[Q] Need help figuring out how to update - One (M7) Q&A, Help & Troubleshooting

I have an ATT M7. I am on T-Mobile. The phone is now unlocked. It is still running Android 4.3.
ATT software update doesn't find any updates - presumably because I need an ATT sim in there.
So how can I upgrade this to 4.4 and later 5.0?
Thanks!

808phone said:
I have an ATT M7. I am on T-Mobile. The phone is now unlocked. It is still running Android 4.3.
ATT software update doesn't find any updates - presumably because I need an ATT sim in there.
So how can I upgrade this to 4.4 and later 5.0?
Thanks!
Click to expand...
Click to collapse
post your fastboot getvar all please without imei and serial number

808phone said:
I have an ATT M7. I am on T-Mobile. The phone is now unlocked. It is still running Android 4.3.
ATT software update doesn't find any updates - presumably because I need an ATT sim in there.
So how can I upgrade this to 4.4 and later 5.0?
Thanks!
Click to expand...
Click to collapse
convert the phone to Developers Edition
http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
http://forum.xda-developers.com/htc-one/general/stock-rom-reset-developer-edition-t2915170
Thanks @alray

So I did more reading and yes developer edition or change CID and MID to T-Mobile
All require S-OFF.
So I need to unlock boot loader, install TWRP, S-OFF. etc?
This is the blue Best Buy version ATT - but ATT just unlocked it.
M7_UL PVT SHIP S-ON RH
HBOOT 1.55
Radio-4T.20.3218.13

808phone said:
So I did more reading and yes developer edition or change CID and MID to T-Mobile
All require S-OFF.
So I need to unlock boot loader, install TWRP, S-OFF. etc?
This is the blue Best Buy version ATT - but ATT just unlocked it.
M7_UL PVT SHIP S-ON RH
HBOOT 1.55
Radio-4T.20.3218.13
Click to expand...
Click to collapse
thats why I asked for your fastboot getvar all, unlock your bootloader and use rumrunner to s-off, do not take any updates until you get s-off as it gets harder the higher HBOOT you have.

Seanie280672 said:
thats why I asked for your fastboot getvar all, unlock your bootloader and use rumrunner to s-off, do not take any updates until you get s-off as it gets harder the higher HBOOT you have.
Click to expand...
Click to collapse
S-OFF now by using sunshine. I do have ADB and Fastboot working from my previous use with HTC One S.

808phone said:
OK, I believe I am S-OFF, just used sunshine.
Click to expand...
Click to collapse
well from there you can either follow clsA link and change to developer edition, which will require changing cid, mid and flash the RUU, dev edition gets the quickest updates, although its very touch and go at the moment as to whether the M7 is going to get anymore updates, or you can do the same with the latest T-mo RUU which is here: http://www.htc.com/us/support/htc-one-t-mobile/news/ that will also require you to change your cid and mid, after doing that follow the manual instructions on the HTC site, download link for the RUU is at the bottom.

Thanks!

Seanie280672 said:
well from there you can either follow clsA link and change to developer edition, which will require changing cid, mid and flash the RUU, dev edition gets the quickest updates, although its very touch and go at the moment as to whether the M7 is going to get anymore updates, or you can do the same with the latest T-mo RUU which is here: http://www.htc.com/us/support/htc-one-t-mobile/news/ that will also require you to change your cid and mid, after doing that follow the manual instructions on the HTC site, download link for the RUU is at the bottom.
Click to expand...
Click to collapse
808phone said:
Thanks!
Click to expand...
Click to collapse
at&t phones already have the required MID to flash the dev edition ruu (pn0712000) Only need to change the cid

alray said:
at&t phones already have the required MID to flash the dev edition ruu (pn0712000) Only need to change the cid
Click to expand...
Click to collapse
Darn it. Read this too late. OK, I changed CID to T-MOB010 and MID to PN0713000.
At this point, do I just run an RUU at some point? Hope it works.

808phone said:
Darn it. Read this too late. OK, I changed CID to T-MOB010 and MID to PN0713000.
At this point, do I just run an RUU at some point? Hope it works.
Click to expand...
Click to collapse
Yes this one >> http://www.htc.com/us/support/htc-one-t-mobile/news/

clsA said:
Yes this one >> http://www.htc.com/us/support/htc-one-t-mobile/news/
Click to expand...
Click to collapse
I used Sunshine to get S-OFF. Everywhere I read, it says I need to have the boot loader locked to apply the RUU. However, while contacting the sunshine authors, they told me that despite what I have read, I don't have to relock. Is this true?

