Hey!
I know there are lots of threads on this topic but almost all of them are for devices which are either rooted or unlocked or S OFF etc. My device is completely stock, I've not rooted it, I've not unlocked bootloader and I've not made it S-OFF. However when I try to update to Lollipop I'm getting the red exclamation mark error and I checked the error log and it says :
"/system/app/PlusOne.apk has unexpected contents" and the installation aborts.
Click to expand...
Click to collapse
What do I do about this? I won't be able to root/S OFF my phone anytime soon as flashing RUU's doesn't seem likely. Is there any solution at all?!
Any help would be wonderful!
Thanks!
And also, every time I try to update the the error occurs, I need to re download the update when the system restarts. Isn't there a way to prevent this? It's a waste of bandwidth
wr8_utd said:
Hey!
I know there are lots of threads on this topic but almost all of them are for devices which are either rooted or unlocked or S OFF etc. My device is completely stock, I've not rooted it, I've not unlocked bootloader and I've not made it S-OFF. However when I try to update to Lollipop I'm getting the red exclamation mark error and I checked the error log and it says :
What do I do about this? I won't be able to root/S OFF my phone anytime soon as flashing RUU's doesn't seem likely. Is there any solution at all?!
Any help would be wonderful!
Thanks!
Click to expand...
Click to collapse
post your fastboot getvar all without imei and serial number please.
Seanie280672 said:
post your fastboot getvar all without imei and serial number please.
Click to expand...
Click to collapse
I don't have access to data connection right now so I can't download and try install right now but I'll post what error I get when I press Volume up and then Power Button on the red exclamation mark screen. It goes something like this :
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Verifying current system...
"/system/app/PlusOne.apk" has unexpected contents.
Installation aborted.
Click to expand...
Click to collapse
Thanks for the reply :good:
wr8_utd said:
I don't have access to data connection right now so I can't download and try install right now but I'll post what error I get when I press Volume up and then Power Button on the red exclamation mark screen. It goes something like this :
Thanks for the reply :good:
Click to expand...
Click to collapse
you will need to post your fastboot getvar all as soon as possible, the error you are getting is possible on any phone, and no help, it just states that apk file on your phone isnt as expected, the getvar will narrow it down to software version, region, phone model etc.
if your not sure how to do it here is a good guide http://droider.eu/2013/10/28/using-...to-get-more-information-about-your-htc-phone/ you dont need a data connection, just a computer, your phone and the usb lead.
BTW if you dont want to have to keep downloading the ota, when it finishes downloading, select install later, plug your phone into your computer and copy the OTA.zip file from your internal storage/downloads folder to your computer desktop.
Seanie280672 said:
you will need to post your fastboot getvar all as soon as possible, the error you are getting is possible on any phone, and no help, it just states that apk file on your phone isnt as expected, the getvar will narrow it down to software version, region, phone model etc.
if your not sure how to do it here is a good guide http://droider.eu/2013/10/28/using-...to-get-more-information-about-your-htc-phone/ you dont need a data connection, just a computer, your phone and the usb lead.
BTW if you dont want to have to keep downloading the ota, when it finishes downloading, select install later, plug your phone into your computer and copy the OTA.zip file from your internal storage/downloads folder to your computer desktop.
Click to expand...
Click to collapse
Thank you once again for the prompt reply.
Okay so I'm at work right now but the minute I'm home, I'll upload this getvar you need. I just run to run fastboot getvar right. No need to try run the OTA again?
wr8_utd said:
Thank you once again for the prompt reply.
Okay so I'm at work right now but the minute I'm home, I'll upload this getvar you need. I just run to run fastboot getvar right. No need to try run the OTA again?
Click to expand...
Click to collapse
yeah just run the command
Code:
fastboot getvar all
you can then either copy and paste the contents out the output here or take a screen shot of it, just make sure you remove the following information before posting it, your imei number and your serial number, those are 2 details you want to keep to yourself, post the rest of it and that will tell us all about your phone, full model, region, carrier, hboot info, current software, firmware, current security state of the nand chip, battery info etc.
Any of us can then help you fix your phone once we've got this ifo.
Seanie280672 said:
yeah just run the command
Code:
fastboot getvar all
you can then either copy and paste the contents out the output here or take a screen shot of it, just make sure you remove the following information before posting it, your imei number and your serial number, those are 2 details you want to keep to yourself, post the rest of it and that will tell us all about your phone, full model, region, carrier, hboot info, current software, firmware, current security state of the nand chip, battery info etc.
Any of us can then help you fix your phone once we've got this ifo.
Click to expand...
Click to collapse
Hey! Here you go with the getvar :
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.28.3218.04
version-cpld: None
version-microp: None
version-main: 6.13.707.107
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__038
battery-status: good
battery-voltage: 4050mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Anyone can help me with how to proceed now? Thanks!
@Seanie280672 any ideas?
wr8_utd said:
Hey! Here you go with the getvar :
Anyone can help me with how to proceed now? Thanks!
Click to expand...
Click to collapse
follow my signature download reset rom 6.13.707.106 flash it with twrp with stock recovery and radio options reboot
Check update 6.13.707.107 update it
Try this maybe it works but not 100% sure
yatindroid said:
follow my signature download reset rom 6.13.707.106 flash it with twrp with stock recovery and radio options reboot
Check update 6.13.707.107 update it
Try this maybe it works but not 100% sure
Click to expand...
Click to collapse
That would require a rooted device right. I dont have that. Is there any other solution?
wr8_utd said:
That would require a rooted device right. I dont have that. Is there any other solution?
Click to expand...
Click to collapse
NO root not needed
I made reset rom for 6.13.707.107 also if you need that check your message
I updated my stock M7 to official lollipop last week. For some reason I can't seem to change the background color of the app list from Blue back to Black. Tried changing the themes but got nowhere. Anyone knows how to?
http://i775.photobucket.com/albums/...2qssp_edit_1428330469171.png_zpsczblrmnd.jpeg
ronsan13 said:
I updated my stock M7 to official lollipop last week. For some reason I can't seem to change the background color of the app list from Blue back to Black. Tried changing the themes but got nowhere. Anyone knows how to?
http://i775.photobucket.com/albums/...2qssp_edit_1428330469171.png_zpsczblrmnd.jpeg
Click to expand...
Click to collapse
this is sense home app update
Go to theme app and change it you can choose wallpaper for it
Can anyone help?
wr8_utd said:
Can anyone help?
Click to expand...
Click to collapse
what help ?at least ask your Q
Help with letting me update my phone to Lollipop. The same error keeps popping up. Isn't there anyway to just get rid of the PlusOne.apk?
wr8_utd said:
Help with letting me update my phone to Lollipop. The same error keeps popping up. Isn't there anyway to just get rid of the PlusOne.apk?
Click to expand...
Click to collapse
follow my signature and find 7.21.707.105 ruu link and flash that
All data will be wipe backup first
Related
Hi all,
Changed from Samsung S2 to HTC one and installed custom ROM. My kid pulled the USB cable in the middle of something and after that I was stuck in boot. Trying to flash an RUU I re-locked the phone and now I am stuck there. I really tried to find the answer in other threads and it feels I am close (to knowing either how to solve this or get to know it is impossible), but I am not quite there:
Situation:
Tampered-relocked-security warning (comes and goes strangely enough)
S-On
HBOOT 1.44
eMMC-boot
May 3, 2013
Fastboot USB
Problem: whatever I try to do, my PC says there is no device. I installed HTC sync manager but it can not find my phone. It was in USB debugging before the loop....and now I do not know what to do.
