Related
VS910ZV9_05.S9_05.P58014.R5.tot
how use this frimware been waiting too root it u never know jcase
Holy crap... where did you get this?
This can't be real...
I'm confused what exactly is this?
nasirahmed said:
VS910ZV4_04.S4_04.P58008.R5.user.tot
Click to expand...
Click to collapse
One million internets to you, sir(or madam)...
Sent from my VS910 4G using Tapatalk
is this so we can get developers to make a custom recovery??????????
it is supposed to be the stock firmware for the revolution which would allow you to flash your system back to stock.
I have scanned the file and there are 3 files contained inside. I have not been able to extract them however. There are 3 img files inside which tally some 700+ meg.
Haxcid said:
it is supposed to be the stock firmware for the revolution which would allow you to flash your system back to stock.
I have scanned the file and there are 3 files contained inside. I have not been able to extract them however. There are 3 img files inside which tally some 700+ meg.
Click to expand...
Click to collapse
I have not found a way to extract the embedded files either. This is used with a Verizon only tool that is readily available. I wouldn't recommend flashing this unless you brick or destroy your phone (as a last result).
how u flash this
blkhwk5177 said:
how u flash this
Click to expand...
Click to collapse
It's a program called: LGNPST. You can Google it and you will find a few download locations.
I looked everywhere to find out how to load this, can somebody with lg experience point me in the right direction. im coming from a droid x, i would just sbf to restore a phone; that was easy
LGPNST does not support this device yet that I know of.
Verizon has a tool as well but I don't think it works with TOT files.
Haxcid said:
LGPNST does not support this device yet that I know of.
Verizon has a tool as well but I don't think it works with TOT files.
Click to expand...
Click to collapse
Yeah, you have to have the proper DLL, and we haven't found it yet. Cubed said he'd have a stock ROM out here shortly.
After that, he plans to deodex and release a cleaned version of stock (debinged)
majorpay said:
Yeah, you have to have the proper DLL, and we haven't found it yet. Cubed said he'd have a stock ROM out here shortly.
After that, he plans to deodex and release a cleaned version of stock (debinged)
Click to expand...
Click to collapse
I'm really looking forward to de-binged, de-odexd etc. Rom!!!
Hi,
this is the factory soft provided by LG to update VS910.
[LGDP2V42]only_VS910_20110430_download
but this soft need a protection dongle (need to be attached to PC) to run. LG Service Centers have this. It will be intersting if someone can find something useful from it.
I don't know if it works or not but...
http://www.mobile-files.com/forum/showthread.php/1384-How-load-TOT-file-with-LGNPST-LAB.1.2
So i guess in LGNPST, you just click browse, then put *.* in file name, hit enter, then select your .tot.
The problem isnt getting the software its the fact that unlike motorola the lg program requires a device specific .dll file so without that file the flash software and firmware are really of no use
Sent from my rooted and de-Bing-ed LG Revolution
vs910 dll for npst
here is the dll u need to flash this firmware... as far as firmware u should be able to flash with npst lab version. u need to register dll first
lazarus2297 said:
The problem isnt getting the software its the fact that unlike motorola the lg program requires a device specific .dll file so without that file the flash software and firmware are really of no use
Sent from my rooted and de-Bing-ed LG Revolution
Click to expand...
Click to collapse
give me the link for the lab installer and the rest of the steps
"FIRMWARE TEAM" Presents:
AT&T ICS 4.0.4
7.7.1Q-144_MB886_MR1-22_SIGNED_CFC.xml.zip
Upload by Skrilax_CZ, Download Coming Soon in http://sbf.droid-developers.org/dinara/list.php
Upload by daywalker04, Download Coming Soon in http://forum.xda-developers.com/showthread.php?t=1853522
Live: http://sbf.droid-developers.org/dinara/list.php
Just got my first Motorola with this phone, but think I borked it by messing with the radio bands. How does one flash these .xml or .sbf files to restore to original stock?
failed flashing process..unknown fastboot comand
I'm grabbing this for my friend, he can't get the update because he needs Wi-Fi and the phone won't connect to our University's Wi-Fi network. This won't break OTA for him though will it?
It's just as same as if you have applied OTA.
what is the update process?
Skrilax_CZ said:
It's just as same as if you have applied OTA.
Click to expand...