808phone said:
I used Sunshine to get S-OFF. Everywhere I read, it says I need to have the boot loader locked to apply the RUU. However, while contacting the sunshine authors, they told me that despite what I have read, I don't have to relock. Is this true?
Click to expand...
Click to collapse
no you dont need to lock as your s-off, unlocked is fine.
locked / relocked for flashing firmware or RUU's is only required for s-on users and limited to 1 step forward or current only.

So now the ruu times out on sending.......
So I extracted the rom.zip. If I flash it from twrp since it has a recovery image in it, will it overwrite twrp?
I'm assuming yes and then I would have to fast boot twrp back again.
Is this correct? Thanks

Gave up and installed Maximus HD. Works fine. Just wanted to be on 5.0 to test things.

808phone said:
Gave up and installed Maximus HD. Works fine. Just wanted to be on 5.0 to test things.
Click to expand...
Click to collapse
Anyone know what the first part of this means? (unaligned ruu)
Where would I get this????
> Use an unaligned ruu or a matching hboot ruu

Related

S-Off Definitive answer needed.

My device is natively 1.28.61.7 cid ORANG001 (UK EE/Orange/T-Mobile) although my bootloader is unlocked and I have been running custom software since I got it.
I have successfully s-offed my device with revone, removed the tampered warning and set super cid just with the fastboot method.
My question is...Can I permanently 'debrand' my device and continually receive and install stock updates by
1 Changing my cid to HTC__001 by the fastboot method.
2 Running a 1.2x.401.x RUU
3 Receive and install ota updates.
Will this scenario work as I have seen many conflicting answers on this forum and, if yes, do I need my bootloader locked or unlocked??
Also, if this scenario proves to be successful, where would it leave me if a subsequent ota update closes the s-off loophole??
Any informed assistance would me much appreciated.
To completely debrand:
S-OFF
Supercid
Flash a unbranded RUU
change your cid to HTC_001( or one you want)
You will receive OTA and all you need
erto90 said:
To completely debrand:
S-OFF
Supercid
Flash a unbranded RUU
change your cid to HTC_001( or one you want)
You will receive OTA and all you need
Click to expand...
Click to collapse
Thanks for your quick answer!
Have you tried this?
Bootloader locked or unlocked?
bobsie41 said:
Thanks for your quick answer!
Have you tried this?
Bootloader locked or unlocked?
Click to expand...
Click to collapse
Bootloader has to be locked or relocked
bobsie41 said:
Thanks for your quick answer!
Have you tried this?
Bootloader locked or unlocked?
Click to expand...
Click to collapse
yup tried with my friend's phone, unlocked bootloader before and after :good:
erto90 said:
yup tried with my friend's phone, unlocked bootloader before and after :good:
Click to expand...
Click to collapse
......so I change cid to HTC__001 , lock bootloader run RUU 1.2x.401.xx then update, update..for evermore stock unbranded????
Would just like to be certain
bobsie41 said:
......so I change cid to HTC__001 , lock bootloader run RUU 1.2x.401.xx then update, update..for evermore stock unbranded????
Would just like to be certain
Click to expand...
Click to collapse
you DO NOT need to lock bootloader
it can stay unlocked
and you NEED supercid to flash the RUU
after flashed RUU, change you cid to HTC_001
erto90 said:
you DO NOT need to lock bootloader
it can stay unlocked
and you NEED supercid to flash the RUU
after flashed RUU, change you cid to HTC_001
Click to expand...
Click to collapse
Even to apply ota?
bobsie41 said:
Even to apply ota?
Click to expand...
Click to collapse
to apply ota you can be locked or unlocked.. is the same
erto90 said:
you DO NOT need to lock bootloader
it can stay unlocked
and you NEED supercid to flash the RUU
after flashed RUU, change you cid to HTC_001
Click to expand...
Click to collapse
It's HTC__001, not HTC_001 - the double underscore is essential
EddyOS said:
It's HTC__001, not HTC_001 - the double underscore is essential
Click to expand...
Click to collapse
is changing the CID purely for official OTA's?
I really dont get it if youre running a ROM. heh
EddyOS said:
It's HTC__001, not HTC_001 - the double underscore is essential
Click to expand...
Click to collapse
yup sorry, knew that, typo error:angel:
kazemitsui said:
is changing the CID purely for official OTA's?
I really dont get it if youre running a ROM. heh
Click to expand...
Click to collapse
If you're on a custom ROM then you don't need to change your CID. It's only if running stock is it important
bobsie41 said:
Even to apply ota?
Click to expand...
Click to collapse
With Supercid you can't receive Official OTAs, so you have to set your cid to the One that receives updates First! for example, if your hear updates start rolling out in France for the french CID HTC_203, you just have to change your cid to HTC_203 and update via OTA, even if bootloader is unlocked, the most important for official updates is the CID!
If you're going to put supercid, that allow you to rom/firmware/ruu independantely from the CID, but not automatic official updates, just manual ones via recovery or fastboot (ruu).
Hope it clears out things
Regards
So quick question, I also have a Orange handset running 1.28.61.7... did you manage to S-off your device? ?
Just all i can see is there is no S-off for this software variant... please help.
Although when the device has a different model ID then the OTA will not install.
For example if your device has MID PN0714000 and you are trying to install OTA update 1.29.401.X then it will fail.
dobknobby said:
So quick question, I also have a Orange handset running 1.28.61.7... did you manage to S-off your device? ?
Just all i can see is there is no S-off for this software variant... please help.
Click to expand...
Click to collapse
The software variant your running does not matter.
What matters is the CID and the MID.
I've posted the sections you need to read in the thread you opened.

