Database Develop

I no longer have AT&T 3G network coverage ..

I have a Rogers G1 that I use with AT&T's service. When I first received the phone (yesterday), AT&T's 3G service was working fine and it even had an option to enable|disable the 3G signal in the settings. However, after I decided to flash the SPL, radio, etc. (after everything, I've decided to stick with Cyanogen 4.2.14.1), my 3G signal no longer works, as I only have EDGE coverage AND there is no setting in the phone that even mentions HSDPA or 3G enabling. I know it's not the ROM that did this, since I was using the Expresso, MLIGN's 3.3 and another ROM. So basically.. How do I get my 3G signal back??? Thanks in advance!
My current G1 info:
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA21000)
CPLD-4
RADIO-3.22.26.17
Apr 20 2009, 15:30:43

wrong section dude
G1 Android Development
Good luck getting your 3g back though!
Try here
http://forum.xda-developers.com/forumdisplay.php?f=507

iMod_954 said:
I have a Rogers G1 that I use with AT&T's service. When I first received the phone (yesterday), AT&T's 3G service was working fine and it even had an option to enable|disable the 3G signal in the settings. However, after I decided to flash the SPL, radio, etc. (after everything, I've decided to stick with Cyanogen 4.2.14.1), my 3G signal no longer works, as I only have EDGE coverage AND there is no setting in the phone that even mentions HSDPA or 3G enabling. I know it's not the ROM that did this, since I was using the Expresso, MLIGN's 3.3 and another ROM. So basically.. How do I get my 3G signal back??? Thanks in advance!
My current G1 info:
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA21000)
CPLD-4
RADIO-3.22.26.17
Apr 20 2009, 15:30:43
Click to expand...
Click to collapse
isnt that the rogers radio ?
btw wrong section there is a questions and answers section for help. just so you know. Welcome to xda btw..
now on with other member flames.

Not sure how to help you. Wrong forum by the way. I used my Rogers Dream for AT&T 3G but I have noticed several things about it.
1. The build quality seems much lower than my ADP1. I put my ADP1 that I got in Dec. '08 thru hell and it is battered but not a single thing is wrong with it function wise. My Rogers Dream I had for 4 months and it already bit the dust. I took care of it like a baby, yet the bluetooth has failed, as has the microsd slot. I took it apart and swapped the sd board into my ADP1 and it worked fine, yet it fails in my Rogers one still yet. Damn you Rogers.
2. It always seems to show a low signal strength (~-100 dBm where my ADP1 gets ~-80 on EDGE and my Samsung flip-phone gets ~-75 on 3G all in one area)
I would recommend you try a reflash.

Geniusdog254 said:
Not sure how to help you. Wrong forum by the way. I used my Rogers Dream for AT&T 3G but I have noticed several things about it.
1. The build quality seems much lower than my ADP1. I put my ADP1 that I got in Dec. '08 thru hell and it is battered but not a single thing is wrong with it function wise. My Rogers Dream I had for 4 months and it already bit the dust. I took care of it like a baby, yet the bluetooth has failed, as has the microsd slot. I took it apart and swapped the sd board into my ADP1 and it worked fine, yet it fails in my Rogers one still yet. Damn you Rogers.
2. It always seems to show a low signal strength (~-100 dBm where my ADP1 gets ~-80 on EDGE and my Samsung flip-phone gets ~-75 on 3G all in one area)
I would recommend you try a reflash.
Click to expand...
Click to collapse
Yes, everyone keeps telling me the wrong forum. When I posted another question on another forum, NO ONE answered at all. Here, I get answers in 3 mins. However, I didn't mean to post it here (I will re-post this thread in the proper section). Thanks for your info! Except, I don't understand what you mean by re-flash.

iMod_954 said:
Yes, everyone keeps telling me the wrong forum. When I posted another question on another forum, NO ONE answered at all. Here, I get answers in 3 mins. However, I didn't mean to post it here (I will re-post this thread in the proper section). Thanks for your info! Except, I don't understand what you mean by re-flash.
Click to expand...
Click to collapse
I feel your pain on that one. It happens but you'll get an answer, hopefully.

iMod_954 said:
Yes, everyone keeps telling me the wrong forum. When I posted another question on another forum, NO ONE answered at all. Here, I get answers in 3 mins. However, I didn't mean to post it here (I will re-post this thread in the proper section). Thanks for your info! Except, I don't understand what you mean by re-flash.
Click to expand...
Click to collapse
I wasn't trying to be hateful or snarky. I was just stating that it was, unlike some people who just post "wrong forum jackass" & crap like that I actually tried to contribute something
And by reflash, I mean to try to reinstall another ROM. It could just be a temporary problem that reinstalling Cyanogen's ROM or any other ROM may fix.

