Related
Hey guys, I'm trying to push Android 5.0 to the Moto G 2014 in order to make a video for my channel (SupraPixel). I've got an XT1063 from Latin America (not bought on Amazon). Here's all the build info, etc.:
i. imgur(dot)com/sQjKe8M.png (had to edit it since I can't post links yet)
I've tried flashing XT1064 software, tried getting the OTA even from the retail.US ROM (both glb and aws) and other methods (adb, sdcard) to no avail. Naturally, I lost the radio capabilities so I had to switch back to a CID 12 ROM.
Has no XT1063 (not Amazon) user received 5.0 yet or am I doing something wrong?
Yes, I have read and tried basically every ROM found on the Moto G 2014 forums.
Thanks in advance.
---------
SOLVED:
wego_ said:
Global ROM: download Blur_Version.21.11.17.titan_retuglb.retuglb.en.US from here (thanks to lost101)
OTA Update: from this thread (thanks to Taimur Akmal & KennyWuLee)
Latinamerican ROM: take a look at this post (thanks to lost101 for this one too)
so basically i followed this guide.. (thanks savnex!!)
an advice.. make a full backup before start flashing the phone! good luck!
Click to expand...
Click to collapse
Flash new radio files like so:
mfastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
Nico, que tal, soy un suscriptor de tu canal xD has probado esto? http://www.htcmania.com/showthread.php?t=923441 , despues de flashear se pierde la señal, pero en un paso siguiente, dice que se flashea la baseband de la rom de latinoamerica levanta señal nuevamente, es para el 1064 de mexico, no se si funcionara para el 1063, pero por probar, no se pierde nada, yo tengo tambien el mismo xt1063 de claro, pero ahora no tengo buen internet para bajar las roms necesarias y probarlo, Saludos Eric
Hi guys.. i'm from argentina..i followed a guide to change the xt1063 latinamerican stock ROM (Claro AR) to the xt1063 global one (via fastboot and the bootloader must be unlocked) then i just update it with the OTA update file (via stock recovery).. after that my moto g (xt1063) was running lollipop fine but with the no signal problem.. so i flashed via fastboot two files: NON-HLOS.bin and fsg.mbn from stock latinamerican stock ROM (4.4.4).. and *tadaaaa*.. it worked..
wego_ said:
Hi guys.. i'm from argentina..i followed a guide to change the xt1063 latinamerican stock ROM (Claro AR) to the xt1063 global one (via fastboot and the bootloader must be unlocked) then i just update it with the OTA update file (via stock recovery).. after that my moto g (xt1063) was running lollipop fine but with the no signal problem.. so i flashed via fastboot two files: NON-HLOS.bin and fsg.mbn from stock latinamerican stock ROM (4.4.4).. and *tadaaaa*.. it worked..
Click to expand...
Click to collapse
Could you please link me to the exact same ROM you used for both Lollipop and the 4.4.4 KitKat for the radio?
Global ROM: download Blur_Version.21.11.17.titan_retuglb.retuglb.en.US from here (thanks to lost101)
OTA Update: from this thread (thanks to Taimur Akmal & KennyWuLee)
Latinamerican ROM: take a look at this post (thanks to lost101 for this one too)
so basically i followed this guide.. (thanks savnex!!)
an advice.. make a full backup before start flashing the phone! good luck!
wego_ said:
Hi guys.. i'm from argentina..i followed a guide to change the xt1063 latinamerican stock ROM (Claro AR) to the xt1063 global one (via fastboot and the bootloader must be unlocked) then i just update it with the OTA update file (via stock recovery).. after that my moto g (xt1063) was running lollipop fine but with the no signal problem.. so i flashed via fastboot two files: NON-HLOS.bin and fsg.mbn from stock latinamerican stock ROM (4.4.4).. and *tadaaaa*.. it worked..
Click to expand...
Click to collapse
worked thanks a lot, u rock !! <3
nikokapo said:
Hey guys, I'm trying to push Android 5.0 to the Moto G 2014 in order to make a video for my channel (SupraPixel). I've got an XT1063 from Latin America (not bought on Amazon). Here's all the build info, etc.:
i. imgur(dot)com/sQjKe8M.png (had to edit it since I can't post links yet)
I've tried flashing XT1064 software, tried getting the OTA even from the retail.US ROM (both glb and aws) and other methods (adb, sdcard) to no avail. Naturally, I lost the radio capabilities so I had to switch back to a CID 12 ROM.
