This is mirrored OTA files for Indonesian android one device (sprout_b), as I'm not the one who capture it.
Download:
http://goo.gl/iDgIIl
Download according to your phone
The one with noverify is universal, and to be installed with custom recovery
Instruction
Place update.zip in your sdcard
Reboot device to recovery mode
Install update.zip
And you're done
Notes
If you modified your system, it will likely to fail when updating.
Update: Direct links to Google Update Server
Evercoss
Mito
Nexian
What's change from LBY29G to LMY47O? as the update.zip file only about 24mb
cikenkari said:
What's change from LBY29G to LMY47O? as the update.zip file only about 24mb
Click to expand...
Click to collapse
Users reporting that:
Touchscreen is now capable up to 10 points instead of 4 points in LBY29G
Some phone with buggy adaptive brightness is also reported to be fixed
Rear camera's flash is now usable (before it producing over bright images)
There's no announcement or official changelog.
[emoji4]
Can you upload the stock rom too? The stock rom that's very very stock from the phone not the modded one.
Sent from my Mi438S using XDA Free mobile app
I have internet connection problem after update, it show H on signal status, but if I open browser (stock browser, firefox, opera) it can't connected to internet. How about yours?
aaaaaaziskurnia said:
Can you upload the stock rom too? The stock rom that's very very stock from the phone not the modded one.
Sent from my Mi438S using XDA Free mobile app
Click to expand...
Click to collapse
sure, done that. Here's the TWRP backup taken from the phone even before it's booting, with the data and oem partition (IMEI information is taken out, it will generate one based on your phone real IMEI):
Code:
https://plus.google.com/u/0/+AbdulAzizAmar/posts/ZUobp4sP8xX
udots said:
I have internet connection problem after update, it show H on signal status, but if I open browser (stock browser, firefox, opera) it can't connected to internet. How about yours?
Click to expand...
Click to collapse
Check your APN config and your local network status, I'm using telkomsel on mine, and it's fine.
awaaas said:
Check your APN config and your local network status, I'm using telkomsel on mine, and it's fine.
Click to expand...
Click to collapse
I have already checked APN setting on my phone, there is no problem with it, I'll try to downgrade and re-upgrade, hope it will solve the problem.
awaaas said:
Update: Direct links to Google Update Server
Evercoss (N/A at the moment)
Mito
Nexian
Click to expand...
Click to collapse
How do you get direct link?:good: teach us please
cikenkari said:
How do you get direct link?:good: teach us please
Click to expand...
Click to collapse
Sure, here it is.
awaaas said:
sure, done that. Here's the TWRP backup taken from the phone even before it's booting, with the data and oem partition (IMEI information is taken out, it will generate one based on your phone real IMEI):
Code:
https://plus.google.com/u/0/+AbdulAzizAmar/posts/ZUobp4sP8xX
Check your APN config and your local network status, I'm using telkomsel on mine, and it's fine.
Click to expand...
Click to collapse
@awaaas, could upload for the Philz (CWM) version? thanks Gan
---------- Post added at 04:57 AM ---------- Previous post was at 04:28 AM ----------
cikenkari said:
@awaaas, could upload for the Philz (CWM) version? thanks Gan
Click to expand...
Click to collapse
duh, i quess i'm become spoiled and bit lazy.
I don't need CWM version, TWRP is good enough to restore my soft brick.
Step 1. Download TWRP backup, copy to sdcard, link https://plus.google.com/u/0/+AbdulAzizAmar/posts/ZUobp4sP8xX
Step 2. Download TWRP img, link https://plus.google.com/u/0/+AbdulAzizAmar/posts/ZCTzeJpfKex
Step 3. Press Up+Power, Fastboot
Step 4. in CMD, type "fastboot flash boot xxx.img", then type "fastboot reboot"
Step 5. in TWRP mode, restore...
Step 6. hit Thanks on OP post
is this LBY29G in my phoneUNO how to restore back to LYM47o... pls help me
Related
Hello to you guys,
with this thread I wanna help people who get a Live Demo Unit of Galaxy S5 and wanna "unlock" it, removing Retail Mode and getting an official firmware on it. A Live Demo Unit is recognizable cause the phone has an "X" after the "SM-G900" signature.
