Night Everyone,
I just ordered a D950 LG G Flex AT&T, and i havent received it yet, however, i wanted to ask some stuff.
Im not a newbie on the android section, but each hpone acts different, as example, i had a E980 [LG G PRO AT&T] before this one, and wha ti know, is that, removing any carrier system app, using any root explorer, managed to get stuck at the boot screen on the device, saying, Security Error, and then had to reflash it again using the KDZ or the TOT method.
I wanted to ask, if its the same thing with the D950, if i remove the system apps from AT&T, will my device stuck at the Boot Screen with any kind of Security Error message?, since there is not much action on the development of this phone, i wanted to know before start messing with it.
I saw the ROOT method and everything, as soon as i get it i will root it and set TWRP or CWM, however, even on the E980, when the security error appeared, it was almost a 100% rate to flash it with a KDZ to get it working again, and i was curious if this was the same thing with the D950.
Also, i saw the Hyelton guide, its the same one to flash the KDZ, but since the E980 Bootloader was locked if i remember right, and it was needed to be lokified in order to isntall a custom recovery, is the bootloader of the D950 locked? will i face the same issues while trying to remove the system apps, i used to mod my R800X and my E980 ALOT, LIKE 5 flashes at day, both of them, and now i just wanna keep my phone without bloatware, and remove the system apps from AT&T.
So, im open to any idea/suggestion/advices or whatsoever.
p.d. Sorry for my mistakes if any~
Weekly bump!
Related
Hey everyone!
First off, I apologize if I am posting this in the wrong area, as this is my first post here.
About two months ago, I used TowelRoot on my phone and achieved root status. Afterwards, I installed Xposed Framework and started loading modules. When AT&T pushed out an OTA update which updated the kernel, making rooting impossible once again, I did lose my root status. However, Xposed Framework and all of my modules remained installed and still function.
The interesting part is, after a reboot, I noticed that my boot splash screen says "Samsung Galaxy S5 Active", and "Custom" with the unlocked padlock at the bottom. Also, under device status, it says "custom" instead of "official".
I haven't attempted to flash a custom recovery on this phone, but what I'd really like to know is -- is my device's bootloader unlocked now, can I flash a recovery on it, and is there any ROM like a Cyanogenmod base that will be compatible with this phone? I haven't had any luck with researching it because everyone with the AT&T variant of this phone has a locked bootloader, so there hasn't been much opportunity to play with it.
I'd appreciate any help I can get on the matter. I'd like to see what this thing is capable of!
dont mess with itttt leave it until someone replies we need to extract your firmware, hold onto it if you not messing around, im not experinced enough but someone will pm you im sure
MGArcher007 said:
Hey everyone!
First off, I apologize if I am posting this in the wrong area, as this is my first post here.
About two months ago, I used TowelRoot on my phone and achieved root status. Afterwards, I installed Xposed Framework and started loading modules. When AT&T pushed out an OTA update which updated the kernel, making rooting impossible once again, I did lose my root status. However, Xposed Framework and all of my modules remained installed and still function.
The interesting part is, after a reboot, I noticed that my boot splash screen says "Samsung Galaxy S5 Active", and "Custom" with the unlocked padlock at the bottom. Also, under device status, it says "custom" instead of "official".
I haven't attempted to flash a custom recovery on this phone, but what I'd really like to know is -- is my device's bootloader unlocked now, can I flash a recovery on it, and is there any ROM like a Cyanogenmod base that will be compatible with this phone? I haven't had any luck with researching it because everyone with the AT&T variant of this phone has a locked bootloader, so there hasn't been much opportunity to play with it.
I'd appreciate any help I can get on the matter. I'd like to see what this thing is capable of!
Click to expand...
Click to collapse
MGArcher007 said:
Hey everyone!
First off, I apologize if I am posting this in the wrong area, as this is my first post here.
