Hi ,
I unlocked the bootloader last and installed JB successfully. Now i downloaded the Lollipop RUU from HTC website and trying to update but it is going upto sending files(0/5) . i waited till 30 mins as it is showing it will take ten minutes. im uploading the screenshot of the update.Please help me on this.
thanks,
sai
gopiann said:
Hi ,
I unlocked the bootloader last and installed JB successfully. Now i downloaded the Lollipop RUU from HTC website and trying to update but it is going upto sending files(0/5) . i waited till 30 mins as it is showing it will take ten minutes. im uploading the screenshot of the update.Please help me on this.
thanks,
sai
Click to expand...
Click to collapse
If you are S-ON then you need to have your bootloader "locked/relocked" before the RUU will run successfully.
majmoz said:
If you are S-ON then you need to have your bootloader "locked/relocked" before the RUU will run successfully.
Click to expand...
Click to collapse
My bootloader is already locked .Here is the screenshot.I am getting the Error when i trying to update the rom. I tried in both Windows 7 and 8.1 . SS is attached.
gopiann said:
My bootloader is already locked .Here is the screenshot
Click to expand...
Click to collapse
Can you post a fastboot getvar all except remove your imei and serialno prior to posting?
What RUU are you trying to run and where did you get it?
gopiann said:
My bootloader is already locked .Here is the screenshot.I am getting the Error when i trying to update the rom. I tried in both Windows 7 and 8.1 . SS is attached.
Click to expand...
Click to collapse
majmoz said:
Can you post a fastboot getvar all except remove your imei and serialno prior to posting?
What RUU are you trying to run and where did you get it?
Click to expand...
Click to collapse
I got this RUU from HTC website lollipop update
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4266mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
gopiann said:
I got this RUU from HTC website lollipop update
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4266mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
Click to expand...
Click to collapse
@clsA Do you have any idea why he is not able to run the Lollipop RUU?
Try these steps:
Boot your phone into Bootloader
Plug your phone into your computer you should see FASTBOOT USB
Run the RUU
majmoz said:
@clsA Do you have any idea why he is not able to run the Lollipop RUU?
Try these steps:
Boot your phone into Bootloader
Plug your phone into your computer you should see FASTBOOT USB
Run the RUU
Click to expand...
Click to collapse
I posted the rom.zip with instructions here it might help
http://forum.xda-developers.com/htc-one-att/general/capture-3-31-15-lollipop-ota-update-ruu-t3070978
the firmware and stock recovery are also their
clsA said:
I posted the rom.zip with instructions here it might help
http://forum.xda-developers.com/htc-one-att/general/capture-3-31-15-lollipop-ota-update-ruu-t3070978
the firmware and stock recovery are also their
Click to expand...
Click to collapse
majmoz said:
@clsA Do you have any idea why he is not able to run the Lollipop RUU?
Try these steps:
Boot your phone into Bootloader
Plug your phone into your computer you should see FASTBOOT USB
Run the RUU
Click to expand...
Click to collapse
I tried to as you said but i got error as
Loading zip info fail
update fail!
clsA said:
I posted the rom.zip with instructions here it might help
http://forum.xda-developers.com/htc-one-att/general/capture-3-31-15-lollipop-ota-update-ruu-t3070978
the firmware and stock recovery are also their
Click to expand...
Click to collapse
Can i try this process?
I'm also uploading the Rom.zip from the 7.23.502.1 RUU here >> https://www.androidfilehost.com/?fid=95916177934550030
fastboot oem rebootRUU
fastboot flash zip Rom.zip
fastboot flash zip Rom.zip
fastboot reboot
gopiann said:
Can i try this process?
I'm also uploading the Rom.zip from the 7.23.502.1 RUU here >> https://www.androidfilehost.com/?fid=95916177934550030
fastboot oem rebootRUU
fastboot flash zip Rom.zip
fastboot flash zip Rom.zip
fastboot reboot
Click to expand...
Click to collapse
for this command it is showing fastboot oem rebootRUU "Waiting for devices"
gopiann said:
for this command it is showing fastboot oem rebootRUU "Waiting for devices"
Click to expand...
Click to collapse
You need to install the HTC drivers if your phone is not seen in fastboot
clsA said:
You need to install the HTC drivers if your phone is not seen in fastboot
Click to expand...
Click to collapse
thanks but its already installed latest drivers and tested on both Windows 7 and 8.1
gopiann said:
thanks but its already installed latest drivers and tested on both Windows 7 and 8.2
Click to expand...
Click to collapse
155 error is wrong RUU and I can see from your fastboot getvar all its the wrong RUU, your on 4xxxx firmware and trying to flash 7xxxxxx firmware, you need all of the 5xxxx and 6xxxxxx first before the RUU will work, you cant just jump straight from 4 to 7, if you had of got it to work you would have a nice new paperweight now, only way too do that is get s-off.
Seanie280672 said:
155 error is wrong RUU and I can see from your fastboot getvar all its the wrong RUU, your on 4xxxx firmware and trying to flash 7xxxxxx firmware, you need all of the 5xxxx and 6xxxxxx first before the RUU will work.
Click to expand...
Click to collapse
then i have yo update first 5.XXX then 7.XXXX right?
gopiann said:
then i have yo update first 5.XXX then 7.XXXX right?
Click to expand...
Click to collapse
you need all of the 5xxxx firmware packages and all of the 6xxxxxx packages, then after you've finished all of those, you can run the Lollipop 7xxxx RUU.
You may be able to find them in the HTC One AT&T forums http://forum.xda-developers.com/htc-one-att/general
Seanie280672 said:
you need all of the 5xxxx firmware packages and all of the 6xxxxxx packages, then after you've finished all of those, you can run the RUU.
You may be able to find them in the HTC One AT&T forums http://forum.xda-developers.com/htc-one-att/general
Click to expand...
