MK kernel for Stock Base Roms 4.1.2 - Links & Discussion - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

Hi guys...i'm moving all discuttion of MK kernel for stock 4.1.2 from Sami OS thred to here so that Developemnt therad of SamiOS remains clean
Kernel & link
latest version with No teraing and almost bug free... here are some changes/review
#version3Latest Version Download
#version4One more version it should work for i9070P & some more features
NOTE : This is not my work , @mkaluza initiated it for CM and @PolishVodka made it available for Stock 4.1.2 you should thank them both
Below is Older version with some bugs mentioned below...so not recommended !
PolishVodka said:
Here is mkaluza's kernel for stock JB, working:
Click to expand...
Click to collapse
http://www.mediafire.com/?x6gw3cg833x8k51
To install Flash zip in cwm or twrp
Personally I use smartassv2 (more smooth than default dynamic which is more battery friendly ! )
1.2GHz OC
And some init.ds to make UI more smoother...which you can find here
You guys should check mkaluza wikis in github too . Lots of useful info there, especially this:
https://github.com/mkaluza/project-zen/wiki/Janice-performance-settings
and Dynamic governor related wiki:
https://github.com/mkaluza/project-zen/wiki/Dynamic-governor
To all
some more info about MK stock kernel
Ram available for user was 647 MB for me ( 650 i n latest ! )
multitasking and app loading was exceptionally better !
to newbies plz don't blindly follow cocore commands/ init.d here bcz there are some changes here..[B].if you don't understand or used to with kernel commands and things , I advised you to stay way from this kernel for little while till final build comes[/B]
you can go for it now
and keep one thing in mind nandroid back up created by phillz recovery won't work with simple CWM ( atleast it didn't work for me) though it works with phillz
so if you use this kernel and you need to take backup... flash cocore and do it ...or use temporary CWM
Some discussion
1st one here is about 1st build...so if you wasn't aware of it you can skip this one and go to review directly
hastalafiesta said:
Try to extract 4.1.2 ramdisk and put it in /efs, then flash mkaluza kernel.
I have followed this simple step to make it bootable on cm 10.1.
You can find the guide to extract it on mkaluza thread.
Click to expand...
Click to collapse
it won't work like that in stock 4.1.2 but
anyway @PolishVodka made one more build and it booted ..i tested it...there are some minor bugs in it which i reported and he will make final build and publish it... ( though i didn't get reply yet... may be this is because of time difference and when i reported there should be night
here is copy of my final review which i send to him
PSS : you got my reply about kernel booting right ?
Click to expand...
Click to collapse
Yes, yes I got your previous message.
No problem I can wait till tomorrow for your review. Thank you.
Click to expand...
Click to collapse
good stuff 1st
performance is exceptionally good ...i mean very very good especially with smartassv2
battery life is decent with smartassv2 & dynamic
no random reboot at all with OC @1.2
overall very stable
now some bugs
i alreay told yesterday about faint horizontal lines ( though they are not hurting much but still if they can be removed it'll be great ) & Jumpy UI
now one weird bug and it must be fixed ...is when we rotate screen it flickers very badly and turn offs this problem is lesser in smartassv2 & excessive in dynamic
see videos below
smartassv2
dynamic
you can see smartass v2 can open COC without waking screen while in dynamic i have to wake it ( actually screen doesn't look it self but it turns off so to wake it i hve to lock it and unlock it again ) ...and while seeing such Turned off scrren in complete Dark i can see screen on/off faintly which means process of loading is there but don't know why screeb offs
one more video...i'm not sure you can see it properly but whole track of tamplerun 2 is little bit jumpy
i'm hoping you can fix this bugs and make more smoother...you can ask cocafe for help in both of these or you can check his github for help to make UI smooth ( see master branch bcz in refresh version UI is not that smooth )
and don't abandon this kernel without fixing because it has really good potential , support this kernel as long as you can
and finally you should change default governor to smartassv2.. it's more resopnsive than dynamic , better performance and not much battery drain ... Newbies will like it more and experience user can chance if they want to use Dynamic and see difference by them self
Finally Thanks for this kernel
Click to expand...
Click to collapse
buffer overflow said:
Yes, is working but without boot animation.i chose Pegasusqplus and Sioplus. UPDATE:CRT Off animation not working even if it is checked.
Click to expand...
Click to collapse
isaak said:
Maybe you were using a custom boot animation?
Then there is no kernel support.
Click to expand...
Click to collapse
stock boot animation was working for me
yah it doesn't support CRT but i don't care. and IMO this feature is now worth to waste time
Cassiusss said:
Have you noticed that with Mk Kernel on JB, the screen seems to be a bit brighter than usual?
Click to expand...
Click to collapse
yah it's more brighter this is because you are comparing it with cocore not stock kernel ...in cococre auto brightness was lowered !
.

@PolishVodka please put something on github, or at least tell us what have you changed in the kernel, if we collaborate we could have a bugless kernel! @ChronoMonochrome can you help us to fix the errors mentioned in the op?

jineshpatel30 said:
it won't work like that in stock 4.1.2
Click to expand...
Click to collapse
This is not true.
Official Mk Kernel works with no problem on stock 4.1.2. I've used JB-4.1-stock-CoCore-cwm-6.0.3.4.boot.cpio.gz ramdisk, renamed to boot.cpio.gz and placed in the efs folder. Then installed the kernel 5.4.0 no swap.
jineshpatel30 said:
it's more brighter this is because you are comparing it with cocore not stock kernel ...in cococre auto brightness was lowered!
Click to expand...
Click to collapse
I'm comparing it with stock kernel... and it's brighter. I have no doubts.
Boot animation working for me too.
Camera opening makes the screen tearing. (on both PolishVodka and official versions)

Cassiusss said:
This is not true.
Official Mk Kernel works with no problem on stock 4.1.2. I've used JB-4.1-stock-CoCore-cwm-6.0.3.4.boot.cpio.gz ramdisk, renamed to boot.cpio.gz and placed in the efs folder. Then installed the kernel 5.4.0 no swap.
Click to expand...
Click to collapse
i was talking about 1st release by PolishVodka. not any other official build
and official versson wasn't suppose to be used with stock rom..it may work but there is chance you end up with something bad
I'm comparing it with stock kernel... and it's brighter. I have no doubts.
Boot animation working for me too.
Camera opening makes the screen tearing. (on both PolishVodka and official versions)
Click to expand...
Click to collapse
if you have no doubt then check with some brightness and illumination test app and you will see stock & this kernel have same brightness level !
Not only camera opening any rotation to screen makes it tears most of times ...
& this thread is not about official MK if you still using it have some problem then you should report it in official thread

@jineshpatel30 : How much free ram you have ?