[Q] HTC One debranding

Hi all, just wondering if someone with some knowledge can help assist me debranding my HTC One. I came from Samsung devices, and knew the ins and outs of rooting, flashing roms etc, but HTC devices seems so over complicated after reading through various forums.
All I want to do is debrand my Vodafone HTC One, and install the international uk firmware, and be able to receive ota updates in future.
I have been reading about changing Ruu, changing CID, and im just baffled by everything, although slowly starting to gain some knowledge.
Please I would appreciate if someone could give me the correct procedure to do this, do I need to unlock the bootloader before doing it? Already registered on HTCDEV website, just havnt unlocked bootloader yet.
I have spent hours reading info, and my head is practically going round in circles lol.
What do you mean by debranding? Do you mean putting a custom Rom on it?
Edit: I missed a section of what you said. I believe you have to unlock the bootloader, turn security off, and get Super CID.
Sent from my HTCONE using xda premium
Sent from my SPH-L900 using xda app-developers app
Thank you, So I need to unlock bootloader, get s-off, then install supercid. Then all I do is install the international stock rom? and I will receive ota updates?
I believe so, but you must have the international stock recovery on too for the OTA updates to work.
Sent from my HTCONE using xda premium
honda1979 said:
Hi all, just wondering if someone with some knowledge can help assist me debranding my HTC One. I came from Samsung devices, and knew the ins and outs of rooting, flashing roms etc, but HTC devices seems so over complicated after reading through various forums.
All I want to do is debrand my Vodafone HTC One, and install the international uk firmware, and be able to receive ota updates in future.
I have been reading about changing Ruu, changing CID, and im just baffled by everything, although slowly starting to gain some knowledge.
Please I would appreciate if someone could give me the correct procedure to do this, do I need to unlock the bootloader before doing it? Already registered on HTCDEV website, just havnt unlocked bootloader yet.
I have spent hours reading info, and my head is practically going round in circles lol.
Click to expand...
Click to collapse
All the following is dependant on having an hboot of less than 1.54. If you are already on hboot 1.54, you will not yet be able to s-off and follow this process until an exploit is found for the 1.54 hboot. To check this, turn off your device and restart it whilst holding the volume down button. The information will be displayed.
1 Get S-Off http://forum.xda-developers.com/showthread.php?t=2314582
2 Install super cid : fastboot oem writecid 11111111
3 Run RUU 1.28.401.7 http://forum.xda-developers.com/showthread.php?t=2207874
4 Change cid to generic : fastboot oem writecid HTC__001
You will now receive ota updates to 2.24.401.1
honda1979 said:
Thank you, So I need to unlock bootloader, get s-off, then install supercid. Then all I do is install the international stock rom? and I will receive ota updates?
Click to expand...
Click to collapse
Run revone, unlocked bootloader and s-off
change CID to HTC__001 or 11111111
run RUU for international M7 i would start with PN07IMG_M7_UL_JB_50_HTC_Europe_1.29.401.16_R_Radio_4A.14.3250.13_10.33.1150.01_release_318486_signed_2_4
once this is on the phone you should get all the OTA releases bringing you up to date.
bobsie41 said:
All the following is dependant on having an hboot of less than 1.54. If you are already on hboot 1.54, you will not yet be able to s-off and follow this process until an exploit is found for the 1.54 hboot. To check this, turn off your device and restart it whilst holding the volume down button. The information will be displayed.
1 Get S-Off http://forum.xda-developers.com/showthread.php?t=2314582
2 Install super cid : fastboot oem writecid 11111111
3 Run RUU 1.28.401.7 http://forum.xda-developers.com/showthread.php?t=2207874
4 Change cid to generic : fastboot oem writecid HTC__001
You will now receive ota updates to 2.24.401.1
Click to expand...
Click to collapse
Thanks for that info mate. I just checked and im on hboot 1.54, which means I wont be able to do this at the moment. Was that RUU you state an exe file? I guess I don't have to root or install any custom recovery to do this? First I need to wait on an exploit for sboot 1.54 to get s-off. Also it might be easier for me going down the custom rom route?
honda1979 said:
Thanks for that info mate. I just checked and im on hboot 1.54, which means I wont be able to do this at the moment. Was that RUU you state an exe file? I guess I don't have to root or install any custom recovery to do this? First I need to wait on an exploit for sboot 1.54 to get s-off. Also it might be easier for me going down the custom rom route?
Click to expand...
Click to collapse
Until s-off is achieved for hboot 1.54, your only choice is custom roms. This should be fine as you are already updated to the latest firmware through Vodafone.
Sent from my HTC One using xda premium
bobsie41 said:
Until s-off is achieved for hboot 1.54, your only choice is custom roms. This should be fine as you are already updated to the latest firmware through Vodafone.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Ok cheers. I thought that I needed to be S-Off before I could install any custom rom, but I could root and install custom recovery with s-on?
honda1979 said:
Ok cheers. I thought that I needed to be S-Off before I could install any custom rom, but I could root and install custom recovery with s-on?
Click to expand...
Click to collapse
Yes
needbyna mechanism
bobsie41 said:
Yes
Click to expand...
Click to collapse
Ok, now here goes lol. My understanding so far is that in order to install any stock ruu I must first get s-off. As im running stock Vodafone firmware, the CID must match this firmware. If I get s-off, I will be able to install any CID and stock rom, as long as they match one another. and as im on hboot 1.54 just now, supercid wont work yet, so s-off is a no no at the moment. I can still root and install a custom firmware though.

