Related
I have a Mint Condition HTC One phone I am trying to sell - Mostly just because I also own a Nexus 4 and love it - and decided I'd rather keep it and use the money on the HTC One on something else.
I'm having a hard time selling it because the "everything is unlocked" is making people scared to buy it.
It's S-OFF, SuperCID, TWRP 2.6.0.1, Bootloader Unlocked, Running 2.24 Firmware and Android Revolution 12.1, Sim Unlocked too.
It's originally a Rogers Canada HTC One
Is there any way (or guide) to completely make it stock again to help sell it? Any help would be appreciated.
Yep, just flash the Rogers RUU (if available) and then you're good to go! If there isn't one then use one of the Nandroids provided and then get the stock recovery and relock the bootloader
don't forget to go back to S-ON after flashing the RUU
herwegan said:
don't forget to go back to S-ON after flashing the RUU
Click to expand...
Click to collapse
Hmm... never flashed a RUU before. Will need to do some reading.
Anyone know where to find a Rogers RUU?
I don't care if its Rogers specifically - it can be Telus or Bell too as long as it works.
I just want to go back to Stock so it's capable of updating OTA somehow if possible.
bigystyle84 said:
Hmm... never flashed a RUU before. Will need to do some reading.
Anyone know where to find a Rogers RUU?
I don't care if its Rogers specifically - it can be Telus or Bell too as long as it works.
I just want to go back to Stock so it's capable of updating OTA somehow if possible.
Click to expand...
Click to collapse
just download the RUU (sorry, don't know if there is one for your carrier), be sure to be s-off, and then run the RUU.exe or flash the RUU.zip.
the RUU will flash stock recovery, stock rom and i think it will even relock your bootloader. and then you'll be able to download OTA-updates again.
last step is to put it back to s-on and you should be done..
Ruu for bell. Rogers, telus is not available yet, your best bet is to flash the stock wwe Ruu. Remember to flash the stock hboot if you are using a modified hboot for the red lines or you would brick your device
Sent from my HTC One using XDA Premium HD app
EnIXmA said:
Ruu for bell. Rogers, telus is not available yet, your best bet is to flash the stock wwe Ruu. Remember to flash the stock hboot if you are using a modified hboot for the red lines or you would brick your device
Sent from my HTC One using XDA Premium HD app
Click to expand...
Click to collapse
Thanks
I'm S-OFF using the Revone Method
I'm on firmware 2.24 and HBoot 1.54 (Still S-Off though)
If anyone has time, can somebody give me a real quick overview on what I need to do? I'll buy ya a beer!
I'm not real familiar with HTC Devices - This was my first experience and to be honest, Right now I'm wishing I didn't do this if I knew before hand I was going to flip it so fast.
Ok no problem
First download the RUU from here: http://forum.xda-developers.com/showthread.php?p=39588860
and run the .exe.
then you'll have stock hboot and stock recovery + stock rom.
After this you can use hasoon2000's toolkit to get back to s-on: http://forum.xda-developers.com/showthread.php?t=2183942
Be sure you never installed a custom hboot before and you are using a official hboot. Better check twice if the red warning text is there before you go s-on
And that's it
No beer needed, "thanks-button" is enough
Cheers
herwegan said:
Ok no problem
First download the RUU from here: http://forum.xda-developers.com/showthread.php?p=39588860
and run the .exe.
then you'll have stock hboot and stock recovery + stock rom.
After this you can use hasoon2000's toolkit to get back to s-on: http://forum.xda-developers.com/showthread.php?t=2183942
Be sure you never installed a custom hboot before and you are using a official hboot. Better check twice if the red warning text is there before you go s-on
And that's it
No beer needed, "thanks-button" is enough
Cheers
Click to expand...
Click to collapse
You cant run the RUU with Super CID. You will have to change it to one that matches the RUU you choose before running it, but keep s-off. Then you should be able to use the tool as mentioned above or do all the things manually. You can use my guide if you like:
http://forum.xda-developers.com/showthread.php?p=43458497
Thanks for the help.
Which specific RUU should I flash? I don't see a Generic WWE One in that thread - just a couple of WWE ones for Developer Editions. Should I use an AT&T one? I can change the CID back to whatever is needed.
Am I able to do this somehow with the Nandroid backup for Rogers in that thread?
Also - What do you mean by "check for the red lines" exactly? I am on HBoot 1.54, Is there a easy way of going back to 1.44?
Sorry for all the questions - I'm kinda annoyed there isn't a Rogers RUU available. Last thing I need is a bricked phone - I'm only selling it as I honestly I shouldn't have bought it to begin with (Financially)
Where are you going to try and sell it? If to another user in Canada with one of those carriers, then they wouldn't to buy the unit with a AT&T image on it, I would think.
However running the ATT one would be a very easy way to reset everything including the hboot (no worry about red lines if run the RUU). Then you could sell to a US buyer who is going to use ATT (Tmobile also has a RUU). My guide for reseting to ATT:
http://forum.xda-developers.com/showthread.php?p=43458497
There are some threads around here where users are resetting Rodgers back to stock but it is much harder without a RUU and I am not sure of your comfort level.