Geniusdog254 said:
I wasn't trying to be hateful or snarky. I was just stating that it was, unlike some people who just post "wrong forum jackass" & crap like that I actually tried to contribute something
And by reflash, I mean to try to reinstall another ROM. It could just be a temporary problem that reinstalling Cyanogen's ROM or any other ROM may fix.
Click to expand...
Click to collapse
Oh.. I know you weren't being "hateful or snarky". I was just saying what everyone else has told me. I hope I didn't come off as "hateful or snarky" either.
If that's what re-flashing is then I've done that plenty of times. Most of the time, I would wipe everything (except the last two settings - Battery & Rotation). I've flashed MLIGN's v3.3, Espresso ROM, some other random v2.3 ROM by the same creator as the Espresso and now, CM's latest (which is what I'm at now - Most stable and it's the most smoothest ROM I've used so far).

its a network issue i doubt anyone here could help at all

Heres your problem..
A g1 WILL NEVER fuction on ATT 3g. They use different bands that the G1 does not use. No matter what you think you may have had, you NEVER had att 3g coverage with a G1. It is an ATT problem, not a rom, radio or whatever problem. Once you unlock a G1 for ATT you say by by to 3g.
Dont belive me, use google and do a tiny ity bity search.

crypysmoker said:
Heres your problem..
A g1 WILL NEVER fuction on ATT 3g. They use different bands that the G1 does not use. No matter what you think you may have had, you NEVER had att 3g coverage with a G1. It is an ATT problem, not a rom, radio or whatever problem. Once you unlock a G1 for ATT you say by by to 3g.
Dont belive me, use google and do a tiny ity bity search.
Click to expand...
Click to collapse
He has a Rogers one, so he is able to get AT&T 4G.

maxisma said:
He has a Rogers one, so he is able to get AT&T 4G.
Click to expand...
Click to collapse
Ahhh.. See I didnt know there was a difference. I guess its just us US'ers that get screwed on that.
But ATT 3g is garbage anyway lol

crypysmoker said:
Ahhh.. See I didnt know there was a difference. I guess its just us US'ers that get screwed on that.
But ATT 3g is garbage anyway lol
Click to expand...
Click to collapse
Actually it's not that bad lol. I live in the boonies about 60 mi. south of St. Louis & I have excellent 3G. I average about 120KB/s and on a good day I can cruise at 210KB/s. Not excellent, but when at my house my only other option is Hughesnet or Dial-up it's pretty dang good. Vzw has no service here & T-Mo barely has EDGE. Sprint is the only other 3G network here and I get about 60KB/s average on my EvDo card.

crypysmoker said:
Ahhh.. See I didnt know there was a difference. I guess its just us US'ers that get screwed on that.
But ATT 3g is garbage anyway lol
Click to expand...
Click to collapse
I REALLY hate when people try and give me info that they know NOTHING about. How are YOU going to tell ME if I had AT&T 3G or not? Don't you think I'd realize that!? Why else would I import a Rogers G1!? AT&T's 3G has a much wider spectrum than T-Mobile's, by the way.

iMod_954 said:
I REALLY hate when people try and give me info that they know NOTHING about. How are YOU going to tell ME if I had AT&T 3G or not? Don't you think I'd realize that!? Why else would I import a Rogers G1!? AT&T's 3G has a much wider spectrum than T-Mobile's, by the way.
Click to expand...
Click to collapse
oh how I am so tired of you rude little twerps. I made a mistake and I am sorry which I already siad. I was under the impresstion that ATT 3g DID NOT work on G1's I had no idea of the difference in builds.
Dont go giving me a high and mighty BS attitude because I made a mistake. Funny how Im the one who doesnt know what hes talking about, and your the one asking for help.
And as for Tmobiles coverage.. I live in florida.. I stay in florida.. I dont travel. My 3g and sometimes H depedning on what part of town im in averages 800kbps and has gone up to 7mb many times.
So again, Im sorry for making a mistake and apologizing fo rit and Im sorry you prefer ATT.

iMod_954 said:
I REALLY hate when people try and give me info that they know NOTHING about. How are YOU going to tell ME if I had AT&T 3G or not? Don't you think I'd realize that!? Why else would I import a Rogers G1!? AT&T's 3G has a much wider spectrum than T-Mobile's, by the way.
Click to expand...
Click to collapse
This should be order for US: Fastest - Slowest
-Verizon
-Sprint
-Tmobile
-A&TT
The top mobile carriers so I excluded any other ones.
I always got slow 3G on my old att phone but tmobile's is faster with great coverage for me and unfortunately bad for you.Not sure what desert wasteland your at that you cant get 3G(jk)...If you dial *#*#4636#*#* then select WCDMA only it should give you only 3G. Not sure if the feature is compat with Att too.

