I keep getting the same error message again and again and I don't know where it comes from. I found a post of another user using a ROM that got the same issue. I'm using the original ROM which the phone came with.
The message says:
Unable to load library : Problem during installation !
Please uninstall then install again the application.
Click to expand...
Click to collapse
Click here to see the screenshot
You can repair using pc companion or flash stock firmware of your phone using flashtool after backing up your data to get permanent solution for your problems..
I download and keep stock ftf for my phone and flash it when any problem occurs...
Related
So I tried to install cm7.1 on my x8. I successfully rooted and installed a unlocked bootloader, went to flash cm but got an assert error, so I edited some sort of XML file to remove the assert bit (found it on a post here). Till here CM installed fine but when I hit the reboot CWM gave an error "Current recovery seems bad", I sort of ignored that error and rebooted just the same but now it's stuck at the "Sony Ericsson" screen.
I have tried to re-lock the bootloader using flastool but seems I did not manage as the "Running" line still says RUNNING S1_EROM VER "r8A029", from the logs s1tool created I can see that this line has never actually changed!!!!
I've also tried to use PCC but when I try to repair it says that there are no updates for my device.
Anyone has any ideas what I can do?
fencer said:
I've also tried to use PCC but when I try to repair it says that there are no updates for my device.
Anyone has any ideas what I can do?
Click to expand...
Click to collapse
You need to flash back to Stock by using Flashtool.
Search the X8 Q&A and X8 General board - there having been gazillions of threads about "how do I restore stock with Flashtool" ... there's at least one each day...
fencer said:
So I tried to install cm7.1 on my x8. I successfully rooted and installed a unlocked bootloader, went to flash cm but got an assert error, so I edited some sort of XML file to remove the assert bit (found it on a post here). Till here CM installed fine but when I hit the reboot CWM gave an error "Current recovery seems bad", I sort of ignored that error and rebooted just the same but now it's stuck at the "Sony Ericsson" screen.
I have tried to re-lock the bootloader using flastool but seems I did not manage as the "Running" line still says RUNNING S1_EROM VER "r8A029", from the logs s1tool created I can see that this line has never actually changed!!!!
I've also tried to use PCC but when I try to repair it says that there are no updates for my device.
Anyone has any ideas what I can do?
Click to expand...
Click to collapse
An other workaround, is to flash with a lower version of stock ROM with flash tool, say 1.6 donut rom, then use PCC to repair and update your phone, to the lastest 2.1 Stock Rom. From there, you can flash whatever Roms you want!
I managed to unbrick it with flashtool ... turns out I was flashing the wrong stuff!! It was hard to find the rom (especially when it's 2am) but in the end I found one here:
http://mkasharingiscaring.blogspot.com/2011/11/guide-how-to-unbrick-xperia-x8-d.html
Thanks all for the help!
I accidentally wiped my stock ROM from my Xperia Z using TWRP recovery and have not other ROM to boot into.
My phone currently just stays on the 'SONY' screen and doesn't go anywhere from there. I downloaded the stock firmware for my phone and am unsure what to do with it. Help please:crying:
74dp013 said:
I accidentally wiped my stock ROM from my Xperia Z using TWRP recovery and have not other ROM to boot into.
My phone currently just stays on the 'SONY' screen and doesn't go anywhere from there. I downloaded the stock firmware for my phone and am unsure what to do with it. Help please:crying:
Click to expand...
Click to collapse
Follow this guide
http://forum.xda-developers.com/showthread.php?t=2240614
Hope that help.
74dp013 said:
I accidentally wiped my stock ROM from my Xperia Z using TWRP recovery and have not other ROM to boot into.
My phone currently just stays on the 'SONY' screen and doesn't go anywhere from there. I downloaded the stock firmware for my phone and am unsure what to do with it. Help please:crying:
Click to expand...
Click to collapse
If you are getting confused with flash tool...... Download sony sus... U need a reliable internet connection and u will be back to stock... It will take about half n hour... Be patient... Reply if didnt work......
UnLucky12 said:
Follow this guide
http://forum.xda-developers.com/showthread.php?t=2240614
Hope that help.
Click to expand...