Click to collapse
after 5.XXXX, they released 7.XXXXX i guess
gopiann said:
after 5.XXXX, they released 7.XXXXX i guess
Click to expand...
Click to collapse
couldnt tell you myself, do you have an AT&T sim in your phone ?
Seanie280672 said:
couldnt tell you myself, do you have an AT&T sim in your phone ?
Click to expand...
Click to collapse
sorry bro i forgot to tell that mobile is using now in India.
gopiann said:
sorry bro i forgot to tell that mobile is using now in India.
Click to expand...
Click to collapse
thats why you cant do OTA's, you better off just getting s-off and converting the phone, you must be connected to the AT&T network to get OTA's.
To get s-off though, you will need to use sunshine which will cost $25 and need a working stock rom on your phone.
if your going to flash firmware on your phone whilst s-on, you need to be very careful you dont skip any steps or packages or you'll brick your phone.
gopiann said:
sorry bro i forgot to tell that mobile is using now in India.
Click to expand...
Click to collapse
Seanie280672 said:
thats why you cant do OTA's, you better off just getting s-off and converting the phone, you must be connected to the AT&T network to get OTA's.
To get s-off though, you will need to use sunshine which will cost $25 and need a working stock rom on your phone.
if your going to flash firmware on your phone whilst s-on, you need to be very careful you dont skip any steps or packages or you'll brick your phone.
Click to expand...
Click to collapse
First off their was no 6.x firmware for AT&T ... he's on 4.x so a 5.x firmware followed by the RUU should work
If your getting waiting on device after fastboot oem rebootRUU your drivers are not installed correctly
See post 2 FAQ 2 of nkk71 guide here on how to get fastboot driver working >> http://forum.xda-developers.com/showthread.php?t=2541082
I updated one phone with the OTA and another with the RUU so I know they both work, problem is I could not locate the first OTA to 5.32.502.3
So flashing just the OTA is out until I get that missing file (you would also need s-off to use the OTAPkg.zip's)
Related
Help please?? I am trying to RUU my HTC One. I successfully relocked my bootloader.
However, when I start the process, it fails (unknown error). I am told that I need to use the "correct" RUU and try again. My problem is that the one I am using claims to be correct. Sprint_HTD_One_m7wls_1.29651.10_RUU.zip
I have noticed that when I am going through the RUU process I am shown the screen that asks to compare the current version with the new one. The current image version is blank. Nothing there. No current image version at all.
slaldrich said:
Help please?? I am trying to RUU my HTC One. I successfully relocked my bootloader.
However, when I start the process, it fails (unknown error). I am told that I need to use the "correct" RUU and try again. My problem is that the one I am using claims to be correct. Sprint_HTD_One_m7wls_1.29651.10_RUU.zip
I have noticed that when I am going through the RUU process I am shown the screen that asks to compare the current version with the new one. The current image version is blank. Nothing there. No current image version at all.
Click to expand...
Click to collapse
post the output of ''fastboot getvar all'' except imei and sn
alray said:
post the output of ''fastboot getvar all'' except imei and sn
Click to expand...
Click to collapse
Here it is:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: N/A
version-cpld: none
version-microp:none
version- main:
version -misc: PVT SHIP S-ON
serialno: (you asked this not be included) but it is present
meid: number present, not included
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery status: good
battery voltage: 4280mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate 11
gencheckpt: 0
I also notice that on the fastboot screen, it reads:
**TAMPERED**
**RELOCKED**
**SECURITY WARNING**
m7_WLS PVT SHIP S-ON RH
HBOOT- 1.56.0000
OpenDSP- v32. 120.274.0909
OS- (blank)
eMMC-boot 2048 MB
Jan.23 2014, 22:11:35.0
thanks for looking at this!
slaldrich said:
Here it is:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: N/A
version-cpld: none
version-microp:none
version- main:
version -misc: PVT SHIP S-ON
serialno: (you asked this not be included) but it is present
meid: number present, not included
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery status: good
battery voltage: 4280mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate 11
gencheckpt: 0
thanks for looking at this!
Click to expand...
Click to collapse
The RUU you are trying to flash is a downgrade, thats why you can't flash it. 1.29.651.10 is for hboot 1.44 and you are on 1.56. You need s-off to downgrade with a ruu.
Refer to the sprint htc one forum to see if this is possible to s-off your phone on hboot 1.56 and then downgrade using the ruu
or
flash a rom for sprint htc one.
alray said:
The RUU you are trying to flash is a downgrade, thats why you can't flash it. 1.29.651.10 is for hboot 1.44 and you are on 1.56. You need s-off to downgrade with a ruu.
Refer to the sprint htc one forum to see if this is possible to s-off your phone on hboot 1.56 and then downgrade using the ruu
or
flash a rom for sprint htc one.
Click to expand...
Click to collapse
I understand s-off isn't possible. can you give me direction for getting started with your second suggestion "flash a rom for sprint htc one"?
slaldrich said:
I understand s-off isn't possible. can you give me direction for getting started with your second suggestion "flash a rom for sprint htc one"?
Click to expand...
Click to collapse
first your bootloader is relocked, you'll need to unlock it.
flash twrp recovery for M7WLS (sprint variant)
then download a sprint compatible rom. You can find them here .
push it to your phone and flash it.
If you have questions about how to do any of these steps ask me here, we'll go step by step...
alray said:
first your bootloader is relocked, you'll need to unlock it.
flash twrp recovery for M7WLS (sprint variant)
then download a sprint compatible rom. You can find them here .
push it to your phone and flash it.
If you have questions about how to do any of these steps ask me here, we'll go step by step...
Click to expand...
Click to collapse
My basic problem is that my radios were not connecting with Sprint at all. So, I understand that I need to do a RUU to fix that. Flashing a custom rom won't fix that (?). Now, I am unlocked with S-on. I have TWRP available. When I reboot, I am taken to the HTC lock screen, but if I unlock it, I get a white HTC screen that lets me do nothing.
