Database Develop

Bricked device. What to do now?

Hi xda!
I accedently bricked my phone last monday. I wanted to flash stock ROM from Blazing Dragon and while flashing via smartflash I got an error. Since then my phone won't start. The only signal I get is when I connect it to my PC. It says that either an "Unknown Device" is connected or I can connect it as an APX-device.
no matter what I try, I get no response from the display. And I tried to restore via nvflash etc.
I'm confused and dont know what to do now. I aprecciate any help!

back to stock rom, and try to re-install ur driver on pc.
good luck

Your device enter in download mode?
Follow this guide and install suggested driver...if it doesn't work try to contact lg assistance

Cino86 said:
Your device enter in download mode?
Follow this guide and install suggested driver...if it doesn't work try to contact lg assistance
Click to expand...
Click to collapse
already tried that, doesnt worked... But I've got a custom rom in my device..so I think its not a good idea to send it to lg

[Q] Problems with recognizing

Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?

croluka4789 said:
Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?
Click to expand...
Click to collapse
Check if you have the latest drivers, connect the phone in recovery (vol- and connect to PC), flash with LGFlash Tool.

RuedasLocas said:
Check if you have the latest drivers, connect the phone in recovery (vol- and connect to PC), flash with LGFlash Tool.
Click to expand...
Click to collapse
I cant flash my LG with LG Flash because tihs program dont reconized my phone.. "Phone is not found"

croluka4789 said:
I cant flash my LG with LG Flash because tihs program dont reconized my phone.. "Phone is not found"
Click to expand...
Click to collapse
palalos81 said:
hi. i woould like to downgrade from v20a to v10h and the lgflashtool doesn't work.some times stuck on ready and some others on 10%i have tried almost everything from installing the drivers once more until change pc and ports.is there any option to downgrade with another way?
Click to expand...
Click to collapse
There is no other way...
Did you follow the tutorial? Did you remained calm and gave time for windows recognise your device?
Did you uninstall and re-install the drivers? You're able to reboot in SW mode (vol- pressed while connecting to PC)?
Here you have all files needed:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
Delete your old files, download new ones and follow the tutorial.
Remember to remain calm and give time to system recognise and install everything needed.
Good luck :fingers-crossed:

RuedasLocas said:
There is no other way...
Did you follow the tutorial? Did you remained calm and gave time for windows recognise your device?
Did you uninstall and re-install the drivers? You're able to reboot in SW mode (vol- pressed while connecting to PC)?
Here you have all files needed:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
Delete your old files, download new ones and follow the tutorial.
Remember to remain calm and give time to system recognise and install everything needed.
Good luck :fingers-crossed:
Click to expand...
Click to collapse
TNQ...I fix my LG...and know work perfect I put 20A kdz. 4.1.2. and phone work perfect

Same problem here
I have the same problem. I think the stupid thing I did was to install V20a without rooting the phone. Now I cant root it. IS11LG_SystemBackupTest.signed.ap would not run and when I try to recover either with LGflashboot or LG firmware recovery I get the same error message "morning call is empty" (very strange error message). I can go back to v20a but since I am not completely happy with it I would like to resolve it. Is there any chance to fix it? I am not very confident to format bootload or installing custom ROM.
Thanks

sgiedrius said:
I have the same problem. I think the stupid thing I did was to install V20a without rooting the phone. Now I cant root it. IS11LG_SystemBackupTest.signed.ap would not run and when I try to recover either with LGflashboot or LG firmware recovery I get the same error message "morning call is empty" (very strange error message). I can go back to v20a but since I am not completely happy with it I would like to resolve it. Is there any chance to fix it? I am not very confident to format bootload or installing custom ROM.
Thanks
Click to expand...
Click to collapse
You cannot root the phone on V20a using IS11LG_SystemBackupTest.signed.apk, since that file is used for versions V10x. Check out this link for rooting V20a: http://forum.xda-developers.com/showthread.php?t=2180688

croluka4789 said:
Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?
Click to expand...
Click to collapse
Same problem here!

xavierleonelbr said:
Same problem here!
Click to expand...
Click to collapse
Uninstall all drivers and folders like "LG United Mobile Driver" and "LG USB Modem Driver".
Re-install the drivers:
http://www.4shared.com/file/rPpP2btT/LGUnitedMobileDriver_S4981MAN3.html
http://www.4shared.com/file/ZSMf2x6n/LGUSBModemDriver_Eng_WHQL_Ver_.html
Take out the battery, press "Power Button" (just to discharge all phone components), put the battery back on the phone.
Press "Vol-" and connect to PC. Wait while windows detect the device and search in windows update for possible new drivers.
Windows won't find a thing but will take some time while trying...
After that you should be OK.

Just did similar to my phone and followed the advice in this thread - now sorted. Thanks guys you rock!

if u epic fail to manually force the drivers in just install android jdk open it and update it.

croluka4789 said:
Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?
Click to expand...
Click to collapse
I had the same problem, after running several recovery procedures and kdz files, I finally was able to restore the phone to it's original ICS rom.
Download the files in the description and follow up the video.
http: www youtube com watch?v=12v5A3pArJQ
hope it helps.