crypysmoker said:
oh how I am so tired of you rude little twerps. I made a mistake and I am sorry which I already siad. I was under the impresstion that ATT 3g DID NOT work on G1's I had no idea of the difference in builds.
Dont go giving me a high and mighty BS attitude because I made a mistake.
Click to expand...
Click to collapse
Granted you admitted inaccuracy with your assumption (and at no point apologized, for those keeping track), but with the tone you took in your initial post regarding his issue, I think he has the right to lash out a little.
You can tell him to do itty bitty searches all you want but your input's no good if you don't read first.
Sigh. Back to lurking I go.

crypysmoker said:
Heres your problem..
A g1 WILL NEVER fuction on ATT 3g. They use different bands that the G1 does not use. No matter what you think you may have had, you NEVER had att 3g coverage with a G1. It is an ATT problem, not a rom, radio or whatever problem. Once you unlock a G1 for ATT you say by by to 3g.
Dont belive me, use google and do a tiny ity bity search.
Click to expand...
Click to collapse
everyone knows this, I also have a UNLOCKED MyTouch, actually i've had a few unlocked T-mobile phones over the years. All you get EDGE never 3G i dont think it possible to ever get 3G, unless u know how to tweak the freq. and the radio crystal or whatever, and nobody can do that

nicknowsky said:
everyone knows this, I also have a UNLOCKED MyTouch, actually i've had a few unlocked T-mobile phones over the years. All you get EDGE never 3G i dont think it possible to ever get 3G, unless u know how to tweak the freq. and the radio crystal or whatever, and nobody can do that
Click to expand...
Click to collapse
Did you read ANYTHING on the second page???? How many times have we explained, he has a ROGERS DREAM. I have one too, THEY GET AT&T 3G, I PROMISE YOU! It's people like this that piss me off.

Geniusdog254 said:
Did you read ANYTHING on the second page???? How many times have we explained, he has a ROGERS DREAM. I have one too, THEY GET AT&T 3G, I PROMISE YOU! It's people like this that piss me off.
Click to expand...
Click to collapse
yeah, I import at&t phones for use on rogers network, because they share freq's, rogers = at&t

T-Mobile/AT&T with Aussie NON-HLOS on JB Verizon XT907 confirmed

I still do not know how to get FastBoot_SU working on my XT907 so these things are just experimental.
Verizon XT907 Razr M US with US T-Mobile using NON-HLOS.bin from AUSSIE ICS
I know Edge and Voice is working with my Sim.
No idea how to get FastBoot_SU working so i did this a bit different.
You will need:
VZW_XT907_4.1.1-9.8.1Q-27-2-4_1FF.xml (http://forum.xda-developers.com/showthread.php?t=2017200)
RSDLite6.1.4_FLASH
MotorolaDeviceManager_2.3.4 DRIVERS
NON-HLOS.bin from AUSSIE Razr M it is 102.400KB compared to the US 49.xxxKB (http://dl.dropbox.com/u/8648738/NON-HLOS.bin)
WinRar or any Zip Program
1. Navigate inside VZW_XT907_4.1.1-9.8.1Q-27-2-4_1FF.xml using winrar or winzip and find the original NON-HLOS.Bin over write this with the Aussie Radio 100kb one. Make sure its packed normal again.
2. Use RSDLite, make sure Phone is in Debug mode, flash the new VZW_XT907_4.1.1-9.8.1Q-27-2-4_1FF.xml with the modified Radio.
3. Let the update do its thing, once done insert SIM and enjoy GSM reception.
4. Find a way to gain root access ahhahahaha bc this should wiped ur root access.
There is a way to use FastBoot_SU somehow but it does not work me ...
This is the same modification done to ICS to get it to work with US carriers, except you are on JB or in this case i used JB to flash the entire device.
Some one feel free to clean up these steps or improve this for easy use of tutorial ? You are welcome to edit LOL

followed the steps. but it seems the radio is problematic, because att signal is vey vey weak. I couldnot place call.the same micro sim had 4 bar at my hd2 win phone.
any fix?
Sent from my XT907 using Tapatalk 2

Just tried flashing following your instructions and got stuck.
RSD Lite v5.6 Multi-Flash reports:
Failed flashing process. 16/19 flash "cdrom" -> Phone returned FAIL.; phone connected
Please help!!! Phone now stuck in Fastboot Flash Mode...
Thank you

I did not use 5.6
Also make sure ur battery is above 50% I did have issues flashing when my phone was at about 30-40 ish %
It will show up as low battery.
Get the Stock Verizon JB reflash it with 6.X and up.
Then use a clean version of JB with a modded PJcon Aussie Radio.
And reflash it from there.
To get out of there just Reboot by holding all buttons Power and Volume until reboot.

