I am very happy to present first dualboot project for gt i9192. This original patcher is made by chenxiaolong and you can find original thread on gt i9505 original android development section. I only made some changes to original patcher. Big thanks to chenxiaolong for his awesome work.
I will not be responsible for your device to be bricked. Please proceed on your own risk.
Note : If you want to dualboot Touchwiz ROM with custom ROM please keep TW ROM as primary one. Also you have to debloat it to make space in /system partition for secondary rom. You can check the size of/system partition by diskinfo pro app attached in zip file.
Procedure : 1) First of all download the zip file attached below.
2) Boot in to primary ROM and install dualboot patcher app.
3) Open the app and set kernel as primary kernel.
4) Now patch the secondary ROM using dualboot patcher software on PC. ( do not patch using dualboot patcher app installed in primary ROM).
5) Reboot into recovery.
6) Flash the patched zip file for secondary ROM ( don't wipe anything just flash zip file).
7) Reboot.
8) You will boot in secondary ROM. Now install dualboot patcher app in secondary ROM.
9) Set current kernel for secondary ROM.
That's it. Now you can boot in either ROM by switching the ROM using dualboot patcher app and reboot.
The zip files to be flash for primary ROM need not to be patched but that for secondary ROM must be patch before flashing. To wipe data, cache, dalvik cache don't wipe through recovery directly. Flash the dualboot utilities zip file attached below in recovery. You will get to menu that let's you wipe the respective partition of either ROM. The normal nandroid backup will backup both primary and secondary ROM. To backup individual ROMs please see original thread by chenxiaolong.
Unfortunately android 5.0 ROMs are not supported by this patcher app.
For i9190/9195 users please install diskinfo pro app and check partition numbers if they are as below then you can directly use the patcher app and software.
system= mmcblk0p21
cache= mmcblk0p22
data= mmcblk0p24
If these are different then just change respective number using notepad++ as per your device partitions and you can use the patcher. You can also patch files manually for secondary ROM but autopatcher is much easy. The method is given in original thread by chenxiaolong.
So enjoy dualbooting and give me thanks if you like my work.
Download link :- http://d-h.st/F1qw
Thank you.
Can we install different based rom?
1. Cm rom
2. Tw rom
Otherwise it must be same based rom
Both Tw roms or both cm roms etc.
Was longing for this since long. Thanks. Well try this in off time
vuralemre said:
Thank you.
Can we install different based rom?
1. Cm rom
2. Tw rom
Otherwise it must be same based rom
Both Tw roms or both cm roms etc.
Click to expand...
Click to collapse
You must install TW as primary and CM ROM as secondary ROM.
Sanesh Munde said:
You must install TW as primary and CM ROM as secondary ROM.
Click to expand...
Click to collapse
Well done sanesh, will use and let you know the report,kindly try to add support for 'lollipop' also in coming days.
I confirm that it's working.
Details later
Edit : Details :
1)Primary: Samsung modded v2.5 by adityapal & others. Deleted many system apps and free space increased to 403 mb.
2)Installed DualBootPatcher and set kernel as primary.
3)Flashed CM11 by k2wl after patching it in PC. Device booted and found 23mb space left still now.
4)Installed DualBootPatcher and set CM11 kernel as secondary.
5)Can boot to any ROM from dualbootpatcher app.
6)Need to free some more space to flash Gapps CM11 after patching.
7)Made a Nandroid backup. A pretty large file.
8)Need to flash Dualbootutilities now.
Problems:
Cant patch chainfire supersu for upadting second ROM. The PC patcher goes into error.
Thanks to Sanesh to give us another thing to play with. Waiting for its update to become compatible with CM12 now.
A debloated flashable default Samsung ROM which will leave minimum 500mb system space free is welcome.
parthabhatta said:
I confirm that it's working.
Details later
Edit : Details :
1)Primary: Samsung modded v2.5 by adityapal & others. Deleted many system apps and free space increased to 403 mb.
2)Installed DualBootPatcher and set kernel as primary.
3)Flashed CM11 by k2wl after patching it in PC. Device booted and found 23mb space left still now.
4)Installed DualBootPatcher and set CM11 kernel as secondary.
5)Can boot to any ROM from dualbootpatcher app.
6)Need to free some more space to flash Gapps CM11 after patching.
7)Made a Nandroid backup. A pretty large file.
8)Need to flash Dualbootutilities now.
Problems:
Cant patch chainfire supersu for upadting second ROM. The PC patcher goes into error.
Thanks to Sanesh to give us another thing to play with. Waiting for its update to become compatible with CM12 now.
A debloated flashable default Samsung ROM which will leave minimum 500mb system space free is welcome.
Click to expand...
Click to collapse
The basic idea of patcher is to patch META-INF/com/google/android/updater-script file. The updater-script file in supersu zip and some gapps packages is dummy file, so it cannot be patched by this patcher. I have tested it with different custom ROMs but only in Mokee AOSP ROM gapps package is installed. If you want supersu app in secondary ROM just download its latest apk file and install it then update its su-binary when prompted.
@sanesh
Just did that what you said in your last sentence. It was the only way left. Successfully patched and flashed gapps too. Everything running well till now
Hi thanks for this work.... But have a doubt....
Should I have to keep a large internal memory or should I have to keep
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
large system ROM level..... Attached a screenshot too.... Hope u ll understand d question.....
The reason I am asking is. When I try to flash the secondary it says installation aborted.... Status 7 error.....
Sent 4m My S4 Mini With Stock 4.4.2
singh54 said:
Hi thanks for this work.... But have a doubt....
Should I have to keep a large internal memory or should I have to keep
large system ROM level..... Attached a screenshot too.... Hope u ll understand d question.....
The reason I am asking is. When I try to flash the secondary it says installation aborted.... Status 7 error.....
Sent 4m My S4 Mini With Stock 4.4.2
Click to expand...
Click to collapse
Check all boxes in setting of diskinfo app. You will see system partition with number mmcblk0p21. You must clean some space in this partition by debloating present rom. To know how much memory you have to clean, simply extract secondary ROM zip file in PC. The amount of space acquired by extracted rom, you have to clean in system partition.
Sorry for my bad English.
Have a Doubt.........
Hi,
You said, that if i want to install a custom rom over TW ROM then i have to keep the TW ROM as primary...
But my doubt is, i am already in a cm 11 based ROM, should i install another CM 11 ROM or CM 10.2 ROM over the first one by keeping the first cm 11 as primary and the another one as secondary...
Should i do the above, does it cause any problems..????
Will it works???????!!!!!!!!!!!??????????????
Please tell me buddy...............................
I think it won't create any problem. Only the secondary ROM and gapps need to be properly psyche patched. @sanesh
Is the dual boot patcher (android and PC) updated for cm12?
Hei friend can u link me for 9195 project
Thanks
Hello friends, nice to meet you once again.
Xda senior member Chenxiaolong has made nice app Dualboot Patcher that makes our device dualboot or multiboot for lollipop based roms.
You can view the original thread here, http://forum.xda-developers.com/showthread.php?t=2447534
Only remember to install TouchWiz rom as primary rom.
Procedure :
Download latest version of the app from here, https://snapshots.noobdev.io/
Install the app in primary rom and open it.
Go to Roms and set the kernel.
Now patch your favorite custom rom( you may patch it as secondary or for data slot).
Flash the patched zip through recovery( or you may install it from the app inbuilt function).
Reboot your phone, install Dualboot Patcher app in secondary rom and set the kernel.
You may install multiple roms in data slot. Also download dualboot utilities zip from above link and keep its copy in sdcard ready to use.
For I9190 and I9195 users simply unzip the rom before patching, go to build.prop in system folder and change
ro.product.device=serranods
Then zip the rom, patch it and then flash.
So friends enjoy multiboot and hit thanks if you like this post ☺☺?.
