Related
Hi,
I'm running on PAC-ROM Beta-1 Lollipop 5.1 under TWRP 2.8.6.0 on Samsung GT-I9105P.
I can't flash the .zip; I'm receiving the following error message:
Code:
[COLOR="Red"]E:Error executing updater binary in zip '/external_sd/xposed-arm-20150308.zip'[/COLOR]
I read somewhere on XDA that disabling USB debugging would help, however, to no avail in my case.
The .apk installs fine, but without the .zip it's no use.
It used to work perfectly under stock 4.2.2.
How do I get Xposed to work?
Many thanks in advance.
I'm having the same issue.
Good to see I'm not alone
(TWRP 2.8.5.4 on TF300)
I think you're trying to install Xposed for Android 5.0 on Android 5.1
You need install this;
http://forum.xda-developers.com/attachment.php?attachmentid=3245467&d=1428192863
forumber2 said:
I think you're trying to install Xposed for Android 5.0 on Android 5.1
You need install this;
http://forum.xda-developers.com/attachment.php?attachmentid=3245467&d=1428192863
Click to expand...
Click to collapse
Thanks for trying, however after installing and activating modules, when trying to reboot I end up being stuck in a bootloop.
With my Moto X (Ghost) XT1052 I have strange problems installing custom ROMs and root.
TWRP
If using the latest stable TWRP 2.8.7.0 and trying to install CM13 I get an error message like this:
Code:
This package is for device: xt1052,ghost,xt1053,ghost_retail,xt1055,ghost_usc, xt1056,ghost_sprint,xt1058,ghost_att,ghost_rcica,x t1060,ghost_verizon; this device is )".
There is a thread about making changes to the updater-script to get around this problem which did not solve the problem for me, and I don't see it as a permanent solution.
What did work was to install an older version, specifically TWRP 2.6.3.1.
Question: Is there a solution to this problem with a specific current build of TWRP or have ro.product.device permanently set?
SuperSU
After flashing the latest SuperSU from TWRP and rebooted, the device just hangs on the boot logo and does not pass.
Using the much older SuperSU 2.63 works without a problem.
Question: Is there any solution to get the latest SuperSU installed?
gotling said:
With my Moto X (Ghost) XT1052 I have strange problems installing custom ROMs and root.
TWRP
If using the latest stable TWRP 2.8.7.0 and trying to install CM13 I get an error message like this:
Code:
This package is for device: xt1052,ghost,xt1053,ghost_retail,xt1055,ghost_usc, xt1056,ghost_sprint,xt1058,ghost_att,ghost_rcica,x t1060,ghost_verizon; this device is )".
There is a thread about making changes to the updater-script to get around this problem which did not solve the problem for me, and I don't see it as a permanent solution.
What did work was to install an older version, specifically TWRP 2.6.3.1.
Question: Is there a solution to this problem with a specific current build of TWRP or have ro.product.device permanently set?
Click to expand...
Click to collapse
Mate, I installed the unofficial TWRP from the post below, it worked fine in my moto X (XT1058). Try flash the TWRP 3.0.2 via fastboot (using computer).
https://forum.xda-developers.com/moto-x/development/twrp-touch-recovery-unofficial-t3309449
Try to verify the downloaded archives, because they may contain errors and a re download is needed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is only for Huawei P9 Lite (VNS)
Code:
OpenKirin presents unofficial TWRP for stock EMUI 5.x with decryption support.
Intended for usage on stock emui 5.x in combination with unlocked bootloader and
modded boot image with disabled dm-verity (depending on what you want to do).
Code:
[COLOR="red"][B]WARNING:[/B] since 3.1.0-2 update we've enabled image flashing to special partitions -
not just /recovery or /boot partition.
That means your device could be bricked in a few seconds if you do not pay attention
or don't know what you're doing. (Noobs please stay away out of this section!)[/COLOR]
Installation Instructions
Code:
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.1-0-venus.img
3. reboot to recovery!
