Related
Okay, so lots of people have problems with their bluetooth. I am too. I have a JVC KW-XR810 car stereo and the bluetooth keeps shutting down on one or the other. My questions are:
Does anyone else have this stereo and problem? If so, whats the situation?
Is there a ROM that works flawlessly (or close to) with the bluetooth?
Its odd though, that my headset works perfectly and I didn't have many problems with another stereo I've used. Makes me wonder if its the stereo or the phone. Still, many others have bluetooth problems with this phone...
Thanks for any responses.
Stock Froyo
Rooted
One click lag fix
My last 3 phones (including this one) have all worked flawlessly with my Sony MEX-BT3700 head unit. Phone calls, BT dialing, streaming music, all work perfectly.
Yep, same here - AT&T replaced my Captivate under warranty about 2 or 3 weeks ago due to the random shut-down issue. Took the new one home, installed Froyo, and rooted it. Everything works well, except lately I've been getting frequent bluetooth disconnects from my car stereo (Pioneer AVIC-X920BT).
The usual pattern seems to be it's good for about one call, and then shortly after ending that call, I notice that they are no longer connected. I usually turn off BT on the phone (seems to take a while to terminate) and then turn it back on, but it will usually only be good for a single call. It's been frustrating, and I'm leaning toward the problem being on the phone side, since that's where there have been recent changes.
Must be a problem with Stock Froyo. Glad I'm not using it.
I've had this issue with certain roms I was running. I have a Kenwood KDC-X993. So far on CM7 it stayed connected.
Sent from my SGH-I897
i have the same (or similar) problem with my OEM headunit on a VW Golf. BT randomly disconnects but my music (pandora) still plays through the BT stereo, unless I stop it. Then its completely disconnected and I'll have to reconnect the phone to the car.
annoying but I just deal with it.
I'm running Paragon 6 and have a Dual head unit. I haven't had any disconnect issues, my problem is the crappy Pandora app.
mdaudioguy said:
Yep, same here - AT&T replaced my Captivate under warranty about 2 or 3 weeks ago due to the random shut-down issue. Took the new one home, installed Froyo, and rooted it. Everything works well, except lately I've been getting frequent bluetooth disconnects from my car stereo (Pioneer AVIC-X920BT).
The usual pattern seems to be it's good for about one call, and then shortly after ending that call, I notice that they are no longer connected. I usually turn off BT on the phone (seems to take a while to terminate) and then turn it back on, but it will usually only be good for a single call. It's been frustrating, and I'm leaning toward the problem being on the phone side, since that's where there have been recent changes.
Click to expand...
Click to collapse
Same here, I have a Parrot mki system in my car, but I found a workaround that I hope works for you too:
Unpair with the device, and when you re-pair it, when it asks you to synchronize contacts, do not let it. It will bug you every time it connects, but just ignore the requests.
I haven't had a single disconnect since doing this weeks ago.
I've read about the contacts request from other users but it doesn't happen with mine. Another thing, when I lose the connection and I turn off bt one the phone out shuts off. Completely. Pushing the power button does nothing. Holding the volume up and power buttons together for a few seconds seems to restart it but theres no animation. Just the lock screen, media scanner, etc. Maybe its restarting on its own and the button pushing has nothing to do with it. Also, I listened to my bt headset for hours last night with no probs at alI. Idk. Is bt different for head units? I thought it all used the same protocals.
So it seems that its not my head unit, but the phone. Are there any good solutions for us?
Sent from my SAMSUNG-SGH-I897 using XDA App
My head unit never asks to download contacts. Could it be that some do because they store that info in order to identify and announce incoming calls? That would mean there's more going on than just a simple BT connection.
Yeah. One post I read said something about it using a data connection the hu for contacts. I have no idea what he was talking about though.
Sent from my SAMSUNG-SGH-I897 using XDA App
My head unit have the ability to sync contacts. When I first paired it, the phone asks me for permission and there's a check box to always allow.
Sent from my SGH-I897
nahrah said:
My head unit have the ability to sync contacts. When I first paired it, the phone asks me for permission and there's a check box to always allow.
