Database Develop

[Q] HELP!!! Cant access recovery mode & WiFi isnt connecting at all [MIUI 1.11.25]

[Q] HELP!!! Cant access recovery mode & WiFi isnt connecting at all [MIUI 1.11.25]
After I upgraded to the new MIUI rom, I noticed that the Gmail app and the Email app where crashing all the time so I thought it would be a good idea to to wipe the Dalvik cache, do a factory reset and reinstall the ROM...
I wanted to clear everything and start new... so I wiped the sdcard, sd-ext, data/cache, dalvik... then i flashed the Miui rom and made a new sd-ext3, made it 1Gb... the phone restarted normally, i installed the a2sd on the sd-ext3, everything was fine, I started re-downloading my programs. but then I restarted the phone and all the program I had installed were gone... and the a2sd+ partition was showing 0.00B of space while myy sdcard was showing that there was 1Gb missing... worse, the gapps (gmail, market etc) were gone... thought another factory reset would solve the issue, so I went into the settings/system/about phone/factory reset... it brought the gapps back but the a2sd was still showing 0.00B of space. not only that, but I couldnt connect to my wifi anymore (it keeps saying "obtaining ip adress")... also, ever since, I cant factory reset anymore... as soon as I do, the phone restart and is stuck in a bootloop... so I have to take out the battery and put it back to switch it on properly...
I tried to reboot it in recovery so that i could both reflash the MIUI ROM and re-install the sd-ext3 with less memory this time... but I couldnt get into the recovery mode no matter what. it was amon ra v2.2.1 recovery... I downloaded Rom Manager from the internet so I could switch recoveries, and I switched to clockworkmod, but still couldn't access the recovery. I thought Rom Manager wasnt not working properly so I tried flashing new recovery image through adb and fastboot, but it wouldnt even let me do it... looked for ways to bypass the recovery mode and flash the rom but it still wouldnt work... So now im stuck with the phone unable to go into recovery mode.
The phone otherwise still works, I still get and can make phone calls, but I cant connect to the internet unless using my credit, and even that for some reasons does not allow me to connect to google servers, meaning that I cannot use the Market...
How can I get My phone to work properly again?

I know you might have done this but I gotta ask the following:
- Did you pull out the battery, put it back in, and hold POWER + Trackball + Volume Down until you got to fastboot. Then select the recovery option?
- Can you please tell me what exactly it said when you tried to flash a new recovery to your phone via adb? What commands did you use to flash it in the first place.
Please provide more details so we can help you.

Is your phone unlocked? If so, the easiest way is to just reflash a recovery image using:
Code:
fastboot flash recovery "C:\location\to\recovery.img"
Then you can boot directly into the new recovery by changing the flash command to boot.
Code:
fastboot boot recovery "C:\location\to\recovery.img"
Then I would wipe the /system partition and reinstall MIUI.

Start a fastboot mode:
+ Download the fastboot http://dl.dropbox.com/u/8180983/N1/fastboot.zip
+ Extract the contents of fastboot.zip to some directory of your
preference
+ Download the su.zip http://dl.dropbox.com/u/8180983/N1/su.zip
+ Copy to the root of SD * Do not extract the contents, simply copy
to the root of SD *
+ Turn off your phone
+ Press and hold the trackball, press the power
+ The phone will connect in fastboot mode
+ Plug the USB cable
+ You will see a highlighted message "USB fastboot"
2 Unlock your bootloader:
<WARNING - This procedure below deletes all your
SETTINGS!>
+ At the command prompt / terminal, go to the directory where you
Drew fastboot.zip
+ If rWindows:
+ Go to Start> Run> cmd
+ Use the cd command to access the directory where you extracted the
fastboot.zip
+ Type-windows.exe fastboot devices
+ In the list will show your device
+ Type fastboot-windows.exe oem unlock
+ If it is Linux:
Run the + terminal of your choice
+ Use the force, become as root (su -)
+ Go to the directory where you extracted using fastboot.zip
cd
+ Enter. / Fastboot-linux devices
+ In the list will show your device
+ Enter. / Fastboot-linux oem unlock
+ If Mac, use the same steps as replacing the Linux
for fastboot. / fastboot-mac
+ Confirm unlocking
+ Now your phone will accept any customROM
3 Install any custom recovery:
- I used ClockworkMod, but there are others, such as Amon_Ra's.
http://mirror1.kanged.net/recoveries/recovery-clockwork-2.5.1.4-passi ...
+ If linux:
+ With the phone connected to usb fastboot mode and type:. /
linux-fastboot flash recovery <caminho/ para/ o/ arquivo/> / recovery-
clockwork-2.5.1.4-passion.img
+ If windows:
+ With the phone plugged into usb mode and type fastboot: fastboot-
windows.exe flash recovery <caminho/ para/ o/ arquivo/> / recovery-
clockwork-2.5.1.4-passion.img
+ If MAC:
+ With the phone connected to usb fastboot mode and type:. /
fastboot-mac flash recovery <caminho/ para/ o/ arquivo/> / recovery-
clockwork-2.5.1.4-passion.img
+ Okay, you installed a custom recovery and now has several
features such as nandroid backup / restore and etc..
- Accessing the custom recovery
Press + power and return to the bootloader menu, you will see an option
called RECOVERY, select it using the volume buttons and press
power to start the customrecovery
+ Will load a black screen with an exclamation point, press power
and the volume +
+ You are on the menu, scroll using the trackball or the keys
volume, to select, press the trackball

