Database Develop

[RECOVERY] [UNOFFICIAL] TWRP_3.0_m86_patched_st0rm77

** BRICK WARNING/Disclaimer/Requirements **
>> Only flash with unlocked bootloader <<
>> Scripts are released under GPlv2 license <<
>> Run at own risk <<
Hi,
I patched the TWRP 3.0 recovery from faust93 to include important partitions
that make switching between different versions of Android/Ubuntu very simple.
All partitions are properly added to the fstab, but out of fear that some of
you will brick your device i disabled most of them.
Next version will contain a backup of all unique partitions, but i will have
to test this thoroughly.
Steps to install:
1. Download the zip file from attachments below
2. Unpack the zip file
3. Check checksum with md5sum -c *.md5
4. Put phone into fastboot mode (boot device with [vol-] and [power] button)
5. Flash recovery with:
# fastboot flash recovery TWRP_3.0_m86_patched_st0rm77.img
# fastboot reboot
then boot the device with [vol+] and [power] button, to enter recovery
[Requested by @p82maarj]
Already on an older TWRP version ?
- Flash "update_TWRP_3.0_m86_patched_st0rm77.zip" from TWRP
or
- Unpack the zip and flash the recovery manually in TWRP by selecting "install image"
Enjoy
Warning:
** If you flash an official update.zip from Flyme, remove bootloader, ldfw & recovery from ZIP**
** Otherwise you'll find yourself with a locked bootloader **

Hi @st0rm77
Thanks for your contrubution!
It will be good if you create a flashable zip of your new recovery. It can be flashed directly from the stock recovery or from the other twrp recovery without entering in fastboot.
Furthermore to have a flashable zip is usefull to flash a new rom update. For updating the new rom version I enter in TWRP, flash rom zip, flash unlocked bootloader zip and flash TWRP zip.
I attach the other flashable TWRP zip you can based on (only replace recovery.img by your recovery.img).

Hi @p82maarj,
Thanks, as per your request, i added an update_TWRP_3.0_m86_patched_st0rm77.zip . This is directly flashable from an older TWRP.
I added some extra verification so people dont end up with a corrupt recovery.
Enjoy
(in order not to confuse people to much, can you remove your download)

Personally I like android as OS, I don't wish to try Ubuntu, in my case it's useful to update my "old" TWRP by Faust93 with this one ?

PYCON said:
Personally I like android as OS, I don't wish to try Ubuntu, in my case it's useful to update my "old" TWRP by Faust93 with this one ?
Click to expand...
Click to collapse
Yeah, you get some extra abilities:
- Backup of Boot Logo
- Backup of Device Tree
Now you can backup/restore in TWRP without manually flashing dtb (device tree) in order to switch between Flyme, AICP, ResurrectionRemix or Ubuntu.

Thanks for everything you've been releasing, great work!

st0rm77 said:
Hi @p82maarj,
Thanks, as per your request, i added an update_TWRP_3.0_m86_patched_st0rm77.zip . This is directly flashable from an older TWRP.
I added some extra verification so people dont end up with a corrupt recovery.
Enjoy
(in order not to confuse people to much, can you remove your download)
Click to expand...
Click to collapse
Done Thanks!

st0rm77 said:
** If you flash an official update.zip from Flyme, remove bootloader, ldfw & recovery from ZIP**
** Otherwise you'll find yourself with a locked bootloader **
Click to expand...
Click to collapse
Sorry for the stupid question but it's just to be sure. I should remove the file named "bootloader" or the one named "boot.img"? Or both of them?
Thank you very much!

Another little question... What's the difference from 2 ZIP files ? Older one and updated ZIP ?

PYCON said:
Another little question... What's the difference from 2 ZIP files ? Older one and updated ZIP ?
Click to expand...
Click to collapse
I know the answer to this one!
The first zip contains the img file that you can flash using fastboot.
The second (update) zip is the one you need if you already have (an older) TWRP and you wish to update to this version (use it from inside TWRP).

abePdIta said:
Sorry for the stupid question but it's just to be sure. I should remove the file named "bootloader" or the one named "boot.img"? Or both of them?
Thank you very much!
Click to expand...
Click to collapse
boot.img is your boot partition, you need this one :good: (NEEDED)
bootloader is the locked bootloader from meizu, avoid this one as the plague (AVOID)
Dont brick your device, check everything carefully :fingers-crossed:

st0rm77 said:
Dont brick your device, check everything carefully :fingers-crossed:
Click to expand...
Click to collapse
Thank you very much! I will be careful in the future, I promise!

i follow the a to I tutorial
then unlock bootloader
then this
now when i conect meizu to pc i try to pass custom rom to internal memory and the phone restart
what is the problem
---------- Post added at 10:35 PM ---------- Previous post was at 09:56 PM ----------
managed to download the rom in phone browser now i have RR and all it´s ok

I flash stock recovery ( use update 5.1.10.0g) but not success, híc híc, help me restore stock recovery, many thanks!!!!

st0rm77 said:
Now you can backup/restore in TWRP without manually flashing dtb (device tree) in order to switch between Flyme, AICP, ResurrectionRemix or Ubuntu.
Click to expand...
Click to collapse
Just to be sure I understood :
Going from Flyme to CM :
-Backup Flyme (system+data+dtd)
-Flash CM archive
Going back to Flyme
-(optional) Backup CM (system+data+dtd)
-Restore Flyme (system+data+dtd)
Is there is a quikier way ?

