device not found in recovery - Nexus 6 Q&A, Help & Troubleshooting

some assistance please.
I've been at it for about 40 minutes now, trying to sideload 5.1 onto the N6. Go me! Unfortunately I have come to a halt due to my computer not being able to recognize my device in recovery mode. I have the nexus root tool kit installed on my Win7 PC and i have done all the steps as far as driver installation and the toolkit says it is a success. I even open up command prompt when the device is turned on and type "adb devices" and it gives me the device info, I can even use my explorer to see the files I have in storage on the device too. Now if I type the same command while the device in in recovery mode, my computer tells me the device is not found. I have since downloaded the google drivers and tried updating the driver manually through Device Manager and that tells me that the drivers are up to date/best driver is already installed etc. So after goofing with that for a few tries, I uninstalled ALL nexus/google drivers and reinstalled them, twice now, with the same result.
Am I doing something wrong? Why does my computer not want me to update? why does it hate me?

melficeapollo said:
some assistance please.
I've been at it for about 40 minutes now, trying to sideload 5.1 onto the N6. Go me! Unfortunately I have come to a halt due to my computer not being able to recognize my device in recovery mode. I have the nexus root tool kit installed on my Win7 PC and i have done all the steps as far as driver installation and the toolkit says it is a success. I even open up command prompt when the device is turned on and type "adb devices" and it gives me the device info, I can even use my explorer to see the files I have in storage on the device too. Now if I type the same command while the device in in recovery mode, my computer tells me the device is not found. I have since downloaded the google drivers and tried updating the driver manually through Device Manager and that tells me that the drivers are up to date/best driver is already installed etc. So after goofing with that for a few tries, I uninstalled ALL nexus/google drivers and reinstalled them, twice now, with the same result.
Am I doing something wrong? Why does my computer not want me to update? why does it hate me?
Click to expand...
Click to collapse
Here is a channel i subscribe and the guy goes in detail about wugfresh root tool kid, some of the videos are from december. hope it helps.
https://www.youtube.com/channel/UCWhQwvCaC2ZMkCnrC15NfAw

i went the the link and viewed a video about sideloading through the toolkit, never knew i could do that, but i still came across the same problem. my computer wont recognize it.. smh..

melficeapollo said:
i went the the link and viewed a video about sideloading through the toolkit, never knew i could do that, but i still came across the same problem. my computer wont recognize it.. smh..
Click to expand...
Click to collapse
When you get the device not found error, unplug USB and reconnect. May have to repeat once or twice.

Evolution_Freak said:
When you get the device not found error, unplug USB and reconnect. May have to repeat once or twice.
Click to expand...
Click to collapse
Tried that like it was going out of style lol. No luck.

i finally got it figured out!!
i used the toolkit and install;ed Universal Google Drivers (option #3) and my pc was finally able to detect my device in recovery mode.
so if anyone comes across the same problem of not having the "right" drivers or not having your device detected,
1.) Install Universal Google Drivers and reboot your computer
2.) proceed to sideload your update.

Related

Fastboot Troubles

I just recently got into modding my N1 a few weeks ago and finally hit my first snag:
Original root was through superoneclick, so bootloader is still locked. I flashed over to stock GRI40 OTA without realizing (stupidly) that flashing
it would also flash over my RA recovery and unroot my phone. Now, superoneclick is incompatible with GRI40, so I can't re-root through that, and I'm having trouble
with unlocking the bootloader through fastboot.
I get no response from ADB or fastboot in windows cmd prompt when I boot phone to FASTBOOT.
the command "fastboot devices" gives me a repeat of the same prompt with no error. (I can't get fastboot to work in normal debugging mode either, and I don't know if it usually will, because this is the first time I've used it.)
the command "adb devices" gives me response-- "list of devices attached" with nothing below (ADB works fine in debugging mode though).
I thought it might be a driver problem, but "Android bootloader Interface" driver is on the device manager list while phone is in fastboot, and seems to be properly
installed; I can't seem to find another suitable driver to update it to anyways.
Beyond that, there don't seem to be any other drivers running in the device manager either.
It's to the point where I'm considering taking the long way around and re-rooting through passimg, but that may not work anyways from what I've been reading, and that still won't fix my fastboot issue.
Any ideas on why I can't get fastboot to work?
my devise manager lists it as 'Android 1.0' when connected with fast boot..
if the drivers were installed on their own, then uninstal them.. and manually update the drivers (download them yourself)
that might help.. idk..
Sent from my nexus one
I think that may be part of the problem because I'm not seeing Android 1.0 on the device manager list. I do have an unknown device on there, but I can't update the driver with any of the Google USB drivers. Also, I'm pretty sure it's not my N1 because I'll unplug the N1, delete the unknown device, and scan for hardware changes and it will pop up again, so I don't think it has anything to do with my phone.
Put your phone in to fast boot, plug the phone in to a different port on your computer. If you have been plugging it in to the front, plug it in to the back. If you have been plugging it in to the back, plug it in to the front.
This should force windows to re-detect your device and it will hopefully install the missing drivers you're needing...
That was a good idea, but I had no luck with that one either. Thanks though.
Alright, shreyas said device is "Android 1.0" from windows device manager when the phone is in fastboot. Why does mine say "Android Bootloader Interface" and is this the case for everyone else?
Even more interestingly, I'll uninstall it, manually install whatever driver I chose for it, and that installation will fail. Then, I'll uninstall it again and have 'puter automatically scan for hardware, "android 1.0" pops up as one of the unknown devices but then gets reassigned as "android Bootloader Interface" after automatically installing drivers.
Oh yeah, I'm running Windows 7 64.
The drivers mentioned here didn't help either
http://forum.xda-developers.com/showthread.php?t=702927
stratmn5105571 said:
Oh yeah, I'm running Windows 7 64.
Click to expand...
Click to collapse
i am on win7 32!
btw umm try this link
http://android.modaco.com/content/z...com/319156/winxp-7-zte-blade-drivers-and-adb/
another umm stupid thing mayb, did you try out adb wireless..?
Have you tried using the PDANet drivers? Those are the ones that I've had the best luck with on my Win7 x64 laptop.
EDIT: Seems you have...
I'd recommed using an application called USBDeView (I think?) to manually uninstall all USB drivers for Android/HTC/ADB/NexusOne/etc, and THEN installing the PDANet drivers.
Thanks for your help. I ended up downloading "superboot," which has fastboot on it, and it works just fine. I don't know what the deal is with the fastboot that came with the SDK but my computer just doesn't seem to like it. I checked and rechecked all commands and file directories, and I just don't get it...oh well, I hope this helps others.
Thanks again.