Before start explain, I wanna remember to all that with a Live Demo Unit YOU CAN'T DO PHONE CALLS or TEXT MESSAGING due to its nature. So, this custom friwmare will transform your Live Demo Unit in a beautiful and complete Galaxy S5 "WiFi Version" .
Ok, lets do this!
What you need for a great job is:
Samsung USB Drivers on your PC
Odin, downloadable from here http://odindownload.com/ (vers. 3.09)
TWRP Recovery, .tar extension (here is the link for the download http://techerrata.com/browse/twrp2/klte)
Firwmare of your country. You can get it form sammobile.com. I've done this with the G900F version and I've tested only with it but I think this kind of guide works for all devices. Be sure to download the correct Firmware of your device!!
A program named "cgywin" for create your own firmware for the Live Demo Unit http://cygwin.com/setup.exe
Do this AT YOUR OWN RISK!! If you're not sure to have understand something, please do not go any further.
Ok, so let's start to explain what to do. If you'll follow step by step this procedure, you'll reach the goal for sure
First, I think is better to do a good and complete backup of your actual firmware and system. To do that follow those steps:
Install Samsung USB driver in your PC (if you don't have it already). Be sure that the phone is visible by your PC.
Turn off the device and go into Download mode (pressing VolDown+Home+Power).
Open Odin and connect your device to the PC.
Now flash the TWRP Recovery (select "AP" voice on Odin and choose TWRP .tar file you have already downloaded)
Ok, now you can do a Nandroid backup of your entire phone, including system, with Recovery. So, turn off the device and go into Recovery, then choose "Backup" and flag ALL the voices (so you'll be sure to backup all). Save it in external MicroSD so you can get it simply if you need it.
After the complete backup, it's time to "prepare" the custom firmware:
Install cgywin (for a complete guide for How To Install this program, Google it)
Download the right firmware for your device
Once file is downloaded you will have something looking like this G900FXXU1ANCE_G900FITV1ANC7_ITV (this is the one I've used)
Extract the .zip file to get an .md5
Rename it with like ldu900x.tar
Go into the folder were you've install cgywin and put the ldu900x.tar here
Now, launch cgywin.exe and type those command
$ tar --delete --file=ldu900x.tar NON-HLOS.bin
$ tar --delete --file=ldu900x.tar modem.bin
After that, the ldu900x should have only those files on it:
- boot.img
- cache.img.ext4
- hidden.img.ext4
- recovery.img
- system.img.ext4
If there are other files that are not those I've checked above, please delete them using the command $ tar --delete --file=samrom.tar FileName on cgywin as explained. The final .tar file gotta have only those 5 files I've listed above.
Once the final ldu900x.tar is ready, you can flash it with Odin.
Before the flash, use TWRP for a TOTAL WIPE of the device (including system but do not wipe the extSDcard). This is for to be sure that the device will be ready for a good and clear flash.
After the flash with Odin, reflash the TWRP Recovery (following the steps above) so you can do other backup or restore the old firmware if you need it.
Hope this guide can help all the guys who need to use their LDU completely (excluding calls and SMS as said). Personally my LDU doesn't have Private Mode, Finger Scanner, S-Health, UltraPowerSavingMode and other stuff, but with this "custom" firmware made by myself, now works ALL! :victory:
Bugs: The only thing that does not work here is the upgrading of SHealth Services that does not allow to upgrade it to SHealth 3.1 version. If anyone know how to solve this I appreciate
Thank you guys for your support and thanks to:
@Dees_Troy for TWRP
@Sirus2012 for have opened the way
@jopa7 for suggestions
Fell free to offer me a beer (or a meat can for my 5 cats )
Have a good flash to all!
Reserved
Cool might be helpful
Sent from my SM-G900H using XDA Premium 4 mobile app
Got pumped when I saw rom.... Been waiting for aosp Lol...
Sent from my SM-G900F using Tapatalk
bjc112 said:
Got pumped when I saw rom.... Been waiting for aosp Lol...
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Same here... But might be helpful anyway [emoji106]
Great work , pm you to send you a beer! You could upload the tar to somewhere and put here the link.