[Q] Please Help! can't swicht on - stop on LG logo

Hello,
I'm new and I just starting.
Everything going well, but when I want to install CMW I made an error, I don't unlock bootloader before the install, and now when I switch on my phone (lg p880) I see LG logo and nothing happens.
- I tried to "Update firmware through flashing the kdz files" by post on XDA, I have error when I press button 'launch software update' in KDZ_FW_UPD, error about Up text Ex mod2. I add my phone have root!
- I tried to unlock booloader in All in One but my phone don't have debbuging switch on, thats information show me.
- I tried in SDK Manager with fastboot, eclipse and drivers are installed but something maybe I do wrong and isn't work too.
- My computer don't see phone, when I connected phone to computer holding VOL-
How can I do something? How to install maybe orginal ROM, but I want to install Avatar ROM on XDA and this is the beginnig I read that to install the ROM I must have root, unlock bootloader and CWM.
I can go only to orginal recovery and s/w update (but there is nothing doing, when I connected to computer holding VOL- , my computer can't see phone, and I don't have connection with LG Mobile Support Tool)!!!
So now I have nothing
Please HELP me, I don't have phone now and this is terrible.
I add that I'm a girl so please write step by step

[email protected] said:
Hello,
I'm new and I just starting.
Everything going well, but when I want to install CMW I made an error, I don't unlock bootloader before the install, and now when I switch on my phone (lg p880) I see LG logo and nothing happens.
- I tried to "Update firmware through flashing the kdz files" by post on XDA, I have error when I press button 'launch software update' in KDZ_FW_UPD, error about Up text Ex mod2. I add my phone have root!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2069723
And if you dont have the lg optimus 4x usb drivers , it wont work.
[email protected] said:
- I tried to unlock booloader in All in One but my phone don't have debbuging switch on, thats information show me.
Click to expand...
Click to collapse
if u cant boot then how are u gonna put it in debbuging mode ? ... its in settings.
[email protected] said:
- I tried in SDK Manager with fastboot, eclipse and drivers are installed but something maybe I do wrong and isn't work too.
Click to expand...
Click to collapse
fastboot is used to install something in adb fastboot mode or to flash a recovery image.
[email protected] said:
- My computer don't see phone, when I connected phone to computer holding VOL-
Click to expand...
Click to collapse
usb drivers and adb drivers.
[email protected] said:
Please HELP me, I don't have phone now and this is terrible.
I add that I'm a girl so please write step by step
Click to expand...
Click to collapse
so what ? and me im superman
---------------------------------------------------------------------------------------------------------
<<USE THE SEARCH FUNCTION OR THE RECENTLY ASKED QUESTIONS IN HELP SECTION>>

Galaxy S3 mini boot-loop

Hi,
I installed Cyanogenmdo 12.1 sucessfully but after i rebooted my S3 mini it will only stay on the first screen (Samsung I8190...screen) i wanted to solve it using recovery but i cant enter recovery cause of my broken home button. I already tried to connect device to computer and use adb reboot recovery but adb dont see the device as connected (cause it´s just in the first screen).
Sorry for my bad english
I hope somebody can help me
I think that only solution ist to buy a USB Jig.

Flash a new rom via odin. Guide here: http://forum.xda-developers.com/showthread.php?t=2159660

It will not work
JoniSerenius said:
Flash a new rom via odin. Guide here: http://forum.xda-developers.com/showthread.php?t=2159660
Click to expand...
Click to collapse
Can't connect to Odin; my device can't connect to Computer

easier & cheaper to fix home button than buy jig, then do wipe in recovery & install rom

beerwolf-crowe said:
easier & cheaper to fix home button than buy jig, then do wipe in recovery & install rom
Click to expand...
Click to collapse
That´s true but i already buyed USB jig

good luck with it then, let us know how you get on

beerwolf-crowe said:
good luck with it then, let us know how you get on
Click to expand...
Click to collapse
Thanks, so have the USB Jig now when I put it in it will not enter recovery but download mode. That´s good ´cause I know now that the only wrong thing I did was to hit yes when TWRP asked me ´Do you want to root your device now´a my recovery doesn´t work now. So I flashed CWM recovery via odin but I can´t enter it ´cause of my broken home button. So the next thing that I will do is to flash a new ROM via odin and then I hope I will be able to connect my device to ADB. When I will be able to connect my device to ADB I will try adb reboot recovery and see what will happen.

Lg L90 boot loading problem

Hi guys,
I tried to flash custom cm13 rom in my lg l90.
for that i want to install TWRP recovery mode.
for this i used flashify app.
here i mistakly flashed TWRP in bootloder.
from that point mobile is not starting.
it is saying secure booting error.
and going blank.
Please help me.

What phone model?
Try restarting in download and recovery mode while connected to a computer using an USB cable and test if fastboot or adb is working. If neither works then you can only try the tutorial for hard bricked devices...

lfom said:
What phone model?
Try restarting in download and recovery mode while connected to a computer using an USB cable and test if fastboot or adb is working. If neither works then you can only try the tutorial for hard bricked devices...
Click to expand...
Click to collapse
it's not starting in download mode.
i gave it to lg service center and they told me to replace the motherboard.
is there any way to bring my phone back...
provide links for it.

venkat0033 said:
it's not starting in download mode.
i gave it to lg service center and they told me to replace the motherboard.
is there any way to bring my phone back...
provide links for it.
Click to expand...
Click to collapse
You didn't say which model you have. This tutorial works for most models, may not work for D415 :
http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429

lfom said:
You didn't say which model you have. This tutorial works for most models, may not work for D415 :
http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429
Click to expand...
Click to collapse
D410