About two months ago, I used TowelRoot on my phone and achieved root status. Afterwards, I installed Xposed Framework and started loading modules. When AT&T pushed out an OTA update which updated the kernel, making rooting impossible once again, I did lose my root status. However, Xposed Framework and all of my modules remained installed and still function.
The interesting part is, after a reboot, I noticed that my boot splash screen says "Samsung Galaxy S5 Active", and "Custom" with the unlocked padlock at the bottom. Also, under device status, it says "custom" instead of "official".
I haven't attempted to flash a custom recovery on this phone, but what I'd really like to know is -- is my device's bootloader unlocked now, can I flash a recovery on it, and is there any ROM like a Cyanogenmod base that will be compatible with this phone? I haven't had any luck with researching it because everyone with the AT&T variant of this phone has a locked bootloader, so there hasn't been much opportunity to play with it.
I'd appreciate any help I can get on the matter. I'd like to see what this thing is capable of!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=54642044
Sent from my SAMSUNG-SM-G900A using XDA Premium HD app
Apparently there are many different circumstances under which the splash screen says custom, which have nothing to do with the bootloader being locked or unlocked. I seem to recall it showing up for people when they just switched to ART runtime, and in some cases it didn't even go back when they switched back to Dalvik. Many of the methods for making this not appear just involve cosmetically hiding it, not actually cleaning up whatever it is that is being detected.
What I wouldn't give to have this bootloader unlocked
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
If there is a dev that wants a s5 to experiment with to get the bootloader unlocked I'll be happy to donate my s5 if I can get it back after finding an exploit . But the dev needs to come with unanimous recommendation by the devs. Let me know I can still use my s3.
Sent from my SAMSUNG-SM-T537A using XDA Free mobile app
Aw man, I was really hoping that the bootloader just somehow magically unlocked itself. Wishful thinking, I suppose. I love my S5 Active, I just wish I had a little more freedom with customizing it in ways like I could my S3.
I wonder if this is a result of Knox being disabled during the root... Either way, I hope I'll still receive OTA updates for things like 4.4.4 if they ever decide to release it, and eventually Android L.
For now, I can't complain -- surprisingly enough, even without root, my Xposed Framework still functions very well and I can still make backend and UI changes in GravityBox.
Regardless, thanks for all the replies, guys! I probably won't mess with trying to fix it unless they come out with an OTA update that I can't get as a result of this.
MGArcher007 said:
Aw man, I was really hoping that the bootloader just somehow magically unlocked itself. Wishful thinking, I suppose. I love my S5 Active, I just wish I had a little more freedom with customizing it in ways like I could my S3.
I wonder if this is a result of Knox being disabled during the root... Either way, I hope I'll still receive OTA updates for things like 4.4.4 if they ever decide to release it, and eventually Android L.
For now, I can't complain -- surprisingly enough, even without root, my Xposed Framework still functions very well and I can still make backend and UI changes in GravityBox.
Regardless, thanks for all the replies, guys! I probably won't mess with trying to fix it unless they come out with an OTA update that I can't get as a result of this.
Click to expand...
Click to collapse
Sadly. ...We may never see the bootloader unlocked without a factory method...
It's encryption prevents us from even being able to open it into a usable state...
We need either an encryption key....or a new bootloader entirely...
Not happening any time soon....g
In the past, I have had updated a few times on root without facing a single problem, until yesterday, when I received the Lollipop update which weighs 776.73mb and stops updating in the very beginning before running into some error 0x11110000.
So, question is that is it possible to update ON ROOT ?
I know using SuperSU unroot one can't change the LG RCT check, but what's interesting is that after making a second attempt to update, IT STARTS ALL OVER AGAIN. I mean, downloading 776.73mb multiple times isn't going to reduce your data bills
Any ideas ?
Rooted. Stock ROM.
EDIT
Fixed it by performing a full 'unroot' inside of SuperSU and then using the LG PC Tool to update to Lollipop Well, I'm rather surprised that it worked when the same didn't work on the phone itself. So I'm guessing that the process used by the tool overrides all problems as long as the firmware remains stock.
