Database Develop

Android One Rom w/ working recovery + TWRP & ROOT [SP Flash Tool]

I have fixed the bug in some Android One roms that prevented you from booting into recovery.
You can now boot into recovery by holding volume + and power button.
** You can still not unlock bootloader in fastboot, volume buttons is disabled for this function **
Please download X510-A1-FIX-20150824.7z from here and extract.
Make sure you have SP Flash Tool to continue.
-------------------------------------------------
Install Android One Rom
-------------------------------------------------
1. Open SP Flash Tool and click on the Format Tab and then press the Start button.
2. Once complete disconnect your usb cable and re insert it again.
3. Click on Download tab and load the MT6580_Android_scatter.txt scatter file from the extracted archive.
4. Click the Download button.
5. Once complete you can boot as normal or proceed to install TWRP Recovery
-------------------------------------------------
Install TWRP Recovery
-------------------------------------------------
If you would like TWRP recovery installed please replace recovery.img inside the extracted folder with recovery-twrp.img before flashing.
*** Don't forget to rename recovery-twrp.img to recovery.img ***
Once the recovery.img has been replaces with the TWRP Recovery image please follow the above instructions again.
-------------------------------------------------
ROOT
-------------------------------------------------
If you would like to be rooted please boot into TWRP recovery after flashing TWRP Recovery by holding volume + and power button
Once the TWRP recovery open it will ask you if you want if you want to use TWRP as read only.
To root we need read and write access so please proceed to write to system.
Once in TWRP recovery press Reboot and then press Bootloader and then you will be prompted to install root.
Once booted into fastboot please reboot the phone.

Are we still get OTA after install this ROM ?
Can you explain what is work in this ROM, because when i want to unlock bootloader the button didn't work

ArticK said:
Are we still get OTA after install this ROM ?
Can you explain what is work in this ROM, because when i want to unlock bootloader the button didn't work
Click to expand...
Click to collapse
I am not sure about OTA yet, maybe for OTA it will overwrite recovery and must do the process again.
Well before the android one rom you could not boot into recovery by holding vol + and power.
Unfortunately during the bootloader unlock process you cannot use the volume button.

anarchtic said:
I am not sure about OTA yet, maybe for OTA it will overwrite recovery and must do the process again.
Well before the android one rom you could not boot into recovery by holding vol + and power.
Unfortunately during the bootloader unlock process you cannot use the volume button.
Click to expand...
Click to collapse
It is mean this ROM only resolve for boot into recovery by holding vol + and power but not for vol button when unlock bootloader process asking confirmation yes/no .
I think you should noted in OP what is work in this ROM .

ArticK said:
It is mean this ROM only resolve for boot into recovery by holding vol + and power but not for vol button when unlock bootloader process asking confirmation yes/no .
I think you should noted in OP what is work in this ROM .
Click to expand...
Click to collapse
yes your right, and I will edit

anarchtic said:
I have fixed the bug in some Android One roms that prevented you from booting into recovery.
You can now boot into recovery by holding volume + and power button.
** You can still not unlock bootloader in fastboot, volume buttons is disabled for this function **
Please download X510-A1-FIX-20150824.7z from here and extract.
Make sure you have SP Flash Tool to continue.
-------------------------------------------------
Install Android One Rom
-------------------------------------------------
1. Open SP Flash Tool and click on the Format Tab and then press the Start button.
2. Once complete disconnect your usb cable and re insert it again.
3. Click on Download tab and load the MT6580_Android_scatter.txt scatter file from the extracted archive.
4. Click the Download button.
5. Once complete you can boot as normal or proceed to install TWRP Recovery
-------------------------------------------------
Install TWRP Recovery
-------------------------------------------------
If you would like TWRP recovery installed please replace recovery.img inside the extracted folder with recovery-twrp.img before flashing.
*** Don't forget to rename recovery-twrp.img to recovery.img ***
Once the recovery.img has been replaces with the TWRP Recovery image please follow the above instructions again.
-------------------------------------------------
ROOT
-------------------------------------------------
If you would like to be rooted please boot into TWRP recovery after flashing TWRP Recovery by holding volume + and power button
Once the TWRP recovery open it will ask you if you want if you want to use TWRP as read only.
To root we need read and write access so please proceed to write to system.
Once in TWRP recovery press Reboot and then press Bootloader and then you will be prompted to install root.
Once booted into fastboot please reboot the phone.
Click to expand...
Click to collapse
Pls boss I did not understand the procedure to root..u said when we click on reboot in twrp recovery we should den press bootloader and den it will prompt us to root.
Which button do I press to for the bootloader