Rooting Methods
Code:
[B][U]1. Official SuperSU (not just 2.82+)[/U][/B]
1. Ensure you are running emui 5.x stock kernel
2. Tick the option "Keep vendor partition mounted" inside OpenKirin Settings
3. download and install [URL="www.supersu.com/download"]official SuperSU[/URL]
4. Enjoy!
[B][U]2. Custom SuperSU[/U][/B]
1. Make sure the device running stock EMUI 5.x boot.img
2. flash this modded SuperSU 2.79: [URL="https://drive.google.com/open?id=0BxWP2gF_0Bd_UmQ2Zm9ZRGxBTUE"]download here[/URL]
3. enjoy root :)
[COLOR="red"][B]NOTE:[/B][/COLOR] this is for every device (except kirin 960 based) running emui 5.x without loop support.
[B][U]3. Magisk[/U][/B]
1. ensure you are running a emui 5.x stock kernel
2. flash magisk
3. enjoy root & safetynet (read note)
[B][COLOR="red"]NOTE:[/COLOR][/B] Magisk Hide is a known problem on Huawei/Honor devices.
Make sure you are not rebooting/turning off your device with Magisk Hide enabled!
You may face a broken fingerprint scanner, do not worry,
simply disable magisk hide and reboot - fps works again!
Downloads
Code:
[LIST]
[URL="https://github.com/OpenKirin/android_device_huawei_venus/releases/download/3.1.1-0/twrp-3.1.1-0-venus.img"][U]download twrp-3.1.1-0-venus.img[/U][/URL]
[/LIST]
FAQ
Code:
Q: What's the code status?
A: 10. June 2017
Q: which P9 Lite models are supported?
A: every model should be supported.
Q: Can i use this TWRP with decrypted /data?
yes, you can! (have a look at the instructions in FAQ)
Q: Can i install LOS or AOSP based roms with this TWRP?
yes, you can! (please follow the installing procedure in the corresponding rom thread)
Q: Can i install Magisk?
A: Since 3.1.1-0 you are able to flash Magisk through TWRP (recovery kernel has been updated)
Q: Does official SuperSU work?
A: Yes, even though chainfire included a fix in his upcomming version,
you can use every version of it, just check the "Rooting Instructions" section.
Q: ETAs?
A: No.
Going back from decrypted -> encrypted?
Code:
1. Format /data inside of TWRP
2. Flash eRecovery & Kernel from your currently installed Stock ROM Build
3. Do a factory reset inside of eRecovery
5. Let device boot up
6. Install your current firmware hw_data package & SuperSU using TWRP again
Want to decrypt? No problem.
Code:
1. Format /data inside of TWRP
2. Flash a kernel with forceencrypt disabled
3. bootup your device
Special Thanks
Code:
* [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=220328"]paulobrien[/URL]
XDA:DevDB Information
TWRP, Tool/Utility for the Huawei P9 Lite
Contributors
OldDroid, surdu_petru, XePeleato
Source Code: https://github.com/OpenKirin/android_device_huawei_hi6250
Version Information
Status: Stable
Created 2017-04-12
Last Updated 2017-06-11
Reserved
Changelog
Code:
[B]TWRP 3.1.0-2[/B]
* Add support for NTFS formatted MicroSD crads or OTG drives
* Enabled direct image flashing to special partitions
(be careful when using it - one wrong klick means brick in a second!)
* TWRP is now compatible with AOSP based ROMS (LineageOS)
and decrypted Stock ROMS, transition from Stock to LOS is possible (encrypted -> decrypted).
* Correct versioning - Device version is now comming from the common base.
* 6250-common: switch to common base to ensure full support
[strike][B]TWRP 3.1.0-1[/B]
(never released)[/strike]
[B]TWRP 3.1.0-0[/B]
* initial release
??
I have not tested with recovery twrp here, i have tested it with recovery revolution rc3 of (badwolf). THANK YOU...
Your supersu 2.79 works apparently correctly..merci ..