To use one of the Rodgers Nandroids to do a complete reset to stock I would:
Change the CID to CWS__001 and run the ATT RUU to reset all your firmware, hboot etc, back to stock. You will still have unlocked bootloader and s-off, so you can then change back to your stock CID and then use the fastboot command to boot (but not install) a custom recovery in order to restore the Rodgers Nandroid and then just relock and s-on. Should be 100% Rodgers stock.
Code:
fastboot boot yourcustomrecovery.img
You can only use this method to boot a recovery without installing it, if on hboot 1.44, so that is why I recommend using the RUU to downgrade all that stuff for you.
Let me know if you need more help. I'd be happy to guide you.
Crush
PS - Love your Avatar. You should change your location to "Parts Unknown" to complete the joke. I may have to bust out a Conky avatar now!
bigystyle84 said:
Thanks for the help.
Which specific RUU should I flash? I don't see a Generic WWE One in that thread - just a couple of WWE ones for Developer Editions. Should I use an AT&T one? I can change the CID back to whatever is needed.
Click to expand...
Click to collapse
you could take the latest open europe RUU (RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7), or take an AT&T one.. don't really know which one would be better for your situation you'll know it better
Am I able to do this somehow with the Nandroid backup for Rogers in that thread?
Click to expand...
Click to collapse
this is also an option. you can flash this nandroid backup through cwm recovery. but then you'd have to manually install stock recovery and lock the bootloader/go back to s-on. why not :good:
Also - What do you mean by "check for the red lines" exactly? I am on HBoot 1.54, Is there a easy way of going back to 1.44?
Click to expand...
Click to collapse
you can stay on 1.54 if everything works fine after flashing the older firmware. the "warning text" is related to this thread: http://forum.xda-developers.com/showthread.php?t=2316726
but if you've never installed a custom HBoot you don't have to worry about this when going back to s-on. just check once if the red warning text in the bootscreen is there.
Sorry for all the questions - I'm kinda annoyed there isn't a Rogers RUU available. Last thing I need is a bricked phone - I'm only selling it as I honestly I shouldn't have bought it to begin with (Financially)
Click to expand...
Click to collapse
hope it works :fingers-crossed:
crushalot said:
Where are you going to try and sell it? If to another user in Canada with one of those carriers, then they wouldn't to buy the unit with a AT&T image on it, I would think.
However running the ATT one would be a very easy way to reset everything including the hboot (no worry about red lines if run the RUU). Then you could sell to a US buyer who is going to use ATT (Tmobile also has a RUU). My guide for reseting to ATT:
http://forum.xda-developers.com/showthread.php?p=43458497
There are some threads around here where users are resetting Rodgers back to stock but it is much harder without a RUU and I am not sure of your comfort level.
To use one of the Rodgers Nandroids to do a complete reset to stock I would:
Change the CID to CWS__001 and run the ATT RUU to reset all your firmware, hboot etc, back to stock. You will still have unlocked bootloader and s-off, so you can then change back to your stock CID and then use the fastboot command to boot (but not install) a custom recovery in order to restore the Rodgers Nandroid and then just relock and s-on. Should be 100% Rodgers stock.
Code:
fastboot boot yourcustomrecovery.img
You can only use this method to boot a recovery without installing it, if on hboot 1.44, so that is why I recommend using the RUU to downgrade all that stuff for you.
Let me know if you need more help. I'd be happy to guide you.
Crush
PS - Love your Avatar. You should change your location to "Parts Unknown" to complete the joke. I may have to bust out a Conky avatar now!
Click to expand...
Click to collapse
Hey, I'm trying to do the same thing as OP, and this thread has been the closest thing to my issue. I'm trying to return everything on my phone to stock, however my Canadian carrier is Bell. Currently my HTC One has the bootloader unlocked, is rooted, TWRP recovery, and TrickDroid installed.
If I understand your instructions correctly, what I should do (given I want to restore using a nandroid backup) is:
1) S-Off my phone
2) Change the CID to CWS___001 and run the ATT RUU
3) Change the CID back to my original (BM_001 is what I think it is, do you know how I can make sure? What command to run for ADB?)
4) The Nandroid backup from http://forum.xda-developers.com/showthread.php?t=2207874&highlight=bell+update for my phone is for CWM (it's this one: M7 CWM Nandroid Backup / CID BM___001 / 1.29.666.5), does that mean I have to change my recovery from TWRP to CWM at this point?
5) Use fastboot to boot the recovery --> two questions regarding this, 1) why would I not install the .zip I downloaded from step 4? 2) where do I get the recovery.img? Just the one that is in the zip? In which case, shouldn't I also has to boot the boot.img or anything else?
6) I also want to upgrade the radio, should that be done last?
Thanks for all your help!
Lastly, I'm looking for a ROM to flash afterwards, I was wondering if you had any suggestions/know of a ROM that can allow me to use the swipe2sleep features, as well as hold the back touch button to force kill an app.
Just sell it on swappa. They love rooted unlocked modded phones.
hello every one this is my first post i need some help please.
i bought a htc one preowned and i have since been in settings and its running a custom rom
android revolution hd 12.1 by mike 1986
my phone cid is htc_001
how do i return it to stock htc os
i have read a few posts before posting here i no i have to re lock bootloader then flash the ruu
i was wondering is there an easier way to relock bootloader and flash the ruu could some one also point me in the right direction
to which ruu to download with a link if possible to download.
thanks in advance for any help u may give with some simple instructions that i can understand as this is new to me and do not want to
make a mistake.
thankyou.
