Database Develop

HTC Butterfly S 9060 easy unlock bootloader(no need of htcDev)

hey gus i have unlocked my 9060 by this method and its pretty easy(Thanks to its creators).........and the best part is that u dont have lose any data from ur phone .................(ur device must be S-off)
this method is imported from my old phone desire 601 ..........credit:
@scotty1223 thanks
u just have to do this .......
first go to this site and do as he say...... and install the adb to ur pc.........credit goes to @Snoop05
and then just open this (adb.zip) and download it ......
extract it to short path like:--- C:\.
now open the command prompt where u have extracted (press the left shift in that extracted folder and right click and click open command prompt) or locate to the folder
Now u just have to unlock ......
type adb shell (in the command prompt)
type su
type or paste echo -ne "HTCU" | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
****i advice copy and past****
type exit
type exit
type adb reboot bootloader (for checking its position *****unlocked***** )
type fastboot reboot ( to back in os)

hey @rajat ,can u give me the stock systemUI.apk 4.2.2 9060 ,,,,,it's urgent....thanks in advance

thanks for the new method. can i try this with my htc one m7?

goodman_east said:
thanks for the new method. can i try this with my htc one m7?
Click to expand...
Click to collapse
u can but u have to change this line only the main code.........................
echo -ne "HTCU" | dd of=/dev/block/mmcblk0p2 bs=1 seek=33796
cause m7 memory partition is different from zara
else is same .............and btw what m7 u have is it china 802t.............

Good
goodman_east said:
thanks for the new method. can i try this with my htc one m7?
Click to expand...
Click to collapse
Great job

rajat836 said:
hey gus i have unlocked my 9060 by this method and its pretty easy(Thanks to its creators).........and the best part is that u dont have lose any data from ur phone .................(ur device must be S-off)
this method is imported from my old phone desire 601 ..........credit:
@scotty1223 thanks
u just have to do this .......
first go to this site and do as he say...... and install the adb to ur pc.........credit goes to @Snoop05
and then just open this (adb.zip) and download it ......
extract it to short path like:--- C:\.
now open the command prompt where u have extracted (press the left shift in that extracted folder and right click and click open command prompt) or locate to the folder
Now u just have to unlock ......
type adb shell (in the command prompt)
type su
type or paste echo -ne "HTCU" | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
****i advice copy and past****
type exit
type exit
type adb reboot bootloader (for checking its position *****unlocked***** )
type fastboot reboot ( to back in os)
Click to expand...
Click to collapse
What is the use unlock ?
How I can make the S - OFF?
Thanks for the input.

TRYING TO UNLOCK THE MOTO X 2ND GEN

CAN SOMEONE PLEASE HELP US?? WE ARE TRYING TO UNLOCK THE MOTO X 2ND GEN FROM US CELLULAR AND NEED THESE FILES!
THANKS IN ADVANCE!
PLEASE POST THEM TO : http://forum.xda-developers.com/moto-x-2014/help/xt1093-cellular-gsm-network-t2952620/page12
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
maybe if somebody shere modemst1 and modemst2 from unlocked moto x 2014 files and we flashe it will help
i can take the risk and flesh it to my device
how to backup this file
run terminal emulator
su ( enter )
dd if=/dev/block/platform/msm_sdcc.1/by-name/modemst1 of=/sdcard/modemst1.img ( enter )
dd if=/dev/block/platform/msm_sdcc.1/by-name/modemst2 of=/sdcard/modemst2.img ( enter )
someone can do it for us ?

help help , i need a boot.img by XT1115 (moto X Pro)

i flash a wrong boot.img into it .
so it was failed to start-up and stay in fastboot mode now
i only know the boot block in nexus 6 is mmcblk0p37
su -c ls -la /dev/block/platform/msm_sdcc.1/by-name |grep boot
lrwxrwxrwx root root 1970-01-01 08:00 boot -> /dev/block/mmcblk0p37​
i dont know it is match or not in moto x pro . so u need try it
"su -c ls -la /dev/block/platform/msm_sdcc.1/by-name |grep boot"
and get the right mmc block num.
and backup it to me ,like this :
su -c dd if=/dev/block/mmcblk0p37 of=/sdcard/boot.img bs=4096​
very very thank you

Why are you posting this in the Nexus 6 forums?

brando56894 said:
Why are you posting this in the Nexus 6 forums?
Click to expand...
Click to collapse
cuz they r the same hardware based..and not any other X pro forums..