Has no XT1063 (not Amazon) user received 5.0 yet or am I doing something wrong?
Yes, I have read and tried basically every ROM found on the Moto G 2014 forums.
Thanks in advance.
Click to expand...
Click to collapse
Hola, yo tengo un xt1063 latam (comprado en Chile, en la compañía Claro) y también busque varios métodos para tener Lollipop, y lo que me sirvió finalmente fue abrir el bootloader, flashear la rom de USA RETUGLB_XT1063_4.4.4_KXB21.85-17_cid9_CFC.xml para luego aplicar la ota Blur_Version.21.11.17.titan_retuglb.retuglb.en.US. Ya una vez corriendo Lollipop y justamente sin señal móvil, le procedí a flashear los archivos: fsg.mbn, NON-HLOS y el recovery, desde la rom latinoamericana con la que venia originalmente RETLA_XT1063_4.4.4_KXB21.85-24_cid12_CFC_SVC.xml
Después de esto pude disfrutar de android 5.0 sin perder la red, espero te sirva
Saludos.
xxsilentazasinxx said:
worked thanks a lot, u rock !! <3
Click to expand...
Click to collapse
nice to read that! :good:
Raykusu said:
Hola, yo tengo un xt1063 latam (comprado en Chile, en la compañía Claro) y también busque varios métodos para tener Lollipop, y lo que me sirvió finalmente fue abrir el bootloader, flashear la rom de USA RETUGLB_XT1063_4.4.4_KXB21.85-17_cid9_CFC.xml para luego aplicar la ota Blur_Version.21.11.17.titan_retuglb.retuglb.en.US. Ya una vez corriendo Lollipop y justamente sin señal móvil, le procedí a flashear los archivos: fsg.mbn, NON-HLOS y el recovery, desde la rom latinoamericana con la que venia originalmente RETLA_XT1063_4.4.4_KXB21.85-24_cid12_CFC_SVC.xml
Después de esto pude disfrutar de android 5.0 sin perder la red, espero te sirva
Saludos.
Click to expand...
Click to collapse
Worked! Thanks. However, I had to flash the following (erasing old modem):
mfastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
-------
Will update OP.
ENGLISH: i installed stock 5.1 brazil in my Moto X XT1058, after starting are a new update (not the camera) said it was of stagefright and i clicked install, when it was installing my phone shutdown and no start more .
My PC does not recognize in any way my Moto X, does not sound, and no recharges the list in "device administrator" .
The only thing you notice is that after leaving for a while loading my Moto X was heated slightly
Name of stock rom zip: XT1058_GHOST_RETBR_5.1_LPA23.12-15_cid12_CFC.xml.zip
Spanish: Flashee mi Moto X 1gen a 5.1 brasil, luego de iniciar todo me salto una actualizacion (no es de la camara) decia que era de stagefright y le di aceptar, cuando se estaba instalando llego a la mitad, se apago y ya no enciendo mas.
Mi PC no reconoce de ningun modo mi Moto X, no suena ni se recarga la lista de dispositivos.
Lo unico que note es que luego de dejar cargando por un buen rato mi Moto X se calento un poco.. ayuda plz
Sorry for my bad english..
Hi, you have indicated that your device does not show up whatsoever in device administrator. While I can understand that this is worrying, you probably just need to set up the QHUSB drivers. It does not sound like you messed up as bad as I did. As long as you haven't flashed a bootloader or partition table that is incompatible you should be safe to do perform a blank flash then reflash your device with the stock firmware.
This should at least get you back into your bootloader so that you can flash your stock firmware.
This might be a bit simpler to follow, but it is the less effective method (some people do still report success with it).
This will have your stock firmware. Do try to flash the right version. RSDLite can simplify the matter, but the commands are pretty universally used in fastboot.
Good luck!
Hello
I wanted to update twrp before changing my ROM because I don't like the one I am using right now and I wanted to make sure everything went OK
So I flashed the new twrp version using twrp and now when I try to enter to the recovery mode it says: Failed to validate recovery image
What should I do? My ROM isn't rooted (Aosp extended)
Sorry forma grammar mistakes, my first language is spanish
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Hola
Quería actualizar twrp antes de cambiar mi rom porque no me gusta la que tenía y quería asegurarme de que todo fuera OK.
