Database Develop

[Q] Samsung Galaxy Note Will not On?(BLACK SCREEN)

i have a samsung galaxy note(GT-N7000) and it was working fine until
i accidentally flashed a samsung Galaxy SII STOCK firmware on it from Odin the flasing completed successfully but the device is with a black screen does not boot to download mode or recovery mode.
Please i need a solution

Have you tried a battery pull? Leave battery out of Note for about two-to-three minutes. Then try booting into recovery mode again?
Are you using volume up+ home then hold power until you get welcome screen for recovery?
If you have a backup from when you first got your note, try download mode - volume down + home then hold power until you get the welcome splash screen.

Still Not Working!!!
TempusFudgeIt said:
Have you tried a battery pull? Leave battery out of Note for about two-to-three minutes. Then try booting into recovery mode again?
Are you using volume up+ home then hold power until you get welcome screen for recovery?
If you have a backup from when you first got your note, try download mode - volume down + home then hold power until you get the welcome splash screen.
Click to expand...
Click to collapse
i tried but it will not boot at all no recovery mode no download mode
But it was working before i accidentally flash SII Firmware
is there a way to flash back the note firmware without going to download mode because the device will not boot

Help!!!
Please Reply Devolopers

While your Note is connected to PC Odin, try to get into download mode (vol down + home + power) then vol up, until you see there is connection in Odin (COM:ID turns yellow). Hopefully you still have 'life' there but just no screen/sound. Once you have that, flash a Note's firmware.

Sorry to say mate but your next and the only step is nearest samsung service center! :-(
BOOMED from my BOMBASTIC NOTE

betatest512 said:
i have a samsung galaxy note(GT-N7000) and it was working fine until
i accidentally flashed a samsung Galaxy SII STOCK firmware on it from Odin the flasing completed successfully but the device is with a black screen does not boot to download mode or recovery mode.
Please i need a solution
Click to expand...
Click to collapse
Please do this:
1. Replace battery
2. Insert batery
3. Hold down volume key + home key + power key for 15s to 20s
4. Press volume up key
5. Open Odin
6. connect your phone to pc
7. flash new bootloader(2.tar) by odin
Please see this link: http://forum.xda-developers.com/showthread.php?t=1354888
and download attachment file then extract it and choose 2.tar to flash.
After complete your phone can boot to download mod and you must flash original rom for galaxy note by download form www.sammobile.com
Good luck.

Wrong flash file
Happend to me to because av samfirmware´s system to list other phones firmware under the categorie "Latest Firmware" after searching for N7000....not good at all.
Of course i should have read more careful but after flashing cells since a few years back i did not think i could fall for that ;-)
So flashing the bootloader helped me back on track, got the screen back and started over with original fw. Thanks for the tip!

same problem here
i tried your answer. still no live on computer what should i do. phone is samsung galaxy note SHV-E160K
ysambo said:
Please do this:
1. Replace battery
2. Insert batery
3. Hold down volume key + home key + power key for 15s to 20s
4. Press volume up key
5. Open Odin
6. connect your phone to pc
7. flash new bootloader(2.tar) by odin
Please see this link: http://forum.xda-developers.com/showthread.php?t=1354888
and download attachment file then extract it and choose 2.tar to flash.
After complete your phone can boot to download mod and you must flash original rom for galaxy note by download form www.sammobile.com
Good luck.
Click to expand...
Click to collapse

ysambo said:
Please do this:
1. Replace battery
2. Insert batery
3. Hold down volume key + home key + power key for 15s to 20s
4. Press volume up key
5. Open Odin
6. connect your phone to pc
7. flash new bootloader(2.tar) by odin
Please see this link: http://forum.xda-developers.com/showthread.php?t=1354888
and download attachment file then extract it and choose 2.tar to flash.
After complete your phone can boot to download mod and you must flash original rom for galaxy note by download form www.sammobile.com
Good luck.
Click to expand...
Click to collapse
Thanks i found this... i've managed to get the download mode back and restore original firmware.. thanks bro :good:
lentzit said:
Happend to me to because av samfirmware´s system to list other phones firmware under the categorie "Latest Firmware" after searching for N7000....not good at all.
Of course i should have read more careful but after flashing cells since a few years back i did not think i could fall for that
So flashing the bootloader helped me back on track, got the screen back and started over with original fw. Thanks for the tip!
Click to expand...
Click to collapse
Yeahh me too, has the same problem and solved it

ysambo said:
Please do this:
1. Replace battery
2. Insert batery
3. Hold down volume key + home key + power key for 15s to 20s
4. Press volume up key
5. Open Odin
6. connect your phone to pc
7. flash new bootloader(2.tar) by odin
Please see this link: http://forum.xda-developers.com/showthread.php?t=1354888
and download attachment file then extract it and choose 2.tar to flash.
After complete your phone can boot to download mod and you must flash original rom for galaxy note by download form www.sammobile.com
Good luck.
Click to expand...
Click to collapse
Wow dude.
This worked for me to.
I wanted to flash a Rom but it did not work.
So i flashed back to stock Rom that i downloaded from sammobile.
This resulted in a black screen. Flashed a earlier version...still black screen.
But i noticed that the phone worked normally accept the screen was black.
I tried a few thing's until i found this. Genius!
Thanks for sharing dude.