[Q] Unbrick Moto X 2014 - I need Lollipop 5.1 extracted Files to try!

Someone who has the moto x (XT1097) updated on the lollipop 5.1 could extract the files through the attached procedure?
I would like to try the procedure below:
http://forum.xda-developers.com/showpost.php?p=60224688&postcount=415
Thanks!

OznerCall said:
Someone who has the moto x (XT1097) updated on the lollipop 5.1 could extract the files through the attached procedure?
I would like to try the procedure below:
http://forum.xda-developers.com/showpost.php?p=60224688&postcount=415
Thanks!
Click to expand...
Click to collapse
i can extract from my phone and share the files with anyone, no probs with that

tramuyo said:
i can extract from my phone and share the files with anyone, no probs with that
Click to expand...
Click to collapse
that would be great, i need to unbrick my phone too

Those files won't work. Those are for the first gen moto x. We have a different processor in the second gen.
Sent from my XT1095

But from our phone, with a similar procedure

haanzj said:
But from our phone, with a similar procedure
Click to expand...
Click to collapse
Won't work. We need the moto x gen 2 files. Until we have them this procedure won't work. We have to wait until they are leaked.
The only reason this works on the first gen is because the files needed were leaked from motorola. Unfortunately we still don't have the files for the second gen yet, so we must wait.
Sent from my XT1095

I just looked in the bat file, don't use it!
It copies your imei info!
Sent from my XT1095

Oops. So don't do this

adb shell su -c "dd if=/dev/block/mmcblk0 of=/sdcard/partitions.mbn bs=6144 count=1"
adb shell su -c "dd if=/dev/block/mmcblk0 of=/sdcard/pt.bin bs=1024 count=10"
adb shell su -c "dd if=/dev/block/mmcblk0p2 of=/sdcard/sbl1.mbn"
adb shell su -c "dd if=/dev/block/mmcblk0p3 of=/sdcard/sbl2.mbn"
adb shell su -c "dd if=/dev/block/mmcblk0p4 of=/sdcard/sbl3.mbn"
adb shell su -c "dd if=/dev/block/mmcblk0p5 of=/sdcard/aboot.mbn"
adb shell su -c "dd if=/dev/block/mmcblk0p6 of=/sdcard/rpm.mbn"
adb shell su -c "dd if=/dev/block/mmcblk0p7 of=/sdcard/tz.mbn"
Click to expand...
Click to collapse
What about that?

haanzj said:
What about that?
Click to expand...
Click to collapse
Those ones are fine, it is the one that says pds that has imei info in it.
Sent from my XT1095

How to unlock bootloader on d405n v20a ?

Hi !
Didn't find the correct aboot.bin file for my device... Anyone help ?
My phone is already rooted...
Is there a way to manually dump the bootloader and patch it ?
Thanks,
Bruno.

Dump your aboot with:
Code:
dd if=/dev/block/platform/msm_sdcc.1/by-name/aboot of=/storage/external_SD/aboot.img
And post here.

F. Gacrux said:
Dump your aboot with:
Code:
dd if=/dev/block/platform/msm_sdcc.1/by-name/aboot of=/storage/external_SD/aboot.img
And post here.
Click to expand...
Click to collapse
I've just found it here : http://forum.xda-developers.com/showpost.php?p=54358527&postcount=2
Worked for me on a d405n v20a-eur firmware. Happy