Sent from my SGH-I897
Click to expand...
Click to collapse
The only purpose I can see for this is if the head unit has an integrated nav system. That would allow you to bring up a contact as a nav target independent of the phone.
Okay, gettinging back to my original questions. So far we've established that this is endemic to the captivate, mostly. There have been two replies saying that cm7 and paragon 6 have stable bt connections with head units. I read in another post that axura works as well. This is so frustrating that I'm just about willng to learn how to flash this thing.
Sent from my SAMSUNG-SGH-I897 using XDA App
NvigR8 said:
Okay, gettinging back to my original questions. So far we've established that this is endemic to the captivate, mostly.
Click to expand...
Click to collapse
We have? My first post says I have zero issues with this on my head unit with my phone on Eclair, Froyo and now Andromeda. If it is a phone issue mine is not suffering from it. Sounds more like it has something to do with head units that store contact data. Mine apparently doesn't.
Hmmm.
Yet in your second post you posited that it must be a Froyo issue.
Regardless of whether it is the phone or OS, a lot of Captivate owners seem to have bt issues of one kind or another with various devices. Maybe this is just a bt issue in general that everyone deals with (not just Captivate owners) and I'm just being sensitive because I haven't had much bt exposure.
Any help is appreciated here. I'm just looking for suggestions on what to do short of buying a new phone or head unit. It would be great if other users experiencing this problem would benefit from the discussion as well.
So far it appears that flashing a different ROM may be a solution but which one? Is there any way to change only the bt stack?
Sorry if that sounded short, but I'm REALLY frustrated with this.
My hu will store contacts as most do these days, but it doesn't ask for them. I don't think the problem is related to the contacts. I guess its just a random incompatibility thing.
I said it "might" be a problem with stock Froyo. I didn't see it the 3 days I was running it and my current ROM is Froyo-based and working without issue. The only other variable I can see is that others posting problems have reported having to deny access to contacts, something my head unit never asks for, in order to get it to work. That would appear to indicate the difference is in the head units and not the phones, but unless I could connect to one of these other head units to verify, I'm only guessing. Sorry.
i notice that if I toggle the bluetooth on my phone right before connecting it to my car, it works flawlessly
Installed a Kenwood X994 and had all kinds of issues with BT. Worked for awhile but would never auto connect. Only vehicle and area where I had BT issues. I realized it was due to the downloading of contacts at every connect. sometimes it would download than immediately disconnect. frustrating. Was on serendipity, Tried a native Cappy ROM, Cognition and now Phoenix..
The unit has the Parrot system in it so it should be ok. Finally decided to update the Firmware on the HU. So far so good. I like the contact download so I don't need to use the phone at all to make a call. Receiving calls is no problem.
Will test further tomorrow.
BTW I have a BT Garmin mounted in the truck and used it before getting the head unit. no problems connecting. The only issue with that was a delay between pressing the call button and the call being made. Hanging up was an issue as well.
I got my Note 4 yesterday and was trying to connect my car radio (Jvc Kw-V50BT). The phone connected, but when trying to connect the media part of the phone it just doesn't want to connect. I had a LG G2 prior to this phone and it worked fine. I checked JVC and it should work with Bluetooth 2.0 and up. This is baffling my mind right now. I might have to factory reset my phone and try it that way. Any help would be appreciated.
No problems here I use my Ford touch and everything is fine
HtcOnekid said:
No problems here I use my Ford touch and everything is fine
Click to expand...
Click to collapse
well I might have to factory reset it then.
redstar kachina said:
well I might have to factory reset it then.
Click to expand...
Click to collapse
If it still doesn't work...try another BT source.
Works better with my Ford Touch than any phone previously.