Force said:
@jineshpatel30 : How much free ram you have ?
Click to expand...
Click to collapse
647 MB...i wrote is in OP as well
Why ?

jineshpatel30 said:
i was talking about 1st release by PolishVodka. not any other official build
Click to expand...
Click to collapse
You have answered to Reinkaros here http://forum.xda-developers.com/showpost.php?p=59215110&postcount=804 and Hastalafiesta here http://forum.xda-developers.com/showpost.php?p=59255043&postcount=821
They have suggested to use official MK Kernel but you instead have tried to use the ramdisk with the first release of PolishVodka... so that's why your phone failed to boot. First release of PolishVodka will never boot. And that's why he released a second version.
And this second version seems to be nothing else than the official Mk Kernel with included stock ramdisk and some more zram.
Both official and PolishVodka versions act the same.
Ah, and that brightness levels are the same means nothing if the screen is still brighter...
Anyway now i'm using PolishVodka version and i'll be glad to help.

jineshpatel30 said:
647 MB...i wrote is in OP as well
Why ?
Click to expand...
Click to collapse
Sorry,i didn't see it. 647mb free ram ?! I think i never had more than 320-350 free ram and now is double. That's a big change. Did you try to open 2 games or open a game and a chat app or browser? The other app in background close?

647 MB is total ram, not free ram.

I fix screen tearing and flickering in my Kernel using this commit by mkaluza. Hope it works for PolishVodka :good:
display-s6e63m0: revert "remove DDR_50_OPP requirements for screen on"

Force said:
Sorry,i didn't see it. 647mb free ram ?! I think i never had more than 320-350 free ram and now is double. That's a big change. Did you try to open 2 games or open a game and a chat app or browser? The other app in background close?
Click to expand...
Click to collapse
Oh i though you asked about how much ram is there for user to use sorry

Cassiusss said:
You have answered to Reinkaros here http://forum.xda-developers.com/showpost.php?p=59215110&postcount=804 and Hastalafiesta here http://forum.xda-developers.com/showpost.php?p=59255043&postcount=821
They have suggested to use official MK Kernel but you instead have tried to use the ramdisk with the first release of PolishVodka... so that's why your phone failed to boot. First release of PolishVodka will never boot. And that's why he released a second version.
And this second version seems to be nothing else than the official Mk Kernel with included stock ramdisk and some more zram.
Both official and PolishVodka versions act the same.
Ah, and that brightness levels are the same means nothing if the screen is still brighter...
Anyway now i'm using PolishVodka version and i'll be glad to help.
Click to expand...
Click to collapse
Gald that you ate willing to help
Zram enabled in polishvodka verson ?
I don't think so

Epirex said:
I fix screen tearing and flickering in my Kernel using this commit by mkaluza. Hope it works for PolishVodka :good:
display-s6e63m0: revert "remove DDR_50_OPP requirements for screen on"
Click to expand...
Click to collapse
@PolishVodka
Check this...

Force said:
Sorry,i didn't see it. 647mb free ram ?! I think i never had more than 320-350 free ram and now is double. That's a big change. Did you try to open 2 games or open a game and a chat app or browser? The other app in background close?
Click to expand...
Click to collapse
You got very very excited boy !!!!

You guys should check mkaluza wikis in github too . Lots of useful stuff there, especially this:
https://github.com/mkaluza/project-zen/wiki/Janice-performance-settings
and Dynamic governor related wiki:
https://github.com/mkaluza/project-zen/wiki/Dynamic-governor

Reinkaos said:
You guys should check mkaluza wikis in github too . Lots of useful stuff there, especially this:
https://github.com/mkaluza/project-zen/wiki/Janice-performance-settings
and Dynamic governor related wiki:
https://github.com/mkaluza/project-zen/wiki/Dynamic-governor
Click to expand...
Click to collapse
Added to OP

hastalafiesta said:
@ChronoMonochrome can you help us to fix the errors mentioned in the op?
Click to expand...
Click to collapse
Why asking me? I'm not a stock user and don't have janice too. Never had mentioned bugs. I can only suggest to use Interactive/ZenX to make some games lagless.
P.s. original thread of the tweak for increased RAM http://forum.xda-developers.com/gal...jb-kk-lp-ram-repartition-to-691-1-mb-t3043437 .

ChronoMonochrome said:
Why asking me? I'm not a stock user and don't have janice too. Never had mentioned bugs. I can only suggest to use Interactive/ZenX to make some games lagless.
P.s. original thread of the tweak for increased RAM http://forum.xda-developers.com/gal...jb-kk-lp-ram-repartition-to-691-1-mb-t3043437 .
Click to expand...
Click to collapse
Just because I know you have a great knowledge about kernel and so I thought about asking you.:good:

hastalafiesta said:
Just because I know you have a great knowledge about kernel and so I thought about asking you.:good:
Click to expand...
Click to collapse
Just wanted to say that mentioned bugs maybe not a kernel fault. It's difficult to advice anything especially because it's just reports about lagginess in some games. I'm not a hard gamer too. Maybe you can compare same things on various ROMs.

