Bricked LG G2 VZW? - Verizon LG G2

hey guys
i had a working lg g2 vzw running xdabbeb's 2.5 rom
i wanted to upgrade to his vs982.5 v1.1 but i was running 26a so i decided to flash 27a bootstack
however, I BRICKED!
everytime i boot, i get this http://imgur.com/NwrZIyg,vLAACcX
and when I boot into download mode, i get this! http://imgur.com/NwrZIyg,vLAACcX
so if i cant get into download mode, I can't use the KDZ method with lg flash tool, correct?
any guidance would be great
thanks!

Nblufire12 said:
hey guys
i had a working lg g2 vzw running xdabbeb's 2.5 rom
i wanted to upgrade to his vs982.5 v1.1 but i was running 26a so i decided to flash 27a bootstack
however, I BRICKED!
everytime i boot, i get this http://imgur.com/NwrZIyg,vLAACcX
and when I boot into download mode, i get this! http://imgur.com/NwrZIyg,vLAACcX
so if i cant get into download mode, I can't use the KDZ method with lg flash tool, correct?
any guidance would be great
thanks!
Click to expand...
Click to collapse
You're not bricked, you just flashed an older 27A bootstack, or some other bootstack that wipes your laf partition...this means download mode will not work.
Go to xdabbeb's resources page, and download the 27A bootstack from there, and flash it in twrp; this will give you download mode back: http://forum.xda-developers.com/ver...s980-resources-bootstacks-unofficial-t3050777
You should still have twrp on your phone - if you don't know how to enter recovery with key presses, you will need to do some reading on how to do it.

bouchigo said:
You're not bricked, you just flashed an older 27A bootstack, or some other bootstack that wipes your laf partition...this means download mode will not work.
Go to xdabbeb's resources page, and download the 27A bootstack from there, and flash it in twrp; this will give you download mode back: http://forum.xda-developers.com/ver...s980-resources-bootstacks-unofficial-t3050777
You should still have twrp on your phone - if you don't know how to enter recovery with key presses, you will need to do some reading on how to do it.
Click to expand...
Click to collapse
EDIT
IM IN RECOVERY!! But everything else is dead. how do i transfer the .zip to flash if all i can do is get into recovery?
thanks

Nblufire12 said:
EDIT
IM IN RECOVERY!! But everything else is dead. how do i transfer the .zip to flash if all i can do is get into recovery?
thanks
Click to expand...
Click to collapse
There are many ways, you're going to have to research. I'm mobile right now, so I can't really help right now. If you're on blastagator's twrp 2.8.5.1 you can enable MTP in recovery, and transfer it that way.
Sent from my VS980 4G using Tapatalk

bouchigo said:
There are many ways, you're going to have to research. I'm mobile right now, so I can't really help right now. If you're on blastagator's twrp 2.8.5.1 you can enable MTP in recovery, and transfer it that way.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
you did enough... i fixed it! so awesome. i was about to restore via ubuntu it would have taken all night
thankyou!!!!