---------- Post added at 10:55 AM ---------- Previous post was at 10:53 AM ----------
Try reseting your radio... not sure how you do that with your model. Make sure you delete the old pairing.
bt 4.0, which most newer phones have, is very touchy about what it works properly with; I have a bad time trying to stay connected to my vivosmart garmin band, but pairing to my car and plantronics headset works 100% of the time.
my wife has a G3, and has the same issues; some things work 100% of the time, and some others only work occasionally
A2DP Issues
I just got my Note 4 yesterday, and am definitely experiencing some (admittedly minor) issues with A2DP in my Honda CR-V EXL 2012.
When playing music over Bluetooth, I experience the infamous "Galaxy S5 intermittent half-second skip". Also, I have noticed that when playing an album or playlist, if the screen on the phone is off the currently playing song information will not update.
For example:
I am listening to "Gimme More" by Britney Spears on the album Blackout.
"Gimme More" ends, and the next track "Piece of Me" comes on.
The car screen will continue to show "Gimme More' unless I use the forward or back buttons from my steering wheel or dashboard to manually change songs.
This causes the screen to update to "Piece of Me"... albeit with a brief delay.
Very odd...
SiNJiN76 said:
If it still doesn't work...try another BT source.
Click to expand...
Click to collapse
I finally got it too work, but I had to get an app to help me out. I think it was called Bluetooth Manager or something. I forced it to accept the media and got it working. I was getting frustrated when even a factor reset didn't help.
Yes, I have the stuttering too on my Note 4. What can I do about it?
Note 4 note; note, Bluetooth.
redstar kachina said:
I got my Note 4 yesterday and was trying to connect my car radio (Jvc Kw-V50BT). The phone connected, but when trying to connect the media part of the phone it just doesn't want to connect. I had a LG G2 prior to this phone and it worked fine. I checked JVC and it should work with Bluetooth 2.0 and up. This is baffling my mind right now. I might have to factory reset my phone and try it that way. Any help would be appreciated.
Click to expand...
Click to collapse
This may not help but.. Got my Note 4 four days ago; had the Note 3. 3 Had 0 problems with Bluetooth; 30 ft. through walls, drops rare, auto connected to my car while I was in the house. Note 4 range 15 feet,, constant drops and fails to connect. Hoping to get another 3 or 4 from T-mobile but that has not happened yet. I'm good carrying both. The 4 makes calls (although the speaker is a downgrade. The 3 connects to all my stuff. just like the old days at work. :fingers-crossed:
This is what I'm using. No issues.
It's not super new. Just a decent deck. But, the rule is the newer the better with flagship phones:
Not sure if this is related or not - I have an open thread about blue tooth streaming issues with my car...
What I have found so far -
My car (2012 Subaru STi) has two methods to pair a blue tooth device... entering the setup through the steering wheel is the only way to save a device for auto connect and play, entering the setup through the head unit lets you save and select a phone to pair, but you must select pair each time you get into the car. If you do option #2, I have the call audio and media boxes always unchecked. - see if your car has a different method for primary user/secondary user blue tooth set up
and secondly, my main issue was that while listening to spotify my radio head unit would say BT-Audio Paused out of nowhere, when in fact, the spotify track still shows playing and the song is progressing.
after lots of troubleshooting I think this may be an issue to spotify itself and not my phone (I am now testing Pandora/other streaming media to see if they do the same interment freeze/odd stuff)
I've also been having problems with Bluetooth devices connected to my Note 4. Previously, I had been using an iPhone 6 and I didn't have any issues with these devices. Now, I'm experiencing connection problems with my Jawbone UP24, my Plantronics headset, or my Jaybird stereo earbuds, and other devices. Once I reboot my Note 4, the BT connection is usually back. But, sometimes I have problems even after I've rebooted the Note 4. If I power cycle my BT peripheral, I'm usually OK as well.
So - my question is: could it be possible that some of my Bluetooth peripherals (like my Jawbone UP24) may be causing some type of interference? Or, do I have faulty hardware?
Older Bluetooth Devices always seem to be hit or miss on the newer Samsung devices that have been coming out. May be its age being the factor, lol. :silly:
Has anyone else been unable to make phone calls after connecting to your vehicle's bluetooth? Most of the time, I can make phone calls without issue. Sometimes, I can't even hear the call ring when I'm connected to bluetooth. Occasionally, when I turn my vehicle off, the call goes silent instead of transferring to the earpiece on the phone. The only way I can fix the issue is rebooting the phone. This has become increasingly frustrating for me, since the issue is so inconsistent.