Is it S-OFF at the moment?
EddyOS said:
Is it S-OFF at the moment?
Click to expand...
Click to collapse
says m7_UL PVT SHIP S-OFF RH
CID-11111111
HBOOT-1.44.0000
RADIO-4a.18.3263.15
openDSP-v26.120.274.0202
eMMC-boot
so im guessing so
You don't need to relock, if you're s-off you can run whatever RUU you like.
iElvis said:
You don't need to relock, if you're s-off you can run whatever RUU you like.
Click to expand...
Click to collapse
thnks for your help can u link me to the correct ruu if u dont mind been looking not sure which one to download
thanks very much for your help to all.
Infamouslimey said:
thnks for your help can u link me to the correct ruu if u dont mind been looking not sure which one to download
thanks very much for your help to all.
Click to expand...
Click to collapse
Where was the phone purchased and what was the carrier? It's possible your CID was changed.
Assuming htc__001 is correct, the RUU collection is here:
http://forum.xda-developers.com/showthread.php?p=39588860
There are no RUUs for 4.2, so this would mean downgrading. But you should then start getting OTAs.
Note that running a RUU will fully wipe the phone. So back up anything on it you want to keep.
iElvis said:
Where was the phone purchased and what was the carrier? It's possible your CID was changed.
Assuming htc__001 is correct, the RUU collection is here:
http://forum.xda-developers.com/showthread.php?p=39588860
There are no RUUs for 4.2, so this would mean downgrading. But you should then start getting OTAs.
Click to expand...
Click to collapse
will i ran cid getter and it tells me the cid is htc_001
but in above post its cid_11111111
Infamouslimey said:
will i ran cid getter and it tells me the cid is htc_001
but in above post its cid_11111111
Click to expand...
Click to collapse
You have superCID, which means any RUU will run. You have the generic European model. CIDGetter is pulling the original cid from some system file, but it doesn't reflect the actual cid.
Infamouslimey said:
will i ran cid getter and it tells me the cid is htc_001
but in above post its cid_11111111
Click to expand...
Click to collapse
will this ruu work
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
Infamouslimey said:
will this ruu work
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
Click to expand...
Click to collapse
Yes, that's the one you want. You don't need to relock or anything being s-off. Just plug into your computer and run the ruu.
iElvis said:
Yes, that's the one you want. You don't need to relock or anything being s-off. Just plug into your computer and run the ruu.
Click to expand...
Click to collapse
thank you very much for all your help great site with such helpful members.
will this method re-lock bootloader and put s-off back to s-on or whatever its called ?
Infamouslimey said:
will this method re-lock bootloader and put s-off back to s-on or whatever its called ?
Click to expand...
Click to collapse
No and no. You have to do those manually, and there is no need to here.
if i wanted to re lock bootloader and put s back on how would i do it trying to learn so i dont have to keep asking for help ?
Infamouslimey said:
if i wanted to re lock bootloader and put s back on how would i do it trying to learn so i dont have to keep asking for help ?
Click to expand...
Click to collapse
That is a bit trickier and riskier since you don't know what was done to your phone before you bought it. I don't recommend going back to s-on because of this. However, running the correct RUU should put you back to safe stock.
Once the RUU has run and you've confirmed that the phone boots and is back to a stable stock configuration, you need to reboot and run a series of commands in fastboot:
fastboot oem writecid HTC__001
This will restore your stock CID. Note that there are two underscores there.
fastboot reboot-bootloader
Confirm on your bootloader screen that the CID is correct.
fastboot oem lock
This will relock your bootloader. Reboot again and confirm that it says "LOCKED" on your bootloader (Not "RELOCKED"). Boot up your phone and confirm that everything seems to be running correctly. You may want to give this a few days. Then reboot to bootloader when you're comfortable with it.
fastboot oem writesecureflag 3
This will put you back to s-on. When you reboot from here, your bootloader should say LOCKED and S-ON as if it was out of the box.
iElvis said:
That is a bit trickier and riskier since you don't know what was done to your phone before you bought it. I don't recommend going back to s-on because of this. However, running the correct RUU should put you back to safe stock.
Once the RUU has run and you've confirmed that the phone boots and is back to a stable stock configuration, you need to reboot and run a series of commands in fastboot:
fastboot oem writecid HTC__001
This will restore your stock CID. Note that there are two underscores there.
fastboot reboot-bootloader
Confirm on your bootloader screen that the CID is correct.
fastboot oem lock
This will relock your bootloader. Reboot again and confirm that it says "LOCKED" on your bootloader (Not "RELOCKED"). Boot up your phone and confirm that everything seems to be running correctly. You may want to give this a few days. Then reboot to bootloader when you're comfortable with it.
fastboot oem writesecureflag 3
This will put you back to s-on. When you reboot from here, your bootloader should say LOCKED and S-ON as if it was out of the box.
Click to expand...
Click to collapse
thanks very much for all your help ill install the fastboot files anyway so if need them there there.
many thanks
I too need to put my T-mobile HTC One back to stock somehow, but don't even know where to start, I saw this thread so I didn't want to clutter up the subforum, and thought that maybe I should ask here. I'm at 1.27.531.11, S-ON, rooted w/ unlocked bootloader, and would like to make it look like nothing happened to it when I return it to the store tomorrow. Could you please give me some pointers?
