Database Develop

Possible brick going from ICS back to GB

tried going back to this Rocket Rom v22 from Rocket Rom ICS 1.5.
i flashed abyssnote 3.9. then immediately flashed RR v22 and now im stuck "installing modem" for thirty minutes and it is making no progress.
agrh..
did i just brick my phone? if not would pulling the battery and rebooting into something help or make matter worse?
whatever my next move is, i'd like to make sure it is the correct one.
help help help please and thank you!
jason
update: stuck for an hour. not sure what next step i should try.
restore ics? if so would i need to flash a new kernel? could i just do a factory wipe and repeat the process?
argh, please help.

question can be found here
NO FLASH!!!!!!! ICS Full Root Stock kernel LP1 I9220 and N7000

chris85e said:
question can be found here
NO FLASH!!!!!!! ICS Full Root Stock kernel LP1 I9220 and N7000
Click to expand...
Click to collapse
great, 92 pages to read through to find out what to do once you are stuck flashing modem when going from ics back to gb.
thanks...

jason370 said:
great, 92 pages to read through to find out what to do once you are stuck flashing modem when going from ics back to gb.
thanks...
Click to expand...
Click to collapse
Search the thread. It shouldn't take too long. I'd search for you but I'm on my phone. Good luck man.
Sent from my GT-N7000 using xda premium

There's about zero useful information in that thread, just to let you know. You're wasting your time.

smalmagal said:
There's about zero useful information in that thread, just to let you know. You're wasting your time.
Click to expand...
Click to collapse
Agreed, that thread was a waste of two hours and almost led me down a terrible path.
I fixed it...
Flashed abyss 3.9 again, full wipe (data, dvlik, partition) then flashed rrv22.
Boom, working.
Sent from my GT-N7000 using xda premium

The bricking only happened when using angelroms ICS kernels. A shame that happened

jason370 said:
whatever my next move is, i'd like to make sure it is the correct one.
help help help please and thank you!
jason
argh, please help.
Click to expand...
Click to collapse
flash to stock ROM firmware N7000XXKKA_N7000OXXKK5_ATO.zip via pc odin, then follow rooting
---------- Post added at 11:47 AM ---------- Previous post was at 11:39 AM ----------
jason370 said:
whatever my next move is, i'd like to make sure it is the correct one.
help help help please and thank you!
jason
argh, please help.
Click to expand...
Click to collapse
flash to stock ROM firmware N7000XXKKA_N7000OXXKK5_ATO.zip via pc odin, then follow rooting then upgrade to your favorite rom..

honf said:
The bricking only happened when using angelroms ICS kernels. A shame that happened
Click to expand...
Click to collapse
yeah... it "burnt" my SGN mainboard. Luckily SGN still new enough to replace a new mainboard for me.

jason370 said:
I fixed it...
Flashed abyss 3.9 again, full wipe (data, dvlik, partition) then flashed rrv22.
Boom, working.
Click to expand...
Click to collapse
What you actually tried to do initially was slap a GB Rom on top of the ICS one. That is not a done thing.
What you do when coming down from ICS is
1. flash Abyss
2. wipe everything, including your arse, to eliminate all ICS traces from your future GB
3. flash GB
No wonder you got stuck at boot.

[Q] i9305 video camera

Hi,
I've installed the latest beta version of rxtreme 4.3 4.0 on my i9305,
every thing is working fine except the video camera which show error,
please help, thankyou.

vicky93 said:
Hi,
I've installed the latest beta version of rxtreme 4.3 4.0 on my i9305,
every thing is working fine except the video camera which show error,
please help, thankyou.
Click to expand...
Click to collapse
why don't you post in that ROM thread and ask for a fix? help that developer to make that ROM better....
and provide more details...
that ROM is a collection of fixes,tweaks and other stuff...there are a lot of things that can go wrong.
sorry for saying this but you are ......

spiderman07 said:
why don't you post in that ROM thread and ask for a fix? help that developer to make that ROM better....
and provide more details...
that ROM is a collection of fixes,tweaks and other stuff...there are a lot of things that can go wrong.
sorry for saying this but you are ......
Click to expand...
Click to collapse
he cant dude he has to make 10 posts first NOOB he should try finding in the thread for a zip or some other fix for the camera..