Have anyone tested this TWRP yet?
pospi69 said:
Have anyone tested this TWRP yet?
Click to expand...
Click to collapse
yes i tested it and it is fully working
Starting with TWRP recovery will be possible to switch to this recovery with the install command?
Thank you
nigol
OldDroid said:
Code:
OpenKirin presents unofficial TWRP for stock EMUI 5.x with decryption support.
Intended for usage on stock emui 5.x in combination with unlocked bootloader and
modded boot image with disabled dm-verity (depending on what you want to do).
Instructions
Code:
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.0-0-hi6250.img
3. reboot to recovery!
Rooting - Special SuperSU
Code:
1. Make sure the device running stock EMUI 5.x boot.img
2. flash this modded SuperSU 2.79: [URL="https://drive.google.com/open?id=0BxWP2gF_0Bd_UmQ2Zm9ZRGxBTUE"]download here[/URL]
3. enjoy root :)
[COLOR="red"][B]NOTE:[/B][/COLOR] this is for every device running emui 5.x without loop support.
Downloads
Code:
[LIST]
[URL="https://github.com/OpenKirin/android_device_huawei_hi6250/releases/download/3.1.0-0/twrp-3.1.0-0-hi6250.img"][U]download twrp-3.1.0-0-hi6250.img[/U][/URL]
[/LIST]
FAQ
Code:
Q: What's the code status?
A: 12. April 2017
Q: anything special in your recovery?
A: yes, it is made for huawei phones and excludes important directories during wiping/factory reset
(like data/hw_init for example)
Q: which P9 Lite models are supported?
A: every model should be supported.
Q: ETAs?
A: No.
Special Thanks
Code:
* [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=220328"]paulobrien[/URL]
XDA:DevDB Information
TWRP, Tool/Utility for the Huawei P9 Lite
Contributors
OldDroid, surdu_petru, XePeleato
Source Code: https://github.com/OpenKirin/android_device_huawei_hi6250
Version Information
Status: Stable
Created 2017-04-12
Last Updated 2017-04-12
Click to expand...
Click to collapse
Is it possible to install xposed with this twrp?
maka1105 said:
Is it possible to install xposed with this twrp?
Click to expand...
Click to collapse
There is no Xposed for nougat -,-
pospi69 said:
Have anyone tested this TWRP yet?
Click to expand...
Click to collapse
we never release untested stuff to the public.
nigol said:
Starting with TWRP recovery will be possible to switch to this recovery with the install command?
Thank you
nigol
Click to expand...
Click to collapse
simply flash it via fastboot or from inside twrp (install image method - select recovery partition)
maka1105 said:
Is it possible to install xposed with this twrp?
Click to expand...
Click to collapse
as simo already told you, since when do we have xposed for nougat? Uhh, little addition, please, never quote op :|
I'm using Elite Kernel, is this still usable with a non stock kernel?
zgomot said:
I'm using Elite Kernel, is this still usable with a non stock kernel?
Click to expand...
Click to collapse
depends if it forces decryption or not ..
the recovery won't work on devices without encryption for now (wip, almost ready).
EDIT: just checked, it is compatible with this recovery
OldDroid said:
depends if it forces decryption or not ..
the recovery won't work on devices without encryption for now (wip, almost ready).
EDIT: just checked, it is compatible with this recovery
Click to expand...
Click to collapse
Hello,
I flashed with this recovery and it works well. Btw I tried to root the device (by using provided SuperSu, I flashed it and installed supersu app) but it didn't succeed. The supersu app says it need to update su binary and when continue, the app freezes. Previously I used revolution recovery rc2 with elite kernel v4. Any solution?
Thank you.
P.s.: My device is VNS-L31C636 and I'm using Android 7.0 with EMUI 5.0
eagletdw said:
Hello,
I flashed with this recovery and it works well. Btw I tried to root the device (by using provided SuperSu, I flashed it and installed supersu app) but it didn't succeed. The supersu app says it need to update su binary and when continue, the app freezes. Previously I used revolution recovery rc2 with elite kernel v4. Any solution?
