Okay so I was flashing the 5.6.890 XML and it fails everytime.
RSD Lite shows-
Failed flashing process. 6/18 flash cdt.bin "cdt.bin"-> Phone return FAIL-
On the phone it shows-
AP Fastboot Flash Mode (s) (Flash Failure)
0A.53
Help is appreciated
I think I need help
can you? @sd_shadow
Josephdbrewer25 said:
Okay so I was flashing the 5.6.890 XML and it fails everytime.
RSD Lite shows-
Failed flashing process. 6/18 flash cdt.bin "cdt.bin"-> Phone return FAIL-
On the phone it shows-
AP Fastboot Flash Mode (s) (Flash Failure)
0A.53
Help is appreciated
Click to expand...
Click to collapse
RSD Lite version?
Windows version?
MD5 matched?
Sent from my XT907 using Tapatalk
sd_shadow said:
RSD Lite version?
Windows version?
MD5 matched?
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
RSD Lite version 6.1.5
Windows Vista
Not sure if MD5 matched
Josephdbrewer25 said:
RSD Lite version 6.1.5
Click to expand...
Click to collapse
should be good
Windows Vista
Click to expand...
Click to collapse
should be good
Not sure if MD5 matched
Click to expand...
Click to collapse
all android files should be verified, IMO
VRZ_XT862_5.5.1_84_D3G-55_1FF_01.xml.zip
MD5:32A51F7596E0965907FD2D7D89AFCC78
https://sites.google.com/site/sdshadowscollection/home/hash-checksums
is this a file you have used before?
could be bad usb cable
usb port
sd_shadow said:
should be good
should be good
all android files should be verified, IMO
VRZ_XT862_5.5.1_84_D3G-55_1FF_01.xml.zip
MD5:32A51F7596E0965907FD2D7D89AFCC78
https://sites.google.com/site/sdshadowscollection/home/hash-checksums
is this a file you have used before?
could be bad usb cable
usb port
Click to expand...
Click to collapse
I have used one with this name=> VRZ_XT862_5.5.1_84_D3G-66_M2-10_1FF_01a.xml.zip
That's the only one I've used and that one is the one where I lost data and internal SD using RSD Lite v5.7. I just updated rsd last night
Checking MD5....and well, it said codes do not match. So do I just redownload the file??
Oh and the cable is new, the port on the phone does seem a bit wiggly but no shortage, data transfers real quick.
sd_shadow said:
should be good
should be good
all android files should be verified, IMO
VRZ_XT862_5.5.1_84_D3G-55_1FF_01.xml.zip
MD5:32A51F7596E0965907FD2D7D89AFCC78
https://sites.google.com/site/sdshadowscollection/home/hash-checksums
is this a file you have used before?
could be bad usb cable
usb port
Click to expand...
Click to collapse
Scratch that. They match. I done it wrong, sorry about that.
What could be the problem?
Josephdbrewer25 said:
Scratch that. They match. I done it wrong, sorry about that.
What could be the problem?
Click to expand...
Click to collapse
Not sure
battery is ok?
could try flashing with moto-fastboot.exe
see my Unbrick Moto device with moto-fastboot.exe
sd_shadow said:
Not sure
battery is ok?
could try flashing with moto-fastboot.exe
see my Unbrick Moto device with moto-fastboot.exe
Click to expand...
Click to collapse
I can turn it on by holding the 'm' key and power, click normal power up. When I just hit power it comes up ap fastboot.....flash failure.
I think the battery has a 50% charge on it
I'll try it that way.
Josephdbrewer25 said:
I can turn it on by holding the 'm' key and power, click normal power up. When I just hit power it comes up ap fastboot.....flash failure.
I think the battery has a 50% charge on it
I'll try it that way.
Click to expand...
Click to collapse
try
Code:
moto-fastboot flash cdt.bin cdt.bin
also can wipe data with
Code:
moto-fastboot -w
reboot
Code:
moto-fastboot reboot
sd_shadow said:
try
Code:
moto-fastboot flash cdt.bin cdt.bin
also can wipe data with
Code:
moto-fastboot -w
reboot
Code:
moto-fastboot reboot
Click to expand...
Click to collapse
It's failing everytime
C:\Users\Joseph\Desktop\moto-fastboot>moto-fastboot flash cdt.bin cdt.bin
sending 'cdt.bin' (16 KB)... OKAY [ 0.008s]
writing 'cdt.bin'... INFOPreflash validation failure
FAILED (remote: )
same with flashing boot.img
C:\Users\Joseph\Desktop\moto-fastboot>moto-fastboot flash boot boot.img
sending 'boot' (8192 KB)... OKAY [ 1.199s]
writing 'boot'... INFOPreflash validation failure
FAILED (remote: )
Josephdbrewer25 said:
It's failing everytime
C:\Users\Joseph\Desktop\moto-fastboot>moto-fastboot flash cdt.bin cdt.bin
sending 'cdt.bin' (16 KB)... OKAY [ 0.008s]
writing 'cdt.bin'... INFOPreflash validation failure
FAILED (remote: )
same with flashing boot.img
C:\Users\Joseph\Desktop\moto-fastboot>moto-fastboot flash boot boot.img
sending 'boot' (8192 KB)... OKAY [ 1.199s]
writing 'boot'... INFOPreflash validation failure
FAILED (remote: )
Click to expand...
Click to collapse
next option is flashing 906
sd_shadow said:
next option is flashing 906
Click to expand...
Click to collapse
I just tried to just flash system and preinstall from the 890. It was success. If that was then shouldn't the others be??
Josephdbrewer25 said:
I just tried to just flash system and preinstall from the 890. It was success. If that was then shouldn't the others be??
Click to expand...
Click to collapse
after a success, try reboot
sd_shadow said:
after a success, try reboot
Click to expand...
Click to collapse
Its still popping up AP Fastboot Flash Mode (S) (Flash Failure)
I'm about to try the 906.
This thing has gotta work again
Josephdbrewer25 said:
Its still popping up AP Fastboot Flash Mode (S) (Flash Failure)
I'm about to try the 906.
This thing has gotta work again
Click to expand...