demoneyes905 said:
I know you might have done this but I gotta ask the following:
- Did you pull out the battery, put it back in, and hold POWER + Trackball + Volume Down until you got to fastboot. Then select the recovery option?
- Can you please tell me what exactly it said when you tried to flash a new recovery to your phone via adb? What commands did you use to flash it in the first place.
Please provide more details so we can help you.
Click to expand...
Click to collapse
I could get to the fastboot and was selecting the recovery option, but then it was stuck in a bootloop. When I was trying to flash using the command prompt it was saying that there were errors. but Dont worry, I fixed it. Turns out the errors were due to the fact that the command couldnt find the location of the image...

[Guide] How to unlock Boot loader and flash custom ROMs.

Here's a guide to unlocking the bootloader, flash a recovery image, and install a custom ROM on your Incredible s.
If you're not experienced with this sort of thing I advise you get help or not do it at all. I'm not responsible for anything that happens to your phone, but it is highly rare that anything will go wrong
1. Go to www.htcdev.com and log in/create an account. When logged in, click on 'Unlock Bootloader'
Now simply follow the on screen instructions provided by HTC. Some of the process requires getting some files from the Android SDK and you will needs the HTC drivers which come with HTC Sync, but this will all be explained through the process.
Now as I said, you need some files from the SDK which you can get here:
http://dl.dropbox.com/u/4263022/HTC Dev Tools.zip
I recommend putting these somewhere easy like the root of your C: drive in a folder called 'Android' like I will for the tutori. If you're still sure, select yes, and the process will complete.
2) you should see a little message pop up now asking if you'd like to go ahead and unlock the boot loader. Select yes.
3. Once done, your phone's bootloader will be unlocked, this will enable you to flash a recovery image.
4. Go to
http://download2.clockworkmod.com/re...0.2.0-vivo.img
and download the recovery image for the Incredible S. Put it in the "android" folder with the other files needed for the unlock process. This file is the ClockWorkMod recovery for the incredible s.
5. Shut down your phone. Plug it in via USB to your PC which you set up during the HTC unlock process. Hold volume down, and press power and the phone will boot into the bootloader. Wait for it to scan your SD card, then ensure "Fastboot" is highlighted and press power.
6. On your PC, load up a command prompt - open the Start menu, go to Run, and type "cmd".
7. In the command prompt window, type the following, assuming the HTC unlock files are all in C:android.
Code:
cd c:android
Then type:
Code:
fastboot flash recovery <recovery_name.img>
Don't forget the .img on the end, and replace "recovery_name" with the specific name of the recovery image you want to use. For ClockWorkMod linked to in step 4, you'd type:
Code:
fastboot flash recovery cwm-4.0.1.4-vivo.img
After a few seconds, ClockWordMod will have been flashed to your phone.
8. Reboot your phone, there should be an option in the fastboot menu (volume up and down to navigate, power to select). It should boot as per normal. Put it into USB disk mode, and download a ROM that you'd like to use. CyanogenMod is what I'm going to use: http://www.cyanogenmod.com/devices/htc-incredible-s
Download the ROM and place it in the root of your SD card
9. Power off the phone. Hold volume down and press power to boot back into the bootloader. Use volume down to select "Recovery" and press power. ClockWorkMod recovery will load.
10. Using volume up/down and power to select, go down to Backup/Restore. Select it, then click backup. ClockWorkMod will backup your stock ROM in case there are any needs to switch back.
11. After that (takes about 5 minutes), go back to the main menu. Select wipe data/factory reset and confirm. Go back to the main menu, select Advanced > Wipe Dalvik cache
12. Go to the main menu, and select "Install zip from sdcard". Next choose "Select Zip from SD card" and select the ROM you'd like to install. Confirm this action, and ClockWorkMod will install your new ROM. When done, shut down your phone.
13. Ordinarily you'd be done after that, and you could boot into your new ROM. However HBOOT 1.16 does some random stuff and tends to cause problems. I think it interferes with the installation of the boot.img that ordinarily would be flashed with the ROM. Get the ROM that you downloaded earlier (CyanogenMod in this tutorial), and on your computer, unzip the file somewhere. Once done, inside you'll see a file called "boot.img". Put this in the same folder as your other Android tools that you used earlier. Power your phone on, hold volume down, but don't choose "recovery", choose "usb fastboot".
14. Open up your command prompt again (Start > Run > "cmd"), and type (using the "android" folder for this example):
Code:
cd c:android
fastboot flash boot boot.img
This will flash the boot.img to your phone.
Power off the phone, reboot it, and that should be it!
If this helps please leave a thank you.
Good luck
Sent from my HTC Incredible S using xda premium