Any suggestions for not making 2014 my worst phone-starting year ever....?
cdresor said:
Hi all,
Changed from Samsung S2 to HTC one and installed custom ROM. My kid pulled the USB cable in the middle of something and after that I was stuck in boot. Trying to flash an RUU I re-locked the phone and now I am stuck there. I really tried to find the answer in other threads and it feels I am close (to knowing either how to solve this or get to know it is impossible), but I am not quite there:
Situation:
Tampered-relocked-security warning (comes and goes strangely enough)
S-On
HBOOT 1.44
eMMC-boot
May 3, 2013
Fastboot USB
Problem: whatever I try to do, my PC says there is no device. I installed HTC sync manager but it can not find my phone. It was in USB debugging before the loop....and now I do not know what to do.
Any suggestions for not making 2014 my worst phone-starting year ever....?
Click to expand...
Click to collapse
can you post results from
fastboot getvar all
minus your iemi and serial no
you run it from the bootloader screen you posted above
getvar
clsA said:
can you post results from
fastboot getvar all
minus your iemi and serial no
you run it from the bootloader screen you posted above
Click to expand...
Click to collapse
Thanks. First I got "no device", but I drained the battery (because nothing happened when plugging/unplugging the USB cable), reinstalled drivers on my PC and reconnected the HTC. I got security warning again but I guess it sees my phone, because getvar worked:
bootloader version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.14.3250.13
version-clpd: None
version-microp: None
version-main: 1.29.401.16
version-misc: PUT SHIP S-ON
serialno:
imei:
meid: 000000000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC_Y13
battery-status: low
battery-voltage: 3286 mV
partition-layout: Generic
security: on
build-mode: ship
boot-mode: fastboot
getvar: all FAILED (status read failed (too many links))
finished. Total time 5.188s
Similar position, help me too please
my device HTC 802d china telecom, am based in china, running 4.2.2 upgrade 4.3 available
my phone says
TAMPERED
RELOCKED
SECURITY WARNING - this comes and goes
Phone working well, htc sync manager work well
when i go to bootloader then fastboot, it says fastboot usb but fastboot or adb says no device
pc not detect my phone from bootloader, kindly help
sureshnv said:
my device HTC 802d china telecom, am based in china, running 4.2.2 upgrade 4.3 available
my phone says
TAMPERED
RELOCKED
SECURITY WARNING - this comes and goes
Phone working well, htc sync manager work well
when i go to bootloader then fastboot, it says fastboot usb but fastboot or adb says no device
pc not detect my phone from bootloader, kindly help
Click to expand...
Click to collapse
I will get back to you if I find out what was wrong. Right now though I dare not to touch my phone until I see which help I can get from this forum. My HTC Sync manager says I have no device, most commands say no device but still I got getvar info. So I do not quite understand all of this....but hopefully I will get there. Good luck!
cdresor said:
I will get back to you if I find out what was wrong. Right now though I dare not to touch my phone until I see which help I can get from this forum. My HTC Sync manager says I have no device, most commands say no device but still I got getvar info. So I do not quite understand all of this....but hopefully I will get there. Good luck!
Click to expand...
Click to collapse
yeah we can get you their - Uninstall HTC Sync manager but leave the drivers (it will ask during uninstall)
the date in the bootloader indicates Revone should work to s-off your phone as I can see your on hboot 1.44
Try to get s-off >> http://forum.xda-developers.com/showthread.php?t=2314582
while your reading Download this
http://www.htc1guru.com/dld/ruu-zip...0-01_release_318486_signed_2_4_decrypted-zip/
next step is this from @nkk71
Step 2: Flash your RUU.zip
Download your MID & CID compatible RUU.zip
Rename the downloaded file to ruu.zip (careful about ruu.zip.zip in Windows)
In bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes TWICE, the first one will report “failed flush again”, the second one will succeed.
fastboot reboot-bootloader
Click to expand...
Click to collapse
if you're having problems with revone, use the following rom: http://forum.xda-developers.com/showpost.php?p=48955645&postcount=250
clsA said:
yeah we can get you their - Uninstall HTC Sync manager but leave the drivers (it will ask during uninstall)
the date in the bootloader indicates Revone should work to s-off your phone as I can see your on hboot 1.44
Try to get s-off >> http://forum.xda-developers.com/showthread.php?t=2314582
while your reading Download this
http://www.htc1guru.com/dld/ruu-zip...0-01_release_318486_signed_2_4_decrypted-zip/
next step is this from @nkk71
Click to expand...
Click to collapse
Again, thanks for replying.
I uninstalled HTC Sync manager but it never asked about the drivers (I only got install/repair/uninstall) so everything was deleted. I reinstalled.
Nevertheless, trying to push revone I simply got the message "error:device not found". I guess /data/local/tmp/ is the correct dir for my device, or can this be different on different machines somehow?
I am still downloading the ROM, hoping for help.....d/l takes a looong time so don´t hurry
cdresor said:
Again, thanks for replying.
I uninstalled HTC Sync manager but it never asked about the drivers (I only got install/repair/uninstall) so everything was deleted. I reinstalled.
Nevertheless, trying to push s-off I simply got the message "error:device not found". I guess /data/local/tmp/ is the correct dir for my device, or can this be different on different machines somehow?
I am still downloading the ROM, hoping for help.....d/l takes a looong time so don´t hurry
Click to expand...
Click to collapse
you need to be booted into custom recovery when you push with adb
cdresor said:
Again, thanks for replying.
I uninstalled HTC Sync manager but it never asked about the drivers (I only got install/repair/uninstall) so everything was deleted. I reinstalled.
Nevertheless, trying to push revone I simply got the message "error:device not found". I guess /data/local/tmp/ is the correct dir for my device, or can this be different on different machines somehow?
I am still downloading the ROM, hoping for help.....d/l takes a looong time so don´t hurry
Click to expand...
Click to collapse
strange, i always install sync manager, then go back to Control Panel -> Uninstall -> HTC Sync Manager
HTC Drivers stay just fine.
You can use those:
HTCDriver_4.8.0.002.exe 15.1 MB
https://mega.co.nz/#!TAcGAJ7L!YdWM4AIji95b1ow8kVgagggOx5Yh7csRN5G0KJaCo6w
you have to get adb working; you can check by typing "adb devices" either in custom recovery or booted-up ROM (USB debugging enabled), it should show your device serial number.
nkk71 said:
if you're having problems with revone, use the following rom: http://forum.xda-developers.com/showpost.php?p=48955645&postcount=250
Click to expand...
Click to collapse
Sorry for being stupid but will the ROM make my HTC S-Off (as the heading implies) or work with the current S-ON?
I still don´t understand how I am to flash it to my device when everything I do (except getvar) says "device not found". But I will try and might get out of this mess a little bit smarter than I was before.
Thanks!
cdresor said:
Sorry for being stupid but will the ROM make my HTC S-Off (as the heading implies) or work with the current S-ON?
I still don´t understand how I am to flash it to my device when everything I do (except getvar) says "device not found". But I will try and might get out of this mess a little bit smarter than I was before.
Thanks!
Click to expand...