I just want to get it back to what I had when I took it out of the box. If you can walk me though this, I would appreciate it. I am NH if we can do this vocally.
slaldrich said:
I just want to get it back to what I had when I took it out of the box. If you can walk me though this, I would appreciate it. I am NH if we can do this vocally.
Click to expand...
Click to collapse
With s-on, its not possible to use the available ruu. You could use the latest guru reset rom available for your phone. Select the option to wipe, install stock recovery and stock radio.
http://www.htc1guru.com/dld/guru_reset_m7_sprint_3-04-651-2-zip/
alray said:
With s-on, its not possible to use the available ruu. You could use the latest guru reset rom available for your phone. Select the option to wipe, install stock recovery and stock radio.
Is it possible to get my s-off again? If so, how might I do that?
Click to expand...
Click to collapse
slaldrich said:
alray said:
With s-on, its not possible to use the available ruu. You could use the latest guru reset rom available for your phone. Select the option to wipe, install stock recovery and stock radio.
Is it possible to get my s-off again? If so, how might I do that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2633276
Click to expand...
Click to collapse
alray said:
slaldrich said:
okay, I got s-off. now, how do I downgrade hboot?
or
where do I go from here?
and... I really appreciate this!!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
slaldrich said:
alray said:
slaldrich said:
okay, I got s-off. now, how do I downgrade hboot?
or
where do I go from here?
and... I really appreciate this!!
Click to expand...
Click to collapse
download this ruu.zip http://www.htc1guru.com/dld/ruu-zip-m7_wls_jb_50_sprint_1-29-651-10_ruu_decrypted-zip/
save it in the same folder where adb and fastboot are
reboot your phone in bootloader mode, select fasboot, plug your usb cable.
open your command prompt from fastboot/adb folder
type:
Code:
fastboot oem rebootRUU
(make sure you use capital letter for RUU)
your phone will reboot in ruu mode, a black screen with a silver HTC logo
then type:
Code:
fastboot flash zip <name_of_ruu_you_have_downloaded>.zip (without < and >)
wait for the ruu to flash. It will probably output something like: failed, flush image again so do the same command again
Code:
fastboot flash zip <name_of_ruu_you_have_downloaded>.zip (without < and >)
then
Code:
fastboot reboot
your phone should boot to your stock rom.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
the download link from htcguru is broken... no download available there
Is there anything else I can use? a different link, perhaps?
slaldrich said:
the download link from htcguru is broken... no download available there
Is there anything else I can use? a different link, perhaps?
Click to expand...
Click to collapse
Don't forget to quote me for faster answer
I have just tested the link and it work fine for me, the download speed isn't great atm but you'll be able to get the file in maybe 1 hour (200-300 Kb/sec)
alray said:
Don't forget to quote me for faster answer
I have just tested the link and it work fine for me, the download speed isn't great atm but you'll be able to get the file in maybe 1 hour (200-300 Kb/sec)
Click to expand...
Click to collapse
The download has begun working but all my attempts truncate/stop at around 20MB... Nowhere near 1gb. I will keep trying -- because right now I have an HTC One with working Cyanogenmod... but no connectivity at all with Sprint.
Do you happen to have a copy you can throw in dropbox for me?
And... this is the first time I've ever used these forums, so, I am still learning what I am doing. Thanks for your patience
I did download a rom called
Sprint_HTC_One_3.04.651.2_Stock_Rooted_Odexed.zip
If I flash this, will it fix my radios or will it just put me deeper in the hole?
I am on my 10th try for the htc1guru ... but none has made it past 40mb
alray said:
Don't forget to quote me for faster answer
I have just tested the link and it work fine for me, the download speed isn't great atm but you'll be able to get the file in maybe 1 hour (200-300 Kb/sec)
Click to expand...
Click to collapse
I finally was able to download the entire file. Then, I carefully followed instructions as you sent...
At last step, I received a "failed 32 header error"
so, I repeated the flashboot flash zip command again. same error
repeated a third time. same error
did fastboot reboot and.... nothing still at cyanogenmod with no connectivity. It didn't take.
It went as planned up until the Failed message.
Please tell me you have another idea or a way to deal with this.
alray said:
Don't forget to quote me for faster answer
I have just tested the link and it work fine for me, the download speed isn't great atm but you'll be able to get the file in maybe 1 hour (200-300 Kb/sec)
Click to expand...
Click to collapse
I did finally get the entire file... and did everything you suggested. Unfortunately, I got a Failed remote "32 header error"
I repeated the whole procedure a second time. Still nothing. I checked the MD5 of the file and it apparently was corrupt.
SO... I was back to Cyanogenmod 11 with no Sprint. As a last ditch try before retiring to bed, I came upon a zip file that said it had Sprint radio files. I figured, heck, what have I got to lose? So, I flashed the small zip. and POOF... works! My phone is back AND I didn't have to go back to stock.
I do want to say THANK YOU for all your help. Knowing you were there to help me along encouraged me not to throw my phone under a passing truck. I am sure that once we got that dang file downloaded correctly, it would have worked.
Even though it didn't turn out as we started.... your help was immeasurable for me. Thanks again.
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA34NS902058
(bootloader) imei: 99-------------------1
(bootloader) meid: 99-----------------
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3885mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
after flash custom rom imei & baseband gone plezzzzzz help n i can not flash any RUU or official rom
smrussel said:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA34NS902058
(bootloader) imei: 99-------------------1
(bootloader) meid: 99-----------------
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3885mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
after flash custom rom imei & baseband gone plezzzzzz help n i can not flash any RUU or official rom
Click to expand...