N0wy0ud1e said:
I too need to put my T-mobile HTC One back to stock somehow, but don't even know where to start, I saw this thread so I didn't want to clutter up the subforum, and thought that maybe I should ask here. I'm at 1.27.531.11, S-ON, rooted w/ unlocked bootloader, and would like to make it look like nothing happened to it when I return it to the store tomorrow. Could you please give me some pointers?
Click to expand...
Click to collapse
You need to s-off first or it will say "RELOCKED" on the bootloader. Problem is you may or may not be able to s-off right now. There is a new T-Mo exploit that supposedly works but I know nothing about it.
Once you do that, you can run an older RUU, which will remove the TAMPERED from the bootloader, then relock and s-on as described above.
iElvis said:
You need to s-off first or it will say "RELOCKED" on the bootloader. Problem is you may or may not be able to s-off right now. There is a new T-Mo exploit that supposedly works but I know nothing about it.
Once you do that, you can run an older RUU, which will remove the TAMPERED from the bootloader, then relock and s-on as described above.
Click to expand...
Click to collapse
Crap. Well I know they're not going to check the bootloader lol, just that when you turn on the phone, you'll see the red text at the bottom saying "Developmental purposes" and I can't remember the rest of the message. Can I make that disappear so it just shows nothing on the white background but the green HTC logo? Btw thanks for the reply.
N0wy0ud1e said:
Crap. Well I know they're not going to check the bootloader lol, just that when you turn on the phone, you'll see the red text at the bottom saying "Developmental purposes" and I can't remember the rest of the message. Can I make that disappear so it just shows nothing on the white background but the green HTC logo? Btw thanks for the reply.
Click to expand...
Click to collapse
That goes away when you relock.
Alright, I've been through thread after thread and plenty of pages found on google.
Some say to Lock the bootloader BEFORE using the RUU and some say to lock it AFTER or you'll brick the phone?
I've got a T-mobile Variant of the HTC one M7 It's rooted, SuperCID and obviously the bootloader is unlocked.... I think it's on 1.55, not exactly sure, I'm currently backing up all my data.
I've got the new 5.14.531.1 RUU straight from the HTC website.
Since it's a Tmobile rom, I'm guessing resetting the CID to T-MOB010 before installing would be a good idea?
And what of the bootloader? running the RUU should install the new Hboot correct? from there I would just need to relock it or am I not understanding this?
~Out of all my phones I've NEVER returned one to stock, so this is all kinda new to me.
Vonrottes said:
I've got the new 5.14.531.1 RUU straight from the HTC website.
Click to expand...
Click to collapse
SuperCID means you're S-Off, so no need to lock/relock bootloader, but where did you get that RUU from? link please, cause I don't think it's an RUU (how big is the file??)
nkk71 said:
SuperCID means you're S-Off, so no need to lock/relock bootloader, but where did you get that RUU from? link please, cause I don't think it's an RUU (how big is the file??)
Click to expand...
Click to collapse
Doesn't exactly answer the question... I'm going back to stock to upgrade my phone...
So, I do need to relock the bootloader & reset the CID at some point.
Also the link, right from HTC
http://dl3.htc.com/application/RUU_M7UL_TMOUS_5.14.531.1_With Partial.exe
it's a whooping 1.49GB
Vonrottes said:
Doesn't exactly answer the question... I'm going back to stock to upgrade my phone...
So, I do need to relock the bootloader & reset the CID at some point.
Also the link, right from HTC
http://dl3.htc.com/application/RUU_M7UL_TMOUS_5.14.531.1_With Partial.exe
it's a whooping 1.49GB
Click to expand...
Click to collapse
ah ok, 1.49GB sounds good for an RUU
and to answer your question differently, if you are S-Off, then you do not need to lock/relock bootloader; the RUU should work fine with unlocked bootloader
refer to "Not so FAQ #2": http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
and remember to stay S-Off
nkk71 said:
ah ok, 1.49GB sounds good for an RUU
and to answer your question differently, if you are S-Off, then you do not need to lock/relock bootloader; the RUU should work fine with unlocked bootloader
refer to "Not so FAQ #2": http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
and remember to stay S-Off
Click to expand...
Click to collapse
Jolly good, I didn't even see that Not so FAQ.
So basically I just run the RUU according to the instructions on the HTC page ( http://www.htc.com/us/support/news.aspx?p_id=630&p_name=htc-one-t-mobile ) and I should be good?
Vonrottes said:
Jolly good, I didn't even see that Not so FAQ.
So basically I just run the RUU according to the instructions on the HTC page ( http://www.htc.com/us/support/news.aspx?p_id=630&p_name=htc-one-t-mobile ) and I should be good?
Click to expand...
Click to collapse
hmm, i can't seem to be able open that web page, but if the file is a full RUU (I'm downloading it, but with my connection it's gonna take quite a while), then hook up the phone, and run the RUU and all should be good.
Remember an RUU will fully wipe your phone (including sdcard/internal storage), and if for whatever reason you want to change bootloader to the original LOCKED (not relocked),
you can use this tool: http://forum.xda-developers.com/showthread.php?t=2527194
(though I don't see any reason to do it )
as long as you stay S-Off, you can easily get it unlocked again anytime
out of curiosity, any particular reason you're doing this?
nkk71 said:
hmm, i can't seem to be able open that web page, but if the file is a full RUU (I'm downloading it, but with my connection it's gonna take quite a while), then hook up the phone, and run the RUU and all should be good.