Cheers
Sent from my HTC One max using xda app-developers app
Thank you guys! Sorry for give you an illusion of a SUPERPOWERFUL ROM @jopa7 I'm uploading it on my Dropbox. If you give me your email I can share it to you!
iorya984 said:
Thank you guys! Sorry for give you an illusion of a SUPERPOWERFUL ROM @jopa7 I'm uploading it on my Dropbox. If you give me your email I can share it to you!
Click to expand...
Click to collapse
You can install a superpower rom, mate. Install omega with omega kernel after root with chain CF auto root and install TRWP. Install latest omega zip via trwp chosing omega kernel too. You will get 37000 antutu score or more . By the way, GPS signal works
jopa7 said:
You can install a superpower rom, mate. Install omega with omega kernel after root with chain CF auto root and install TRWP. Install latest omega zip via trwp chosing omega kernel too. You will get 37000 antutu score or more . By the way, GPS signal works
Click to expand...
Click to collapse
Jopa7 are you talking about to flash Omega Rom on LDU? Did you do that?
iorya984 said:
Jopa7 are you talking about to flash Omega Rom on LDU? Did you do that?
Click to expand...
Click to collapse
works like charm!
Have you flashed the entire ROM, also with modem.bin?
iorya984 said:
Have a good flash to all!
Click to expand...
Click to collapse
Thanks a lot for instructions ...
it works
Question
hello to everybody, i have a question, i have an s5 ldu and when i enter those commands in cygwin says that those files doesnt exist in the archive but that's not true, some help? TY:silly:
gzincu said:
hello to everybody, i have a question, i have an s5 ldu and when i enter those commands in cygwin says that those files doesnt exist in the archive but that's not true, some help? TY:silly:
Click to expand...
Click to collapse
I was having same problem and then I downloaded Ubuntu live cd to delete those files
You will have to use terminal for that
Or you can pm author of this thread for precompiled version
help
He doesn't seem to be active on this forum, i would be very happy if you cand send to me the precompiled archive. Thanks alot!
gzincu said:
He doesn't seem to be active on this forum, i would be very happy if you cand send to me the precompiled archive. Thanks alot!
Click to expand...
Click to collapse
Send me your dropbox id through pm
Pre-Compiled version by iorya984
Pre-Compiled version by iorya984
Download Links:-
http://ul.to/dwe11uck
http://ul.to/uvu2vbt0
All Credit goes to iorya984
Proper Tutorial
jopa7 said:
You can install a superpower rom, mate. Install omega with omega kernel after root with chain CF auto root and install TRWP. Install latest omega zip via trwp chosing omega kernel too. You will get 37000 antutu score or more . By the way, GPS signal works
Click to expand...
Click to collapse
Hi all and thank you for this great tutorial. How did you manage to get the gps to work? It shows it's searching for gps signal but never gets it... did you flash a certain modem file?
Anyone get S health to work??
Thank all!!!
aaa82 said:
Anyone get S health to work??
Click to expand...
Click to collapse
same question from me
hello
thankyou for the precompiled files, i am a boot, i dont know what to do exactly, where i have to add the ldu900x.tar in odin? BL, AP,CP or CSC?
**You can begin the following process from any Build but you must already have Root Access**
**Required** [root] FlashFire
Download:
- G930T_PG1_Stock_DeOdexed_Debloated_ROM.zip
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app, grant root access, and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Press "Flash Zip or OTA" and locate and select the ROM. Use the default settings under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set "Reboot" to "Download."
6. Press the lightning bolt then "Ok" to begin the flash . The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition.
7. Once the flash is complete and the device reboots into "Download" mode, flash the G930T_PG1_Stock_Modem_Recovery_Bootloader.tar.md5 using Odin's AP slot. The device will take 10 - 15 mins for the first boot!
8. To regain root access, re-run "root.bat" once the device has fully rebooted. Make certain usb debugging is enabled. Enjoy!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. The above process will update your Modem, Non-hlos, System, Bootloader, and Stock Recovery.