Click to collapse
cdt.bin checks to see if carrier/region match.
guessing some how version on phone got corrupt, and now does not match flash version.
could try deleting cdt.bin with moto-fastboot.exe, but that could make it worse.
sd_shadow said:
cdt.bin checks to see if carrier/region match.
guessing some how version on phone got corrupt, and now does not match flash version.
could try deleting cdt.bin with moto-fastboot.exe, but that could make it worse.
Click to expand...
Click to collapse
I got the 906 to flash successfully, I think. RSD said failed while flashing emmstorage (I think) and the phone said battery low. Good news is that it powers up correctly, it even charges while it's off.
Should I just leave it charging and re-do the flashing when it's done or is it okay like it is??
I turn it on and it has a notification saying "Blank Internal Storage"
Josephdbrewer25 said:
I got the 906 to flash successfully, I think. RSD said failed while flashing emmstorage (I think) and the phone said battery low. Good news is that it powers up correctly, it even charges while it's off.
Should I just leave it charging and re-do the flashing when it's done or is it okay like it is??
I turn it on and it has a notification saying "Blank Internal Storage"
Click to expand...
Click to collapse
I would charge 100%, then reboot, but sounds good
---------- Post added at 03:06 PM ---------- Previous post was at 02:58 PM ----------
Josephdbrewer25 said:
I turn it on and it has a notification saying "Blank Internal Storage"
Click to expand...
Click to collapse
may need to factory reset in rom, or fastboot -w
---------- Post added at 03:07 PM ---------- Previous post was at 03:06 PM ----------
or format internal sd card
sd_shadow said:
I would charge 100%, then reboot, but sounds good
---------- Post added at 03:06 PM ---------- Previous post was at 02:58 PM ----------
may need to factory reset in rom, or fastboot -w
---------- Post added at 03:07 PM ---------- Previous post was at 03:06 PM ----------
or format internal sd card
Click to expand...
Click to collapse
Factory reset was already done. It popped up the set up screen when i powered it up.
I formatted the Internal. It seems to be working. I still might re-flash when charge is at 100%.
sd_shadow said:
I would charge 100%, then reboot, but sounds good
---------- Post added at 03:06 PM ---------- Previous post was at 02:58 PM ----------
may need to factory reset in rom, or fastboot -w
---------- Post added at 03:07 PM ---------- Previous post was at 03:06 PM ----------
or format internal sd card
Click to expand...
Click to collapse
I reflashed the 906. It changed from 0A.53 to 0A.64. Phone works perfectly now. Thanx for the help :good:
Related
Hello dear friends!
I have a problem with my Atrix HD. I have problems to flash the boot.img and the system.img.
I tried with RSD Lite, Myth Tools - AHD, Fastboot flash and none have been able to flash it. I downloaded all drivers!
may be permanent brick?
The only thing I shows Battery Low, Battery OK sometimes.
I saw on some forums that the "Factory Cable" has the possibility to flash my phone.
What are the chances of coming back to life my MB886?
Here the details of what I show!
AP Fastboot Flash Mode (s)
10.9b (*) (sha-2e68372, 2012-11-17 23:33:08)
eMMC Info: Size 8GB
Device is LOCKED, Status code: 0
Low Battery
USB Connect
Data Cable
Partition (boot) Downgraded Security Version
Fastboot Reason: Boot Failure.
Waiting for your prompt help
Thank you.
Greetings!
adal_elfather said:
Hello dear friends!
I have a problem with my Atrix HD. I have problems to flash the boot.img and the system.img.
I tried with RSD Lite, Myth Tools - AHD, Fastboot flash and none have been able to flash it. I downloaded all drivers!
may be permanent brick?
The only thing I shows Battery Low, Battery OK sometimes.
I saw on some forums that the "Factory Cable" has the possibility to flash my phone.
What are the chances of coming back to life my MB886?
Here the details of what I show!
AP Fastboot Flash Mode (s)
10.9b (*) (sha-2e68372, 2012-11-17 23:33:08)
eMMC Info: Size 8GB
Device is LOCKED, Status code: 0
Low Battery
USB Connect
Data Cable
Partition (boot) Downgraded Security Version
Fastboot Reason: Boot Failure.
Waiting for your prompt help
Thank you.
Greetings!
Click to expand...
Click to collapse
nothing to panic... hold power+vol up+vol down to power your device off and put it to charge (do not charge with pc/laptop, use a AC power source)
after an hour, follow these steps..
1)download the required firmware from here and fastboot binaries
2)extract the zip and place downloaded fastboot binaries in the extracted directory and open terminal in this directory.
3)type the following commands in order
fastboot flash modem NON-HLOS.bin
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot flash system system.img
fastboot -w
fastboot erase cache
fastboot reboot
Click to expand...
Click to collapse
Many Thanks for your help.
I tried to, but I have always problems with Flash.
when flashing the NON-HLOS, there is no problem.
but when I'm flashing the boot.img always gives me this problem.
sending 'boot' (10240 KB) ...
OKAY [0.833s]
writing 'boot' ...
Preflash validation failed
FAILED (remote failure)
finished. Total time: 1.124s
and when I try the system.img
sending 'system' (30720 KB) ...
OKAY [2.506s]
writing 'system' ...
Preflash validation failed
FAILED (remote failure)
finished. Total time: 2.842s
and on the phone adds the following:
Partition (Boot) Security Version Downgraded
preflash validation failed for boot
Partition (System) Security Version Downgraded
PIV validation for system block failed
Invalid PIV image: system
What is Security Version Downgraded?
What is PIV?
Again, thank you very much for the help.
waiting for comments
regards
adal_elfather said:
Many Thanks for your help.
I tried to, but I have always problems with Flash.
when flashing the NON-HLOS, there is no problem.
but when I'm flashing the boot.img always gives me this problem.
sending 'boot' (10240 KB) ...
OKAY [0.833s]
writing 'boot' ...
Preflash validation failed
FAILED (remote failure)
finished. Total time: 1.124s
and when I try the system.img
sending 'system' (30720 KB) ...
OKAY [2.506s]
writing 'system' ...
