I would like to know what is the relation of Model & MID and CID?
My issue is that I have a Asia HK edition of M7 (M7_UL) with a CID of HTC__622 and a MID of PN0714, but I do not get any sense of their relation to each other. I do understand that M7_UL determines my hardware? But then why the MID?
I unlocked my bootloader in hope that i can flash other stock rom to get rid of the HK version and have some WWE, but since I do not have S-OFF (hboot 1.57) i could not change my CID or MID to be able to flash a WWE. And since there is only payware (sunshine) to get S-OFF now, i would like to be sure if my idea would work to move from HK to WWE without loosing functionality or bricking my device (I'm from Europe).
Thanks for any HOWTOs and TIPs, advices!
Srage87 said:
I would like to know what is the relation of Model & MID and CID?
My issue is that I have a Asia HK edition of M7 (M7_UL) with a CID of HTC__622 and a MID of PN0714, but I do not get any sense of their relation to each other. I do understand that M7_UL determines my hardware? But then why the MID?
I unlocked my bootloader in hope that i can flash other stock rom to get rid of the HK version and have some WWE, but since I do not have S-OFF (hboot 1.57) i could not change my CID or MID to be able to flash a WWE. And since there is only payware (sunshine) to get S-OFF now, i would like to be sure if my idea would work to move from HK to WWE without loosing functionality or bricking my device (I'm from Europe).
Thanks for any HOWTOs and TIPs, advices!
Click to expand...
Click to collapse
MID is the model number. All M7_UL have MID starting with PN071 have the same internals
PN0710000 for WWE version
PN0712000 for Dev edition, GPE edition, AT&T/Rogers
PN0714000 for Asia/HongKong version
The only exception is PN0711000 which is a M7_U (without LTE) and have a different modem.
With s-off you can change your MID from PN0714000 to PN0710000, your CID from HTC__622 to HTC__001 and flash a x.xx.401.x RUU so your phone will be converted to stock european WWE version.
Related
hi
i am want ask if i install rom cid: htc__001 on this device cid: BS_US001 will be work or she is don't compatible ?
P.R.F.S said:
hi
i am want ask if i install rom cid: htc__001 on this device cid: BS_US001 will be work or she is don't compatible ?
Click to expand...
Click to collapse
Fist of all, no need to start another thread for this, you should have posted this HERE
And the answer is NO. If you want to flash a HTC__001/PN0710000 rom you need the same CID and MID of the rom
CID mean Carrier ID and sometime called Cell ID or Country ID, its basically a kind of carrier lock / region lock.
so your phone have BS_US001 CID and PN0712000 MID, that mean it software (.1540 base) is intended for US market (brightstar us developer edition) and compatible for Model PN0712000
HTC__001 is for EMEA region (EUROPE, MIDLE EAST and AFRICA) and its sw base is .401 and compatible with model PN0710000
The only way to install a rom with different CID/MID is the achieve S-OFF and then modify your CID and MID.
BTW all those informations can easily be found on this forum if you search a little. Here are some threads you should take a look at:
http://forum.xda-developers.com/showthread.php?t=2223236
http://forum.xda-developers.com/showthread.php?t=2535365
http://forum.xda-developers.com/showthread.php?t=2541082
I have an htc one, I changed the cid and mid to Dev Edition - CID: HTC__001 and MID: PN0712000. I updated firmware for 4.4 thru fast boot using an international custom fastboot. I want to change back to stock T-Mobile CID: T-MOB010 and MID: PN0713000 so I can flash stock tmobile firmware to update 4.4.2. I'm able to change cid to T-MOB010 but I cannot change mid to PN013000. Can someone please help!!!
sch-i760 said:
I have an htc one, I changed the cid and mid to Dev Edition - CID: HTC__001 and MID: PN0712000. I updated firmware for 4.4 thru fast boot using an international custom fastboot. I want to change back to stock T-Mobile CID: T-MOB010 and MID: PN0713000 so I can flash stock tmobile firmware to update 4.4.2. I'm able to change cid to T-MOB010 but I cannot change mid to PN013000. Can someone please help!!!
Click to expand...