3. The ROM will automatically wipe all User Data!
4. Follow this guide if you do not already have root access: http://forum.xda-developers.com/att-galaxy-s7/how-to/root-s7-att-g930a-g935a-t3410538
Congrats on the first G920T ROM! Any way to do this withOUT wiping user data?
seanvree said:
Congrats on the first G920T ROM! Any way to do this withOUT wiping user data?
Click to expand...
Click to collapse
Thx. Use FlashFire's backup function to backup your data then restore after updating.
Sent from my SM-G930T using XDA-Developers mobile app
Nice! Thanks!
First off thanks for posting the first rom in this section. I just wanted to ask if this runs at the speed of the stock s7 or does it lag and delay like mine is now after rooting and applying the fixes?
veritasaequita said:
First off thanks for posting the first rom in this section. I just wanted to ask if this runs at the speed of the stock s7 or does it lag and delay like mine is now after rooting and applying the fixes?
Click to expand...
Click to collapse
Others will have to share their thoughts on that. I am running pure stock w/out root. But debloated, deodexed ROM'S usually run a little faster than pure stock.
muniz_ri said:
Thx. Use FlashFire's backup function to backup your data then restore after updating.
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
If I use flash fire. What are all the items o want to back up for user data only ? I want to make sure I don't restore anything that will mess with this ROM. Thanks!
Sent from my SM-G930T using XDA Free mobile app
THANK YOU, will try as soon as I charge my phone and I will post updates.
Running amazing, definitely faster then stick rooted, only issue I'm having is when trying to make a call it takes a few seconds to connect :/ tried disabling Volte didn't make a difference
This rom is a phenomenal start. It is atleast as fast as stock s7 and runs circles around a fresh rooted one. As stated above the only thing I did notice was some weird calling issue but what cleared that up for me was dialer/settings/ turn off volte and also turn off wifi calling. The wifi calling had to be tricked into turning off as the regular wifi calling in settings was grayed out but I was able to get it in the dialer section. Thanks for a great start!
Will this unlock bootloader ?
Demonith said:
Will this unlock bootloader ?
Click to expand...
Click to collapse
Don't think so
Demonith said:
Will this unlock bootloader ?
Click to expand...
Click to collapse
Nope. Still not possible with us variants. And prob never will.
Sent from my SM-G930T using XDA Free mobile app
---------- Post added at 10:25 PM ---------- Previous post was at 10:25 PM ----------
Great job on this ROM! Have everything set up and it's blazing fast. Pop your PayPal buddy. I'd like to buy you a beer.
Sent from my SM-G930T using XDA Free mobile app
Hey, I also found this weird problem, may NOT be with this ROM, but I've never seen it before. Whenever I try to change the permissions of any app, I get this error. SO, I have to go thru and disable every app before I can change ANY app's permissions. VERY annoying. Anyone have a workaround?
seanvree said:
Hey, I also found this weird problem, may NOT be with this ROM, but I've never seen it before. Whenever I try to change the permissions of any app, I get this error. SO, I have to go thru and disable every app before I can change ANY app's permissions. VERY annoying. Anyone have a workaround?
Click to expand...
Click to collapse
I could be wrong but im pretty sure that the supersu chainfire released today should fix that for you.
https://download.chainfire.eu/970/SuperSU/SuperSU-v2.76-S7QC.zip
veritasaequita said:
I could be wrong but im pretty sure that the supersu chainfire released today should fix that for you.
https://download.chainfire.eu/970/SuperSU/SuperSU-v2.76-S7QC.zip
Click to expand...
Click to collapse
This one doesn't' work, Make sure to get the latest from here:
https://download.chainfire.eu/969/SuperSU/
F*CK! Don't do this! I just bricked my phone!!!
I used the new UPDATE and flashed via flashfire, it rebooted, now I get the error: "Security error: This phone has been flashed with unauthorized software & is locked"
Anyone know what to do?
seanvree said:
How do we flash this? I put the .zip on my SD card and tried Flashfire but it doesn't see the zip....Weird.
Click to expand...
Click to collapse
I extracted a APK file out of there and just installed it normally. Hope that helps
Just odin flash the stock PG1 .tar files.
