Database Develop

Root for Xperia Z 10.3.1.A.0.244

Hello guyz,
I tried rooting my Xperia Z 10.3.1.A.0.244 according to the instructions on http://forum.xda-developers.com/show....php?t=2386405.
But when I start the tool at the end of the processing it says 10.3.1.A.0.244 is not supported.
So how can I root it.

gunjans1208 said:
Hello guyz,
I tried rooting my Xperia Z 10.3.1.A.0.244 according to the instructions on http://forum.xda-developers.com/show....php?t=2386405.
But when I start the tool at the end of the processing it says 10.3.1.A.0.244 is not supported.
So how can I root it.
Click to expand...
Click to collapse
Hi, not much i can say, but you need to follow this instruction:
http://forum.xda-developers.com/showthread.php?t=2386405
[ how-to ]
Download the three files from the download section below
open FlashTool and flash the XperiaZ_C660X_KernelOnly_10.3.A.0.423_Generic_NL.ftf - 7.12 MB file, this is JUST the kernel of an older firmware which was rootable
now once flashing is done reboot device and connect to PC in usb debuggin mode
CLOSE FLASHTOOL <<< VVVIMP STEP
extract the file DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip to root directory on c:\
execute runme_ file corresponding to your OS on desktop PC, this will execute a SPECIAL version of my easy rooting toolkit <<< VVVIMP STEP
the above step is crucial! if you use any older version of the toolkit then IT WILL NOT WORK!
after rooting is over the device will restart
you can verify if device is rooted by checking for SuperSU app (it is the newest version)
once thats done now power down device and open FlashTool again
now flash XperiaZ_C660X_KernelOnly_10.3.1.A.0.244_BE.ftf - 7.17 MB file to get back to the true kernel for the firmware
thats it after flashing is done just disconnect and power on device and enjoy rooted phone!
Click to expand...
Click to collapse

I messed up the whole rooting - HELP!
Hi .. I have done the following:
1) tried some other 1-click softwares before I found this post.
2) unlocked the Bootloader
Now when I used the Flashtool (Emma) it says that there have been modifications to my software and cannot flash
What can I do? Is there a more manual way to flash the kernel to the older version??

ryeporta said:
What can I do? Is there a more manual way to flash the kernel to the older version??
Click to expand...
Click to collapse
The flashtool. Read the stickys.

ryeporta said:
Hi .. I have done the following:
1) tried some other 1-click softwares before I found this post.
2) unlocked the Bootloader
Now when I used the Flashtool (Emma) it says that there have been modifications to my software and cannot flash
What can I do? Is there a more manual way to flash the kernel to the older version??
Click to expand...
Click to collapse
If you have unlocked the BL just flash the advanced stock kernel via fastboot & then boot in recovery & flash the su zip that is kicking around for rooting 4.3....
worked for me anyway

The way to root is easy if you read. You downgrade to a 434 kernel with flash tool, run the root and upgrade back again with flash tool, easy. Don't need to unlock or anything.
Sent from my C6603 using Tapatalk 4

alias_neo said:
The way to root is easy if you read. You downgrade to a 434 kernel with flash tool, run the root and upgrade back again with flash tool, easy. Don't need to unlock or anything.
Sent from my C6603 using Tapatalk 4
Click to expand...
Click to collapse
So do you need put the necessary files inside the flashtool/firmwares folder?
After that:
Open flashmode and select the .423 file and flash it, apply root and after reboot and flash back to.244?

CiscoX said:
Hi, not much i can say, but you need to follow this instruction:
http://forum.xda-developers.com/showthread.php?t=2386405
Click to expand...
Click to collapse
Thanx friend it really helped...

at step 11, the XperiaZ_C660X_KernelOnly_10.3.1.A.0.244_BE.ftf didn't show up at the flashtool.
Help thanks

[Guide] Install Flashtool On Windows 8.1 FIX BY Amir Ahangar

Flashtool is a S1 flashing software that works for all Sony phones from X10 to Xperia Z Ultra. They all use the S1 protocol for flashing firmwares.
If You Have Problem with installing Flash Tool Driver on Win 8.1
I Will help you yo install
Step 1 :
Download Flash tool you can download Here http://www.flashtool.net/downloads.php
Step 2 :
Then Download This Windows Update
download.microsoft.com/download/2/6/4/264323EB-9942-4301-9DBD-B6FD4BB8ABA2/Windows8.1-KB2917929-x64.msu
Click to expand...
Click to collapse
Step 3:
Install update
Step 4:
Install Flash Tool
Step 5 :
Download Attachment
http://forum.xda-developers.com/attachment.php?attachmentid=3049172&stc=1&d=1417775415
Step 6 :
Install Attachment driver
Thanks Button Please' if this thread helped you