Thank you!
It only works with version 6 and above.
All is good now.
BTW I just traveled through the documented refarmed areas in Chicago and Cleveland and still no 3g.

yeah same here.
We still figuring out how to get 3G or 4G

Just to add some "fuel to the fire"...a year or so ago I got bored with my Defy and got an Atrix 4G online from the US (I live in Australia). It was AT&T branded and locked so had to purchase an unlock code. When I got it going on Telstra, the reception was just never that good. People always complained they couldn't hear me and I had similar experiences with hearing them. I even gave it to my bro on the other side of the country and he had the same issues.
I suppose what I'm putting forward is that even if it is 2100mhz band or 850mhz band which the Aussie radio does (I don't know what AT&T/T-Mobile run on), it's possibly more than that? I recall reading a VERY interesting article about how much work carriers do to get phones to work on their selected band - no disrespect to any Devs intended, this is just my thoughts as this may be a ghost we're chasing?
Or is the Electrify M XT905 going to work any better?

Works perfectly fine in Germany though Germany uses Stock Rom for XT907
I am getting Super strong signal everywhere better than my iPhone 4, I am using Aussie radio.
I even get better signal than the AT&T users. So it maybe the area, AT&T been getting worse bc they share some towers with T-mobile now.
By that the same tower rent space T-mobile is allowed to put up their Antenna gear, which sometimes decreases signal strength of AT&T.
Which happened alot in my area, alot of AT&T users loosing more signal... and running a modded phone is probably isn't helping the matter.
But T-Mobile seems to have few more frequencies after the refarm ? Maybe that's why ?

The XT907 Definitively is able to get H+ on GSM with Stock Rom in Europe.
H+ we managed to get it to 2.xMB but her normal area we only get 1.5-1.9MB ish
She also picks up E and 3G here and there.
This is on O2 Germany (DE) in Munich Testing to Frankfurt.
Using Stock Verizon Firmware un-modified stock radio.
I will test Aussie Radio next week in Germany see what happens.
But right now She is enjoying H+ with GSM on a XT907.

Hi guys,
I've read the threads in Q/A and this one about different sim cards in RAZR M, and I must say I'm pretty sad because it doesn't work.
I like this phone very much. It's the best phone I've ever seen. But I won't buy it because I don't have money to pay for expensive plans to Verizon (nor I will be in the US for 2 years which is the minimum contract time), and it doesn't work on T mobile which I would like to use. I guess I will have to stay on my Defy and wait for some new unlocked version of Motorola (never gonna happen imo).
Or should I buy it and try this method so I can use it partially with T mobile? Please advise.
Sent from my MB525 using xda app-developers app

I am using it with this method with T-Mobile.
Though when i am in Germany I have to take the mod out to get onto 3G in Germany.
With US-T-mobile we only managed to get Edge Connectivity so far.
I like it because i dont use much data and edge is enough for geting GPS to work smooth and surfing is slooow.
Else all is well =)

Thanks for the info~~~!!

It'd be really cool if the dropbox link worked. Unless im doing something wrong. Unless i can pull it out of another stock/rom file

Great info. Is the dropbox link down for good? I cant seem to find any mirrors :-/

This method has been made obsolete by the discovery of a much simpler procedure that edits a single bit in the radio NVM that enables full service on US carriers.
I wrote up the updated method in the Q&A section.
http://forum.xda-developers.com/showthread.php?t=2166542

Can someone please reupload AUSSIE RADIO as Radiocomm method is not working for me!

Proda said:
Hi guys,
I've read the threads in Q/A and this one about different sim cards in RAZR M, and I must say I'm pretty sad because it doesn't work.
I like this phone very much. It's the best phone I've ever seen. But I won't buy it because I don't have money to pay for expensive plans to Verizon (nor I will be in the US for 2 years which is the minimum contract time), and it doesn't work on T mobile which I would like to use. I guess I will have to stay on my Defy and wait for some new unlocked version of Motorola (never gonna happen imo).
Or should I buy it and try this method so I can use it partially with T mobile? Please advise.
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
May I suggest buying the RAZR i