I'm running the stock ROM, rooted and un-encrypted.
Thanks!
Same here
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I just got my N6 today and I'm having trouble with My Ford Touch as well. I can get it to pair and play music, but it won't "connect" to my phone. It's odd because my N5 works fine with it. I would assume the N6 wouldn't be different.
We probably have to wait for an update from Ford, which will probably take months...
EDIT: Well I decided to try it again. I deleted the Nexus 6 entry as well as the Nexus 5 entry. Went through the pairing process again and it worked as intended. Not sure what happened the first time.
I ran into the same problem as others where my N5 worked flawlessly with my Ford Sync in my fusion, but the N6 is terrible.
I love the phone, but this is really annoying. I get into the car and sometimes it connects immediately, other times I have to turn off and back on the bluetooth about 3 times for it to finally connect. Very weird. Ford offers an upgrade to my Sync system, but wants $50 to do the upgrade. Pass.
I might try what the other person did and delete all entries for phones and pair it again. Unfortunately, the weather is pretty bad outside, so it might need to wait a short bit.
Has anyone else had luck re-pairing with their car and had reliable connections?
I use Ford Sync.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I use Ford Sync, and everything works as expected. I am Stock and unrooted. I guess it would come down to what version of Sync. Mine is from 2012. No touch screen. I also delete all other entries on the system and start from scratch making sure that the N6 is the main device.
If I can wake up the screen on my own, outgoing calls work fine
PaisanNYC said:
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
Click to expand...
Click to collapse
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
androidfan91 said:
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
Click to expand...
Click to collapse
Since I last made that post you quoted, i purchased and installed a 2015 model of the Pioneer AVIC-8100NEX. It has Android Auto, but can be used with the regular Pioneer UI also. I have had no issues anymore with this new radio. Maybe the BT protocol in the radio is newer? Im not that tech savvy to know. But the 2015 radio had no issues with BT calls anymore, on Pioneer's UI or Android Auto's UI.
Hey All,
I've done a quick and dirty search for this problem, but I haven't found anything that's exactly the same.
I have an XT1060, Dev Ed, on KK 4.4.4, and I'm just wondering, am I the only one who cannot get my bluetooth radio to hook up to paired devices easily?
The problem is, I always have to ask to connect manually; this is a bit of a pain, especially after turning off my car, say, for a few seconds. Oh, it'll connect, but sometimes it takes 10-15 tries before that connection is made, and even then, it's often after I have to disconnect then attempt to reconnect a few times because it doesn't connect both the phone and media modes.
I have done the unpair/re-pair thing a couple of times, but nothing changes.
I had an HTC phone before this, and it'd reconnect automagically to my cars BT server, so I suspect it's nothing to do with the car's BT radio. I really miss that...
Thanks for any suggestions anyone might have in how to remedy this. Fwiw, I'm willing to go through a diagnostic procedure if someone would clue me in to just how to do that.
cheers,
john
I've had issues with the bluetooth and pairing. When I was on 4.2.2 (I think..) it wouldn't connect automatically at all, and I used an app to connect for me. I have a Chevrolet Cobalt and it wouldn't connect to my built in bluetooth for calls or a small bluetooth dongle that I use for playing music through the AUX input on the stock radio.
https://play.google.com/store/apps/details?id=org.myklos.btautoconnect&hl=en
Once I was on 4.4.2 it seemed to work much better. I have no real issues now on 4.4.4. The only time I notice it not really working right is when I try to connect to the bluetooth speaker in our bathroom at home. If I turn the speaker on, it almost always connects to my girlfriends phone nearly instantly, even though I open the bluetooth menu and tap the paired device to manually initiate right when I turn on the speaker. It usually takes me a few tries to get mine to connect before hers, or I ask her to shut her bluetooth off for a moment while I connect. She uses the speaker every day because she leaves for work after me, so it only happens to me 1-2 times per month on the off chance that I want to listen to music or a baseball game in the shower, so it never really bothered me much.