You may also want to remove that link to the regular SuperSU.zip. People should only use the special SuperSU version made for use with adb.
veritasaequita said:
I could be wrong but im pretty sure that the supersu chainfire released today should fix that for you.
https://download.chainfire.eu/970/SuperSU/SuperSU-v2.76-S7QC.zip
Click to expand...
Click to collapse
muniz_ri said:
Just odin flash the stock PG1 .tar files.
You may also want to remove that link to the regular SuperSU.zip. People should only use the special SuperSU version made for use with adb.
Click to expand...
Click to collapse
Okay, I've never done this before. what slot am I using in Odin? where do I get the PG1.Tar files?
seanvree said:
Okay, I've never done this before. what slot am I using in Odin? where do I get the PG1.Tar files?
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/database/SM-G930T/
The zip will have all the tar files,, and it will be obvious where they go when unzipped.
I have only tested on T-Mobile and us unlocked so flash at your own risk if u have a different device variant.
It was made for T-Mobile and us unlocked so I'm not sure if it would work on other variants.
Source will be updated in my github https://github.com/TWINNFAMOUS/android_device_htc_ocl/tree/android-7.1
MAJOR THANKS & CREDITS TO @Captain_Throwback @nkk71 for all the help with getting twrp working and decryption.
fastboot flash recovery recovery.img or what ever you name it.
Flashes images and zips and will take full backups.
Also is stock T-Mobile recovery.
I need a stock T-Mobile boot.img and system if anyone decides to send me one it would be appreciated.
Known bugs for twrp 3.2.1-0
Reboot to recovery does not work.
We need kernel source to fix so don't ask unless you know there's kernel source.
Make sure to report back ANY BUGS.
Link to Oreo compatible twrp 3.2.1-0
https://www.androidfilehost.com/?fid=11410963190603878155
Link to Nougat compatible twrp
https://www.androidfilehost.com/?fid=11410963190603878120
Link to stock T-Mobile recovery is broken
If u guys want to thank me make a thread where people can upload there stock imgs boot system and recovery with software numbers and get a little more active it is a HTC phone after all. And please hit the thanks button if I have helped you.
twinnfamous said:
I have only tested on T-Mobile and us unlocked so flash at your own risk if u have a different device variant.
It was made for T-Mobile and us unlocked so I'm not sure if it would work on other variants.
Source is in my github profile
fastboot flash recovery recoverytest.img
Flashes images and zips and will take full backups.
Also is stock T-Mobile recovery.
I need a stock T-Mobile boot.img and system if anyone decides to send me one it would be appreciated.
Make sure to report back
Link to twrp test. https://drive.google.com/file/d/1pRpcZ2E3EjaMliu8Gwga9LJvvyhWQvL9/view?usp=drivesdk
Link to stock T-Mobile recovery. https://drive.google.com/file/d/14uRTanDjkeeGkUwdGoJhgAICSGgfjbLq/view?usp=drivesdk
Click to expand...
Click to collapse
I thought you purchased the stock images from that website?..
dpryor88 said:
I thought you purchased the stock images from that website?..
Click to expand...
Click to collapse
They don't have T-Mobile version I got the stock recovery after I rooted.
twinnfamous said:
They don't have T-Mobile version I got the stock recovery after I rooted.
Click to expand...
Click to collapse
Ohhh
---------- Post added at 08:32 PM ---------- Previous post was at 08:22 PM ----------
twinnfamous said:
They don't have T-Mobile version I got the stock recovery after I rooted.
Click to expand...
Click to collapse
The test TWRP build on here works for me. Can't access SD card/data. Is that still a known issue or did I do something wrong when flashing? It took a few seconds to load TWRP when rebooting to recovery, then it asked for a password, where I just pushed Cancel. Then I swiped to allow modifications. No access to data though.
Thanks for this though dude! It's progress!
dpryor88 said:
Ohhh
---------- Post added at 08:32 PM ---------- Previous post was at 08:22 PM ----------
The test TWRP build on here works for me. Can't access SD card/data. Is that still a known issue or did I do something wrong when flashing? It took a few seconds to load TWRP when rebooting to recovery, then it asked for a password, where I just pushed Cancel. Then I swiped to allow modifications. No access to data though.