ChronoMonochrome said:
Just wanted to say that mentioned bugs maybe not a kernel fault. It's difficult to advice anything especially because it's just reports about lagginess in some games. I'm not a hard gamer too. Maybe you can compare same things on various ROMs.
Click to expand...
Click to collapse
Well i'm also not hard gamer..and i gave the examples where bugs was most clear
I took Dolphin browser to show screen tearing while rotation
Then COC for screen goes off during loading ( perhaps this happes in landscape apps only )
And finally TR2 to show jumpyness
But these bug weren't only in this things specifics...one can see jumpy UI in setting also , screen tearing in other apps like one person said in camera on/off
So it's not just about game and rom related bcz with same Rom and cocore any of given bugs is not there !
Anyway i didn't get any reply from PolishVodka since last build so may be he's too busy or may be this is it for this kernel !
@hastalafiesta
If you have some knowledge about kernel and you wants to continue you should start it from MK kernel Github bcz @Cassiusss was able to boot it directly on stock by boot.cipo.gz and you can ask PolishVodka if you stuck on boot , about how to fix it

Related

New weekly CM11 builds with TonyP´s sources

Hi guys. In addition to Tonyp`s thread(http://forum.xda-developers.com/showthread.php?t=2769730) I will upload weekly builds with his special sources + the newest cm11 sources.
JustArchis optimizations are included in the folder with the same name.
Feel free to check it out.
All credits goes to TonyP and Pengus who made our phone alive, but also credits to all the others, who gave their ideas and much time to the community. Special thanks to BS86, who stimulated me to start the big adventure "Building a Rom".
And last but not least thanks to JustArchi who told us how to "freshup" the code.
I am using TWRP 2.6 for my own. If you have trouble in installing try this one.
Here`s my basketbuild Folder:
https://s.basketbuild.com/devs/gucky01/P990/
Looking forward!
and what about 3.1 version??
:good:Thank You, "gucky01"!...:good:
Mhden2x said:
and what about 3.1 version??
Click to expand...
Click to collapse
M1 is 999999 times better than 3.1 so keep it like this
Thanks a lot!
All Hail M1!
metteduch said:
M1 is 999999 times better than 3.1 so keep it like this
Thanks a lot!
All Hail M1!
Click to expand...
Click to collapse
mmm disagree... actually it is a matter of taste, but on 3.1 version wifi is way more stable and quicker. At least for me!
Can you add option to swap internal and external memory like in cm 10.2 by tonyp?
4351
Mhden2x said:
mmm disagree... actually it is a matter of taste, but on 3.1 version wifi is way more stable and quicker. At least for me!
Click to expand...
Click to collapse
:good:That`s right. But I despair of the camera bug at the moment. So decided to use the M1 for my own. If this bug is fixed, I will return to 3.1.
flips13 said:
Can you add option to swap internal and external memory like in cm 10.2 by tonyp?
Click to expand...
Click to collapse
Hi Flips. I`m not a coder, but I will try it if I have some time. Perhaps another one can help us out. Last time I had contact to TonyP ist about 2 weeks ago. I think, he is the right one.
gucky01 said:
:good:That`s right. But I despair of the camera bug at the moment. So decided to use the M1 for my own. If this bug is fixed, I will return to 3.1.
Click to expand...
Click to collapse
if you mean problem with color and a coup of viewfinder, then it fixed kk modified by Fiirtecy.
Hi Flips. I`m not a coder, but I will try it if I have some time. Perhaps another one can help us out. Last time I had contact to TonyP ist about 2 weeks ago. I think, he is the right one.
Click to expand...
Click to collapse
It will be good to find instructions or something like this about how to swap it and prevent future request about it:cyclops:
P.S. Sry for my english
I installed that rom and everything seems to be just fine. Even torch app is there :good: Good job.
flips13 said:
if you mean problem with color and a coup of viewfinder, then it fixed kk modified by Fiirtecy.
Click to expand...
Click to collapse
Do you mean that upside down screen in camera is fixed in the latest Firtecy's kernel?
Not totally but almost fixed
vanko11595 said:
Do you mean that upside down screen in camera is fixed in the latest Firtecy's kernel?
Click to expand...
Click to collapse
Yes
lukino993 said:
Not totally but almost fixed
Click to expand...
Click to collapse
flips13 said:
Yes
Click to expand...
Click to collapse
Not totally or fully fixed. Let's clear that for all users to know.
Camera
Almost fixed, something like 95% fixed(at least for me);
Camera bug
Thanks guys. Thats good news! I will build a rom with 3.1 in the next days and test it. If its working well I will upload it to basketbuild.
I'm trying your build and for now no problems..congratulations
3.1 build
Ok guys. I get strange build-errors with the newest cm-sources,
Even so I managed to build a rom with the 3.1 kernel. I changed Tonyp`s frameworks/base and packages/apps/settings with the original cm-sources. So the included patches are dropped naturally!!!
You can find the rom in my basketbuild folder.
In the next days I will try to fix the issues, but I promise nothing!
My first impression of the rom is quite well, but we all have to test more....
The camera bug is nearly gone. Sometimes the picture gets upside down, but after a while its correct. I made some photos with the build-in kernel. Actually I installed Firtecy`s kernel. Thank you for your support and all credits to you!
Last: Check out this rom at your own risk! Backup your files and then format bevor installing!
Looking forward!
maybe the problem you can't build with tonyp's sources is the toarch apk?
gucky01 said:
Ok guys. I get strange build-errors with the newest cm-sources,
Even so I managed to build a rom with the 3.1 kernel. I changed Tonyp`s frameworks/base and packages/apps/settings with the original cm-sources. So the included patches are dropped naturally!!!
You can find the rom in my basketbuild folder.
In the next days I will try to fix the issues, but I promise nothing!
My first impression of the rom is quite well, but we all have to test more....
The camera bug is nearly gone. Sometimes the picture gets upside down, but after a while its correct. I made some photos with the build-in kernel. Actually I installed Firtecy`s kernel. Thank you for your support and all credits to you!
Last: Check out this rom at your own risk! Backup your files and then format bevor installing!
Looking forward!
Click to expand...
Click to collapse
I installed 3.1 rom and it is just fine. I tested camera alot but till now no upside-down picture.
I also remember that tonyp said a while ago that torch app broke building rom.
Thanks guys. Torch isnt the problem(Tony got this advice by me some weeks ago
But I could reduce the exchanging files to 4 meanwhile. So I got a big step forwards. Today I have to write an essaybut I will upload the new build in the evening.