Can I install a Google Edition RUU in a HTC Developer Edition device?

I found the RUU in http : / / www . htcdev.com/devcenter/downloads and tought if is possible do it.
Regards
only if your s-off
Victor Potasso said:
I found the RUU in http : / / www . htcdev.com/devcenter/downloads and tought if is possible do it.
Regards
Click to expand...
Click to collapse
Like I said in your previous thread http://forum.xda-developers.com/showthread.php?t=2552669
You might want to read this: http://forum.xda-developers.com/showthread.php?t=2541082
If you read, then you will understand that the RUU you want to execute need to be compatible with both your CID, MID and hboot version.
So yes its possible, but you need to be s-off to change CID/MID and to downgrade hboot if required.
and please don't start 2 different threads for relatively the same questions.
Hope it help
alray said:
Like I said in your previous thread http://forum.xda-developers.com/showthread.php?t=2552669
You might want to read this: http://forum.xda-developers.com/showthread.php?t=2541082
If you read, then you will understand that the RUU you want to execute need to be compatible with both your CID, MID and hboot version.
So yes its possible, but you need to be s-off to change CID/MID and to downgrade hboot if required.
and please don't start 2 different threads for relatively the same questions.
Hope it help
Click to expand...
Click to collapse
Can I set my device to s-off?
Victor Potasso said:
Can I set my device to s-off?
Click to expand...
Click to collapse
yes, use revone tool for hboot 1.44 or use rumrunner tool for hboot 1.54 and 1.55
This is the first thing listed in the thread I linked above.....
First you need to be S-Off, this will NOT work with S-On!!!
A) If you’re on hboot 1.44 use revone to get S-Off: http://forum.xda-developers.com/show....php?t=2314582
B) If you’re on hboot 1.54/1.55 use rumrunner to get S-Off: http://rumrunner.us/ and http://forum.xda-developers.com/show....php?t=2487888
Click to expand...
Click to collapse
---------- Post added at 02:38 AM ---------- Previous post was at 02:31 AM ----------
if you need to change cid:
Code:
fastboot oem writecid GOOGL01
where ''GOOGL01'' is the GPE cid
If you need to change MID:
http://forum.xda-developers.com/showthread.php?t=2322820
alray said:
yes, use revone tool for hboot 1.44 or use rumrunner tool for hboot 1.54 and 1.55
This is the first thing listed in the thread I linked above.....
---------- Post added at 02:38 AM ---------- Previous post was at 02:31 AM ----------
if you need to change cid:
Code:
fastboot oem writecid GOOGL01
where ''GOOGL01'' is the GPE cid
If you need to change MID:
http://forum.xda-developers.com/showthread.php?t=2322820
Click to expand...
Click to collapse
My hboot is 1.55 and I tried rumrunner but It got unsuccess. It stops when chilling... Do u think it happens because I have to change my MID
Victor Potasso said:
My hboot is 1.55 and I tried rumrunner but It got unsuccess. It stops when chilling... Do u think it happens because I have to change my MID
Click to expand...
Click to collapse
I can't answer that cause I'm not familiar with rumrunner since I s-off'd my One when it was on 1.44 hboot with revone. In theory rumrunner 0.5.0 should work on all international variant with hboot 1.54 and up except verizon model that need a different version of rumrunner. Maybe you should ask help directly on rumrunner thread for that step or search the forum for similar issue with s-off on 1.55. Hope you will find out.
alray said:
I can't answer that cause I'm not familiar with rumrunner since I s-off'd my One when it was on 1.44 hboot with revone. In theory rumrunner 0.5.0 should work on all international variant with hboot 1.54 and up except verizon model that need a different version of rumrunner. Maybe you should ask help directly on rumrunner thread for that step or search the forum for similar issue with s-off on 1.55. Hope you will find out.
Click to expand...
Click to collapse
Thanks mate, but I can't because I just Signed Up. I Can't write something in that threads yet :crying:
Cheers mate
Victor Potasso said:
Thanks mate, but I can't because I just Signed Up. I Can't write something in that threads yet :crying:
Cheers mate
Click to expand...
Click to collapse
I went back and forth with rumrunner and moonshine while using a rom 4.3 GPE ROM with twrp and it kept failing. ultimately installed a 4.1.2 stock then used revone and it worked wonderfully. I was able to remove the tampered flag, unlock the stock bootloader and flash the GPE 4.3 and receive the updates. I also only have a mac so i was limited in not being able to run .exe's.
swag1981 said:
I went back and forth with rumrunner and moonshine while using a rom 4.3 GPE ROM with twrp and it kept failing. ultimately installed a 4.1.2 stock then used revone and it worked wonderfully. I was able to remove the tampered flag, unlock the stock bootloader and flash the GPE 4.3 and receive the updates. I also only have a mac so i was limited in not being able to run .exe's.
Click to expand...
Click to collapse
I'm using Parallels Desktop as Virtual Machine. I use to run Win8 and Ubuntu with it. It works very well.
:good: w w w . parallels.com/products/desktop/
Sorry mate, I'm a bit noob. I got the TAMPERED FLAG when I tried to get S-OFF with rumrunner. What does it means?
I tried moonshine as well but it doesn't start
I've tried to get 4.1.2 stock as well but my device has to be S-OFF :crying:
Regards
Victor Potasso said:
I'm using Parallels Desktop as Virtual Machine. I use to run Win8 and Ubuntu with it. It works very well.
:good: w w w . parallels.com/products/desktop/
Sorry mate, I'm a bit noob. I got the TAMPERED FLAG when I tried to get S-OFF with rumrunner. What does it means?