Germanese said:
I still do not know how to get FastBoot_SU working on my XT907 so these things are just experimental.
Verizon XT907 Razr M US with US T-Mobile using NON-HLOS.bin from AUSSIE ICS
I know Edge and Voice is working with my Sim.
No idea how to get FastBoot_SU working so i did this a bit different.
You will need:
VZW_XT907_4.1.1-9.8.1Q-27-2-4_1FF.xml (http://forum.xda-developers.com/showthread.php?t=2017200)
RSDLite6.1.4_FLASH
MotorolaDeviceManager_2.3.4 DRIVERS
NON-HLOS.bin from AUSSIE Razr M it is 102.400KB compared to the US 49.xxxKB (http://dl.dropbox.com/u/8648738/NON-HLOS.bin)
WinRar or any Zip Program
1. Navigate inside VZW_XT907_4.1.1-9.8.1Q-27-2-4_1FF.xml using winrar or winzip and find the original NON-HLOS.Bin over write this with the Aussie Radio 100kb one. Make sure its packed normal again.
2. Use RSDLite, make sure Phone is in Debug mode, flash the new VZW_XT907_4.1.1-9.8.1Q-27-2-4_1FF.xml with the modified Radio.
3. Let the update do its thing, once done insert SIM and enjoy GSM reception.
4. Find a way to gain root access ahhahahaha bc this should wiped ur root access.
There is a way to use FastBoot_SU somehow but it does not work me ...
This is the same modification done to ICS to get it to work with US carriers, except you are on JB or in this case i used JB to flash the entire device.
Some one feel free to clean up these steps or improve this for easy use of tutorial ? You are welcome to edit LOL
Click to expand...
Click to collapse
is there a way to flash it in a RAZR-M with JB 4.1.2 ?

toroloco73 said:
is there a way to flash it in a RAZR-M with JB 4.1.2 ?
Click to expand...
Click to collapse
Yes it is.
Though I am not sure if it is possible on the 98.18.78.
Earlier ones will work.

Germanese said:
Yes it is.
Though I am not sure if it is possible on the 98.18.78.
Earlier ones will work.
Click to expand...
Click to collapse
now i'm on xt907_stock_deodex_98.16.3
i can't find NON-HLOS.bin from AUSSIE Razr M file

[Q] T-Mobile/General Data issues?

I was just wondering if its just me or our some of the devices having spoty data coverage
Me personally my data drops to H+ and H a lot my wife has a note 3 and runs solid LTE all day
But for the life of my I can't get a stable connection in our home... Any fix or work around?
Thanks in advance.
Also I have set it to LTE and changed the APN settings.

I'm having weird data issues after I upgraded to 5.1

klone96 said:
I'm having weird data issues after I upgraded to 5.1
Click to expand...
Click to collapse
I'm still running 5.0 so I would not know

Slow LTE on t-mobile
I've noticed since upgrading to 5.1 on t-mobile that my LTE speeds are horrible I'm getting 3-5mbps here in northern Virginia. I had been getting upwards of 15-20 mpbs I checked my apn settings and everything seems to be what it should be.. Anyone else having issues?

Defiant81 said:
I've noticed since upgrading to 5.1 on t-mobile that my LTE speeds are horrible I'm getting 3-5mbps here in northern Virginia. I had been getting upwards of 15-20 mpbs I checked my apn settings and everything seems to be what it should be.. Anyone else having issues?
Click to expand...
Click to collapse
Same here

klone96 said:
Same here
Click to expand...
Click to collapse
Well my speeds outside pick up but it keeps me on h+ inside. I'm using the 5.1 modem now
It seems a bit better but 1-2mbps if that. This is making me debate on going back to the note 4 but I love my titan

Frozt said:
Well my speeds outside pick up but it keeps me on h+ inside. I'm using the 5.1 modem now
It seems a bit better but 1-2mbps if that. This is making me debate on going back to the note 4 but I love my titan
Click to expand...
Click to collapse
Nevermind after further use the 5.1 modem sucks and I'm stuck with it.

I have the opposite experience. Much better Since the upgrade. As a whole though connectivity sucks.

people that are having issues with the 5.1 radio, just flash the previous radio.

simms22 said:
people that are having issues with the 5.1 radio, just flash the previous radio.
Click to expand...
Click to collapse
Do u have a link to it ?

klone96 said:
Do u have a link to it ?
Click to expand...
Click to collapse
There is a thread in the general section.
http://forum.xda-developers.com/showthread.php?t=2969380
Sent from my Nexus 6

from what I have read, you can flash the new 47E radio and LTE speeds will go back to where they were. Or flash the 5.0.1 radio.
I flashed back to 5.0.1 radio for now.

T-Mobile MRA58X build possibly did something to turn radio down a notch..