Related

Can't flash twrp 2.7 on Verizon lg g2

It is not bricking my phone it just fails to flash I'm currently on twrp 2.6.3.3
Sent from my VS980 4G using Tapatalk
spinninbsod said:
It is not bricking my phone it just fails to flash I'm currently on twrp 2.6.3.3
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Are you on 12B? I don't think the official TWRP is Loki patched for 12B. I patched one to work on both 11A and 12B if you want the link. I've read you can also just extract the recovery IMG from the zip and flash it with Flashify if you wanna try that.
Yep I'm on 12b can I have a Link plz thank you for your help
Sent from my VS980 4G using Tapatalk
spinninbsod said:
Yep I'm on 12b can I have a Link plz thank you for your help
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Here ya go https://www.dropbox.com/s/rnj9i1lsg8oc1js/Stock-TWRP2.7-VS980.zip Just flash in recovery. Reboot recovery and then it'll say TWRP 2.7
If you're interested in applying themes to TWRP, here's me promoting my thread http://forum.xda-developers.com/showthread.php?t=2665527 All work on 12B as well.
Can I flash maludus with this recovery and flash 2.6.3.3 backups on 2.7
Sent from my VS980 4G using Tapatalk
spinninbsod said:
Can I flash maludus with this recovery and flash 2.6.3.3 backups on 2.7
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
I would think so
JRJ442 said:
Are you on 12B? I don't think the official TWRP is Loki patched for 12B. I patched one to work on both 11A and 12B if you want the link. I've read you can also just extract the recovery IMG from the zip and flash it with Flashify if you wanna try that.
Click to expand...
Click to collapse
I got 2.7 by using this recovery image Flashify method about two weeks ago. I haven't had any issues and have been TWRPin as usual.
Sent from my LG-VS980 using Tapatalk
I used Flashify too and have no issues.
Sent from my VS980 4G
spinninbsod said:
Can I flash maludus with this recovery and flash 2.6.3.3 backups on 2.7
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Flashing is fine but I read with my other devices that backups from previous versions of TWRP may not work properly.
Freegee installed lokid twrp with no issues for me on 12b
Sent from my VS980 4G using xda app-developers app
spinninbsod said:
Can I flash maludus with this recovery and flash 2.6.3.3 backups on 2.7
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
2.6.3.3 backups won't work on 2.7 and vice versa
Sent from my VS980 4G
I love TWRP 2.7.0.0 due to the vibrating feedback and the correct date imprint on backup names.
I'm on VS98012B. Had TWRP 2.6.3.3. Needed to update to TWRP 2.7 to move up to KK. I tried dd flashing the 2.7 from TWRP site. Now some error (too quick to see) comes up and shuts the phone off. Tried flashing with dd this http://forum.xda-developers.com/showpost.php?p=51173763&postcount=4 and got the same error. Tried Flashify and it won't load the image file and when I go to the backup tab it says I have TWRP 2.6.3.3 installed. Any ideas how I can get a custom recovery installed? I'm pretty much dead in the water...
http://forum.xda-developers.com/showpost.php?p=51173763&postcount=4
workdowg said:
I'm on VS98012B. Had TWRP 2.6.3.3. Needed to update to TWRP 2.7 to move up to KK. I tried dd flashing the 2.7 from TWRP site. Now some error (too quick to see) comes up and shuts the phone off. Tried flashing with dd this http://forum.xda-developers.com/showpost.php?p=51173763&postcount=4 and got the same error. Tried Flashify and it won't load the image file and when I go to the backup tab it says I have TWRP 2.6.3.3 installed. Any ideas how I can get a custom recovery installed? I'm pretty much dead in the water...
http://forum.xda-developers.com/showpost.php?p=51173763&postcount=4
Click to expand...
Click to collapse
You have 2.6.3.3 installed now right? If so just flashing mine in recovery will work fine. No need to dd them, probably wouldn't work anyway because in order to to change images in the ramdisk, I have to un-Loki them. Loki'd images can't be unpacked. So after I make changes, I repack and place them in a zip with a Loki patch that works on 11a or 12b. So mine are just to be flashed in recovery.
JRJ442 said:
You have 2.6.3.3 installed now right? If so just flashing mine in recovery will work fine. No need to dd them, probably wouldn't work anyway because in order to to change images in the ramdisk, I have to un-Loki them. Loki'd images can't be unpacked. So after I make changes, I repack and place them in a zip with a Loki patch that works on 11a or 12b. So mine are just to be flashed in recovery.
Click to expand...
Click to collapse
I have no recovery at all now. It just throws up an error (too fast to see) and shuts the phone off.
workdowg said:
I have no recovery at all now. It just throws up an error (too fast to see) and shuts the phone off.
Click to expand...
Click to collapse
I think that's because you tried to flash an unloki'd image. Try flashing this one with Flashify https://www.dropbox.com/s/meddqewk6muv8p5/twrp.img. Its preloki'd and version 2.6.3.3 or.4, if it works you can just flash any of the ones from my thread in recovery to update to 2.7. There's a stock on there too if you don't want a themed one.
http://forum.xda-developers.com/showthread.php?t=2665527
JRJ442 said:
I think that's because you tried to flash an unloki'd image. Try flashing this one with Flashify https://www.dropbox.com/s/meddqewk6muv8p5/twrp.img. Its preloki'd and version 2.6.3.4, if it works you can just flash any of the ones from my thread in recovery to update to 2.7. There's a stock on there too if you don't want a themed one.
http://forum.xda-developers.com/showthread.php?t=2665527
Click to expand...
Click to collapse
I select it in Flashify and it just goes back to the main and nothing happens...
workdowg said:
I select it in Flashify and it just goes back to the main and nothing happens...
Click to expand...
Click to collapse
Try wiping app data on Flashify. And make sure its granted root access.
If all else fails you can try to dd the twrp.img I linked. I don't get why Flashify isn't working though. I've never had that issue. I had someone in my S3 thread that kept having Flashify issues. He used this app and it worked. You could try it too https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
JRJ442 said:
Try wiping app data on Flashify. And make sure its granted root access.
If all else fails you can try to dd the twrp.img I linked. I don't get why Flashify isn't working though. I've never had that issue.
Click to expand...
Click to collapse
Didn't help. Tried their file manager and es file explorer...
workdowg said:
Didn't help. Tried their file manager and es file explorer...
Click to expand...
Click to collapse
Check my edit and try that recovery tools app