[Q] HTC One fastboot devices returns blank

Short story: can't get identifier token, stuck on "waiting for device".
Hi everyone I have scanned around and feel confident I have a unique or difficult situation trying to root my HTC One. I have the phone drivers installed, the latest 4.1.0.001 msi to be precise, and the phone responds more or less to the computer when it's in Android. So the issue is with fastboot state, for which I tried the normal HTC drivers, then other drivers I was able to find for Fastboot around XDA, and finally the Universal Naked Driver which supports HTC One for ADB. I am able to use the command adb reboot-fastboot and then I return a blank list from the command adb devices or fastboot devices. I have PDA net on the phone, and have it set to "connect automatically". There is a sign that something is awry when I plug the phone up to the PC and PDAnet immediately returns "can't connect, HTC Sync Error = -1". I went into windows and allowed unsigned drivers for ADB, and uninstalled other drivers, deleted files, and rebooted each time I switched drivers in attempt to get a response from the phone in Fastboot.
usb debugging is enabled. In fastboot, the Universal Naked driver returns the following error:
Port_#0004.Hub_#0003
This device cannot start. (Code 10)
A request for the USB BOS descriptor failed.
Btw Universal Naked Driver seems to be the MOST functional returning a lot of info about the device, and the second driver I dl'ed was apparently for HTC One X and didn't work at all.
Shortcuts I have taken: yeah I didn't install the entire android SDK I just got the package off XDA and also tried Hasoon's solution. I didn't install the entire large HTC Sync app either, but I don't think either of these are required.
Basically on my ATT htc one, I will never get this thing unlocked if it is REFUSING to recognize the device while it's in Fastboot, halting the process by making a bootloader unlock impossible.
Plz help and I won't return it for an S4!! I don't wanna. A beer to he who saves me the trip back to ATT store.
zWiLLX said:
Short story: can't get identifier token, stuck on "waiting for device".
Hi everyone I have scanned around and feel confident I have a unique or difficult situation trying to root my HTC One. I have the phone drivers installed, the latest 4.1.0.001 msi to be precise, and the phone responds more or less to the computer when it's in Android. So the issue is with fastboot state, for which I tried the normal HTC drivers, then other drivers I was able to find for Fastboot around XDA, and finally the Universal Naked Driver which supports HTC One for ADB. I am able to use the command adb reboot-fastboot and then I return a blank list from the command adb devices or fastboot devices. I have PDA net on the phone, and have it set to "connect automatically". There is a sign that something is awry when I plug the phone up to the PC and PDAnet immediately returns "can't connect, HTC Sync Error = -1". I went into windows and allowed unsigned drivers for ADB, and uninstalled other drivers, deleted files, and rebooted each time I switched drivers in attempt to get a response from the phone in Fastboot.
usb debugging is enabled. In fastboot, the Universal Naked driver returns the following error:
Port_#0004.Hub_#0003
This device cannot start. (Code 10)
A request for the USB BOS descriptor failed.
Btw Universal Naked Driver seems to be the MOST functional returning a lot of info about the device, and the second driver I dl'ed was apparently for HTC One X and didn't work at all.
Shortcuts I have taken: yeah I didn't install the entire android SDK I just got the package off XDA and also tried Hasoon's solution. I didn't install the entire large HTC Sync app either, but I don't think either of these are required.
Basically on my ATT htc one, I will never get this thing unlocked if it is REFUSING to recognize the device while it's in Fastboot, halting the process by making a bootloader unlock impossible.
Plz help and I won't return it for an S4!! I don't wanna. A beer to he who saves me the trip back to ATT store.
Click to expand...
Click to collapse
i would say you havent installed the drivers. best thing to download to get your HTC one to recognize in any mode is the HTC sync manager. i know its kinda annoying but the phone will get recongized in every mode and the initial plug in just requires a few minutes to detect, download, and install the drivers.
syaoran68 said:
i would say you havent installed the drivers.
Click to expand...
Click to collapse
I did try the "stripped" HTC One drivers found here on XDA.. I mean http://forum.xda-developers.com/showthread.php?t=2217396 seems pretty straightforward!
But yes at this point in the game why not give the full bloatware a try, thx
are you using the all in one toolkit? i have also found that installing the htc sync software helped alot of people with driver problems
Is your phone actually in fastboot mode?
Gave it a shot; my win 8 laptop still has no ability to recognize the phone in device manager with HTC BMP, Sync Manager, or HTC Driver Installer.. which are the the 3 related programs I've installed.