Nice! Will definitely give this a try on my I9195 LTE.
RuffBuster said:
Nice! Will definitely give this a try on my I9195 LTE.
Click to expand...
Click to collapse
I have this working great on my i9195 LTE running debloated scStock and latest build of CM11 with the latest security fixes using small gapps package.
Had to alter the line "ro.product.device=serranolte" to "serranods" in build prop for primary ROM to set the kernel. And also the patched secondary ROM had to be flashed with the dual boot app otherwise from recovery you have to edit the ROM mod script to ignore phone version as it was originally compiled for the i9192.
But working great here using slimmed down ROMs. Now I have the best of both worlds, having stock features and app compatibility, while being able to use other ROM as my daily driver. And with one click of a shortcut and a reboot I'm able to switch very quickly. This is probably the best dual boot mod I've tried with a wide range of compatibility.
Having one issue though I'm unable to flash F4K's kit kat kernel patched or by including it within the ROM itself. Both methods normally work with this kernel under a normal single ROM installation. Apart from this is good stuff.
Sanesh Munde said:
Now patch your favorite custom rom( you may patch it as secondary or for data slot).
Click to expand...
Click to collapse
can we use external_sd?
I got error "there is not enough space to create external_sd/multiboot system.img
Hello, how to install rom on ext sd? I have s4 mini and every time I get error not enough space fro creating system.img / I have philz touch recovery and ext sd slot patched aicp rom on sd card and have installed blisspop as primary
Sanesh Munde said:
Hello friends, nice to meet you once again.
Xda senior member Chenxiaolong has made nice app Dualboot Patcher that makes our device dualboot or multiboot for lollipop based roms.
You can view the original thread here, http://forum.xda-developers.com/showthread.php?t=2447534
Click to expand...
Click to collapse
Hi Buddy,
Thanks for this. I just downloaded the latest version and followed all your steps.
Everything is working fine...
singh54 said:
Hi Buddy,
Thanks for this. I just downloaded the latest version and followed all your steps.
Everything is working fine...
Click to expand...
Click to collapse
I ever use this app and duallboot utilities and not worked on lp roms [emoji19]
Enviado desde mi GT-I9195 mediante Tapatalk
Related
Hi guys,
Just want to inform that I will not continue to support this tool anymore since I just bought a new phone due to the requirement of my work.
Thank you all for using and supporting me in making this app.
Devilsking
(9th Feb 2015)
-----------------------------------------------------
WARNING: BESURE YOU ARE UNLOCKED BOOTLOADER BEFORE FLASHING/DOWNGRADING FIRMWARE!
It's nearly 11 months since the last update v1.2. Now I will introduce the new version of Myth Tools with a big improvement.
Thanks to all your comments which helps me to complete the features of Myth Tools. All feedbacks are always welcome.
Please read instruction carefully before using. Thank you.
BR,
DK
----------------------------------------------------------
If you stucks after flashing back to stock rom from custom rom, maybe this method should help you to fix it:
Credit for skeevydude
The fix is simple. Boot into Philz, format the internal sd, set the internal sd mount point to /data/media, reboot, format it again, and done. I'm assuming you don't keep anything important on the internal sd...
The issue is multiuser support in 4.2+ roms screws with our 4.1 stock roms. 4.2+ uses /data/media/0 for the main user's "internal sd" then /data/media/1 then /data/media/2 and so on and so forth for each additional user. You don't have to format, but if you were on Carbon, only changed the mount point, flashed to stock, then later down the line you install CM or Slim, your crap from Carbon will still be there under /data/media/0 and could cause issues with the newer rom.
EDIT:
A format of /data might fix this too, but you'll still have to check and/or change the mount point. The internal sd is stored on /data.
Click to expand...
Click to collapse
-----------------------------------------------------------
This tool is created by The Myth Team for Motorola Atrix HD
All comments to help improving tools are always welcome!
-----------------------------------------------------------
MAIN PARTS:
1. Installer ADB/FASTBOOT/APKTOOL for AHD (Use for parts below and further modding)
2. Flashing Tools for stock firmwares (compatible with ICS/JB of AT&T, BELL and Mexico AHD;
include options for installing CWM recovery, no needs to care about editing xml any more, just put firmware into our tools and it will do for you)
3. Flashing Recovery
4. Rooting Tools (Motochopper - By Dan Rosenberg; it's combined here to bring the convinience for users after
installing stock firmwares)
5. Unlocking Bootloader Tools (Motopocalypse - By Dan Rosenberg; it's combined here with the same target as
rooting tools but it's necesary for users who want to flash other carrier's firmwares on their AHD)
6. Dowload Motorola USB Driver (Lastest driver)
7. Lockscreen Mod
8. Mod for ADBD Insecure
EXTRA PARTS:
4 Quick reboot Options
------------------------------------------------------------
HOW TO USE:
1. For the installer, just select option and it will open a new window, select Install button and it will install adb/fastboot/apktool to your windows. If your windows dont allow to install (due to UAC control), u can select installer in /tools folder and run it under administration mode. With this installer, u dont need sdk-platform anymore to use adb or fastboot. Just need to have JDK and it will run normally.
2. To flash stock firmware, you only have to download stock firmware (*.zip file) and put it in 'firmware' folder then run our tools. Follow its instructions and options to finish the flash process. Dont need to edit xml files and No more worries about failure with RSDLite. We have tested all firmwares of AHD (ICS 4.0.4, JB 4.1.1, 4.1.2 of Bell, AT&T, Mexico Retail) with our tools and they worked.
3. Option allows users to install cwm recovery or custom recovery (it's up to users). To flash custom recovery, you can place recovery image (*.img) to 'recovery folder and run the tools.
4,5. This is popular and famous tools by Dan Rosenberg. I think I dont need to explain again
6. This is link for Driver on Motorola site. Just in case you miss it or need to install again.
7. It provides a various theme for lockscreen of stock firmware by modding framework
8. It will mod automatically the boot.img to allow the true adb root with adb command (eg. "adb remount" to full read-write system..). It mainly is useful for stock firmware while custom rom always has.
------------------------------------------------------------
DOWNLOAD
- V1.3: OneDrive (Updated link 17th June 2018)
- V1.2: Dev-host or Google driver
- V1.1: Dev-host or Google Driver
- V1.0: Dev-host or google driver (select File > Dowload)
If you satisfy with our tool, plz consider to invite me a cup of coffee
------------------------------------------------------------
Credit:
- The Myth Team's members
- Thank to Djrbliss, skeevydude, leanix, osm0sis, chainfaire, PhilZ: I used some things from your files/information to make this tools
If I miss sb, feel free to tell me
------------------------------------------------------------
SCREENSHOTS & CHANGE LOG:
V1.3
- Optimize tools' code
- Improve apktool/adb/fastboot installer
- Improve recovery flashing & add Philz Touch to option.
- Added reboot option after flashing
- Show progress of flashing firmware
- Add feature to auto-enable ADBD Insecure (Auto mode for ATT 4.1.1 & BELL 4.1.2, Manually mod option)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
V1.2
- Add lockscreen effect mod tool (Screenshot of its result: see here)
+ 3 preload mods: original, samsung ripple and honeycomb effect
+ allows users to mod it themselves: custom option.
V1.1
- Add Launcher
- Add Users' agreement
- Add Flash Recovery Option which allows users to flash cwm recovery or custom recovery
by putting recovery image in tools (stock recovery,...etc) then it will be flashed to phone.
- Add Quick Reboot Options
- Optimize tools' sources
V1.0
- First release
- Tested flashing all firmwares of AHD
Very nice, I was hoping someone would create a nice tool like this.
Sent from my MB886 using xda app-developers app
------------------------------------------------------------
Change log:
1.0
- First release
- Tested flashing all firmwares of AHD
Great job but will downgrade to stock ICS work with this? Curious
thank you so much...
big help if somebody will link a couple of working ics and jb rom zip format....
pleaaaaaseeeeeee....