Help installing TWRP 2.7 on new G2 with 12B

I have downloaded a TWRP 2.7 flashable zip. The official instructions on the TWRP site talk about using a .img file, but they don't have a 2.7 img for vs980.
Many threads mention some images are Lokified, others are not, I'm not sure how to install.
This is a new G2 with 12B that I'm going to root with IORoot 25, how can I get TWRP installed on it as well, preferably in same adb session?
Thanks
Is this the right way?
flash older 2.6.3.2 img using Flashify
reboot into recovery
flash 2.7 zip
Is there a faster way to do this?
Can someone please help?
ECrispy said:
Can someone please help?
Click to expand...
Click to collapse
Root with ioroot
Flashify has its own download section, I would download the .IMG file in the app, just to make sure you have the correct one.
Follow directions in flashify.
I just did this with cwm and it worked, it might have the latest twrp to flash in the app.
ECrispy said:
Can someone please help?
Click to expand...
Click to collapse
If you just want the easiest method, do this:
Extract twrp.lok from this thread. (first download twrp.zip...the .lok file is in there) Rename the extension to img. Flash that with flashify. Then flash this in recovery. You should now be on twrp 2.7 loki'd for 12b. :good:
Credit for that procedure goes to JRJ442...i just explained his steps from here.
xemnas18 said:
If you just want the easiest method, do this:
Extract twrp.lok from this thread. (first download twrp.zip...the .lok file is in there) Rename the extension to img. Flash that with flashify. Then flash this in recovery. You should now be on twrp 2.7 loki'd for 12b. :good:
Credit for that procedure goes to JRJ442...i just explained his steps from here.
Click to expand...
Click to collapse
+1 This works perfectly.
xemnas18 said:
If you just want the easiest method, do this:
Extract twrp.lok from this thread. (first download twrp.zip...the .lok file is in there) Rename the extension to img. Flash that with flashify. Then flash this in recovery. You should now be on twrp 2.7 loki'd for 12b. :good:
Credit for that procedure goes to JRJ442...i just explained his steps from here.
Click to expand...
Click to collapse
Will this method work if I already have TWRP 2.6.3.3? My goal is: get to TWRP 2.7 but tried to go into TWRP and flash the "openrecovery-twrp-2.7.0.0-vs980.zip", it tells me I can't because it can't find "/tmp/loki.sh" (couldn't capture exact message). Currently I'm on 12B.
thanks
glhelinski said:
Will this method work if I already have TWRP 2.6.3.3? My goal is: get to TWRP 2.7 but tried to go into TWRP and flash the "openrecovery-twrp-2.7.0.0-vs980.zip", it tells me I can't because it can't find "/tmp/loki.sh" (couldn't capture exact message). Currently I'm on 12B.
thanks
Click to expand...
Click to collapse
Yeah the official that you tried doesn't have the correct Loki patch for 12B. Thats why it throws that message. All the ones I made for VS980 are patched to work on 11A or 12B. Just click on "This" a few posts up. That goes to my Dropbox. The zip is Stock-TWRP2.7-VS980. Just flash in recovery, then reboot recovery and it'll be 2.7
Or if you have Flashify you can download and install 2.7 through that.
These one click tools worked for me. I went from 12b + stock recovery to twrp 2.7 with just a few clicks. I used it yesterday. Thread http://forum.xda-developers.com/showthread.php?t=2713954
Sent from my VS980 4G using XDA Premium 4 mobile app
JRJ442 said:
Yeah the official that you tried doesn't have the correct Loki patch for 12B. Thats why it throws that message. All the ones I made for VS980 are patched to work on 11A or 12B. Just click on "This" a few posts up. That goes to my Dropbox. The zip is Stock-TWRP2.7-VS980. Just flash in recovery, then reboot recovery and it'll be 2.7
Or if you have Flashify you can download and install 2.7 through that.
Click to expand...
Click to collapse
thanks. worked as expected.
thanks for sharing
Sent from my LG-VS980 using XDA Free mobile app