Preflash validation failed
FAILED (remote failure)
finished. Total time: 2.842s
and on the phone adds the following:
Partition (Boot) Security Version Downgraded
preflash validation failed for boot
Partition (System) Security Version Downgraded
PIV validation for system block failed
Invalid PIV image: system
What is Security Version Downgraded?
What is PIV?
Again, thank you very much for the help.
waiting for comments
regards
Click to expand...
Click to collapse
What firmware are you trying to flash?
Sent from my MB886 using xda app-developers app
Aingaran said:
What firmware are you trying to flash?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the help.
I tried with all 3 of ATT & T. Currently I am trying to "MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-ATT-US_BuildA.xml.zip"
Jelly Bean 4.1.1
but with the other 2 (ICS) always send me the same error.
Waiting for your comments
thanks
regards
adal_elfather said:
Thanks for the help.
I tried with all 3 of ATT & T. Currently I am trying to "MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-ATT-US_BuildA.xml.zip"
Jelly Bean 4.1.1
but with the other 2 (ICS) always send me the same error.
Waiting for your comments
thanks
regards
Click to expand...
Click to collapse
Try Mexican retail... Last hope... Is your boot loader locked? If so, that may be the reason... Is your phone working... Any ROM inside it?
Sent from my MB886 using xda app-developers app
Aingaran said:
Try Mexican retail... Last hope... Is your boot loader locked? If so, that may be the reason... Is your phone working... Any ROM inside it?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the help.
My phone is AT&T and had no unlocked bootloader or modified roms.
regards
adal_elfather said:
Thanks for the help.
My phone is AT&T and had no unlocked bootloader or modified roms.
regards
Click to expand...
Click to collapse
Is your phone working with that att ROM now? Or have you messes up with anything...
Sent from my MB886 using xda app-developers app
Aingaran said:
Is your phone working with that att ROM now? Or have you messes up with anything...
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Not work.
Fastboot load only. that's all it does
adal_elfather said:
Not work.
Fastboot load only. that's all it does
Click to expand...
Click to collapse
what happend to the stock rom? what did you do?
Aingaran said:
what happend to the stock rom? what did you do?
Click to expand...
Click to collapse
I tried to install ZIP from SD card and this was the result.
I already tried flash the 3 firmware stock from AT&T and the Mexican. With all is same result.
Can you get to fastboot mode? Unlock the bootloader and flash stock.
Sent from my PACMAN MATRIX HD MAXX
adal_elfather said:
I tried to install ZIP from SD card and this was the result.
I already tried flash the 3 firmware stock from AT&T and the Mexican. With all is same result.
Click to expand...
Click to collapse
What ROM is that? That you flashed from stock recovery?
Sent from my MB886 using xda app-developers app
---------- Post added at 10:53 PM ---------- Previous post was at 10:46 PM ----------
adal_elfather said:
Not work.
Fastboot load only. that's all it does
Click to expand...
Click to collapse
deeje00 said:
Can you get to fastboot mode? Unlock the bootloader and flash stock.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
how will you unlock your bootloader only with fastboot?!! if that is possible, please give that link, it will help him a lot
deeje00 said:
Can you get to fastboot mode? Unlock the bootloader and flash stock.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Yes, I can get Fastboot mode.
How to unlock the bootloader in fastboot?
Thanks!
Well with any luck your computer might find your phone in the root program so you can root and then unlock.
Sent from my PACMAN MATRIX HD MAXX
Aingaran said:
Try Mexican retail... Last hope... Is your boot loader locked? If so, that may be the reason... Is your phone working... Any ROM inside it?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
I tried, but the result is no longer the same.
Try using this to root and then unlock.
http://forum.xda-developers.com/showthread.php?t=2262726
Make sure to install the drivers first.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Well with any luck your computer might find your phone in the root program so you can root and then unlock.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
I saw that to unlock the bootloader need to be root, you got marked unknown sources. and that I can not do with the phone bricked.
Could you please send me a program or application with which I can do with the phone brick?
Thanks for the help.
deeje00 said:
Try using this to root and then unlock.
http://forum.xda-developers.com/showthread.php?t=2262726
Make sure to install the drivers first.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Ok, thanks, I will try.
Then I notify
deeje00 said:
Try using this to root and then unlock.
http://forum.xda-developers.com/showthread.php?t=2262726
Make sure to install the drivers first.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
I tried to unlock the bootloader, but I can not do it.
I get the following message in the application and nothing happens!
Hi guys! How are you? I hope you are fine, because I'm not lol.
Well, I'm new in this things, but I can install CM9 and 7 in my old devices thanks to your guides and tutorials, I really apreciated!.
But now, I'm stucking with my new phone, because I flashed wrong and I don't know what to do.
Ok let's start to explain my problem:
My phone is stucked in the fastboot screen and no advance. When I press "pwr vol+-" and select Recovery, nothing happens, only showme the "Motorola Dual Core Technology logo" and returns to fastboot.
...........................................................................
AP FastBoot Flash Mode (S)
10.98(*) (sha-2e68372, 2012-11-17 23:33:08)
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
FastBoot Reason: Sticky bit factory_fastboot
...........................................................................
Ok, and when try to enter to recovery screen "pwr, vol+-" it's show me:
...........................................................................
Invalid Flash Mode (S)
10.98(*) (sha-2e68372, 2012-11-17 23:33:08)
eMMC Info: Size 8GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Partition (Boot) Security Version Downgraded
Fastboot Reason: Boot Failure
...........................................................................
Sometimes, indicate "Batery Low"...its very frustrating because I love my ohine but I can't make work and I don't know what is happend...
I see some tutorials, specialy from @sleevydude, to unlock the bootloader, but the "fastboot.exe" appears and dissapears, and I can't acces to program tools...
Another big problem, I'm from Argentina, and my language is spanish, after all, my english is good, and I can understand 90% if you say something...sorry if that is offtopic or something.
I've tryed with the metod from TheMythTeam, but doesn't work...keep stucked...
Ok guys, I hope you help me...miss my phone so much
Well you can't open the fastboot.exe because it's not a regular program. You just open a command Window in the folder it's located in.
Sent from my PACMAN MATRIX HD MAXX
It looks to me like your device has a locked bootloader.