[STOCK]LOLLIPOP Android 5.0.2 10.6.A.0.454 (US/INDIAN) [C5502] with root instructions

Here is firmware :
US version
https://mega.co.nz/#!UAkWgLYQ!5Pz1F25G_N18qVXpxiXysrei9nvKVqvpzr6CQDJ0QnY
Indian version:
https://mega.nz/#!ABNmTTQS!peO609s5JGbjnvZZPSBYza6LUivCJPXNx8nb8tV30yM
Recovery(TWRP) by @xenius9:
https://mega.nz/#!YB0yHASa!MGTJqi45-ximfrUiGECWpCxPKMYgT0MuAVIq65MY_-g
SuperSU by @Chainfire:
http://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
Instructions for rooting:
1) Back up TA if not already done so
2) Unlock Bootloader
3) Extract 5.0.2 FTF from PC Companion download
4) Extract 5.0.2 kernel
5) Flash new FTF in full
6) Flash any CWM kernel
7) Load CWM and install root
7) Flash 5.0.2 kernal from FTF
8) Restore TA
8) Done!
NOTE: 1)You can use recovery once only i.e. before flashing kernel
after the device is booted recovery will be lost and when you again try to install dual recovery by nut device will get bricked
2)I TAKE NO RESPONSIBILITY IF YOUR PHONE GETS BRICKED
THANKS @NeoJeo @vaisakh7 @doby_p

Downloaded fast , installed and working great thanks

Does it contain appslog.sin ?
Does this contain appslog.sin ?
I created mine and I can't find it there
which is strange
so i am wondering if yours has it

John98Zakaria said:
Does this contain appslog.sin ?
I created mine and I can't find it there
which is strange
so i am wondering if yours has it
Click to expand...
Click to collapse
even my doesn't contain appslog.sin

Updated with Indian version ftf file

Give Me Indain Firmware FTF HTTP link From mega , my downloading is slow

rkumbhar said:
Give Me Indain Firmware FTF HTTP link From mega , my downloading is slow
Click to expand...
Click to collapse
the links provided are from mega only

Learning curve.........trying
Fail...just got the warning tool sign!!! after Step 6.
Screen went off & had to replace battery!
Re-flashed from Step 5.

moto g 2014 stock firmware install

is there any method to install stock firmware via pC????( just like SP FlashTool )

via fastboot mode
refer this thread
1st unlock bootloader only then you can flash stock ROM else it will brick your phone
http://forum.xda-developers.com/moto-g-2014/development/restore-to-stock-t2873657

Or you have this Windows One click tool made by Shawn5162 : http://forum.xda-developers.com/moto-g-2014/development/windows-tool-moto-g-2014-xt1064-restore-t2957167

seliver said:
Or you have this Windows One click tool made by Shawn5162 : http://forum.xda-developers.com/moto-g-2014/development/windows-tool-moto-g-2014-xt1064-restore-t2957167
Click to expand...
Click to collapse
SharkcpN said:
via fastboot mode
refer this thread
1st unlock bootloader only then you can flash stock ROM else it will brick your phone
http://forum.xda-developers.com/moto-g-2014/development/restore-to-stock-t2873657
Click to expand...
Click to collapse
thanks bro....

Help me to root infinix hot 2 x510 sprout (Android 6.0)

hello all the world , please help me to root my infinix hot 2 (i try Android one toolkit , it do not work) .
I can go into recovery too !!! . :crying:
when i use Android one toolkit for unlock bootloader , my button " up " do not work !!!
pleaseeee help me

killua# said:
hello all the world , please help me to root my infinix hot 2 (i try Android one toolkit , it do not work) .
I can go into recovery too !!! . :crying:
when i use Android one toolkit for unlock bootloader , my button " up " do not work !!!
pleaseeee help me
Click to expand...
Click to collapse
i don't know how to root, but use minimal adb and command : adb reboot recovery
after it press button and vol up to see recovery menu

killua# said:
hello all the world , please help me to root my infinix hot 2 (i try Android one toolkit , it do not work) .
I can go into recovery too !!! . :crying:
when i use Android one toolkit for unlock bootloader , my button " up " do not work !!!
pleaseeee help me
Click to expand...
Click to collapse
First install TWRP and then Install latest SuperSU Flashable.zip (2.68 - newest).
hope this help you and DWYOR :good:

ArticK said:
First install TWRP and then Install latest SuperSU Flashable.zip (2.68 - newest).
hope this help you and DWYOR :good:
Click to expand...
Click to collapse
Use root king or king root. Don't remember the exact name.

ruftas said:
Use root king or king root. Don't remember the exact name.
Click to expand...
Click to collapse
as I know kingroot is not work until now to root lollipop and / or marshmallow

root marshmallow infinix hot 2
ArticK said:
as I know kingroot is not work until now to root lollipop and / or marshmallow
Click to expand...
Click to collapse
- install vcom drivers. tuto : http://www.guruswizard.com/2015/10/steps-to-install-mediatek-usb-vcom-drivers.html
- Download SuperSU2.66.zip at http://hovatek.com/redirect.php?lin...=0B9srKhKuVIMnZHlTVjhrVEJjdWM&export=download
- Copy the SuperSU2.66.zip to the phone’s internal / phone storage
- load the scatter file of enabler with with sp flash tool. enabler link : https://www.androidfilehost.com/?fid=24269982086997892
- remove the preloader file case only and flash
- load the scatter file of marshmallow with sp flash tool, remove all cases except preloader and flash. marshmallow link : https://docs.google.com/uc?id=0B1ukKq9qHhpBT20ycjJMbHM3ZVE
- download and flash twrp 3.0 with sp flash tool . twrp link : http://qc4.androidfilehost.com/dl/T...1970726/TWRP_3.0_Repacked_for_X510-D5110.zip?
- Once flashing is complete, boot the phone straight into recovery mode using Volume up button + Power button
- In TWRP recovery, Navigate to the location of the SuperSU.zip and select it, Swipe to confirm flashing and wait till flashing is complete
- clear cache and reboot phone. you will see super su
i don't speak english very well

Download SP flash tool
Flash recovery enabler
Flash recovery TWRP or CWM
Flash supersu via recovery

This procedure is causing a bootloop
remedb said:
- install vcom drivers. tuto : http://www.guruswizard.com/2015/10/steps-to-install-mediatek-usb-vcom-drivers.html
- Download SuperSU2.66.zip at http://hovatek.com/redirect.php?lin...=0B9srKhKuVIMnZHlTVjhrVEJjdWM&export=download
- Copy the SuperSU2.66.zip to the phone’s internal / phone storage
- load the scatter file of enabler with with sp flash tool. enabler link : https://www.androidfilehost.com/?fid=24269982086997892
- remove the preloader file case only and flash
- load the scatter file of marshmallow with sp flash tool, remove all cases except preloader and flash. marshmallow link : https://docs.google.com/uc?id=0B1ukKq9qHhpBT20ycjJMbHM3ZVE
- download and flash twrp 3.0 with sp flash tool . twrp link : http://qc4.androidfilehost.com/dl/T...1970726/TWRP_3.0_Repacked_for_X510-D5110.zip?
- Once flashing is complete, boot the phone straight into recovery mode using Volume up button + Power button
- In TWRP recovery, Navigate to the location of the SuperSU.zip and select it, Swipe to confirm flashing and wait till flashing is complete
- clear cache and reboot phone. you will see super su
i don't speak english very well
Click to expand...
Click to collapse
If you have followed this procedure you may experience a bootloop. It is caused by the "enabler". My phone would boot fine before flashing the enabler but after, I was stuck on the Infinix logo. Tried factory format, wiping data, wiping cache, wiping dalvik cache and even flashing the whole ROM whole again, nothing helped. It would boot only before flashing the enabler. I finally got this post on Hovatek and realized one step was missing from this thread on xda. You are supposed to flash back the unmodified preloader, this enabler (modified preloader) can't boot into system, it can only boot into recovery. This is the only step missing here and it's very important. Thank you all. I now have my device rooted.:good:
My device
Infinix hot 2 x510
1GB RAM
Android One marshmallow.