Click to collapse
so what exactly is the update procedure?
Here's what my phone is showing me.
system version: 77.1.7.MB886.ATT.en.US
android version: 4.0.3
Will this update change anything with the bootloader or anything like that?
aerohp said:
so what exactly is the update procedure?
Here's what my phone is showing me.
system version: 77.1.7.MB886.ATT.en.US
android version: 4.0.3
Will this update change anything with the bootloader or anything like that?
Click to expand...
Click to collapse
If you got 4.0.3 we need a copy of your OS before you upgrade. 4.0.3 has vulnerabilities that we need to get root. Sorry I don't know the procedure, but I am sure some dev will be more than willing to tell you.
Skrilax_CZ said:
It's just as same as if you have applied OTA.
Click to expand...
Click to collapse
popfan said:
If you got 4.0.3 we need a copy of your OS before you upgrade. 4.0.3 has vulnerabilities that we need to get root. Sorry I don't know the procedure, but I am sure some dev will be more than willing to tell you.
Click to expand...
Click to collapse
are there any specifics to the vulnerabilities?
anyways, if someone lets me know how make a copy of the OS, i'd be more than willing to do so.
aerohp said:
are there any specifics to the vulnerabilities?
anyways, if someone lets me know how make a copy of the OS, i'd be more than willing to do so.
Click to expand...
Click to collapse
Just saw this and need to let you know not to do any soft of fastboot or updating without backing up your files. The worry is you flash a retail bootloader and possibly cannot go back if you use these.
mattlgroff said:
Just saw this and need to let you know not to do any soft of fastboot or updating without backing up your files. The worry is you flash a retail bootloader and possibly cannot go back if you use these.
Click to expand...
Click to collapse
yeah, that's why i'm holding out... battery life sucks on the 4.0.3. it barely gets me 8-9 hours with moderate use. i've noticed there are huge drops in the battery level every now and then. i guess i'll just deal with it until we get the root thing sorted out.
is there a way to just mount the system.img.ext4? i've tried ext2explore and i've tried to mount it with Linux Reader. thanks
mrvirginia said:
is there a way to just mount the system.img.ext4? i've tried ext2explore and i've tried to mount it with Linux Reader. thanks
Click to expand...
Click to collapse
i'm wondering the same thing...i'm not flashing this on my phone but a friend of mine has a retail 4.0.4 and can't get the OTA. i;m not really sure how to flash this. i was hoping for it to be an sbf but thats not the case. can someone point the way please?
aerohp said:
i'm wondering the same thing...i'm not flashing this on my phone but a friend of mine has a retail 4.0.4 and can't get the OTA. i;m not really sure how to flash this. i was hoping for it to be an sbf but thats not the case. can someone point the way please?
Click to expand...
Click to collapse
just use fastboot oem fb_mode_set
then fastboot flash .......
cmvienneau said:
just use fastboot oem fb_mode_set
then fastboot flash .......
Click to expand...
Click to collapse
Flash what exactly? I've been trying this for the past hour and rsdlite won't work, moto-fastboot doesn't give any hints. I've tried MR1-22 and FFW-14.
darknessrise1234 said:
Flash what exactly? I've been trying this for the past hour and rsdlite won't work, moto-fastboot doesn't give any hints. I've tried MR1-22 and FFW-14.
Click to expand...
Click to collapse
Edit the XML file within the ZIP. Remove the two lines that contain "GETVAR". then flash the zip
mandrsn1 said:
Edit the XML file within the ZIP. Remove the two lines that contain "GETVAR". then flash the zip
Click to expand...
Click to collapse
After removing that, the modem lines and the oem_mode_set one... It still fails on the system.img.ext4.
EDIT: Out of thoughts. Stuck with a fastboot loop. Won't even allow me to turn it off.
I installed beats installer and my phone will not reboot. Any Ideas?
tried the same thing, now stuck at the boot animation. I have tried factory reset as well as downloading the firmware and trying to update from the sd card in recovery. No luck. It is now a brick unless someone can help...
Av8tor86 said:
tried the same thing, now stuck at the boot animation. I have tried factory reset as well as downloading the firmware and trying to update from the sd card in recovery. No luck. It is now a brick unless someone can help...
Click to expand...
Click to collapse
This sucks, I have no idea what could have happened. I really hope someone can help!!