Hmm i tried the steps mentioned, I think i managed to flash the original n7000 firmware and rom, but unfortunately i still see black screen. I can hear the starting tone of samsung while booting up thought, so my system is still working, jz the screen is not. Oh boy, could that be hardware issue then? Anyone knows how to check?

[Q] Flash Custom ROM with Odin?

Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...

If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.

surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843

Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP

KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843

same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery

Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset

Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....

Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh

surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro

[Q] Soft Bricked Mini2?... Help plz

Hi guys, so i got a new Mini2, and... messed with it, pulled a firmware version from a dif zone by mistake... after i had cwm jena and clockworkz working, installed that asian firmware, and never got the phone to work again, tried several stock rom installs (17 and counting, with/without jena firmware download also), it just keeps doing the boot loop, and i can't access the Recovery menu (vol +/- home power buttons at start).
I've been reading all the meaningful threads here, tried doing button combination with battery, without and nothing seems to work.
Any and all help will be greatly appreciated.

Take it to samsung service senter if u got warranty and if isnt try to use another mini 2 battery but I think it may not work and try to press all butoms at same time for 2min and if nothing work buy or make a JTag
Sent from my GT-S6500D using xda app-developers app

go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot (ofc when samsung logo will appear don't hold keys). Try few times and it will work, if not 1st then another time. Do factory restet, reboot phone and take off battery. Turn on in download mode and install MD1 XEO stock and do again factory reset using trick from above (go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot.)

Worked...
brainscollector said:
go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot (ofc when samsung logo will appear don't hold keys). Try few times and it will work, if not 1st then another time. Do factory restet, reboot phone and take off battery. Turn on in download mode and install MD1 XEO stock and do again factory reset using trick from above (go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot.)
Click to expand...
Click to collapse
You sir... you are my new hero! key trick is pressing the recovery combination quick before logo appears and ... guess what i was holding the damn buttons so hard i was thinking they'd eventually lose pressure
My mini2 is alive :angel:

I'm glad to help you cheers

I have similar problem:
1. no recovery mode, only download mode
2. no matter what stock firmware I flash using odin I get bootloop
I tried the trick to go download mode > reject codition and then press the recovery mode combination but did not work
I wonder if there is a Cyanogen firmware in tar.md5 format so I can flash with odin ?

mihaivt said:
I have similar problem:
1. no recovery mode, only download mode
2. no matter what stock firmware I flash using odin I get bootloop
I tried the trick to go download mode > reject codition and then press the recovery mode combination but did not work
I wonder if there is a Cyanogen firmware in tar.md5 format so I can flash with odin ?
Click to expand...
Click to collapse
Did flash a incompatible kernel? Try flashing stock kernel, recovery adn ROM.

[Q] Soft Brick issue

Hi,
First time working with a samsung phone, so im not very used to some samsung realted soft.
I'm doing a favor to a friend, he came to this problem where his phone woudnt boot up, He says one day he run out of battery and coudl never turn it on again.
when i turn it on, it gets stucked at boot image (first attached image), if i try to charge the battery image appears but with the loading logo (the loading logo is not moving), he told me that he also tried with another battery and the same appeared.
For what i've read there is a download mode besides recovery mode. I think i have no problem entering download mode (3rd pic), even though i don't know how to use it, pressing a button does nothing, and pluggin it to a pc (drivers installed it) seems the same.
So i wanted to enter recovery mode, and trying o factory reset it, but when i try to enter most of times nothing happens, the others i get weird screen like the one i attached.
I'm not pretty sure how to preceed now. The only thing that appears to be working is the download mode. If that's the case, how can i flahs the stock firmware on it?
Thanks for reading!