Click to collapse
I would flash the RUU and skip s-off for now till you get your phone working again. From what your saying you don't even have custom recovery any more ?
cdresor said:
Sorry for being stupid but will the ROM make my HTC S-Off (as the heading implies) or work with the current S-ON?
I still don´t understand how I am to flash it to my device when everything I do (except getvar) says "device not found". But I will try and might get out of this mess a little bit smarter than I was before.
Thanks!
Click to expand...
Click to collapse
1- No, the ROM will not make you S-Off, but it's proven to be very compatible with revone
2- you install that using custom recovery (CWM or TWRP)
3- you'll still have to use the revone commands as mentioned in their thread
4- adb vs fastboot:
"fastboot devices" <- works in bootloader screen ONLY (the white screen)
"adb devices" <- works in a booted up ROM (with USB debugging enabled) or in custom recovery (CWM or TWRP), it does NOT work in bootloader
---------- Post added at 04:42 PM ---------- Previous post was at 04:36 PM ----------
cdresor said:
Sorry for being stupid but will the ROM make my HTC S-Off (as the heading implies) or work with the current S-ON?
I still don´t understand how I am to flash it to my device when everything I do (except getvar) says "device not found". But I will try and might get out of this mess a little bit smarter than I was before.
Thanks!
Click to expand...
Click to collapse
clsA said:
I would flash the RUU and skip s-off for now till you get your phone working again. From what your saying you don't even have custom recovery any more ?
Click to expand...
Click to collapse
+1, disregard my previous post, and go with @clsA recommendation of flashing ruu, to get your phone back up and running.
clsA said:
I would flash the RUU and skip s-off for now till you get your phone working again. From what your saying you don't even have custom recovery any more ?
Click to expand...
Click to collapse
Unfortunately you are quite right. I guess there is something fishy with my drivers although getvar gets info from my phone. And although Windows does not show any phone, in device manager there is a "My HTC" which is said to run correctly. Sigh.
I will try to get in contact with my phone and flash a ROM.
cdresor said:
Unfortunately you are quite right. I guess there is something fishy with my drivers although getvar gets info from my phone. And although Windows does not show any phone, in device manager there is a "My HTC" which is said to run correctly. Sigh.
I will try to get in contact with my phone and flash a ROM.
Click to expand...
Click to collapse
just do the stuff in post 6 and skip s-off for now
clsA said:
just do the stuff in post 6 and skip s-off for now
Click to expand...
Click to collapse
Getting there, getting there.....
First I just got "error opening". Changed the long name to "1.zip" and it seemed to work. Finished with these lines though:
writing "zip".....
(bootloader) signature checking....
FAILED (remote: 12 signature verify fail)
And back to where I was before. Should I just retry (download again) or do you have any further advice?
cdresor said:
Getting there, getting there.....
First I just got "error opening". Changed the long name to "1.zip" and it seemed to work. Finished with these lines though:
writing "zip".....
(bootloader) signature checking....
FAILED (remote: 12 signature verify fail)
And back to where I was before. Should I just retry (download again) or do you have any further advice?
Click to expand...
Click to collapse
did you md5 check the file you already have ?
clsA said:
did you md5 check the file you already have ?
Click to expand...
Click to collapse
Hrm...I never understood how I check md5 on my computer so I figured it was faster to d/l it again. I am happy something happens between my computer and the phone though.....I see the light in the tunnel. Hopefully not the headlight on a freight train.
cdresor said:
Thanks. First I got "no device", but I drained the battery (because nothing happened when plugging/unplugging the USB cable), reinstalled drivers on my PC and reconnected the HTC. I got security warning again but I guess it sees my phone, because getvar worked:
bootloader version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.14.3250.13
version-clpd: None
version-microp: None
version-main: 1.29.401.16
version-misc: PUT SHIP S-ON
serialno:
imei:
meid: 000000000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC_Y13
battery-status: low
battery-voltage: 3286 mV
partition-layout: Generic
security: on
build-mode: ship
boot-mode: fastboot
getvar: all FAILED (status read failed (too many links))
finished. Total time 5.188s
Click to expand...
Click to collapse
cdresor said:
Hrm...I never understood how I check md5 on my computer so I figured it was faster to d/l it again. I am happy something happens between my computer and the phone though.....I see the light in the tunnel. Hopefully not the headlight on a freight train.
Click to expand...
Click to collapse
1- I'm assuming you TYPED that getvar ^^ above correct!?!?! (because of the "mistyped" stuff in it)... please confirm!!!! EDIT:: even better, do a "fastboot getvar all" again, and copy/paste output, not typed
2- can you open the ruu.zip and post the contents "android-info.txt" (I could download it and check myself, but that would just take another 1 and half hours)
cdresor said:
Hrm...I never understood how I check md5 on my computer so I figured it was faster to d/l it again. I am happy something happens between my computer and the phone though.....I see the light in the tunnel. Hopefully not the headlight on a freight train.
Click to expand...
Click to collapse
md5 app
all you do is copy the long code of the md5 and the app will take it from the clipboard .. simply browse to the file your checking and it will go
If anyone has some time to spare, I could really use some individual guidance.
I just purchased a used HTC One, it had 4.1.2 on it and would not update so I unlocked it and rooted it.
Now though, I keep getting stuck no matter what I try...
I've been trying to get S Off, I have the 1.44 version of hboot I think it's called, and CWS_001 and PN0712000. I can't get S Off to work, even after updating to 4.2.2, now my wifi will not connect. I keep getting stuck in boot loop, or TWRP will not load. I've tripped the 'tamper' flag and would like to get rid of that.
I'm just not familiar enough with all the instructions to purposefully move from where I'm at to where I want to go. I would like to have 4.4 eventually and be unlocked and rooted with a custom ROM with no HTC overlay.
If there is any chance anyone would be willing to walk me through, I would greatly appreciate it. My S3 is working fine so I'm not desperate, but getting there quickly.
Thank you.
I've spent the last 12 hours going around in circles, my Chrome browser looks like 100 tabs are open across the top with all the pages I've been reading trying to figure this thing out. I feel like an idiot about now. Anyways, thanks to anybody for considering helping ahead of time.
bubsnews said:
If anyone has some time to spare, I could really use some individual guidance.
I just purchased a used HTC One, it had 4.1.2 on it and would not update so I unlocked it and rooted it.
Now though, I keep getting stuck no matter what I try...
I've been trying to get S Off, I have the 1.44 version of hboot I think it's called, and CWS_001 and PN0712000. I can't get S Off to work, even after updating to 4.2.2, now my wifi will not connect. I keep getting stuck in boot loop, or TWRP will not load. I've tripped the 'tamper' flag and would like to get rid of that.
I'm just not familiar enough with all the instructions to purposefully move from where I'm at to where I want to go. I would like to have 4.4 eventually and be unlocked and rooted with a custom ROM with no HTC overlay.
If there is any chance anyone would be willing to walk me through, I would greatly appreciate it. My S3 is working fine so I'm not desperate, but getting there quickly.
Thank you.
I've spent the last 12 hours going around in circles, my Chrome browser looks like 100 tabs are open across the top with all the pages I've been reading trying to figure this thing out. I feel like an idiot about now. Anyways, thanks to anybody for considering helping ahead of time.
Click to expand...
