Hi guys,
I have a big problem. recently I had a soft brick in my celphone
I tried to make a factory reset from fastboot menu, but it did work.
then I tried using RSD lite, something went wrong and the process was interrupted, now when I try to turn on my device or enter to fastboot, no image is displayed, there no image and no fastboot option, totally died.
Do you know if this has a fix?
thanks for your help, and sorry, my english is not very good.
http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
Related
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Vaizen said:
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Click to expand...
Click to collapse
your secure level was to high for a non bootloader method and if you done a method with a unlocked bootloader and your bootloader was locked thats bad.
unlock your bootloader >>WARRANTY VOID<< install cwm and use any backup. or flash the 39 gb fw but i think you have yet to unlokc the bootloader to safe it.. and be patient dont try to much stuff if your battery goes low you need a factory adapter or something like this to charge ur razr i if the battery is down.
regards hope you get it waorking again
I solved my problem this way
Vaizen said:
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Click to expand...
Click to collapse
Hello good morning
I brick 2 phones trying to get one of them and in the process did fail at 2, how the recovery?
1. - Use RSD Lite version 6.1.4
2. - Use 1 extra phone (htc wildfire root and backup CWMR in case of failure)
3. - Use a GB retail rom (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml)
4. - The phone to unbrick, put fastboot mode, switching on via the power button and vol (-) until the fastboot mode screen read "fastboot reason:" if it does not, re-try until there is
5. should not say "fastboot reason: flash failure, or anything else xxxxxx xxxx xxxxx ............"
6. - Boot rsd lite 6.1.4, select retail rom, and indicate that only "unzip" connects your motorola razr I, and it connects back to the other phone (in my case htc wildfire), which has a debug mode enabled.
7. - Note, that in the window of the Rsd Lite in row 1, the Razr I phone is detected, then you start flashing in RSD Lite 6.1.4, see screenshot of your razr I to see that data is being sent, (the other phone should not be affected and only serves as a decoy to usb drivers, Rsd lite at least do not damage to my phone)
8. - Remember flashing erase the card was in your internal Razr I therefore will lose programs, photos or music you had or downloaded to the SD or internal virtual
9. - Flashing can stop and have to do everything again, but remember that no fastboot mode screen should read:
"fastboot reason: flash failure or otherwise else xxxxxx xxxxxxx ......." must be clean that is just:
"fastboot reason: "
luck : Good:
Warning, do not take responsibility for any damage to your cell involved in the process, ......... the lure of the phone can be found on youtube and just suits the way because of my need to get my phone ........ in no way am programmer or software developer, for which only comment what turned out ok to me
excuse my bad English
jacbarahona72 said:
Hello good morning
I brick 2 phones trying to get one of them and in the process did fail at 2, how the recovery?
1. - Use RSD Lite version 6.1.4
2. - Use 1 extra phone (htc wildfire root and backup CWMR in case of failure)
3. - Use a GB retail rom (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml)
4. - The phone to unbrick, put fastboot mode, switching on via the power button and vol (-) until the fastboot mode screen read "fastboot reason:" if it does not, re-try until there is
5. should not say "fastboot reason: flash failure, or anything else xxxxxx xxxx xxxxx ............"
6. - Boot rsd lite 6.1.4, select retail rom, and indicate that only "unzip" connects your motorola razr I, and it connects back to the other phone (in my case htc wildfire), which has a debug mode enabled.
7. - Note, that in the window of the Rsd Lite in row 1, the Razr I phone is detected, then you start flashing in RSD Lite 6.1.4, see screenshot of your razr I to see that data is being sent, (the other phone should not be affected and only serves as a decoy to usb drivers, Rsd lite at least do not damage to my phone)
8. - Remember flashing erase the card was in your internal Razr I therefore will lose programs, photos or music you had or downloaded to the SD or internal virtual
9. - Flashing can stop and have to do everything again, but remember that no fastboot mode screen should read:
"fastboot reason: flash failure or otherwise cuarquier xxxxxx xxxxxxx ......." must be clean that is just:
"fastboot reason: "
luck : Good:
Warning, do not take responsibility for any damage to your cell involved in the process, ......... the lure of the phone can be found on youtube and just suits the way because of my need to get my phone ........ in no way am programmer or software developer, for which only comment what turned out ok to me
excuse my bad English
Click to expand...
Click to collapse
Could PM Me with the instructions in spanish, there are some things that i do not understand in your english
Tried to use your method but RSD lite got stuck on "4/11 erase userdata" and the phone says "program dummy sp block for userdata" I don't thin I understood well the part of the second phone, does it have to be on, i mean normal on, or does it have to be in flashmode aswell?