[Q] 26a and TWRP help

I successfully rooted my lg g2 on 26a with stump, but I'm wondering as how i can get twrp installed without bricking. Will the VS980 Autorec work with 26a? or is there any other solution please help me out. BTW i just got my phone back from LG so i don't want to brick again and have to send it in lol. Thanks in adcanve!
uraks said:
I successfully rooted my lg g2 on 26a with stump, but I'm wondering as how i can get twrp installed without bricking. Will the VS980 Autorec work with 26a? or is there any other solution please help me out. BTW i just got my phone back from LG so i don't want to brick again and have to send it in lol. Thanks in adcanve!
Click to expand...
Click to collapse
Not sure about autorec (never used it) but I know Freedom Tool works (used it twice):
http://forum.xda-developers.com/showthread.php?t=2713954
Have any questions, don't hesitate to ask!
uraks said:
I successfully rooted my lg g2 on 26a with stump, but I'm wondering as how i can get twrp installed without bricking. Will the VS980 Autorec work with 26a? or is there any other solution please help me out. BTW i just got my phone back from LG so i don't want to brick again and have to send it in lol. Thanks in adcanve!
Click to expand...
Click to collapse
Yes, AutoRec will work just fine. I've used it plenty of times on 26A.
bouchigo said:
Yes, AutoRec will work just fine. I've used it plenty of times on 26A.
Click to expand...
Click to collapse
But in my case the AutoREC can't flash those 24A, 24A, 12A/B ... in zip format ... all ERROR can't read ZIP file....
You got any idea where I could get the working VS98026A Stock ROM?
THank in advance
mKHMER
mkhmer said:
But in my case the AutoREC can't flash those 24A, 24A, 12A/B ... in zip format ... all ERROR can't read ZIP file....
You got any idea where I could get the working VS98026A Stock ROM?
THank in advance
mKHMER
Click to expand...
Click to collapse
Autorec doesn't use a zip, it just does the behind the scene things needed to flash TWRP then flashes it. Can you clarify what you're trying to do?
mjones73 said:
Autorec doesn't use a zip, it just does the behind the scene things needed to flash TWRP then flashes it. Can you clarify what you're trying to do?
Click to expand...
Click to collapse
As far as I could see that latest AUTORec.apk installation is now included with TWRP already. After rooted my phone, installed AUTOREC, grant root and flashing customer recovery image straight aways, I could flash some ZIP file but not those ROM such VS98011A, VS98024A, VS98026A, etc all return FAIL - Can't Read Zip file. But I from AutoREC recovery menu, I could install Spirit ROM.zip and others.
Why only those stock ROM in zip format are FAIL to be flashed from within AUTOREC/TWRP ????
mkhmer said:
As far as I could see that latest AUTORec.apk installation is now included with TWRP already. After rooted my phone, installed AUTOREC, grant root and flashing customer recovery image straight aways, I could flash some ZIP file but not those ROM such VS98011A, VS98024A, VS98026A, etc all return FAIL - Can't Read Zip file. But I from AutoREC recovery menu, I could install Spirit ROM.zip and others.
Why only those stock ROM in zip format are FAIL to be flashed from within AUTOREC/TWRP ????
Click to expand...
Click to collapse
Autorec flashes TWRP, that's it, once in recovery you're just using TWRP. You can delete Autorec from your phone after you're done flashing TWRP. Anyway, you can't install stock releases via TWRP unless a dev modifies one to be flashed. Care to point to one of the zip's you're trying to flash?
bouchigo said:
Yes, AutoRec will work just fine. I've used it plenty of times on 26A.
Click to expand...
Click to collapse
Where you able to flash the latest 2.8.1.0 Twrp zip after using AutoRec?
droidrev71 said:
Where you able to flash the latest 2.8.1.0 Twrp zip after using AutoRec?
Click to expand...
Click to collapse
If I recall correctly, AutoRec doesn't have the most up-to-date recovery built-in. I just flashed the latest afterward.
bouchigo said:
Yes, AutoRec will work just fine. I've used it plenty of times on 26A.
Click to expand...
Click to collapse
bouchigo said:
If I recall correctly, AutoRec doesn't have the most up-to-date recovery built-in. I just flashed the latest afterward.
Click to expand...
Click to collapse
Correct, AutoRec comes with 2.7.0.0. I tried upgrading Twrp by flashing the latest Twrp zip and it failed. I guess it's just my device. I looked for the 2.8.1.0. Img file but couldn't find it.
droidrev71 said:
Correct, AutoRec comes with 2.7.0.0. I tried upgrading Twrp by flashing the latest Twrp zip and it failed. I guess it's just my device. I looked for the 2.8.1.0. Img file but couldn't find it.
Click to expand...
Click to collapse
Extract the one from the 26A bootstack, it's already lokied.
bouchigo said:
Extract the one from the 26A bootstack, it's already lokied.
Click to expand...
Click to collapse
Thanks but that's not the most current. 2.8.0.1 is in the bootstack.. i don't get why the 2.8.1.0 zip fails when I flash.. I guess I might have to try the bumped one.