Thanks for this though dude! It's progress!
Click to expand...
Click to collapse
It won't unencrypt data. It did for me sometimes but not everytime and when I looked at the log it said my data partition was set to ext4 but said it was Emmc so I tried to change f.stab file and it still wouldn't unencrypt.
So I went to Twrp and in advanced format settings I clicked data partition and chose repair or change filesystem and changed from emmc to ext4 then it worked after it formatted. The only problem is now my secure boot doesn't work and Twrp never asks for a password. I wouldn't recommend doing what I did.
twinnfamous said:
It won't unencrypt data. It did for me sometimes but not everytime and when I looked at the log it said my data partition was set to ext4 but said it was Emmc so I tried to change f.stab file and it still wouldn't unencrypt.
So I went to Twrp and in advanced format settings I clicked data partition and chose repair or change filesystem and changed from emmc to ext4 then it worked after it formatted. The only problem is now my secure boot doesn't work and Twrp never asks for a password. I wouldn't recommend doing what I did.
Click to expand...
Click to collapse
Ok I'll hold off for now till things get worked out a bit.
twinnfamous said:
It won't unencrypt data. It did for me sometimes but not everytime and when I looked at the log it said my data partition was set to ext4 but said it was Emmc so I tried to change f.stab file and it still wouldn't unencrypt.
So I went to Twrp and in advanced format settings I clicked data partition and chose repair or change filesystem and changed from emmc to ext4 then it worked after it formatted. The only problem is now my secure boot doesn't work and Twrp never asks for a password. I wouldn't recommend doing what I did.
Click to expand...
Click to collapse
https://forum.xda-developers.com/z2-force/development/twrp-3-1-1-0-moto-z2-force-nash-t3687421
Check this out. They have twrp but it needs to be formatted first to enable encryption. I guess magisk doesn't do this but SuperSU does? Maybe you'll understand.
Hope this helps.
dpryor88 said:
https://forum.xda-developers.com/z2-force/development/twrp-3-1-1-0-moto-z2-force-nash-t3687421
Check this out. They have twrp but it needs to be formatted first to enable encryption. I guess magisk doesn't do this but SuperSU does? Maybe you'll understand.
Hope this helps.
Click to expand...
Click to collapse
I did the format data already and I use the same supersu that I use on my HTC 10 the only thing I had to do is flash back stock boot.img because su wouldn't patch the magisk one. Now we need some custom roms.
twinnfamous said:
I did the format data already and I use the same supersu that I use on my HTC 10 the only thing I had to do is flash back stock boot.img because su wouldn't patch the magisk one. Now we need some custom roms.
Click to expand...
Click to collapse
So how did you fix in the end?
So you have the stock boot.img after all?
dpryor88 said:
So how did you fix in the end?
So you have the stock boot.img after all?
Click to expand...
Click to collapse
I used the stock is unlocked boot image.
I posted it in the root thread
twinnfamous said:
I used the stock is unlocked boot image.
I posted it in the thread
Click to expand...
Click to collapse
Which thread? I only see stock recovery..
---------- Post added at 08:41 AM ---------- Previous post was at 08:19 AM ----------
twinnfamous said:
I used the stock is unlocked boot image.
I posted it in the root thread
Click to expand...
Click to collapse
I formatted and supersu'd. Now you're right, we need roms haha.
twinnfamous said:
I have only tested on T-Mobile and us unlocked so flash at your own risk if u have a different device variant.
It was made for T-Mobile and us unlocked so I'm not sure if it would work on other variants.
Source is in my github profile
fastboot flash recovery recoverytest.img
Flashes images and zips and will take full backups.
Also is stock T-Mobile recovery.
I need a stock T-Mobile boot.img and system if anyone decides to send me one it would be appreciated.
Make sure to report back
Link to twrp test2
https://drive.google.com/file/d/1Km7axvKZYImX_Qat7kV-iZQTJobvWlcP/view?usp=drivesdk
Link to stock T-Mobile recovery. https://drive.google.com/file/d/14uRTanDjkeeGkUwdGoJhgAICSGgfjbLq/view?usp=drivesdk
Click to expand...