Remember an RUU will fully wipe your phone (including sdcard/internal storage), and if for whatever reason you want to change bootloader to the original LOCKED (not relocked),
you can use this tool: http://forum.xda-developers.com/showthread.php?t=2527194
(though I don't see any reason to do it )
as long as you stay S-Off, you can easily get it unlocked again anytime
out of curiosity, any particular reason you're doing this?
Click to expand...
Click to collapse
I know, that's why I'm currently backing up everything important on Google Drive.
I was just looking at Scotty1223's threads with the ADB commands to remove tampered flag and reset locked.
and like I said in my second post
I'm going back to stock to upgrade my phone...
So, I do need to relock the bootloader & reset the CID at some point.
So to go back stock with no need to ever unlock or root again,
I'll be fine LOCKING the bootloader and resetting the CID to T-MOB010 Before running the RUU?
Vonrottes said:
I know, that's why I'm currently backing up everything important on Google Drive.
I was just looking at Scotty1223's threads with the ADB commands to remove tampered flag and reset locked.
and like I said in my second post
I'm going back to stock to upgrade my phone...
So, I do need to relock the bootloader & reset the CID at some point.
So to go back stock with no need to ever unlock or root again,
I'll be fine LOCKING the bootloader and resetting the CID to T-MOB010 Before running the RUU?
Click to expand...
Click to collapse
I understood the part about upgrading your phone, but seeing your signature, you're running a custom ROM and kernel, so i'm not clear what you mean by upgrading
Anyway, if you are going back to stock, here's what I personally would do:
1- stay S-OFF
2- change CID back to original
3- remove TAMPERED and set LOCKED (using scotty1223's commands, or the Guru Bootloader Reset tool) not because it's necessary, just aesthetically more stock
4- run the RUU
5- stay S-OFF
nkk71 said:
I understood the part about upgrading your phone, but seeing your signature, you're running a custom ROM and kernel, so i'm not clear what you mean by upgrading
Anyway, if you are going back to stock, here's what I personally would do:
1- stay S-OFF
2- change CID back to original
3- remove TAMPERED and set LOCKED (using scotty1223's commands, or the Guru Bootloader Reset tool) not because it's necessary, just aesthetically more stock
4- run the RUU
5- stay S-OFF
Click to expand...
Click to collapse
Upgrading as in:
http://www.t-mobile.com/phone-upgrade.html
To get an HTC One M8 I have turn in my Current M7... Which has to be stock...as far as the T-mobile store tech needs to know.... I guess?
Vonrottes said:
Upgrading as in:
http://www.t-mobile.com/phone-upgrade.html
To get an HTC One M8 I have turn in my Current M7... Which has to be stock...as far as the T-mobile store tech needs to know.... I guess?
Click to expand...
Click to collapse
gotcha :good:
that's a completely different kind of upgrade, i thought you meant software
Do they care about S-OFF?? because if you intend on going S-ON, then I would highly recommend a 1.xx ruu, nothing higher.
because going from S-Off to S-On on hboot 1.55+, has been known to trigger "tamper detected - rebooting" and TAMPERED is back in bootloader screen.
nkk71 said:
gotcha :good:
that's a completely different kind of upgrade, i thought you meant software
Do they care about S-OFF?? because if you intend on going S-ON, then I would highly recommend a 1.xx ruu, nothing higher.
because going from S-Off to S-On on hboot 1.55+, has been known to trigger "tamper detected - rebooting" and TAMPERED is back in bootloader screen.
Click to expand...
Click to collapse
Yeah, it's gonna need to be S-on when I take it into the store...
Pretty sure they check the bootloader for S-ON, ***TAMPERED*** and ***LOCKED***
Is it just the 1.55+ Hboot that throws the tampered when locked?
If so Can I flash the 1.54.401.5 Hboot from Firewater and proceed like that?
Can't do the 1.44, My PC is running 8.1 and I've not played with Linux since 2009
Vonrottes said:
Yeah, it's gonna need to be S-on when I take it into the store...
Pretty sure they check the bootloader for S-ON, ***TAMPERED*** and ***LOCKED***
Click to expand...
Click to collapse
In that case, I recommend you use a 1.xx RUU
(check my guide in my signature)
Vonrottes said:
Is it just the 1.55+ Hboot that throws the tampered when locked?
Click to expand...
Click to collapse
Unknown when/what exactly triggers the "tamper detected" or some people have been able to S-On and not get that, others have not, so I can't say if it will happen or not. but if you wanna play it safe, go for 1.xx ruu.
Vonrottes said:
If so Can I flash the 1.54.401.5 Hboot from Firewater and proceed like that?
Click to expand...
Click to collapse
brick alert: Definitely NOT, that is a custom HBOOT, if you actually manage to S-On it with an unsigned hboot, you'll have an paperweight on your hands!! stay away from that.
I have a HTC One on the EE network in the UK and I am still currently on Android 4.3 and Sense 5.5, they haven't bothered to release Android 4.4 yet and I have no hope that they will release Sense 6.
So, I would like to know how to go about changing my EE branded phone into an Unlocked International Version so that I can receive OTA updates direct from HTC.