I somehow screwed up a flash and now I have no OS installed but I can boot to Safestrap recovery. Any ideas on how to get the OS loaded? I'm going to see if I have an micro SD to SD converter so I can load the OS there and try to flash via external SD. Is there another way? Thanks!
delfinparis said:
I somehow screwed up a flash and now I have no OS installed but I can boot to Safestrap recovery. Any ideas on how to get the OS loaded? I'm going to see if I have an micro SD to SD converter so I can load the OS there and try to flash via external SD. Is there another way? Thanks!
Click to expand...
Click to collapse
I think the way you mentioned is the best and only way. Good luck!
What ROM are you going to flash?
delfinparis said:
I somehow screwed up a flash and now I have no OS installed but I can boot to Safestrap recovery. Any ideas on how to get the OS loaded? I'm going to see if I have an micro SD to SD converter so I can load the OS there and try to flash via external SD. Is there another way? Thanks!
Click to expand...
Click to collapse
I had the same issue, and tried flashing multiple times via the external SD. Unfortunately, given that I got to your current situation by wiping everything but the external SD, it still wouldn't work. I flashed multiple times, but it always just said that it couldn't mount /data and /system. I ended up doing the MJ5 Restore found here: http://forum.xda-developers.com/showthread.php?t=2559715
Trouble is, now I can't seem to get back to KK for the life of me....good luck!
jim256 said:
I had the same issue, and tried flashing multiple times via the external SD. Unfortunately, given that I got to your current situation by wiping everything but the external SD, it still wouldn't work. I flashed multiple times, but it always just said that it couldn't mount /data and /system. I ended up doing the MJ5 Restore found here: http://forum.xda-developers.com/showthread.php?t=2559715
Trouble is, now I can't seem to get back to KK for the life of me....good luck!
Click to expand...
Click to collapse
Yep - I used the MJ5 Restore and all is right with the world again. Thanks guys!!!
delfinparis said:
Yep - I used the MJ5 Restore and all is right with the world again. Thanks guys!!!
Click to expand...
Click to collapse
You going to stick with JB then or go KK?
jim256 said:
You going to stick with JB then or go KK?
Click to expand...
Click to collapse
I went to KK - you're not able to?
delfinparis said:
I went to KK - you're not able to?
Click to expand...
Click to collapse
Negative, was wondering if you might let me know precisely how you did it?
jim256 said:
Negative, was wondering if you might let me know precisely how you did it?
Click to expand...
Click to collapse
Ha - I don't remember. Where are you getting stuck?
delfinparis said:
Ha - I don't remember. Where are you getting stuck?
Click to expand...
Click to collapse
I'm going through this entire guide:
http://forum.xda-developers.com/showthread.php?t=2712039
I don't seem to get stuck anywhere until the very end. After I've finished all steps, it just never boots past the Note 3 splash screen.
You need to odin four files to boot into kk, look into mr tropazr's thread it's thorough and informative.
same issue
Okay i will start from the top. I have a note 3 on at&t that i used towel to root with. I downloaded su, busybox, safestrap,etc. Long story short i didnt back up when i wiped everything and i cannot get safestrap to laod any new rom, it states there is no os on the device. I then tried to use odin to reflash to stock and i get the smd header check failed message. Any help would be appreciated, I have also tried the mj5 recovery found here (http://forum.xda-developers.com/showthread.php?t=2559715&highlight=rev+check+fail) with odin and get the SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
theradioinside said:
Okay i will start from the top. I have a note 3 on at&t that i used towel to root with. I downloaded su, busybox, safestrap,etc. Long story short i didnt back up when i wiped everything and i cannot get safestrap to laod any new rom, it states there is no os on the device. I then tried to use odin to reflash to stock and i get the smd header check failed message. Any help would be appreciated, I have also tried the mj5 recovery found here (http://forum.xda-developers.com/showthread.php?t=2559715&highlight=rev+check+fail) with odin and get the SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
Click to expand...
Click to collapse
mj5 is 4.3 go here http://forum.xda-developers.com/note-3-att/general/n900aucucnc2-odin-files-t2838117
jerrycoffman45 said:
mj5 is 4.3 go here http://forum.xda-developers.com/note-3-att/general/n900aucucnc2-odin-files-t2838117
Click to expand...