[kernel][5.0.1][DT2W][Mako]

This is the stock kernel LRX22C but with @stratosk's Double Tap to Wake added.
Nothing else added or taken away
Only available for Nexus 4.
Only tested with stock ROM, others may not work.
Enable DT2W with Trickster Mod
Flash dt2w_boot.img in bootloader
Source:-
https://android.googlesource.com/kernel/msm
https://github.com/stratosk/kernel_msm
Toolchain:-
https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6
Built on Ubuntu 14.04.1 LTS
Good effort. I think world seems to have forgotten s2w which was my favorite! And its not available in any modern kernels ( even if listed it doesn't work). Any works on that?
arvindgr said:
Good effort. I think world seems to have forgotten s2w which was my favorite! And its not available in any modern kernels ( even if listed it doesn't work). Any works on that?
Click to expand...
Click to collapse
Thanks. I too liked @bponury's Slide to wake from Touch Control but the source isn't available anywhere. As far as I'm aware other versions of S2W had problems.
Can u also build a stock kernel but with gamma colors added only?
Would be greatful if u can have time to do that
Without DT2W or S2W only gamma colors from Faux or Franco..
_________________________________________________
Device: Google Nexus 4 (LG-E960) 16GB (MAKO)
ROM: SimpleAOSP-L-ROM (Stable Build 7)
Kernel: Stuxnet v4.5 (3.4.105)
Gapps: PA-Gapps-5.0.1-BETA4 (MINI)
________________________________________________
Sorry but I'm not a developer, it took me ages to work out how to do this so I'm unlikely to do it again for a feature I never use. Would you be interested in a tutorial thread on the process I went through?
I would totally be interested in a tutorial, from building and configuring the kernel to add the dt2w feature.
Sent from my Nexus 4 using XDA Free mobile app
Nicknoxx said:
Sorry but I'm not a developer, it took me ages to work out how to do this so I'm unlikely to do it again for a feature I never use. Would you be interested in a tutorial thread on the process I went through?
Click to expand...
Click to collapse
It would be better to use the GCC 4.7 toolchain in that case because it is more optimised and is the one used in the actual stock kernel. Also, if you need help for your guide, I can help you.
Ok I'll do a 'Guide' thread and post a link here - it will take a few days. I'll have a look at using the suggested toolchain - thanks for the offer of help - I may need it.
i flashed this kernel and result in bootloop argggggggg now i have to flash this rom again n i m going to loose all my data
is there any thing i can do with it to avoid this
EDIT - problem solved i flashed rom without wiping data but this kernel is not working for me
I've only tested it with the stock ROM, which one are you using? I'll edit the op to include this.
Nicknoxx said:
Sorry but I'm not a developer, it took me ages to work out how to do this so I'm unlikely to do it again for a feature I never use. Would you be interested in a tutorial thread on the process I went through?
Click to expand...
Click to collapse
I'm here to help you too
I faced the exact same situation that you faced while starting with the kernel. It's very very hard at first but once you get familiar with all the git, cherry-pick stuff, it will be so awesome. As @zaclimon suggested you can use the STOCK toolchain if you want to stay close to STOCK or you can use THIS toolchain(2014.12 4.9.3) and THIS COMMIT which ensures you will not run into any compile errors regarding toolchain.
Nicknoxx said:
I've only tested it with the stock ROM, which one are you using? I'll edit the op to include this.
Click to expand...
Click to collapse
Bro i m using stock 5.0.1 rom but this is not working for me
tonyking said:
Bro i m using stock 5.0.1 rom but this is not working for me
Click to expand...
Click to collapse
I can't imagine why it works fit me but not you. Do you have stock recovery or root?
Nicknoxx said:
I can't imagine why it works fit me but not you. Do you have stock recovery or root?
Click to expand...
Click to collapse
No i m using twrp recovery with root
Edit- can you make a flashable zip of this kernel
tonyking said:
No i m using twrp recovery with root
Click to expand...
Click to collapse
Hmm, the same as me.
tonyking said:
Edit- can you make a flashable zip of this kernel
Click to expand...
Click to collapse
I'll try.
Edit Schoolboy error, now fixed. Will address in upcoming guide.
The first part of my guide is here
http://forum.xda-developers.com/nexus-4/general/guide-beginners-guide-to-building-t2986686