Click to collapse
You have an AT&T HTC one
it's very simple to update it to 4.3 >> Download This
all you need is this one file and read the instruction Here
clsA said:
You have an AT&T HTC one
it's very simple to update it to 4.3 >> Download This
all you need is this one file and read the instruction Here
Click to expand...
Click to collapse
Thank you! So, there is no requirement for root, locked/unlocked, previous/installed ROM etc??? Doesn't care what build of my HTC ONE or anything?
Sounds too good to be true.
Will I still be rooted and unlocked afterwards?
Is this a stock ROM?
Downloading now, thanks for the help.
bubsnews said:
Thank you! So, there is no requirement for root, locked/unlocked, previous/installed ROM etc??? Doesn't care what build of my HTC ONE or anything?
Sounds too good to be true.
Will I still be rooted and unlocked afterwards?
Is this a stock ROM?
Downloading now, thanks for the help.
Click to expand...
Click to collapse
It's not a Rom it's a RUU
It's full factory reset it wipes everything and updates the firmware
sent from my recliner
clsA said:
It's not a Rom it's a RUU
It's full factory reset it wipes everything and updates the firmware
sent from my recliner
Click to expand...
Click to collapse
"Sent from my recliner" Well played Sir...
I see by your signature, you are exactly where I want to be. I too have the CSW_001 version. I was up until 2 this morning messing with it so I'm 'off' for the night but will be up bright and early following your suggestion, thank you for that.
Might I still find you in your recliner should I happen to falter? I'm hoping that after this works, I can put my One in the same condition as yours, S Off etc...
Any further pointers on that score? You know exactly the state my One will be in after I get done with your previous advice.
Thanks again, I really appreciate your assistance.
Yeah I'll be here
sent from my recliner
clsA said:
Yeah I'll be here
Click to expand...
Click to collapse
Because ViperOne 5.0 is so new it's going to take a couple of steps for you to get to where I am.
I'm going to use @nkk71 SuperGuide from here http://forum.xda-developers.com/showthread.php?t=2541082.
Lets see If I can get this in the right order
First lets get all the files together before you start
Download
the RUU.exe
TWRP 2.6.3.3 >> http://techerrata.com/browse/twrp2/m7
Guru Bootloader Reset from here: http://www.htc1guru.com/dld/guru_boo...reset_1-0-zip/ (this is the thread http://forum.xda-developers.com/show....php?t=2527194)
Get Both rumrunner and firewater to get S-Off: http://firewater-soff.com/ and http://rumrunner.us/
I Recommend having ARHD 31.6 for Getting s-off >> http://xda7.androidrevolution.nl/db_mirror/ROMs/HTC_One/Android_Revolution_HD-One_31.6.zip
and finally download your ViperOne 5.0 Rom
I'm going to alter the steps somewhat from the above guide because of what you have already done to the phone.
as I understand it your already on 4.2.2 from 4.1.2 is this correct?
here's the steps using the above files
Run the 3.17.502.3 RUU for AT&T (don't bother setting up the phone much your going to loose everything in the next step)
Unlock the bootloader again @ HTCDEV.com
Reboot to bootloader (fastboot USB)- Flash the 2.6.3.3 TWRP Recovery
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
Boot into Recovery and flash ARHD 31.6 (again use minimal setup your not going to be here long)
Get S-off (rumrunner should work fine / or just go with firewater your choice)
next is the Guru reset to remove the Tampered flag ... don't lock the bootloader.
and last step is flash ViperOne 5.0 and Enjoy your new phone
Note: I typed most of this from memory and if I missed any important steps Please feel free to correct me @nkk71 :good:
clsA said:
Note: I typed most of this from memory and if I missed any important steps Please feel free to correct me @nkk71 :good:
Click to expand...
Click to collapse
Sounds good to me :good: :good: :laugh:
(there's also a ruu.zip just in case)
Good luck OP :fingers-crossed:
clsA said:
Because ViperOne 5.0 is so new it's going to take a couple of steps for you to get to where I am.
I'm going to use @nkk71 SuperGuide from here http://forum.xda-developers.com/showthread.php?t=2541082.
Lets see If I can get this in the right order
First lets get all the files together before you start
Download
the RUU.exe
TWRP 2.6.3.3 >> http://techerrata.com/browse/twrp2/m7
Guru Bootloader Reset from here: http://www.htc1guru.com/dld/guru_boo...reset_1-0-zip/ (this is the thread http://forum.xda-developers.com/show....php?t=2527194)
Get Both rumrunner and firewater to get S-Off: http://firewater-soff.com/ and http://rumrunner.us/
I Recommend having ARHD 31.6 for Getting s-off >> http://xda7.androidrevolution.nl/db_mirror/ROMs/HTC_One/Android_Revolution_HD-One_31.6.zip
and finally download your ViperOne 5.0 Rom
I'm going to alter the steps somewhat from the above guide because of what you have already done to the phone.
as I understand it your already on 4.2.2 from 4.1.2 is this correct?
here's the steps using the above files
Run the 3.17.502.3 RUU for AT&T (don't bother setting up the phone much your going to loose everything in the next step)
Unlock the bootloader again @ HTCDEV.com
Reboot to bootloader (fastboot USB)- Flash the 2.6.3.3 TWRP Recovery
Boot into Recovery and flash ARHD 31.6 (again use minimal setup your not going to be here long)
Get S-off (rumrunner should work fine / or just go with firewater your choice)
next is the Guru reset to remove the Tampered flag ... don't lock the bootloader.
and last step is flash ViperOne 5.0 and Enjoy your new phone
Note: I typed most of this from memory and if I missed any important steps Please feel free to correct me @nkk71 :good:
Click to expand...
Click to collapse
Wow, this is great! Just what I need, step by step by step. Like when the golfer hits something up there a couple of inches and the announcer proclaims, "Even I could make that putt." Thank you.
Now, I'm going to give you an opportunity to look your instructions over again while I'm downloading the V1 5.0 ROM (or, another RUU?) (What's the difference btw?) and the ARHD 31.6 file (I'm on lowly 12mb connection so going to take me 40 minutes) before I get started. I already had the other files.
I'm following your instructions blindly so if you've missed something, I'm hosed (I don't want to be hosed, tyvm).
Is that enough?
bubsnews said:
Wow, this is great! Just what I need, step by step by step. Like when the golfer hits something up there a couple of inches and the announcer proclaims, "Even I could make that putt." Thank you.
Now, I'm going to give you an opportunity to look your instructions over again while I'm downloading the V1 5.0 ROM (or, another RUU?) (What's the difference btw?) and the ARHD 31.6 file (I'm on lowly 12mb connection so going to take me 40 minutes) before I get started. I already had the other files.
I'm following your instructions blindly so if you've missed something, I'm hosed (I don't want to be hosed, tyvm).
Here are the particulars, phone state as of right now...
4.2.2
HTC Sense 5.0
CID CWS_001
MID PN0712000
Software MaximusHD 11.0.0
HTK SDK API 5.34
Kernel
3.4.10-g28df0d6
[email protected] #1
SMP PREEMPT
Baseband 4A.17.3250.20_10.441150.04L
Build 2.24.401.8 CL235216 release-keys
Browser WebKit/534.30
Is that enough?
Click to expand...
Click to collapse
Yeah the instruction are fine
run the RUU and get your bootloader unlocked and twrp installed while your downloading ARHD and viperOne
clsA said:
Yeah the instruction are fine
run the RUU and get your bootloader unlocked and twrp installed while your downloading ARHD and viperOne
Click to expand...