Click to collapse
I tried those files as well and followed the same method step by step and it would not work. I am completely lost at this point.
theradioinside said:
I tried those files as well and followed the same method step by step and it would not work. I am completely lost at this point.
Click to expand...
Click to collapse
Perhaps I am missing something I downloaded all 5 files from mega, what is the fith file for the one that says n900aucucnc2_n900attcnc2_n900aucucnc2_home.tar.md5? I know where to properly place the other 4 files but im not certain about that one.
theradioinside said:
Perhaps I am missing something I downloaded all 5 files from mega, what is the fith file for the one that says n900aucucnc2_n900attcnc2_n900aucucnc2_home.tar.md5? I know where to properly place the other 4 files but im not certain about that one.
Click to expand...
Click to collapse
The home file is all 4 files in 1. Just use the 4 individual files to install original NC2 firmware and wipe at the same time. Ignore the home file.
440bro said:
The home file is all 4 files in 1. Just use the 4 individual files to install original NC2 firmware and wipe at the same time. Ignore the home file.
Click to expand...
Click to collapse
I tried that and I am goint to attempt to put the 4 in one on the ap spot, i think it says pda in odin.
theradioinside said:
I tried that and I am goint to attempt to put the 4 in one on the ap spot, i think it says pda in odin.
Click to expand...
Click to collapse
Yes that would be correct. Using the home file is like using all 4 files only the home file doesn't wipe before installing. It installs firmware like an ota update would. I thought using the 4 files would reset you, and give you a clean install.
I found the fix bro THANK ME I have the same problem and I stumbled to this
Go to this forum http://forum.xda-developers.com/showpost.php?p=51572044&postcount=2 and search for this word Quick Jump Start
follow the steps. YOU'RE WELCOME
theradioinside said:
I tried that and I am goint to attempt to put the 4 in one on the ap spot, i think it says pda in odin.
Click to expand...
Click to collapse
see if you can fix it using the link in the above post if not let me know and I will back up my stock ATT KK 4.4.2 NC2 in safe strap after factory reset and I can send it to you. You can flash that and see if that works.
And what I understand is you started from stock 4.4.2 NC2 and than you towel root than installed SU and busybox and than installed the SS . After you went into SS, did you wipe the stock rom slot? Can you please explain in detail including each step so we know.
This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!
The emergency utility was able to get me out of my soft brick. Thank you sir!
xt925
Does it works on xt925 ?
Thanks.
morcego.surf said:
Does it works on xt925 ?
Thanks.
Click to expand...
Click to collapse
It does, the emergency will flash an XT926 firmware, might have to change internal files I guess. It did got me out of a flash failure then could get back into fastboot and then flash my Telcel firmware for my XT925.
Is this for XT925?! Is this the first thing i have to do to get Kit Kat official leaked last week?
andreluigo said:
Is this for XT925?! Is this the first thing i have to do to get Kit Kat official leaked last week?
Click to expand...
Click to collapse
i have seen some lazy people, but i must say you take the cake.
this thread was 4 hole post long before you posted. 2 of which, asked and answered your exact first question.
no self respecting person is going to help you, when you cant even read a 4 post long thread before asking a question in it.
open1your1eyes0 said:
This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!
Click to expand...
Click to collapse
Just wanted to thank you for creating this tool, man. The Emergency Fix really saved my skin from a soft brick.
Pretty sure this utility has bricked my phone. I was on 4.1.2 and was rooted and tried using the utility to return to stock. After the utility completed it gets stuck on the AP fastboot menu and it says Boot Failure. Any ideas to fix it?
Nice to know it.
open1your1eyes0 said:
This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!
Click to expand...
Click to collapse
Hello,
Could you please write in big red letters in the beginning of your post : "ONLY FOR XT926, Do not use it for XT925" ?
Thank you
yoderz said:
Pretty sure this utility has bricked my phone. I was on 4.1.2 and was rooted and tried using the utility to return to stock. After the utility completed it gets stuck on the AP fastboot menu and it says Boot Failure. Any ideas to fix it?
Click to expand...
Click to collapse
Were you able to fix?
for OP, I have similar situation as yoderz on verizon, I get "Software Update Failed" and no OTA. Stuck on 9.18.XT926.Verizon.en.US
150kwh said:
Were you able to fix?
for OP, I have similar situation as yoderz on verizon, I get "Software Update Failed" and no OTA. Stuck on 9.18.XT926.Verizon.en.US
Click to expand...