I tried moonshine as well but it doesn't start
I've tried to get 4.1.2 stock as well but my device has to be S-OFF :crying:
Regards
Click to expand...
Click to collapse
Tampered flag is just that, a flag. It doesnt hinder anything, just a pop up for "Warranty" purposes. The flag pops up when you unlock the bootloader but when you get S-Off you can remove the flag.
Since you have access to windows i would go to http://forum.xda-developers.com/showthread.php?t=2428276 and find the .exe RUU for your area. Just get into your bootloader, select fastboot usb and run the .exe. Pick the lowest firmware available so you can ensure that you get the 1.44 hboot.
swag1981 said:
Tampered flag is just that, a flag. It doesnt hinder anything, just a pop up for "Warranty" purposes. The flag pops up when you unlock the bootloader but when you get S-Off you can remove the flag.
Since you have access to windows i would go to http://forum.xda-developers.com/showthread.php?t=2428276 and find the .exe RUU for your area. Just get into your bootloader, select fastboot usb and run the .exe. Pick the lowest firmware available so you can ensure that you get the 1.44 hboot.
Click to expand...
Click to collapse
swag1981 my hboot is 1.55
Is the process with .zip and .exe different? Maybe if I run .exe it can work with S-ON? :victory:
Victor Potasso said:
swag1981 my hboot is 1.55
Is the process with .zip and .exe different? Maybe if I run .exe it can work with S-ON? :victory:
Click to expand...
Click to collapse
The zip can only be used with S-Off where as the exe is designed to be used to return a phone to stock with S-On.
Just get into fastboot and run the exe, it should do the rest for you. It will wipe the entire phone, but as far as I'm concerned, a blank phone is better than an unusable one.
I'm not sure if the hboot makes a difference, but mine downgraded when I flashed an older RUU.
Once you get the older hboot and firmware, you may have to unlock your bootloader again through HTC Dev, then S-Off. Once your S-Off unlocking your bootloader is much easier.
Sent from my HTC One using Tapatalk
Whoo ho! Nice mate. I wanna to get it.
I'll try this soon. Thanks again mate. You've been helping me a lot.
Cheers
Whoo ho! Nice mate. I wanna to get it.
I'll try this soon. Thanks again mate. You've been helping me a lot.
:cheers:
Give this site a read over too when you get a chance http://www.htc1guru.com/downloads/
Sent from my HTC One using Tapatalk
swag1981 said:
The zip can only be used with S-Off where as the exe is designed to be used to return a phone to stock with S-On.
Just get into fastboot and run the exe, it should do the rest for you. It will wipe the entire phone, but as far as I'm concerned, a blank phone is better than an unusable one.
I'm not sure if the hboot makes a difference, but mine downgraded when I flashed an older RUU.
Once you get the older hboot and firmware, you may have to unlock your bootloader again through HTC Dev, then S-Off. Once your S-Off unlocking your bootloader is much easier.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
If you want to run a GPE RUU.exe your phone MUST have CID compatible (BS_US0001) with GPE and MID: PN0712000
you can check that with this command:
Code:
fastboot oem readcid
fastboot oem readmid
if they doesn't match, you MUST be S-OFF to change them
If your device is currently a DEV edition, you should already have PN0712000 as MID so the only concern is that CID need to match GPE RUU
You should post your
Code:
fastboot getvar-all
and remove imei and sn so it will be easier to see what options you have.
swag1981 said:
The zip can only be used with S-Off where as the exe is designed to be used to return a phone to stock with S-On.
Just get into fastboot and run the exe, it should do the rest for you. It will wipe the entire phone, but as far as I'm concerned, a blank phone is better than an unusable one.
I'm not sure if the hboot makes a difference, but mine downgraded when I flashed an older RUU.
Once you get the older hboot and firmware, you may have to unlock your bootloader again through HTC Dev, then S-Off. Once your S-Off unlocking your bootloader is much easier.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I just tried run this .exe but I got this error http://imgur.com/rYvIdBd
I downloaded RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe but my current ROM is Android 4.3 version 3.22.1540.1. I suppose I got this error because I tried to install a oldest version in my device. Does it make any ****ing sense?
I'm downloading the .exe for 3.22.1540.1 and than try to install it.
Regards
alray said:
If you want to run a GPE RUU.exe your phone MUST have CID compatible (BS_US0001) with GPE and MID: PN0712000
you can check that with this command:
Code:
fastboot oem readcid
fastboot oem readmid
if they doesn't match, you MUST be S-OFF to change them
If your device is currently a DEV edition, you should already have PN0712000 as MID so the only concern is that CID need to match GPE RUU
You should post your
Code:
fastboot getvar-all
and remove imei and sn so it will be easier to see what options you have.
Click to expand...
Click to collapse
Yep, my device has MID as PN0712000 and CID BS_US001
I tried run RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe from HTC1GURU byt i got this error http://imgur.com/rYvIdBd
My current software version is 3.22.1540.1.
@alray and @swag1981
I followed this thread http://forum.xda-developers.com/showthread.php?p=46046898
If I have a hboot S-ON it has to be LOCKED or RE-LOCKED. It'll never work with hboot UNLOCK. So if your hboot is S-OFF it not matter.
Thank u mates. You were friggin' awesome.
Regards