NYSEAN1 said:
Great job but will downgrade to stock ICS work with this? Curious
Click to expand...
Click to collapse
Yes. Tested. U only need unlocked bootloader first.
Sent from my MB886 using xda app-developers app
is this for windows only?
HELP!
MY PHONE is now stocked at warning boot loader unlcked.
it does not boot anymore after trying to go back to ICS with this utility...
any advise?????
thanx
htchd2fix said:
HELP!
MY PHONE is now stocked at warning boot loader unlcked.
it does not boot anymore after trying to go back to ICS with this utility...
any advise?????
thanx
Click to expand...
Click to collapse
Which ICS did u flash? Bell or ATT? Do u notice any error during flash process ?, if yes, plz post screenshot here or type it here.
You can try to go back to JB while I figure out what happened to you. Plz provide information asap then I can help u.
Edit 1: I have tried to flash Bell ICS and it booted normally. Now I will try ATT ICS again =.='
Here is screenshot of my phone on Bell ICS
Edit 2: Flashed ATT ICS again and it also booted. I think you should try to flash firmware again or download firmware again then flash. If you still meet problem after trying again, plz let me know. I'm happy to help you
Here is screenshot of my phone on ATT ICS:
Which version of cwm does it flash?
Sent from my MB886 using xda premium
bankanidhi said:
Which version of cwm does it flash?
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
v6.0.2.8
Swiftb12305 said:
is this for windows only?
Click to expand...
Click to collapse
Yep. Window Only. I dont use Linux or Mac =.='
devilsking said:
v6.0.2.8
Click to expand...
Click to collapse
Thanks. I also wanted to know if it is the official recovery. Please let me know who compiled the save. Thanks. This device is getting better and better. Thanks a ton fur this tool.
Sent from my MB886 using xda premium
bankanidhi said:
Thanks. I also wanted to know if it is the official recovery. Please let me know who compiled the save. Thanks. This device is getting better and better. Thanks a ton fur this tool.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
I got it from skeevydude's topic. So maybe it's not official one
devilsking said:
I got it from skeevydude's topic. So maybe it's not official one
Click to expand...
Click to collapse
Oh OK. I already have that one. But yes the tool looks great. You are awesome.
Sent from my MB886 using xda premium
devilsking said:
Which ICS did u flash? Bell or ATT? Do u notice any error during flash process ?, if yes, plz post screenshot here or type it here.
You can try to go back to JB while I figure out what happened to you. Plz provide information asap then I can help u.
Edit 1: I have tried to flash Bell ICS and it booted normally. Now I will try ATT ICS again =.='
Edit 2: Flashed ATT ICS again and it also booted. I think you should try to flash firmware again or download firmware again then flash. If you still meet problem after trying again, plz let me know. I'm happy to help you
Here is screenshot of my phone on ATT ICS:
Click to expand...
Click to collapse
can you post the zip you are using?
thanx
htchd2fix said:
can you post the zip you are using?
thanx
Click to expand...
Click to collapse
I downloaded from here: http://sbf.droid-developers.org/dinara/list.php
Great job bro. All we need it was an overall tool like this one
Sent from my MB886 using xda premium
devilsking said:
I downloaded from here: http://sbf.droid-developers.org/dinara/list.php
Click to expand...
Click to collapse
thanx
htchd2fix said:
thanx
Click to expand...
Click to collapse
U're welcome. Let me know if it works for u. Thanks.
Hello guys!
After learing a lot from these great devs arround here i decided to start to try out a new project! Multirom!!
You might or might not have heared of it, THE multi-boot mod for the Nexus 7. I found it and have decided to port it for our device.
First of all, it is a very initial release now. Though I have tested multiple cases and didn't find any problem except those in the bug list, bugs can arise. Do have a backup! Also, do read through the whole OP and 2nd post! If you don't understand something, rather read again and/or ask!
For more information on how it works and what it does, I suggest that you read the first few posts in the original thread. Those are very detailed and well-written posts that explain MultiROM in general. Installing roms to USB and Ubuntu/Ubuntu Touch of course doesn't work for our device atm.
Installation
The device must not be encrypted!
You need to flash the modified TWRP recovery that has MultiROM extensions. My version is based on the latest sources with gordon0001's device-specific modifications included. You can keep this recovery if you don't want to use MultiROM anymore and you like TWRP, because the MultiROM extensions don't interfere with other functions, even if the boot sector is not injected.
You have to flash a kernel that is capable of Kexec-hardboot.
Links
You can find everything at https://www.androidfilehost.com/?w=files&flid=32204.
multirom-20150521-v32-UNOFFICIAL-p880.zip : The multirom zip
CM12_Kernel_Patched.zip : CM 12 Kernel with Kexec-Hardboot Patch ; Thanks to @Adam77Root the patch and @laufersteppenwolf for building Kernel
multirom_uninstaller.zip : Selfexplaining
Known Bugs
-Reboot to recovery doesn't work.
-UI has some graphical bugs
-Double Press to boot Secondary Rom doesnt work -> Press twice on the Rom you want to boot and press Powerbutton at the same time till you recoginze a vibration
-You tell me more
Changelog
23 May 2015: Initial release
Credits
@Tasssadar for MultiROM, Kexec-hardboot for Nexus 7 and his help with debugging and porting
@Adam77Root for Thread Content
XDA:DevDB Information
[MOD][23 MAY] MultiROM v32, Tool/Utility for the LG Optimus 4X HD
Contributors
fritzcola
Version Information
Status: Testing
Created 2015-05-23
Last Updated 2015-05-24
Explanation
In the next two examples, I will refer any official, unofficial, or CM-based roms as CM. Keep this in mind.
I use the word 'injected', because MultiROM is actually injected into the boot partition. It works on any kernel that is capable of doing Kexec-hardboot (and if you don't want to use different kernel (i.e. you will use kernel sharing), it will work on unpatched kernels as well).
I may refer to non-shared kernel method as Kexec(-hardboot) method
Example scenario of multi-booting CM with CM and kernel sharing
You are on CM with MultiROM-capable recovery, patched kernel and MultiROM-injected and you want to install e.g. CarbonRom as second.
Boot into TWRP, navigate to Advanced->MultiROM and select 'Add ROM'. Since the base rom is CM, you can share the same kernel. It will be faster as there will be no hardboot needed.
The installation steps are easy and it doesn't take more time than a normal installation.
Example scenario of multi-booting CM with CM and different kernel
You are on CM with MultiROM-capable recovery, patched kernel and MultiROM-injected and you want to install e.g. CarbonRom as second.
Boot into TWRP, navigate to Advanced->MultiROM and select 'Add ROM'. Select 'Don't share'.
Continue with installation.
Now, since the target kernel (that is installed with the rom) is very likely not patched, you will have to flash one of my linked kernels to that rom. Do this by selecting 'List roms', selecting the desired rom, than 'Flash ZIP' and flashing one of the kernels I have patched.
You can only share kernels if you are on the same Android version for example 5.0.x!
Source Codes:
Tree
Any screenshot? I didn't understand the ui bugs. What are they ? Great work fritzcola I will install my device when ui bugs are solved
CrazyWinner said:
Any screenshot? I didn't understand the ui bugs. What are they ? Great work fritzcola I will install my device when ui bugs are solved
Click to expand...
Click to collapse
Look here! https://www.dropbox.com/s/whor0zf6xx7z4jh/VID_20150523_234854.mp4?dl=0
fritzcola said:
Look here! https://www.dropbox.com/s/whor0zf6xx7z4jh/VID_20150523_234854.mp4?dl=0
Click to expand...