Bad download URL for CWM...
The URL you have documented for CWM recovery image is giving an "Access denied" response.

Thanks a lot!
It's very useful for me :good:

This is a duplicate thread and copied too.... the actual guide is at http://forum.xda-developers.com/showthread.php?t=1337105

Closed
What he said

[Q] Phone wont boot

Hi,
I was installing ARHD 7.4 on my HTC one and the install did not fully complete and now my phone will not boot. If i try to go into recovery cwm shows for a quick second and then the phone goes into an endless loop until i go back into bootloader. The drivers were installed just fine on my win 8 machine and I was able to use adb and fastboot previously but now it does not seem to work. I tried searching the forum and cannot seem to find the answer to my issue.
Any help you can provide would be much appreciated as I really do not want a paperweight.
update: for some reason when I plugged my phone into laptop instead of my desktop, my phone was detected through fastboot and I was able to clear the cache and reinstall the recovery.

Then:
Try with a flash of CWM, maybe the latest version and make an erase cache (fastboot erase cache).
After this, see if the CWM will boot and you can use it.
If yes, reflash the rom, and if that will not boot, try with flashing the boot.img from fastboot.

[Fixed] very same problem
Yeah! I had the very same problem. My phone restarted after i installed the proximity fixer for my HTC One (M7) and after that i rebooted my phone into recovery, and that was it. an endless reboot. till the splash screen and reboot.
This is what I did:
Step 1 : when its about to reboot, ignore the power button, just hit the volume down button and you will be in the bootloader section.
Step 2: highlight 'Fastboot' and select it by pressing the power button.
Step 3: connect your phone using the data cable.(P.S - make sure all your ADB drivers and etc are installed. also the fastboot in your pc).
Step 4: open the location where you have installed the fastboot (usually C:\fastboot or could be something else) in your pc and open a cmd there (hold shift and right click, select open command prompt here)
Step 5: type
Code:
fastboot erase cache
Step 6: after it has erased the cache, go download a custom recovery. (CWM/TWRP)
Step 7: copy the recovery.img file into the fastboot directory and open a cmd again (shift+ right click)
Step 8: type
Code:
fastboot flash recovery recover.img
Step 9: now just give restart bootloader on your phone.
Step 10: Now you should be able to go into recovery n reflash the ROM.
Step 11: Next time be very careful, there are some cases where in which you cant fix it back.
All the best
Hit thanks if I helped you Ciao.

Yeah... To the op I had a similar issue as your edit suggested.. I think it's residual electricity on the MoBo preventing a read on the port.
Sent from my SPH-L720 using xda premium

Root Lenovo Tab 10 TB-X103F

Root Lenovo Tab 10 TB-X103F (Tested)
1. activate developer options on the Tablet
2. enable Bootloader-Unlock on the Tablet
3. download and install ADB und fastboot
4. latest usb driver on your PC
5. download TWRP TWRP-3.0.2_TB-X103F-beta.img
https://forum.xda-developers.com/showpost.php?p=70228684&postcount=65
6. download SuperSu zip file
Steps:
1.) boot to fastboot -> shutdown your device -> press on/off + "+" Volumekey → device restarts to fastboot mode
2.) connect to your pc via usb cable
3.) start command shell (cmd) in the fastboot instalation folder on your PC and check for the device connection with the command:
"fastboot devices"
4.) do the unlocking
"fastboot oem unlock-go"
5.) boot TWRP image file in the command line, showing the pathway to the .img file (if not in the same folder):
fastboot boot TWRP-3.0.2_TB-X103F-beta.img
6.) Put SuperSu zip file in the device memory and flash SuperSu zip with TWRP, then restart the device. Done!!!!

