USB Connect the white light does not turn on my phone just came out on fire my friend motorola logo on pre-warmed processor does not charge the battery now, not just what reaction.
rapboy23 said:
USB Connect the white light does not turn on my phone just came out on fire my friend motorola logo on pre-warmed processor does not charge the battery now, not just what reaction.
Click to expand...
Click to collapse
May need a fastboot cable
Motorola Fastboot/Factory Programming Cables Links
Sent from my XT907 using Tapatalk
There was my friend , my phone processor into liquid contact was made was Controllers water heating response is vermıy think I need to connect the USB cable to the white light is what you have done to help me
rapboy23 said:
There was my friend , my phone processor into liquid contact was made was Controllers water heating response is vermıy think I need to connect the USB cable to the white light is what you have done to help me
Click to expand...
Click to collapse
Oh my... I understand nothing. What language is that? Is sounds a bit like "Googlish Translatorish".
Umm what?? lol
Phone came out of a fire??
Wow.....
I wear the phone just does not recognize my usb pc does not boot into the wood burning white light
rapboy23 said:
I wear the phone just does not recognize my usb pc does not boot into the wood burning white light
Click to expand...
Click to collapse
Sounds spiritual, doesn't it?
In my Droid3 the white diode by the micro-usb port doesn't light on charge (as it used to in Milestone2).
what must ı do? please hep me
rapboy23 said:
what must ı do? please hep me
Click to expand...
Click to collapse
Get a Fastboot cable, and reflash firmware with RSD Lite
see Low Battery Options
unknown device problem
rapboy23 said:
unknown device problem
Click to expand...
Click to collapse
Install motorola Official Drivers
http://forum.xda-developers.com/general/rooting-roms/motorola-usb-drivers-rsd-lite-firmware-t3042687
ı ınstalled drivers but unknown device showing device manager windows 7 stopped 43 code
rapboy23 said:
ı ınstalled drivers but unknown device showing device manager windows 7 stopped 43 code
Click to expand...
Click to collapse
Device is not fixable then.
My device tried m+power Button push nothing maybe power flex broken .
I did find the problem of the cable into the computer show as an unknown device. by plugging the cable into the computer although I
ı need power flex or fastboot cable .
ı did make it fastboot cable unknown device
changed power flex .boot mode nope
Related
I changed now the micro USB but still the phone won't turn on!
I put it to charge but the red light keeps turning on and off.
on and off
on and off
What does this mean?
Is the battery dead?
Is the usb connector damaged?
Is the board damaged?
aaa124 said:
I have a malfunctioning usb port and I want to change it. In Lebanon we don't have paypal (Don't know why )
And I dont think we have an HTC center that sells the required part.
So tomorrow I will go treasure hunting for broken htc phones in phone shops to find the usb port.
What other devices have the same port?
Click to expand...
Click to collapse
Try desire s, coz it's very similar to our device but I'm not sure.
Best wishes,
Sandy Semenov
Nothing but Blinking, Can't turn on
Edit :Is it bricked some chip stopped working properly?
aaa124 said:
Nothing but Blinking, Can't turn on
Edit :Is it bricked some chip stopped working properly?
Click to expand...
Click to collapse
Did you fix it? My led flashes when I try to charge from completely flat battery. I just leave it on charge for a while and eventually the led stays lit and I can switch the phone on.
Other than that, are you sure the port is connected correctly?
My sgh-i757m cannot turn on, I cannot access recovery or download mode, and my computer will not register the phone when I plug it in using the USB. I have tried to install and re-install the USB drivers for the samsung mobile phones and even that didn't work. Any suggestions?
Sky3 said:
My sgh-i757m cannot turn on, I cannot access recovery or download mode, and my computer will not register the phone when I plug it in using the USB. I have tried to install and re-install the USB drivers for the samsung mobile phones and even that didn't work. Any suggestions?
Click to expand...
Click to collapse
Maybe:
1)Your USB-cable is corrupted. So phone cant turn on because battery is empty. Charging with this cable is not possible, computer also doesnt detect phone.
2) measure voltage of the battery if possible or try in another phone
3) what computer did you use? Linux/windows?
Does lsusb command (linux) shows your phone? Please connect phone at the motherboard-usb-ports of the PC (most times the USB-ports on the bach of the PC)
4)does your phone show anything when trying to switch on / trying to charge?
eg. Screen backlight or touchkey backlight.