What rom did you try to flash? What did you use to flash it?
deeje00 said:
Well you can't open the fastboot.exe because it's not a regular program. You just open a command Window in the folder it's located in.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Thanks mate, I'm testing the commands, but maybe I'll look at the tutorials carefully!
Soon I will have them new, wishing luck! :good:
audit13 said:
It looks to me like your device has a locked bootloader.
What rom did you try to flash? What did you use to flash it?
Click to expand...
Click to collapse
Hi! this ROM..
MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-ATT-US_BuildA.xml
I've used RSD Lite...but I think the problem is the bootloader locked...like you said!
Ok, I trying again...let's see what I can do.
Thanks for answer :good:
Ok...I found a new problem, and suspect this is the big problem of all problems!
My computer can't recognize the device, I successfully installed Motorola USB drivers (2.3.9 version) and when I trying to unlock the bootloader ussing Motopocalypse by Dan, doesn't happens...shows the follow message:
Waiting for device...
* daemon not running. starting it now in port 5037 *
* daemon started successfully *
And then, nothings is happens!...not show anything more....
Any suggestions?
Please hel me! :crying:
What OS was originally on the phone? Without an unlocked bootloader, I don't think you can flash an earlier rom version if the original rom version was higher.
I think those zip files needs to flashed via cwm, but I'm not 100% sure. I think that's how I got the Mexico Retail onto my Atrix HD.
You could try this: http://forum.xda-developers.com/showthread.php?t=2299113 or http://forum.xda-developers.com/showthread.php?t=2259661
Stock roms: http://forum.xda-developers.com/showthread.php?t=2209660
audit13 said:
What OS was originally on the phone? Without an unlocked bootloader, I don't think you can flash an earlier rom version if the original rom version was higher.
I think those zip files needs to flashed via cwm, but I'm not 100% sure. I think that's how I got the Mexico Retail onto my Atrix HD.
You could try this: http://forum.xda-developers.com/showthread.php?t=2299113 or http://forum.xda-developers.com/showthread.php?t=2259661
Stock roms: http://forum.xda-developers.com/showthread.php?t=2209660
Click to expand...
Click to collapse
I try manually, but I keep getting the same errors as the automatic method, and not to do, should I throw it away and buy a new motherboard or buy on eBay?
As the phone is AT & T USA, I have no warranty here in Argentina ...
I'm really frustrated .....
Here are the errors:
> fastboot flash system system.img.ext4
sending 'system' (262144 KB) ...
OKAY [19.854s]
writing 'system' ...
Preflash validation failed
FAILED (remote failure)
finished. Total time: 20.155s
> fastboot flash boot boot.img
sending 'boot' (10240 KB) ...
OKAY [0.865s]
writing 'boot' ...
Preflash validation failed
FAILED (remote failure)
finished. Total time: 1.137s
if anyone knows anything more, or want help clarify that this LOCKED BOOTLOADER
Wipe and Restore
Checkout my post on this thread. Just skip making a backup.
http://forum.xda-developers.com/showthread.php?t=2394238
PM me and click Thanks if I helped.
lucasantarella said:
Checkout my post on this thread. Just skip making a backup.
http://forum.xda-developers.com/showthread.php?t=2394238
PM me and click Thanks if I helped.
Click to expand...
Click to collapse
Thanks! I would try and let's see what happens!
**sorry for my bad english**
Reactorzero said:
I try manually, but I keep getting the same errors as the automatic method, and not to do, should I throw it away and buy a new motherboard or buy on eBay?
As the phone is AT & T USA, I have no warranty here in Argentina ...
I'm really frustrated .....
Here are the errors:
> fastboot flash system system.img.ext4
sending 'system' (262144 KB) ...
OKAY [19.854s]
writing 'system' ...
Preflash validation failed
FAILED (remote failure)
finished. Total time: 20.155s
> fastboot flash boot boot.img
sending 'boot' (10240 KB) ...
OKAY [0.865s]
writing 'boot' ...
Preflash validation failed
FAILED (remote failure)
finished. Total time: 1.137s
if anyone knows anything more, or want help clarify that this LOCKED BOOTLOADER
Click to expand...
Click to collapse
Try using fastboot binaries from skeevy 's thread..
Sent from my MB886 using xda app-developers app
Reactorzero said:
Hi guys! How are you? I hope you are fine, because I'm not lol.
Well, I'm new in this things, but I can install CM9 and 7 in my old devices thanks to your guides and tutorials, I really apreciated!.
But now, I'm stucking with my new phone, because I flashed wrong and I don't know what to do.
Ok let's start to explain my problem:
My phone is stucked in the fastboot screen and no advance. When I press "pwr vol+-" and select Recovery, nothing happens, only showme the "Motorola Dual Core Technology logo" and returns to fastboot.
...........................................................................
AP FastBoot Flash Mode (S)
10.98(*) (sha-2e68372, 2012-11-17 23:33:08)
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
FastBoot Reason: Sticky bit factory_fastboot
...........................................................................
Ok, and when try to enter to recovery screen "pwr, vol+-" it's show me:
...........................................................................
Invalid Flash Mode (S)
10.98(*) (sha-2e68372, 2012-11-17 23:33:08)
eMMC Info: Size 8GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Partition (Boot) Security Version Downgraded
Fastboot Reason: Boot Failure
...........................................................................
Sometimes, indicate "Batery Low"...its very frustrating because I love my ohine but I can't make work and I don't know what is happend...
I see some tutorials, specialy from @sleevydude, to unlock the bootloader, but the "fastboot.exe" appears and dissapears, and I can't acces to program tools...
Another big problem, I'm from Argentina, and my language is spanish, after all, my english is good, and I can understand 90% if you say something...sorry if that is offtopic or something.
I've tryed with the metod from TheMythTeam, but doesn't work...keep stucked...
Ok guys, I hope you help me...miss my phone so much
Click to expand...
Click to collapse
I just realized that your system image says ".ext4" Fastboot does not normally format a partition as ext4 by default, maybe never at all. Make sure you have the correct Fastboot files.
Best of luck!
---------- Post added at 10:40 AM ---------- Previous post was at 10:31 AM ----------
Reactorzero said:
Thanks! I would try and let's see what happens!
**sorry for my bad english**
Click to expand...