Click to collapse
Did you flashed a sprint compatible custom rom? You can't flash custom roms for the M7_UL on your m7_wls, both phones haves different partitions layout. Reflash a sprint custom Ron using a sprint compatible custom recovery or flash the latest sprint ruu from htc website (Google search: htc support rom download).
Sent from my HTC One using XDA Labs
alray said:
Did you flashed a sprint compatible custom rom? You can't flash custom roms for the M7_UL on your m7_wls, both phones haves different partitions layout. Reflash a sprint custom Ron using a sprint compatible custom recovery or flash the latest sprint ruu from htc website (Google search: htc support rom download).
Sent from my HTC One using XDA Labs
Click to expand...
Click to collapse
i tried to flash with sprint Ruu but flash could not complete due to an error
Hey, Im s-off on bell mobility in canada. Hboot 1.57. Was wondering what my best way to change over to a developers edition would be>
Howie3045 said:
Hey, Im s-off on bell mobility in canada. Hboot 1.57. Was wondering what my best way to change over to a developers edition would be>
Click to expand...
Click to collapse
I changed my India Rom to US dev edition Rom
1 S Off
2 Install TWRP
3 use Aroma MID changer tool change MID to PN0712000
4 change CID BS_US001
5 now flash any US dev edition firmware
6 Flash RUU of US dev edition
yatindroid said:
I changed my India Rom to US dev edition Rom
1 S Off
2 Install TWRP
3 use Aroma MID changer tool change MID to PN0712000
4 change CID BS_US001
5 now flash any US dev edition firmware
6 Flash RUU of US dev edition
Click to expand...
Click to collapse
which firmware should i install if i am using this ruu.exe http://www.htc1guru.com/dld/ruu_m7_ul_k44_sense55_mr_brightstarus_wwe_4-19-1540-9_radio_4a-23-3263-28_10-38r-1157-04l_release_353887_signed_3-exe/
my htc one isnt a dual sim. its the bell mobility one
Howie3045 said:
which firmware should i install if i am using this ruu.exe http://www.htc1guru.com/dld/ruu_m7_ul_k44_sense55_mr_brightstarus_wwe_4-19-1540-9_radio_4a-23-3263-28_10-38r-1157-04l_release_353887_signed_3-exe/
my htc one isnt a dual sim. its the bell mobility one
Click to expand...
Click to collapse
if you flash the 3.22.1540.1 decrypted ruu from htcguru.com, you dont need to flash the firmware, just follow yatin's instructions. firmware is included in the ruu.
alray said:
if you flash the 3.22.1540.1 decrypted ruu from htcguru.com, you dont need to flash the firmware, just follow yatin's instructions. firmware is included in the ruu.
Click to expand...
Click to collapse
where would i find these instructions. would love some sort of guide so i dont mess this up lol.
Howie3045 said:
where would i find these instructions. would love some sort of guide so i dont mess this up lol.
Click to expand...
Click to collapse
yatin and me can assist you in this thread.
first post the output of "fastboot getvar all" so we can determine what steps are required for you to do the conversion. dont post your IMEI nor the SERIALNO strings of your getvar
alray said:
yatin and me can assist you in this thread.
first post the output of "fastboot getvar all" so we can determine what steps are required for you to do the conversion. dont post your IMEI nor the SERIALNO strings of your getvar
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.666.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4152mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Howie3045 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.666.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4152mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Click to expand...
Click to collapse
1st change cid to BS_US001
Flashing Firmware 3.22.1540.1
fastboot oem rebootRUU
fastboot flash zip firmware.zip (2 times)
fastboot flash zip firmware.zip
fastboot reboot-bootloader
after that Run RUU 4.19.1540.9 then update OTA
Howie3045 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.666.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4152mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Click to expand...
Click to collapse
ok in your case, this will be very easy :good:
first backup every important file (if any) from your phone to your computer, everything will be wiped, including your sdcard content (picture, song, video)
reboot phone in bootloader mode by holding power and volume down
when in bootloader, open a terminal window from your fastboot/adb folder and type:
Code:
fastboot oem writecid BS_US001
fastboot reboot-bootloader
then download this ruu and save it to your adb/fastboot folder. you can rename it ruu (ruu.zip), it will be easier in the terminal.
with phone still on bootloader mode, from the terminal window type:
Code:
fastboot oem rebootRUU
make sure "RUU" in rebootRUU are capital letters. you will now see a black screen with silver htc logo
type:
Code:
fastboot flash zip ruu.zip
it will say something like: "failed, flush image again immediately" so do the same command again:
Code:
fastboot flash zip ruu.zip
then
Code:
fastboot reboot
now your phone will boot normally (first boot can take longer than usual).
when phone is booted, go trough the setup process and then go in settings ---> phone ---> software update.
download and install each ota update from 3.22.1540.1 to 6.07.1540.1 (6 updates total)
or you can proceed like @yatindroid said, 2 differents ways for the same result. both method will works.
alray said:
ok in your case, this will be very easy :good:
first backup every important file (if any) from your phone to your computer, everything will be wiped, including your sdcard content (picture, song, video)
reboot phone in bootloader mode by holding power and volume down
when in bootloader, open a terminal window from your fastboot/adb folder and type:
Code:
fastboot oem writecid BS_US001
fastboot reboot-bootloader
then download this ruu and save it to your adb/fastboot folder. you can rename it ruu (ruu.zip), it will be easier in the terminal.
with phone still on bootloader mode, from the terminal window type:
Code:
fastboot oem rebootRUU
make sure "RUU" in rebootRUU are capital letters. you will now see a black screen with silver htc logo
type:
Code:
fastboot flash zip ruu.zip
it will say something like: "failed, flush image again immediately" so do the same command again:
Code:
fastboot flash zip ruu.zip
then
Code:
fastboot reboot
now your phone will boot normally (first boot can take longer than usual).
when phone is booted, go trough the setup process and then go in settings ---> phone ---> software update.
download and install each ota update from 3.22.1540.1 to 6.07.1540.1 (6 updates total)
or you can proceed like @yatindroid said, 2 differents ways for the same result. both method will works.