Oh and I really didn't want to mess up that bad by taking the route suggested in that thread, @lfom, because I don't have an extra phone to fall back on, in case my current one fails to work
Modern SU tools also modify other system files, primarily to try to resist to updates... My bet that what is causing the problem is the same as this other thread (it offers a solution too):
http://forum.xda-developers.com/showpost.php?p=44913304&postcount=8
Actually , i updated my phone with root using LG tool, after update i lost my root but all apps where there, which means there is no need for unroot os something like that.
Hello all. I Recently attempted rooting my phone, running on 5.0.2, and it seemed to have worked. But then after attempting to use SuperSU to add root permissions to an app, my screen went black, and the only thing visible was the top status bar, which had some animations still running (Like the battery icon filling up or the signal bars changing), but thats it. It wasn't responsive to any of my button presses, and then it shut off. It keeps doing this over and over, and i cant keep the phone on for more than 5 mins maybe 10. How would I fix this? I used this "tutorial". - andromods .com/news-root/lg-g3-g-flex-2-g2-lollipop-one-click.html - (Stupid thing wont let me post links)
I would like to solve this without factory resetting, as I have apps that have data on them that needs to be transferred from one phone to another, and i dont have a second phone to transfer to at the moment.
Thanks in advance.
As far as I know, flashing kdz with LG Flash Tool following the tutorial to "unroot" won't delete your data, but you will lose root, of course. If you don't have custom recovery nor root, there is little else you can do. Do you have adb root (shell)? If yes you can try re-flashing system partition...
lfom said:
As far as I know, flashing kdz with LG Flash Tool following the tutorial to "unroot" won't delete your data, but you will lose root, of course. If you don't have custom recovery nor root, there is little else you can do. Do you have adb root (shell)? If yes you can try re-flashing system partition...
Click to expand...
Click to collapse
I'm very new to this, and probably shouldnt have attempted this without knowing more, so I have no idea what you are asking me. What is ADB root (shell)? I probably dont have it. And I didnt do any sort of custom recovery. But it seems that me messing around with SuperSU (clicking the uninstall root/turning of superuser once or twice) seems to have stopped the crashing all together. Ive been using my phone since and it hasnt crashed. Whether or not that's fixed the real issue, I don't know. And I'm not sure I want to mess with it further. :crying:
Since there are not too many stable ROMs available on the XT1096 that support CDMA (I am using Verizon's network). I decided I would unlock my bootloader, flash TWRP and root the stock firmware. Well, the past few days I guess I did not update my phone all the way before doing this since I just got it not even a week ago and keep getting prompts to install an OTA. This will obviously not work with TWRP and when I flashed TWRP I selected to modify the system so the stock firmware would not rewrite recovery on boot. This has become a complete pain in the ass for me. Accidently I selected to install the OTA since it is always in my notifications and when it happened it would obviously fail in TWRP but then it would boot back into the ROM and then power cycle back into TWRP. The only way to stop it was to do a factory reset which is not what I would like to do every time I accidently select to install this OTA. So my questions to you awesome people who know more about this device are. 1. is there a way I can enable the to option to where I will always have a stock recovery and then I can just fastboot boot into TWRP if needed? Or is there another way where I can just possibly stop this OTA all together even though the prompt already says it's downloaded and waiting for me to hit install. Like can I just go into rootexplorrer and delete or modify a few system files that'll stop the phone for looking for OTAs? I don't reallyl care about the OTA since it's obviously not 6.0 since VZW got boned on that one. Looks like it's just some security patches.