I think the bluetooth radio in this phone could be better.. I never had any similar issues with my Droid X or Moto Razr Maxx so I'm not sure what the deal is...
Edit: forgot to mention I also have an XT1060, but not dev edition. My bootloader is unlocked and I am rooted, but using the official 4.4.4 VZW rom with Xposed.
I have never had any issues pairing Bluetooth - on either my car or moto 360 watch (even simultaneously).
However, I have noticed that the Bluetooth connects much quicker on custom ROMs when compared to stock.
I think tour connection issue may be a setting or rogue app related.
Sent from my Moto X using XDA Free mobile app
Thanks to both of you for your replies!
Fwiw, things have not gotten any better since I posted my question. I'm getting more accustomed to it, though.
As for the possibility of a rogue app, yes I suppose so, but short of uninstalling everything, and adding them one by one and trying to connect to something via BT, how can someone go about debugging such a thing?
cheers,
john
jrredho said:
Thanks to both of you for your replies!
Fwiw, things have not gotten any better since I posted my question. I'm getting more accustomed to it, though.
As for the possibility of a rogue app, yes I suppose so, but short of uninstalling everything, and adding them one by one and trying to connect to something via BT, how can someone go about debugging such a thing?
cheers,
john
Click to expand...
Click to collapse
You may need to delete the profile for the Bluetooth pairing in your car. Could be a conflict there.
Otherwise, try looking at your Bluetooth settings on the phone.
Sent from my Moto X using XDA Free mobile app
jrredho said:
...
I have an XT1060, Dev Ed, on KK 4.4.4, and I'm just wondering, am I the only one who cannot get my bluetooth radio to hook up to paired devices easily?
The problem is, I always have to ask to connect manually; this is a bit of a pain, especially after turning off my car, say, for a few seconds. Oh, it'll connect, but sometimes it takes 10-15 tries before that connection is made, and even then, it's often after I have to disconnect then attempt to reconnect a few times because it doesn't connect both the phone and media modes.
Click to expand...
Click to collapse
Is it *ALL* bluetooth devices, or just the car? What model and year car? Are you connecting to the Hands Free profile, Headset Profile, or doing something like A2DP for music streaming?
How long have you had the phone, how long has this been a problem? Has the symptom ever changed?
Keep in mind, just because your HTC phone connected to the car just fine, doesn't mean the car could not be the issue. While the Bluetooth profiles and protocols should be "standard" I've seen many issues of interoperability issues between bluetooth devices over the years. Especially with car kits.
KidJoe said:
Is it *ALL* bluetooth devices, or just the car? What model and year car? Are you connecting to the Hands Free profile, Headset Profile, or doing something like A2DP for music streaming?
How long have you had the phone, how long has this been a problem? Has the symptom ever changed?
Keep in mind, just because your HTC phone connected to the car just fine, doesn't mean the car could not be the issue. While the Bluetooth profiles and protocols should be "standard" I've seen many issues of interoperability issues between bluetooth devices over the years. Especially with car kits.
Click to expand...
Click to collapse
Guys, thanks for staying with me on this. One thing I've definitely learned is that the bluetooth thing is something I'm pretty ignorant on. I can see that I'm going to have to study it a bit before too long. Gad, that HTC spoiled me rotten---at least in that way.
I haven't tried the phone with any other BT devices. This is mostly because I don't own but two, the car and a travel speaker, and I haven't had the speaker out of its case since I scored the phone six or eight weeks ago. Also, I did some housecleaning, so I have only a small fraction, maybe 20%, of the same apps on the MotoX that I had on the HTC. I have no apps on the MotoX that I didn't have on the latter.
As for some of the car-related suggestions, it's a 2015 Subaru Forester Premium 2.5i, which is really only level up from the base model of that line. I can't find that there is a bluetooth profile setting in the car that I can change; I think that it's too basic. The relevant user manual simply states the following:
Media format
Bluetooth audio devices cannot be
connected if they are not compatible with
the following Bluetooth® profiles.