i installed the rom from the mentioned link above, however , now when i press volume + & power, i go into a wired recovery, an image of an open android with red exclatmation mark with no text, no choices or nothing,
the reason i wanted recovery is to flash marshmallow on my 2gb ram x510, now there is nothing any clue ?

small problems make depressed
excuse all .
I was new here . and want to learn .
I have a problem with hot android 2 me.I can not enter into TWRP menu by turning off my android , and menghidupkanya by pressing a few buttons such as Vol +/- buttons with power button . no reaction .
is there any other way? or non- root application that can go directly to TWRP .
the position of an existing room in marshmallows , I want to root my android .:angel::angel::angel:

I worked all the steps but the device does not respond and the program does not do anything happens
What is the solution device does not work

I can't download the x510 rom. When I click on the download link, it takes me to Google Drive where I find 'Empty Folder' message. Please help.

How how boot into twrp custom recovery mode using infinix hot 4 lite, someone please help....

Dragunz said:
How how boot into twrp custom recovery mode using infinix hot 4 lite, someone please help....
Click to expand...
Click to collapse
What?

Help! cant enter recovery after flashing rom !

hey guys i really need your help after i flashed [ROM][Z1][5.1.1][LB/UB][.216]|Z5 Features|MX ROM|V7.8.0|Battery☆ life|☆[10/11/2015]☆ i cant seem to enter recovery anymore besides that after i flashed this rom everything inside wasnt working as expected to be would love to get some help from you kind souls :crying:

Did you try rto enter in recovery via NDR Utils?
Restart phone and when you phone shows Sony logo pres few times volume up or volu down key and you shuold go in to recovery.

You could use fasboot to boot a random kernel that includes recovery, and then from that recovery you can do the things you need to do.
Code:
fastboot boot kernel.img
This will boot the kernel, but not overwrite the one currently installed. So just reboot after you're done.

aquaboy11 said:
You could use fasboot to boot a random kernel that includes recovery, and then from that recovery you can do the things you need to do.
Code:
fastboot boot kernel.img
This will boot the kernel, but not overwrite the one currently installed. So just reboot after you're done.
Click to expand...
Click to collapse
Yes,I forget that.You should use Androplus kernel with goes with TWRP recovery.You dont need this fastboot script.Connect phone in fastboot mode and go to option in fasboot flash kernel and select file extension img than select boot.img file and that it is.
Sent from Xperia Z2 D6503

Allek84 said:
Yes,I forget that.You should use Androplus kernel with goes with TWRP recovery.You dont need this fastboot script.Connect phone in fastboot mode and go to option in fasboot flash kernel and select file extension img than select boot.img file and that it is.
Sent from Xperia Z2 D6503
Click to expand...
Click to collapse
Rude.

[Solved][HELP] Flashng twrp recovery through adb and accessing stock recovery problem

Hey Guys,
I just decided to install Twrp 3.0.2-2 and root my XT1092,
I have been facing issue right after flashing twrp, i select Recovery option in bootloader. Which just shuts down my phone.
After that i try to access recovery by booting into fastboot mode which again gives me a shutdown.
Later i discovered i could access stock recovery when my device is booted into the official mm rom. "adb reboot recovery"
Please help me guys. I tried fxz'ing and retrying the whole process. with different methods to no avail.
i even tried just rooting by only booting recovery "fastboot boot recovery.img" which again gives me a blank screen.
Any help would be really appreciated.
Device Details:
Moto XT1092
VICTARA_RETEU_XT1092_6.0_MPE24.49-18_cid7_CFC.xml
Regards,
Uzayr