Current CID: ORANG001
Current Hboot: 1.55
Current Software Number: 3.63.61.1
Radio: 4A.21.3263.04
Locked Bootloader with S-On
I would very much appreciate any help you can give.
Thank-You
rh92 said:
I have a HTC One on the EE network in the UK and I am still currently on Android 4.3 and Sense 5.5, they haven't bothered to release Android 4.4 yet and I have no hope that they will release Sense 6.
So, I would like to know how to go about changing my EE branded phone into an Unlocked International Version so that I can receive OTA updates direct from HTC.
Current CID: ORANG001
Current Hboot: 1.55
Current Software Number: 3.63.61.1
Radio: 4A.21.3263.04
Locked Bootloader with S-On
I would very much appreciate any help you can give.
Thank-You
Click to expand...
Click to collapse
first of all you need to unlock your bootloader and s-off your phone, debrand is not possible with s=on
the you would need to change your cid to something like HTC__001 or developer edition cid, one fastboot command required to do this.
and then run the correct RUU for those cid's and your done.
its quite easy to do, the hardest part is getting s-off, however you may be ok on 1.55 hboot, try rumrunner, read the instructions and download the required file here: http://rumrunner.us/
Seanie280672 said:
first of all you need to unlock your bootloader and s-off your phone, debrand is not possible with s=on
the you would need to change your cid to something like HTC__001 or developer edition cid, one fastboot command required to do this.
and then run the correct RUU for those cid's and your done.
its quite easy to do, the hardest part is getting s-off, however you may be ok on 1.55 hboot, try rumrunner, read the instructions and download the required file here: http://rumrunner.us/
Click to expand...
Click to collapse
Do I need custom recovery? If so which is best.
And do I need to have a custom ROM installed to gain s-off or can s-off be achieved on my current EE branded ROM?
Thanks
rh92 said:
Do I need custom recovery? If so which is best.
And do I need to have a custom ROM installed to gain s-off or can s-off be achieved on my current EE branded ROM?
Thanks
Click to expand...
Click to collapse
nope its not required for either, you should be able to s-off on stock rom, if you get an error or for some reason it fails, then you MAY have to flash a custom recovery and custom rom / kernel.
The RUU's will put you back to fully stock anyway in the end.
Seanie280672 said:
nope its not required for either, you should be able to s-off on stock rom, if you get an error or for some reason it fails, then you MAY have to flash a custom recovery and custom rom / kernel.
The RUU's will put you back to fully stock anyway in the end.
Click to expand...
Click to collapse
If the s-off does cause an error or it fails, can this cause my device to get bricked?
And by fully stock do you mean that the RUU turns s-on and locks my boot loader? (just in case I need to send my phone in for repair).
Thanks
rh92 said:
If the s-off does cause an error or it fails, can this cause my device to get bricked?
And by fully stock do you mean that the RUU turns s-on and locks my boot loader? (just in case I need to send my phone in for repair).
Thanks
Click to expand...
Click to collapse
no your phone wont brick
and no the ruu wont turn your phone s-on, you will need to lock your bootloader before running the RUU, but that's one simple command too, but only after s-off.
all you need right now is to make sure you have the drivers installed and that your device is detected in windows both when booted into a rom and on the bootloader screen.
Seanie280672 said:
no your phone wont brick
and no the ruu wont turn your phone s-on, you will need to lock your bootloader before running the RUU, but that's one simple command too, but only after s-off.
all you need right now is to make sure you have the drivers installed and that your device is detected in windows both when booted into a rom and on the bootloader screen.
Click to expand...
Click to collapse
After installing the RUU how would I get s-on?
Thanks
rh92 said:
After installing the RUU how would I get s-on?
Thanks
Click to expand...
Click to collapse
don't s-on, never s-on simple as that.
Seanie280672 said:
don't s-on, never s-on simple as that.
Click to expand...
Click to collapse
Ok, I was just asking in case I needed to send my phone in for repair in the future.
rh92 said:
Ok, I was just asking in case I needed to send my phone in for repair in the future.
Click to expand...
Click to collapse
not really something they will check to be honest, but if you s-on and you've played about with your phone down the line, like flashed a modified firmware or hboot, you will get an instant brick, if your hboot version is too high you will get the tampered flag back, or if you make a mistake along the way and the fix requires s-off, it will be very difficult to get again.
Seanie280672 said:
not really something they will check to be honest, but if you s-on and you've played about with your phone down the line, like flashed a modified firmware or hboot, you will get an instant brick, if your hboot version is too high you will get the tampered flag back, or if you make a mistake along the way and the fix requires s-off, it will be very difficult to get again.
Click to expand...
Click to collapse
So, is the following step by step list correct.
1. Unlock boot loader
2. Get s-off via rumrunner
3. Change CID
4. Lock boot loader
5. Run RUU
And, I am currently on 4.3 and Sense 5.5, so can I go straight to the sense 6 and Android 4.4 RUU, or do I have to install the sense 5.5 and Android 4.4 RUU first.
Thanks
rh92 said:
So, is the following step by step list correct.
1. Unlock boot loader
2. Get s-off via rumrunner
3. Change CID
4. Lock boot loader
5. Run RUU
And, I am currently on 4.3 and Sense 5.5, so can I go straight to the sense 6 and Android 4.4 RUU, or do I have to install the sense 5.5 and Android 4.4 RUU first.
Thanks
Click to expand...
