i don't know what happen to my phone..
everytime i flash KKernel.. it always cause a bootloop..
already Flash via odin to stock..
Flash TWRP 2.8.0.0 for Custom Recovery..
i was about to flash ehndroix V 14.10.23, Ehndrogapps, and KKernel KK v5.0 (or v4.0)..
i ended up bootloop.. or i can't even get the bootsplash screen.. after few seconds.. it restart it self.. and do the same again..
if i don't flash the KKernel (Rom and Gapps only) it boot normally even get into the homescreen like normal..
Help please.. (stock or outdated kernel are really drain battery fast!)
all my format are EXT4..
do i need to change the recovery..?
cause if i use TWRP 2.8.1.0 for Lollipop rom (gapps and KKernel too) it boots normal!
Related
(sorry for my English )
the thing is that my Samsung S wont starts ,when i click the power button its starts in CWM RECOVERY and when i press "reboot system now" it enters a boot loop (the logo keeps running over and over and the phone)
before this happened i originally had the stock ROM of my cellular carrier (2.3.3
then i decided to install another rom and kernel (cyanogenmod 10) so i installed first a clean stock rom (2.3.6) via odin
and then the cyanogenmod rom and kernel (up to now its all fine)
after that i wanted to change and install other rom so i installed again the clean stock rom 2.3.6 via odin...and from then it started to boot loop.
i thought that if i will install the kernel again it will be OK ,but it wont..
and now im in the situation that i have described above..
help SOMEONE please=]
LCPD said:
(sorry for my English )
the thing is that my Samsung S wont starts ,when i click the power button its starts in CWM RECOVERY and when i press "reboot system now" it enters a boot loop (the logo keeps running over and over and the phone)
before this happened i originally had the stock ROM of my cellular carrier (2.3.3
then i decided to install another rom and kernel (cyanogenmod 10) so i installed first a clean stock rom (2.3.6) via odin
and then the cyanogenmod rom and kernel (up to now its all fine)
after that i wanted to change and install other rom so i installed again the clean stock rom 2.3.6 via odin...and from then it started to boot loop.
i thought that if i will install the kernel again it will be OK ,but it wont..
and now im in the situation that i have described above..
help SOMEONE please=]
Click to expand...
Click to collapse
it is because the latest CM10 is based on a different partitioning layout than the stock one.. after flashing CM10 once when you go in a boot loop.. go to CWM recovery by using the three button combo and flash CM10 again.. . this time your rom will boot:good:
replay
ishangoyal said:
it is because the latest CM10 is based on a different partitioning layout than the stock one.. after flashing CM10 once when you go in a boot loop.. go to CWM recovery by using the three button combo and flash CM10 again.. . this time your rom will boot:good:
Click to expand...
Click to collapse
I installed the kernel and then the stock rom again but now its just bootlooping without getting load up to CWM recovery
so how can i get into CWM recovery????
(i tried VolumeUP+HOME+POWER but it just get into regular recovery...)
pull out your battery for a couple of minutes then replace battery
;hold three button forever or until it goes into recovery if that doesnt work
reflash through odin and do it again or check out darkyrom 10. re this gets flashed through odin
LCPD said:
I installed the kernel and then the stock rom again but now its just bootlooping without getting load up to CWM recovery
so how can i get into CWM recovery????
(i tried VolumeUP+HOME+POWER but it just get into regular recovery...)
Click to expand...
Click to collapse
flash darkyrom 10.2 Resurrection edition using odin.. this will give you a GB rom with root
flash CM10 through CWM recovery
reboot.. (you may not be able to boot as of now)
go to CWM recovery again using 3 button combo
flash CM10 again
reboot
this should do the trick
THANK YOU TWO
the Darkys rom 10.2 re was great --- it starts now hahah
i Will try now another rom (not cyagonmod but PilotX)
thank you very muchhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
Hi all,
give some information first.... at the beginning, i used rom manager to flash clockwork recovery 6.0.1.2, later i hv flashed cm10.1 rom, but i found that the resolution has some problem, so i want to flash back to stock rom... And then i go to this site http://forum.xda-developers.com/showthread.php?t=1901191, to install PhilZ-cwm6 (which is safer for installing stock rom?? i dont know).... After i hv applied the zip in the recovery mode, i found that i cant boot into the system (btw i hv wipe data and cache)
besides, i hv tried odin v1.87, but my pc cant connect with my phone (in download mode)...
what can i do Is my phone bricked?
Sorry for my poor English.
Thank You Guys!!
Problem fixed!!
after i hv installed samsung kies, odin can detect my phone!
Everything is fine now!:laugh:
kclam730 said:
Hi all,
give some information first.... at the beginning, i used rom manager to flash clockwork recovery 6.0.1.2, later i hv flashed cm10.1 rom, but i found that the resolution has some problem, so i want to flash back to stock rom... And then i go to this site http://forum.xda-developers.com/showthread.php?t=1901191, to install PhilZ-cwm6 (which is safer for installing stock rom?? i dont know).... After i hv applied the zip in the recovery mode, i found that i cant boot into the system (btw i hv wipe data and cache)
besides, i hv tried odin v1.87, but my pc cant connect with my phone (in download mode)...
what can i do Is my phone bricked?