Click to collapse
Just to try, flash this Fastboot package with RSD Lite 6.1. I have a feeling this will work.
Package: http://sbfdownload.droid-developers..._FFW-20-27-release-keys-ATT-US_BuildA.xml.zip
** I take no responsibility for any damage done to your phone. **
---------- Post added at 10:49 AM ---------- Previous post was at 10:40 AM ----------
The reason I believe my blast post will work is because your error while trying to flash says
.................................................. .........................
Invalid Flash Mode (S)
10.98(*) (sha-2e68372, 2012-11-17 23:33:08)
eMMC Info: Size 8GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Partition (Boot) Security Version Downgraded
Fastboot Reason: Boot Failure
.................................................. .........................
Click to expand...
Click to collapse
You are flashing a downgraded version of the boot image. If you came from 4.1.1 and are now trying to flash a 4.0.4 boot image, it will fail. Try to flash the package in my last post
lucasantarella said:
I just realized that your system image says ".ext4" Fastboot does not normally format a partition as ext4 by default, maybe never at all. Make sure you have the correct Fastboot files.
Best of luck!
---------- Post added at 10:40 AM ---------- Previous post was at 10:31 AM ----------
Just to try, flash this Fastboot package with RSD Lite 6.1. I have a feeling this will work.
Package: http://sbfdownload.droid-developers..._FFW-20-27-release-keys-ATT-US_BuildA.xml.zip
** I take no responsibility for any damage done to your phone. **
---------- Post added at 10:49 AM ---------- Previous post was at 10:40 AM ----------
The reason I believe my blast post will work is because your error while trying to flash says
You are flashing a downgraded version of the boot image. If you came from 4.1.1 and are now trying to flash a 4.0.4 boot image, it will fail. Try to flash the package in my last post
Click to expand...
Click to collapse
Hi mate, many thanks! I would try your way of flashing, I'm nothing to loose in this point...let's see what happens now and I tell you later, thanks again for your answer
Aingaran said:
Try using fastboot binaries from skeevy 's thread..
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
It doesn`t works in this case...flashing with snapdragon's fastboot :crying:
Did my RSD method work? Have you attempted it yet?
Sent from my Atrix HD
Hello
I have the same problem...
The bootloader is locked, the phone not rooted. I try to flash with RSD lite and Mexico Retail rom, but RSD give an error.
And the message is:
Partition (Boot) Security Version Downgraded
Fastboot Reason: Boot Failure
Thank your for help!
First try and get to stock. Then get Mexican retail.
Sent from my GT-P3110 using xda app-developers app
lucasantarella said:
First try and get to stock. Then get Mexican retail.
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
When I try go back to stock, the phone (and RSD) get a message:
"downgraded security version
update gpt_main version failed
preflash validation failed for GPT"
RSD:
"Failed flashing process. 1/23 flash partition "gpt_main0.bin" -> Phone returned FAIL.
tomchy said:
When I try go back to stock, the phone (and RSD) get a message:
"downgraded security version
update gpt_main version failed
preflash validation failed for GPT"
RSD:
"Failed flashing process. 1/23 flash partition "gpt_main0.bin" -> Phone returned FAIL.
Click to expand...
Click to collapse
Make sure you are using the 4.1.1 fastboot package for RSD Lite. Also make sure you are using RSD Lite 6.1.
tomchy said:
When I try go back to stock, the phone (and RSD) get a message:
"downgraded security version
update gpt_main version failed
preflash validation failed for GPT"
RSD:
"Failed flashing process. 1/23 flash partition "gpt_main0.bin" -> Phone returned FAIL.
Click to expand...
Click to collapse
Unzip the rom zip and open .xml file and remove the line having flash partition gpt_main0.bin and save it, zip again using red, you will be able to flash now..
I tried to go back to Stock with factory images from Motorola Unlocked. When i try fastboot flash partition gpt.bin it shows Preflash Validation Failed and Failed to erase partition error. I cannot even go into recovery I am stuck anyone please help!.
I am getting Failed to erase partition error when i try to flash anything!.
vignesh245 said:
I tried to go back to Stock with factory images from Motorola Unlocked. When i try fastboot flash partition gpt.bin it shows Preflash Validation Failed and Failed to erase partition error. I cannot even go into recovery I am stuck anyone please help!.
I am getting Failed to erase partition error when i try to flash anything!.
Click to expand...
Click to collapse
If you are in bootloader mode you should be able to get into recovery. Just hit volume down to scroll to recovery and then volume up to select recovery.
---------- Post added at 06:41 PM ---------- Previous post was at 06:40 PM ----------
vignesh245 said:
I tried to go back to Stock with factory images from Motorola Unlocked.
Click to expand...
Click to collapse
Just remember - you cannot downgrade the bootloader or the partition table!!
JulesJam said:
If you are in bootloader mode you should be able to get into recovery. Just hit volume down to scroll to recovery and then volume up to select recovery.
---------- Post added at 06:41 PM ---------- Previous post was at 06:40 PM ----------
Just remember - you cannot downgrade the bootloader or the partition table!!
Click to expand...
Click to collapse
It's not going into recovery or rebooting the only thing I see is the fastboot menu!! What ever I do to flash it says failed to erase partition!! can you tell me why this error in fastboot!
vignesh245 said:
It's not going into recovery or rebooting the only thing I see is the fastboot menu!! What ever I do to flash it says failed to erase partition!! can you tell me why this error in fastboot!
Click to expand...
Click to collapse
What should I do now!! to get my phone back working!
vignesh245 said:
It's not going into recovery or rebooting the only thing I see is the fastboot menu!! What ever I do to flash it says failed to erase partition!! can you tell me why this error in fastboot!
Click to expand...
Click to collapse
well the last guy who got that error had to format his data partition but he had an unlocked bootloader with TWRP and could get into TWRP.
What happens when you connect your phone in bootloader mode to your PC, open a command shell and type:
fastboot devices
Does it return your device's serial number?
---------- Post added at 07:16 PM ---------- Previous post was at 07:15 PM ----------
vignesh245 said:
What should I do now!! to get my phone back working!
Click to expand...
Click to collapse
You should not be trying to flash a lower version of the partition table!!!!