. A2DP (Advanced Audio Distribution
Profile)
. AVRCP (Audio/Video Remote Control
Profile)
I don't even know what either of those mean!
Anyway, what I did do is go to the phone settings, and uncheck the Media box that shows up once the car's BT server is detected. Then I try to connect with the Phone box checked. It'll still fail to connect several times, but (a) it doesn't take as long to fail to connect, (b) it doesn't take as many tries (it seems) to make the connection, and (c) when it fails, it fails totally, so I don't have to disconnect from 'Media-only Connected (No Phone)' connection. That makes it easier I suppose. Then once the connection is established, it's a simple matter to go back to settings, and check the Media box. That add-on connection happens pretty quickly, but the process is still a little overwrought, imo.
Of course, KidJoe, up until you mentioned a Headset Profile, I didn't know one existed. But when I try to play music on my phone using PowerAmp, well, the app doesn't hook up to the BT anyway. That's a key difference between the HTC and the MotoX. In PowerAmp, I have "Play over Bluetooth on Detection" selected. The headset isn't being detected at all. So maybe that goes some distance to explaining what I'm encountering.
Again thanks to both of guys for hanging in there with me! I'll keep trudging "onward through the fog," as it were...
cheers,
john
A2DP and AVRC are used for Bluetooth Stereo audio streaming (like playing Pandora on your phone via your car stereo). Not phone calls.
For phone calls, usually a Headset or Handsfree profiles are used, and sometimes BT Phone Book Access (so you can see your phone's contact names/numbers on the car's screen).
I've run into compatibility issues between some phones and some Headset/Handfree devices (mostly cars, but a few bluetooth headsets too). Often times when this happens, you're stuck. Each side will blame the other (i.e. Moto will blame the Subaru car stereo, and Subaru will blame the phone).
I have had issues re-connecting to my car (a 2011 Saab 9-4x with Bose/Nav), IF I had my Moto S11 Flex HD headset connected to my Moto X before I got in the car (even if the S11 was powered off/disconnected from the X before I started the car). Usually toggling the X's bluetooth off/on, and sometimes worst case rebooting the phone, has always fixed it.. Another time I had troubles connecting to my Saab's car kit was when my wife was using her phone to stream audio. The next time I got in the car, I had to manually connect my phone. The car always tries to connect to the the last phone used, so it was looking for my wifes and it took a while before it timed out. When it did time out, it didn't look for mine.
Since you have a 2015 Subaru, I would consider visiting your car dealer, ask them to help with pairing the phone properly, and making sure its working right. See what they have to say.
My bluetooth in my car stopped pairing the other day, and it turns out it was an app that updated and requested permissions related to bluetooth. I didn't notice them because it's an app I trust so I accepted the new permissions without really looking at it.
I used App Settings (Xposed module) to disable the permissions and my bluetooth works fine again.
I could still pair with things if I went to the bluetooth paired device list and manually tapped on the device I wanted to connect with, but it would not pair automatically (like when I got in my car). Once I disabled that permission, it started working again without issue.
May be worth a look through your installed apps to see if anything has access to bluetooth and may be interfering.
Hey All,
Thanks again for the continued help!
It's true, I didn't do any research on app interference before I posted this thread topic, but since a couple of you have brought it up, I decided to do a little research. I installed a permissions app, and took a look at the permissions that allows an app to automatically seek out, and pair with, Bluetooth servers. I have to admit, I got some surprises there. (Who would've thought that Beautiful Widgets needed that permission; it is now gone.)
Anyway, most of the remaining apps are either system/Moto-related, or ones I would really like to keep. I'll report back on what I learn. If there are other permissions that I need to reference besides the two pairing-connecting to Bluetooth ones please let me know...
cheers,
john
Just to open with this - I really like this phone and have been enjoying using it. Aside from the fairly poor WiFi range and the flaky NFC it is otherwise a really nice phone. There's just one other issue I have which is extremely frustrating:
I can't use it with my Airpods. Or at least, I can connect it but at some point the sound will crackle and cut off. If I wait it will occasionally crackle and come back on again but will cut in and out in a way that would drive anyone mad. I've tried fiddling with Bluetooth settings in developer options but it doesn't seem to make any difference. I've even tried a factory reset.