TWRP 3.1.0.0 is out... It's possible to port it for our PRO5 ?! :silly:

help
hi .i change meizu pro 5 from china to national (5.6.1.19 daily )and unlock it and flash recover TWRP 3.0 but not login it the recovery .
i want updated

PYCON said:
TWRP 3.1.0.0 is out... It's possible to port it for our PRO5 ?! :silly:
Click to expand...
Click to collapse
I too vote for a port!

3.1.1 was released

munky-head said:
3.1.1 was released
Click to expand...
Click to collapse
Not for PRO5

[ROOT] emui 5.0 [p9lite] L31C636B390 only

Just recommend L31C636 bootloader unlock
Go twrp recovery install n flash
access Root with https://play.google.com/store/apps/details?id=me.phh.superuser
Link flashible zip with twrp method
https://mega.nz/#!xOpXQbyJ!CWBv7zBDBYn3HU-NQ22V1hnbmGG9Z5YZl-5fxt8eMi8
Unroot using stock boot emmc/kernel
Flashible zip with twrp method
https://mega.nz/#!FPQWXD7T!fuwBOtGbId5C_RVx4xdzOcc-MytTwbN9f9jUfzuLXfk
--------------------------------------------------------------------
**** SPECIAL TOOLS L31C636B390 RUN batch
Link= https://drive.google.com/file/d/0B_FSYpFoKjW5TnRTS3ZzODhrak0/view?usp=drivesdk
* Add unlock bootloader
* Add recovery stock from UPDATE.APP
* Add stock boot.img from UPDATE.APP
* Add root, run batch file
* Add twrp
--------------------------------------------------------------------
GUIDE unlock bootloader..
***Before: go about phone,,press the build number multiple times n then developers options, enable oem unlock.
** Website unlocking password generator> https://emui.huawei.com/en/plugin/unlock/index
** Done: downloading tools? Extract to..
Just open batch file unlock bootloader
N then open install root..Done
--------------------------------------------------------------------
WARNING: if you do not know what it means and its purpose!!!
after device bootloader unlocked?
ur device running stock EMUI?
Recommend cannot factory reset
with setting>advanced setting>backup n reset..
N cannot factory reset with twrp,,if not flashing custom room
-------------------------------------------------------------------
TANKS superuser
 @phhusson
TANKS twrp
 @OldDroid
Information:
Boot modded
Status: stable

Sorry to interrupt but is this thread really needed? There are multiple guides how to root this phone, also with a lot more info.

dariomrk said:
Sorry to interrupt but is this thread really needed? There are multiple guides how to root this phone, also with a lot more info.
Click to expand...
Click to collapse
Ok tomorrow updated again
Add tools n for guide

syaif fabian said:
Ok tomorrow updated again
Add tools n for guide
Click to expand...
Click to collapse
Also, a guide should be in a different subforum, just saying.

Unroot using stock boot emmc/kernel
Flashible zip with twrp method
https://mega.nz/#!FPQWXD7T!fuwBOtGbId5C_RVx4xdzOcc-MytTwbN9f9jUfzuLXfk
--------------------------------------------------------------------

Install TWRP 3.1.1.0 FIR REDMI 4X(SANTONI) WITHOUT ANY PASSWORD OR OTHER PROBLEM

HERE is the twrp3.1.1 fully working guied...
make sure you backup all your data...
and read all steps care fully...
1.You must have unlocked bootloader!
2.Download ADB Drivers from here.
3.Download TWRP for your Android version:
Android 6: TWRP_3.1.1-0 link - https://xiaomifirmware.com/download-link/?dlm-dp-dl=4535
Android 7: TWRP_3.1.1-0 link - https://xiaomifirmware.com/download-link/?dlm-dp-dl=4537
4.Reboot into fastboot mode by pressing “Volume Down” and “Power” buttons at the same time.
5.Connect your phone to PC via USB cable.
6.Start the “Flash-Redmi 4x TWRP.bat” file from unpacked TWRP archive.
7.conform installation by pressing “Enter” button on your keyboard.
8.in the end your device will automatically boot into custom recovery mode..
9. IMPORTANTay attention that if you’re installing TWRP without flashing new ROM, go to “Advanced” > “Tools” and disable boot partition encryption, otherwise official ROM won’t start.
copy the link and paste in your browser if click don't work
ENJOY..... LIKE THE POST IF ITS HELPFULL
#Juz_Share
XDA:DevDB Information
TWRP V3.1.1.0 MOD FOR SANTONI, Tool/Utility for the Xiaomi Redmi 4X
Contributors
gunsheriff
Version Information
Status: Beta
Created 2017-10-28
Last Updated 2017-10-28