Click to collapse
I had a go but it says "ERROR - error flashing"
74dp013 said:
I had a go but it says "ERROR - error flashing"
Click to expand...
Click to collapse
Reread and try again, which shouldn't need prompting.
Sent from my C6603 using xda premium
riflesnroses said:
If you are getting confused with flash tool...... Download sony sus... U need a reliable internet connection and u will be back to stock... It will take about half n hour... Be patient... Reply if didnt work......
Click to expand...
Click to collapse
I also tried SUS but it refuses to update saying that due to the phone having modified firmware.
XperienceD said:
Reread and try again, which shouldn't need prompting.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
I keep trying but it comes up with the same error message
74dp013 said:
I keep trying but it comes up with the same error message
Click to expand...
Click to collapse
I used to have the same issue last week and I finally succeed respecting the step by step from Androxyde.
One Advice : Try to redownload the FTF fiel or try another one (from another country).
I personnaly had succeess using the FTF from UK (and I am from another country) and no issue at all.
Good luck :fingers-crossed:
74dp013 said:
I keep trying but it comes up with the same error message
Click to expand...
Click to collapse
Then you're obviously doing something wrong or missed a step from the picture tutorial.
74dp013 said:
I also tried SUS but it refuses to update saying that due to the phone having modified firmware.
Click to expand...
Click to collapse
Ok i will post a video tommarow...... Just make sure u download a genuine ftf and check md5 sum after downloading u can find md5 checker on google
XZ
XZ stock rom wiped. Everytime i switch on the phone, it gets stuck in sony logo, i have TWRP installed, but everytime i hit reboot and select power off it asks to install superuser su so that it can be rooted, but i already had rooted the phone. i tried doing this http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614 but it still did NOT WORK! pleeeeeeeeease help. i have no problem with losing data.
shravansom said:
XZ stock rom wiped. Everytime i switch on the phone, it gets stuck in sony logo, i have TWRP installed, but everytime i hit reboot and select power off it asks to install superuser su so that it can be rooted, but i already had rooted the phone. i tried doing this http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614 but it still did NOT WORK! pleeeeeeeeease help. i have no problem with losing data.
Click to expand...
Click to collapse
Check PM
what is PM?
Post-mortem
Hi, recently performed a full wipe on my One, flashed latest Viper One RC1 rom and have lost root. I've downloaded and attempted to flash the supersu zip as instructed that's provided in the ROM thread, but TWRP gives me a failed message.
Am I doing something stupid here? :/
Thanks in advance.
Any ideas?
Which error?
Probably is a bad download of the zip.
Because the zip is working fine here
Guich said:
Which error?
Probably is a bad download of the zip.
Because the zip is working fine here
Click to expand...
Click to collapse
Thanks for the reply.
Downloaded it twice (can't provide link due to new user restriction, but it's linked to on page 1082 of the Viper One thread)
This is what I get in TWRP after attempted to install zip:-
Updating partition details...
E:Unable to open zip file.
Error flashing zip '/sdcard/Download/UPDATE-Sup(etc...)
Failed.
senjiroh said:
Thanks for the reply.
Downloaded it twice (can't provide link due to new user restriction, but it's linked to on page 1082 of the Viper One thread)
This is what I get in TWRP after attempted to install zip:-
Updating partition details...
E:Unable to open zip file.
Error flashing zip '/sdcard/Download/UPDATE-Sup(etc...)
Failed.
Click to expand...
Click to collapse
Download this, and try.
Working fine here.
That was the link that I used.
However, for some reason, downloading it on my PC then transferring it over to my phone rather than downloading directly on the phone seems to have made all the difference and now it's happy. :good:
Any idea why that would matter?
senjiroh said:
That was the link that I used.
However, for some reason, downloading it on my PC then transferring it over to my phone rather than downloading directly on the phone seems to have made all the difference and now it's happy. :good:
Any idea why that would matter?
Click to expand...
Click to collapse
Probably was a bad download
senjiroh said:
That was the link that I used.
However, for some reason, downloading it on my PC then transferring it over to my phone rather than downloading directly on the phone seems to have made all the difference and now it's happy. :good:
Any idea why that would matter?