I guess it is a problem with boeffla kernel. I had the same issue... flashed stock kernel, started the camera app taken a few photos and then back to boeffla kernel. That's how I fixed it. Maybe try it.
Hit thanks if I helped you :thumbup:
Sent from my GT-I9305 using XDA Free mobile app

MaHo_66 said:
he cant dude he has to make 10 posts first NOOB he should try finding in the thread for a zip or some other fix for the camera..
Click to expand...
Click to collapse
oups...now i saw...but he is big noob...

spiderman07 said:
oups...now i saw...but he is big noob...
Click to expand...
Click to collapse
Yeaah well.. arent we all noobs here? :cyclops: there is still much to learn for everybody

Well big or small, am a novice here & as you said, we learn everyday !
I didn't have much chance on getting the latest kernel to flash, think i'll wait for an update. Anyway thanks for your advices

[SOLVED] [Q] Stuck on AROMA installer

Hello folks...
well.... i'm having a weird situation here....
i want to try the cyanogemmod to see how it is... So.... i went from the factory rom to stock rom downloaded from here (( ok )), then I installed this one (( ok ))... then I flashed this one (( sort of ok ))....
then, this latest CM version came with so many issues and bugs (( freezes and gives me an error from everything all the time)) then I decided (( in less of 24 hours of use)) to flash another ROM.... so my journey begins...
I decided to flash the Miui to try it, then I got stuck on AROMA installer....
""starting aroma installer version 2.70RC2
( c ) 2013 by amarullz xda-developers""
Click to expand...
Click to collapse
Later i tried to flash other ROMs and all of them i'm getting the same error.... the latest one i tried to flash was KitSlim_AMG and no sucess at ll
but, with this one the error was
""starting aroma installer version 2.70B6
( c ) 2013 by amarullz xda-developers""
Click to expand...
Click to collapse
Now.... i just realize i CAN'T flash any other ROM.... what can I do ??? is there any other way?? what can i do??
Thanks!

well...
tried Emma and SUS, and none of them help me because the CM is installed..... any help guys??
Thanks!

Simply.
If something went wrong restore your backup (which you didn't make I think) and as last option download stock Rom and flash it with flashtool.
There is plenty of tutorial how to do it on YouTube.
Sent from my C6903 using XDA Free mobile app

If someone got stuck on this same situation.... i solved this with a simple solution..... follow these simple steps
- regardless your phone.... download a stock rom with any kind of modifications at all... try to download right from your manufacturer a clean one...
- flash it, following the steps as recommended BY YOUR manufacturer...
- after the flashing... turn on your device and use it a little bit....
- turn it off and flash the rom you want as recommended by the dev...
that's it!!! enjoy again your phone! =)
cheers =)

electrash said:
Simply.
If something went wrong restore your backup (which you didn't make I think) and as last option download stock Rom and flash it with flashtool.
There is plenty of tutorial how to do it on YouTube.
Sent from my C6903 using XDA Free mobile app
Click to expand...
Click to collapse
I came here to write this and you already posted.... i'm a newbie in flash things... so some stuffs are kind of new for me.... and as long i couldn't find any suitable answer for me I need to find by myself...
but im glad you could help me as well... i will never forget this kind of ""dummy"" thing =)
Cheers =)

soulburnerms said:
I came here to write this and you already posted.... i'm a newbie in flash things... so some stuffs are kind of new for me.... and as long i couldn't find any suitable answer for me I need to find by myself...
but im glad you could help me as well... i will never forget this kind of ""dummy"" thing =)
Cheers =)
Click to expand...
Click to collapse
Sorry, I didn't want to look rude or offensive.
I am glad that you fixed your phone.
Just remember. Backup always (recovery)
Sent from my C6903 using XDA Free mobile app

electrash said:
Sorry, I didn't want to look rude or offensive.
I am glad that you fixed your phone.
Just remember. Backup always (recovery)
Sent from my C6903 using XDA Free mobile app
Click to expand...
Click to collapse
sorry to looked like this... for real... it wasnt my intention.... i tried to say it i found the solution a littlte bit before you said... and then i came here to write it down my ""solution""... but i didnt reloaded the page.... so, i could't see your solution before mine.... just time lapse mistake... nothing else....
sorry and thanks for your help... much appreciated =)