Thank you.
P.s.: My device is VNS-L31C636 and I'm using Android 7.0 with EMUI 5.0
Click to expand...
Click to collapse
rooting method provided only works with stock kernel as elite kernel is pre-patched!
titanium app not restoring any app..... tried with both mount namesapce options,,, same issue which i got in porting phh superuser and same happen with me on v1 build,,,
HassanMirza01 said:
titanium app not restoring any app..... tried with both mount namesapce options,,, same issue which i got in porting phh superuser and same happen with me on v1 build,,,
Click to expand...
Click to collapse
nope, i just checked it, works fine with BusyBox installed. Check "Control Center" - justed backed it up and restored it.
How i can flash SuperSU? i download your files but i do not know how to install this. In twrp i cant see this file :/
Ah :laugh:
Will try to adjust it as i also have working busybox installed by stericson....
Mareczin said:
How i can flash SuperSU? i download your files but i do not know how to install this. In twrp i cant see this file :/
Click to expand...
Click to collapse
You have to change the extension, change .0 to . zip
How's backup in this recovery?
Because when i backed up using revolution recovery, then tried to restore it i lose many apps and functionalities
example: the phone doesn't produce any sound
fm radio app not found
and many more
if someone tried it i want to know
Here you can find several patched boot.img files for various stock rom system versions of Redmi 7A.
https://www.mediafire.com/folder/zx0167qqaknc3/Redmi_7a_patched_boot
Note: The one for xiaomi.eu is custom rom, not stock EU.
If you can't find a patched boot.img for your version, you can also patch it yourself with this tool:
http://www.mediafire.com/file/c5e0idf6cy5ap25/patcher.7z/file
(follow instructions in readme file; credits to Russian 4pda forum)
Where i can find xiaomi.eu ROM for this device?
NV-Dev said:
Where i can find xiaomi.eu ROM for this device?
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=4349826312261652844
Can you please upload patched boot for 11.0.2 indian rom???
Can you make a patched boot for the Mokee rom because when I try to patch it with the patcher it has ramdisk error. Can you help me?
anonymousfun122 said:
Can you make a patched boot for the Mokee rom because when I try to patch it with the patcher it has ramdisk error. Can you help me?
Click to expand...
Click to collapse
Here for you
Mokee_boot.img
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not working for me
Auto Reboot to recovery
It worked
sjcbank said:
Here for you
Mokee_boot.img
Click to expand...
Click to collapse
Thank you so much !!! It worked instantly . I was trying weeks to make magisk working on the mokee rom.
Thank you !!
Hey,
I have MIUI v10.2.6.0.PCMINXM(Indian version), actually I downgraded to this version. Please help me install Mokee on my device. Enlist all the steps I need to take from scratch.
Your prompt response would be really appreciated.
Tenome7 said:
Hey,
I have MIUI v10.2.6.0.PCMINXM(Indian version), actually I downgraded to this version. Please help me install Mokee on my device. Enlist all the steps I need to take from scratch.
Your prompt response would be really appreciated.
Click to expand...
Click to collapse
Any rom version can install mokee. It's very easy, anyone can do it.
I am 60 years old, I am Vietnamese, I do not know English, all instructions are available online, I use Google, Google Chrome and Google translate.
sjcbank said:
Any rom version can install mokee. It's very easy, anyone can do it.
I am 60 years old, I am Vietnamese, I do not know English, all instructions are available online, I use Google, Google Chrome and Google translate.
Click to expand...
Click to collapse
I've been toying around with Android since it's Lollipop versions, rooting them, intalling custom ROMs etc. Probably 6 years. More than 7 devices.
As far as installing a custom ROM on this phone (Redmi 7A) is concerned, the different versions, like Indian, Global have different drivers or HAL's.
So, after successfully booting up into MOKEE OS on my variant 3-4 times, Torch, Audio, Video, Calls...... Nothing worked.