Click to collapse
Ow it's no problem for me Installing now , great work !
thanks
its work good
HI @fritzcola i have this bugs
after flash kernel
system ui has stopped on Euphoria rom
sim internet not work on ResurrectionRemix+BlissPop rom
some rom need to disable sim (plane mod )or it got bootloop from home screen PAC-ROM LP rom
work before but now i have this.
many times when add lolipop rom in multiboot i get error
blkdiscrad faild: operation not supported on transport endpoint
e:error executing updater binary in zip '/tmp/mr_update.zip
faild to install zip
thanks
mater2 said:
HI @fritzcola i have this bugs
after flash kernel
system ui has stopped on Euphoria rom
sim internet not work on ResurrectionRemix+BlissPop rom
some rom need to disable sim (plane mod )or it got bootloop from home screen PAC-ROM LP rom
work before but now i have this.
many times when add lolipop rom in multiboot i get error
blkdiscrad faild: operation not supported on transport endpoint
e:error executing updater binary in zip '/tmp/mr_update.zip
faild to install zip
thanks
Click to expand...
Click to collapse
That error with executing bla bla bla is rom related!
I already have TWRP 2.8.6.0 installed. To use your MultiROM Mod do I just need to flash MultiROM zip? Or do I need to flash recovery img (I found in your link)?
Will the uninstall zip send me back directly to the Stock TWRP 2.8.6.0?
__________________________________________
It works. But I'm getting the same problem as @mater2.
"error executing updater binary in zip '/tmp/mr_update.zip";
I tried latest BlissPop 3.4 and Euphoria 1.1.
If it is ROM related how can we solve it?
I saw some users reporting the same problem with the Nexus 5. They said the problem was on the "updater-script" of the ROM.
Thanks for your work and attention.
Enviado de meu Optimus 4X HD usando Tapatalk
gugu6897 said:
I already have TWRP 2.8.6.0 installed. To use your MultiROM Mod do I just need to flash MultiROM zip? Or do I need to flash recovery img (I found in your link)?
Will the uninstall zip send me back directly to the Stock TWRP 2.8.6.0?
__________________________________________
It works. But I'm getting the same problem as @mater2.
"error executing updater binary in zip '/tmp/mr_update.zip";
I tried latest BlissPop 3.4 and Euphoria 1.1.
If it is ROM related how can we solve it?
I saw some users reporting the same problem with the Nexus 5. They said the problem was on the "updater-script" of the ROM.
Thanks for your work and attention.
Enviado de meu Optimus 4X HD usando Tapatalk
Click to expand...
Click to collapse
1. Create backup from primary rom
2. Wipe everything and install rom you want as secondary as primary
3. Make backup from Primary you want to have as secondary
4. Use option to add rom to MR with Backup
5. Restore backup from old Primary
Are iodak and werewolf supporting multirom ?
@fritzcola
@gugu6897
strange thing its work for me all roms i can multiboot after some days and try some roms except euphoria because its not work with patched kernal after that
the error Shows up i try to format every thing internal +cache+davlik
doesn't fix that .
its allow to add 4.4.4 or 4.1.2 rom but 5.0x didn't
thanks for your good work
CrazyWinner said:
Are iodak and werewolf supporting multirom ?
Click to expand...
Click to collapse
I tried Werewolf kernel. The answer is no [emoji17].
Enviado de meu Optimus 4X HD usando Tapatalk
@gugu6897 @CrazyWinner
the kernel in this post (patched kernel) only can used for multiboot.
when use patched kernel
maybe you will have bug with sim internet with all roms except blissbob.
every thing else work good
@CrazyWinner, looks like iodak (and mourta too) has kexec-hardboot, but my secondary ROM (MIUI v5) don't boot. I double tap it, but the device just power off.
Does someone know any ROM that works with MultiROM?
Enviado de meu Optimus 4X HD usando Tapatalk
Look at Known Bugs in post #1
Sent from my A0001 using XDA Free mobile app
fritzcola said:
Look at Known Bugs in post #1
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks, I forgot about that [emoji28].
Enviado de meu Optimus 4X HD usando Tapatalk
progress
is it 'save' and will you update this anytime soon??
an update to MultiROM v33 - MultiROM TWRP 3.0.0-1 would be amazing
Extractor 2.4 from @Alexey71
derders said:
an update to MultiROM v33 - MultiROM TWRP 3.0.0-1 would be amazing
Click to expand...
Click to collapse
+1
I just discover the win tool Extractor 2.4 from @Alexey71 , as I didn't succeed to get finish compiling mmb 5.1.1.37 (or 29), I played with @csk1jw 2xAosp LP &MM system.new.sdat:
http://forum.xda-developers.com/showpost.php?p=57742855&postcount=42
extraction + re-zip(boot.img+file_contexts +/system/) in @laufersteppenwolf Nameless 5.1.zip + twrp’ add 2nd multirom + reboot and IT JUST WORKS!
I can now multiboot, WITH Nameless 5.1 AS PRIMARY: mmb 5.1 as 2nd+
cm11+OEMlg JB (+ BlisspopLP+ crdoidLP).
Many thanks to native kexeced Nameless’ kernel for LP!
Unfortunately’ the re-zipped aosp MM did not boot (boot.img conflict? or primary slot required with kexec.. or I miss more).
I believe there won’t be any future update on mmbLP, so it will be good if, @csk1jw or @MoltenMotherBoard or @streambinder could make an old_fashion-zipped official ultimate edition to be used with gorgeous @fritzcola ’ multirom 2.8.6 .
Also if they explain me how to bake it, patched with microG, i try wakelockblocker's patch for a better battery control in ‘pure’ FLOSS.
I still hope that, in this combination, some could give a try to my infamous nightly-cm11+3; while waiting for a snappy MM snapshot...
http://forum.xda-developers.com/and...kelock-blocker-official-2016-nightly-t3393825
Basics multirom tips;
-If you think something is wrong, like battery drain or excessive reboot: in twrp menu go to advanced menu then fix permissions and re-flash multirom32 on primary rom before rebooting;
-Always use ext sdcard for twrp’s copy-backup and avoid using twrp’s File Manager to restore, otherwise they could be buried and waste your mem until a complete re-format; if needed: boot in primary rom (or install a rom ZIP!) and copy them to sdcard/twrp/backup/IdDevice… with your favorite apk.
-For better efficiency use native kexeced Nameless 5.1 for primary rom.
Actually I don’t know if mmb5.1 is 100% compatible with @laufersteppenwolf ‘s Nameless 5.1_kernel.
Be aware that the smell of night roasted marshmallows is scientifically attracting werewolves.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Fixed 3G Problem
APN Auto (Smart , Beeline, Cellcard,Metfone,Qb)
Removed T-Roaming
Fixed network Mode to WCDA and GSM Auto, WCDMA , GSM only
Clean Korean Apps
Fixed Call Locator from Location
Added Khmer Font and Keyboard
Added S5 TouchHome
Added Them Chooser (LG, SKY,SONY,Sense 5)
Add S5 SystemUI
Mod Icon S5
Added Note 4 and Note edge Wallpaper
Radio Work 100%
Mode Camera
Setting Mode S5
Convert Model to GT-I9300
Baseband Converted to GT-I9300
Removed Korean Dial Pad
Calender Khmer Default
Khmer Default Language
Auto Reset after flashed
odin flash able file
Base on Android 4.3
Base official Build for stable and daily use
Note : Please Back Up all important data before flashing . It will remove all ur data
Bugs:
U tell me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Download Section:
Google Drive Link : Download
Mirror Link : any one please help upload new link
Note :
Can flash only Galaxy S3 SHW-M440S 3G Korean Phone only !!!!!!!!!!!!! for who hate korean version !!!!!!!!!!!!!