5)Try different usb-ports.
6)You can buy a so called jig for a few bucks. Maybe you can boot to download mode with that.
Do NOT press the thanks button
Regards,
LM
Lei M said:
Maybe:
1)Your USB-cable is corrupted. So phone cant turn on because battery is empty. Charging with this cable is not possible, computer also doesnt detect phone.
2) measure voltage of the battery if possible or try in another phone
3) what computer did you use? Linux/windows?
Does lsusb command (linux) shows your phone? Please connect phone at the motherboard-usb-ports of the PC (most times the USB-ports on the bach of the PC)
4)does your phone show anything when trying to switch on / trying to charge?
eg. Screen backlight or touchkey backlight.
5)Try different usb-ports.
6)You can buy a so called jig for a few bucks. Maybe you can boot to download mode with that.
Do NOT press the thanks button
Regards,
LM
Click to expand...
Click to collapse
I use Windows 7 on a Lenovo V570. The USB cable has been working fine with my SGS2 but now even when I plug it in to my laptop or the wall nothing shows up to tell me that it's charging. I've also tried different USB ports and different USB cables. I think it might be the device itself. I had ~70% battery life when this happened.
Also, I hit the thanks button because I'm still half asleep.
Sky3 said:
My sgh-i757m cannot turn on, I cannot access recovery or download mode, and my computer will not register the phone when I plug it in using the USB. I have tried to install and re-install the USB drivers for the samsung mobile phones and even that didn't work. Any suggestions?
Click to expand...
Click to collapse
I'ts a Hard-Brick. It means that your phone is actually like a brick
The only thing that you can try is to buy a USB-Jig (google it for more info) or going to the shop to repair it.
TenKoX said:
I'ts a Hard-Brick. It means that your phone is actually like a brick
The only thing that you can try is to buy a USB-Jig (google it for more info) or going to the shop to repair it.
Click to expand...
Click to collapse
Either contruct your own jig (It's just a resistor between two pins)
http://forum.xda-developers.com/showthread.php?t=1604707
...or check if you can borrow one. Check these threads out:
http://forum.xda-developers.com/showthread.php?p=31660971#post31660971
http://forum.xda-developers.com/showthread.php?t=1869496
SysGhost said:
Either contruct your own jig (It's just a resistor between two pins)
http://forum.xda-developers.com/showthread.php?t=1604707
...or check if you can borrow one. Check these threads out:
http://forum.xda-developers.com/showthread.php?p=31660971#post31660971
http://forum.xda-developers.com/showthread.php?t=1869496
Click to expand...
Click to collapse
That's right
Good luck!!
Well this problem drives me crazy.
My phone (i9070) doesn't make any sound when I plug it on my computer or charger and no charging indication appears either on the phone.
On computer side device appears under the storage devices.
However is seems that the power connection is working since if I restart the phone while the power plug is still connected the charging indicator appears. In addition after the restart the battery seems to reach 100% extremely soon (which is not normal at all). Unplugging the charger (or the computer) doesnt detected either by phone, the charging indicator is still active until restart.
I tried to factory reset the device and still "no juice".
I have tried 3 different cables with two computers where the device was connected few days ago without any problem.
I don't know what should I suspect.
Faulty battery? Faulty data connection on phone plug? OS based issue?
Any ideas?
limbo666 said:
Well this problem drives me crazy.
My phone (i9070) doesn't make any sound when I plug it on my computer or charger and no charging indication appears either on the phone.
On computer side device appears under the storage devices.
However is seems that the power connection is working since if I restart the phone while the power plug is still connected the charging indicator appears. In addition after the restart the battery seems to reach 100% extremely soon (which is not normal at all). Unplugging the charger (or the computer) doesnt detected either by phone, the charging indicator is still active until restart.
I tried to factory reset the device and still "no juice".
I have tried 3 different cables with two computers where the device was connected few days ago without any problem.
I don't know what should I suspect.
Faulty battery? Faulty data connection on phone plug? OS based issue?
Any ideas?
Click to expand...
Click to collapse
What ROM and what kernel you are using?
Sent from my GT-I9070 using Tapatalk
Sorry forgot to mention these info:
Kernel
3.0.31-CoCore-EP-8.2
Updated to 8.2 after the problems I had CoCore 8.0 until the problem appeared.