I just flashed this build to my N6 a couple a days ago and right off I noticed that while in my house I wasn't getting a good lte signal anymore. Now before I updated to this build I had good lte in my house almost full bars even in my basement I had at least 2 or 3 bars. Well needless to say I wasn't happy with that so I flashed back to what I was running before which was MRA58N and sometimes R . Well when I flashed back to these builds I noticed again that something wasn't right my signal seemed to have been broke! So I started flashing just radios to see if that would help but to no avail.. I even called T-Mobile and they said nothing was going on in my area and I should have good signal ,but in that same sentence he brought up the cellspot tower that they want everyone in low signal areas to use. Well to make a long story short I live in the city and before I flashed this latest T-Mobile build I had great service even in my house. The messed up thing is I can't fix my N6 now know matter what build I use my signal is no good in my house anymore. It's almost like they have put a patch of some sort to my phone and it modded my phone to not had goog lte service behind walls. My phone now jumps from 3g to h to the ! Mark even when it's in some spot! My battery sucks now because of the constant change. I'm getting a new n6 Monday and I hope it doesn't have this X build on it because I'm going to not flash and see if my signal stays the way it used to which was a good signal. If it has good signal I'm (and this is just my opinion) think there /T-Mobile is just trying to push this cellspot tower on as many as they can and help it along is turning down Rf in our phones so they don't work well indoors.. Just my opinion!

I want the MRA58X radio to see if I have the same problem. I have the MRA58M with the 27R radio and it runs good. I wanna see if the 30R radio gives me more band 12 because I live in a band 12 area but it switches back to band 4 with the quickness. Anybody have the 30R radio in zip forms? It'll be greatly appreciated.

scoonie said:
I want the MRA58X radio to see if I have the same problem. I have the MRA58M with the 27R radio and it runs good. I wanna see if the 30R radio gives me more band 12 because I live in a band 12 area but it switches back to band 4 with the quickness. Anybody have the 30R radio in zip forms? It'll be greatly appreciated.
Click to expand...
Click to collapse
Oh the MRA58X does have band 12. Im not flashing this X build when my new N 6 gets here! I'll stay far away from it! I'll stick with Google's official builds! MRA58N worked great for me on T-Mobile and WiFi calling and I had band 12 as well. When I flashed this X build everything went haywire... IMO!

Im on MRA58X just wanted to know why all these different numbers ? And why is the x bad?

samomamo said:
Im on MRA58X just wanted to know why all these different numbers ? And why is the x bad?
Click to expand...
Click to collapse
MRA58X screwed up my data/ signal it was jumping all over the place for me. It would literally go from band 12 to 2 then 4 the radio never had a chance to settle and was causing major battery drain. The messed up thing is for some reason I couldn't even revert back to other builds cause the radio stayed messed up no matter what build I was on or rom.. I truly think MRA58X messed my n6 up and T-Mobile thinks it may have as well that's why there sending me a new n6 by Monday..?
Oh I forgot this radio jumping all over the place happens anywhere I go even when Im not even moving..?

Flashing different radios don't help either... I'm truly think this build/X does something weird with the way the phone tracks signals and for me its a major problem

beachbum40 said:
MRA58X screwed up my data/ signal it was jumping all over the place for me. It would literally go from band 12 to 2 then 4 the radio never had a chance to settle and was causing mager battery drain. The messed up thing is for some reason I couldn't even revert back to other builds cause the radio stayed messed up no matter what build I was on or rom.. I truly think MRA58X messed my n6 up and T-Mobile thinks it may have as well that's why there sending me a new n6 by Monday..?
Click to expand...
Click to collapse
Interesting, i have moto x pure , nexus 5x amd yesterday got the nexus 6 from the Amazon deal, so before using the nexuses i was with the moto x and had no problems with it watching youtube videos or anything. Then 3 days ago i got the nexus 5x and put my tmobile sim in it and started using that and was noticing that the videos were stopping like i was feeling something is not right , then yesterday got the Nexus 6 and put the sim in this now im having the same issues i was on lollipop and was not offering me the marshmallow update, so i unlocked the bootloader and when the phone started it gave the 6.0 update . so now im on the MRA58X. And im thinking maybe the marshmallow has to do something with that? Because the moto x is on lolipop and its a beast. Sorry for the long write.

you guys do realize that you can use any nexus 6 radio on any version of android? well you can. if this radio is giving you issues, you are more than welcome to try any other radio that you like, until you find the one that works best for you. im on tmobile, am using the 27R radio, wifi calling works fine, and so does everything else.

simms22 said:
you guys do realize that you can use any nexus 6 radio on any version of android? well you can. if this radio is giving you issues, you are more than welcome to try any other radio that you like, until you find the one that works best for you. im on tmobile, am using the 27R radio, wifi calling works fine, and so does everything else.
Click to expand...
Click to collapse
I know but im thinking maybe its the T-Mobile giving problems with the signal not the phone itself? Or maybe the marshmallow is handling the radio differently then the lolipop?

samomamo said:
I know but im thinking maybe its the T-Mobile giving problems with the signal not the phone itself? Or maybe the marshmallow is handling the radio differently then the lolipop?
Click to expand...
Click to collapse
im using marshmallow on tmobile, in nyc, and no problems here. try a different radio, or a few, if the problems still persist then its probably a local tmobile issue. as i said before, im using the 27R radio.

simms22 said:
im using marshmallow on tmobile, in nyc, and no problems here. try a different radio, or a few, if the problems still persist then its probably a local tmobile issue. as i said before, im using the 27R radio.
Click to expand...
Click to collapse
I've tried every radio out there. Before MRA58X this would solve the problem but since I flashed the X build it seems every radio now that I try has same issue. It's like the new X build did some kind of software change and now I'm stuck with every single radio I use jumping all over the place. Before X I didn't have this issue..