Así que flashee la nueva versión the twrp usando twrp y ahora cuando quiero entrar al modo recovery me aparece: failed to validate recovery image
¿Que debería hacer? My ROM no esta rooteada (aosp extended)
Xt064
Fixed it
I flashed twrp like the first time.
Hello everybody !
As I would like to use an Adblocker and install Macrodroid as root user as well..........I'm just thinking to unlock my bootloader to install TWRP and Magisk.
However....I'm wondering if I will still be able to receive the OTA after that....?
OTA of the stable Global Rom or from the beta channel....as well..
I'm not sure of what rom I will use...because the PIE Global stable Rom is available ......I guess .:victory:
Thank you in advance for yours answers.
@+
Currently, no.
You'd need a custom recovery with muiui ota survival features like redwolf orangefox recover.
Twrp doesn't support ota
I have TWRP, Magisk and I am receiving OTAs (although I install it from TWRP because I want to keep Magisk)
It's not available. Hence me saying "currently, no"
But like Bortex said you can always just manually flash new Rom updates
That's it. Your are going to receive the OTA as long as you use an official Xiaomi ROM. If you are using Magisk, I recommend you to download the OTA but install it using TWRP instead of the Xiaomi updater.
Thanks you all for your replies.....
I think that I will unlock next week........Because I no longer support this flood of crappy ads...
?
If TWRP is not supported for the update you will have to use the original recovery, it is inside the download of the ROM in fastboot format and change it to support the update, some problems that you can find as the ARB and TWRP / Recovery that may you have to jump somehow, you have to re-download the complete ROM so you can finish the update, I happened with the redmi note 5, just tired as it was always a restart, another option is that you look a .eu since these are updated by TWRP, the original recovery is in the images folder, in fact they are all of the phone, within the download in .tgz format, the replacement of the recovery will have to do with fastboot commands and CMD (assuming you use windows) or Terminal, you need the unlocked bootloader for this.
----------------------
Lo pongo en expañol también ya que tengo que utilizar un traductor automático, mi inglés es muy básico.
Si TWRP no admite la actualización tendrás que usar la recovery original, está dentro de la descarga de la ROM en formato fastboot y cambiarla para que admita la actualización, algunos problemas que te puedas encontrar pues el ARB y TWRP/Recovery que puede que te lo tengas que saltar de alguna manera, que tengas que volver a descargar la ROM completa para que pueda terminar con la actualización, me pasaba con el redmi note 5, acaba cansando ya que era siempre un volver a empezar, otra opción es que busques una .eu ya que estas sí actualizan por TWRP, la recovery original la tienes en la carpeta images, de hecho están todas las del teléfono, dentro de la descarga en formato .tgz, la sustitución de la recovery la tendrás que hacer mediante comandos fastboot y CMD (suponiendo que emplees windows) o Terminal, necesitas el bootloader desbloqueado para esto.
hey thankx in advance
i rooted my moto e4 plus bootloader is unblocked install the twrp too but internal memory showing 0 try all repair and change drive format nothing happened then i search a new twrp version while while erasing old twrp bootloader stuck once i reboot it it stuck and coming with moto logo and below wriiten device unlocked and rebooting again and again cant switched off cant go to bootloader menu just installed the battery then its switched off again same issue while attching battery again
thankx if some have solution
Hello,
To install TWRP, you need an SD card or Pen Drive (OTG), because The TWRP doesn't recognize Moto E4 Plus Internal Storage. Then flash this file to fix boot:
no-verity-opt-encrypt-5.1.zip
drive.google.com
reflash stock rom and do root don't click on install superSU when root finish just click on restart..
Saludos lo que puedes hacer es instalar la ultima room oficial de tu motorola aqui en este link puedes descargar el instalador https://support.lenovo.com/mo/es/downloads/ds101291
yo hace tiempo quise colocar una room no oficial y no me funciono asi que me quede con un parche de seguridad antiguo que instale manualmente pero con el instalador que te comparti pude actualizar y recuperar el software oficial