Click to expand...
Click to collapse
with your method i dont have to flash firmware first? just change the CID and flash the RUU? I noticed my MID is the same as the Developer Edition anyway.
i wanna say thanks. sure i can click a button but i want you guys to know you've been very help and i appreciate it. ive been pulling my hair out with this phone every since i rooted it. I think after i do this ill be back to where i want to be. Id love to be Bell stock again but i find bell stuff hard too find. Developers Edition shud suit me just fine
Howie3045 said:
with your method i dont have to flash firmware first? just change the CID and flash the RUU? I noticed my MID is the same as the Developer Edition anyway.
Click to expand...
Click to collapse
yes you can try this way but if RUU give error try you need flash firmware
yatindroid said:
yes you can try this way but if RUU give error try you need flash firmware
Click to expand...
Click to collapse
where can i grab that firmware just in case
Howie3045 said:
with your method i dont have to flash firmware first? just change the CID and flash the RUU? I noticed my MID is the same as the Developer Edition anyway.
Click to expand...
Click to collapse
exactly.
MID is already correct
just change mid to BS_US001
and flash the 3.22.1540.1 ruu.
advantage of my method is that its simpler
disadvantage is that its an old version and you'll have to download and install 6 ota updates.
advantage of yatin's method is that its a less old version and will only require 2 ota updates
disadvantage (not really big disadvantage) is to flash the firmware first, if not the ruu.exe will not flash. Personally i don't use 4.xx.xxx.x RUU because I never found any clue that they are official ruu released by HTC (not on their website). But it seem to works fine, I think yatin converted his phone using that ruu
both solution are good, just make sure you flash the right firmware if you go with the 4.xx.1540 ruu
alray said:
exactly.
MID is already correct
just change mid to BS_US001
and flash the 3.22.1540.1 ruu.
advantage of my method is that its simpler
disadvantage is that its an old version and you'll have to download and install 6 ota updates.
advantage of yatin's method is that its a less old version and will only require 2 ota updates
disadvantage (not really big disadvantage) is to flash the firmware first, if not the ruu.exe will not flash. Personally i don't use 4.xx.xxx.x RUU because I never found any clue that they are official ruu released by HTC (not on their website). But it seem to works fine, I think yatin converted his phone using that ruu
both solution are good, just make sure you flash the right firmware if you go with the 4.xx.1540 ruu
Click to expand...
Click to collapse
bootloader will stay unlocked correct? i like simple lol. im downloading the RUU for your method now. I already have all my pictures backed up on a flash drive. ill have to back up a cpl other small things but ill prob give this a try tonight.
Howie3045 said:
bootloader will stay unlocked correct? i like simple lol. im downloading the RUU for your method now. I already have all my pictures backed up on a flash drive. ill have to back up a cpl other small things but ill prob give this a try tonight.
Click to expand...
Click to collapse
yes bootloader will stay unlocked and no need to relock it since dev edition phone came with an unlock bootloader from factory.
alray said:
yes bootloader will stay unlocked and no need to relock it since dev edition phone came with an unlock bootloader from factory.
Click to expand...
Click to collapse
I ran the RUU this morning. phone booted up fine. downloading first update as i type this. awesome. thank you guys so much
and updates are installing....very happy right now.
question though, once i get fully update to date with the dev edition, can i install TWRP and when any new updates come just install the stock recovery? i like using HTC One Tweaker and Sense 6 toolbox.
Howie3045 said:
and updates are installing....very happy right now.
question though, once i get fully update to date with the dev edition, can i install TWRP and when any new updates come just install the stock recovery? i like using HTC One Tweaker and Sense 6 toolbox.
Click to expand...
Click to collapse
if your bootloader is already unlocked, yes you can flash a custom recovery and then revert back to the stock 6.07.1540.1 recovery and install ota.
if your bootloarder is locked, you'll need to unlock it in order to flash a custom recovery and that will wipe /data/preload files and you'll will not be able to install ota directly.
to install ota, you need:
stock recovery
untouched /data/preload files
untouched /system files
Best thing to do is to make a nandroid backup right after flashing twrp. So if some /system files get modified (with a custom kernel for example) you'll be able to restore the backup, flash the stock recovery and install ota.
in last resort you can always flash your phone back to stock with a ruu and apply all ota.
alray said:
if your bootloader is already unlocked, yes you can flash a custom recovery and then revert back to the stock 6.07.1540.1 recovery and install ota.
if your bootloarder is locked, you'll need to unlock it in order to flash a custom recovery and that will wipe /data/preload files and you'll will not be able to install ota directly.
to install ota, you need:
stock recovery
untouched /data/preload files
untouched /system files
Best thing to do is to make a nandroid backup right after flashing twrp. So if some /system files get modified (with a custom kernel for example) you'll be able to restore the backup, flash the stock recovery and install ota.
in last resort you can always flash your phone back to stock with a ruu and apply all ota.
Click to expand...
Click to collapse
im back up and running with all updates. i just ran the RUU u suggested so i assume my bootloader should still be unlocked. i didnt relock it or anything
hello ,
my htc one stuck in 4.3 sense 5.5 and when i check for updates it says you have the latest update !!! how can i fix this ? i never try to s-on or do anything with my mobile
[email protected] said:
hello ,
my htc one stuck in 4.3 sense 5.5 and when i check for updates it says you have the latest update !!!
Click to expand...
Click to collapse
Probably because there is no update available in your country/region. can you post a getvar all except your imei and sn?
alray said:
Probably because there is no update available in your country/region. can you post a getvar all except your imei and sn?
Click to expand...
