Database Develop

Moto X - re-locking bootloader

Guys,
do you have any RELIABLE script for going back to STOCK ROM - with re-locking bootloader as well?
I created this, but it does NOT work on my Moto X (XT1052 - GB RETAIL)
(It worked only on my Moto G, but not Moto X.)
It showed some error like "No valid PIV block in SP for system" when I wanted to restore the GB RETAIL ROM from this source:
http://sbf.droid-developers.org/phone.php?device=14
Thanks.
===
::Set our default parameters
@ECHO off
SET fastboot=fastboot.exe
%fastboot% devices
%fastboot% oem lock begin
%fastboot% flash partition gpt.bin
%fastboot% flash motoboot motoboot.img
%fastboot% flash logo Moto-logo.bin
%fastboot% flash boot boot.img
%fastboot% flash recovery recovery.img
%fastboot% flash system system.img
%fastboot% flash modem NON-HLOS.bin
%fastboot% erase modemst1
%fastboot% erase modemst2
%fastboot% flash fsg fsg.mbn
%fastboot% erase cache
%fastboot% erase userdata
%fastboot% oem lock
pause

post the XML for the ROM you want to use.
also, what ROM & Android version is on your phone now?

xml
Thanks for reply.
1. XML from STOCK ROM is in the attachment.
Source: http://sbf.droid-developers.org/phone.php?device=0
2. I am using this almost stock ROM: http://forum.xda-developers.com/moto-x/development/fxz-xt1060-google-play-edition-unlocked-t2715488

JaroslavHruska said:
Thanks for reply.
1. XML from STOCK ROM is in the attachment.
Source: http://sbf.droid-developers.org/phone.php?device=0
2. I am using this almost stock ROM: http://forum.xda-developers.com/moto-x/development/fxz-xt1060-google-play-edition-unlocked-t2715488
Click to expand...
Click to collapse
Wait. I'm a little confused.
I read #2 saying your using the rom from that thread... so are you saying that you were running that GPE rom from that thread, but are trying to get back to stock by flashing the rom/SBF that goes with the RETAIL-GB_GHOST_KLA20.16-2.16_cid7_CFC_1FF_v2.xml you posted?
If so, after unzipping the "RETAIL-GB_GHOST..." SBF, you'd want to try the following commands from the folder where you unzipped the SFB after booting the phone to fastboot/bootloader mode....
Option 1 (based on Moto's web site and the XML you posted)
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot reboot-bootloader
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem lock
mfastboot reboot <- only if phone doesn't reboot after reporting the relock was successful
Option 2: (based on some threads here on XDA, and the XML you posted)
mfastboot oem lock begin
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem lock
mfastboot reboot <- only if phone doesn't reboot after reporting the relock was successful
Try option 1 first. If it doesn't work, try option 2.
NOTE: by Mfastboot, I mean the Moto modified version of fastboot, not the one that comes with the standard Android SDK/Platform Tools. The moto modified Fastboot.exe can sometimes be found in a windows folder inside an SBF, or you can download from -> http://mark.cdmaforums.com/X-STUFF/Mfastboot-4.4.zip

Thanks A LOT from a desperate noob. This helped me a lot

help
Czechnolog said:
Thanks for reply.
1. XML from STOCK ROM is in the attachment.
Source: http://sbf.droid-developers.org/phone.php?device=0
2. I am using this almost stock ROM: http://forum.xda-developers.com/moto-x/development/fxz-xt1060-google-play-edition-unlocked-t2715488
Click to expand...
Click to collapse
Any luck on moto x?

[Q][RESOLVED] Simple way to return to stock 1092 ?

Hello,
I would know what is the simplest way to back to stock on my XT-1092 EU version (french) ?
I have rooted my phone with multitool so the build.prop is modified and I also backed to 1095's stock rooted one time.
I downloaded RETEUALL_XT1092_4.4.4_KXE21.187-42_cid7_CFC.xml.zip, should I use mfastboot and should I return to 1095's stock unrooted with multitool before this ?
Thanks for your help.

Finally I followed these instructions and it's clean and works perfectly :
http://forum.xda-developers.com/moto-x-2014/help/xt1092-nandroid-fimware-t2932763/post56595801
Flesh one command at a time using mfastboot.
mfastboot download from here and copy it into the firmware after you've unzipped:
https://www.dropbox.com/s/lkuy6f4mat...ot-v2.rar?dl=0
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot reboot
Click to expand...
Click to collapse
Just waiting for the Lollipop official release for Europe !

XT1092 Flashing "No command" at boot after attempt to restore to stock

I have decided to sell my Moto X and so I decided that I would restore it to stock firmware before I let anyone else take it over.
Everything on it (Pictures etc) is already transferred to my computer and deleted from the phone, so no worries about that.
To start with I had the bootloader unlocked, was rooted and running Nexus Experience.
I downloaded a factory image (VICTARA_RETEU_XT1092_5.1_LPE23.32-25.1_cid7_CFC.xml) I found here on XDA,
and flashed it manually as follows:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot reboot
Then I get the warning that the bootloader has been unlocked. At first it got stuck there, but after forcing it to
shut down and trying again it gets past it and instead it starts flashing the android figure laying on it's back with a lid open
and a red hazard sign above it, telling me "No command". This appears for about 0.1 seconds every fourth second.
So here I am now, the phone is still flashing this message and it seems I can't really turn it off. I can (Sometimes, with a little
luck) reach fastboot mode, but whatever I choose from there takes me to the bootloader warning and the "No command" message.
Is there anyone that can guide me through this so I can get it up and running again and hopefully back to stock firmware?