[Q] How to Debrand HTC One

I have a HTC One on the EE network in the UK and I am still currently on Android 4.3 and Sense 5.5, they haven't bothered to release Android 4.4 yet and I have no hope that they will release Sense 6.
So, I would like to know how to go about changing my EE branded phone into an Unlocked International Version so that I can receive OTA updates direct from HTC.
Current CID: ORANG001
Current Hboot: 1.55
Current Software Number: 3.63.61.1
Radio: 4A.21.3263.04
Locked Bootloader with S-On
I would very much appreciate any help you can give.
Thank-You
rh92 said:
I have a HTC One on the EE network in the UK and I am still currently on Android 4.3 and Sense 5.5, they haven't bothered to release Android 4.4 yet and I have no hope that they will release Sense 6.
So, I would like to know how to go about changing my EE branded phone into an Unlocked International Version so that I can receive OTA updates direct from HTC.
Current CID: ORANG001
Current Hboot: 1.55
Current Software Number: 3.63.61.1
Radio: 4A.21.3263.04
Locked Bootloader with S-On
I would very much appreciate any help you can give.
Thank-You
Click to expand...
Click to collapse
first of all you need to unlock your bootloader and s-off your phone, debrand is not possible with s=on
the you would need to change your cid to something like HTC__001 or developer edition cid, one fastboot command required to do this.
and then run the correct RUU for those cid's and your done.
its quite easy to do, the hardest part is getting s-off, however you may be ok on 1.55 hboot, try rumrunner, read the instructions and download the required file here: http://rumrunner.us/
Seanie280672 said:
first of all you need to unlock your bootloader and s-off your phone, debrand is not possible with s=on
the you would need to change your cid to something like HTC__001 or developer edition cid, one fastboot command required to do this.
and then run the correct RUU for those cid's and your done.
its quite easy to do, the hardest part is getting s-off, however you may be ok on 1.55 hboot, try rumrunner, read the instructions and download the required file here: http://rumrunner.us/
Click to expand...
Click to collapse
Do I need custom recovery? If so which is best.
And do I need to have a custom ROM installed to gain s-off or can s-off be achieved on my current EE branded ROM?
Thanks
rh92 said:
Do I need custom recovery? If so which is best.
And do I need to have a custom ROM installed to gain s-off or can s-off be achieved on my current EE branded ROM?
Thanks
Click to expand...
Click to collapse
nope its not required for either, you should be able to s-off on stock rom, if you get an error or for some reason it fails, then you MAY have to flash a custom recovery and custom rom / kernel.
The RUU's will put you back to fully stock anyway in the end.
Seanie280672 said:
nope its not required for either, you should be able to s-off on stock rom, if you get an error or for some reason it fails, then you MAY have to flash a custom recovery and custom rom / kernel.
The RUU's will put you back to fully stock anyway in the end.
Click to expand...
Click to collapse
If the s-off does cause an error or it fails, can this cause my device to get bricked?
And by fully stock do you mean that the RUU turns s-on and locks my boot loader? (just in case I need to send my phone in for repair).
Thanks
rh92 said:
If the s-off does cause an error or it fails, can this cause my device to get bricked?
And by fully stock do you mean that the RUU turns s-on and locks my boot loader? (just in case I need to send my phone in for repair).
Thanks
Click to expand...
Click to collapse
no your phone wont brick
and no the ruu wont turn your phone s-on, you will need to lock your bootloader before running the RUU, but that's one simple command too, but only after s-off.