Click to expand...
Click to collapse
I had the same issue. Dowloading with phone gives you a 5ko file instead of a 0.98Mo one...
Hi There ! I Have got A Sony Xperia Sp,C3503,and 4.2,build 2.254,With a rooted locked bootloader, i have downloaded the new custom Rom " existenz_ultra_1.3.7 "
But At the Cwm when i want to install it from External Sd Card,it gives me this Error :
- Getting Update
-oppening package
- installation aborted
i tried th Rom Manager,also the same error massage,
Cn Anybody Help me Plz ?!
What error did it gave?
There are some errors that show up when installing. Perhaps you can share them here to determine extra informatie.
existenz_ultra_1.3.7 ITS NOT A ROM, JUST AN UPDATE.
To flash the update you need to flash the base ROM first and reinstall the recovery if you are on a locked bootloader, then you can flash the update.
reply
mrjraider said:
What error did it gave?
There are some errors that show up when installing. Perhaps you can share them here to determine extra informatie.
Click to expand...
Click to collapse
that is all i informed you,no more comments on cwm,
rply
cachanilla86 said:
existenz_ultra_1.3.7 ITS NOT A ROM, JUST AN UPDATE.
To flash the update you need to flash the base ROM first and reinstall the recovery if you are on a locked bootloader, then you can flash the update.
Click to expand...
Click to collapse
hey i got it !! ThankS so much dude !
cachanilla86 said:
existenz_ultra_1.3.7 ITS NOT A ROM, JUST AN UPDATE.
To flash the update you need to flash the base ROM first and reinstall the recovery if you are on a locked bootloader, then you can flash the update.
Click to expand...
Click to collapse
Thanks to cachanilla86 for giving the shortest way to solve the problem
xda guys rocks!!!
hello guys, I checked this error on flash tool ... I have to do to fix it? I can not put a stock firmware! ......."Error in processHeader : 995" ....Missing the kernel? please help
Icewriter said:
hello guys, I checked this error on flash tool ... I have to do to fix it? I can not put a stock firmware! ......."Error in processHeader : 995" ....Missing the kernel? please help
Click to expand...
Click to collapse
What rom are you using and which firmware did you want to flash?
Hello,
I got the same problem (just different phone).
I am using CM11 and need to go back to stock ROM. So I tried to flash TFT via flash mode, but it ends on this error.
I tried to change compatibility to Vista and run flashtool as admin, but it doesn't help for me. I am using Flashtool 0.9.14.0 on Windows 7 64b.
Any idea?
Mesiahcz said:
Hello,
I got the same problem (just different phone).
I am using CM11 and need to go back to stock ROM. So I tried to flash TFT via flash mode, but it ends on this error.
I tried to change compatibility to Vista and run flashtool as admin, but it doesn't help for me. I am using Flashtool 0.9.14.0 on Windows 7 64b.
Any idea?
Click to expand...
Click to collapse
Redownload the ftf file
respawn
harrymason37 said:
Redownload the ftf file
respawn
Click to expand...
Click to collapse
Flashtool reinstalled, drivers reinstalled, but I think, that the problem was at TFT. Thank you!
Mesiahcz said:
Flashtool reinstalled, drivers reinstalled, but I think, that the problem was at TFT. Thank you!
Click to expand...
Click to collapse
sorry for reopening. But i can confirm his method.
Had exactly same problem as threadstarter. In the end it was a corrupted ftf that was making the header error..
I have same problem after try to format SdcArd0(more then2Go). tuto : [HOW-TO][ROOT][4NOOBS] Resize sdcard0 and internal storage to maximize space for apps
The lt30p, loop within logo Sony and flashmode
After 5 day, to try everything... :s
(flashtool disconnect the phone)...
No flastboot ...
No battery and impossibility to Charging (Looping)
The Solution is OLD Flashtool.
9.18.6 at ww w . flashtool.net/ downloads_windows_prev.php
After reinstalled the old flashtool ,disconnect internal battery.
Update TFT file and GO!
i can update every TFT. Because in 9.22.3, you don't chose TFT.
No error 995. no system.sin corrupt etc..