jisola said:
Hi,
First time working with a samsung phone, so im not very used to some samsung realted soft.
I'm doing a favor to a friend, he came to this problem where his phone woudnt boot up, He says one day he run out of battery and coudl never turn it on again.
when i turn it on, it gets stucked at boot image (first attached image), if i try to charge the battery image appears but with the loading logo (the loading logo is not moving), he told me that he also tried with another battery and the same appeared.
For what i've read there is a download mode besides recovery mode. I think i have no problem entering download mode (3rd pic), even though i don't know how to use it, pressing a button does nothing, and pluggin it to a pc (drivers installed it) seems the same.
So i wanted to enter recovery mode, and trying o factory reset it, but when i try to enter most of times nothing happens, the others i get weird screen like the one i attached.
I'm not pretty sure how to preceed now. The only thing that appears to be working is the download mode. If that's the case, how can i flahs the stock firmware on it?
Thanks for reading!
Click to expand...
Click to collapse
You would do the same thing as if it were custom firmware, goto http://www.sammobile.com/firmwares/, and download the stock firmware compatible with the device
Enter the device in download mode and flash the stock firmware with Odin
Instructions by SamMobile self:
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minute

dolphinman310 said:
You would do the same thing as if it were custom firmware, goto http://www.sammobile.com/firmwares/, and download the stock firmware compatible with the device
Enter the device in download mode and flash the stock firmware with Odin
Instructions by SamMobile self:
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minute
Click to expand...
Click to collapse
thanks for the reply, i think i might be doing something wrong, ODIN failed, i attach a screenshot, any idea?

I cannot tell much from the screenshot to be honest, all i can point at would be a newer version of Odin as the instructions told: [LINK TO ODIN 3.09]

dolphinman310 said:
I cannot tell much from the screenshot to be honest, all i can point at would be a newer version of Odin as the instructions told: [LINK TO ODIN 3.09]
Click to expand...
Click to collapse
Same error as before
im downloading some other firmwares to try, but i dont think there is the problem :s

I've been having this issue for months now. It does that exact thing. Try removing the SIM card and starting the phone as normal and see what happens. If it starts then, we have the exact problem. Mine works perfectly WITHOUT the SIM card but....what's a phone without a SIM card right? I've tried putting the Stock ROM on to no avail as well. I think my thread about this is still somewhere around but I doubt anyone managed to solve the problem either.
If you do work something out post it back. Sorry I couldn't be much help.
E: just posting my thread http://forum.xda-developers.com/showthread.php?t=2778167

MESSED UP!!!!! TWRP FLASH FAILED, STUCK AT AWB FAIL

Hey fellow members,
I tried flashing TWRP on my M31 as anyone would, but I did not have a patched vbmeta file. I did it anyway because I thought I'd be able to restore it using ODIN no matter what. Or at least it was supposed to. But ODIN doesn't recognise the phone anymore. And any idea on how to get the phone to boot into normal ODIN download mode?

code_blanc said:
Hey fellow members,
I tried flashing TWRP on my M31 as anyone would, but I did not have a patched vbmeta file. I did it anyway because I thought I'd be able to restore it using ODIN no matter what. Or at least it was supposed to. But ODIN doesn't recognise the phone anymore. And any idea on how to get the phone to boot into normal ODIN download mode?
Click to expand...
Click to collapse
Press all buttons until it force reboots
As soon as black screen comes instantly release all buttons and power + volume down and connect to PC this should boot into download mode and as usually Flash ur stock rom

Thank you for the reply. I figured it out shortly after posting this question. Thanks for your help..

can someone help me also I cant get to the download mod and only stuck at Samsung logo with caution of this phone is not running Samsung official.

i tried this one but it didnt work
LMAO-guy said:
Press all buttons until it force reboots
As soon as black screen comes instantly release all buttons and power + volume down and connect to PC this should boot into download mode and as usually Flash ur stock rom
Click to expand...
Click to collapse

lawrenzdr said:
i tried this one but it didnt work
Click to expand...
Click to collapse
If this method didn't work, maybe it has a hardware issue so check ur phone in any repair shop

lawrenzdr said:
can someone help me also I cant get to the download mod and only stuck at Samsung logo with caution of this phone is not running Samsung official.
Click to expand...
Click to collapse
There must have been written something like "you are not using official software press the power key to continue".
So, Just press the power key.

LMAO-guy said:
Press all buttons until it force reboots
As soon as black screen comes instantly release all buttons and power + volume down and connect to PC this should boot into download mode and as usually Flash ur stock rom
Click to expand...
Click to collapse
mine also same problem done above thing did'nt work, could u help my problem
Error verifying vbmeta image: invalid vbmeta header (6) VBMETA M315FXXU3CVH1, 54678140R
Trying to root my galaxy M31 by flashing a TWRP recovery file but I got this above error!... Finally end up with... Neither I can restart phone (volume down + power) coming to same screen nor enter to TWRP recovery mode (volume up + power) also...
forum.xda-developers.com

Root sonrası parmakızı çalışmıyor, bu sorun nasıl çozebilirim
Fingerprint does not work after root, how can I solve this problem?

Roottan sonra parmak izi çalışmıyor, bu sorunu nasıl çözebilirim?Fingerprint does not work after root, how can I solve this problem?