Click to collapse
Snag #1, ERROR [155]: UNKNOWN ERROR
Please get the correct TOM Update Utility and try again.
bubsnews said:
Snag #1, ERROR [155]: UNKNOWN ERROR
Please get the correct TOM Update Utility and try again.
Click to expand...
Click to collapse
post your results for fastboot getvar all ( - SerialNo and IEMI )
clsA said:
post your results for fastboot getvar all ( - SerialNo and IEMI )
Click to expand...
Click to collapse
Well, not sure what to do though, the error claims my phone should be in one of two states, either rebooted (no) or black screen with HTC logo and 4 exclamation marks in the corners of the screen (no either). I have the HTC logo but no exclamation points.
The options given by the program are EXIT if phone has rebooted or NEXT to start recovery process.
Not sure which I should choose...
bubsnews said:
Well, not sure what to do though, the error claims my phone should be in one of two states, either rebooted (no) or black screen with HTC logo and 4 exclamation marks in the corners of the screen (no either). I have the HTC logo but no exclamation points.
The options given by the program are EXIT if phone has rebooted or NEXT to start recovery process.
Not sure which I should choose...
Click to expand...
Click to collapse
Error 155 usually means your using the wrong RUU
which means you phone is not CID CWS_001
MID PN0712000. not sure how you got that info
Just exit the update utility
then post your "fastboot getvar all" ( excluding SerialNo and IEMI )
clsA said:
Error 155 usually means your using the wrong RUU
which means you phone is not CID CWS_001
MID PN0712000. not sure how you got that info
Click to expand...
Click to collapse
I can't remember exactly but I did run something and that was returned, I wrote it down.
I use Chrome (I've heard others having problems with Chrome and large file downloads) so I'm downloading that RUU again using IE.
I'm going to hit NEXT to start recovery process.
Will getvar once done, if I can...
I'm positive about the CWS_001 etc...
bubsnews said:
I can't remember exactly but I did run something and that was returned, I wrote it down.
I use Chrome (I've heard others having problems with Chrome and large file downloads) so I'm downloading that RUU again using IE.
I'm going to hit NEXT to start recovery process.
Will getvar once done, if I can...
I'm positive about the CWS_001 etc...
Click to expand...
Click to collapse
Stop !!
if your going to download again we need to change the file
post your getvar so we can continue
bubsnews said:
I can't remember exactly but I did run something and that was returned, I wrote it down.
I use Chrome (I've heard others having problems with Chrome and large file downloads) so I'm downloading that RUU again using IE.
I'm going to hit NEXT to start recovery process.
Will getvar once done, if I can...
I'm positive about the CWS_001 etc...
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.17.3250.20
version-cpld: None
version-microp: None
version-main: 1.26.502.15
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: CWS__001
battery-status: good
battery-voltage: 4311mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: RUU
bubsnews said:
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.17.3250.20
version-cpld: None
version-microp: None
version-main: 1.26.502.15
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: CWS__001
battery-status: good
battery-voltage: 4311mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: RUU
Click to expand...
Click to collapse
ok 2 things did you MD5 check the the RUU.exe ?
and did you hard reboot the phone after the RUU failed
it looks like it's still in RUU mode (last line in your getvar)
clsA said:
ok 2 things did you MD5 check the the RUU.exe ?
and did you hard reboot the phone after the RUU failed
it looks like it's still in RUU mode (last line in your getvar)
Click to expand...
Click to collapse
I did not check MD5 (I know I've done that before but not very familiar, instructions?) (I am downloading that file again with IE, almost done).
I did not reboot the phone, only exited the program as instructed and ran getvar.
Hi guys, yesterday my htc one downloaded android 4.4.2 update(4.19.401.11) which is about 308.24 MB. I had TWRP system recovery so i flashed the stock recovery and tried to install the update but after few minutes the progress bar stoped and the green phone logo turned red than i tried to reboot it again show phone is ready to update, i again tried to install and again same happened but this time i left it on that red logo. while in that red logo(maybe warning signal) i left it as it is and after few minutes it rebooted and this time it said new update available to download(the ota update from downloads folder was deleted). I don't know whats going wrong, my current software version in 3.62.401.1( android 4.3 with htc sense 5.5).. I m rooted and also s-off. Please someone help!!
suyash1629 said:
Hi guys, yesterday my htc one downloaded android 4.4.2 update(4.19.401.11) which is about 308.24 MB. I had TWRP system recovery so i flashed the stock recovery and tried to install the update but after few minutes the progress bar stoped and the green phone logo turned red than i tried to reboot it again show phone is ready to update, i again tried to install and again same happened but this time i left it on that red logo. while in that red logo(maybe warning signal) i left it as it is and after few minutes it rebooted and this time it said new update available to download(the ota update from downloads folder was deleted). I don't know whats going wrong, my current software version in 3.62.401.1( android 4.3 with htc sense 5.5).. I m rooted and also s-off. Please someone help!!
Click to expand...
Click to collapse
Try it again and this time when the green logo turns red, hold down volume up and press power button while holding volume up, the recovery log should appear , post the error msg that it shows here (you might have to try pressing volume up, volume down and power button for recovery log to appear, you'll have to get the timing right)
muhammad.uzi1994 said:
Try it again and this time when the green logo turns red, hold down volume up and press power button while holding volume up, the recovery log should appear , post the error msg that it shows here (you might have to try pressing volume up, volume down and power button for recovery log to appear, you'll have to get the timing right)
Click to expand...
Click to collapse
The update is being downloaded again, as soon as it finishes i will do it again and i will try to get the recovery log..
suyash1629 said:
The update is being downloaded again, as soon as it finishes i will do it again and i will try to get the recovery log..
Click to expand...
Click to collapse
Okay
muhammad.uzi1994 said:
Okay
Click to expand...
Click to collapse
Recovery Log:
Code:
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Warning: No file_contextsVerifying current system...
"/system/framework/core.odex" has unexpected contents.
Installation aborted.
Do you have any idea why is this happening? I tried opening the ota package in my computer, and in there firmware.zip was not opening. It says the compressed folder is invalid.
suyash1629 said:
Recovery Log:
Code:
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Warning: No file_contextsVerifying current system...
"/system/framework/core.odex" has unexpected contents.
Installation aborted.
Do you have any idea why is this happening? I tried opening the ota package in my computer, and in there firmware.zip was not opening. It says the compressed folder is invalid.
Click to expand...
Click to collapse
No, mate, I don't know about this error, Maybe @nkk71 knows, better wait to see what he thinks about this . Are you rooted? Have you ever modified your OS by deleting any system apps?
muhammad.uzi1994 said:
No, mate, I don't know about this error, Maybe @nkk71 knows, better wait to see what he thinks about this . Are you rooted? Have you ever modified your OS by deleting any system apps?
Click to expand...
Click to collapse
i m rooted but not modified system apps or deleted them. but this firmware file does not contain "/system/framework/core.odex" and also firmware.zip doesn't open.. i dont think so, rooting effects the update because last time i updated to 4.3 while i was rooted.
suyash1629 said:
i m rooted but not modified system apps or deleted them. but this firmware file does not contain "/system/framework/core.odex" and also firmware.zip doesn't open.. i dont think so, rooting effects the update because last time i updated to 4.3 while i was rooted.
Click to expand...