Sorry for my poor English.
Thank You Guys!!
Click to expand...
Click to collapse
For the future:
Philz kernel is used for TouchWiz ROM's (based off what samsung gives us). You flashed a TW kernel onto a CM 10.1 ROM. If you still want to try out CM, then boot into recovery, do a full wipe, flash CM and gapps. After that is done perform a data wipe (factory reset) through recovery
I am new here and i have Galaxy Note with Stock ICS 4.0.3 (Indian).
and i want to flash PA 3.+ on it.
for that pupose, i have flashed latest Phils Root+CWM6 which is
<< 12.05.2013 - PhilZ-cwm6 v5.03.0 with CWM 6.0.3.2 based recovery >>
DDLSC - DXLSE - JPLSB - XXLT5 - ZSLO2 Fixed for bootloop
ZCLSF (no bootloop fix, proper default.prop)
Click to expand...
Click to collapse
after flashing it from Stock Recovery, phone is getting stuck at BootLogo.
but the phone is getting boot into CWM, but cant able to flash to flash PA, showing error and also my i am unable to boot into stock system.
so please help me and give me solution for this.
i am a newbie and theres a lots of kernels, codes, recoveries n roms which makes me confused..
ajay0ajay0 said:
I am new here and i have Galaxy Note with Stock ICS 4.0.3 (Indian).
and i want to flash PA 3.+ on it.
for that pupose, i have flashed latest Phils Root+CWM6 which is
after flashing it from Stock Recovery, phone is getting stuck at BootLogo.
but the phone is getting boot into CWM, but cant able to flash to flash PA, showing error and also my i am unable to boot into stock system.
so please help me and give me solution for this.
i am a newbie and theres a lots of kernels, codes, recoveries n roms which makes me confused..
Click to expand...
Click to collapse
I faced a similar problem yesterday.
First of all go back to CWM, wipe cache and dalvik, then go to mounts and storage and mount system, sd card, preload, cache, sd-ext, don't touch emmc.
After that go to ADVANCED and fix permissions. Then wipe cache and dalvik again.
It worked for me.
Let me know the results.
ajay0ajay0 said:
I am new here and i have Galaxy Note with Stock ICS 4.0.3 (Indian).
and i want to flash PA 3.+ on it.
for that pupose, i have flashed latest Phils Root+CWM6 which is
after flashing it from Stock Recovery, phone is getting stuck at BootLogo.
but the phone is getting boot into CWM, but cant able to flash to flash PA, showing error and also my i am unable to boot into stock system.
so please help me and give me solution for this.
i am a newbie and theres a lots of kernels, codes, recoveries n roms which makes me confused..
Click to expand...
Click to collapse
You are flashing a JB kernel on an ICS rom. That is why you get stuck. What you can actually do is the following:
- Put PA in your sdcard (internal or external)
- Reflash Philz Kernel and go to advance and reboot recovery (not device)
- From that touch recovery flash PA and GAPPS.
If not, find Philz file for your build version and everything will be just fine.
yes you're flashing jb kernel on ics. please read the instructions on the kernel thread before you flash it.
guys i hav a n7000 wit official jb rom and rooted ...usaully i dnt play wit software or do any experiments ...after a low battery charge shut down ...i could not on my phone ..evn after putting on charge or after full charge o anythng like that..it just stuck up in samsung logo ...i hav tried wit clear wipe cache in the official recovery and restarts or reboots several times but it does not /..plese help me guys ..plz ...asap ...
Download kernel only, rom and gapps from bauner. Put into your sdcard. Then flash the kernel, after you flash kernel then reboot into recovery. Then flash rom and gapps, now you will have lollipop.
I had this problem too before.
Sent from my GT-N7000
Hi
Running LineageOS on my X527, with TWRP.
Wanna return to stock.
In Fastboot mode, i flashed stock recovery.
Then, i flashed official update.zip (with cleared cache)
When rebooting, nothing happens, stuck on boot logo.
Help please...
Install ycjasens twrp recovery (i dont have the link so u have to find it) ... Factory reset ( just factory reset)...install stock rom. After installing stock Install the andromax 2.0 karnel (Eui version) which u can find in roms n karnels thread ... Then reboot device...... Done..
(If u r having problem to install andromax karnel in ycjasens recovery then install normal twrp from ycjasens n install the karnel)
Is it so difficult to return to stock ? (16S, 19S, i don't care)
Stuck at leeco boot logo
I flashed stock recovery,
Then installed the 5.9.0.21S
Now stuck at boot logo
Tried formating phone.
But nothing happened
Dont want to flash twrp. Plz help
luminouche said:
Is it so difficult to return to stock ? (16S, 19S, i don't care)
Click to expand...
Click to collapse
I had same issue before.. My fon got frozen at leeco screen .. But after flashing stock i flashed andromax karnel through twrp..n finally it booted... So give it a shot... Maybe it'll work for u too..
Solved
Refer this thread for returning to full stock, without installing any kernel, andromodx kernal install kernel auditor and replàces stock kernel.
https://forum.xda-developers.com/le-2/development/fixed-le2-x526-bootloop-flashing-stock-t3740236