[ROM] VZW 27A Rooted Debloated ROM & 27A Bootstack, Radio's

Here's Verizon OTA 27A Stock, Rooted, Debloated ROM I made from KDZ file.
If your full stock OTA then get custom recovery on your 27A by using my Freedom Bumped tools found here:
http://forum.xda-developers.com/ver...-one-click-t2942677/post56806002#post56806002
If already have custom recovery then you can flash the 27A boostack. Special thanks to xdabbeb's scripts.
27A Bootstack download:
https://mega.co.nz/#!lQk0zCSC!HZUyWdldy8V4xa-bbbjwfOchoXT45kVvRI0w83oW6Ds
MD5: 2c62c656eeee51bcadf0f537f32805f2
Then flash ROM from Recovery. Full wipe recomended if not comming from 26A.
Download: <--------------------------------------
https://mega.co.nz/#!pMcyhLxK!Xb0rH1UDTTonG5e3gcEbe4xAsF5vHgh-4ztYxgD72eM
MD5: bb1e2575df1ad7fcab83172d5bb113c8
--------------------------------
Here's 27A Radio if you don't have it. Backup your current radio or modem first.
https://mega.co.nz/#!RdlFib7R!ZRIuMrUu9hMDYmb_Q5VmUxBw1MYOWvdQHUK5igpDiUo
26A Radio:
https://mega.co.nz/#!VMsnlIYC!eKnB_IulJao6Qs-ccT3W-kY_3KZZ3L_qfL-ciWmMHo0
24A Radio:
https://mega.co.nz/#!pR8U0YqC!VUyYqe7tpkZMi3EnBd3HWLJ9ARO4S8rrv5N9Utmd_Tg
resevered....
how does this compare to xdabbebs v980 2.3?
Nblufire12 said:
how does this compare to xdabbebs v980 2.3?
Click to expand...
Click to collapse
I believe his is on 26A base, as this one is the newest 27A.
Flashed rom, knock on doesn't work and I can't seem to get into the hidden menu to update the touch firmware.
unknownbeing said:
Flashed rom, knock on doesn't work and I can't seem to get into the hidden menu to update the touch firmware.
Click to expand...
Click to collapse
Try this fix:
http://forum.xda-developers.com/verizon-g2/general/easy-verizons-hidden-menu-t2825967
Thanks for putting this together!
Thanks for the ROM. Everything is working fine after flashing the hidden menu zip. No bugs or issues after 72 hours of use.
Sent from somewhere in time
Please delete. Copied to Q&A
If already have custom recovery then you can flash the 27A boostack. Special thanks to xdabbeb's scripts.
27A Bootstack download:
https://mega.co.nz/#!lQk0zCSC!HZUyWdldy8V4xa-bbbjwfOchoXT45kVvRI0w83oW6Ds
MD5: 2c62c656eeee51bcadf0f537f32805f2
27A Radio
MicroMod777 said:
Here's Verizon OTA 27A Stock, Rooted, Debloated ROM I made from KDZ file.
If your full stock OTA then get custom recovery on your 27A by using my Freedom Bumped tools found here:
http://forum.xda-developers.com/ver...-one-click-t2942677/post56806002#post56806002
If already have custom recovery then you can flash the 27A boostack. Special thanks to xdabbeb's scripts.
27A Bootstack download:
https://mega.co.nz/#!lQk0zCSC!HZUyWdldy8V4xa-bbbjwfOchoXT45kVvRI0w83oW6Ds
MD5: 2c62c656eeee51bcadf0f537f32805f2
Then flash ROM from Recovery. Full wipe recomended if not comming from 26A.
Download: <--------------------------------------
https://mega.co.nz/#!pMcyhLxK!Xb0rH1UDTTonG5e3gcEbe4xAsF5vHgh-4ztYxgD72eM
MD5: bb1e2575df1ad7fcab83172d5bb113c8
--------------------------------
Here's 27A Radio if you don't have it. Backup your current radio or modem first.
https://mega.co.nz/#!RdlFib7R!ZRIuMrUu9hMDYmb_Q5VmUxBw1MYOWvdQHUK5igpDiUo
Click to expand...
Click to collapse
I want to install the 27A bootstack (I am tired of the OTA popping up on my screeen),Why would I need the 27ARadio? I already have a full backup but how do I backup just my current 26A Radio? Thanks ahead of time.