I did call T-Mobile and they said there is no problems with the network in my area. They are sending me a new phone and I'm not flashing X period..?

beachbum40 said:
I've tried every radio out there. Before MRA58X this would solve the problem but since I flashed the X build it seems every radio now that I try has same issue. It's like the new X build did some kind of software change and now I'm stuck with every single radio I use jumping all over the place. Before X I didn't have this issue..
Click to expand...
Click to collapse
well, it could be not the radio thats the issue as well. tmo delayed marshmallows release because they found a bug, then waited for a rom update. the rom update might be the issue. no, im not on that last tmo build, but all the builds work on tmo, and all of tmos features too. maybe you should try a different marshmallow build?

simms22 said:
well, it could be not the radio thats the issue as well. tmo delayed marshmallows release because they found a bug, then waited for a rom update. the rom update might be the issue. no, im not on that last tmo build, but all the builds work on tmo, and all of tmos features too. maybe you should try a different marshmallow build?
Click to expand...
Click to collapse
I did go back to NRA58K then N then even R. But after I flashed the X build it screwed up something where now even on those older builds its screwed up my data. before I flash X I was using MRA58k N and r with no issues. But since I flashed X now on any build its screwed up . Hope that makes sense..?

I'd put up a logcat but I run purely stock anymore because of PAY which I have to have?when I get my new n6 I'm not going to flash MRA58X and I'll see how things work. If all is well then it was the X build or maybe just something in my phone broke. I guess I'll find out Monday..

I've been on stock x for about 4 days. I'm seeing none of these issues and I still have great battery life. Phone has been perfect. I took the ota though. I did not flash x
Sent from my Nexus 6 using XDA Free mobile app

I am having the exact same issue on my Nexus 6 after taking the MRA58X update. My phone never used to associate with anything besides LTE or HSPA. After updating my phone would switch between all different network modes, even those that I have never seen in my area before the update. The problem is especially bad when roaming around, but having the phone stationary can also exhibit this behavior. The sequence of events is similar to the following: LTE, HSPA, GPRS, EDGE, UMTS (3G), GPRS, EDGE, LTE for a couple seconds, GPRS, HSPA, GPRS... The network is so unstable on the 2G based networks which made using the Internet very difficult. Reverting the radio to the previous version does not fix the issue as reported by a previous user, and it seems like that the update has made some changes in a way to at affects how the radio associates with neighboring towers permanently. I would advise against taking this update if you are using T-Mobile and your device is out of warranty, as T-Mobile will most likely not cover the "damage" even though it may be OTA related. It does however seem that using the *#*#4636#*#* code and forcing the phone into LTE mode makes the mad network switching go away, although now the phone can't grab onto HSPA in LTE coverage holes and call issues in non VoLTE areas. My standby battery life also seems to be significantly reduced by all of this network searching in the background.
You have been warned...

I took the X Ota and the phone is working flawless for me. Sorry you guys are having issues
Sent from my Nexus 6 using Tapatalk

Clean flash back to lollipop and see if that changes anything.
If it doesn't, it isn't the phone/rom.
BTW I recently got the X update and so far so good but to be fair I'm on wifi alot.
(but LTE does work as before)
...and it there are indeed weird tower issues, a rep won't tell you specifics.

I'm on MRA58N with TMO in the Metro Chicago area, WiFi calling, VoLTE, and HD calling all work fine, but it seems as though my N6 is just stuck on band 4. I've never ever seen this device surf on band 12 (and I run the LTE Discovery app).

SM-N920i, Australia, 4 bars reception but no mobile data

Picked up a cheap Note 5 through Ebay with a broken back, I like fixing things but this one has me stumped!
I get full reception bars but no mobile data, it will sometimes switch between H or H+ but nothing comes down then just goes back to blank.
- This is in a good 4 G area
- APN is always set as per provider
- Tried 2 different sims but only from one company, Optus Australia
- I have tried 3 official ROMS applied through ODIN
- When replacing the back I stripped the phone back to the screen and checked all cables while reassembling, I didn't notice anything odd.
- KNOX is at 0
- IMEI is not locked
Is there anything I have missed?
Antennas are around the edges right? Not in the actual backing of the phone as I haven't replaced it yet.

pox67 said:
Picked up a cheap Note 5 through Ebay with a broken back, I like fixing things but this one has me stumped!
Is there anything I have missed?
Antennas are around the edges right? Not in the actual backing of the phone as I haven't replaced it yet.
Click to expand...
Click to collapse
What kind of information do you get when you dial *#0011# ?
You should have something like this.