And to be very honest, there was nothing mentioned about this in MOKEE OS thread, as to which version of this device is not compatible with the ROM. The only reason I messed up was because the introduction of GSI ROMs has made the custom ROM creation process easier, but introduced a ****load of work in some devices, and ending up causing trouble.
This was the reason I requested all the steps in the thread so I could verify if I was missing some important step as far as the Indian variant is considered.
But thanks to everyone, I successfully booted Mokee ROM with everything working on my variant, including superuser privileges.
Also I messed up partitions in TWRP, and ended up with only 22gigs of Internal storage available, lol.
Thanks.
Tried @Tenome7 patched boot file for latest nightlly mokee OS 10, it bootloops, patched my own boot file, it still boot loops.
It seems impossible to get magisk working in mokee OS.
Ok I figured it out, AFTER you flash the patched boot.img you need to format the data partition, you'll loose all your data, however the ROM will boot.
I'm running Android 10 mokee os, more stable and no bugs compared to lineage os 17 rom
cg730620 said:
Here you can find several patched boot.img files for various stock rom system versions of Redmi 7A.
Click to expand...
Click to collapse
Hi
Do you have a patched boot.img for my 7A 11.0.18.0 (PCMEUXM) ?
Thanks
axy_david said:
Tried @Tenome7 patched boot file for latest nightlly mokee OS 10, it bootloops, patched my own boot file, it still boot loops.
It seems impossible to get magisk working in mokee OS.
Click to expand...
Click to collapse
Sorry for being so late to reply here. I would suggest using MIUI v10.2.10.0 as the base over which the Mokee OS needs to be installed.
As far as root is concerned, I tried Magisk but it gave me bootloops every time. As an alternative to getting root, I flashed the AddonSU installer which I downloaded from the Mokee Official site. You would just need to find it on the website.
I hope this helps. If you have further doubts, I'll stay a bit more active here. :fingers-crossed:
I want to unroot, but when i choose restore images in magisk manager it says stock backup doesnt exist. I downloaded the patched boot and stock boot.img prior to rooting, i didnt use magisk to patch the stock boot. What do i do now, i want to unroot and install ota on my xiaomi mi a3.
Can anybody help me?
I need the new version of patcher and the creator's website doesn't load me correctly.
Anyone have got pine 11.0.7 global patched boot image??? Cz yaalex patcher is down showing internal error
redmi7a
Hi
carried out
bootfromrecovery.bat - Reboot to recovery, connect to PC, install adb driver and run this file. this will extract boot.img from running phone, patch it on the fly and flash back patched boot.img
..but it didn't happen
* Requires internet connection. (it downloads latest Magisk release during process)
..I still don't have root
someone will help
Thank you
I asked the developer about a similar issue with the downloadable patcher, and he suggested me to try with the online one, which is more up to date.
https://patcher.yaalex.xyz/
romam suchanek said:
Hi
carried out
bootfromrecovery.bat - Reboot to recovery, connect to PC, install adb driver and run this file. this will extract boot.img from running phone, patch it on the fly and flash back patched boot.img
..but it didn't happen
* Requires internet connection. (it downloads latest Magisk release during process)
..I still don't have root
someone will help
Thank you
Click to expand...
Click to collapse
I have tried many .img but impossible to boot twrp in this device. I tried in nougat and mm but after flashing it, it doesnt boot, normal SO boots instead.
Currently compilation number: EVA-L09C90B180
EMUI 4.1.1 Android MM
Any help? Which version of twrp am I supposed to install?
juanlc18 said:
I have tried many .img but impossible to boot twrp in this device. I tried in nougat and mm but after flashing it, it doesnt boot, normal SO boots instead.
Currently compilation number: EVA-L09C90B180
EMUI 4.1.1 Android MM
Any help? Which version of twrp am I supposed to install?
Click to expand...
Click to collapse
You must use a specific/old TWRP for P9, for A6:
P9-EVA-TWRP-Android-6.img | by Tecalote for P9
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com