Click to collapse
whats that ??? i live in UAE/dubai i think that at least i must have 4.4.2 ...... my mobile is s-on
[email protected] said:
whats that ??? i live in UAE/dubai i think that at least i must have 4.4.2 ...... my mobile is s-on
Click to expand...
Click to collapse
read my aboce post again and answer my question otherwise a can't help more. need to know what device you have exactly.
alray said:
read my aboce post again and answer my question otherwise a can't help more. need to know what device you have exactly.
Click to expand...
Click to collapse
ok but how can i get you getvar info ??? from fastboot ?
[email protected] said:
ok but how can i get you getvar info ??? from fastboot ?
Click to expand...
Click to collapse
yes:
install the android sdk or minimal adb and fastboot
install HTC drivers
reboot your phone in bootloader/fastboot mode
open a command prompt from the same folder where adb.exe and fastboot.exe are
type
Code:
fastboot getvar all
copy paste the ouput here except your imei and serialno
alray said:
yes:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\adb\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3856mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
C:\adb\Minimal ADB and Fastboot>
Click to expand...
Click to collapse
[email protected] said:
yes:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\adb\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3856mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
C:\adb\Minimal ADB and Fastboot>
Click to expand...
Click to collapse
Latest version for this phone should be 6.09.401.11 (android 4.4.3 and Sense 6)
If you haven't modded anything on your phone, I'm not sure why you are not receiving any notification...
Maybe you could try to factory reset and look for updates again.
There is also a ruu that could bring your phone up to 4.19.401.9. Then you might be able to receive ota updates from this point.
alray said:
[email protected] said:
Latest version for this phone should be 6.09.401.11 (android 4.4.3 and Sense 6)
If you haven't modded anything on your phone, I'm not sure why you are not receiving any notification...
Maybe you could try to factory reset and look for updates again.
There is also a ruu that could bring your phone up to 4.19.401.9. Then you might be able to receive ota updates from this point.
Click to expand...
Click to collapse
from where i can get ruu and how can i install it ? I'm sorry for bothering man but really thank you
Click to expand...
Click to collapse
[email protected] said:
from where i can get ruu and how can i install it ? I'm sorry for bothering man but really thank you
Click to expand...
Click to collapse
before you flash the ruu, I would recommend to try a factory reset first and then check for update again. Backup everything before as both the RUU and Factory reset will wipe your phone.
The ruu can be found here: http://www.htc1guru.com/2014/03/android-ruu-europe/
its a windows executable file so you only have to launch it and follow instructions
alray said:
[email protected] said:
before you flash the ruu, I would recommend to try a factory reset first and then check for update again. Backup everything before as both the RUU and Factory reset will wipe your phone.
The ruu can be found here: http://www.htc1guru.com/2014/03/android-ruu-europe/
its a windows executable file so you only have to launch it and follow instructions
Click to expand...
Click to collapse
i did a factory reset but nothing happened
Click to expand...
Click to collapse
[email protected] said:
i did a factory reset but nothing happened
Click to expand...
Click to collapse
so go ahead and try to update to 4.19.401.9 using the ruu and see if you can get update notification from there. remember that the ruu will wipre everything on your phone, like if it was brand new so backup your files before!
alray said:
[email protected] said:
so go ahead and try to update to 4.19.401.9 using the ruu and see if you can get update notification from there. remember that the ruu will wipre everything on your phone, like if it was brand new so backup your files before!
Click to expand...
Click to collapse
is it ok to update with s-on ?
Click to expand...
Click to collapse
[email protected] said:
is it ok to update with s-on ?
Click to expand...
Click to collapse
Yes
but with s-on, you can only update, you can't downgrade back.
And btw if you are considering to achieve s-off, might be a better idea to achieve it now, before updating. S-off is harder to achieve on newer versions.
alray said:
[email protected] said:
Yes
but with s-on, you can only update, you can't downgrade back.
And btw if you are considering to achieve s-off, might be a better idea to achieve it now, before updating. S-off is harder to achieve on newer versions.
Click to expand...
Click to collapse
last question ... how can i apply the update ?
Click to expand...
Click to collapse
[email protected] said:
last question ... how can i apply the update ?
Click to expand...
Click to collapse
read post 10 and 12 again?
alray said:
[email protected] said:
before you flash the ruu, I would recommend to try a factory reset first and then check for update again. Backup everything before as both the RUU and Factory reset will wipe your phone.
The ruu can be found here: http://www.htc1guru.com/2014/03/android-ruu-europe/
its a windows executable file so you only have to launch it and follow instructions
Click to expand...
Click to collapse
its .exe and i don't know how to flash it !!
Click to expand...
Click to collapse
[email protected] said:
its .exe and i don't know how to flash it !!
Click to expand...
Click to collapse
Post #10:
alray said:
before you flash the ruu, I would recommend to try a factory reset first and then check for update again. Backup everything before as both the RUU and Factory reset will wipe your phone.
The ruu can be found here: http://www.htc1guru.com/2014/03/android-ruu-europe/
its a windows executable file so you only have to launch it and follow instructions
Click to expand...
Click to collapse
Hi
I have Unlocked Bootloader, S-Off and SuperCID, installed GPE ROM via RUU.zip
Now I need to install ROM via RUU. exe but I don't see superCID on supported CID list.
Will stock GPE ROM boot with CID HTC__032?
Or... Can I flash this RUU on superCID?
This RUU is here:
http://bit.ly/1EPvdwI
Super CID will help you or better have same CID as gpe have
Because ruu checks CID & MID and can give errors
ok. I changed it to HTC__032 and RUU force closes during gathering device information on Windows 7.
On Windows 8 fastboot crashes :/
all systems are 64-bit
But... If I have GPE ROM and firmware 5.0.1 can I flash KitKat based ROM's eg ViperOne?
Gpe have CID like GOOGLE01 I'm not sure better search before changing
Your 032 certainly not help you use win 7
ViperOne need sense firmware GPE firmware not good
Bruce666 said:
ok. I changed it to HTC__032 and RUU force closes during gathering device information on Windows 7.