I have updated this img file over official twrp recovery. Now i am ok with it. Go flash buddies..

gunsheriff said:
I have updated this img file over official twrp recovery. Now i am ok with it. Go flash buddies..
Click to expand...
Click to collapse
Hi, in fastboot says: "waiting for device"... any help? thanks

Docargenis said:
Hi, in fastboot says: "waiting for device"... any help? thanks
Click to expand...
Click to collapse
Just install proper adb driver to you computer than try this...

gunsheriff said:
Just install proper adb driver to you computer than try this...
Click to expand...
Click to collapse
Thanks, I did it in another pc and works great! :good:

Thread closed.
Copy pasted from here:
https://xiaomifirmware.com/guides-and-tips/download-install-twrp-3-1-1-0-redmi-4x/
Do not steal someone else's work and call it your own.

[Jan 7]Angler-opm3.171019.013 [ Radio ,Bootloader , Vendor ] from the factory image

Hi everyone ,
Here you can find the latest Vendor , Bootloader and Radio from the factory image [angler-opm3.171019.013-factory-3204625a] for January 2018 , to help who looking for it :
The folder contain these 3 files , you can flash it from the fastboot or twrp
http://www.mediafire.com/folder/gqg44lpn36eam/angler-opm3.171019.013

I'm pretty sure the bootloader and radio need to be made into a flashable zip to be able to be flashed from TWRP.
Sent from my Pixel 2 XL using Tapatalk

BL & radio (.img) not advisable to flash via twrp, only Vendor

hartleyshc said:
I'm pretty sure the bootloader and radio need to be made into a flashable zip to be able to be flashed from TWRP.
Click to expand...
Click to collapse
xtc_24 said:
BL & radio (.img) not advisable to flash via twrp, only Vendor
Click to expand...
Click to collapse
Yes , flash only vendor via twrp .
Radio and bootloader flash it from fastboot command line , you can find many threads talk about how flash it ?

AOSP Android 11.0 for XZ1C (G8441)

Hello.
I've managed to build AOSP Android 11.0 for Sony Xperia XZ1 Compact (G8441) following the guide:
Sony Open Devices - Build AOSP Android 11.0
I'm going to try and test it on my device in following days.
Are there anyone interested in testing my build on your own device? If yes then write replay below and I'll share build output image files for flashing the device.
Greetings.
--------------------------------------------------------------------------------
Here are my output image files:
Sourceforge - g8441-aosp

tom.stanis said:
Hello.
I've managed to build AOSP Android 11.0 for Sony Xperia XZ1 Compact (G8441) following the guide:
Sony Open Devices - Build AOSP Android 11.0
I'm going to try and test it on my device in following days.
Are there anyone interested in testing my build on your own device? If yes then write replay below and I'll share build output image files for flashing the device.
Greetings.
Click to expand...
Click to collapse
I would be happy to test it out, thanks

My first issue with the build:
AOSP Android 11.0 - boot.img fail to flash

tom.stanis said:
My first issue with the build:
AOSP Android 11.0 - boot.img fail to flash
Click to expand...
Click to collapse
No worries. Take your time. I have two xz1 compacts so I can test on the secondary without worrying about my daily driver.

Added link in first post to my output image files. The issue with boot.img file still unsolved...

tom.stanis said:
Added link in first post to my output image files. The issue with boot.img file still unsolved...
Click to expand...
Click to collapse
Any specific flashing instructions?
EDIT: Unsuccessful. Tried a few different ways, through TWRP and Fastboot. Through fastboot resulted in unlocked bootloader warning and black screen with no further activity. Through twrp resulted in no os installed warning, though i did wipe before installing images.

AlexKarimov said:
Any specific flashing instructions?
Click to expand...
Click to collapse
I flashed with instructions from Sony-Open-Devices guide (link in the first post) - step 6 to 8.
AlexKarimov said:
Through fastboot resulted in unlocked bootloader warning and black screen with no further activity.
Click to expand...
Click to collapse
So the same result like on my device. Thanks for trying.
I'm looking forward to some help on my reported issue on sonyxperiadev github.

tom.stanis said:
I flashed with instructions from Sony-Open-Devices guide (link in the first post) - step 6 to 8.
Click to expand...
Click to collapse
So I did things a little differently but it's the same way I always flash .img(if not through TWRP). I have ADB and fastboot in the same folder so I open a command prompt as administrator and navigate to \adb and connect device in fastboot mode.
With device in fastboot mode and required images in adb folder:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash vendor vendor.img
fastboot reboot
In my experience, those are the only images necessary to flash but I always flash new fw after a clean flash with Newflasher.

Hi,
I will like to test your build