The HTC driver recognizes the device (while in Fastboot) as My HTC, while the Universal Naked Driver calls it something different I believe, but neither are working to allow adb or fastboot to list the device, and both drivers have the same error as to why the device can't start: "a request for the USB BOS descriptor failed"
BenPope said:
Is your phone actually in fastboot mode?
Click to expand...
Click to collapse
Hey Ben Pope thanks for asking, yes it's in the white screen saying ***LOCKED*** in pink at the top. And yes I get into fastboot by adb reboot-bootloader most of the time because it's easier than the button pressing (which I've done also).
One weird thing I did notice is that "FASTBOOT" is shown with a red background when the device goes into the mode, however if I use the volume up/dn buttons and navigate, the text changes to "FASTBOOT USB", and persists that way until it's re-booted. Don't know if that matters, but at least if it's totally abnormal, there could be something funky going on in the firmware.
Thanks.
skinsfanbdh said:
are you using the all in one toolkit? i have also found that installing the htc sync software helped alot of people with driver problems
Click to expand...
Click to collapse
I tried Hasoon's toolkit but because it calls fastboot oem getidentifiertoken or whatever it is, the result is "waiting for device" which stops the process in its tracks even while the phone is in the white screen, where it got from responding to the prior command the toolkit sent which I believe is adb reboot-bootloader.
Currently I installed the 48mb "stripped" sync software from the link a few posts prior; do you think I should go with the non-stripped version?
zWiLLX said:
Gave it a shot; my win 8 laptop still has no ability to recognize the phone in device manager with HTC BMP, Sync Manager, or HTC Driver Installer.. which are the the 3 related programs I've installed.
The HTC driver recognizes the device (while in Fastboot) as My HTC, while the Universal Naked Driver calls it something different I believe, but neither are working to allow adb or fastboot to list the device, and both drivers have the same error as to why the device can't start: "a request for the USB BOS descriptor failed"
Click to expand...
Click to collapse
there is a thread around for people who are having issues with windows 8. the soulution for you problem is probably in that thread
---------- Post added at 11:01 AM ---------- Previous post was at 10:59 AM ----------
zWiLLX said:
Hey Ben Pope thanks for asking, yes it's in the white screen saying ***LOCKED*** in pink at the top. And yes I get into fastboot by adb reboot-bootloader most of the time because it's easier than the button pressing (which I've done also).
One weird thing I did notice is that "FASTBOOT" is shown with a red background when the device goes into the mode, however if I use the volume up/dn buttons and navigate, the text changes to "FASTBOOT USB", and persists that way until it's re-booted. Don't know if that matters, but at least if it's totally abnormal, there could be something funky going on in the firmware.
Thanks.
Click to expand...
Click to collapse
to use fastboot commands it needs to say fastboot usb
---------- Post added at 11:03 AM ---------- Previous post was at 11:01 AM ----------
zWiLLX said:
I tried Hasoon's toolkit but because it calls fastboot oem getidentifiertoken or whatever it is, the result is "waiting for device" which stops the process in its tracks even while the phone is in the white screen, where it got from responding to the prior command the toolkit sent which I believe is adb reboot-bootloader.
Currently I installed the 48mb "stripped" sync software from the link a few posts prior; do you think I should go with the non-stripped version?
Click to expand...
Click to collapse
when it says waiting for device you have to close that cmd screen and if your phone says fastboot usb it will start but you have to manually close the first window
hey SkinsFan, I tried the thread here and downloaded the ADB drivers to replace my Android 1.0 device. Other than those new drivers, I had done a lot of those steps. However, the PC says "The third party INF does not contain digital signature information", and rejects the ADB drivers linked from there, despite already allowing unsigned drivers in Windows settings.
Actually now I can't re-install the "naked driver" and matters are worse because the PC is now saying a hash file is missing for them, despite being installed an hour ago. So I guess I'll restart and try again, possibly unistalling HTC Sync since it was the new addition.
as far as closing the cmd window, this isn't doing anything to make the device recognized by the PC and it isn't therefore showing in adb devices or fastboot devices.
Still working on it thanks!
zWiLLX said:
hey SkinsFan, I tried the thread here and downloaded the ADB drivers to replace my Android 1.0 device. Other than those new drivers, I had done a lot of those steps. However, the PC says "The third party INF does not contain digital signature information", and rejects the ADB drivers linked from there, despite already allowing unsigned drivers in Windows settings.