I'm guessing you missed
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
Did the same thing the other day.
Re flash with all sparsechunk files. I'm on 1095 so there was 7 for me. Not sure about 1092.
I still had the error after. I rebooted into bootloader then selected factory and it worked.
Good luck
---------- Post added at 12:22 AM ---------- Previous post was at 12:19 AM ----------
I also didn't use these comands
mfastboot flash partition gpt.bin
mfastboot erase customize
mfastboot erase clogo
and after
mfastboot flash motoboot motoboot.img
I used
mfastboot reboot bootloader
I'm not sure if those commands are needed. Just wasn't in the tutorial I followed

moreadon said:
I'm guessing you missed
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
Did the same thing the other day.
Re flash with all sparsechunk files. I'm on 1095 so there was 7 for me. Not sure about 1092.
I still had the error after. I rebooted into bootloader then selected factory and it worked.
Good luck
---------- Post added at 12:22 AM ---------- Previous post was at 12:19 AM ----------
I also didn't use these comands
mfastboot flash partition gpt.bin
mfastboot erase customize
mfastboot erase clogo
and after
mfastboot flash motoboot motoboot.img
I used
mfastboot reboot bootloader
I'm not sure if those commands are needed. Just wasn't in the tutorial I followed
Click to expand...
Click to collapse
I did miss those, but only when I wrote this thread. Fixed that now.
I'm gonna give your method a try in just a minute!

So I did like @moreadon said:
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
I tried adding "mfastboot reboot bootloader" after "mfastboot flash motoboot motoboot.img" as well, but that failed.
Anyway, the result was exactly the same as before, except for that - just as @moreadon said - when I booted into fastboot mode and chose "Factory" it instantly gave me the Motorola boot logo and it was up and running faster than ever before. It's a success!
Quick fix, but I'm not used to using fastboot, so I'm very thankful for the help!

Qwerty1208 said:
So I did like @moreadon said:
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
I tried adding "mfastboot reboot bootloader" after "mfastboot flash motoboot motoboot.img" as well, but that failed.
Anyway, the result was exactly the same as before, except for that - just as @moreadon said - when I booted into fastboot mode and chose "Factory" it instantly gave me the Motorola boot logo and it was up and running faster than ever before. It's a success!
Quick fix, but I'm not used to using fastboot, so I'm very thankful for the help!
Click to expand...
Click to collapse
Glad it worked!

Moto G 2014 LTE XT1078 How do I restore stock rom?

Did someone had success restoring stock rom in this device?
I wanted to restore the stock rom, but I have seen people reporting hard bricks after any procedure.
A user posted this Firmware, which is supposedly for my phone.
XT1078_THEA_RETBR_DS_5.0.2_LXB22.99-24.12_cid12_subsidy-DEFAULT_CFC.xml.zip
I was thinking in follow the instructions that the user mendelssohn give here . Maybe I could use that script in this firmware, but do not know if it would work.
Someone managed to do this procedure successfully? If so, what is right procedure?
Thanks in advance.

I've been looking for how to restore the stock recovery, so I could install Android 6.0 from OTA update. I did not flash a custom ROM, because CyanogenMod did not have a stable release for XT1078 then, and it stil does not have at the time I write this. So this file helped me to revert my XT1078 to stock.
But I did not use any script. It's just how I choose to do it, I'd rather know what's going on in every step instead of let a script do things for me. I extracted the file XT1078_THEA_RETBR_DS_5.0.2_LXB22.99-24.12_cid12_subsidy-DEFAULT_CFC.xml.zip, and moved the required files to the folder platform-tools on Android SDK. Then these are the commands I used:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
After reboot, OTA update with Android 6.0 worked flawlessly.

I think you may want MM6.0 clean flash whitout any ota mess -> http://www.filefactory.com/file/2rw...MPB24.65-34_cid12_subsidy-DEFAULT_CFC.xml.zip
This is the MM 6.0 complete image, flash it as tatianes told you, but i would like to sugget the use of mfastbotv2 instead of fastboot
Flash like this
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Click to expand...
Click to collapse
Just remeber to doublecheck the numbers of systeam sparse file, if your rom have 0 to 7, ou will have to add those

Am i understand?
So, let me see if i understand:
I extract the zip with the rom in the same folder of fastboot (or mfastboot) then, after (double) check the numbers of system sparse file, i'll do this commands?
There is no "collateral effects"?
(I'm asking 'cause I've tried this, boot on a lollipop, and when i tried to reboot, the phone bricked)
Does anybody tried to do this from Cyano?

Choosing correct firmware

what is correct firmware for moto g5s plus indian varient

Sri Datta said:
what is correct firmware for moto g5s plus indian varient
Click to expand...
Click to collapse
26.116.61 https://firmware.center/firmware/Mo...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip

What is the current firmware for Moto G5s Plus XT1806? Also when applying patch via fastboot will wipe all my apps and data?

Adi5 said:
26.116.61 https://firmware.center/firmware/Mo...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
May I also ask what is the correct fimware for XT1805 retapac software channel?

gebcruz06 said:
May I also ask what is the correct fimware for XT1805 retapac software channel?
Click to expand...
Click to collapse
26.116-61 should be ok

Since no one knows about current XT1806 US firmware, can the annoying pop up be disabled?

A-bolt said:
Since no one knows about current XT1806 US firmware, can the annoying pop up be disabled?
Click to expand...
Click to collapse
flash 26.116-61 and write this commands for lock bootloader
for me works
and warring will be disabled
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem fb_mode_clear
mfastboot oem lock
mfastboot oem lock
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash boot boot.img
mfastboot oem lock