Uzayr said:
Hey Guys,
I just decided to install Twrp 3.0.2-2 and root my XT1092,
I have been facing issue right after flashing twrp, i select Recovery option in bootloader. Which just shuts down my phone.
After that i try to access recovery by booting into fastboot mode which again gives me a shutdown.
Later i discovered i could access stock recovery when my device is booted into the official mm rom. "adb reboot recovery"
Please help me guys. I tried fxz'ing and retrying the whole process. with different methods to no avail.
i even tried just rooting by only booting recovery "fastboot boot recovery.img" which again gives me a blank screen.
Any help would be really appreciated.
Device Details:
Moto XT1092
VICTARA_RETEU_XT1092_6.0_MPE24.49-18_cid7_CFC.xml
Regards,
Uzayr
Click to expand...
Click to collapse
So you put the phone in bootloader mode:
fastboot flash recovery twrp-3.0.2-2-victara.img
Then you use only the volume rocker to select recovery (not the power button).
If the phone boots into stock Android, TWRP will be overwritten with stock recovery (which is useless), in which case you'll have to repeat the above.

same issue
on Verizon. Bootloader unlocked with code from Moto. Trying to use Windroid to finish up twrp install and root. I got a message in bootloader about mismatched partition size. tried ADB commands and said it installed. still won't work. no idea what to do next. was thinking of relocking and starting over but I would rather not. any suggestions? Thanks!

I have tried that as well. Used the volume rocker buttons to select recovery. I end up with a blank screen.
Tried fastboot flash recovery.img and I even tried mfastboot flash recovery as well.
Device just doesn't go to recovery after flashed through fastboot and selecting recovery.

Uzayr said:
I have tried that as well. Used the volume rocker buttons to select recovery. I end up with a blank screen.
Tried fastboot flash recovery.img and I even tried mfastboot flash recovery as well.
Device just doesn't go to recovery after flashed through fastboot and selecting recovery.
Click to expand...
Click to collapse
Is your bootloader unlocked? Maybe you should try reflashing the full stock firmware, and trying again.
https://firmware.center/firmware/Motorola/Moto X (2nd gen-2014)/Stock/

Gus Ghanem said:
So you put the phone in bootloader mode:
fastboot flash recovery twrp-3.0.2-2-victara.img
Then you use only the volume rocker to select recovery (not the power button).
If the phone boots into stock Android, TWRP will be overwritten with stock recovery (which is useless), in which case you'll have to repeat the above.
Click to expand...
Click to collapse
Gus Ghanem said:
Is your bootloader unlocked? Maybe you should try reflashing the full stock firmware, and trying again.
https://firmware.center/firmware/Motorola/Moto X (2nd gen-2014)/Stock/
Click to expand...
Click to collapse
Thanks a lot mate,
I had gone back to stock again. Finished with the recovery process.
I have been using the power button to select the highlighted option :silly: my bad.
Thanks for stressing that out.

[Q] Xperia V LT25i cannot enter TWRP recovery mode

Hi everyone,
My Xperia V LT25i cannot enter TWRP recovery mode.
I tried (VolDwn + Pwr) and (VolUp + Pwr) when it's off.
I also tried (adb reboot recovery) and (Boot to Recovery option in QuickReboot App) when it's on.
No luck entering TWRP.
The LED blinked in white for an instance then the phone just went on a normal booting.
This looks like a simple silly question but I have seriously dug into all the similar threads I can find and still no solutions.
Current status of my phone:
Model: LT25i
Android Ver.: 4.3
Firmware: 9.2.A.0.295
Bootloader unlocked: YES (checked by *#*#7378423#*#*)
Rooted: YES (rooted by towelroot and checked by Root Checker Basic)
TWRP installed: YES (flashed twrp-3.0.2-0-tsubasa.img into my phone using App Install Method)
The status of TWRP is not checked since I am not sure whether there's a way to do so.
I opened the app, made a recovery.img and saw it there under my sdcard folder (this means that TWRP is normally functioning right?).
My phone is in extremely good health, not bricked.
I just wanted to try the fantastic ROM StryFlex™ Marshmallow for Xperia V,
following the instructions step by step and got stuck at TWRP.
Please help and thanks for your time reading this thread

if it works like my Xperia Z you can try to put your Xperia T on fastboot. Then rename the TWRP.img to boot.img.
Then in plat-form tools folder open the terminal and type "fastboot flash boot boot.img". After that "fastboot reboot". After that the phone reboots automatically into TWRP