Actually now I can't re-install the "naked driver" and matters are worse because the PC is now saying a hash file is missing for them, despite being installed an hour ago. So I guess I'll restart and try again, possibly unistalling HTC Sync since it was the new addition.
as far as closing the cmd window, this isn't doing anything to make the device recognized by the PC and it isn't therefore showing in adb devices or fastboot devices.
Still working on it thanks!
Click to expand...
Click to collapse
when your phone is in bootloader does it say fastboot usb at the top?
i think the links for drivers are for samsung devices he said its copied from his other thread. you need to get drivers from somewhere else
As I said, after "adb reboot-bootloader", left untouched, it says "FASTBOOT", but when I use a volume key to navigate just one click, it changes its tune to "FASTBOOT USB". I don't know whats going on with that ...
The samsung drivers are there but I believe Android ADB interface drivers can be universal , not sure, but now can't get back my Naked driver! working on that now
zWiLLX said:
As I said, after "adb reboot-bootloader", left untouched, it says "FASTBOOT", but when I use a volume key to navigate just one click, it changes its tune to "FASTBOOT USB". I don't know whats going on with that ...
The samsung drivers are there but I believe Android ADB interface drivers can be universal , not sure, but now can't get back my Naked driver! working on that now
Click to expand...
Click to collapse
Hey, I know your issue I can help on TeamViewer? Don't worry, I won't harm your PC
try pressing the power button while in bootloader. does it switch between hboot and fastboot usb?
MacHackz said:
Hey, I know your issue I can help on TeamViewer? Don't worry, I won't harm your PC
Click to expand...
Click to collapse
I am open to that! Could you give a preview on what you're thinking? Have teamviewer running. I will warn you I've lost ability to install the Universal Naked Driver via a "missing hash file" despite having it installed hours ago.
@skinsfanbdh yes. But again, it starts off intially (before a volume keypress) as "fastboot" not "fastboot USB", then changes.
zWiLLX said:
I am open to that! Could you give a preview on what you're thinking? Have teamviewer running. I will warn you I've lost ability to install the Universal Naked Driver via a "missing hash file" despite having it installed hours ago.
@skinsfanbdh yes. But again, it starts off intially (before a volume keypress) as "fastboot" not "fastboot USB", then changes.
Click to expand...
Click to collapse
yea it has to be plugged it to the computer first
zWiLLX said:
I am open to that! Could you give a preview on what you're thinking? Have teamviewer running. I will warn you I've lost ability to install the Universal Naked Driver via a "missing hash file" despite having it installed hours ago.
@skinsfanbdh yes. But again, it starts off intially (before a volume keypress) as "fastboot" not "fastboot USB", then changes.
Click to expand...
Click to collapse
Hey, I replied to your email PM me your TeamViewer info
MacHackz said:
Hey, I replied to your email PM me your TeamViewer info
Click to expand...
Click to collapse
Hey guys, Im experiencing similar problems. How exactly did you guys solve it?
Thanks
MacHackz said:
Hey, I replied to your email PM me your TeamViewer info
Click to expand...
Click to collapse
Hey, I´m experiencing the same problem here. Could you help me too?
Kenchinito said:
Hey, I´m experiencing the same problem here. Could you help me too?
Click to expand...
Click to collapse
Sorry for the very slow reply. Unfortunately, we won't know why HTC didn't play nicely with my Lenovo/Win8 laptop. However, I was quick to try a different older netbook I had lying around. At first, nothing happened, and I got used to the Sense UI enough to tolerate it.
But, I couldn't wifi tether and a few other unacceptable details, so I tried again last week with the same netbook that didn't seem to work the first time, and voila! Flawless. Maybe a reboot of that kicked it into gear, but both ADB and Fastboot were recognizing the HTC as a specific device, as opposed to the lenovo which found a ghost device with no name.
I am guessing too many android devices were installed and in the registry as USB devices, disorienting the PC, even though they were uninstalled, perhaps their drivers lingered as shared drivers. In theory I had S3 S4, HTC, possibly S2 and Motorola drivers all present.
The key is, keep the drivers on a folder on your phone with adb fastboot etc, and try a couple diff laptops. You'll know it worked when the device is recognized via "devices" with its unique number in both adb and fastboot.
Now running Revolution HD Google Play after trying CM 10.2 and Revolution HD Sense. CM did not work very smoothly with a lot of force crashes (navigation and music) and I can strongly recommend RevolutionHD google play edition.
Beware though, the first wipe takes out all the contacts and pictures etc, unfortunately, because I thought they would be spared.