ROM
LightJB v1.2
I used to work with JellyMod v4.0 until the problem appeared and I switched to LIghtJB v1.2 to test if the problem fixed but the same behavior here.
Should I replace my battery?
Is there any way to check if the USB connection gets detected by the phone hardware (a diagnostic procedure)?
limbo666 said:
Sorry forgot to mention these info:
Kernel
3.0.31-CoCore-EP-8.2
Updated to 8.2 after the problems I had CoCore 8.0 until the problem appeared.
ROM
LightJB v1.2
I used to work with JellyMod v4.0 until the problem appeared and I switched to LIghtJB v1.2 to test if the problem fixed but the same behavior here.
Should I replace my battery?
Is there any way to check if the USB connection gets detected by the phone hardware (a diagnostic procedure)?
Click to expand...
Click to collapse
Put the phone in download mode, connect to PC via USB cable and open Odin. If the phone connects, I recommend a reflash with one firmware.
mathei said:
Put the phone in download mode, connect to PC via USB cable and open Odin. If the phone connects, I recommend a reflash with one firmware.
Click to expand...
Click to collapse
Device cannot be detected either download mode.
:crying:
Am I doomed?
limbo666 said:
Device cannot be detected either download mode.
:crying:
Am I doomed?
Click to expand...
Click to collapse
Install Samsung USB drivers.
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
shut_down said:
Install Samsung USB drivers.
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
Click to expand...
Click to collapse
Drives are already installed.
The phone is not responding on the cable when it is connected to its usb port.
Computer doesn't detect any device either.
Any ideas?
limbo666 said:
Drives are already installed.
The phone is not responding on the cable when it is connected to its usb port.
Computer doesn't detect any device either.
Any ideas?
Click to expand...
Click to collapse
Is it charging? Bad cable? Change USB port on PC, put it in some other.
You said you have charging problems? It is not shown (in phone, procentage is not going up) or it is not charging at all?
Luckily for u it's a broken flex (cheap) it costs $10 including tools to fix it yourself on ebay
Sent from my GT-S5367 using xda app-developers app
Hi All,
I also have the same problem.....
Can anyone help me.....
Yesterday while charging telephone the hard brick, only the red light is on and the phone does not respond. The phone is not detected by the computer. I need help, maybe someone had such a problem.
grzesman said:
Yesterday while charging telephone the hard brick, only the red light is on and the phone does not respond. The phone is not detected by the computer. I need help, maybe someone had such a problem.
Click to expand...
Click to collapse
I have the same problem and I find a solution?
Same problem here
Did you tried push power button more than 15 secs?
X620 fixed red led charging no usb connection
Hello, same problem, the smartphone is not recognized when connected to Pc, only red led get on. No sign of life... Tried to disconnect battery, no results... I will try to change the battery and then the flex cable.. Any suggestions in the meanwhile?
Thanks.
paulmana said:
Hello, same problem, the smartphone is not recognized when connected to Pc, only red led get on. No sign of life... Tried to disconnect battery, no results... I will try to change the battery and then the flex cable.. Any suggestions in the meanwhile?
Thanks.
Click to expand...
Click to collapse
Might be in Qualcomm Flash Image Loader (QFIL) A.K.A Emergency Download Mode (EDL Mode).
Try this guide-unbrick-unlock-leeco-le-2-x52x
More info on EDL mode fix for Leeco x720 unbrick-leeco-phones-leeco-variants
I haven't done the process on an Le eco phone before, so I can only point you towards other guides.
ironcladlad said:
Might be in Qualcomm Flash Image Loader (QFIL) A.K.A Emergency Download Mode (EDL Mode).
Try this guide-unbrick-unlock-leeco-le-2-x52x
More info on EDL mode fix for Leeco x720 unbrick-leeco-phones-leeco-variants
I haven't done the process on an Le eco phone before, so I can only point you towards other guides.
Click to expand...
Click to collapse
Many thanks, that's interesting, but I would like to preserve my data, and that procedure will wipe all data on the smartphone. I dint't try to enter in download mode, though I can't see any device in the windows device manager.
Today I replaced internal battery with a brand new one with no results. Trying to charge, both the charger and the phone remains cold, so it seems no charging process starts. Now I will leave the phone connected to the charger over 24 hours, as some users suggest. The phone was very warm when bricked, and it was connected to the wall charger - maybe some kind of thermal protection occurred. If it won't resurrect tomorrow, after some more software tries, I will order the flex cable with usb connector. Little chance, but one more try.