Stock recovery remains
RooterLeopold said:
Root Lenovo Tab 10 TB-X103F (Tested)
1. activate developer options on the Tablet
2. enable Bootloader-Unlock on the Tablet
3. download and install ADB und fastboot
4. latest usb driver on your PC
5. download TWRP TWRP-3.0.2_TB-X103F-beta.img
https://forum.xda-developers.com/showpost.php?p=70228684&postcount=65
6. download SuperSu zip file
Steps:
1.) boot to fastboot -> shutdown your device -> press on/off + "+" Volumekey → device restarts to fastboot mode
2.) connect to your pc via usb cable
3.) start command shell (cmd) in the fastboot instalation folder on your PC and check for the device connection with the command:
"fastboot devices"
4.) do the unlocking
"fastboot oem unlock-go"
5.) boot TWRP image file in the command line, showing the pathway to the file:
TWRP-3.0.2_TB-X103F-beta.img
6.) Put SuperSu zip file in the device memory and flash SuperSu zip with TWRP, then restart the device. Done!!!!
Click to expand...
Click to collapse
I have done all the steps but For some reason twrp is not installed and i still have the stock recovery. Please help

That's because the above only boots TWRP to root but does not install it. To install TWRP, when in booted with TWRP, you need to transfer the TWRP img to the tablet storage and then install it while in TWRP.

it is important to show the pathway to the file TWRP-3.0.2_TB-X103F-beta.img in the command line, like:
C:\Users\Public\Documents\My Videos\TWRP-3.0.2_TB-X103F-beta.img

Sorry for this newbie question.
Which part of the above rooting steps is rooting my tablet, what is TWRP doing and why do I need to install the SuperSU app?
During my first try I didn't boot the TWRP image rather I flashed it. But that didn't help at all.
After booting the TWRP image I was able to flash the SuperSU app.
The stock recovery is still in use.
Thanks in advance.

Read the steps carefully and follow the steps, it is a tested successfull strategy. To get deep knowlege about the background processes, please read the threads elsewhere in Web.

Yow how do you enter Fastboot on the tablet and i haved tied avery button on the tablet and i dont see the fastboot option

Entering Fastboot on Lenovo TB-X103F tablet
ShottaDopey said:
Yow how do you enter Fastboot on the tablet and i haved tied avery button on the tablet and i dont see the fastboot option
Click to expand...
Click to collapse
Hi everyone. I just want to clarify something about this procedure There's a lot of people being confused on how to get into FASTBOOT on some things, and that's stopping them getting anywhere from the beginning.
The Lenovo TB-X103F tablet doesn't have a way of booting directly into FASTBOOT. Turning the tablet On while holding either volume key and the On button doesn't do it directly. . . . . Firstly, there's 3 buttons on the tablet, I call them VOL- VOL+ PWR (again, that's just to clarify things 100%)
here's what must be done (well it's this way on the 3 I have on my desk, so I assume all TB-X103F tablets are the same) . . . . .
1) Turn the tablet off completely.
2) Press & hold the VOL+ button (the middle of the 3 buttons).
3) Press & hold the PWR button, release the PWR button as soon as anything appears on screen - Keep holding VOL+ button.
4) After about 8 seconds the familiar green android lay down will appear. Then, your recovery menu will appear.
5) Release the VOL+ button anytime now.
6) Press either VOL button to select BOOTLOADER on the menu (Bootloader is the same as FASTBOOT on this menu, that's where the confusion lies for many users).
7) Got Bootloader selected? now press PWR and let the tablet reboot itself.
8) it will show the LENOVO logo, and appear to be stuck - it isn't It's in Fastboot mode.
9) Plug in your USB to PC cable, and it'll install appropriate drivers on the PC (hopefully eh?).
10) Once the drivers are installed, test it by getting a Command Prompt in your ADB/FASTBOOT folder on your PC . . . .
11) type the command FASTBOOT DEVICES It should show you that your device is connected, if it shows no devices then either it didn't install the drivers, or something
else is wrong (there's about 30 things that can have gone wrong here, too many to go through in this quick guide).
12) The tablet will stay in FASTBOOT/BOOTLOADER mode until you turn it off (or the battery goes flat lol). So stay calm, there's no rush
I've mentioned about there being no rush, because if you choose ADB connecting from the recovery menu, it disconnects automatically after about 5 minutes -
This is Important to know because it can disconnect while you're pushing/pulling files from the tablet, and cause really nasty problems. Bad design eh?
But we're in Fastboot mode, so nothing to worry about like that