[Q] ADB doesnt recognize HTC One in Recovery

I have a nandroid backup.
Its too big to keep on the phone at all times
Therefore its been placed on my computer
And in the case i need it (boot-loop), how can i transfer the backup while in CWM?
ADB seems to be the simplest way, but adb cannot find my device when it is in the bootloader or in custom recovery.
Am i missing something? Or is there another way to solve this issue.
If anyone could help, id be very grateful.
Hi
Greetings,
When you boot in fastboot and connect your phone to pc does it shows fastboot usb if yes then it is recognised if no then you will have to download the drivers if HTC and install them
Sent from my HTC Sensation Z710e using xda premium
shrex said:
Hi
Greetings,
When you boot in fastboot and connect your phone to pc does it shows fastboot usb if yes then it is recognised if no then you will have to download the drivers if HTC and install them
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
yes fastboot usb is shown and all fastboot commands work, its just that adb doesnt work when its in bootloader or recovery.
I did some more digging around and found that when the phone is connected while in recovery, the computer recognizes it as a "HTC MTP device"..and thats it. I cant upgrade the drivers of the said device or essentially do anything with it.
What am i missing?
ADB should only work under Recovery. I found that with the last HTC driver it didn't install for when you are under Bootloader, Recovery, or Fastboot. I forgot what version actually worked the best but it might have been the 3 series drivers. Anyway while under Recovery you'll have to force the HTC drivers to install thru your Device Manager. It will not automagically detect them. I would start with these drivers and try them out.
HTCDriver_4.2.0.001.exe
Universal_Naked_Driver_0.72.zip
HTCDriver3.0.0.007.exe
TygerByte said:
ADB should only work under Recovery. I found that with the last HTC driver it didn't install for when you are under Bootloader, Recovery, or Fastboot. I forgot what version actually worked the best but it might have been the 3 series drivers. Anyway while under Recovery you'll have to force the HTC drivers to install thru your Device Manager. It will not automagically detect them. I would startpage these drivers and try them out.
HTCDriver_4.2.0.001.exe
Universal_Naked_Driver_0.72.zip
HTCDriver3.0.0.007.exe
Click to expand...
Click to collapse
Thanks for the reply, ive tried the first two drivers, work fine when the phone is booted, but no avail in recovery. The laptop shows the device connected as "My HTC" while in recovery, but im unable to use adb commands as adb doesnt connect to it. Ill try the third 3 series driver and post an update in a few.
UPDATE: wont install, im running windows 8 and it says this driver is not compatible with this operating system.
Bhavpreet said:
Thanks for the reply, ive tried the first two drivers, work fine when the phone is booted, but no avail in recovery. The laptop shows the device connected as "My HTC" while in recovery, but im unable to use adb commands as adb doesnt connect to it. Ill try the third 3 series driver and post an update in a few.
UPDATE: wont install, im running windows 8 and it says this driver is not compatible with this operating system.
Click to expand...
Click to collapse
Does it say its offline? What do you actually see when using adb. As for the driver in Windows 8, you have to disable driver signature checking to use them. There is a thread in the Nexus 4 forum on how to do this, which is here:
http://forum.xda-developers.com/showpost.php?p=33463359&postcount=109
EddyOS said:
Does it say its offline? What do you actually see when using adb. As for the driver in Windows 8, you have to disable driver signature checking to use them. There is a thread in the Nexus 4 forum on how to do this, which is here:
http://forum.xda-developers.com/showpost.php?p=33463359&postcount=109
Click to expand...
Click to collapse
installed the 3 series driver, still the same problem. Heres some photos (which i should have attached originally) of whats happening.
The pictures are while the phone is normally booted, and then when the phone is in recovery.
Edit: Uninstalled all of the HTC drivers and devices inside the device manager, and only installed the Universal Naked Driver, the phone now shows up with a different name in device manager, but STILL does not work while in recovery.
Another pictures attached of how device manager looks with just the Universal Driver while in recovery.
anyone?
i have the same problem as u.. I tried both my missus Windowss PC now.. It used to detect it before. Now it suddenly doesn´t anymore. On my mac, same deal. Nothing detected.
Been googling around and i have found threads but they all end unsolved. ADB returns ADB devices blank. Kill-server or adb remount does nothing. in Fastboot USB its totally a ghost.
found any fixes?
I'm clueless too. I can only think to try other recoveries. Philz CWM comes to mind. I also uploaded the latest google usb drivers for you incase you want to try that out too. Google v7 USB drivers I think they are called. You'll probably have to force install them since they won't detect. Included the adb and fastboot from the SDK too. Last thing I can probably suggest is to try different USB port. Oh and TWRP too since it has the terminal built in it you could try starting up ADB from there.
Me too...
Did anyone ever resolve this? I'm facing it now, having tried multiple recoveries. Previously was able to use adb fine. (I'm on a mac.)
bretula said:
Did anyone ever resolve this? I'm facing it now, having tried multiple recoveries. Previously was able to use adb fine. (I'm on a mac.)
Click to expand...
Click to collapse
In case this helps someone else: The reason I lost adb was that I'd installed the drivers on my mac for EasyTether. There's a note about this on the EasyTether FAQ page. When I disabled the EasyTether driver, I was able to use adb again.
TygerByte said:
I'm clueless too. I can only think to try other recoveries. Philz CWM comes to mind. I also uploaded the latest google usb drivers for you incase you want to try that out too. Google v7 USB drivers I think they are called. You'll probably have to force install them since they won't detect. Included the adb and fastboot from the SDK too. Last thing I can probably suggest is to try different USB port. Oh and TWRP too since it has the terminal built in it you could try starting up ADB from there.
Click to expand...
Click to collapse
have you tied all-in-one-tool-kit ???