Click to collapse
If you have S-OFF, then follow this link to change your mid:
http://forum.xda-developers.com/showthread.php?t=2535365
thanx it helped me change mid but??
thanx it helped me change mid but even though it corrected mid to PN071300 and my cid is T-MOB010. im not able to udate the firmware through a tmobile ruu. I run the ruu it says error55 unknown error. please get correct rom utility.
sch-i760 said:
thanx it helped me change mid but even though it corrected mid to PN071300 and my cid is T-MOB010. im not able to udate the firmware through a tmobile ruu. I run the ruu it says error55 unknown error. please get correct rom utility.
Click to expand...
Click to collapse
please post your fastboot getvar all minus imei/sn and post a link to the ruu you are trying to install.
Hi everybody I restored my htc one to stock by ruu.exe for European models because my phone is with spain vodafone and changed my cid to supercid and restored successfully. After that i changed my cid to original one Vodap304. But cid getter is showing vodap304 at top and htc_001 is below as main cid, can i get ota or i will brick my phone or do i need to change vodap304 to htc_001.please help
Hi, i've been on my htc one for a while and now i'm moving to lg g3, i wanted to restore my one to his stock status but i can't use RUU, i get error 158.
i'm using RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1.
i tryied to modify CID to HTC_032 (because it was tmobile one, but my phone is the european version) and i checked model id via fastboot wich is PN0710000 (so that's right), I also relocked my phone and checked RUU's MD5 but the problem still occur. what am i missing?
Prototypefab said:
Hi, i've been on my htc one for a while and now i'm moving to lg g3, i wanted to restore my one to his stock status but i can't use RUU, i get error 158.
i'm using RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1.
i tryied to modify CID to HTC_032 (because it was tmobile one, but my phone is the european version) and i checked model id via fastboot wich is PN0710000 (so that's right), I also relocked my phone and checked RUU's MD5 but the problem still occur. what am i missing?
Click to expand...
Click to collapse
Could you post your fastboot getvar all please ?
Also, you cant change your cid with the bootloader locked.
ther following CID's all belong to the same RUU European family so as long as yours is one of these then there is no need to change it:
HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
Restore this backup http://forum.xda-developers.com/showthread.php?t=2992871
With correct CID and MID
Flash same firmware
Lock bootloader
That's it
Hi all
Got problem here. Got my phone 2 days ago with Sprint I think. Then I decided to change to other, so Ive download RUU from htc1guru.
RUU Zip M7 U JB 50 HTC Europe 1.29.401.2 R Radio 4A.14.3250.13 10.33.1150.01 Release 311663 Signed 2 4 Decrypted
my CID : 11111111
my MID : PN0710000
S-Off and Relocked
flash the RUU using ADB fastboot, success then it went to bootloop. Non stop bootloop, no recovery.
Any tips, solution to settle this
Thank you and sorry for my bad English. :good:
mellowdrumatic said:
Hi all
Got problem here. Got my phone 2 days ago with Sprint I think. Then I decided to change to other, so Ive download RUU from htc1guru.
RUU Zip M7 U JB 50 HTC Europe 1.29.401.2 R Radio 4A.14.3250.13 10.33.1150.01 Release 311663 Signed 2 4 Decrypted
my CID : 11111111
my MID : PN0710000
S-Off and Relocked
flash the RUU using ADB fastboot, success then it went to bootloop. Non stop bootloop, no recovery.
Any tips, solution to settle this
Thank you and sorry for my bad English. :good:
Click to expand...
Click to collapse
You can't convert a M7WLS (sprint) HTC One to another version. This variant doesn't have the same partition layout and same radio. The only thing you can do is to relfash a Sprint RUU to get it working again, then after you can flash a Sprint custom rom using a Sprint custom recovery.... everything must be made for the sprint variant.
You can still sim-unlock it so it can be used on GSM network but you won't get full connectivity because of the different radio. Forget about LTE if you're not on the sprint network.
In general if the 5th character from the left of your MID is different than the one listed for the RUU, it is not compatible.
i.e
Sprint: PN0720000
can not be converted to
WWE: PN0710000
WWE: PN0710000
can be converted to
GPE/DEV edition: PN0712000
So revert your MID to sprint, and while you are at it, better to revert your CID to sprint (supercid on sprint variant is totally useless since you can only flash sprint RUU/firmware on it and those RUU/firmware will all have the same CID: SPCS_001), then flash a sprint RUU.