I installed a rom and try to go back to the stock firmware and accidentally erase the os. the only thing i have on it is this custom recovery: [RECOVERY][TWRP] null_ 03 TWRP :: 28th NOV :: GEAR EDITION [BETA][VRTHEME]
if any one could help that would be great
That's no biggy. Just transfer a copy of null onto your watch via pc using adb and flash the Rom through twrp.
Related
Hi
I have a GS3 i9305T. I can install and run any official rom without any problem up to 4.4.4. but when i install TWRP and then install any by any I mean every single custom rom on android 5.x.x it will just show the boot logo of CyanogenMod or nameless or any other one! nothing after that!
What i have tried is
Done factory reset before installing, Done after that, or didnt even do that.
installed rom with Gapps and without gapps
installed a fresh Stock rom and then installed the custom roms
tried couple of different Kernels as below
3 Jun 2015] [AGNi][CM] 03-06-2015 AGNi pureCM v4.4.5 I9305 (ULTRA SMOOTH)
[20 Apr 2015] [AOSP] [ArchiToolchain] [14/04/15] ArchiKernel V2.X
[21 Mar 2015] [CM12.0] Boeffla 3.0-alpha10 - 21.03.2015
[02 Feb 2015] HboKernel v0.3 - 02.02.2015 (NamelessRom 5.0)
I have done everything that i could so please as you know my problem is not the factory reset! please advise me what should i do?
did you install twrp 2.8.7.0? If yes, that one is faulty. Flash stock rom again, flash 2.8.5.0 and everything is working.
I have installed the rom using TWRP 3different version, Philz recovery, CWM none work!
you didn't answer my question though.
Hello shamid202,
please use this odin-flashable Recovery:
openrecovery-twrp-2.8.7.0-alpha17-i9305.tar
problem is data part format should be changed.
shamid202 said:
problem is data part format should be changed.
Click to expand...
Click to collapse
I have exactly the same problem, I try to flash SlimLP is booting but stuck on rom boot logo. I try to flash PAC rom same issue.
I use twrp 2.8.7.0 and openrecovery-twrp-2.8.7.0-alpha17-i9305.
@shamid202 do you have resolved the issue ?
Solved for me
After having problem with weird usb cable, I finally success to install SlimLP F2FS Rom with this procedure:
Flash TWRP VERSION 2.8.5.0 recovery with heimdall (or odin) heimdall --RECOVERY twrp2.8.5.0.img --no-reboot
Reboot in recovery mode
Flash from recovery Twrp openrecovery 2.8.7.0 alpha17 zip
Reboot in recovery mode
Go to Wipe/advanced and format /system /cache /data partitions to F2FS
Then finally flash SlimLP F2FS ROM zip
Twrp 2.8.7.0 work but I was unable to flash alpha17 after installing this version ...
Recovery Thread http://forum.xda-developers.com/gal...covery-i9305-cwm-philz-twrp-versions-t2694249
Long time ago, I switched to CM12.1, and I figured I would give a try to CarbonROM (Lineage = CM's successor and I used CM and didn't like it much, omnirom = too new and probably buggy, carbonrom = still maintained and "older").
Here's what I did so far:
- downgraded to 23.0.A.2.93 (4.4.4) (flashed ftf with flashtool)
- rooted it using giefroot 3.1
- installed twrp using another tool with an installer (http://nut.xperia-files.com/)
- then upgraded to pre-rooted version of .291 D5803_23.5.A.1.291_1289-7524_R5D_PreRooted_RecRoot_v4_SuperSU_276.zip, which comes with TWRP 3.0.2.0 (did that using twrp I had just installed)
Then my plan was to upgrade directly to CarbonRom by flashing from TWRP, but it gives me the error 7, so I figured I'd just upgrade TWRP but:
- tried upgrading TWRP (followed instructions here:https://forum.xda-developers.com/z3-compact/general/d5803-z3c-aries-twrp3-0-t3543113), using lineage or omni recovery: will flash "successfully" with fastboot, but when I actually go into recovery mode it's the same old twrp version
- tried flashing the img directly from old twrp version, both recoveries, and same results: when I reboot to recovery, it's the same old version.
I'm therefore stuck right now and can't figure out what I'm doing wrong, nor how I could work around this issue.
Installed twrp 3.1.1 from zip, which allowed me to install Carbon.
Still trying to figure out why flashing didn't work, and why the zip did. Anybody can tell me?
Edit: phone is a D5803. unlocked bootloader, TA partition backed up (just in case), i have latest flashtool, drivers are installed, I know how to go into fastboot, I know how to flash a zip...
Try to flash FOTAKernel instead of recovery
Example:
Code:
fastboot.exe flash FOTAKernel "recovery-Lineage 14.1.img"
I found an easy and convenient way to flash Huawei updates when twrp is installed. No data loss. In my case I updated from June to July patch without any hiccups.
1. Download the HWOTA8 folder zip to your device and extract it to the root of your SD card. I provided the link at the bottom of the tutorial.
2. Download the Huawei update and wait till it finished.
3. Boot to twrp and go straight to the HWOTA8 folder.
4. Now install the hwota8_update.zip, this will install a special no check version of the stock recovery.
5. After reboot you'll see a failed update attempt, ignore the message and boot to system.
6. Now that we have the stock recovery you can go straight to the update app in the settings and install the update.
7. After 5 minutes the update should be finished and the device will boot to system.
8. The bootloader will be still unlocked so you can modify again with twrp, magisk and so on. No data loss.
Download
https://mega.nz/#!7AxVwBBZ!W9YyQ7qSAxZo-px8xYR18rBIhycKlqOhS4n8ogTioaI
gude, tried this today to upgrade P10plus from .382 to .385. worked as promissed. afterwards just installed the TWRP and magisk to get back root. thx
Dear Sir,
Thank you for the clear and concise method for flashing stock updates when TWRP is installed.
Please help me with instructions how to upgrade my unlocked, rooted and TWRP installed Android 7 ROM to OREO.
My phone model number is: VKY-L09
Build number: VKY-L09C02B102
EMUI version: 5.1
Android: 7.0
Kernel: 4.1.18-gfd75bb
TWRP: 3.1.0-0
there is only one thing that makes me wonder: i cannot install a differential update, this always fails, so the complete package will download ( almost 3GB ), then the installation will be successful. any idea why?
Running the version from November 2020 i want install the new one, my phone is unlocked, recovery TWRP . i download the firmware zip file from Asus web can i install using the recovery TWRP
I have been working on this for 3 days now finally got adb root and dumped the stock rom img files. they are from a factory fresh update
wont let me upload sys.img so heres that https://www.dropbox.com/s/72voxpc3mv52ors/sprat6.0.1system.img?dl=0
More to update soon....
working on:
TWRP
Magisk root
Custom ROM