Click to collapse
I got no ideas about this, you should wait for nkk71 or @alray
suyash1629 said:
i m rooted but not modified system apps or deleted them. but this firmware file does not contain "/system/framework/core.odex" and also firmware.zip doesn't open.. i dont think so, rooting effects the update because last time i updated to 4.3 while i was rooted.
Click to expand...
Click to collapse
1- firmware.zip won't open with Windows Explorer because it's a signed firmware package, this is expected
2- "/system/framework/core.odex" has unexpected contents -> it's either not there or not stock, the OTA will not go through, if all the conditions are not met 100%
nkk71 said:
1- firmware.zip won't open with Windows Explorer because it's a signed firmware package, this is expected
2- "/system/framework/core.odex" has unexpected contents -> it's either not there or not stock, the OTA will not go through, if all the conditions are not met 100%
Click to expand...
Click to collapse
is there any solution for updating?
suyash1629 said:
is there any solution for updating?
Click to expand...
Click to collapse
1- please post a "fastboot getvar all" excluding IMEI and s/n
2- are you using any mods? (such as Xposed)?
3- why stay on stock ROM?
suyash1629 said:
is there any solution for updating?
Click to expand...
Click to collapse
If you're s off, try running an RUU for your cid and mid and then take ota , because somewhere along the way, I think you accidentally modified your system settings
nkk71 said:
1- please post a "fastboot getvar all" excluding IMEI and s/n
2- are you using any mods? (such as Xposed)?
3- why stay on stock ROM?
Click to expand...
Click to collapse
1. "fastboot getvar all" result:
Code:
version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main: 3.62.401.1
version-misc: PVT SHIP S-OFF
serialno: XXXXXXXXXXXX
imei: XXXXXXXXXXXXXX
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__001
battery-status: good
battery-voltage: 4002mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-bb768ae1
hbootpreupdate: 11
gencheckpt: 0
2. never used any mods or exposed framework but its rooted. Last time I restored to factory state using Guru_Reset_M7_2.24.401.1.zip and updated than i s-off using rumrunner_HTC_0.5.0 and locked the bootloader and today i again unlocked the bootloader using adb shell method from the computer(i have done this before too).
3. I dont understand what you mean by this question? i u mean why are you staying on stoke firmware than my answer is i m already using different roms and mods in my galaxy s and galaxy s3, so i thought at-least one phone should be in stock..
muhammad.uzi1994 said:
If you're s off, try running an RUU for your cid and mid and then take ota , because somewhere along the way, I think you accidentally modified your system settings
Click to expand...
Click to collapse
I could do that even earlier than you said but i dont want to factory reset my phone.. can i flash the core.odex of my guru reset? because that file is missing from my phone(i think that missing file is creating the issue)
suyash1629 said:
I could do that even earlier than you said but i dont want to factory reset my phone.. can i flash the core.odex of my guru reset? because that file is missing from my phone(i think that missing file is creating the issue)
Click to expand...
Click to collapse
Two of the guru roms that I tried on my phone were faulty and didn't let me take ota, the solution that worked for me was running a downgrade ruu , it could be that the guru Rom isn't accurate, read this http://forum.xda-developers.com/showthread.php?t=2682363
muhammad.uzi1994 said:
Two of the guru roms that I tried on my phone were faulty and didn't let me take ota, the solution that worked for me was running a downgrade ruu , it could be that the guru Rom isn't accurate, read this http://forum.xda-developers.com/showthread.php?t=2682363
Click to expand...
Click to collapse
But that guru reset has that core.odex and after installing that guru reset i was able to take the ota update to 3.62.401.1(android 4.3)
suyash1629 said:
But that guru reset has that core.odex and after installing that guru reset i was able to take the ota update to 3.62.401.1
Click to expand...
Click to collapse
Then install the guru Rom again, take Ota to 3.xx, then take the next ota to 4.xx. maybe you just modified the system core.odex thing, installing the guru Rom again and retaking ota should work
muhammad.uzi1994 said:
Then install the guru Rom again, take Ota to 3.xx, then take the next ota to 4.xx. maybe you just modified the system core.odex thing, installing the guru Rom again and retaking ota should work
Click to expand...
Click to collapse
Maybe @nkk71 might have some other way to fix this.. if there is nothing i can do than only i will go that way..
suyash1629 said:
But that guru reset has that core.odex and after installing that guru reset i was able to take the ota update to 3.62.401.1(android 4.3)
Click to expand...
Click to collapse
get the missing/changed file from http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
or just dirty flash it without root, then install OTA, and re-root
nkk71 said:
get the missing/changed file from http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
or just dirty flash it without root, then install OTA, and re-root
Click to expand...
Click to collapse
Can i only flash that core.odex file? i dont want to download that huge file because i have slow internet speed. i can transfer that to my website server extract it there any download only core.odex file(doing this will only take few minutes because my website server possibly could download within minutes). or do i have to flash whole guru reset?
My HTC One decided suddenly to not wake up this morning even though I had left it at 80 percent charge before I went to sleep. I put it to charge for 8 hours and when I came back, it still would not turn on. I can only get into the fastboot menu but my computer will not recognize my phone whatsoever- it says android 1.0 on my windows 7 computer. I know all of the correct drivers are installed because this is the same computer I used to root my phone. I am rooted with ARHD and TWRP. I have also tried holding the volume and power under a bright light and I can only get into the fastboot. Whenever I try to enter recovery, it gets stock on the "entering recovery" sign and when I try to boot the phone, it gets stuck on the splash screen.
I have not changed anything to my phone in the last month or so and this comes completely at random.
Any and all help will be greatly appreciated. Thanks!
EDIT: I can only get fastboot connectivity. Not ADB
xeron72548 said:
My HTC One decided suddenly to not wake up this morning even though I had left it at 80 percent charge before I went to sleep. I put it to charge for 8 hours and when I came back, it still would not turn on. I can only get into the fastboot menu but my computer will not recognize my phone whatsoever- it says android 1.0 on my windows 7 computer. I know all of the correct drivers are installed because this is the same computer I used to root my phone. I am rooted with ARHD and TWRP. I have also tried holding the volume and power under a bright light and I can only get into the fastboot. Whenever I try to enter recovery, it gets stock on the "entering recovery" sign and when I try to boot the phone, it gets stuck on the splash screen.
I have not changed anything to my phone in the last month or so and this comes completely at random.
Any and all help will be greatly appreciated. Thanks!
Click to expand...
Click to collapse
post your getvar all/bootloader information please
moha_moha20106 said:
post your getvar all/bootloader information please
Click to expand...
Click to collapse
Here it is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.1540.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA34MW908198
(bootloader) imei: #################### (done intentionally)
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3716mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.062s
I can get fastboot connectivity but no ADB connectivity
xeron72548 said:
I can't get any of that because my phone isn't being picked up by my computer. I don't think it's a driver issue because this is the same computer i used to root the phone.
Click to expand...
Click to collapse
I've had the same problem
I could solve the problem by pushing the power button for few seconds until the buttom start blinking while I was trying to enter the recovery
probably this helps you
xeron72548 said:
I can't get any of that because my phone isn't being picked up by my computer. I don't think it's a driver issue because this is the same computer i used to root the phone.
Click to expand...