SM-N920W8 ROOT not in the list

Hi guys, first time poster here, I was on this thread
Code:
http://forum.xda-developers.com/note5/development/dev-pre-root-firmware-twrp-testing-t3183877
and it said on it that the model SM-N920W8 was supported for the spaceX kernel.
Once I clicked on this link
Code:
http://samfirm.net/post/129813196562/spacex-kernel-note5-s6e-plus
I dont see the SM-N920W8 model in the list of Supported devices status, unless he forgot to put it I don't see it and I doubt its the SM-N9208 cuz this one is a dual I think.
So did someone actually use it for SM-N920W8 and it worked with no issues? Mine is the rogers version in Canada.
thnx

h4x3r101 said:
Hi guys, first time poster here, I was on this thread
Code:
http://forum.xda-developers.com/note5/development/dev-pre-root-firmware-twrp-testing-t3183877
and it said on it that the model SM-N920W8 was supported for the spaceX kernel.
Once I clicked on this link
Code:
http://samfirm.net/post/129813196562/spacex-kernel-note5-s6e-plus
I dont see the SM-N920W8 model in the list of Supported devices status, unless he forgot to put it I don't see it and I doubt its the SM-N9208 cuz this one is a dual I think.
So did someone actually use it for SM-N920W8 and it worked with no issues? Mine is the rogers version in Canada.
thnx
Click to expand...
Click to collapse
Hi and welcome,
If you follow the download link for "all N920", pretty sure that's the file you need:
https://www.androidfilehost.com/?w=files&flid=39339
SpaceX-Kernel-v0.1_N920W8(official).tar.md5 ; should be flashed with Odin.
Also, remember that this root method will trip the Knox flag permanently (Void warranty).
EDIT: I actually did not tested it. Someone else could confirm, although I feel quite confident.

While I can verify the above kernel works on my W8 (Rogers), I cannot seem to shake the issue of random reboots.. At least once a day the phone will reboot on its own, and almost every phone call, the phone will reboot a couple of minutes in.
I love having a rooted device but the compromise of stability is making me consider going back to factory stock... Using the 0.1, 0.2, and noble kernels have all yielded the same symptoms. Anyone have a suggestion?

Reasonable_Man said:
While I can verify the above kernel works on my W8 (Rogers), I cannot seem to shake the issue of random reboots.. At least once a day the phone will reboot on its own, and almost every phone call, the phone will reboot a couple of minutes in.
I love having a rooted device but the compromise of stability is making me consider going back to factory stock... Using the 0.1, 0.2, and noble kernels have all yielded the same symptoms. Anyone have a suggestion?
Click to expand...
Click to collapse
Well thnx for the heads-up... I thought that the spaceX was supposed to fix the random reboots..guess not. I will be waiting then for a stable Kernel.

@Manh_IT did release a fix for Canadian Samsung Galaxy Note 5 SM- N920W8 I just rooted and even installed CWM not one issue here
The random reboot fix is an image file 920T/W8 released October 09, 2015
Dl boot.img and flash it via CWM or TWRP

Hello where did you get the kernel to root the note 5 canadian version or how do you do it thank you

I've been told my SkyHigh SM-N920T kernel works with SM-N920W8. You can find it on the T-Mobile Note 5 original android development forum.

Please give us a link of those files!
Hi there, since you have no random reboot issue at all can you please give us the link of the files. And, that would be great if you could guide us the step by step procedure. Thanks in advance
guruguido said:
@Manh_IT did release a fix for Canadian Samsung Galaxy Note 5 SM- N920W8 I just rooted and even installed CWM not one issue here
The random reboot fix is an image file 920T/W8 released October 09, 2015
Dl boot.img and flash it via CWM or TWRP
Click to expand...
Click to collapse

counterzattack said:
Hi there, since you have no random reboot issue at all can you please give us the link of the files. And, that would be great if you could guide us the step by step procedure. Thanks in advance
Click to expand...
Click to collapse
Seriously? I learned reading and not asking step by step instructions. Come on man. Do some research.