Instruction to flash this ROM :
Instructions
Extract (unzip) the firmware file
Download Odin v3.10.6
Extract Odin ZIP file
Open Odin v.3.10.6
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Can Flash Any Version
Flash ready It Will go Recovery auto ( Don't Forget Factory Reset , And Wipe Cache)
Waiting a few minute for Booting
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Help support me by Click Thank and Donate on the future !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Screen Shoot Here :Click to See
Rule :
Please Keep My Credit any Copy Post with Permission !!!!!!!!!!!!!
Read more :
I would like to explain all about my work !!
1. This Rom is make on Android 4.3 edit from Stock Samsung Official for the stable one and daily use (I confuse to put on my post with 4.4.X)
2. Warning it is for SHW-M440S only Kernel not comparable with I9300
3. Odin package i build for Normal User they easy to understand to flash with odin
4. If every one want zip flashable i will make it ( i need free time to do it )
5. The most purpose in this rom is Convert from Koreaan version to international Version because Korean Version is very worst to use it come up with a lot of useless app , Korean language everywhere , system too big size with useless file . No Network mode to switch able , No radio , ****ing Slow , Bad UI , etc ..................................
thank everyoone hope u understand it !!!!!!!!!!!!!!!!!!!
XDA:DevDB Information
SHW-M440S Projeck by KU, ROM for the Samsung Galaxy S III I9300
Contributors
khmerupdate
Source Code: http://www.khmerupdaterom.com/2014/12/galaxy-s3-shw-m4440s-s5-mod-note-4-look.html
ROM OS Version: 4.3.x Jellybean
ROM Firmware Required: Can flash it with any version
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-12-21
Created 2015-06-06
Last Updated 2015-06-07
Screenshots please ?
Some screenshots would be nice! =D
for screenshots , click on the SCREENSHOTS tab above in op.
Is there a way to Get a flashable zip for the Recovery?
Andi17 said:
Is there a way to Get a flashable zip for the Recovery?
Click to expand...
Click to collapse
I flashed this with Odin, ths is noti FAIL, what happening?
naeroki_bi said:
I flashed this with Odin, ths is noti FAIL, what happening?
Click to expand...
Click to collapse
I prefer to Flash a zip File with the Recovery like all other Roms.
What? Flash this via twrp? Right?
But when i dowloaded this rom, this is 7z package, i extract this package then i see a tar package, when i extract this rom, i receive some file *.img as: system.img,data.img,...
Sent from my GT-I9300 using XDA Free mobile app
naeroki_bi said:
What? Flash this via twrp? Right?
But when i dowloaded this rom, this is 7z package, i extract this package then i see a tar package, when i extract this rom, i receive some file *.img as: system.img,data.img,...
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
u dont have to extract the zip file just move it on phone install and done..
xmixmaster said:
u dont have to extract the zip file just move it on phone install and done..
Click to expand...
Click to collapse
But in the Installation instructions is written to install with odin
1. Flash With Odin 3.0.9 up
2. Can Flash Any Version
3. Flash ready It Will go Recovery auto ( Don't Forget Factory Reset , And Wipe Cache)
4. Waiting a few minute for Booting
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Help support me by Click Thank and Donate on the future !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Screen Shoot Here : Click
In this case He have to znzip until the Tar
Costin Ramon said:
Screenshots please ?
Click to expand...
Click to collapse
please click on screen shoot at top
hey sir i need know this rom for GT-I9300 or for S3 SHW-M440S ???
and how flash it ?
CWM flashable zip please
GT-I9300 cihazımdan Tapatalk kullanılarak gönderildi
Hi guys,
I made a fashable zip of this rom and im uploading it right now.. approximately in 1 hour it will be finished, then ill share it
@khmerupdate, i need to know if this rom is a 4.4.4 or 4.3 build? in the screenshots it shows 4.3, but in the OP it is stated as 4.4.x?
and what kernel do you use for this rom? i included the kernel that was present in the odin flashable, but im not so sure about the kernel, i dont want anyone to have a bricekd phone because of me, although it is the kernel you provide in your odin flashable package..
im asking these to be sure the flashable zip is safe to flash for the i9300 users, i do not have an i9300 so i cant do tests to make sure, as long as i dont get answers to these questions i cannot share the zip file i uploaded.
according to your answers, im gonna make changes in the flashable zip i made or not, safety goes first !
fake !
This ROM 4.3 ! 4.4.4 not ! Do not download not safe
But this rom is 7z package. Is twpr recovery can flash 7z package?
Sent from my GT-I9300 using XDA Free mobile app
MaHo_66 said:
@khmerupdate, i need to know if this rom is a 4.4.4 or 4.3 build? in the screenshots it shows 4.3, but in the OP it is stated as 4.4.x?
and what kernel do you use for this rom? i included the kernel that was present in the odin flashable, but im not so sure about the kernel, i dont want anyone to have a bricekd phone because of me, although it is the kernel you provide in your odin flashable package..
im asking these to be sure the flashable zip is safe to flash for the i9300 users, i do not have an i9300 so i cant do tests to make sure, as long as i dont get answers to these questions i cannot share the zip file i uploaded.
according to your answers, im gonna make changes in the flashable zip i made or not, safety goes first !
Click to expand...
Click to collapse
Thank for u for question !!!!!!!!!!!!!!!!!!!!!
I would like to explain all about my work !!
1. This Rom is make on Android 4.3 edit from Stock Samsung Official for the stable one and daily use (I confuse to put on my post with 4.4.X)
2. Warning it is for SHW-M440S only Kernel not comparable with I9300
3. Odin package i build for Normal User they easy to understand to flash with odin
4. If every one want zip flashable i will make it ( i need free time to do it )
5. The most purpose in this rom is Convert from Koreaan version to international Version because Korean Version is very worst to use it come up with a lot of useless app , Korean language everywhere , system too big size with useless file . No Network mode to switch able , No radio , ****ing Slow , Bad UI , etc ..................................
thank everyoone hope u understand it !!!!!!!!!!!!!!!!!!!
khmerupdate said:
Features:
Fixed 3G Problem
APN Auto (Smart , Beeline, Cellcard,Metfone,Qb)
Removed T-Roaming
Fixed network Mode to WCDA and GSM Auto, WCDMA , GSM only
Clean Korean Apps
Fixed Call Locator from Location
Added Khmer Font and Keyboard
Added S5 TouchHome
Added Them Chooser (LG, SKY,SONY,Sense 5)
Add S5 SystemUI
Mod Icon S5
Added Note 4 and Note edge Wallpaper
Radio Work 100%
Mode Camera
Setting Mode S5
Convert Model to GT-I9300
Baseband Converted to GT-I9300
Removed Korean Dial Pad
Calender Khmer Default
Khmer Default Language
Auto Reset after flashed
odin flash able file
Base on Android 4.3
Base official Build for stable and daily use
Note : Please Back Up all important data before flashing . It will remove all ur data
Bugs:
U tell me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Download Section:
Google Drive Link : Download
Mirror Link : any one please help upload new link
Note :
Can flash only Galaxy S3 SHW-M440S 3G Korean Phone only !!!!!!!!!!!!! for who hate korean version !!!!!!!!!!!!!
Instruction to flash this ROM :
Instructions
Extract (unzip) the firmware file
Download Odin v3.10.6
Extract Odin ZIP file
Open Odin v.3.10.6
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Can Flash Any Version
Flash ready It Will go Recovery auto ( Don't Forget Factory Reset , And Wipe Cache)
Waiting a few minute for Booting
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Help support me by Click Thank and Donate on the future !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Screen Shoot Here :Click to See
Rule :
Please Keep My Credit any Copy Post with Permission !!!!!!!!!!!!!
Read more :
I would like to explain all about my work !!