I will let you know.
Thanks
Thanks.
paulmana said:
Many thanks, that's interesting, but I would like to preserve my data, and that procedure will wipe all data on the smartphone. I dint't try to enter in download mode, though I can't see any device in the windows device manager.
Today I replaced internal battery with a brand new one with no results. Trying to charge, both the charger and the phone remains cold, so it seems no charging process starts. Now I will leave the phone connected to the charger over 24 hours, as some users suggest. The phone was very warm when bricked, and it was connected to the wall charger - maybe some kind of thermal protection occurred. If it won't resurrect tomorrow, after some more software tries, I will order the flex cable with usb connector. Little chance, but one more try.
I will let you know.
Thanks
Thanks.
Click to expand...
Click to collapse
Hello,
I fixed the problem: it was an hardware issue. I replaced the charging circuit (that includes the type-c connector) and the smartphone immediately woke up. All my data were preserved.
Paolo.
When plugged in charger, a short green blink flashes and that's it. Doesn't turn on, doesn't react anyhow. Tried the trick with holding Volume - key and Power Up for 120 seconds and it just blinks again and nothing more. Left for 12 hours, doesn't charge at all. Tried different cables and chargers, and laptops and computers. Nothing makes it turn on.
If connected to the compuer, it is detected as USB device ( after drivers install ) also it is detected as а QHSUSB_BULK but drivers not found. RSD Lite doesn't detect the phone as anything.
Is there any other trick to turn this thing on?
Mango Polo said:
When plugged in charger, a short green blink flashes and that's it. Doesn't turn on, doesn't react anyhow. Tried the trick with holding Volume - key and Power Up for 120 seconds and it just blinks again and nothing more. Left for 12 hours, doesn't charge at all. Tried different cables and chargers, and laptops and computers. Nothing makes it turn on.
If connected to the compuer, it is detected as USB device ( after drivers install ) also it is detected as а QHSUSB_BULK but drivers not found. RSD Lite doesn't detect the phone as anything.
Is there any other trick to turn this thing on
Click to expand...
Click to collapse
I also have this problem at times, I solved using a quick charge 2.0 charger
try to
Push the power button
And then send the phone in bootloader mode
This is a temporary fix, you have to change the battery
sorry for my bad English
linckandrea said:
I also have this problem at times, I solved using a quick charge 2.0 charger
try to
Push the power button
And then send the phone in bootloader mode
This is a temporary fix, you have to change the battery
sorry for my bad English
Click to expand...
Click to collapse
wow
this means I first have to plug the cable ( a 2.0 one ) than push power button and then add pushing the Volume - key?
Yes
linckandrea said:
Yes
Click to expand...
Click to collapse
doesn't help
can u pls tell me in a few words closer to details and steps
?
Mango Polo said:
doesn't help
can u pls tell me in a few words closer to details and steps
?
Click to expand...
Click to collapse
Insert the cable into your phone,
Press the power button (until the battery charge screen appears)
Then go to bootloader mode
If the charging battery screen does not appear, wait 5 minutes
The green LED indicates that the battery is almost completely discharged
linckandrea said:
Insert the cable into your phone,
Press the power button (until the battery charge screen appears)
Then go to bootloader mode
If the charging battery screen does not appear, wait 5 minutes
The green LED indicates that the battery is almost completely discharged
Click to expand...
Click to collapse
I guess, a 5V/2A charger is not a fast charge option, right? Cause it's not turning on my phone. And the LED blinks only for 1 second when plugged in..
I will try finding another charger
linckandrea said:
Yes
Click to expand...
Click to collapse
I will try to directly charge the battery with a cable and + with -
Mango Polo said:
I will try to directly charge the battery with a cable and + with -
Click to expand...
Click to collapse
Good idea, I suggest you warm up the back cover a bit
So it will be easier to take it off
good luck
linckandrea said:
Good idea, I suggest you warm up the back cover a bit
So it will be easier to take it off
good luck
Click to expand...
Click to collapse
Am I doing things right? Here is a picture of my battery connector. I should connect the RED wire into the hole of PLUS and the white to the one of MINUS?
Mango Polo said:
Am I doing things right? Here is a picture of my battery connector. I should connect the RED wire into the hole of PLUS and the white to the one of MINUS?
Click to expand...
Click to collapse
Forgive me but I do not know