Alright no instructions needed. Like others I have tried all the kernels for note 5 and found random reboot issues. You are saying you have no issue with that whatsoever. That's why can you please give me the link of those files?

counterzattack said:
Alright no instructions needed. Like others I have tried all the kernels for note 5 and found random reboot issues. You are saying you have no issue with that whatsoever. That's why can you please give me the link of those files?
Click to expand...
Click to collapse
I don't know what version you have, I got the N920W8... Here is what I did, hope that helps.
*NOTE* N920TW8 is the N920W8 version combined with N920T version. They are basically identical. Just in case you were wondering where the N920W8 is since you will only find N920TW8 in the list, go here
Code:
http://forum.xda-developers.com/note5/development/arter97-kernel-galaxy-note-5-t3189907
Read about it a bit then go here
Code:
http://arter97.com/browse/exynos7420/kernel/6.0/n920tw8/
arter97-kernel-n920tw8-6.0.zip
Click to expand...
Click to collapse
grab that file above and flash it with philZ recovery (that's what I did)
you can grab philZ from the same link of the kernel, either the MD5 if you are using odin or the zip if you will flash.
and that's it! I had no issues on my phone at all, I installed WANAM's xposed and all is good.

Thanks for your help
I'll definitely do this. I use N920W8 with telus.

Thanks so much
Hey mate, it worked. Thanks so much

counterzattack said:
Hey mate, it worked. Thanks so much
Click to expand...
Click to collapse
Im happy to hear that..enjoy
Sent from my SM-N920W8 using Tapatalk

Whether that post tells looks hard but I'll give it a try.

need any help?
michalisxc702 said:
Whether that post tells looks hard but I'll give it a try.
Click to expand...
Click to collapse
Hi there, if you need any help let me know

Ok i have 2 questions :
Can I install the kernel using Odin as well as the random reboot file zip? Thanks it's just confusing

michalisxc702 said:
Ok i have 2 questions :
Can I install the kernel using Odin as well as the random reboot file zip? Thanks it's just confusing
Click to expand...
Click to collapse
Since the Kernel is a zip file, you can't install it with Odin. You have to use twrp.
---------- Post added at 05:20 AM ---------- Previous post was at 05:19 AM ----------
counterzattack said:
Since the Kernel is a zip file, you can't install it with Odin. You have to use twrp.
Click to expand...
Click to collapse
Another thing is please have some backup, don't break your phone

TWRP?
What is that and how do I get it?

michalisxc702 said:
TWRP?
What is that and how do I get it?
Click to expand...
Click to collapse
it's a custom recovery. you don't have it? here download all these 3 files, you need it. https://onedrive.live.com/redir?res...15&authkey=!AH-QhLvUTZxvBJc&ithint=folder,zip

BRA9 to Oreo?

Any time I try to do anything in Odin it doesn't get passed "setupconnection" i am running a Tmobile Note 8 with BRA9 firmware. I need to get it to something that will take Verizon's network...I'm trying to flash it to Oreo but i cant get out of BRA9.
Has anybody had ANY luck with this?

Are you using the latest Odin 3.13.1? You need that to flash Oreo.

stonedpsycho said:
Are you using the latest Odin 3.13.1? You need that to flash Oreo.
Click to expand...
Click to collapse
I was using 3.12 to flash BRA9 since that is still 7.1.1 then i tried 3.13 and i keep getting stuck at "setup connection"
Sent from my SM-N950U using Tapatalk

You have 3 threads open for the same-ish issue...not sure how to resolve, but one thread is generally suggested .

Thanks for the help
sefrcoko said:
You have 3 threads open for the same-ish issue...not sure how to resolve, but one thread is generally suggested .
Click to expand...
Click to collapse
Figured I reword my issue in a few ways in a few different threads to try and expedite getting a solution to my problem.

dmessy said:
Figured I reword my issue in a few ways in a few different threads to try and expedite getting a solution to my problem.
Click to expand...
Click to collapse
Understandable and logical, but honestly still not recommended! Just informing, that's all . Imagine if every thread here was posted in triplicate...it would be harder than it already is to find anything at all! Still, hope someone is able to help you get it sorted out asap.[emoji106]