1. This Rom is make on Android 4.3 edit from Stock Samsung Official for the stable one and daily use (I confuse to put on my post with 4.4.X)
2. Warning it is for SHW-M440S only Kernel not comparable with I9300
3. Odin package i build for Normal User they easy to understand to flash with odin
4. If every one want zip flashable i will make it ( i need free time to do it )
5. The most purpose in this rom is Convert from Koreaan version to international Version because Korean Version is very worst to use it come up with a lot of useless app , Korean language everywhere , system too big size with useless file . No Network mode to switch able , No radio , ****ing Slow , Bad UI , etc ..................................
thank everyoone hope u understand it !!!!!!!!!!!!!!!!!!!
XDA:DevDB Information
SHW-M440S Projeck by KU, ROM for the Samsung Galaxy S III I9300
Contributors
khmerupdate
Source Code: http://www.khmerupdaterom.com/2014/12/galaxy-s3-shw-m4440s-s5-mod-note-4-look.html
ROM OS Version: 4.3.x Jellybean
ROM Firmware Required: Can flash it with any version
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-12-21
Created 2015-06-06
Last Updated 2015-06-07
Click to expand...
Click to collapse
All member please read on Discussion again
Here is the flashable zip of this rom for the i9300, GT-I9300-4.4.4-Note4-V1-KU.zip
Only change i made is that i changed the kernel to boeffla 5.8 stable for JB i9300 and also added the boeffla config app, nothing else that i changed in the rom.
- no modem is included, so you will keep your modem
- and FYI this is a odexed rom
Rom is now safe to flash for i9300 users, just dont forget to make a nandroid backup of your current system and do a wipe data/factory reset in recovery before flashing if you decide to try it.
in any case im not responsible for anything bad that might happen!!!
I didn't responsible if your device:
- Bricked
- Bootloop
- Dead SD Card
- Broken EMMC Card
Please do this With your own risk!
Click to expand...
Click to collapse
Hi! I want to share this rom. Its Zenfone Go rom.
Features:
- Odexed rom
- Asus styled (except NavBar)
- Asus apps
- Your phone will be readed to all server as a Asus Zenfone Go
And many more!
Some bugs:
Camera didn't save to external memory
Download Links
Full Rom:
https://drive.google.com/file/d/0B8bUyQ0TAWFbdU9xU1F3cnRXVWM/view
Bug fixes(NavBar, SIM card, Camera):
https://drive.google.com/file/d/0By8iOMJkcoRDSGx1ZFU1a25xWjg/view
Remember to made a backup before installing!
How to install:
- Go to TWRP
- Factory reset/Format Data
- Install Full Rom
- Install bug fix
- Reboot
And viola! You have installed this rom.
PLEASE USE INFINIX ROM BEFORE INSTALLING THIS ROM. IF YOU INSTALL IT IN ANDROID ONE ROM, YOU PHONE WILL GET BRICKED
If you get stucked at Checking Info, switch the sim card.
THIS ROM ISNT ROOTED ALREADY, PLZ ROOT AGAIN VIA TWRP.
Credits:
- User Infinix Hot 2 Indonesia group
- Ir. Soekarno (No, this is his facebook name si dont rhink this is indonesian 1st president)
- Rizaldi Dwi Bawonoyudo
- Developers of Needroms.com
- Darjiyo P.O
- Roy Haryadi
XDA:DevDB Information
Asus Zenfone Go, ROM for the Infinix HOT 2
Contributors
RendyAK, Rizaldi Dwi Bawonoyudo, Darjiyo P.O
ROM OS Version: 5.1.x Lollipop
Based On: ZenUI
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2016-02-13
Last Updated 2016-02-24
Reserved
Q&A
Q: Why i can't flash this on android one rom?
A: http://forum.xda-developers.com/hot-2/development/rom-asus-zenfone-t3308449/post65273979
Q: Is this rom for 2GB or 1GB version of IH2?
A: Both Infinix Hot 2
Q: Why my device are detected by all server as Asus Zenfone Go?
A: Well, the rom porter isn't edit anything (except some of important thing to get properly booted) and the dev Not touch the build.prop!
Q: I get bricked!
A: Reflash from your backup
Q: What is this android version?
A: Lollipop 5.1
Q: Is Asus's theme engine work?
A: No.
Q: Is Double tap to wake work?
A: No
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is this an update or just same as previous one?
4peace1 said:
Is this an update or just same as previous one?
Click to expand...
Click to collapse
As i said, i move the thread.
So this is the new thread, the old one gonna locked.
Well, there is no update.
hi all
my mobile is x510 android one
and i want install infinix rom
but when install it mobile is bricked
can any one help me how to downgread from android one to lollipop infinix rom ?
I installed your rom. It's awesome but I have a problem with sim card.
It shows my career but no signal.
Tried to search for networks manually but didn't find any network
Any help???
can i flash it with infinix or SP flash tool ?
Successfully flashed the Rom and am seriously enjoying it ....
Very stable and smooth!
No bugs so far.
---------- Post added at 01:17 PM ---------- Previous post was at 01:12 PM ----------
Romancy said:
hi all
my mobile is x510 android one
and i want install infinix rom
but when install it mobile is bricked
can any one help me how to downgread from android one to lollipop infinix rom ?
Click to expand...
Click to collapse
Go and check my thread here Infinix 5.1 XUI Rom for X510
Also checkout my Tutorial on how to use sp flash tool here .
Full SP flash tool tutorial
Noob question:
Does it work with the Android One version of the phone ?
My friend needs a new rom with different UI cause he's fed up with the old sale android ui.
amirmaher said:
I installed your rom. It's awesome but I have a problem with sim card.
It shows my career but no signal.
Tried to search for networks manually but didn't find any network
Any help???
Click to expand...
Click to collapse
Try to re-install the rom
ProRedFed said:
can i flash it with infinix or SP flash tool ?
Click to expand...
Click to collapse
No, flash from TWRP, and first you must installed infinix rom.
Nonta72 said:
Noob question:
Does it work with the Android One version of the phone ?
My friend needs a new rom with different UI cause he's fed up with the old sale android ui.
Click to expand...
Click to collapse
no.
Bolumstar said:
Successfully flashed the Rom and am seriously enjoying it ....
Very stable and smooth!
No bugs so far.
---------- Post added at 01:17 PM ---------- Previous post was at 01:12 PM ----------
Go and check my thread here Infinix 5.1 XUI Rom for X510
Also checkout my Tutorial on how to use sp flash tool here .
Full SP flash tool tutorial
Click to expand...
Click to collapse
Should i remind you, but there is no XUI for X510?
RendyAK said:
Should i remind you, but there is no XUI for X510?
Click to expand...
Click to collapse
Yeah, my mistake, I kept calling Infinix 5.1 ROM for
X510 XUI trying to differentiate it from Android one
Stock firmware. Anyways, I believe you understand
What I meant but I'll try to correct that
RendyAK said:
no.
Click to expand...
Click to collapse
OKAY!
But what's the matter with Android One version ?
Why is it so different if from the standard one?
BTW, I read here that I could flash roms of Infinix to my Android One Hot 2 using SP Flash Tool.
http://forum.xda-developers.com/showpost.php?p=65368714&postcount=119
Nonta72 said:
OKAY!
But what's the matter with Android One version ?
Why is it so different if from the standard one?
BTW, I read here that I could flash roms of Infinix to my Android One Hot 2 using SP Flash Tool.
http://forum.xda-developers.com/showpost.php?p=65368714&postcount=119
Click to expand...
Click to collapse
Its different, its use scatter to be readed at flash tool, and cant be readed in recovery. So, you need to use TWRP.
And for the android one problem. It has different partition with infinix rom. If you flash it on android one, your system will not get mounted.
Read this
http://forum.xda-developers.com/hot-2/development/rom-asus-zenfone-t3308449/post65273979
RendyAK said:
Its different, its use scatter to be readed at flash tool, and cant be readed in recovery. So, you need to use TWRP.