Not sure if this will help, but I had an issue like this with my asus tab - adb worked fine in android os but not in twrp recovery, device manager showing it as other device.
While in recovery with device connected to pc I followed this how-to from the device manager part on and got adb working in recovery.
ADB not connecting
Bhavpreet said:
I have a nandroid backup.
Its too big to keep on the phone at all times
Therefore its been placed on my computer
And in the case i need it (boot-loop), how can i transfer the backup while in CWM?
ADB seems to be the simplest way, but adb cannot find my device when it is in the bootloader or in custom recovery.
Am i missing something? Or is there another way to solve this issue.
If anyone could help, id be very grateful.
Click to expand...
Click to collapse
Re Install HTC drivers manually, windows sees HTC until you boot into recovery mode and try to use ADB, It worked for me.
HTC One(M7) not recognized by adb
Condition:
HTC One(M7) - rooted; s-ON; GPE ROM 4.3.1
Recovery - CWM
I have a similar problem with my HTC One(M7). I'm working mainly on a mac (OSX Maverick), but I have also tried using a PC (Windows 8). I accidentally wiped the data on the phone while in recovery, and now I have a phone that only boots to the bootloader and recovery. Since backups usually take a lot of memory, I kept all of mine on my computer. The simple fix I've been trying to do is sideload the ROM to the phone through adb, however adb does not find the device. I repeatedly get the "device not found". However the device is recognized in fastboot, and i always get the "fastboot USB" when it is connected. So I am unable to flash the ROM I need to the phone because it is unable to communicate with either computer. On the PC I made sure to have had the proper drivers, I downloaded HTC SYNC, and have tried updating them manually. However I always get the "error Code 43". The PC also does not recognize the device, so again I am unable to communicate with the device. Can I plz get any help, I have tried reading multiple forums, but have had no luck trying any solution. I would really appreciate any advise; Im desperate to fix the phone.
TonyDEV said:
Condition:
HTC One(M7) - rooted; s-ON; GPE ROM 4.3.1
Recovery - CWM
I have a similar problem with my HTC One(M7). I'm working mainly on a mac (OSX Maverick), but I have also tried using a PC (Windows 8). I accidentally wiped the data on the phone while in recovery, and now I have a phone that only boots to the bootloader and recovery. Since backups usually take a lot of memory, I kept all of mine on my computer. The simple fix I've been trying to do is sideload the ROM to the phone through adb, however adb does not find the device. I repeatedly get the "device not found". However the device is recognized in fastboot, and i always get the "fastboot USB" when it is connected. So I am unable to flash the ROM I need to the phone because it is unable to communicate with either computer. On the PC I made sure to have had the proper drivers, I downloaded HTC SYNC, and have tried updating them manually. However I always get the "error Code 43". The PC also does not recognize the device, so again I am unable to communicate with the device. Can I plz get any help, I have tried reading multiple forums, but have had no luck trying any solution. I would really appreciate any advise; Im desperate to fix the phone.
Click to expand...
Click to collapse
Take a look at this FAQ post and see if this doesn't help solve your problems. I would also recommend updating your CWM recovery to the latest.
having a similar problem. My system and everything is wiped all I have is TWRP 2.6.0.1 and I'm trying to end with cyanogenmod. theres no sdcard slot so my only option is an adb push through recovery. Adb doesnt recognize it, it just doesn't return anything in the list of devices when i type adb devices. in devmgmt it lists my phone as a disk drive... I have tried to update the drivers to the universal naked ones, but then windows says that it already found and installed the best driver software I have the T-Mobile variant but I thought I'd post here since this problem is more than likely not carrier specific and I didn't wanna add another thread. I can do fastboot just fine when in fastboot usb mode, but in recovery no adb... I can't install the naked drivers it just says that the file is incompatible
blu422 said:
having a similar problem. My system and everything is wiped all I have is TWRP 2.6.0.1 and I'm trying to end with cyanogenmod. theres no sdcard slot so my only option is an adb push through recovery. Adb doesnt recognize it, it just doesn't return anything in the list of devices when i type adb devices. in devmgmt it lists my phone as a disk drive... I have tried to update the drivers to the universal naked ones, but then windows says that it already found and installed the best driver software I have the T-Mobile variant but I thought I'd post here since this problem is more than likely not carrier specific and I didn't wanna add another thread. I can do fastboot just fine when in fastboot usb mode, but in recovery no adb...
Click to expand...
Click to collapse
your TWRP is very outdated update to 2.6.3.3
http://techerrata.com/browse/twrp2/m7
Install this driver then plug your phone in and enter TWRP
http://www.mediafire.com/download/j55vk6qbbr6250c/HTCDriver_4.8.0.002.exe
If device manager does not see your phone as My HTC under ADB Interface it's installed wrong.
clsA said:
your TWRP is very outdated update to 2.6.3.3
http://techerrata.com/browse/twrp2/m7
Install this driver then plug your phone in and enter TWRP
http://www.mediafire.com/download/j55vk6qbbr6250c/HTCDriver_4.8.0.002.exe
If device manager does not see your phone as My HTC under ADB Interface it's installed wrong.
Click to expand...
Click to collapse
thanks! did what you said i installed the drivers and the installation crashed the first time, then the second time it game me the option to remove or repair and i repaired and it worked thank you!!!
---------- Post added at 02:55 PM ---------- Previous post was at 02:37 PM ----------
clsA said:
your TWRP is very outdated update to 2.6.3.3
http://techerrata.com/browse/twrp2/m7
Install this driver then plug your phone in and enter TWRP
http://www.mediafire.com/download/j55vk6qbbr6250c/HTCDriver_4.8.0.002.exe
If device manager does not see your phone as My HTC under ADB Interface it's installed wrong.
Click to expand...
Click to collapse
so i have adb... but now it wont let me flash cyanogenmod... error executing updater binary in zip.... just fails.... help? updated to twrp 2.7.1.1. that fixed the problem