all you need right now is to make sure you have the drivers installed and that your device is detected in windows both when booted into a rom and on the bootloader screen.
Seanie280672 said:
no your phone wont brick
and no the ruu wont turn your phone s-on, you will need to lock your bootloader before running the RUU, but that's one simple command too, but only after s-off.
all you need right now is to make sure you have the drivers installed and that your device is detected in windows both when booted into a rom and on the bootloader screen.
Click to expand...
Click to collapse
After installing the RUU how would I get s-on?
Thanks
rh92 said:
After installing the RUU how would I get s-on?
Thanks
Click to expand...
Click to collapse
don't s-on, never s-on simple as that.
Seanie280672 said:
don't s-on, never s-on simple as that.
Click to expand...
Click to collapse
Ok, I was just asking in case I needed to send my phone in for repair in the future.
rh92 said:
Ok, I was just asking in case I needed to send my phone in for repair in the future.
Click to expand...
Click to collapse
not really something they will check to be honest, but if you s-on and you've played about with your phone down the line, like flashed a modified firmware or hboot, you will get an instant brick, if your hboot version is too high you will get the tampered flag back, or if you make a mistake along the way and the fix requires s-off, it will be very difficult to get again.
Seanie280672 said:
not really something they will check to be honest, but if you s-on and you've played about with your phone down the line, like flashed a modified firmware or hboot, you will get an instant brick, if your hboot version is too high you will get the tampered flag back, or if you make a mistake along the way and the fix requires s-off, it will be very difficult to get again.
Click to expand...
Click to collapse
So, is the following step by step list correct.
1. Unlock boot loader
2. Get s-off via rumrunner
3. Change CID
4. Lock boot loader
5. Run RUU
And, I am currently on 4.3 and Sense 5.5, so can I go straight to the sense 6 and Android 4.4 RUU, or do I have to install the sense 5.5 and Android 4.4 RUU first.
Thanks
rh92 said:
So, is the following step by step list correct.
1. Unlock boot loader
2. Get s-off via rumrunner
3. Change CID
4. Lock boot loader
5. Run RUU
And, I am currently on 4.3 and Sense 5.5, so can I go straight to the sense 6 and Android 4.4 RUU, or do I have to install the sense 5.5 and Android 4.4 RUU first.
Thanks
Click to expand...
Click to collapse
yup that's the correct order, and you will have to use this RUU as its the only full RUU available, everything else is just OTA's
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
Seanie280672 said:
yup that's the correct order, and you will have to use this RUU as its the only full RUU available, everything else is just OTA's
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
Click to expand...
Click to collapse
And after installing this RUU I can just download Sense 6 via OTA.
rh92 said:
And after installing this RUU I can just download Sense 6 via OTA.
Click to expand...
Click to collapse
yes, just accept the ota's one at a time.
Seanie280672 said:
yes, just accept the ota's one at a time.
Click to expand...
Click to collapse
Thanks for your help
I have an PN07200, how can I get sense 6, which will be the best RUU and CID?.... Thanks!
Enviado desde mi HTC One X+ mediante Tapatalk
is it possible to re-apply the branding?
i.e.
RUU
change cid
OTA with brand change
gwaitsi said:
is it possible to re-apply the branding?
i.e.
RUU
change cid
OTA with brand change
Click to expand...
Click to collapse
yup, change your cid to its original one, and find your service providers RUU and flash it.