Click to collapse
can you check FAQ #2 in my guide if that's the problem.
try nkk71 method, it will resolve your problem
this is your correct RUU.exe
PS: @ OP, please edit and remove IMEI from your posts
---------- Post added at 02:17 AM ---------- Previous post was at 02:11 AM ----------
moha_moha20106 said:
this is your correct RUU.exe
Click to expand...
Click to collapse
I know you're eagerly trying to help, but you should take it easy a little more, before suggesting ruu's at every single point, and in every recent post.
going from 1.29.1540.17 to 4.19.1540.9, with S-On could really be a one way trip ... not necessarily a bad one, but just a one way trip.
moha_moha20106 said:
post your getvar all/bootloader information please
Click to expand...
Click to collapse
nkk71 said:
can you check FAQ #2 in my guide if that's the problem.
Click to expand...
Click to collapse
I can't do that because there is no driver not installed popup. When not in fastboot mode (just in the bootloader), the phone doesn't show up as anything in device manager
nkk71 said:
PS: @ OP, please edit and remove IMEI from your posts
---------- Post added at 02:17 AM ---------- Previous post was at 02:11 AM ----------
I know you're eagerly trying to help, but you should take it easy a little more, before suggesting ruu's at every single point, and in every recent post.
going from 1.29.1540.17 to 4.19.1540.9, with S-On could really be a one way trip ... not necessarily a bad one, but just a one way trip.
Click to expand...
Click to collapse
i know what you mean dear, but there's no RUU.exe between 1.29.1540.17 and 4.19.1540.9 i was found, so i suggest this one to back to stock after use your FAQ#2 method
with my respect, i learned more from you
xeron72548 said:
I can't do that because there is no driver not installed popup. When not in fastboot mode (just in the bootloader), the phone doesn't show up as anything in device manager
Click to expand...
Click to collapse
forget the pop-up!! check Windows Device Manager
your phone has 3 options:
1- bootloader (where you do fastboot commands)
2- custom recovery (TWRP or CWM), (where you can do adb commands)
3- booted ROM, if USB debugging is enabled you can use adb commands
in all three modes, the drivers "need to install", if they dont, you need to manually select them
nkk71 said:
forget the pop-up!! check Windows Device Manager
your phone has 3 options:
1- bootloader (where you do fastboot commands)
2- custom recovery (TWRP or CWM), (where you can do adb commands)
3- booted ROM, if USB debugging is enabled you can use adb commands
in all three modes, the drivers "need to install", if they dont, you need to manually select them
Click to expand...
Click to collapse
I can't get into my recovery. It freezes on the "entering recovery" screen every time. And for number 3, i can't even boot up my phone. I know this might be a bit unorthodox, but would you mind doing a teamviewer session with me?
Also, my phone DOES NOT show up in device manager unless it is in fastboot
xeron72548 said:
I can't get into my recovery. It freezes on the "entering recovery" screen every time. And for number 3, i can't even boot up my phone. I know this might be a bit unorthodox, but would you mind doing a teamviewer session with me?
Click to expand...
Click to collapse
Sorry, just turned off my pc and going to bed soon (it's almost 3am here, and I have to go to work in 4 hours)
Have you tried downloading the recovery again, make sure md5 is correct!! And don't forget to: fastboot erase cache
If that doesn't work, we can do teamviewer tomorrow.
Sorry, too late for me.
Sent from my HTC One using Tapatalk
---------- Post added at 02:49 AM ---------- Previous post was at 02:43 AM ----------
xeron72548 said:
I can't get into my recovery. It freezes on the "entering recovery" screen every time. And for number 3, i can't even boot up my phone. I know this might be a bit unorthodox, but would you mind doing a teamviewer session with me?
Also, my phone DOES NOT show up in device manager unless it is in fastboot
Click to expand...
Click to collapse
U know what, send me teamviewer Id and pass on PM... Booting up, but not more than 20 minutes, okay?
Sent from my HTC One using Tapatalk
---------- Post added at 02:58 AM ---------- Previous post was at 02:49 AM ----------
xeron72548 said:
I can't get into my recovery. It freezes on the "entering recovery" screen every time. And for number 3, i can't even boot up my phone. I know this might be a bit unorthodox, but would you mind doing a teamviewer session with me?
Also, my phone DOES NOT show up in device manager unless it is in fastboot
Click to expand...
Click to collapse
waiting...
moha_moha20106 said:
try nkk71 method, it will resolve your problem
this is your correct RUU.exe
Click to expand...
Click to collapse
Hey. I'm really thinking of using the RUU but the radio on the RUU you gave me doesn't match the one that is on my phone. Would this be a problem?
xeron72548 said:
Hey. I'm really thinking of using the RUU but the radio on the RUU you gave me doesn't match the one that is on my phone. Would this be a problem?
Click to expand...
Click to collapse
no problem for that
moha_moha20106 said:
no problem for that
Click to expand...
Click to collapse
For some reason the download speed is extremely slow. About 50kbs
Is this normal?
xeron72548 said:
For some reason the download speed is extremely slow. About 50kbs
Is this normal?
Click to expand...
Click to collapse
maybe you far from server , so the speed is slow
be patient
moha_moha20106 said:
maybe you far from server , so the speed is slow
be patient
Click to expand...
Click to collapse
I tried running the RUU and it said it was the wrong RUU. Is there another one that I should download?
xeron72548 said:
I tried running the RUU and it said it was the wrong RUU. Is there another one that I should download?
Click to expand...
Click to collapse
Also, my bootloader used to say this but now there is nothing after the version-main. It's blank
(bootloader) version-main: 1.29.1540.17
xeron72548 said:
Also, my bootloader used to say this but now there is nothing after the version-main. It's blank
(bootloader) version-main: 1.29.1540.17
Click to expand...
Click to collapse
does your phone S-off ?
what's your HBoot ver. ?
moha_moha20106 said:
does your phone S-off ?
what's your HBoot ver. ?
Click to expand...
Click to collapse
My phone is s-on and my bootloader version (version-main) is blank whenever I do getvar all
Hey Guys,
I am pulling my hair out trying to return my HTC one M7 back to stock. Selling it to a friend that knows nothing about rooting and is not tech savy.
Anyways I cant seem to get the RUU to do. I have the correct file (I am with Rogers in Canada) that is the most up to date (see pictures).
I keep getting the Error 158 Image Error when I run the setup.
My phone is Locked as well which i know is the main cause for this error.
I am also running HD Revolution 84.0 at the moment.
I also set the CID to 11111111, hoping this might fix it but no luck
Any help is most appreciated.
FowlMouthedDuck said:
Hey Guys,
I am pulling my hair out trying to return my HTC one M7 back to stock. Selling it to a friend that knows nothing about rooting and is not tech savy.
Anyways I cant seem to get the RUU to do. I have the correct file (I am with Rogers in Canada) that is the most up to date (see pictures).
I keep getting the Error 158 Image Error when I run the setup.
My phone is Locked as well which i know is the main cause for this error.
I am also running HD Revolution 84.0 at the moment.
I also set the CID to 11111111, hoping this might fix it but no luck
Any help is most appreciated.
Click to expand...
Click to collapse
I should also note I am running TWRP v2.8.4.0
FowlMouthedDuck said:
I should also note I am running TWRP v2.8.4.0
Click to expand...
Click to collapse
post your fastboot getvar all please without imei and serial number please.
Seanie280672 said:
post your fastboot getvar all please without imei and serial number please.