The Airpods work absolutely perfectly with every other device - no issues with the iPhone (expectedly) nor the S8, G6 or even my laptop. I can't 100% rule out a fault with the Airpods but given these facts it seems highly unlikely.
I wondered if anyone else used Airpods and had experienced issues and found a solution.
Not too interested if you've had no issues with your device, nor what you think of Airpods - I just want to see if I can get to the bottom of this, or the Nokia will have to go back.
Many thanks
Similar problem
Got a similar problem with my apt-x receiver.
Every few minutes the connection drops for a very short time.
The airpods don't support apt-x, but maybe it's the same problem.
My receiver shows a connection via apt-x, , but you can't find any apt-x support in the Nokia 8 specs.
But I had no problems with a friends portable speaker (non-apt-x).
I went back to cables
damian101 said:
Got a similar problem with my apt-x receiver.
Every few minutes the connection drops for a very short time.
The airpods don't support apt-x, but maybe it's the same problem.
My receiver shows a connection via apt-x, , but you can't find any apt-x support in the Nokia 8 specs.
But I had no problems with a friends portable speaker (non-apt-x).
I went back to cables
Click to expand...
Click to collapse
I’m wondering if the Nokia 8 just has rubbish connectivity, generally. If the Bluetooth chip is part of the WiFi chip then this would figure as it has the worst WiFi connectivity I’ve seen in recent years
Are you running Nougat or Oreo? From what I've heard, a lot of the bluetooth issues have been fixed in Oreo.
leoni1980 said:
Just to open with this - I really like this phone and have been enjoying using it. Aside from the fairly poor WiFi range and the flaky NFC it is otherwise a really nice phone. There's just one other issue I have which is extremely frustrating:
I can't use it with my Airpods. Or at least, I can connect it but at some point the sound will crackle and cut off. If I wait it will occasionally crackle and come back on again but will cut in and out in a way that would drive anyone mad. I've tried fiddling with Bluetooth settings in developer options but it doesn't seem to make any difference. I've even tried a factory reset.
The Airpods work absolutely perfectly with every other device - no issues with the iPhone (expectedly) nor the S8, G6 or even my laptop. I can't 100% rule out a fault with the Airpods but given these facts it seems highly unlikely.
I wondered if anyone else used Airpods and had experienced issues and found a solution.
Not too interested if you've had no issues with your device, nor what you think of Airpods - I just want to see if I can get to the bottom of this, or the Nokia will have to go back.
Many thanks
Click to expand...
Click to collapse
I wonder if yours is wonky, my Wi-Fi is excellent and i get get 75Mbit down 19Mbit up over 5Ghz through 2 brick walls, a floor up and at the opposite end of the house, i have not missed any payments using contactless via NFC and Bluetooth works fine via an Anker Bluetooth speaker and my JBL Bluetooth headphones.
Sorry for digging an old thread, but I still have the same problem even after a bunch of software updates.
My issue with the AirPods is that they do not work after they connect. I take them out of the case, they connect (as expected), but as soon as I start playing something the music/video pauses and the sound switches to speaker (if I press play again it plays out loud). To make them work I need to go to bluetooth settings, disconnect them and connect them again. Then they will work almost flawlessy (minor intrerruption from time to time).
I have no issue with other BT speakers. I also use the AirPods with an iPad and laptop and no issues there.
My Nokia 8 software is up to date. AirPods firmware the same (checked on the iPad).
I tried re-pairing after each software update. I tried changin BT settings (absolute volume - dev settings; contact sharing and HD Audio: AAC) but no improvements.
Any ideas what else can I try?
Search for Oreo and Bluetooth problems. It seams to be a general issue for this Android Version. I have problems connecting my Phone with the car, too.