[ROM][T211][4.4.2] Sweet Dreams V3.1

Introduction:
Hello for everybody, I'm here again . Sorry for the late . Very Merry Christmas and a Wonderful New Year to all you. Ok, I work hard on this custom rom for 2 months. I'm very happy to see a lot of features and improvements, the rom is based on Italy Firmware. Now lets start !
Warning:
Code:
- I'm not responsible for error or software brick caused on your device.
- Your warranty is void if you used the ROM.
Features:
Latest firmware
Rooted with latest Supersu Binary
Deodexed
Init.d support
Removed a lot of apps (makes boot time and improves performance)
Latest version of Busybox.
Zipaligned
Fast and Light Launcher (based on Touchwiz T210 modifed by me)
Scary scores on benchmarks
Ram managment
Battery saver tweaks
Better Scroll
Lot of improvement and upgrade of the performance on GPU
Touch render GPU
80% improvements less laggy, gagging and more performance on the whole User Interface
Dalvik runtime time reduce to open apps and games
Excellent performance on games (gta sa now can be played on max with effects max without problems)
CPU control based on scripts
Batter save memory ram (more free for your use)
Reduce boot and power off times
4-way Reboot Menu
Multi-Windows
Lot of more I may have forgot.
Note: art runtime don't work, I addict only to give small boost to remount runtime (use only if the rom take any lag,impossible hahahahahaha kidding ) .
Bugs:
None so far
Tell me if you find one
Download:
The ROM can be downloaded on this link: Sweet Dreams v1 (811MB)
Version V2 (Pre release)
https://www.androidfilehost.com/?fid=95916177934527839
Sweet Dreams V3.1
https://www.facebook.com/groups/529435540489595/
Installation:
1) Download and Save the file on any folder, it's better to save on your sd card
2) Go to your custom recovery
3) Wipe data/cache
4) Wipe system
5) Now go to your folder where you save sweet dreams v1.zip
6) Install. Wait around 10 minutes may take long time to install. When done, reboot and enjoy your sweet dreams
Changelog V3.1 Release:
Better ram free
Fix hotspot wifi
Fix issue with conflict with some script (cause issue performance)
new kernel build (I don't modify just samsung gives update), when tab 3 charge again,is more fast.
Fix some function busybox 1.20 (please don't change the version,this version is the best and don't cause any low performance,is very stable, thanks for understand)
More free GPU usage (increase performance in some games, I test gta san andreas and oddworld stranger wrath both on maximum quality and effect, I get nice fps )
Systemui and touchwiz now is more stable and fast
Rom is clean if you find some app may it don't necessary for tab 3 please tell me I will accept your suggestion*
This rom is more clean than version V1.
Add some script increase performance GC vivante 1000, (now tab 3 have nice power for high level graphics games, have funny XD)
odex rom again (temporaly 4 way reboot removed from version V2, because I need descompile policy and service to put lines with 4 way reboot,and some people know, my latop don't back for me at moment, it will back next month , if some people know add 4 way reboot with odex files, your help is very welcome for me)
I will put more language on this rom, I need remove others. Because for some test.
Sd card boost (40% more performance on I/O games )
Better stream
3g booster (10% better than last version)
New firmware,based on Indian
Battery economy optimized without reduce performance
fix time execution on archidroid (execution is better now).
This rom is pre-release V2, tell me if you find some problem or great results than version V1.
Sweet Dreams V3
Change Logs:
Deodexed Again
4 away menu add
New Latest Firmware
Fix problems with signal and call
More Clean Than ever
More Fast and Powerful
Stable Release version
Add Security Parts Kernel
Update libraries from Kernel
Better Ram manager
No Bugs, Fast than light
Sweet Dreams V3.1
Fix the problem charging offline
Add few more improvements
A little change in system files
No bugs
(the download you will find on my group from facebook, send request to participate on group, I will add you .
Spoiler Next Update for Sweet Dreams V3.2
Kernel with optimization and very strong to run many games, I begin to work on this and I get good results, but I need more time to make it more stable and better
(please note, google play and google play services will update when you put your account, if you want to install into ''system'' use link2sd to integrate than , another app if want to remove is ''samsungaccount'' the only app I can't find on pc, but it inside on ROM, use link2sd too to remove it. The is very clean, I remove a lot of Bloatware and apps)
Credits and Thanks:
Big thanks to @Nonta72, he helped me a lot . :highfive:
Thanks for @gr8nole build cwm and trwp for our tablet. :angel:
Thanks for Andy to test e send me results
If I help you give a thanks :good:
hehk1234 said:
.....
Click to expand...
Click to collapse
Good job :good:
Keep it up
Nice to see new rom for our tab!!!
Sent from my GT-N7000 using XDA Premium 4 mobile app
Silently you kept working all of this while...Well done yet to DL..just woke up
Thanks. I appreciate his praise and patience for my delay
Will it work for t210R?
sent from my SM-T210R using xda PREMIUM
rookie12 said:
Will it work for t210R?
sent from my SM-T210R using xda PREMIUM
Click to expand...
Click to collapse
No. Only for T211
hehk1234 said:
No. Only for T211
Click to expand...
Click to collapse
Ok ?
sent from my SM-T210R using xda PREMIUM
@hehk1234
i am just thinking what does it include(new)?
its size is 800mb+! why is it so big?
i have not downloaded it yet and might not be able to download it for a few days, so cant test to find it out myself,
will download it next year
sscsps said:
@hehk1234
i am just thinking what does it include(new)?
its size is 800mb+! why is it so big?
i have not downloaded it yet and might not be able to download it for a few days, so cant test to find it out myself,
will download it next year
Click to expand...
Click to collapse
Read features hehehe. 811mb big rom.... I'm accord with you, but don't worry I promisse for you this rom is very fast. I don't talk what the rom have (spoiler never e.e kkk kidding). Just test my friend and post results :fingers-crossed:
Hey folks look at my question on post. Look up and answer. I will build version V2 sweet dreams, and I need your opinions
Nice! This is a great ROM.
Hopefully we see more of sweet dreams.I dont like the sweet dreams boot screen.Could you change that in next version?
MKguy said:
Nice! This is a great ROM.
Hopefully we see more of sweet dreams.I dont like the sweet dreams boot screen.Could you change that in next version?
Click to expand...
Click to collapse
This is default bootanimation.zip. But if you don't Like you can change in your self, go to system-media-(here you will find bootanimation.zip) change with bootanimation you like and set correct permission (RW-R-R)
hy thanks for nice room..but it's have small bug at Mobile Hotspot
when i try to turn on always off again and than my tab trying to turn on again and off again
always like that,,hope you can solve this issue at new version cheerss
I think its best this rom is debloated and moved to pure android because the ram usage is ridiculous and there is just too much of a mess with that bloat crap.
You mention alot of features but I can't find the ram manager thing you mention.Is this rom already busyboxed and init.d script tweaked or Am I missing something?
Is it possible to change the status bar icons to that of lollipop.?
at least, this rom could be a solace for waiting CM11 released
I should try it tonight...
MKguy said:
I think its best this rom is debloated and moved to pure android because the ram usage is ridiculous and there is just too much of a mess with that bloat crap.
You mention alot of features but I can't find the ram manager thing you mention.Is this rom already busyboxed and init.d script tweaked or Am I missing something?
Click to expand...
Click to collapse
You missing. I don't based ram manager on init.d or build.prop, just script based team kernalize.
ethical ricado said:
Is it possible to change the status bar icons to that of lollipop.?
Click to expand...
Click to collapse
Yes, I pre patched system framework to use xposed. You can try use gravitybox. Good luck :good:
bangdes said:
at least, this rom could be a solace for waiting CM11 released
I should try it tonight...
Click to expand...
Click to collapse
You begin your build cm11 or wait for me build cm11 ? Because if I start build cm 11 for tab 3 I will take a big time because I don't have my computer at moment . But if you build cm11 I will wait bro :highfive:

[EOL] [KERNEL][G800F][exynos][CUSTOM KERNEL] FOR MOST CUSTOM ROMS [EOL]

Code:
***WARNING***
-READ CAREFULLY!!
YOU FLASH THIS KERNEL AT YOUR OWN RISK.I TAKE NO RESPONSIBILITY FOR ANY DAMAGE THAT MAY OCCUR DUE TO THE FLASHING OF THIS IMAGE.
I WILL NOT BE RESPONSIBLE FOR LOST DATA,BRICKED PHONE,OR ANYTHING OF THE SUCH.(PHONE EXPOLDES,OVERHEATS ETC)
THIS KERNEL IS ONLY FOR THE S5 MINI SM-G8OOF (Exynos) DO NOT FLASH THIS ON ANY OTHER DEVICE!
EOL (End of Life) ​
I will be creating a new thread for my N kernel - Stay tuned!​
UPDATED Linux kernel to 3.4.113 on 27-10-2016​UPDATED to v2.5 on 13-10-2016​
Code:
Changes in version 2.5
*Unlocked CPU frequencies 1500,300 and 200MHZ
*Switched to self built Linaro/Sabermod toolchain
*Added many more optimization flags
*Added DriveDroid support
Features
-Now supports Many different ROMS for the G800F
-Compiled with self built optimized Linaro/SaberMod toolchain ("LinaroMod")
-Unlocked CPU frequencies: 1500MHZ,200MHZ and 300MHZ
-Updated Linux kernel from 3.4.39 to the latest 3.4.113
-Added many optimizations (You can see all of the optimization flags in the makefile on the kernel source page)
-enabled graphite
-Added Drivedroid Support - http://softwarebakery.com/projects/drivedroid
-Fading LED's
-Added I/O schedulers
-zen
-sio
-fifo
-fiops
-tripndroid
-vr
-Added CPU governors
-zzmoove
-hyper
-alucard
-darkness
-nightmare
-wheatley
-smartassv2
-dancedance
-pegasusq
Click to expand...
Click to collapse
You will need Kernel Adiutor (free from the play store) or similar app capable of allowing you to switch I/O schedulers and
CPU governors in order to be able to change and set those.
I can recommend this.
http://forum.xda-developers.com/android/apps-games/kernel-adiutor-mod-singularity-kernel-t3333549
Click to expand...
Click to collapse
Known Issues
Let me know and I will try to fix them
Click to expand...
Click to collapse
Installation
I HIGHLY recommend that you do a full backup before flashing this kernel.I am not responsible if you lose any or all of your data.BACKUP!!
1.Download the "Spookcity_Kernel-MM"
2.Place the zip onto your phones storage
3.Reboot into recovery (Volume-Up + Home + Power button)
4.Select install
5.Flash the downloaded kernel
6.Go back a few times in TWRP.Select wipe -> Advanced wipe and wipe Dalvic/Art cache and the cache partition
If you do not do this you are very likely to experience strange issues.You have been warned.Do not report problems if you did not do this.
7.Reboot and hopefully enjoy.
Click to expand...
Click to collapse
Downloads
Spookcity_Kernel-MM
Click to expand...
Click to collapse
Sources
Toolchain - https://github.com/Spookcity/Android-Toolchains
Kernel - https://github.com/Spookcity/android_kernel_samsung_kminilte
Click to expand...
Click to collapse
Code:
CHANGELOG
[U]18-06-2017[/U]
-Switched to anykernel2
[U]31-10-2016[/U]
-Added zip for Bliss Rom
[U]13-10-2016[/U]
-Unlocked CPU freq 1500,200,300MHZ
-Switched to my self built toolchain
-Added many more optimization flags to the build
-Added DriveDroid support
-Added zip for Zephyr-OS
[U]24-07-2016[/U]
- Added zips to support more custom ROMS
[U]V2 - 23-07-2016[/U]
-Fixed RAMDISK to make it compatible and actually work with newer builds of CM13
-Changed SELinux from disabled to permissive to be in line with the "stock" CM kernel
-Added I/O schedulers
-fiops
-tripndroid
-vr
-Added CPU governors
-pegasusq
[U]V1 - Initial Release[/U]
Thanks to
-hennymcc and CTXz for bringing CM13 to our device! I used their kernel sources to build this.Without them I never would have been able to attemp this.
-DJ_Steve for his custom kernel.Without being able to look at his sources and cherry-pick some things I would also not have been able to do this.
-CurtisMJ Ditto same thing here.His kernel build and sources were very helpful to me.
-frap129 for his amazing toolchains!
-ArchiDroid
Anyone I may have left out sorry.I appreciate you all!
Click to expand...
Click to collapse
I hope you enjoy and please say thanks if you find this at all useful
XDA:DevDB Information
Spookcity_Kernel, Kernel for the Samsung Galaxy S5 Mini
Contributors
spookcity138
Kernel Special Features:
Version Information
Status: Beta
Created 2016-05-26
Last Updated 2017-06-18
Nice, finally some new development for our phone =)
I will test the kernel right away...
One thing that I would really love would be if you have the time to look into adding DT2W :angel:
Thanks for your work so far :good:
*edit*
booting went well. However WiFi doesnt work for me :/ I uploaded the logcat-output filtered for "wifi" to hastebin. If you need anything else for debugging let me know. Thanks to dual boot I will keep your custom kernel on one ROM
log
zaworka said:
Nice, finally some new development for our phone =)
I will test the kernel right away...
One thing that I would really love would be if you have the time to look into adding DT2W :angel:
Thanks for your work so far :good:
*edit*
booting went well. However WiFi doesnt work for me :/ I uploaded the logcat-output filtered for "wifi" to hastebin. If you need anything else for debugging let me know. Thanks to dual boot I will keep your custom kernel on one ROM
log
Click to expand...
Click to collapse
Thanks for trying out the kernel. That's weird about the WiFi. I have never had that happen in the bunch of times I have flashed it. I will def look into it.I'll have a look at the log, although at this point I'm also not that great at interpreting those, so it may not help. I'll see what I can do though
Sent from my SM-G800F using Tapatalk
can you tell me someone what is kernel?
br3acker said:
can you tell me someone what is kernel?
Click to expand...
Click to collapse
http://www.makeuseof.com/tag/linux-kernel-explanation-laymans-terms/
zaworka said:
Nice, finally some new development for our phone =)
I will test the kernel right away...
One thing that I would really love would be if you have the time to look into adding DT2W :angel:
Thanks for your work so far :good:
*edit*
booting went well. However WiFi doesnt work for me :/ I uploaded the logcat-output filtered for "wifi" to hastebin. If you need anything else for debugging let me know. Thanks to dual boot I will keep your custom kernel on one ROM
log
Click to expand...
Click to collapse
OK,well after looking at the log and trying to decipher it and then thinking a bit I have only come up with one possibility.Maybe somehow your wpa_supplicant.conf file located in /data/misc/wifi/wpa_supplicant.conf has the wrong permissions for some reason.If you want you could try to check and possibly change the permissions.If you decide to try this I would backup the file because you never know.