Phone won't connect to HTC Sync or adb

Got my phone about a week ago & got pretty bored of it so I wanted to root it and get a different ROM going. For some reason, I can't get the phone to connect to HTC Sync Manager though I updated the drivers. Any time the phone is switched into USB debugging, My HTC drivers fail to install. I have no idea how to solve this problem. Also when trying to get the Token ID using the command prompt, the device doesn't show up after using the command adb devices either. Need help please.
In bootloader you should type fastboot devices not adb devices.
You can try this to get the drivers installed correctly
On your PC go to device manager and find your phone(usually M7WLS), right click and select properties
Select the driver tab
Select update driver
Select browse my comp
Let me pick
Look for ADB USB device or similar should be one of the first couple choices
Select MyHTC install and you should be good
Also try these drivers http://d-h.st/FXC
bigdaddy619 said:
In bootloader you should type fastboot devices not adb devices.
You can try this to get the drivers installed correctly
On your PC go to device manager and find your phone(usually M7WLS), right click and select properties
Select the driver tab
Select update driver
Select browse my comp
Let me pick
Look for ADB USB device or similar should be one of the first couple choices
Select MyHTC install and you should be good
Also try these drivers http://d-h.st/FXC
Click to expand...
Click to collapse
If the phone doesn't have USB debugging enabled, it doesn't appear in the device manager besides under portable devices. Once USB debugging is turned on, Android devices tab appears at the top but the drop down reads My HTC with the yellow triangle with ! on the inside indicating there's some sort of issue. I tried updating the drivers, uninstalling the drivers, restarting the phone and computer, then reinstalling the drivers but nothing has worked thus far. HTC Sync still isn't detecting the phone at all and I can't get the Token ID to continue the rooting process until the device is able to be detected.
HurtMeSole said:
If the phone doesn't have USB debugging enabled, it doesn't appear in the device manager besides under portable devices. Once USB debugging is turned on, Android devices tab appears at the top but the drop down reads My HTC with the yellow triangle with ! on the inside indicating there's some sort of issue. I tried updating the drivers, uninstalling the drivers, restarting the phone and computer, then reinstalling the drivers but nothing has worked thus far. HTC Sync still isn't detecting the phone at all and I can't get the Token ID to continue the rooting process until the device is able to be detected.
Click to expand...
Click to collapse
Windows 8.1?
bigdaddy619 said:
Windows 8.1?
Click to expand...
Click to collapse
No, Windows 7, 64-bit.
HurtMeSole said:
No, Windows 7, 64-bit.
Click to expand...
Click to collapse
Check PM
i'm having this same issue. i just had to reload my phone back to stock bc it crashed. i'm trying to get it to be set to s-off but i can't get rumrunner to see my phone with adb connection. also on the device manager it shows the android phone under other devices with a ! on it.
i'm also using win7Pro x64 not sure what else to do on it at this point to get it working correctly
HTC Sync also doesn't see it. i got it see it for a few minutes last night but the it stopped again
trinity343 said:
i'm having this same issue. i just had to reload my phone back to stock bc it crashed. i'm trying to get it to be set to s-off but i can't get rumrunner to see my phone with adb connection. also on the device manager it shows the android phone under other devices with a ! on it.
i'm also using win7Pro x64 not sure what else to do on it at this point to get it working correctly
HTC Sync also doesn't see it. i got it see it for a few minutes last night but the it stopped again
Click to expand...
Click to collapse
I'm still having the same issue. I gave up for the time being but hopefully someone else had the same issue & can help us out.
HurtMeSole said:
I'm still having the same issue. I gave up for the time being but hopefully someone else had the same issue & can help us out.
Click to expand...
Click to collapse
Same problem here with an HTC One Mini. Its driving me mad!:silly:
trinity343 said:
i'm having this same issue. i just had to reload my phone back to stock bc it crashed. i'm trying to get it to be set to s-off but i can't get rumrunner to see my phone with adb connection. also on the device manager it shows the android phone under other devices with a ! on it.
i'm also using win7Pro x64 not sure what else to do on it at this point to get it working correctly
HTC Sync also doesn't see it. i got it see it for a few minutes last night but the it stopped again
Click to expand...
Click to collapse
Strangely enough, I literally just tried it on a different computer and everything worked exactly as it was supposed to. I had 3 computers in my home, none of which worked but got to work and the laptop they gave me worked just fine. Then I got on my gf's Mac and it went mostly smooth (even though it was difficult not being as familiar with the OS). My advice is do everything you're doing on a different computer until you see it without the ! in the device manager.
Boblud said:
Same problem here with an HTC One Mini. Its driving me mad!:silly:
Click to expand...
Click to collapse
Should try using a different computer. Worked for me after trying several computers.
BD619 said:
In bootloader you should type fastboot devices not adb devices.
You can try this to get the drivers installed correctly
On your PC go to device manager and find your phone(usually M7WLS), right click and select properties
Select the driver tab
Select update driver
Select browse my comp
Let me pick
Look for ADB USB device or similar should be one of the first couple choices
Select MyHTC install and you should be good
Also try these drivers http://d-h.st/FXC
Click to expand...
Click to collapse
My experience may be helpful. I had no ADB driver, but Composite USB seemed to work. However, the driver install crashed. I needed to open my phone and answer the dialogs on my phone while the driver was installing. After that, everything is hunky-dorry (I know, showing my age).
I was having the same problem until I UNCHECKED the USB debugging mode and reconnected the phone to the computer. Drivers reinstalled and HTC Sync Manager (not HTC Sync--different program) recognized the phone. I had to answer dialogue on phone and then the USB debugging mode status changed itself to enabled. It's all working now, after hours of fiddling.