Click to collapse
yup that's the correct order, and you will have to use this RUU as its the only full RUU available, everything else is just OTA's
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
Seanie280672 said:
yup that's the correct order, and you will have to use this RUU as its the only full RUU available, everything else is just OTA's
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
Click to expand...
Click to collapse
And after installing this RUU I can just download Sense 6 via OTA.
rh92 said:
And after installing this RUU I can just download Sense 6 via OTA.
Click to expand...
Click to collapse
yes, just accept the ota's one at a time.
Seanie280672 said:
yes, just accept the ota's one at a time.
Click to expand...
Click to collapse
Thanks for your help
I have an PN07200, how can I get sense 6, which will be the best RUU and CID?.... Thanks!
Enviado desde mi HTC One X+ mediante Tapatalk
is it possible to re-apply the branding?
i.e.
RUU
change cid
OTA with brand change
gwaitsi said:
is it possible to re-apply the branding?
i.e.
RUU
change cid
OTA with brand change
Click to expand...
Click to collapse
yup, change your cid to its original one, and find your service providers RUU and flash it.
Hi all, I was just wondering if I should run the RUU ZIP or EXE if I am on S-OFF.
I currently have the 6.06.401.1 firmware along with the stock 6.06.401.1 rom. I need to return to the stock 1.29.707.1 for my HTC__044 before taking the latest OTA to Android Lollipop.
So far, I have used my S-OFF to change my bootloader to *LOCKED* and flashed stock recovery and stock rom for the 6.06.401.1.
I currently have both the 1.29.707.1 RUU EXE and ZIP. Which one should I use? I read that I need to have the 1.44 Hboot but I currently have the 1.54 Hboot.
Halp?
uhm, what? this is nonsense , the lastest available RUU is "4.19.401.9" which must be flashed under hboot 1.56 ... there is no need to go to initial release of android 4.1!
WARNING!!! YOU MUST FLASH HBOOT 1.56 BEFORE APPLYING 4.19.401.9 RUU
RUU: http://d-h.st/KmT
+There is no need to LOCK your bootloader to get an OTA update... Mine is always unlocked and never had a problem with OTA's
+RUU's work only under S-OFF
Androidian10 said:
Hi all, I was just wondering if I should run the RUU ZIP or EXE if I am on S-OFF.
I currently have the 6.06.401.1 firmware along with the stock 6.06.401.1 rom. I need to return to the stock 1.29.707.1 for my HTC__044 before taking the latest OTA to Android Lollipop.
So far, I have used my S-OFF to change my bootloader to *LOCKED* and flashed stock recovery and stock rom for the 6.06.401.1.
I currently have both the 4.20.707.1 RUU EXE and ZIP. Which one should I use? I read that I need to have the 1.44 Hboot but I currently have the 1.54 Hboot.
Halp?
Click to expand...
Click to collapse
you can use the RUU you have fine 4.20.707.1, you'll just have to make sure your cid and mid match first, and also just flash the 4.20.707.1 firmware first, this will put you on the correct HBOOT and system files for the RUU, no need to lock your bootloader with s-off.
or you can skip all of that and just flash the 7.19.401.2 RUU right now as your phone is as your already on the 6.xx.401.x firmware.
you don't really have any reason to back flash.
Seanie280672 said:
you can use the RUU you have fine 4.20.707.1, you'll just have to make sure your cid and mid match first, and also just flash the 4.20.707.1 firmware first, this will put you on the correct HBOOT and system files for the RUU, no need to lock your bootloader with s-off.
or you can skip all of that and just flash the 7.19.401.2 RUU right now as your phone is as your already on the 6.xx.401.x firmware.
you don't really have any reason to back flash.
Click to expand...
Click to collapse
But I can't seem to find a 4.20.707.1 RUU. I only have the 1.29.707.3 firmware. I need a region specific one because I need to trade my phone in.
Could you point me in the direction of a 4.20.707.1 RUU zip?
Also, is it safe to OTA update if I flash back to 1.29 with S-OFF?
Edit: Crap I made a typo in my OP, I mean that I have the 1.29 RUU EXE and ZIP right now.
Androidian10 said:
But I can't seem to find a 4.20.707.1 RUU. I only have the 1.29.707.3 firmware. I need a region specific one because I need to trade my phone in.
Edit: Crap I made a typo in my OP, I mean that I have the 1.29 RUU EXE and ZIP right now.
Could you point me in the direction of a 4.20.707.1 RUU zip?
Also, is it safe to OTA update if I flash back to 1.29 with S-OFF?
Click to expand...
Click to collapse
I thought you said you had the 4.20.707.1 RUU
if not then you'll have to use the 1.29.707 one that you have, you'll just have to flash the 1.44 hboot first or the firmware that matches the RUU.
Seanie280672 said:
I thought you said you had the 4.20.707.1 RUU
if not then you'll have to use the 1.29.707 one that you have, you'll just have to flash the 1.44 hboot first or the firmware that matches the RUU.
Click to expand...
Click to collapse
Yeah I had a typo.
So yeah, I have both the EXE and ZIP RUU.
I'm thinking that the ZIP RUU has the 1.44 hboot no?
Also, most importantly, can I take official OTA updates while I am S-OFFed?
Androidian10 said:
Yeah I had a typo.
So yeah, I have both the EXE and ZIP RUU.
