My g1 isnt working with win 7.. I connected it but windows doesnt seems recognizing it...i installed android SDK manager, usb drivers from it but nothing happening....
any suggestion???
What isn't working? Are you trying to access sd card or ADB into the phone?
SD card: make sure to enable USB drive mode on you phone.
ADB: Set-up your SDK per numerous guides here on XDA or elsewhere. Download PDAnet to your computer, it will install required drivers (seems to be the best way around it). Make sure to enable USB degugging under development settings on your phone.
Good luck.
yup im tryin to access memory card but win 7 doesnt seem to recognize my fone, nothing happen when i connect my fone through USB...
n ya i enabled USB debugging but it dint work either...\and there is no Mount Option showing in fone either....
So there's nothing in the notifications saying "USB connected, Select to copy files to/from your computer?" Sounds like a bad cable/port/card to be honest.
I recently upgraded to W7 and it detected my phone and installed drivers automatically.
Am I the only who having trouble in connecting the MTP of Razr I on Ubuntu? I've already installed both libmtp9 and mtp-tools but my computer doesn't detect the phone.
ReeSilva said:
Am I the only who having trouble in connecting the MTP of Razr I on Ubuntu? I've already installed both libmtp9 and mtp-tools but my computer doesn't detect the phone.
Click to expand...
Click to collapse
Same problem here...
Have you tried using AirDroid? I also want to check its compatibility with the Intel chip.
Mr-XXX said:
Have you tried using AirDroid? I also want to check its compatibility with the Intel chip.
Click to expand...
Click to collapse
Yes, it's working well.
Yes I had trouble too, which is odd for an android device. They usually place nice with penguins
There are tutorials to manually mount via MTP but I could get this only to mount and show the folders, but unable to transfer/view files.
The gmtp package works nicely for transferring images etc but it had a hissy fit when I tried to transfer my music folder across...
In the end I just gave up and installed OSX
I have this strange problem:
when I connect my Samsung Galaxy S Advance to my PC, the phone is recognized and I can start downloading my pictures, but, after a while, the download is interrupted and phone is not recognized any more...
Symptoms:
- Phone detected at first time is not detected any more after a while.
- After detection failure, if I try to browse my phone content, either in phone or SD card memory, Windows Explorer freezes.
Tried solutions:
- I've tried disabling and enabling all Developer Options on my phone, but the problem persists.
- Also, I've noticed that, while my phone is connected and recognized by Windows, the command
Code:
adb devices
returns an empty list of devices.
These are my system characteristics:
Phone specs
- Model code: GT-I9070
- Android Version: 4.1.2 (Jelly Bean)
- Baseband: I9070XXLQE (Germany)
- Kernel: 3.0.31-1122398 [email protected] #2 SMP PREEMPT Tue Apr 9 14:55:54 KST 2013
- Version build: JZO54K.I9070XXLQE
- Root: NO
- SD Card: 8GB working and recognized
PC specs
- OS: Windows 7 64-bit
- Installed Software: Samsung Kies, SDK
What can I do?
Thank you very much!
Try reinstall the Kies driver...
Sent from my GT-I9070 using xda premium
i'm not an expert but i would try disabling samsung kies, reinstalling samsung drivers, then plugging cable in different usb port, also could be faulty cable, dirty connectors @ phone, firewall... :fingers-crossed:
edit: razvan wrote @ same time
I have the same problem, the connection is lost when you turn off the screen.
Now I can't even connect the phone to the PC, it is not recognized...
See this thread...
Help please.
If you have wi-fi use samba filesharing.
The problem is with your usb cable-usb port-windows
Control panel -device manager -print screen with universal serial bus controllers
Tarola said:
If you have wi-fi use samba filesharing.
The problem is with your usb cable-usb port-windows
Control panel -device manager -print screen with universal serial bus controllers
Click to expand...
Click to collapse
Unfortunately I don't have Wi-Fi.
Yes, the problem must be with my USB cable, port or Windows.
I attach the screen-shots of the device manager.
ZioAlfredo said:
Unfortunately I don't have Wi-Fi.
Yes, the problem must be with my USB cable, port or Windows.
I attach the screen-shots of the device manager.
Click to expand...
Click to collapse
Tried to turn on usb debugging?
And on some other PC? Is it the same?
shut_down said:
Tried to turn on usb debugging?
And on some other PC? Is it the same?
Click to expand...
Click to collapse
Yes, I've tried to turn on USB debugging but this PC doesn't even recognize the device... I've tried to install drivers from the device manager, without success.
On other PCs I have no problems.
ZioAlfredo said:
Yes, I've tried to turn on USB debugging but this PC doesn't even recognize the device... I've tried to install drivers from the device manager, without success.
On other PCs I have no problems.
Click to expand...