Deleted

Successful root
It was hard, but I had finally had done it. I had figured it out it is easier just to go to the command prompt (I ran it under admin) and "cd C:/adb" (where you installed the adb fastboot software) while having the TWRP image file being placed there. I only wished that I had done it sooner. And for those who are new to the custom recovery it can be overwealming, but with patience and going through the files in the file explorer to find your main storage would lead you to the SuperSU file and successfully root your device.

I flashed TWRP...now what? I can't find any instructions on how to reboot into TWRP. I got into some sort of Chinese menu (PWR + VOL-) but I'm pretty sure this is the device test menu.

So I did the "fastboot oem unlock-go" command and adb said ok but my tablet just went to a black screen and won't turn on now and I'm not sure why. I also heard the Windows USB disconnect sound when i did it.

Would this work with the TB-X104F running 8.1?

Since a few months my tablet is stuck with the 'password changed, wait....' message. I had hoped that I could overcome this with the steps mentioned here. But unfortunately not
I can't start it anymore, so I'm not sure if it is in developers mode or not. Also, plugging the device in my mac didn't let it download the drivers.
Too bad, because when it was working it was a great tablet, now it's just a expensive drawer filler

SynGamer said:
I flashed TWRP...now what? I can't find any instructions on how to reboot into TWRP. I got into some sort of Chinese menu (PWR + VOL-) but I'm pretty sure this is the device test menu.
Click to expand...
Click to collapse
its the vol+ not - you need to press with the power button

Steridroid said:
I have done all the steps but For some reason twrp is not installed and i still have the stock recovery. Please help
Click to expand...
Click to collapse
so what exactly do i have to type at the command prompt to run twrp?,ive put the twrp img file in the same folder as the adb stuff.

3.) start command shell (cmd) in the fastboot instalation folder on your PC and check for the device connection with the command:
"fastboot devices"
fastboot shows notting

lenovo seems to have killed these tablets from the old lady next doors experience.. no wifi, no adb, no fastboot, no qualcomm, just unknown device, which loads NOTHING, no drivers work!!!

[RECOVERY][UNOFFICIAL] TWRP for SM-p205 (Tab A 8.0 2019 Exynos model)

Flash at your own Risk !!!
Tested Working:
Flash gsi roms
How to Flash:
1. Reboot Device to Downloadmode
2. Unlock Bootloader
3. Install adb and Fastboot driver and Device Drivers ( Google will Help )
4. Download the VBMeta-disabled.tar and the twrp-3.6.0_9-0-p205.tar and the multidisable script
5. Download Odin3 from Attachments and start Odin on PC
6. In Odin Press on Options and untick Auto Reboot
7. Flash VBMeta-disabled.tar with Odin ( In Odin click on AP - select the vbmeta-disabled.tar and press start )
8. After flash vbmeta without errors press on AP and select twrp-3.6.0_9-0-p205.tar and press on start
9. If all is Flashed without errors longpress power and vol- on device
10. instantly after device goes Blackscreen press and hold power and vol+ for 5-8 seconds to boot to TWRP
11.Click Wipe in twrp ,
12.Click Advanced Wipe
13.Select the Data checkbox
14.Click Repair of Change File System
15.Click Change File System
16.Click Ext4
17.Swipt to change(Warn !!! that will wipe your data)
18.Cilck Black
19.Go back TWRP maim screen
11.Copy the multidisable script to the device
12. Run multidisabler script on TWRP via adb or TWRP TermInal
13. Reboot
The TWRP file:
Twrp_sm-p205 - Google Drive
drive.google.com

Deleted

NOTE : the twrp isn't made by me i found it at
Pledge for TWRP for Tab A with S-pen (SM-P205)?
Hi! I am relativelly new at XDA. I think i read somewhere that pledging cash for help to get a certain thing done is allowed but am a bit unsure. So excuse me if this post is perhaps slightly against the rules or so. Moderators can of course in...
forum.xda-developers.com