Jose G
garciajo said:
I want to install the 27A bootstack (I am tired of the OTA popping up on my screeen),Why would I need the 27ARadio? I already have a full backup but how do I backup just my current 26A Radio? Thanks ahead of time.
Jose G
Click to expand...
Click to collapse
27A Bootstack will install 27A radio. But if you want 26A Radio, here you go:
26A Radio:
https://mega.co.nz/#!VMsnlIYC!eKnB_IulJao6Qs-ccT3W-kY_3KZZ3L_qfL-ciWmMHo0
Phone is bricked
Help.! after flashing 27A bootstack in my lg g2 from recovery, my phone wont restart correctly get an error says:"secure booting error! cause: boot certificate verify" Than I just get a black screen.
Any help please??
Thanks
Jose G
garciajo said:
Help.! after flashing 27A bootstack in my lg g2 from recovery, my phone wont restart correctly get an error says:"secure booting error! cause: boot certificate verify" Than I just get a black screen.
Any help please??
Thanks
Jose G
Click to expand...
Click to collapse
can u get into TWRP using hardware buttons? If so try to reflash xdabbeb 26A bootstack
HueyT said:
can u get into TWRP using hardware buttons? If so try to reflash xdabbeb 26A bootstack
Click to expand...
Click to collapse
I am trying all different combination but can not get into TWRP, When I plugged it into my computer Linux system, I can see all the partitions though.
Thanks
Jose G
garciajo said:
I am trying all different combination but can not get into TWRP, When I plugged it into my computer Linux system, I can see all the partitions though.
Thanks
Jose G
Click to expand...
Click to collapse
I am now able to boot into recovery TWRP, But nothing seems to work, I restore and restore 2 previous back ups but nothing, any suggestions?
Jose G
MicroMod777 said:
If already have custom recovery then you can flash the 27A boostack. Special thanks to xdabbeb's scripts.
27A Bootstack download:
https://mega.co.nz/#!lQk0zCSC!HZUyWdldy8V4xa-bbbjwfOchoXT45kVvRI0w83oW6Ds
MD5: 2c62c656eeee51bcadf0f537f32805f2
Click to expand...
Click to collapse
Thank you for your work!!! :
Any chance of updating TWRP to 2.8.4.0?
I tried updating using TWRP 2.8.1.1 which is included in this bootstack but I get error. and installation fails.
garciajo said:
I am now able to boot into recovery TWRP, But nothing seems to work, I restore and restore 2 previous back ups but nothing, any suggestions?
Jose G
Click to expand...
Click to collapse
When I get stuck I use a USB OTG cable with usb drive to reflash rom and bootstack.
MicroMod777 said:
When I get stuck I use a USB OTG cable with usb drive to reflash rom and bootstack.
Click to expand...
Click to collapse
Thats a good option, at the moment I dont have the cable, is there any way I could see the SDCARD on my compouter so that I can transfer a recovery Rom?
garciajo said:
Thats a good option, at the moment I dont have the cable, is there any way I could see the SDCARD on my compouter so that I can transfer a recovery Rom?
Click to expand...
Click to collapse
ADB push can work: http://androidforums.com/threads/how-to-adb-push-a-rom-to-the-sdcard.602128/
But, I would invest in $15 microUSB/USB duo 32gb card from Newegg or a $1 USB OTG cable that let you use any USB flash drive (on Ebay)