And for the android one problem. It has different partition with infinix rom. If you flash it on android one, your system will not get mounted.
Read this
http://forum.xda-developers.com/hot-2/development/rom-asus-zenfone-t3308449/post65273979
Click to expand...
Click to collapse
Partition table issue can be fixed if the fstab.mt6580 is properly edited in recoveries.
The same way, the android scatter file can be modded to match the android one version.
The things that really matter in ROM porting are the ARCH, the CPU and the android version.
Nonta72 said:
Partition table issue can be fixed if the fstab.mt6580 is properly edited in recoveries.
The same way, the android scatter file can be modded to match the android one version.
The things that really matter in ROM porting are the ARCH, the CPU and the android version.
Click to expand...
Click to collapse
Well, idk it will work. But, i dont think the rom size will be fit in android one rom. But if you can fix this, i really appreciate it.
Nonta72 said:
Partition table issue can be fixed if the fstab.mt6580 is properly edited in recoveries.
The same way, the android scatter file can be modded to match the android one version.
The things that really matter in ROM porting are the ARCH, the CPU and the android version.
Click to expand...
Click to collapse
I still think it will be be very difficult to make this
ROM fit into Android one partition by flashing it
Through TWRP recovery.
The size it occupies on the system partition after the zip
Is installed is about 1.96Gb which is bigger than the
Android one FIRMWARE system partition.
If there's a way to re write the script to reformat the
/system partition to make it larger then no problem.
I've used Android one partition to restore my full
Backup done in Infinix 5.1 Rom and vise versa but the
Content of both backup for the system partition
were not more than 1.6Gb
Anyways, am really enjoying this ROM
I got SOT of 5 hours and I was using as a hotspot for
My Samsung galaxy note 2
Rooted with xposed and greenify installed.
Bolumstar said:
I still think it will be be very difficult to make this
ROM fit into Android one partition by flashing it
Through TWRP recovery.
The size it occupies on the system partition after the zip
Is installed is about 1.96Gb which is bigger than the
Android one FIRMWARE system partition.
If there's a way to re write the script to reformat the
/system partition to make it larger then no problem.
I've used Android one partition to restore my full
Backup done in Infinix 5.1 Rom and vise versa but the
Content of both backup for the system partition
were not more than 1.6Gb
Anyways, am really enjoying this ROM
I got SOT of 5 hours and I was using as a hotspot for
My Samsung galaxy note 2
Rooted with xposed and greenify installed.
Click to expand...
Click to collapse
Is the rom deodexed ?
And I think both devices partitions can be modded by editing the EBR files (EBR1 & EBR2). There is a tool that can do that automatically, but I am not sure it will work on MT6580 because the new MTK CPUs are a bit different.
In fact,
MTK Kitkat ROMs and bellow kitkat have the "MTK" header (i.e MTK ROM format).
But, MTK devices that comes with LP 5.x have "STD" header (i.e Standard ROM format).
Thus, most tools for MTK won't work on the new cpus files.
Here's the tool http://forum.xda-developers.com/android/general/howto-modify-ebr-mediatek-devices-t2769604
DO IT AT YOUR OWN RISKS !
Nonta72 said:
Is the rom deodexed ?
And I think both devices partitions can be modded by editing the EBR files (EBR1 & EBR2). There is a tool that can do that automatically, but I am not sure it will work on MT6580 because the new MTK CPUs are a bit different.
In fact,
MTK Kitkat ROMs and bellow kitkat have the "MTK" header (i.e MTK ROM format).
But, MTK devices that comes with LP 5.x have "STD" header (i.e Standard ROM format).
Thus, most tools for MTK won't work on the new cpus files.
Here's the tool http://forum.xda-developers.com/android/general/howto-modify-ebr-mediatek-devices-t2769604
DO IT AT YOUR OWN RISKS !
Click to expand...
Click to collapse
Nope, isnt deodexed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Requirements:
1. TWRP
2. A ROM to patch
3. DualBootPatcher app
What does the app do ?
It patches...
Kernel's ramdisk for dual boot support
ROMs so that they can be installed as secondary
Google Apps packages for AOSP-based ROMs
SuperSU so that it can be used in the secondary ROM
How to use the App ?
Note:
- Some roms like Infinix 5.1 make External Storage the default disk. That also removes the writing access to the Internal storage. So, any attempt to install a secondary ROM to /data/media will likely fail. The solution is to remove your external storage (SD Card), install the rom and put it back (unless you want to install to the external storage itself).
1) Download, install and open the app
2) Swipe to the right to open the menu. Click "ROMS". Now if this is the first time you use it, it will ask you if you want to set kernel. Do so!
Note:
You might see something like "mbtool rejected connection" blablablabla, Just click OK or Continue!
3) Now swipe again and click on "Patch Zip". Click the big add (+) button and select "Add Flashable Zip" and select the ROM you want to patch and use as Dual/Multiboot.
3) Select your device in the first drop down menu. Then select the partition configuration (see more details below for this) in the next drop down menu. I suggest you choose either "Data slot" or "Extsd slot". Give a random number where it states "Enter an ID".
4) Click continue and select where to save the patched file.
5) You should see the file is being put in "Queue". Just click the confirm button to the upper right.
Note: If you want to go back, just swipe the ROM in queue to right and start over.
6) The app will patch the zip. When done, go back to "ROMs".
7) Click "Flash zip files" (the big button on the lower right). Click the plus button to add your previously patched zip file.
8) Locate the file you have patched in step 6. Unless you have changed the name there, it should be something like ROM_name_partition_config_ID.zip (like Cyanogenmod-12.1_20160724_d5110_infinix_data-slot-2.zip).
9) Click on that file and choose "Keep location". Now confirm the flash with the button on the upper right side.
Note: You can also install the patched zip files in recovery.
10) Upon finition, click back and you should see your newly installed ROM along with the Primary ROM.
Note: You can find more options by clicking on the three buttons on each ROM.
Partitions Configurations:
These are places where you can install secondary roms. In our case, I'm affraid it's limited to DATA SLOTS and EXTSD SLOTS. Which means you can only install roms to your Data partition (pratically your internal storage) and your SD Card.
Primary: This is normally used for installing a zip to the primary ROM. It is not required, but is strongly recommended because it has code to prevent the zip from inadvertently affecting other ROMs. This one installs to the System partition slot.
Dual: Dual/Secondary is the first multiboot installation location. It installs to the system partition. This is a good spot for installing a second ROM because it doesn't take any space away from the internal storage. Our HOT 2 system partition size is about 2.5GB on Infinix ROM. You can probably install two light ROMs (like cyanogenmod and its variants) to it. But I haven't tested it.
Multi-slots: There are 3 multislots: multi-slot-1, multi-slot-2, multi-slot-3. These install to the cache partition. This is specifically for devices, like the Galaxy S4, that have a massive cache partition. Our HOT 2's cache partition is about 250MB which is not enough to install a rom on.
Data-slots: There can be an unlimited number of data slots. These install to the data partition and eat up space on the internal storage. This is useful for devices where the system partition is nearly full and the cache partition is tiny. These slots are named "data-slot-[id]", where "id" is something you provide in the app.
Extsd-slots: Same as the above, but it installs the ROMs to your external SD. Make sure you have backed up your data first!
Other how to ?
Wipe /cache, /data, /system, or dalvik-cache?
The easiest way is to do it from the app while booted in another ROM. Just go to "Roms" in the navigation drawer, tap the 3 dots options menu for the ROM you want to wipe, and tap "Wipe ROM".Update the primary ROM?
Patch the zip for primary and flash it. The "primary" installation target is designed so that other ROMs won't be affected when you want to flash something for the primary ROM.Update a non-primary ROM?
Patch and flash the zip exactly like how you did it the first time.Flash a mod or custom kernel for the primary/non-primary ROM?