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.20.3263.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: 11111111
battery-status: good
battery-voltage: 4256mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
FowlMouthedDuck said:
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.20.3263.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: 11111111
battery-status: good
battery-voltage: 4256mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
Click to expand...
Click to collapse
Ok never mind, version main is missing, I suggest you find the firmware and flash that first then whilst still in the bootloader with fastboot USB on the screen, run the RUU
Seanie280672 said:
Ok never mind, version main is missing, I suggest you find the firmware and flash that first then whilst still in the bootloader with fastboot USB on the screen, run the RUU
Click to expand...
Click to collapse
Where is the best spot to download the firmware?
FowlMouthedDuck said:
Where is the best spot to download the firmware?
Click to expand...
Click to collapse
you should be able to pull it from the ruu, when you start the ruu and it extracts itself, make sure your computer is showing hidden files and folders then goto C:\users\(your user name)\app data\ local\(lots of strange characters and numbers folder) before closing the RUU and copy the firmware to a different location on your computer.
However, also as your s-off, you are aware you can flash any RUU like the 401 (WWE) or developer edition, its all stock.
Seanie280672 said:
you should be able to pull it from the ruu, when you start the ruu and it extracts itself, make sure your computer is showing hidden files and folders then goto C:\users\(your user name)\app data\ local\(lots of strange characters and numbers folder) before closing the RUU and copy the firmware to a different location on your computer.
However, also as your s-off, you are aware you can flash any RUU like the 401 (WWE) or developer edition, its all stock.
Click to expand...
Click to collapse
1. Is it in the Temp folder?
2. if It flash one of those RUU's, can I still update to Lollipop when it is available?
FowlMouthedDuck said:
Where is the best spot to download the firmware?
Click to expand...
Click to collapse
Your hboot 1.44 means the firmware has never been updated or did you put that their returning to stock ?
Maybe try an older RUU like >> http://forum.xda-developers.com/showthread.php?t=2529225
FowlMouthedDuck said:
1. Is it in the Temp folder?
2. if It flash one of those RUU's, can I still update to Lollipop when it is available?
Click to expand...
Click to collapse
Yup, dev edition will be the first to get it too.
Seanie280672 said:
Yup, dev edition will be the first to get it too.
Click to expand...
Click to collapse
Is it the Rom.zip file? When I tried to copy to the phone in windows 7 to the phone, it just gives me a "Cannot copy item" msg. The device has either stopped responding or has been disconnected.
I am thinking maybe the dev edition might be the best bet because my friend might be switching to another carrier instead of Rogers
FowlMouthedDuck said:
Is it the Rom.zip file? When I tried to copy to the phone in windows 7 to the phone, it just gives me a "Cannot copy item" msg. The device has either stopped responding or has been disconnected.
I am thinking maybe the dev edition might be the best bet because my friend might be switching to another carrier instead of Rogers
Click to expand...
Click to collapse
then try here >> http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
theirs also a RUU here 6.07.1540.2 >> http://dl3.htc.com/application/RUU_...4_10.33E.1718.01L_release_404528_signed_2.exe
Also their is no Firmware.zip in a RUU their found in OTA update packages
clsA said:
then try here >> http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
theirs also a RUU here 6.07.1540.2 >> http://dl3.htc.com/application/RUU_...4_10.33E.1718.01L_release_404528_signed_2.exe
Click to expand...
Click to collapse
Will this still allow the phone to be unlocked and switched to another carrier here in Canada? (ex. rogers to telus).
FowlMouthedDuck said:
Is it the Rom.zip file? When I tried to copy to the phone in windows 7 to the phone, it just gives me a "Cannot copy item" msg. The device has either stopped responding or has been disconnected.
I am thinking maybe the dev edition might be the best bet because my friend might be switching to another carrier instead of Rogers
Click to expand...
Click to collapse
well if you go to dev edition be sure to note clsA link incase of any problems and you have to return it to Rogers.
also need to know if you backflashed your HBOOT to 1.44 yourself ?
---------- Post added at 09:51 PM ---------- Previous post was at 09:45 PM ----------
clsA said:
then try here >> http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
theirs also a RUU here 6.07.1540.2 >> http://dl3.htc.com/application/RUU_...4_10.33E.1718.01L_release_404528_signed_2.exe
Also their is no Firmware.zip in a RUU their found in OTA update packages
Click to expand...
Click to collapse
sorry missed this, thanks :good:
Seanie280672 said:
well if you go to dev edition be sure to note clsA link incase of any problems and you have to return it to Rogers.
also need to know if you backflashed your HBOOT to 1.44 yourself ?
---------- Post added at 09:51 PM ---------- Previous post was at 09:45 PM ----------
sorry missed this, thanks :good:
Click to expand...
Click to collapse
Can to simply take the firmware from the OTA? If so, do I install the .zip like any ROM? Because I am trying to do that and as soon as I hit install in TWRP, it just reboots the recovery.
And yes I did backflash the HBOOT. I believe i had to do it when I had the lastest Viperone rom installed.
FowlMouthedDuck said:
Can to simply take the firmware from the OTA? If so, do I install the .zip like any ROM? Because I am trying to do that and as soon as I hit install in TWRP, it just reboots the recovery.
And yes I did backflash the HBOOT. I believe i had to do it when I had the lastest Viperone rom installed.
Click to expand...
Click to collapse
Disregard my last post. I forgot you had to use fastboot to update firmware. So I used the firmware.zip from the OTA. Now after rebooting, i get no display. I still have my usb plugged in and I can hear windows connecting and disconnecting but nothing is happening when I hold down power
FowlMouthedDuck said:
Disregard my last post. I forgot you had to use fastboot to update firmware. So I used the firmware.zip from the OTA. Now after rebooting, i get no display. I still have my usb plugged in and I can hear windows connecting and disconnecting but nothing is happening when I hold down power
Click to expand...
Click to collapse
Crap .. what firmware did you flash ?? and you never answered how did you get to hboot 1.44
you have to flash those OTA firmware.zip in order 3.x to 4.x to 5.x to 6.x ... you cant just jump to the newest firmware
when you plug in your phone check device manager for QHSUSB_DLOAD
Oops I forgot to finish my post. I did downflash the hboot when I downloaded the latest viperone rom (i think it asked me to if I remember correctly).
So device manager has QHUSB_DLOAD, what should i do with it?
Sorry for all the headaches. I am still a little new to the firmware stuff and going back to stock
FowlMouthedDuck said:
Oops I forgot to finish my post. I did downflash the hboot when I downloaded the latest viperone rom (i think it asked me to if I remember correctly).
So device manager has QHUSB_DLOAD, what should i do with it?
Sorry for all the headaches. I am still a little new to the firmware stuff and going back to stock
Click to expand...
Click to collapse
Yeah that sucks .. hope you can make this work
http://forum.xda-developers.com/showthread.php?t=2770684
FowlMouthedDuck said:
So I used the firmware.zip from the OTA.
Click to expand...
Click to collapse
you should be able to pull it from the ruu
Click to expand...
Click to collapse
he said, not from an ota. Ota fimware are only patches and must be flashed incrementally like clsA said.
So device manager has QHUSB_DLOAD, what should i do with it?
Click to expand...
Click to collapse
Looks like you make the situation worse. you could have avoided that by following what they said... :angel:
Now follow this guide: http://forum.xda-developers.com/showthread.php?t=2770684