You may have to do a factory reset.
---------- Post added at 07:18 PM ---------- Previous post was at 07:16 PM ----------
vignesh245 said:
I tried to go back to Stock with factory images from Motorola Unlocked. When i try fastboot flash partition gpt.bin it shows Preflash Validation Failed and Failed to erase partition error.
Click to expand...
Click to collapse
gpt.bin is the partition table. If you were trying to flash a lower version partition table than your bootloader version, you cannot do that!!!
What is your bootloader version?
JulesJam said:
well the last guy who got that error had to format his data partition but he had an unlocked bootloader with TWRP and could get into TWRP.
What happens when you connect your phone in bootloader mode to your PC, open a command shell and type:
fastboot devices
Does it return your device's serial number?
---------- Post added at 07:16 PM ---------- Previous post was at 07:15 PM ----------
You should not be trying to flash a lower version of the partition table!!!!
You may have to do a factory reset.
Click to expand...
Click to collapse
Thanks for the reply!!
Yes it returns a Serial number in fastboot! How flash the correct partition?.
vignesh245 said:
Thanks for the reply!!
Yes it returns a Serial number in fastboot! How flash the correct partition?.
Click to expand...
Click to collapse
Is Motorola Device Manager installed on your computer? If not, install it:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Then connect your phone in fastboot mode to your computer and run MDM and see if MDM can repair your phone.
Also - are you using version 2 of mfastboot to flash?
vignesh245 said:
Thanks for the reply!!
Yes it returns a Serial number in fastboot! How flash the correct partition?.
Click to expand...
Click to collapse
its 60.11
vignesh245 said:
its 60.11
Click to expand...
Click to collapse
I am using normal fastboot ! and I have MDM install will try to repair using MDM !!
vignesh245 said:
its 60.11
Click to expand...
Click to collapse
That is the lollipop 5.0 bootloader. What version of stock were you trying to flash? Kit Kat 4.4.4? If so, that is what happened here - you tried to downgrade the partition table. You cannot downgrade the partition table once you upgrade the bootloader.
---------- Post added at 07:41 PM ---------- Previous post was at 07:40 PM ----------
vignesh245 said:
I am using normal fastboot ! and I have MDM install will try to repair using MDM !!
Click to expand...
Click to collapse
OK let me know how it goes.
JulesJam said:
That is the lollipop 5.0 bootloader. What version of stock were you trying to flash? Kit Kat 4.4.4? If so, that is what happened here - you tried to downgrade the partition table. You cannot downgrade the partition table once you upgrade the bootloader.
---------- Post added at 07:41 PM ---------- Previous post was at 07:40 PM ----------
OK let me know how it goes.
Click to expand...
Click to collapse
Thanks for the clarity in reply!!
Where can i get the stock rom and Files for lolipop 5.0 ?? So I can get back to my stock recovery!
vignesh245 said:
Thanks for the clarity in reply!!
Where can i get the stock rom and Files for lolipop 5.0 ?? So I can get back to my stock recovery!
Click to expand...
Click to collapse
Did MDM not fix your phone? Are you on the XT1095?
http://www.graffixnyc.com/motox.php#
Also, I don't know what build you are, there looks to be more than 1 build for 5.0. Check out the support thread that the link above links too.
JulesJam said:
Did MDM not fix your phone? Are you on the XT1095?
http://www.graffixnyc.com/motox.php#
Also, I don't know what build you are, there looks to be more than 1 build for 5.0. Check out the support thread that the link above links too.
Click to expand...
Click to collapse
MDM did not fix my phone yes I am on Xt1095.
Thanks will try it and let you know
vignesh245 said:
MDM did not fix my phone yes I am on Xt1095.
Click to expand...
Click to collapse
OK, it is probably the custom recovery.
JulesJam said:
OK, it is probably the custom recovery.
Click to expand...
Click to collapse
I am getting Preflash validation failed and I found I have 22.21.11 version installed using MDM. and it says in pink color error in phone as failed to downgrade primary_apt.
Can you help me with this now??
vignesh245 said:
I am getting Preflash validation failed and I found I have 22.21.11 version installed using MDM. and it says in pink color error in phone as failed to downgrade primary_apt.
Can you help me with this now??
Click to expand...
Click to collapse
I would not mess around with the partition table. See if you can do
fastboot format data
fastboot format cache
To wipe your data and cache partitions.
JulesJam said:
I would not mess around with the partition table. See if you can do
fastboot format data
fastboot format cache
To wipe your data and cache partitions.
Click to expand...
Click to collapse
I cannot do that it says the error as in the attached screenshot!
When I select recovery using volume up it says ||boot up failed||
Can Motorola help my situation Mine is a pure edition?
||version downgraded for primary_gpt||
vignesh245 said:
Can Motorola help my situation Mine is a pure edition?|
Click to expand...
Click to collapse
Yes. It is still under warranty. I would get a warranty replacement. If you can't flash anything in BL mode and can't get into recovery and MDM can't repair your phone, idk what else to do.
Motorola should let everyone who unlocks their bootloader know you can't downgrade the bootloader or partition table. They should release the factory images of every version of Android for a device and let people know they have to stick to the version for their bootloader
Quite frankly, this is Motorola's fault for not doing that.
JulesJam said:
Yes. It is still under warranty. I would get a warranty replacement. If you can't flash anything in BL mode and can't get into recovery and MDM can't repair your phone, idk what else to do.
Motorola should let everyone who unlocks their bootloader know you can't downgrade the bootloader or partition table. They should release the factory images of every version of Android for a device and let people know they have to stick to the version for their bootloader
Quite frankly, this is Motorola's fault for not doing that.
Click to expand...
Click to collapse
Thanks a lot will contact motorola get my device replaced !.
vignesh245 said:
I cannot do that it says the error as in the attached screenshot!
When I select recovery using volume up it says ||boot up failed||
Can Motorola help my situation Mine is a pure edition?
||version downgraded for primary_gpt||
Click to expand...
Click to collapse
try using the "erase" command instead of format, I've found on my PC format works, but on Mac I need to use erase.
Hello friends!