Patch it for primary before flashing. If the zip does not wipe /cache, it is also safe to flash it directly.
Downloads:
Get it from chenxiaolong's site: https://dbp.noobdev.io/
Sources
Fork of DualBootPatcher with more devices support: https://github.com/Rendyindo/DualBootPatcher
DualBootPatcher: https://github.com/chenxiaolong/DualBootPatcher
DualBootUtilities: https://github.com/chenxiaolong/DualBootZips
Credits:
@chenxiaolong for the awesome DualBootPatcher. @Nonta72 For his thread which I copy 95% of it
XDA:DevDB Information
DualBootPatcher, Device Specific App for the Infinix HOT 2
Contributors
RendyAK
Version Information
Status: Stable
Created 2017-04-18
Last Updated 2017-05-11
How to update ramdisk?
Go to the app, click on roms, click the triple dot in the rom you want to update the ramdisk, and press Update Ramdisk, done.
For other device
X553 is for Infinix Hot 3 4G version!
X554 is for Infinix Hot 3 3G version!
Something broke?
Give a screenshot here.
Great work!
How about the external sd on android one 6.0. Is it already fixed?
Edited:
Great work bro. Now everything working fine bro, SD card, boot ui and other
Hello everyone!
Since IH2 finally officialy supported, I'm going to use this thread as guide for Infinix Hot 3~
Great stuffs here.
Keep it up!
Nonta72 said:
Great stuffs here.
Keep it up!
Click to expand...
Click to collapse
Thanks
OP edited a bit for devices
Also thread name edited
@RendyAK I want to install lineage OS 13 on the dual partition. My primary ROM is XOS ROM by Mysteragr. The free space of system partition is 768.8mb. What I want to know is that will the data and cache portion be installed on the /system or on the /data partition?
Sent from my Infinix Hot 2 using Tapatalk
---------- Post added at 01:35 PM ---------- Previous post was at 01:32 PM ----------
Will it boot properly without bootloop?
Sent from my Infinix Hot 2 using Tapatalk
---------- Post added at 01:38 PM ---------- Previous post was at 01:35 PM ----------
Why stock ROM don't allow app sharing? Stock ROM don't allow Ramstick update why?
Sent from my Infinix Hot 2 using Tapatalk
Oluseun said:
@RendyAK I want to install lineage OS 13 on the dual partition. My primary ROM is XOS ROM by Mysteragr. The free space of system partition is 768.8mb. What I want to know is that will the data and cache portion be installed on the /system or on the /data partition?
Sent from my Infinix Hot 2 using Tapatalk
---------- Post added at 01:35 PM ---------- Previous post was at 01:32 PM ----------
Will it boot properly without bootloop?
Sent from my Infinix Hot 2 using Tapatalk
---------- Post added at 01:38 PM ---------- Previous post was at 01:35 PM ----------
Why stock ROM don't allow app sharing? Stock ROM don't allow Ramstick update why?
Click to expand...
Click to collapse
1. In data
2. Boot ofc
3. I dunno anything abour stockrom, maybe update the ramdisk?
RendyAK said:
1. In data
2. Boot ofc
3. I dunno anything abour stockrom, maybe update the ramdisk?
Click to expand...
Click to collapse
As of your answer number 3 stock ROM don't allow update of ramdisk.
Sent from my Infinix Hot 2 using Tapatalk
Oluseun said:
As of your answer number 3 stock ROM don't allow update of ramdisk.
Click to expand...
Click to collapse
No, it does allow ramdisk to be updated.
RendyAK said:
No, it does allow ramdisk to be updated.
Click to expand...
Click to collapse
How? I try it on Infinix Stock ROM and XOS ROM(by Mysteragr) the ramdisk refuse to be updated. This prevent app sharing on the stock and XOS ROM. So how can I make the ramdisk to be updated on the stock and XOS ROM?
Sent from my Infinix Hot 2 using Tapatalk
Oluseun said:
How? I try it on Infinix Stock ROM and XOS ROM(by Mysteragr) the ramdisk refuse to be updated. This prevent app sharing on the stock and XOS ROM. So how can I make the ramdisk to be updated on the stock and XOS ROM?
Click to expand...
Click to collapse
Just like you do usually, triple dot in the roms list, Update ramdisk, done.
and I already said this, but, plz screenshot if anything goes wrong.
RendyAK said:
Just like you do usually, triple dot in the roms list, Update ramdisk, done.
and I already said this, but, plz screenshot if anything goes wrong.
Click to expand...
Click to collapse
I know this very well. I notice you are using two custom ROM. I'm using one stock and the other custom ROM. XOS ROM a and Remix resurrection ROM. Look at the screenshot below. The primary ROM is XOS ROM. It refuse app sharing and ramdisk update. http://cloud.tapatalk.com/s/591757e6b93da/Screenshot_2017-05-13_194050.jpg?
http://cloud.tapatalk.com/s/591757f8ad7b4/Screenshot_2017-05-13_194211.jpg?
http://cloud.tapatalk.com/s/5917581d47d83/Screenshot_2017-05-13_194225.jpg?
Sent from my Infinix Hot 2 using Tapatalk
Oluseun said:
I know this very well. I notice you are using two custom ROM. I'm using one stock and the other custom ROM. XOS ROM a and Remix resurrection ROM. Look at the screenshot below. The primary ROM is XOS ROM. It refuse app sharing and ramdisk update. http://cloud.tapatalk.com/s/591757e6b93da/Screenshot_2017-05-13_194050.jpg?
http://cloud.tapatalk.com/s/591757f8ad7b4/Screenshot_2017-05-13_194211.jpg?
http://cloud.tapatalk.com/s/5917581d47d83/Screenshot_2017-05-13_194225.jpg?
Click to expand...
Click to collapse
Okay.
Now give me the ramdisk-update.log file. From /sdcard/Multiboot folder.
RendyAK said:
Okay.
Now give me the ramdisk-update.log file. From /sdcard/Multiboot folder.
Click to expand...
Click to collapse
Here is it. Maybe I'm got something wrong that you can help me fix. http://cloud.tapatalk.com/s/59187dc94404b/ramdisk-update.zip
Sent from my Infinix Hot 2 using Tapatalk
Oluseun said:
Here is it. Maybe I'm got something wrong that you can help me fix. http://cloud.tapatalk.com/s/59187dc94404b/ramdisk-update.zip
Click to expand...
Click to collapse
It is* I've*
Okay this is new.
If you're using Infinix Hot 2, try using the official instead, dont use my build
Edit: Also if you're in MM, can you give me the full path to by-name folder in /dev?
Edit 2: also make sure you select the correct partition scheme!
My default ROM is XOS ROM v4 by Mysteragr. I'm using the official app "DualBootPatcherAndroid-9.2.0.r88.g35a35a6-snapshot.apk". I don't understand the /Dev path you are talking about.
Sent from my Infinix Hot 2 using Tapatalk
Oluseun said:
My default ROM is XOS ROM v4 by Mysteragr. I'm using the official app "DualBootPatcherAndroid-9.2.0.r88.g35a35a6-snapshot.apk". I don't understand the /Dev path you are talking about.
Click to expand...
Click to collapse
Since the problem is the DBP can't flaah the new boot image to device, the problem maybe in the boot mountpoint, im going ro do reseaech about it with another MM users, since only you the one who face this problem.
RendyAK said:
Since the problem is the DBP can't flaah the new boot image to device, the problem maybe in the boot mountpoint, im going ro do reseaech about it with another MM users, since only you the one who face this problem.
Click to expand...
Click to collapse
The infinix stock rom can have its ramdisk updated. I'm using the latest XOS version 5 yet I still experience the same problem. I can update the ramdisk of infinix stock rom is 5.1 and share applications data across the rom but it's not possible on XOS as the ramdisk refuse to be updated.
Sent from my Infinix X510 using Tapatalk