Click to collapse
Then some PC problem. If you have time and nerves - reinstall Windows on that PC. But first try other USB port or something. Rescan with antivirus...
shut_down said:
Them some PC problem. If you have time and nerves - reinstall Windows on that PC. But first try other USB port or something. Rescan with antivirus...
Click to expand...
Click to collapse
Unfortunately, reinstalling Windows on this PC is not an option.
I've tried to change USB port and the automatic driver installation gave the attached result: a partial error... still no recognition as MTP USB device
I cannot see the phone content in Windows Explorer... I don't know what I can do with the successfully installed device "SAMSUNG Android ADB Interface"...
I attach some more screen-shots of the connected and partially recognized Android device properties...
It seems that the modem function of the phone has been recognized by Windows, but I just need the USB storage feature!
ZioAlfredo said:
I attach some more screen-shots of the connected and partially recognized Android device properties...
It seems that the modem function of the phone has been recognized by Windows, but I just need the USB storage feature!
Click to expand...
Click to collapse
I see there is adb driver. Try with this: http://forum.xda-developers.com/showthread.php?t=2105707
shut_down said:
I see there is adb driver. Try with this: http://forum.xda-developers.com/showthread.php?t=2105707
Click to expand...
Click to collapse
Thank you, it worked for few seconds, then it did not find the device any more...
Thank You for your reply in that other topic. Now to this matter.
1. What option did you choose under lock screen? Swipe or None?
2. Even I have faced the problem and the solution i found was simple. This happens when our phone goes into deep sleep and to bring the files back you just need to unlock the phone. Just press the unlock or homescreen button and windows will start recognising the phone again.
Parameswaran Iyer said:
Thank You for your reply in that other topic. Now to this matter.
1. What option did you choose under lock screen? Swipe or None?
2. Even I have faced the problem and the solution i found was simple. This happens when our phone goes into deep sleep and to bring the files back you just need to unlock the phone. Just press the unlock or homescreen button and windows will start recognising the phone again.
Click to expand...
Click to collapse
Hi,
1. None.
2. The screen is always on, Windows loses the connection without apparent reason in the first minute or so of connection. Now is even worse, I've just connected the device and I can't explore the phone folders because Windows just stopped recognizing the phone...
This is what I see in Windows Explorer after connecting the phone: Windows seems to lose connection to it, failing to find files and folders...
unmount your card and try again
Tarola said:
unmount your card and try again
Click to expand...
Click to collapse
This is good and works for re-establishing the connection when it is lost.
I'll tell you if this is the final solution or if the problem keeps showing up after a while.
ZioAlfredo said:
This is good and works for re-establishing the connection when it is lost.
I'll tell you if this is the final solution or if the problem keeps showing up after a while.
Click to expand...
Click to collapse
Did you scan your pc for a virus? If it works on other PC, then obviously it is a problem with the one you use.
Sent from my GT-I9070 using Tapatalk
My ADB is not working... So basically I messed up my HTC ONE by formatting the whole device including system... I'm not sure what to do now. My ADB isn't working. Ive updated the ADB drivers, and updated SDK for Google. My device is not detected by my computer. When i'm in fastboot mode my phone is detected. Is there any other way of pushing a file to my device?
exactly where im at, my windows 8 cant detect but my windows 7 can detect once i move the thing down to fastboot. Shows "Android 1.0"
sasaphrazz said:
exactly where im at, my windows 8 cant detect but my windows 7 can detect once i move the thing down to fastboot. Shows "Android 1.0"
Click to expand...
Click to collapse
I dunno cause I'm on Windows 8.1... I was on Windows 7 but upgraded due to a feature for my gfx card being limited on Windows 7... Havent got ADB working on my Mac either.
PeterZhao478 said:
I dunno cause I'm on Windows 8.1... I was on Windows 7 but upgraded due to a feature for my gfx card being limited on Windows 7... Havent got ADB working on my Mac either.
Click to expand...
Click to collapse
try this, im currently sideloading a rom on my phone right now: http://forum.xda-developers.com/showthread.php?t=2139767
I have been facing a strange problem since I updated my Nexus 6 to Android Marshmallow. When ever I am plugging the phone to my computer (Running Windows 7) using the usb cable, I am not being able to tranfer any files. Its showing a message which says that "The device has either stopped responding or has been disconnected". Any help on this will be really appreciated
adb driver already installed?
h20ray said:
adb driver already installed?
Click to expand...
Click to collapse
Yes. It shows that all drivers are installed correctly....In fact, the device also shows under device manager. Its just that no tranfer is possible between the phone and the computer
did you bring down notifications and change connection type to MTP?
In Marshmallow your connection to PC is in Charging Mode by default, you should bring down notifications select connection mode and change connection type to MTP(Media Transfer Protocol).
aliesz said:
In Marshmallow your connection to PC is in Charging Mode by default, you should bring down notifications select connection mode and change connection type to MTP(Media Transfer Protocol).
Click to expand...
Click to collapse
Thanks ......That helped