[Q&A] [ROM] VS980 39A Lollipop

Q&A for [ROM] VS980 39A Lollipop
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] VS980 39A Lollipop. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
NalNalas said:
Here's a fix for the LED being constantly on
1. Disable notification light
2. Reboot
done
Click to expand...
Click to collapse
That works but kills the front one too.
I flashed the rom, bootstack, and supsersu (in that order) and I get a kernel crash when booting.
"kernel panic - not syncing L2 master port error detected"
Any ideas?
zone117x said:
I flashed the rom, bootstack, and supsersu (in that order) and I get a kernel crash when booting.
"kernel panic - not syncing L2 master port error detected"
Any ideas?
Click to expand...
Click to collapse
Flash bootstack, then rom n supersu.
MicroMod777 said:
Flash bootstack, then rom n supersu.
Click to expand...
Click to collapse
Alright I did that but its been on the Verizon boot animation for over 20 minutes now. Is something still wrong?
Do I have to have anything installed that wasn't mentioned in the post?
Thanks
zone117x said:
Alright I did that but its been on the Verizon boot animation for over 20 minutes now. Is something still wrong?
Do I have to have anything installed that wasn't mentioned in the post?
Thanks
Click to expand...
Click to collapse
U full wipe?
Am I missing it or is knock code still not here? Is it in the manual ota method or neither? Any ways thanks for the Rom because grola was starting to mess up.
So, I'm on the forced OTA 39A and everything is running great, I also just rooted it using this method here http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
Anyway to install TWRP onto this yet? I did a stupid thing and installed AutoRec and flashed recovery just to try it, and it worked fine. Until I rebooted out of recovery, then I got the dreaded LG Security Error. So I had to restore back to 27A and go back to 39A.
LetsHaveSomeAndroidFun said:
So, I'm on the forced OTA 39A and everything is running great, I also just rooted it using this method here http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
Anyway to install TWRP onto this yet? I did a stupid thing and installed AutoRec and flashed recovery just to try it, and it worked fine. Until I rebooted out of recovery, then I got the dreaded LG Security Error. So I had to restore back to 27A and go back to 39A.
Click to expand...
Click to collapse
This is a bit of a guess, so proceed at your own risk, but could you use AutoRec to install recovery, then once in recovery, flash the 39A bootstack from this thread, which also contains a bumped TWRP? I'm thinking the patched kernel that AutoRec installs is what's breaking things
Don't do this. Doesn't work
detonation said:
This is a bit of a guess, so proceed at your own risk, but could you use AutoRec to install recovery, then once in recovery, flash the 39A bootstack from this thread, which also contains a bumped TWRP? I'm thinking the patched kernel that AutoRec installs is what's breaking things
Click to expand...
Click to collapse
Well, I just spent the last few hours re-setting up my device again, but I'll try it. Might as well, if it doesn't work I'll just re-do everything again lol. I wish I would of known that the bootstack for 39A was available, I would of tried it then but oh well. Will let you know how it goes.
---------- Post added at 10:18 AM ---------- Previous post was at 10:05 AM ----------
Nope, just tried it. After installing the recovery then the bootstack I restart and I get secure booting error boot certification verify and the only thing I can do is get back into recovery, so no good.
LetsHaveSomeAndroidFun said:
Well, I just spent the last few hours re-setting up my device again, but I'll try it. Might as well, if it doesn't work I'll just re-do everything again lol. I wish I would of known that the bootstack for 39A was available, I would of tried it then but oh well. Will let you know how it goes.
---------- Post added at 10:18 AM ---------- Previous post was at 10:05 AM ----------
Nope, just tried it. After installing the recovery then the bootstack I restart and I get secure booting error boot certification verify and the only thing I can do is get back into recovery, so no good.
Click to expand...
Click to collapse
Well thanks for being the guinea pig at least. In retrospect, AutoRec loki's your boot.img, but those bootstack zips don't include a bumped boot.img (since they are rom specific I think) so you get the security error still. I'll leave this up to the experts from now on
detonation said:
Well thanks for being the guinea pig at least. In retrospect, AutoRec loki's your boot.img, but those bootstack zips don't include a bumped boot.img (since they are rom specific I think) so you get the security error still. I'll leave this up to the experts from now on
Click to expand...
Click to collapse
You're welcome, not a problem! I see, I have all the partitions of this ROM including boot.img, maybe if I name it update.zip and flash it via TWRP I can get it to boot? I think I'll try it...It's worth a shot.
LetsHaveSomeAndroidFun said:
You're welcome, not a problem! I see, I have all the partitions of this ROM including boot.img, maybe if I name it update.zip and flash it via TWRP I can get it to boot? I think I'll try it...It's worth a shot.