The permissions should be: Owner - wifi Group - wifi...
Owner read and write/Group read and write/ others none.
If your permissions are correct on that file the only other thing I could possibly think of to do if you wanted would be to delete that file,wpa_supplicant.conf.Only after you back it up it though because you will lose all of your passwords,and reboot.It should recreate it.Do that at your own risk though.This is all I have come up with because I have never had that problem,so it's a bit difficult.
I am sorry, I think the error was my fault and not a bug of the kernel. I think the build that I am running at the moment is one I build myself and used sabermod toolchain. I remembered that I had the same problem using DMPKernel on that build. I thought I was using one of hennymmc's builds by now - so, sorry for reporting but thanks for looking into anyways.
Unfortunately I tried both and didnt solve the issue ,the permissions were set correctly btw.
I just installed the CM13 on another partition but - unless I have a flashable zip file - I can not install your kernel on that one. Would it be possible to provide the kernel as .zip?
zaworka said:
I am sorry, I think the error was my fault and not a bug of the kernel. I think the build that I am running at the moment is one I build myself and used sabermod toolchain. I remembered that I had the same problem using DMPKernel on that build. I thought I was using one of hennymmc's builds by now - so, sorry for reporting but thanks for looking into anyways.
Unfortunately I tried both and didnt solve the issue ,the permissions were set correctly btw.
I just installed the CM13 on another partition but - unless I have a flashable zip file - I can not install your kernel on that one. Would it be possible to provide the kernel as .zip?
Click to expand...
Click to collapse
Sure thing.I updated the download section above and added a flashable zip.I think it'll work.
spookcity138 said:
Sure thing.I updated the download section above and added a flashable zip.I think it'll work.
Click to expand...
Click to collapse
Nice, that worked! Thanks for the effort :good:
Will test it over the next few days :fingers-crossed:
zaworka said:
Nice, that worked! Thanks for the effort :good:
Will test it over the next few days :fingers-crossed:
Click to expand...
Click to collapse
Good,I'm glad that worked.You thoughts and feedback are most welcomed.
Any chance this kernel hits the G800H for cm 13 too ?
I can be your tester
sasukesama said:
Any chance this kernel hits the G800H for cm 13 too ?
I can be your tester
Click to expand...
Click to collapse
Hey, I appreciate the offer. That is something I can look into at some point. No promises. In still trying to learn all of this stuff.
Sent from my SM-G800F using Tapatalk
spookcity138 said:
Hey, I appreciate the offer. That is something I can look into at some point. No promises. In still trying to learn all of this stuff.
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Sounds good
I think you can do the same (using the cm13 kernel and DJ_Steve kernel stuff) as he has a G800H version of his kernel
I use your kernel , you can repair the wifi ?
Abde77 said:
I use your kernel , you can repair the wifi ?
Click to expand...
Click to collapse
What's the problem with the WiFi exactly? I need to update this anyway. I will at some point.I've had no WiFi probs though.
Sent from my SM-G800F using Tapatalk
spookcity138 said:
What's the problem with the WiFi exactly? I need to update this anyway. I will at some point.I've had no WiFi probs though.
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Conducted any work on the development of the kernel? About sound problems and headphones like DJ_Steve , initially had no problems, and then there., maybe it depends on kernel version? Is there a chance to make all the improvements in version 3.4.39 ? (Google translation)
Oleggluk said:
Conducted any work on the development of the kernel? About sound problems and headphones like DJ_Steve , initially had no problems, and then there., maybe it depends on kernel version? Is there a chance to make all the improvements in version 3.4.39 ? (Google translation)
Click to expand...
Click to collapse
I actually haven't touched this recently at all.I've been spending too much time on the mess that is my AOSP build [emoji2]
I give up on that for now though.It's giving me a headache.
I will try to get back to this soon,as I don't even think it works with any of my builds.I don't know.I'm not even using this right now.
I never actually had any real audio issues with this however and I did use if for awhile,so that's strange.
Sent from my SM-G800F using Tapatalk
spookcity138 said:
I actually haven't touched this recently at all.I've been spending too much time on the mess that is my AOSP build [emoji2]
I give up on that for now though.It's giving me a headache.
I will try to get back to this soon,as I don't even think it works with any of my builds.I don't know.I'm not even using this right now.
I never actually had any real audio issues with this however and I did use if for awhile,so that's strange.
Click to expand...
Click to collapse
Also does not have wi-fi access in the new Assembly СМ13 from ayke with this kernel. I took apart your kernel and replace the ramdisk from the new build, wifi now works. (Google translation)
Oleggluk said:
Also does not have wi-fi access in the new Assembly СМ13 from ayke with this kernel. I took apart your kernel and replace the ramdisk from the new build, wifi now works. (Google translation)
Click to expand...
Click to collapse
I kinda remember this issue as well.Good to know about the ramdisk.
Its such a strange thing how only some experience the robotic voice...and you have no microphone problems with ayke's build either? Like it stops working after a phone call?
Sent from my SM-G800F using Tapatalk
spookcity138 said:
I kinda remember this issue as well.Good to know about the ramdisk.
Its such a strange thing how only some experience the robotic voice...and you have no microphone problems with ayke's build either? Like it stops working after a phone call?
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Robot voice I have never had. And mute has the same problem that error camera. If you kill the mediaserver, the microphone performance is restored. You can use the long-known app Mediaserver Killer. (Google translation)