On Windows 8 fastboot crashes :/
all systems are 64-bit
But... If I have GPE ROM and firmware 5.0.1 can I flash KitKat based ROM's eg ViperOne?
Click to expand...
Click to collapse
read and do this, I was having the same problem: http://forums.androidcentral.com/ht...tall-4-3-ruu-windows-7-8-1-a.html#post3466555
you must install all of them one at a time with reboots inbetween each, and if you have a full RUU make sure your MID also matches, you may also have to flash the corresponding sense firmware first.
yatindroid said:
Gpe have CID like GOOGLE01 I'm not sure better search before changing
Your 032 certainly not help you use win 7
ViperOne need sense firmware GPE firmware not good
Click to expand...
Click to collapse
so... what can I do? now I have CID HTC__032 and this ROM.
RUU exe crashes, fastboot crashes. What can I do? Guru reset won't work in this case when I have GPE firmware?
Bruce666 said:
so... what can I do? now I have CID HTC__032 and this ROM.
RUU exe crashes, fastboot crashes. What can I do? Guru reset won't work in this case when I have GPE firmware?
Click to expand...
Click to collapse
Are you able to post your fastboot getvar all ?
Seanie280672 said:
Are you able to post your fastboot getvar all ?
Click to expand...
Click to collapse
yes no problem
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.30.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.1700.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:XXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4193mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e135dbf9
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.115s
Bruce666 said:
yes no problem
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.30.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.1700.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:XXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4193mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e135dbf9
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.115s
Click to expand...
Click to collapse
Thanks, do NOT at any point go s-on, you need to flash the stock sense firmware first then run the RUU
http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One/401/
you need 4.19.401.9
Because you are s-off you will not need to re-lock the bootloader nor lock it, just run the RUU whilst your phone is still in fastbootUSB mode straight after the firmware flash.
Seanie280672 said:
Thanks, do NOT at any point go s-on, you need to flash the stock sense firmware first then run the RUU
http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One/401/
you need 4.19.401.9
Click to expand...
Click to collapse
and fastboot will not crash? I'm very afraid about it
Bruce666 said:
and fastboot will not crash? I'm very afraid about it
Click to expand...
Click to collapse
When is fastboot crashing ?
Seanie280672 said:
When is fastboot crashing ?
Click to expand...
Click to collapse
in the last step. after copying in stage 1/5 fastboot crashes. Memory is untouched
Bruce666 said:
in the last step. after copying in stage 1/5 fastboot crashes. Memory is untouched
Click to expand...
Click to collapse
no it shouldnt crash, its a different type of fastboot kind of................basically when you install an RUU, the software is installed first and the last thing the RUU does is flash the firmware, however, because you have GPE firmware on your phone, the software install is failing, only way around it is to flash the firmware first, see here: http://forum.xda-developers.com/showthread.php?t=2733523 don't follow this guide, its just to give you an idea of what we are doing.
To flash a firmware you must be in bootloader/fastbootUSB mode.
Fastboot oem rebootRUU
Fastboot flash zip firmwarefilename.zip
Then again
Fastboot flash zip firmwarefilename.zip (there will be some nerving pauses, just let it run, make sure it says successful before the next command) then:
Fastboot reboot-bootloader
Run RUU now..........
Seanie280672 said:
no it shouldnt crash, its a different type of fastboot kind of................basically when you install an RUU, the software is installed first and the last thing the RUU does is flash the firmware, however, because you have GPE firmware on your phone, the software install is failing, only way around it is to flash the firmware first, see here: http://forum.xda-developers.com/showthread.php?t=2733523
To flash a firmware you must be in bootloader/fastbootUSB mode.
Fastboot oem rebootRUU
Fastboot flash zip firmwarefilename.zip
Then again
Fastboot flash zip firmwarefilename.zip (there will be some nerving pauses, just let it run, make sure it says successful before the next command) then:
Fastboot reboot-bootloader
Run RUU now..........
Click to expand...
Click to collapse
ok but this is RUU.exe not zip. is flashing firmware wiping all data?
Bruce666 said:
ok but this is RUU.exe not zip. is flashing firmware wiping all data?
Click to expand...
Click to collapse
you need to download the firmware file from the link I gave you earlier: 4.19.401.9 firmware, put it in the same folder as fastboot files, then boot your phone to fastbootUSB mode and follow the commands above.
heres the link again: http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One/401/
the RUU will wipe your phone when you install it.
Seanie280672 said:
you need to download the firmware file from the link I gave you earlier: 4.19.401.9 firmware, put it in the same folder as fastboot files, then boot your phone to fastbootUSB mode and follow the commands above.
the RUU will wipe your phone when you install it.
Click to expand...
Click to collapse
ok. but will ROM I have flashed boot on this Firmware? coz I have RUU.exe
Bruce666 said:
ok. but will ROM I have flashed boot on this Firmware? coz I have RUU.exe
Click to expand...
Click to collapse
Run the RUU.exe after you have flashed the firmware, after the firmware and the RUU, you will be back on stock Sense, remember to flash the firmware twice, follow the commands above
Seanie280672 said:
Run the RUU.exe after you have flashed the firmware, after the firmware and the RUU, you will be back on stock Sense, remember to flash the firmware twice, follow the commands above
Click to expand...
Click to collapse
ok. but will ROM i have boot on this firmware?
Bruce666 said:
ok. but will ROM i have boot on this firmware?
Click to expand...
Click to collapse
what rom do you have ?
Seanie280672 said:
what rom do you have ?
Click to expand...
Click to collapse
I have this ROM
http://forum.xda-developers.com/htc-one/development/rom-google-play-edition-lollipop-v1-00-t2963927
I have tried updating the htc one m7 to lollipop and during installation phone went into recovery mode. this is the getvar log from device. currently i have an unlocked bootloader.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.07.1540.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4116mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
can some one guide on how to proceed forward?