Click to expand...
Click to collapse
All else fails, and you still want to be the closest to stock 39a with root and recovery, I suppose you could just wipe, flash the 27A bootstack, flash this 39A ROM, then flash the 39A bootstack (should't need to KDZ or anything assuming you're still able to get into TWRP). According to this post the differences in this rom and stock are the basically the components that we couldn't pull before root was available, but now they're availabe and in that bootstack zip - once again, no guarantees though, I think I'll try to be patient and wait for the devs to release something
detonation said:
All else fails, and you still want to be the closest to stock 39a with root and recovery, I suppose you could just wipe, flash the 27A bootstack, flash this 39A ROM, then flash the 39A bootstack (should't need to KDZ or anything assuming you're still able to get into TWRP). According to this post the differences in this rom and stock are the basically the components that we couldn't pull before root was available, but now they're availabe and in that bootstack zip - once again, no guarantees though, I think I'll try to be patient and wait for the devs to release something
Click to expand...
Click to collapse
You can't install the recovery because you need the 4.4 aboot. You can adb the the 27A aboot.img through a terminal on your pc or on your phone, then adb blastagator's recovery, and you will be able to have recovery. I'm running twrp no problems right now.
EDIT:
Need a bumped boot.img too. I was bootlooping until I applied one.
bouchigo said:
You can't install the recovery because you need the 4.4 aboot. You can adb the the 27A aboot.img through a terminal on your pc or on your phone, then adb blastagator's recovery, and you will be able to have recovery. I'm running twrp no problems right now.
EDIT:
Need a bumped boot.img too. I was bootlooping until I applied one.
Click to expand...
Click to collapse
Thanks for this.
So I need to be on rooted 39A and then adb flash aboot.img and then adb flash recovery? And any help for a bumped boot.img? I've only had my LG G2 about 2 weeks. Thank you.
bouchigo said:
You can't install the recovery because you need the 4.4 aboot. You can adb the the 27A aboot.img through a terminal on your pc or on your phone, then adb blastagator's recovery, and you will be able to have recovery. I'm running twrp no problems right now.
EDIT:
Need a bumped boot.img too. I was bootlooping until I applied one.
Click to expand...
Click to collapse
Where did you get the bumped boot.img from? Also, all the bootloader files in the resource thread are bins, not imgs, does that matter?
To get to stock rooted 39A with TWRP, it sounds like the process is:
-manually apply 39A OTA
-root using new exploit
-push 27A (or 28A) aboot
-push bumped 39A boot.img
-push TWRP
LetsHaveSomeAndroidFun said:
Thanks for this.
So I need to be on rooted 39A and then adb flash aboot.img and then adb flash recovery? And any help for a bumped boot.img? I've only had my LG G2 about 2 weeks. Thank you.
Click to expand...
Click to collapse
Yes. See below.
detonation said:
Where did you get the bumped boot.img from? Also, all the bootloader files in the resource thread are bins, not imgs, does that matter?
To get to stock rooted 39A with TWRP, it sounds like the process is:
-manually apply 39A OTA
-root using new exploit
-push 27A (or 28A) aboot
-push bumped 39A boot.img
-push TWRP
Click to expand...
Click to collapse
Yeah, either 27A or 28A (confirmed by xdabbeb) should work. I bumped the 39A boot image myself (not hard to do, the info. is readily available on how to do it).
Just change the .bin to .img.
Here is the boot image (adb push it, not a flash file): http://www.mediafire.com/download/pele8oikzesdn39/bumped_boot-image.zip
MD5Sum (of zip file): 6b1f793cdf00db3ef52d1fd08f7b3af2
MD5Sum (of boot.img itself): b4254d5aebe30ad4f1d5e924f45e9bff
bouchigo said:
Yes. See below.
Yeah, either 27A or 28A (confirmed by xdabbeb) should work. I bumped the 39A boot image myself (not hard to do, the info. is readily available on how to do it).
Just change the .bin to img.
Here is the boot image (adb push it, not a flash file): http://www.mediafire.com/download/pele8oikzesdn39/bumped_boot-image.zip
MD5Sum (of zip file): 6b1f793cdf00db3ef52d1fd08f7b3af2
MD5Sum (of boot.img itself): b4254d5aebe30ad4f1d5e924f45e9bff
Click to expand...
Click to collapse
If it's not too much trouble, could you give me some step by step instructions? I am trying to push the aboot.img but it's saying device not found, when it is etc..Thank you.
LetsHaveSomeAndroidFun said:
If it's not too much trouble, could you give me some step by step instructions? I am trying to push the aboot.img but it's saying device not found, when it is etc..Thank you.
Click to expand...
Click to collapse
Download this file; inside are the instructions that I wrote up, and links to the files on how to do it: http://www.mediafire.com/download/h7544eak22lp2c9/Install_TWRP_Recovery_on_vs980_LP_39A.zip
bouchigo said:
Download this file; inside are the instruction that I wrote up, and links to the files on how to do it: http://www.mediafire.com/download/h7544eak22lp2c9/Install_TWRP_Recovery_on_vs980_LP_39A.zip
Click to expand...
Click to collapse
Thank you so much, this worked perfectly!

Categories

Resources