Hey :crying: i have a moto g 2014 (xt1063), and right now, is full bricked (Black Screen, detected as Qualcomm 9008).
This is my gf phone, the phone gets in bootloop when battery get 0%, i tried to factory reset using recovery, but when i try to enter in recovery option through fastboot mode, the cellphone just start flickering and recovery never works.
My error: reflash stock rom with locked bootloader.
After that, when i tried to turn on the cellphone, i just get into fastboot with the message "fastboot mode rease UTAG flashfail", and i cannot flash anything, "Remote Failure" error. I tried and tried and in a moment the screen turn off and the cellphone never turn on (even in the corrupt fastboot), no vibrate, no turn on... I tried a tool posted here named blank flash, but i get "error sending package"...
There is no solution?
Sorry my bad english.
Hey, I have a Moto X 2014. I'm running a cynanogen mod on it. For some reason the phone is stuck in bootloader mode, then starts up with the cynanogen logo, then just goes back into bootloader and repeats. I've held the power and lower volume key to get into the bootloader menu. I've tried normal, recovery, and factory and nothing seems to work at all. I cant seem to figure out how to get into TWRP, which I think if I can that could solve the problem by wiping some data and flashing a new ROM. Any thoughts or ideas how to fix this? Also, the phone wont show up as registered on my computer when I plug in the USB cord, so an command prompt "adb recovery" isn't an option I think. If you need more specifics please ask! Really dont want to have to get a new phone.
You can try to enter recovery through the PC command 'fastboot reboot recovery'. If that doesn't work, look up how to flash the stock firmware using fastboot.
Mobile hung on the logo android one BootLoader is locked
Enter in fastboot mode and make a factory reset. If you dont have the USB Debugging active and cant use fastboot commands then try to enter the recovery mode.
And for those who will say that the phone doesnt have one, i had a problem trying to use the themes from mi a1 (android 8.1), and got a corrupted system and used the recovery mode to do a factory reset. Maybe this recovery is only available in situations like this, i dont know and im a noob in these, but what i can say is that i used it.
Not working
up
Boot to recovery holding volume up and do a factory reset
You should also first describe what you Did to cause the issue, it won't boot loop by itself
HI
did not work
i updated it
Hello, recently i had some issues with my phone, and i thougt. well i should do a factory reset, just in case, but when i did the reset, the phone was in the same condition as before, so my next step was to reflash the stock rom, im not in custom ones btw, and my phone is still locked, long story short, with every program comand, and even oficial software, my phone refuses conection, with android cmd tools, its always stuck forever in a line called, sendig partition (45kb) and thats all it can be there for hours, the phone is just doing nothing, also the booloader oficial cmd, cant extract the key just sit there doing nothing, however, my phone is not bricked, bootloader devices detect my phone but i cant reflash the phone, i already tried the blank flash cmd, just say waiting for device. can someone help me with this issue? im not a noob, i already save one moto x with blank flash and rooted several past generations of moto phones.
priviet.toledo said:
Hello, recently i had some issues with my phone, and i thougt. well i should do a factory reset, just in case, but when i did the reset, the phone was in the same condition as before, so my next step was to reflash the stock rom, im not in custom ones btw, and my phone is still locked, long story short, with every program comand, and even oficial software, my phone refuses conection, with android cmd tools, its always stuck forever in a line called, sendig partition (45kb) and thats all it can be there for hours, the phone is just doing nothing, also the booloader oficial cmd, cant extract the key just sit there doing nothing, however, my phone is not bricked, bootloader devices detect my phone but i cant reflash the phone, i already tried the blank flash cmd, just say waiting for device. can someone help me with this issue? im not a noob, i already save one moto x with blank flash and rooted several past generations of moto phones.
Click to expand...
Click to collapse
Try LMSA's Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
I had a similar problem just now - could not do anything in fastboot mode, LMSA failed as well. To solve it, I switched to another PC, and stopped using USB3 to USB-C custom cable, and used the original one I got with the phone (USB-C to USB-C). So my guess is, you need to connect to the PC with the original cable, directly, or just with a better cable than the one you were trying with.
my motog7 Lenovo android is stuck in bootloader mode tried to reset or restart nothing keeps jus sitting there Help
Gingerale2020 said:
my motog7 Lenovo android is stuck in bootloader mode tried to reset or restart nothing keeps jus sitting there Help
Click to expand...
Click to collapse
What does getvar all say
Code:
fastboot getvar all [/Code
[url]https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039[/url]