I'm sure this is probably a really stupid and simple question, so I apologize in advance. But thank you SO MUCH to anyone who decides to help me out. I will appreciate it GREATLY!!!
aeb401 said:
Since there are not too many stable ROMs available on the XT1096 that support CDMA (I am using Verizon's network). I decided I would unlock my bootloader, flash TWRP and root the stock firmware. Well, the past few days I guess I did not update my phone all the way before doing this since I just got it not even a week ago and keep getting prompts to install an OTA. This will obviously not work with TWRP and when I flashed TWRP I selected to modify the system so the stock firmware would not rewrite recovery on boot. This has become a complete pain in the ass for me. Accidently I selected to install the OTA since it is always in my notifications and when it happened it would obviously fail in TWRP but then it would boot back into the ROM and then power cycle back into TWRP. The only way to stop it was to do a factory reset which is not what I would like to do every time I accidently select to install this OTA. So my questions to you awesome people who know more about this device are. 1. is there a way I can enable the to option to where I will always have a stock recovery and then I can just fastboot boot into TWRP if needed? Or is there another way where I can just possibly stop this OTA all together even though the prompt already says it's downloaded and waiting for me to hit install. Like can I just go into rootexplorrer and delete or modify a few system files that'll stop the phone for looking for OTAs? I don't reallyl care about the OTA since it's obviously not 6.0 since VZW got boned on that one. Looks like it's just some security patches.
I'm sure this is probably a really stupid and simple question, so I apologize in advance. But thank you SO MUCH to anyone who decides to help me out. I will appreciate it GREATLY!!!
Click to expand...
Click to collapse
Try using your favorite applications manager for root and freeze MotorolaOTA. This will prevent the update from being downloaded and you won't get messages about installing the OTA update.
newbie warning: don't re-lock bootloader, and beware flashing any custom ROM. &OTA...
only modify a phone you are willing to throw away.......
##
pre-note: TWRP 3.3.1-0 -> fastboot boot twrp.img (this is temporary)
before doing anything, backup some little partitions: EFS, fsg, Vendor. Maybe others. You will need these to get back to a working stock.
##
$$
DO AT YOUR OWN RISK - I TAKE NO RESPONSIBILITY.
note added 2-27-2020: it may be that some problems with returning to stock are due to not (in TWRP) advanced wiping data, system, dalvik ART cache before flashing. You can do temp "fastboot boot twrp-3.3.1-0-payton.img" w/o quotes, and do it there. -changed/edited. don't use TWRP to flash a stock zip!
$$
NO FIX IS KNOWN FOR ANY OF THESE PROBLEMS. PHONE IS DESTROYED.
newbie warning: don't re-lock bootloader, and beware flashing ANY custom ROM.
On the X4, the bootloader changes drastically between 8 and 9 as it introduces a dual file system which is used by OTA updates to alternate the live system, and as a backup if failure. It is not a true Treble system, only partial. You must not depend on being able to flash back and forth between O and P. If you update to P, stay there. I expect this to be exacerbated by those phones which update to 10, if that in fact happens(probably One/fi only). There is also much confusion as to which file system/setup any custom ROM uses, and thus, how you would get back to stock, if that is even possible. Be very careful and assure yourself that you are fully willing to lose permanently your new phone before you do anything. Please read posts in these forums.
I've seen many posts of folks, mostly noobs, who have flashed ANY custom ROM Lineage and are unable to get back to a working stock. Sounds super simple but apparently it's not. Best to assume that if you try things, especially Lineage, that you will never be able to get back to a working stock. Read a bunch of posts here and you will realize that.
I've also seen a bunch of folks on this phone, and other phones who have run a bat file to flash their phone which contains the line
"fastboot oem lock" or similar.
Don't do it!!! - This will lock your phone and you will never be able to do anything with it again. It is totally unnecessary to lock your phone. Folks who should know better are leaving bat files lying around with this command. If you use one of those bat files to flash your phone, just check and remove that command line. Else you will have destroyed your phone. That's one of those things that "sounds good" until you do it.
EDIT: You can run stock on a bootloader unlocked phone - I do it all the time - plays PoGo just fine. I don't know about banking apps - I don't use them as I assume any 10-year-old can and will hack my phone.