After i tried to find a way to bypass LeEco login on the install of stock based ROM , i have bricked my phone (not really bricked, but i will tell you). On the first boot i cant complete the setup, because X527 dont detect my sim cards and shows no wifi networks (So i cant go to developer options and can not use a dial code).
After i have read a lot, im sure it was a problem with the efs or nvram (The last working boot shows no serial and no bootloader). But now im on Stock ROM and Stock Recovery and need an option to repair efs/nvram over fastboot or stock recovery, without changing anything in the phone itself.
Hope you guys can help me...
i recommend you to install twrp and flash official stock rom it has stock recovery too so it will came back to original state. we have the original stock rom here so dont afraid to install twrp.
anjel05 said:
i recommend you to install twrp and flash official stock rom it has stock recovery too so it will came back to original state. we have the original stock rom here so dont afraid to install twrp.
Click to expand...
Click to collapse
I can't install TWRP because i have to go to the developer options, but my phone can not start....
quasimodo88 said:
I can't install TWRP because i have to go to the developer options, but my phone can not start....
Click to expand...
Click to collapse
What you need in developers option? Oem unlocking and usb debugging? I thnk in our device theyre already on default
anjel05 said:
What you need in developers option? Oem unlocking and usb debugging? I thnk in our device theyre already on default
Click to expand...
Click to collapse
Yes. If i want to install twrp in fastboot mode i get this error:
PS C:\adb> fastboot flash recovery twrp-3.1.1-1-s2.img
target reported max download size of 536870912 bytes
sending 'recovery' (17244 KB)...
OKAY [ 0.562s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.578s
quasimodo88 said:
Yes. If i want to install twrp in fastboot mode i get this error:
PS C:\adb> fastboot flash recovery twrp-3.1.1-1-s2.img
target reported max download size of 536870912 bytes
sending 'recovery' (17244 KB)...
OKAY [ 0.562s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.578s
Click to expand...
Click to collapse
You have to do
U need to unlock first dude
DarknessKiller said:
You have to do
U need to unlock first dude
Click to expand...
Click to collapse
Yes i know bro. But if i try to unlock i get this message:
PS C:\adb> fastboot oem unlock-go
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.016s
quasimodo88 said:
Yes i know bro. But if i try to unlock i get this message:
PS C:\adb> fastboot oem unlock-go
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.016s
Click to expand...
Click to collapse
Did you install the drivers you need?
anjel05 said:
Did you install the drivers you need?
Click to expand...
Click to collapse
Yes i did. My phone is shown under fastboot devices.
quasimodo88 said:
Yes i know bro. But if i try to unlock i get this message:
PS C:\adb> fastboot oem unlock-go
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.016s
Click to expand...
Click to collapse
I think you are ****ed. Why oh why didn't you enable oem unlocking b4 flashing roms?
You can try
Fastboot erase modemst1
Fastboot erase modemst2
But it probably won't work cus your bootloader is locked
You can also try
Fastboot boot <insert name of your twrp img here>
But again doubt it'll work
---------- Post added at 08:31 PM ---------- Previous post was at 08:29 PM ----------
Try googling for an alternative way to unlock your bootloader
---------- Post added at 08:40 PM ---------- Previous post was at 08:31 PM ----------
Also if you can find a way to transfer files to your phone, try downloading eui 19s rom, edit the update script as needed(especially if you are downgrading), then send it to your phone /sdcard as update.zip and try to flash it through stock recovery.
Dudeonyx said:
I think you are ****ed. Why oh why didn't you enable oem unlocking b4 flashing roms?
You can try
Fastboot erase modemst1
Fastboot erase modemst2
But it probably won't work cus your bootloader is locked
You can also try
Fastboot boot <insert name of your twrp img here>
But again doubt it'll work
---------- Post added at 08:31 PM ---------- Previous post was at 08:29 PM ----------
Try googling for an alternative way to unlock your bootloader
---------- Post added at 08:40 PM ---------- Previous post was at 08:31 PM ----------
Also if you can find a way to transfer files to your phone, try downloading eui 19s rom, edit the update script as needed(especially if you are downgrading), then send it to your phone /sdcard as update.zip and try to flash it through stock recovery.
Click to expand...
Click to collapse
Fastboot erase... and fastboot boot... i have already tried.
Fastboot sideload... i have tried too, but im not sure if i do it right. I think my last chance is to try it over an otg cable, right?
quasimodo88 said:
Fastboot erase... and fastboot boot... i have already tried.
Fastboot sideload... i have tried too, but im not sure if i do it right. I think my last chance is to try it over an otg cable, right?
Click to expand...
Click to collapse
Any luck on googling a way to enable oem unlocking without access to developer options?
Or you can treat your phone as if it was bricked. Try downloading the sparse or Qfil file (not sure which is used for unbricking) for your model. And flashing through flashone or Qfil. Google or search xda for steps on how to unbrick this particular phone or Qualcomm phones in general. I believe it involves a step where you hold vol+, vol- & power key.
Anyway goodluck.
Dudeonyx said:
Any luck on googling a way to enable oem unlocking without access to developer options?
Or you can treat your phone as if it was bricked. Try downloading the sparse or Qfil file (not sure which is used for unbricking) for your model. And flashing through flashone or Qfil. Google or search xda for steps on how to unbrick this particular phone or Qualcomm phones in general. I believe it involves a step where you hold vol+, vol- & power key.
Anyway goodluck.
Click to expand...
Click to collapse
I dont find a way to unlock the bootloader. Flashing the qfil i have already tried, but it doesnt repair the issue. I think efs or nvram is broken.
quasimodo88 said:
I dont find a way to unlock the bootloader. Flashing the qfil i have already tried, but it doesnt repair the issue. I think efs or nvram is broken.
Click to expand...
Click to collapse
What version did you flash with Qfil? 19s usually doesn't ask for leeco login so try that. If you can bypass the leeco login I can walk you through the steps to repair your efs, I even have qcn files for x526 and x522 you can edit to fix it.
