seperate from the LCD?
clockcycle said:
Anyone know the digitizer is seperate from the LCD?
Click to expand...
Click to collapse
Yep, it is. I followed this guide to replace my digitizer: http://www.youtube.com/watch?v=s4zbk4QHA6o
---------- Post added at 05:12 PM ---------- Previous post was at 05:11 PM ----------
blloewy said:
Unfortunately it doesn't ship to my country :crying:
Is that any code on the digitizer such as Serial Number or CHIP Manufacturer such as ATMEL?
Click to expand...
Click to collapse
Nope, no markings IIRC. I'd just say to get any digitizer that says compatible with Atrix HD MB886 and you'll be fine.
My display is broken.touch screen is working.where can i buy a original one?
I am from India.
authorised service centre
Visit nearest service center and display price is 6000/-
Anyone knows where i can get one from germany?
try here
Same thing happened to my device . I enquired in the nearest mi show room , they said it will cost around 6500/- rupees
DomagojX said:
try here
Click to expand...
Click to collapse
Fake like every other...
I got this yesterday. The color for light sensor is different and the ear speaker too.
Thats my third "original" display and everyone cracks faster than real original one.
Is there no possibility to get a real original display in europe? I tried to ask the xiaomi store in Austria but they told me that they only selling xiaomi products and haven't a service point.
HelmutK. said:
Fake like every other...
I got this yesterday. The color for light sensor is different and the ear speaker too.
Thats my third "original" display and everyone cracks faster than real original one.
Is there no possibility to get a real original display in europe? I tried to ask the xiaomi store in Austria but they told me that they only selling xiaomi products and haven't a service point.
Click to expand...
Click to collapse
But these have no touch issues right? I dont care about the light sensors tbh what do you mean with the ear speaker?
jody2k said:
But these have no touch issues right? I dont care about the light sensors tbh what do you mean with the ear speaker?
Click to expand...
Click to collapse
The cover of the ear speakers is different. The original is plain to the display the others got a pit.
DomagojX said:
try here
Click to expand...
Click to collapse
HelmutK. said:
Fake like every other...
I got this yesterday. The color for light sensor is different and the ear speaker too.
Thats my third "original" display and everyone cracks faster than real original one.
Click to expand...
Click to collapse
On the link there are two options. One is with frame and other is without frame. So which frame is this referring to? My phones front glass is broken. Which one should I order, if I decide to get it from Ali Express?
So... after the chat support can't help.. I was two months ago in Paris. The Xiaomi Center in Les Halles couldn't help. They just sell the products.
The fake display from DomagojX's link which I bought in July got now some dead pixels...
I'm still searching for a real original display...
Any UK places?
I noticed my FTS_TS has a yellow/orange sort of colour around the area of the side buttons when it's a white screen also have issues with screen freezing when trying to install/use TWRP
I've heard Dragon TT has original parts, but I've never had to buy something directly from them.
Here's the link, if someone wants to give it a try.
https://www.dragon-tt.com/xx.aspx?id=585#
Buy it from Amazon i did it too
Has anyone tried the replacebase one?
I Purchased from Aliexpress , Whether i compare with another poco f1 phone , Same Color Matrix , Same Multi touch , Same Brightness is there .
Here is link , i think this will help for you
aliexpress.com/item/32927719753.html?spm=a2g0o.productlist.0.0.29c83162xtWjkV&algo_pvid=4f8ebcd2-bb90-46dc-a6c4-693748b3f6d1&algo_expid=4f8ebcd2-bb90-46dc-a6c4-693748b3f6d1-15&btsid=89226fe1-f178-41b2-b7f5-442def8ef98b&ws_ab_test=searchweb0_0,searchweb201602_7,searchweb201603_53
also buy OEM with frame . i ordered and replaced the display . it is working fine .
rajaganesan7 said:
I Purchased from Aliexpress , Whether i compare with another poco f1 phone , Same Color Matrix , Same Multi touch , Same Brightness is there .
Here is link , i think this will help for you
aliexpress.com/item/32927719753.html?spm=a2g0o.productlist.0.0.29c83162xtWjkV&algo_pvid=4f8ebcd2-bb90-46dc-a6c4-693748b3f6d1&algo_expid=4f8ebcd2-bb90-46dc-a6c4-693748b3f6d1-15&btsid=89226fe1-f178-41b2-b7f5-442def8ef98b&ws_ab_test=searchweb0_0,searchweb201602_7,searchweb201603_53
also buy OEM with frame . i ordered and replaced the display . it is working fine .
Click to expand...
Click to collapse
Is it a Tianma/nvt?
I ordered from the link above because the sellet told me that this was NVT, it turned out being EBBG/FTS with ghost touches and bad colours.
https://it.aliexpress.com/item/4001242645094.html?spm=a2g0s.9042311.0.0.27424c4dMxNHKP