EDIT: 6Feb2020: folks are reporting taking a security OTA onto a modified phone and rendering their phone(s) unusable. Only take OTA to a pure unmodified (no Majisk ever on it)(etc)(no mods ever on it)(stock recovery)(etc) stock ROM. Heed this warning. All of these "temporary" mods leave traces that screw up the update process.
EDIT: this was successfully fixed. see: https://forum.xda-developers.com/moto-x4/help/ota-update-endless-fail-loop-ppws29-69-t4045771 my guess is only works if you haven't changed bootloader or file system - NO custom ROM.
NO FIX IS KNOWN FOR ANY OF THESE PROBLEMS. PHONE IS DESTROYED.
Please do a lot of reading here before you try to modify your phone, unless you are totally willing to render it useless. A word to the wise.
Ahah ))) I bought today X4 with relocked BL and I it seems it was relocked after flashing LOS or similar )) )
Now I trying to recover it ))
Сan we boot phone to QC9008 (EDL) mode without testpoiint?
St.Noigel said:
Ahah ))) I bought today X4 with relocked BL and I it seems it was relocked after flashing LOS or similar )) )
Now I trying to recover it ))
Сan we boot phone to QC9008 (EDL) mode without testpoiint?
Click to expand...
Click to collapse
afaik, you can't. Return the phone and get your money back. There will probably be a bunch of these worthless phones put up for sale. If you can't return it you could try the suggestions of sd_shadow in other threads here, but I don't believe they were successful on the X4.
KrisM22 said:
afaik, you can't. Return the phone and get your money back. There will probably be a bunch of these worthless phones put up for sale. If you can't return it you could try the suggestions of sd_shadow in other threads here, but I don't believe they were successful on the X4.
Click to expand...
Click to collapse
OK. But I unbrick it. Now I have fully loaded system, but without WiFi ot mobile network.. It`s problem - I can`t turn on OEM unlocking.. (
Goшng to try to find solution
UPD. Everything work well now. But it my device I have custom stock flashed. Not sure it`ll work with LOS onboard
its to late for me
llue45 said:
its to late for me
Click to expand...
Click to collapse
Yeah, I know. You're one reason I posted this.
modified OP
change: from "Lineage" to "any custom ROM"
hi im thinking about buy this phone for 100 bucks used how i can verify this relocked bootloader problem ? in Developer Options ? if i cant switch to Oem Unlocking its broken ? to make sure this dont happen to me the one who its selling it to me says that already its updated to PIE , i want stock and root it just that after unlock the bootloader but if cant be unlocked i better move on . so my question is what really im looking for , when i get my hands on the phone before drop my money to the thin air because is not a store . and maybe never see this guy again in my life , i Live In The Caribbean Dominican Republic
People here are not so trusty . so i will appreciate if i can have some tips to know if im going to do a good Buy. Thanks In Advance .
JavaShin said:
hi im thinking about buy this phone for 100 bucks used how i can verify this relocked bootloader problem ? in Developer Options ? if i cant switch to Oem Unlocking its broken ? to make sure this dont happen to me the one who its selling it to me says that already its updated to PIE , i want stock and root it just that after unlock the bootloader but if cant be unlocked i better move on . so my question is what really im looking for , when i get my hands on the phone before drop my money to the thin air because is not a store . and maybe never see this guy again in my life , i Live In The Caribbean Dominican Republic
People here are not so trusty . so i will appreciate if i can have some tips to know if im going to do a good Buy. Thanks In Advance .
Click to expand...
Click to collapse
Good to not be trusting!!!! With this (or any) phone, I recommend you get only from a place (like ebay) where you can easily return it and get your money back. ebay can force a reluctant seller to refund your money. Assure that the seller has a 99% + rating and says they will accept returns and pay for return shipment, usually for 30 days. I don't think you can easily tell if it has been unlocked and re-locked - only that it works perfectly, or doesn't. You can check the ID of the ROM in your phone against the latest for your area by checking lolinet.