Click to collapse
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!
yoderz said:
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!
Click to expand...
Click to collapse
Thanks, worked for me now. Super happy to luck out on timing so I could get unlocked & root, wish I had seen this earlier.
..Now, if only their forum would validate me. (Maybe a week timeout??)
yoderz said:
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!
Click to expand...
Click to collapse
so you have XT925 and this link helped you fix the install, and you're now on the official KK? does LTE and GSM work for you?
Ok so, I kinda effed up. Originally my Play Store among other google services had been acting up and were unusable so I was troubleshooting for a fix. I tried everything except a factory reset, so of course I do that , but as I was reseting I also lost my root. It had been awhile since I rooted my phone so I followed the steps of the video I was watching. (How to Root Galaxy Note 5 on Android 6.0/6.0.1 Marshmallow!) He happens to reformat his phone in the video so I did as well, brainfarting on the fact that I would lose my backups. I start tinkering with stuff because after factory reset in the ROM I still have no access to any of the Google services. I deleted System and was gonna re-flash/use my backups (that I thought I had) to fix everything. Well, I tried downloading the stock firmware for my model but it's not flashable via Odin as it's in ZIP form, and when I attempt unzipping I get an error, tried firmware from multiple mirrors. So I tried running a custom ROM since there is a lot more support on that now. I tried the Nemesis_V3_N7-port first, it flashed succesfully, tried booting for a solid 30 minutes or so before I shut it down and tried a different rom. I think it was then or after I flashed the latest MOAR that I started bootlooping into TWRP.
Please help!! I can normally figure this stuff out once I break it, but I've been fixing this phone for the past 12 hours and have yet to find a solution.
So you wiped your phone and have no rom? so you can either bootloop, go into twrp or go into dl mode? Right?
SpencerA99 said:
So you wiped your phone and have no rom? so you can either bootloop, go into twrp or go into dl mode? Right?
Click to expand...
Click to collapse
Well I bootloop INTO recovery mode. It says the Seandroid Enforcing in the top left corner. I was previously rooted and it had always said that but I never experienced any issues with it
Delerios said:
Ya. Ik it's a soft brick since I still have recovery options but I din't know where to go from here
Click to expand...
Click to collapse
you need to download the .tar file for your n920p. Then in odin click on ap and then click the .tar file. run and you should go back to stock. Then you can root again! Here yah go: https://devs-lab.com/how-to-unbrick-samsung-galaxy-note-5.html
In my experience you cant do anything in twrp to save you unless you made a nandroid back up or have an extra rom. Ive done this before and I had to odin the stock firmware
SpencerA99 said:
you need to download the .tar file for your n920p. Then in odin click on ap and then click the .tar file. run and you should go back to stock. Then you can root again! Here yah go: https://devs-lab.com/how-to-unbrick-samsung-galaxy-note-5.html
In my experience you cant do anything in twrp to save you unless you made a nandroid back up or have an extra rom. Ive done this before and I had to odin the stock firmware
Click to expand...
Click to collapse
I tried downloading the firmware quite a few times, it doesn't let me extract it from it's zip. I just tried 7 Zip, 9Zip, and the windows built in unzipper. Would you try downloading and extracting to tell me if you have the same issue? It comes up with an error at about 17% saying it's missing a crucial file..
Delerios said:
I tried downloading the firmware quite a few times, it doesn't let me extract it from it's zip. I just tried 7 Zip, 9Zip, and the windows built in unzipper. Would you try downloading and extracting to tell me if you have the same issue? It comes up with an error at about 17% saying it's missing a crucial file..
Click to expand...
Click to collapse
will do. ill update you when its done downloading, says about 20 mins...
SpencerA99 said:
will do. ill update you when its done downloading, says about 20 mins...
Click to expand...
Click to collapse
Thank you Spencer, really appreciate the help. I've tried a couple other links across other similar firmware flashing forums to no avail. So if you have a problem too, it's gotta be a batch of incomplete files.
Delerios said:
Thank you Spencer, really appreciate the help. I've tried a couple other links across other similar firmware flashing forums to no avail. So if you have a problem too, it's gotta be a batch of incomplete files.
Click to expand...