I'm thinking that the ZIP RUU has the 1.44 hboot no?
Also, most importantly, can I take official OTA updates while I am S-OFFed?
Click to expand...
Click to collapse
yes you can take OTA's whilst s-off, do not go s-on at any point.
I would also say try the RUU.zip first.
Seanie280672 said:
yes you can take OTA's whilst s-off, do not go s-on at any point.
I would also say try the RUU.zip first.
Click to expand...
Click to collapse
Righto. Will report back again.
I hope the guy at the store doesn't go into the bootloader when I trade my m7 in. Even then I already set the flag to locked so I think he'll miss that S-OFF portion.
Androidian10 said:
Righto. Will report back again.
I hope the guy at the store doesn't go into the bootloader when I trade my m7 in. Even then I already set the flag to locked so I think he'll miss that S-OFF portion.
Click to expand...
Click to collapse
cid and mid need to match the ruu your flashing first.
Seanie280672 said:
cid and mid need to match the ruu your flashing first.
Click to expand...
Click to collapse
Already checked with fastboot getvar all.
Seanie280672 said:
cid and mid need to match the ruu your flashing first.
Click to expand...
Click to collapse
Actually, problem. :/
I have a matching CID which is HTC__044 but the modelid is PN0714000.
The RUU's android-info has a matching CID of HTC__044 but a modelid of PN0711000.
What now?
Androidian10 said:
Actually, problem. :/
I have a matching CID which is HTC__044 but the modelid is PN0714000.
The RUU's android-info has a matching CID of HTC__044 but a modelid of PN0711000.
What now?
Click to expand...
Click to collapse
unlock your bootloader, flash twrp recovery and change your mid, are you sure your using the RUU for the M7_UL as that looks a lot like the M7_U mid too me, can you give me a link for the RUU's you downloaded please.
---------- Post added at 11:05 AM ---------- Previous post was at 10:57 AM ----------
here you go, do this instead, this is going to be a bit backwards and forwards.
Unlock your bootloader, and flash TWRP recovery, then use the mid change tool to change your mid to the correct one.
https://www.androidfilehost.com/?fid=23622183712469376
next copy this guru reset file to your internal storage and flash it, select no to stock radio and no to stock recovery: http://www.htc1guru.com/2013/11/guru-reset-3-63-707-4-stock-rom/
now lock your bootloader
and finally flash the matching firmwqare from here: http://d-h.st/BWu this will put stock recovery and stock radio on your phone.
Seanie280672 said:
unlock your bootloader, flash twrp recovery and change your mid, are you sure your using the RUU for the M7_UL as that looks a lot like the M7_U mid too me, can you give me a link for the RUU's you downloaded please.
Click to expand...
Click to collapse
I actually ran the RUU. It's now stuck on waiting for device after the usual flush after 90 hboot pre-update.
I changed the modelid in the android-info.txt since it was decrypted.
Anyone help me?
My computer can't see the device anymore after flashing the hboot!
Androidian10 said:
Anyone help me?
My computer can't see the device anymore after flashing the hboot!
Click to expand...
Click to collapse
if your using windows 8 or higher then that's the problem, HBOOT 1.44 doesn't work with it, there is a fix around here somewhere by @clsA but ive never had to use it myself.
trouble with changing the android-info text file is all of the OTA's will fail due to you having the wrong mid on your phone, you'll have to change your phones mid as soon as possible.
Seanie280672 said:
if your using windows 8 or higher then that's the problem, HBOOT 1.44 doesn't work with it, there is a fix around here somewhere by @clsA but ive never had to use it myself.
trouble with changing the android-info text file is all of the OTA's will fail due to you having the wrong mid on your phone, you'll have to change your phones mid as soon as possible.
Click to expand...
Click to collapse
Ok, I have changed to an old Windows 7 laptop and tried doing the fastboot flash zip again. After I press enter, nothing happens at all. Not a single code at all. Just a blinker.
Edit: Started moving again. Phew. I almost had a heart attack.
So now do I do the fastboot writemid command?
Androidian10 said:
Ok, I have changed to an old Windows 7 laptop and tried doing the fastboot flash zip again. After I press enter, nothing happens at all. Not a single code at all. Just a blinker.
Edit: Started moving again. Phew. I almost had a heart attack.
So now do I do the fastboot writemid command?
Click to expand...
Click to collapse
to change the mid you need to use the mid change tool I posted a link to it earlier, install it inside twrp recovery then select the mid you require from the list it gives you.
Seanie280672 said:
to change the mid you need to use the mid change tool I posted a link to it earlier, install it inside twrp recovery then select the mid you require from the list it gives you.
Click to expand...
Click to collapse
It's okay now. I found a matching mid RUU for my phone.
But my question now is should I go S-ON to remove the red "This is a test device. Accordingly, to collect critical information about the device, Tell HTC is enabled and cannot be turned off regardless of device settings" warning? Or just leave it S-OFF and hope that the techies at the store doesn't notice it?
More questions
I have done all the OTAs now so should I do the fastboot oem writesecureflag 3 as the final step before putting the phone aside to trade it in?
Androidian10 said:
More questions
I have done all the OTAs now so should I do the fastboot oem writesecureflag 3 as the final step before putting the phone aside to trade it in?
Click to expand...
Click to collapse
no, leave it s-off, if you turn it back s-on now you will get the tampered flag back.