When you get it, check all functions and assure IMEI is present. check wifi, BT, etc etc. Make calls. Check that the phone works with the towers in your area and with a local SIM. etc etc. read here and find the things that folks having problems where it won't do things and assure your phone will do it. Install Pokemon Go on it and play it briefly to assure your phone hasn't been modified. I have no idea if any of these phone will work with any banking or payment apps, and each app will have it's own specific checks that it performs against the phone. Test what you will use. Fully. ASSUME NOTHING!!!
As far as rooting it and/or unlocking it, I would strongly advise against it. For this particular phone X4 I would determine that it works perfectly and then NOT modify it. Unless, of course, you are willing to throw your phone away and buy a new one without a second thought(most of us don't have that kind of money!). Mine happened to have been unlocked when I got it from ebay but it was on a stock 8.1 and it was able to, and did OTA update to the latest Pie stock ROM. Thus I was easily able to assure if was okay. It being unlocked seems to have affected nothing. I have never tried to root it or do anything to it (recovery or otherwise) as I read far too many posts of folks here who had rendered their phones incapable of returning to a working stock, and only on a limited custom. Not what I wanted. I have not heard of anyone successfully getting one of these phones back to a FULLY WORKING stock state.
The days of getting a phone and easily modifying it and then returning it to stock may be gone. Get a phone you will enjoy, and use it! Unmodified!!! Welcome to pre-Treble part1a . Expect a few years of growing pains.
I like my phone and enjoy not having to worry about whether a custom ROM will work and constantly be chasing updates and fixes. I use a case - I believe it is this one
https://www.ebay.com/itm/For-Motoro...hash=item33d89fee5a:m:mU5XV7jSj1TfD_kr-L4VT9g
which, so far, has protected it from several minor falls. I would never use any phone w/o a case!!!
But i think if the phone gets unlocked the bootloader and flash twrp making a backup of the stock recovery before just booting the twrp custom recovery then flash magisk on twrp on top of Stock PIE , After Of Course Make A Full Backup Of all partitions reboot and then on Stock PIE have ROOT. and never flash custom roms and never lock the bootloader and stock can be reflashed without problems with a script on linux with fastboot on bootloader-fastboot mode this plan can work , NO ? i had a E4 sprint and never had problems doing that
I need root for A Lot Of Things like Xposed Drivedroid Youtube vanced Adway ETC.
Can Anyone who is reading this have done this just root pie on this phone with unlocked bootloader ? and able to restore stock flashing it back with the retail firmware just to remove root and clean the stock and recovery ? or try to put android one ? the phone which im going to buy its the XT1900-6 retail brazil i already have the retail stock official pie rom ready to flash and with the script on linux with no fastboot oem lock anywhere .
added to OP: EDIT: 2-6-2020 folks are reporting taking a security OTA onto a modified phone and rendering their phone(s) unusable. Only take OTA to a pure unmodified (no Majisk ever on it)(etc)(no mods ever on it)(stock recovery)(etc) stock ROM. Heed this warning. All of these "temporary" mods leave traces that screw up the update process.
OTA issues
KrisM22 said:
added to OP: EDIT: 2-6-2020 folks are reporting taking a security OTA onto a modified phone and rendering their phone(s) unusable. Only take OTA to a pure unmodified (no Majisk ever on it)(etc)(no mods ever on it)(stock recovery)(etc) stock ROM. Heed this warning. All of these "temporary" mods leave traces that screw up the update process.
Click to expand...
Click to collapse
I posted a new thread on these OTA issues with the X4 at https://forum.xda-developers.com/moto-x4/help/ota-update-endless-fail-loop-ppws29-69-t4045771. I was never presented with an "option" to install the latest OTA, it just automatically attempted to install (apparently a FORCED update) and is continuing to do so and failing ad infinitum. That phone works, just getting constant failure notifications. Question is, how to stop the attempted updates?