Click to collapse
it worked for me using winwar to extract from the website i linked above
SpencerA99 said:
it worked for me using winwar to extract from the website i linked above
Click to expand...
Click to collapse
okey dokey, I'm re-downloading and going to attempt with Winrar will come back to update in 30ish if it works.
I was so hyped, I thought it was gonna work. It got to 99% and then said:
C:\Users\Delerios\Downloads\N920PVPU2BPC3_N920PSPT2BPC3_SPR.zip: Checksum error in C:\Users\Delerios\AppData\Local\Temp\Rar$DIa0.337\N920PVPU2BPC3_N920PSPT2BPC3_N920PVPU2BPC3_HOME.tar.md5. The file is corrupt
C:\Users\Delerios\Downloads\N920PVPU2BPC3_N920PSPT2BPC3_SPR.zip: The archive is corrupt
So I think I'm gonna try and find yet another page to download from. Did you download the version for N920P, or for the N920T you have?
Delerios said:
I was so hyped, I thought it was gonna work. It got to 99% and then said:
C:\Users\Delerios\Downloads\N920PVPU2BPC3_N920PSPT2BPC3_SPR.zip: Checksum error in C:\Users\Delerios\AppData\Local\Temp\Rar$DIa0.337\N920PVPU2BPC3_N920PSPT2BPC3_N920PVPU2BPC3_HOME.tar.md5. The file is corrupt
C:\Users\Delerios\Downloads\N920PVPU2BPC3_N920PSPT2BPC3_SPR.zip: The archive is corrupt
So I think I'm gonna try and find yet another page to download from. Did you download the version for N920P, or for the N920T you have?
Click to expand...
Click to collapse
I downloaded the n920p version to test for you. Ill upload the .tar file for you.. itll probably take a while
SpencerA99 said:
I downloaded the n920p version to test for you. Ill upload the .tar file for you.. itll probably take a while
Click to expand...
Click to collapse
That would be insane man, TY!! I've been hitting every forum I could looking for a download that worked for me. I wonder why I can't access it, I'm using Chrome/Windows 10. I was abouta to go see if it worked on my old laptop but I figured it was a long shot.
Delerios said:
That would be insane man, TY!! I've been hitting every forum I could looking for a download that worked for me. I wonder why I can't access it, I'm using Chrome/Windows 10. I was abouta to go see if it worked on my old laptop but I figured it was a long shot.
Click to expand...
Click to collapse
All you really need to do is re flash your twrp so it will re root the phone again! After you flash twrp you can easily use adb to push the files back to your phone. This is all I did to a phone I repaired.. You can even use fastboot flash Your920PFirmware.tar..
Here yah go: https://drive.google.com/open?id=0B7o0BZcV7Ra3cl9hekk1VHJ3c1k
I tried to upload it on xda but that just didnt work lol
SpencerA99 said:
Here yah go: https://drive.google.com/open?id=0B7o0BZcV7Ra3cl9hekk1VHJ3c1k
I tried to upload it on xda but that just didnt work lol
Click to expand...
Click to collapse
Hey, thank you man. I'm downloading right now, I'll let ya know when I get it working.
SpencerA99 said:
Here yah go: https://drive.google.com/open?id=0B7o0BZcV7Ra3cl9hekk1VHJ3c1k
I tried to upload it on xda but that just didnt work lol
Click to expand...
Click to collapse
One thing after another... So I attempted flashing and I got the "Pit for mapping" error. I looked up my Pit file and put it into odin but I'm still getting the problem. Tried wiping the Cache and Dalvik + Factory Reset but nada. Any ideas?
Delerios said:
One thing after another... So I attempted flashing and I got the "Pit for mapping" error. I looked up my Pit file and put it into odin but I'm still getting the problem. Tried wiping the Cache and Dalvik + Factory Reset but nada. Any ideas?
Click to expand...
Click to collapse
No clue man. That's way past me
SpencerA99 said:
No clue man. That's way past me
Click to expand...
Click to collapse
Dang. Hey man appreciate all your help, thank you for the file. I'll post the solution when I figure all this out in case there's another poor soul in the same boat
I FIXED IT. It was my computer, I don't know what it was and I don't care lol. But I tried the correct firmware through Odin on my other Windows PC and it worked flawlessly. If anybody runs into any issues unzipping or flashing through Odin, last resort just clean install on the pc or find another one.