CodeNameRedNeck said:
What kind of information do you get when you dial *#0011# ?
You should have something like this.
Click to expand...
Click to collapse
Good idea!
Broken Note 5:
https://goo.gl/photos/nPvbBSW572oGRSuT8
Working tablet with similar SIM card:
https://goo.gl/photos/XAPLQLpiZuLqXbWg8

pox67 said:
Picked up a cheap Note 5 through Ebay with a broken back, I like fixing things but this one has me stumped!
I get full reception bars but no mobile data, it will sometimes switch between H or H+ but nothing comes down then just goes back to blank.
- This is in a good 4 G area
- APN is always set as per provider
- Tried 2 different sims but only from one company, Optus Australia
- I have tried 3 official ROMS applied through ODIN
- When replacing the back I stripped the phone back to the screen and checked all cables while reassembling, I didn't notice anything odd.
- KNOX is at 0
- IMEI is not locked
Is there anything I have missed?
Antennas are around the edges right? Not in the actual backing of the phone as I haven't replaced it yet.
Click to expand...
Click to collapse
pox67 said:
Good idea!
Broken Note 5:
https://goo.gl/photos/nPvbBSW572oGRSuT8
Working tablet with similar SIM card:
https://goo.gl/photos/XAPLQLpiZuLqXbWg8
Click to expand...
Click to collapse
I also wonder if it is locked to a different region. I have never seen a phone that is region locked but I would imagine you would get an error message of some sort so my best guess is that the antenna is messed up.

Yes, also wondering about Sim slot, could that be the issue?
I'll take it apart again for another look.

Ok, now I am thinking some one has flashed the wrong radio as it is mentioning wcdma which Australia doesn't have anymore.
Can I flash a specific radio or maybe this is a version from another country with Australian firmware forced on it?

pox67 said:
Ok, now I am thinking some one has flashed the wrong radio as it is mentioning wcdma which Australia doesn't have anymore.
Can I flash a specific radio or maybe this is a version from another country with Australian firmware forced on it?
Click to expand...
Click to collapse
WCDMA is what GSM carriers use for 3G. You can mix and match different parts of firmware on Samsung phones. I used to do it on my Note4 to get 4G speeds on my 3G only phone. I would use one version for the main OS to include the choice for LTE and the modem from firmware for my version to make the modem work. I doubt that is what is going on with your phone since you have flashed firmware on it which would overwrite any previous firmware even if it was a mix and match. I looked again at the picture you have for your tablet. I am not that familiar with tablets so I have to ask. Is that SIM GSM or CDMA?

Thanks for the assistance, I don't have time to troubleshoot any longer so will sell it on. Nice phone though and I considered keeping it as a mini wireless tablet.

pox67 said:
Thanks for the assistance, I don't have time to troubleshoot any longer so will sell it on. Nice phone though and I considered keeping it as a mini wireless tablet.
Click to expand...
Click to collapse
its a shame too i love this device im sure uve done checked but have u made sure that ure carriers data bands support ure note 5 .
and checked apn settings
also make sure radio is set to 2g/3g/lte
---------- Post added at 08:12 AM ---------- Previous post was at 08:07 AM ----------
pox67 said:
Picked up a cheap Note 5 through Ebay with a broken back, I like fixing things but this one has me stumped!
I get full reception bars but no mobile data, it will sometimes switch between H or H+ but nothing comes down then just goes back to blank.
- This is in a good 4 G area
- APN is always set as per provider
- Tried 2 different sims but only from one company, Optus Australia
- I have tried 3 official ROMS applied through ODIN
- When replacing the back I stripped the phone back to the screen and checked all cables while reassembling, I didn't notice anything odd.
- KNOX is at 0
- IMEI is not locked
Is there anything I have missed?
Antennas are around the edges right? Not in the actual backing of the phone as I haven't replaced it yet.
Click to expand...
Click to collapse
on sprint tmobile and verzion models there are 2 wires that go from mother board to lower board that houses the usb
if u have it taken apart and looking there is a lower left anten plug in and a higher one on the rite.
the lower left one is for the cell radios and the higher one is for the wifi i had mine crossed on the usb board side and had the best wifif sig ever but absolutly no cell sig

I have had it totally apart, swapped the antenna wires and also the screen frame in case something was not connecting there. I think maybe the 3g/4g chip is toasted or something. Flashed a few stock ROMS but no good.