Fastboot "waiting for device"

I already enabled OEM Unlock and USB Debugging in Developer options.
then I connected my LG G4 H811 to PC and confirmed MTP.
adb devices just shows:
List of devices attached
If I select USB charge instead of MTP, the adb devices shows:
List of devices attached:
LGH811***** device
Then I can do "adb reboot bootloader"
Phone shuts down and get on fastboot with this "waiting for device" I got stuck there.
Does anyone know the reason? Really need to unlock bootloader and then root my phone.
Thanks
Sent from my SM-A800F using XDA-Developers mobile app
Yeah I'm experiencing this too as well! I just recently updated to 20p and I am trying to root again. I was able to use fastboot to install twrp before. Don't know why this is happening.
This is what I did
In fatsboot I saw in device manager my phone was "rats I don't remember-something bootloader device" I chose update driver and browse my filkes and chose the marshal one. after that everything worked fine. Sry I'm an anxious person. Hopes this helps and if not or I could help more ask me more and hopefully I'll be more mellow lol.
Bootloader unrecognized
I used the app shared above and used it to locate the driver and ended up having to roll back to a previous driver and it worked in my case.
wish0 said:
In fatsboot I saw in device manager my phone was "rats I don't remember-something bootloader device" I chose update driver and browse my filkes and chose the marshal one. after that everything worked fine. Sry I'm an anxious person. Hopes this helps and if not or I could help more ask me more and hopefully I'll be more mellow lol.
Click to expand...
Click to collapse
[email protected] said:
I used the app shared above and used it to locate the driver and ended up having to roll back to a previous driver and it worked in my case.
Click to expand...
Click to collapse
Can one of you share a link to the driver you used?
MaRz0o said:
Can one of you share a link to the driver you used?
Click to expand...
Click to collapse
I'm at work won't get off for another 13 hours but like the post maybe two above here it was Marshall something. Go to device manager look for the boot loader adb interface can't remember exactly what it's called and double click it and use the menu option to rollback not update the driver and you should be good. I tried everything else including the one touch and only the rollback worked.
For my computer, it shown up as something like "Kedacom USB Device" in the Device Manager, but I rolled back that driver from 11 to 9 and it worked beautifully!
chromiumfan said:
For my computer, it shown up as something like "Kedacom USB Device" in the Device Manager, but I rolled back that driver from 11 to 9 and it worked beautifully!
Click to expand...
Click to collapse
Do you have the driver? I have none to roll back to.
Okay...
Okay so yeah it says kedacom usb device, that gives me the waiting for device error...in device manager when im in fastboot mode find kedacom device and click on it to see android bootloader interface. Right click on the android bootloader interface and choose update driver, browse my computer for driver software, then let me pick from a list of device drivers on my computer. From there I choose marshal London bootloader interface. From there everything works... don't have to restart computer of phone, everything works together perfect. Either it came with my computer or its from this install of adb... the 15 sec adb installer http://forum.xda-developers.com/showthread.php?t=2588979. Try my steps see if it works!
wish0 said:
Okay so yeah it says kedacom usb device, that gives me the waiting for device error...in device manager when im in fastboot mode find kedacom device and click on it to see android bootloader interface. Right click on the android bootloader interface and choose update driver, browse my computer for driver software, then let me pick from a list of device drivers on my computer. From there I choose marshal London bootloader interface. From there everything works... don't have to restart computer of phone, everything works together perfect. Either it came with my computer or its from this install of adb... the 15 sec adb installer http://forum.xda-developers.com/showthread.php?t=2588979. Try my steps see if it works!
Click to expand...
Click to collapse
I am having the "waiting for device" issue. But I dont have the "Marshal London" drivers. I have adb 15 sec drivers installed. Any idea where I could get them?
okay another try..
Okay have you tried, while the waiting for device prompt is up, instead of telling your computer you want to select from the list of drivers, to choose automatic: search online for the driver?

Categories

Resources