[KERNEL][FORK] Illusion X/Kernel from namelessAOSP

Made a new kernel forked from the stock nameless kernel and I got really good benchmark scores. For banking apps download universal safety fix and then hide all your banking apps and your apps that don't work with root this kernel comes with root but when you get into magisk manager you can unroot your device I WILL NOT BE RESPONSIBLE FOR A BRICKED PHONE! if you say anything like "THIS GUY FRICKED MY PHONE" i will laugh at you Source code: https://github.com/Gavin123-code/kernel_oneplus_sm8250 Credits The Nameless-AOSP team and The Illusion-X Devs. happy flashing!
GbnrVR said:
Made a new kernel forked from the stock nameless kernel and I got really good benchmark scores
Click to expand...
Click to collapse
Overclocked to 4250Mhz and I got good battery life like 16 hours (THIS US ONLY TESTED ON NAMELESS) it should work on other roms but just saying and ANDROID 12 only I'll try to keep it updated with nameless updates but updates will stop when they switch kernel if they do. CREDITS: Nameless AOSP Maintainer For the 8T and the IllusionX team
GbnrVR said:
Overclocked to 4250Mhz and I got good battery life like 16 hours (THIS US ONLY TESTED ON NAMELESS) it should work on other roms but just saying and ANDROID 12 only I'll try to keep it updated with nameless updates but updates will stop when they switch kernel if they do. CREDITS: Nameless AOSP Maintainer For the 8T and the IllusionX team
Click to expand...
Click to collapse
Download
96 MB file on MEGA
mega.nz
I AM NOT RESPONSIBLE FOR A BRICKED DEVICE
Will this fix for the qualcomm crash dump problem I understand the original version seem to have problems with?
badadam said:
Will this fix for the qualcomm crash dump problem I understand the original version seem to have problems with?
Click to expand...
Click to collapse
I don't know I haven't experienced those problems
You can try
GbnrVR said:
You can try
Click to expand...
Click to collapse
Also this is incompatible with the OnePlus 9R
GbnrVR said:
You can try
Click to expand...
Click to collapse
OK, I´ll give it a try and see how it goes.
Flashed it and now my banking apps are not working. Detected as rooted....
badadam said:
Flashed it and now my banking apps are not working. Detected as rooted....
Click to expand...
Click to collapse
Use universal safety net fix and hide the banking apps
GbnrVR said:
Use universal safety net fix and hide the banking apps
Click to expand...
Click to collapse
I´m not rooted so I´ll just see if a dirty flash can bring it back.
badadam said:
I´m not rooted so I´ll just see if a dirty flash can bring it back.
Click to expand...
Click to collapse
I thought you said detected as rooted because this kernel is prerooted and with magisk Manager you can unroot
You need to post your source. Also you should really provide more info in the OP, especially since it's already patched with magisk supposedly...
Thanks for the build .
Can you post the source please ?
Have you modified illusion X ? If so what features?
Would be great to have more cpu governor's / TCP algorithms and I/O schedulers . As well as under clocking CPU and GPU
Looking forward to upcoming releases .
UPDATE ** Experiencing extreme lag when switching between apps .
GPU has -44mhz - 800mhz clock speeds , perhaps -44hz is the issue?
Your on the right track , great to see fresh kernel ( fork )
azoller1 said:
You need to post your source. Also you should really provide more info in the OP, especially since it's already patched with magisk supposedly...
Click to expand...
Click to collapse
Fun fact this comes from nameless so you can look at the nameless kernel sources
GbnrVR said:
Fun fact this comes from nameless so you can look at the nameless kernel sources
Click to expand...
Click to collapse
Oh I get what you mean since it's like overclocked and stuff
hightech316 said:
Thanks for the build .
Can you post the source please ?
Have you modified illusion X ? If so what features?
Would be great to have more cpu governor's / TCP algorithms and I/O schedulers . As well as under clocking CPU and GPU
Looking forward to upcoming releases .
UPDATE ** Experiencing extreme lag when switching between apps .
GPU has -44mhz - 800mhz clock speeds , perhaps -44hz is the issue?
Your on the right track , great to see fresh kernel ( fo
Click to expand...
Click to collapse
hightech316 said:
Thanks for the build .
Can you post the source please ?
Have you modified illusion X ? If so what features?
Would be great to have more cpu governor's / TCP algorithms and I/O schedulers . As well as under clocking CPU and GPU
Looking forward to upcoming releases .
UPDATE ** Experiencing extreme lag when switching between apps .
GPU has -44mhz - 800mhz clock speeds , perhaps -44hz is the issue?
Your on the right track , great to see fresh kernel ( fork )
Click to expand...
Click to collapse
Modded IllX And -44Mhz is a glitch because somehow android cant handle so 4250Mhz also thank you for the nice messages ill figure out how to get the sources so i hope XDA doesnt delete this
GbnrVR said:
Modded IllX And -44Mhz is a glitch because somehow android cant handle so 4250Mhz also thank you for the nice messages ill figure out how to get the sources so i hope XDA doesnt delete this
Click to expand...
Click to collapse
also question can anyone help me decompile a kernel im on windows and i am stuck

Categories

Resources