Ricky_Karmator said:
if it works like my Xperia Z you can try to put your Xperia T on fastboot. Then rename the TWRP.img to boot.img.
Then in plat-form tools folder open the terminal and type "fastboot flash boot boot.img". After that "fastboot reboot". After that the phone reboots automatically into TWRP
Click to expand...
Click to collapse
Hello,
Thanks for replying.
This method works perfectly. The device booted into TWRP.
But now I am facing the question that it wouldn't boot back to system @@.
Am I suppose to do the "fastboot flash boot boot.img" command again and flash back normal boot.img? (If yes, where can I find one?)
Or did I mess something up while flashing StryFlex™ ROM in TWRP?
Thanks for your time reading this thread!

It seems the default bootloader of this phone doesn't support entering recovery by press volumn button. Pressing volumn buttons on powering up is only functional when the phone is connected to PC, moreover, vol up+power will boot into fastboot mode, vol down+power will boot into flashmode which works with flashtool.
---------- Post added at 01:46 AM ---------- Previous post was at 01:25 AM ----------
if you are using stock rom, you should do the following steps to enter twrp:
1. Get flashtool ready on PC, and the drivers for your phone;
2. Connect your phone to PC;
3. Power up your phone by pressing vol up+power button to enter into fastboot mode;
4. In flashtool, flash twrp.img with fastboot flash mode;
5. reboot your phone, and it will boot into twrp;
6. when you want to get back to android, pull the kernel.sin out from FTF corresponds to your rom, and flash it in the same way while flashing twrp.img;
7. reboot your phone.

loudnut said:
Hello,
Thanks for replying.
This method works perfectly. The device booted into TWRP.
But now I am facing the question that it wouldn't boot back to system @@.
Am I suppose to do the "fastboot flash boot boot.img" command again and flash back normal boot.img? (If yes, where can I find one?)
Or did I mess something up while flashing StryFlex™ ROM in TWRP?
Thanks for your time reading this thread!
Click to expand...
Click to collapse
Be sure to download the right type of TWRP that supports booting system after you flash your custom ROM. Mine for example lets me flash Stryflex and after is automatically replaced by the standard one but nothing affects the stability of the ROM.
So you should check on TWRP official site the recovery, rename it into "boot.img", flash it though cmd and then restart in recovery. Do a clean flash (check also the repartition of data), flash ROM + Gapps and then reboot.
It works on my Xperia Z and also another Xperia T from a friend

Unable to flash twrp on Mi A2 running on pie

Hey there, I need help. I tried to flash latest twrp for Mi A2 but after flashing everything seems fine on command window but phone isn't booting in recovery mode. Either it get normal boot or get switched off completely , even if I try to boot into recovery by using volume up and power button , it shows 'no command' . I tried to flash magisk and it worked, but after every boot it root is getting lost automatically.. please help.. thanks

Amnvlad said:
Hey there, I need help. I tried to flash latest twrp for Mi A2 but after flashing everything seems fine on command window but phone isn't booting in recovery mode. Either it get normal boot or get switched off completely , even if I try to boot into recovery by using volume up and power button , it shows 'no command' . I tried to flash magisk and it worked, but after every boot it root is getting lost automatically.. please help.. thanks
Click to expand...
Click to collapse
Yes it's not easy to flash twrp on mi a2 , don't know why. What you do is go to this link (https://twrp.me/xiaomi/xiaomimia2.html) and download both .img and .zip file from there. Then get into fastboot mode and do the command -
fastboot boot twrp.img
Then it will boot into TWRP. And then flash TWRP.zip file and it will flash it permanently to your device. This step is mandatory so the stock recovery doesn't come back.
Hope this works !! Let me know if it helps !!