[Q] trying to manually update to lollipop but crashes when waiting for bootloader

hello guys, i am having some problem manually updating my htc one to lollipop
my phone is locked , S-ON
while running the RUU it detect the device at first then after starting looking for bootloader it give me an error usb not connected , and i repeat it several times .
my question is do i have to be unlocked and s-off to update through RUU ?
ali.nour85 said:
hello guys, i am having some problem manually updating my htc one to lollipop
my phone is locked , S-ON
while running the RUU it detect the device at first then after starting looking for bootloader it give me an error usb not connected , and i repeat it several times .
my question is do i have to be unlocked and s-off to update through RUU ?
Click to expand...
Click to collapse
You only have to be s-off and unlocked if the ruu doesn't match the your phone info, you can't install ota manually if your s-on, so which ruu are you trying to use ? And what does your version main / os version number say at the moment.
Seanie280672 said:
You only have to be s-off and unlocked if the ruu doesn't match the your phone info, you can't install ota manually if your s-on, so which ruu are you trying to use ? And what does your version main / os version number say at the moment.
Click to expand...
Click to collapse
im using this ruu
RUU_M7_UL_L50_SENSE60_MR_BrightstarUS_WWE_7.17.1540.7_Radio_4T.35.3218.16_10.33Q.1718.01L_release_420191_signed_2
i got this ruu from htc website
my software number is 6.15.599.101 and my CID is HTC 332
ali.nour85 said:
im using this ruu
RUU_M7_UL_L50_SENSE60_MR_BrightstarUS_WWE_7.17.1540.7_Radio_4T.35.3218.16_10.33Q.1718.01L_release_420191_signed_2
i got this ruu from htc website
my software number is 6.15.599.101 and my CID is HTC 332
Click to expand...
Click to collapse
Yup, I figured you were trying to use that ruu, look at the 3rd set of numbers, yours is 599 and that ruu is 1540, it won't work, you would need s-off, change cid, change mid, flash firmware and then run the ruu, you will have to do that or wait to get the update for your device.
S-off for your phone will cost $25 through sunshine s-off tool and is the only way to s-off your 6xxxxxxxx firmware which you are currently on.
Seanie280672 said:
Yup, I figured you were trying to use that ruu, look at the 3rd set of numbers, yours is 599 and that ruu is 1540, it won't work, you would need s-off, change cid, change mid, flash firmware and then run the ruu, you will have to do that or wait to get the update for your device.
S-off for your phone will cost $25 through sunshine s-off tool and is the only way to s-off your 6xxxxxxxx firmware which you are currently on.
Click to expand...
Click to collapse
ok thanks for explanation

Categories

Resources