Don't know if these three options are possible, because I'm not sure what the qfil files contain but
1. with your current qfil if you can find a way to delete the letvaccount apk from the system image and reflash, that should bypass the login issues. Though dm verify might prevent the phone from booting past the splash screen, so you'll need to replace the kernel(boot) img with any custom one like illusion or overload
2. replace the system, data and kernel(boot) image with ones from miui 9 rom. This will flash miui instead and voila, no login issue
3. Replace Qfil recovery image with renamed twrp
Dudeonyx said:
What version did you flash with Qfil? 19s usually doesn't ask for leeco login so try that. If you can bypass the leeco login I can walk you through the steps to repair your efs, I even have qcn files for x526 and x522 you can edit to fix it.
Don't know if these three options are possible, because I'm not sure what the qfil files contain but
1. with your current qfil if you can find a way to delete the letvaccount apk from the system image and reflash, that should bypass the login issues. Though dm verify might prevent the phone from booting past the splash screen, so you'll need to replace the kernel(boot) img with any custom one like illusion or overload
2. replace the system, data and kernel(boot) image with ones from miui 9 rom. This will flash miui instead and voila, no login issue
3. Replace Qfil recovery image with renamed twrp
Click to expand...
Click to collapse
Thank's dude, that sounds good! I have to bypass the leeco setup, what i have to do? Can you give me an instruction, please? You can find the file on this site:
http://www.gsmhelpful.com/2017/08/how-to-flash-letv-le-2-x526-with-qfil-flash-tool.html
quasimodo88 said:
Thank's dude, that sounds good! I have to bypass the leeco setup, what i have to do? Can you give me an instruction, please? You can find the file on this site:
http://www.gsmhelpful.com/2017/08/how-to-flash-letv-le-2-x526-with-qfil-flash-tool.html
Click to expand...
Click to collapse
Have you flashed this? If so did it remove the leeco login or at least make it skipable?
Send a pic of the login screen
---------- Post added at 03:28 PM ---------- Previous post was at 03:25 PM ----------
Also unzip the sparse file and send me pics of its contents. Because I can't download the file right now
Dudeonyx said:
Have you flashed this? If so did it remove the leeco login or at least make it skipable?
Send a pic of the login screen
---------- Post added at 03:28 PM ---------- Previous post was at 03:25 PM ----------
Also unzip the sparse file and send me pics of its contents. Because I can't download the file right now
Click to expand...
Click to collapse
Yes, i have install it 2 times, but same issue. Can you give me an email address for the pictures, please?
quasimodo88 said:
Yes, i have install it 2 times, but same issue. Can you give me an email address for the pictures, please?
Click to expand...
Click to collapse
I've seen the pics, the system file is in parts so replacing it is very very difficult as I cant be sure how it was split.
But good news, I noticed a file named recovery
So move that file somewhere else.
Then rename your twrp file to recovery and copy it to that folder.
Then try flashing it, if successful this should give you custom recovery and I can work with that
Dudeonyx said:
I've seen the pics, the system file is in parts so replacing it is very very difficult as I cant be sure how it was split.
But good news, I noticed a file named recovery
So move that file somewhere else.
Then rename your twrp file to recovery and copy it to that folder.
Then try flashing it, if successful this should give you custom recovery and I can work with that
Click to expand...
Click to collapse
Ok, i will try it now. Don't run away :fingers-crossed:
quasimodo88 said:
Ok, i will try it now. Don't run away :fingers-crossed:
Click to expand...
Click to collapse
Good luck, also I noticed that your issue isn't leeco account login but rather Google's factory reset protection. So if this fails you can search for ways to bypass google factory reset protection.
hello to all, accidentally delete the recovery of my smartphone and I have not been able to flash it using adb commands in Windows 10 therefore I can not restore the smartphone to the factory mode. please help
What error it gives when you type command 'fastboot flash recovery <recovery_file>'?
How did you deleted the recovery?
Also the end ("I can not restore the computer from the factory") doesn't make any sense.
keikari said:
What error it gives when you type command 'fastboot flash recovery <recovery_file>'?
How did you deleted the recovery?
Also the end ("I can not restore the computer from the factory") doesn't make any sense.
Click to expand...
Click to collapse
1. I think I deleted the recovery when I rooted the smartphone with kingroot.
2. the error that gives me is the following:
" S C:\adb> fastboot flash recovery recovery.img
target reported max download size of 524288000 bytes
sending 'recovery' (9304 KB)...
OKAY [ 0.222s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.234s ".
crhistiandavidbonilla47 said:
1. I think I deleted the recovery when I rooted the smartphone with kingroot.
2. the error that gives me is the following:
" S C:\adb> fastboot flash recovery recovery.img
target reported max download size of 524288000 bytes
sending 'recovery' (9304 KB)...
OKAY [ 0.222s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.234s ".
Click to expand...
Click to collapse
Can you still boot normally and do you have root access?
---------- Post added at 08:33 PM ---------- Previous post was at 08:29 PM ----------
Also try to re-unlock bootloader and if it doesn't work, re-lock and then unlock again. So we can be sure you don't have problems with that, because possible fix would otherwise make your phone worse.
keikari said:
Can you still boot normally and do you have root access?
---------- Post added at 08:33 PM ---------- Previous post was at 08:29 PM ----------
Also try to re-unlock bootloader and if it doesn't work, re-lock and then unlock again. So we can be sure you don't have problems with that, because possible fix would otherwise make your phone worse.
Click to expand...
Click to collapse
yes i can still boot normally, i erase kingroot so i think that i dont have root access
crhistiandavidbonilla47 said:
yes i can still boot normally, i erase kingroot so i think that i dont have root access
Click to expand...
Click to collapse
Well then your best choice is probably to try to re-install firmware and hope this does something. Do it with dload and force update method, because it doesn't use default recovery.
Or if you happen to have root access you can try this https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en or similiar app to flash recovery while device running. (Or 'dd' command)
keikari said:
Well then your best choice is probably to try to re-install firmware and hope this does something. Do it with dload and force update method, because it doesn't use default recovery.
Or if you happen to have root access you can try this https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en or similiar app to flash recovery while device running. (Or 'dd' command)
Click to expand...
Click to collapse
Nothing works
I had a similar problem: in fastboot I can install twrp successfully, but when I reboot, boot always to the stock emui recovery...
I don't know why.
I thought it was already installed twrp, I don't know why now boots to the stock one...
Does anyone can help me? Thanks.