One more issue is im unable to connect the phone to laptop. i have tried installing a custom ROM.
[email protected] said:
I have tried updating the htc one m7 to lollipop and during installation phone went into recovery mode. this is the getvar log from device. currently i have an unlocked bootloader.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.07.1540.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4116mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
can some one guide on how to proceed forward?
One more issue is im unable to connect the phone to laptop. i have tried installing a custom ROM.
Click to expand...
Click to collapse
its very easy to fix, all you have to do is run the dev edition RUU again to make sure everything is fully stock for the update to work, however, your real issue is the fact it wont connect to your laptop, why not ? whats it doing ? what does device manager say ?
Ok. Connecting to computer im least bothered. I need it to be up and running.
I have unlocked bootloader, installed TWRP 2.7.1.1. Where can i get the dev edition RUU? Can i just run it from system by connecting phone in fastboot?
[email protected] said:
Ok. Connecting to computer im least bothered. I need it to be up and running.
I have unlocked bootloader, installed TWRP 2.7.1.1. Where can i get the dev edition RUU? Can i just run it from system by connecting phone in fastboot?
Click to expand...
Click to collapse
your computer needs to see the phone whilst the phone is in fastboot mode in the bootloader for anything to work, but the the updated lollipop RUU is here: http://forum.xda-developers.com/htc-one/general/guide-convert-m7-developer-edition-t2840311
Yeah, system is able to read commands from fastboot. So i have follow the 2nd part of the link above?
[email protected] said:
Yeah, system is able to read commands from fastboot. So i have follow the 2nd part of the link above?
Click to expand...
Click to collapse
yes just the 2nd part as your already on dev edition, if it fails, you may have to download and install the firmware first, due to you running a custom recovery, you can find the firmware here, thanks to @alray https://www.androidfilehost.com/?w=files&flid=20283, you will want the 6.07.1540.2 firmware which matches your version main.
I have connected the device in fastboot and ran the RUU, but it failed saying Recovery, and then it exited the process on computer. But my phone is still in the same silver htc logo, does it mean its installing or it failed to install? And BTW how do i install that firmware and also there a few versions if the same firmware!
If you can help me with sorting out this it would be of great help!! Thanks in advance for all the help till now...
[email protected] said:
I have connected the device in fastboot and ran the RUU, but it failed saying Recovery, and then it exited the process on computer. But my phone is still in the same silver htc logo, does it mean its installing or it failed to install? And BTW how do i install that firmware and also there a few versions if the same firmware!
If you can help me with sorting out this it would be of great help!! Thanks in advance for all the help till now...
Click to expand...
Click to collapse
here you go, easy way, download this: https://www.androidfilehost.com/?fid=95897840722641610 rename it to rom.zip for ease
place it in the same folder as adb and fastboot on your computer, then open a command window there. first you need to get out of RUU mode, so type fastboot reboot-bootloader, your phone should return to the bootloader screen, then enter recovery on your phone, hopefully twrp recovery still, then type adb push rom.zip /sdcard/, takes a while but it will let you know when its done, it will look like its doing nothing whilst its pushing.
unplug your phone and flash the rom, select stock radio and stock recovery when prompted, when the phone starts back up, check for updates, as you are s-on your bootloader will need to be relocked to update.
Thanks man for the help.
let me try and install that thing. Need to know why to relock the boot loader? and how can i relock it?
[email protected] said:
Thanks man for the help.
let me try and install that thing. Need to know why to relock the boot loader? and how can i relock it?
Click to expand...
Click to collapse
just type fastboot oem lock with your phone in fastboot mode, if you need to unlock in the future, just use the unlock token again or goto HTC Dev to get a new one.
Can i locck it belore running RUU or flashing rom?
[email protected] said:
Can i locck it belore running RUU or flashing rom?
Click to expand...
Click to collapse
no, it needs to be unlocked for flashing the reset rom in order to use the custom recovery.
locked / re-locked for running RUU
C:\Users\USER\Desktop\OneDrivers_Fastboot\Fastboot>adb push rom.zip /sdcard/
error: device not found
Im getting this on pushing from recovery mode. How can i resolve this?
[email protected] said:
C:\Users\USER\Desktop\OneDrivers_Fastboot\Fastboot>adb push rom.zip /sdcard/
error: device not found
Im getting this on pushing from recovery mode. How can i resolve this?
Click to expand...
Click to collapse
when your phone is in recovery, have a look in device manager, see what it says for your phone ?
Its not able to find my device properly. Attaching it
[email protected] said:
Its not able to find my device properly. Attaching it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=52135024
See Question (2 in this faq post to fix your drivers
That worked great man!! I have pushed it to device and now installing.
Its been 10 mins and i can still see the Installing bar running with 0.00%.. Is it correct or abnormal?
[email protected] said:
That worked great man!! I have pushed it to device and now installing.
Its been 10 mins and i can still see the Installing bar running with 0.00%.. Is it correct or abnormal?
Click to expand...
Click to collapse
no that doesnt sound right, has it done anything in aroma, like wipe partitions etc ?
Seanie280672 said:
your computer needs to see the phone whilst the phone is in fastboot mode in the bootloader for anything to work, but the the updated lollipop RUU is here: http://forum.xda-developers.com/htc-one/general/guide-convert-m7-developer-edition-t2840311
Click to expand...
Click to collapse
Seanie280672 said:
no that doesnt sound right, has it done anything in aroma, like wipe partitions etc ?
Click to expand...
Click to collapse
I have choose to wipe partition. Shall i not?
[email protected] said:
I have choose to wipe partition. Shall i not?
Click to expand...
Click to collapse
yes you should, but has the aroma installer done that part yet is what im asking ?