The second identical phone (updated per Magisk OTA tutorial instructions) is borked, with no phone connectivity. Can these be recovered by wiping/flashing stock rom PPWS29.60-39-6-2 and get them operating again as stock? I can forego the OTAs if there's a way to stop them from screwing up the device.
I never had other than stock recovery on either of these phones, I always boot TWRP via fastboot to do mods.
EDIT: XDA system is stalling and caused double post. Sorry. Mod please delete.
-deleted by me -
@redwoodie , please don't post to this thread. I read all your threads/posts but have no information.
NO FIX IS KNOWN FOR ANY OF THESE PROBLEMS. PHONE IS DESTROYED.
As to whether "x" strategy will work, you are certainly free to explore that on your own, in your own thread.
No one here knows. I am certainly not going to experiment on my own phone and run the likelihood of having to buy a new one. Folks like yourself keep showing up and doing just that because they are SURE it will work. But it hasn't.
Read all the posts.
There are very few folks left here on this forum. Once they have destroyed their phone, and tried a bunch of things, they move on.
THERE IS NO SOLUTION.
This thread is only to warn newbies.
I personally know nothing about the phone other than what has been posted by others.
Read it.
If you discover a true solution that allows a phone to work perfectly ON STOCK, please post it and you will make lots of folks happy, assuming it is repeatable.
However, no known solution.
But, again, you are free to explore solutions - just not in this thread, please. Thanks.
added paragraph at top:
$$
DO AT YOUR OWN RISK - I TAKE NO RESPONSIBILITY.
note added 2-27-2020: it may be that some problems with returning to stock are due to not (in TWRP) advanced wiping data, system, dalvik-ART-cache before flashing. You can do temp "fastboot boot twrp-3.3.1-0-payton.img" w/o quotes, and do it there. -changed/edited. don't use TWRP to flash a stock zip!
This guy is full of crap
KrisM22 said:
only modify a phone you are willing to throw away.......
NO FIX IS KNOWN FOR ANY OF THESE PROBLEMS. PHONE IS DESTROYED.
Please do a lot of reading here before you try to modify your phone, unless you are totally willing to render it useless. A word to the wise.
Click to expand...
Click to collapse
I've literally put so many different custom ROMs on this phone. I've bricked it, unbricked, hard bricked it and soft bricked it. Stop misinforming people bro. The Moto G6 I would say to be careful with but still I wouldn't make a post like this guy. The Moto x4 just requires a little prep to make it a full treble, GSI accepting, custom Rom beast. Plus there are a few official ROMs out there even Android 10 for the Moto x4 specifically. Don't be scared. Just research a lot and follow instructions
---------- Post added at 03:28 PM ---------- Previous post was at 03:24 PM ----------
JavaShin said:
But i think if the phone gets unlocked the bootloader and flash twrp making a backup of the stock recovery before just booting the twrp custom recovery then flash magisk on twrp on top of Stock PIE , After Of Course Make A Full Backup Of all partitions reboot and then on Stock PIE have ROOT. and never flash custom roms and never lock the bootloader and stock can be reflashed without problems with a script on linux with fastboot on bootloader-fastboot mode this plan can work , NO ? i had a E4 sprint and never had problems doing that
I need root for A Lot Of Things like Xposed Drivedroid Youtube vanced Adway ETC.
Can Anyone who is reading this have done this just root pie on this phone with unlocked bootloader ? and able to restore stock flashing it back with the retail firmware just to remove root and clean the stock and recovery ? or try to put android one ? the phone which im going to buy its the XT1900-6 retail brazil i already have the retail stock official pie rom ready to flash and with the script on linux with no fastboot oem lock anywhere .
Click to expand...
Click to collapse
The op is a cracker Jack
Ims status not registered
Guys i flashed custom rom without taking backups of efs and all,so i ended up with ims status not registered because of that my volte is broken mine is retin.I tried to flash stock firmware but the imei is broken.Any way to fix this?
bumpsi since apparently folks are not reading this. mod a phone, likely lose it. relock a phone and def lose it.