Click to collapse
What's new in the version 2?
dpryor88 said:
What's new in the version 2?
Click to expand...
Click to collapse
hoping decryption works everything else works.
twinnfamous said:
hoping decryption works everything else works.
Click to expand...
Click to collapse
Nice I'll try it in a minute
---------- Post added at 03:46 AM ---------- Previous post was at 03:15 AM ----------
twinnfamous said:
hoping decryption works everything else works.
Click to expand...
Click to collapse
Any clue what the easiest way is to go back to my unformatted data? I formatted so I could see internal... Now I wanna go back if twrp will read internal now
Thanks.
twinnfamous said:
hoping decryption works everything else works.
Click to expand...
Click to collapse
Everything on test2 works for me. But I did already format my data before on the first build, so i can't really be the best review for this. But for me, all is working great. Thanks!
Gonna flash the final version here in a minute. I'll report back
Twrp working great for me...now I'm fully rooted...thanks alot for this✌
Sent from my HTC U11 life using XDA-Developers Legacy app
Lavell11 said:
Twrp working great for me...now I'm fully rooted...thanks alot for this✌
Click to expand...
Click to collapse
Make that two of us. Works great.
Lavell11 said:
Twrp working great for me...now I'm fully rooted...thanks alot for this
Sent from my HTC U11 life using XDA-Developers Legacy app
Click to expand...
Click to collapse
dpryor88 said:
Make that two of us. Works great.
Click to expand...
Click to collapse
I'm happy to now I can sleep tonight
twinnfamous said:
I'm happy to now I can sleep tonight
Click to expand...
Click to collapse
Get some ? bro..?
Sent from my HTC U11 life using XDA-Developers Legacy app
Are there already a root method or do I need to wait a little more?
DKzVeNgEnS said:
Are there already a root method or do I need to wait a little more?
Click to expand...
Click to collapse
up for this
available twrp 3.2.1 & Root
https://romprovider.com/2018/07/sm-a605fn-root-twrp/
mark332 said:
available twrp 3.2.1 & Root
https://romprovider.com/2018/07/sm-a605fn-root-twrp/
Click to expand...
Click to collapse
that method too simple for 2018++ samsung phones, i don't think that will work/proper method.
Doesnt work at all
an-_-dro said:
that method too simple for 2018++ samsung phones, i don't think that will work/proper method.
Click to expand...
Click to collapse
not only that method dont work but also there is this thread
http s://w ww.cyanogenmods.org/forums/topic/twrp-root-galaxy-a6-plus-twrp-and-root-guide/
about flashing twrp for A6plus both threads provide img or tar files to be flashed on the phone and guess what??? when you try to flash them you get the uspport dev_type .
NOTE the serial number on the post is for an A6 phone not an A6 PLus
so my question is, is there an official twrp image that can be flashed on this model ???
ponto2002 said:
not only that method dont work but also there is this thread
http s://w ww.cyanogenmods.org/forums/topic/twrp-root-galaxy-a6-plus-twrp-and-root-guide/
about flashing twrp for A6plus both threads provide img or tar files to be flashed on the phone and guess what??? when you try to flash them you get the uspport dev_type .
NOTE the serial number on the post is for an A6 phone not an A6 PLus
so my question is, is there an official twrp image that can be flashed on this model ???
Click to expand...
Click to collapse
don't trust other site... for me it's better wait for a bit until here in xda or video from youtube. if only article and providing download link that's too dangerous.
can't wait to root,,and unlock the fully potential of this device. especially the batter...superb battery!!! SOT average always above 7 hours ++ with 2 days charging interval
an-_-dro said:
don't trust other site... for me it's better wait for a bit until here in xda or video from youtube. if only article and providing download link that's too dangerous.
can't wait to root,,and unlock the fully potential of this device. especially the batter...superb battery!!! SOT average always above 7 hours ++ with 2 days charging interval
Click to expand...
Click to collapse
well i took the risk and when i tried to flash TWRP i got the message unsport dev_type, just need anyone with the knowledge to compile twrp for this device
Sad
Hey guys !
Any news for A6+ rooting process ?
Thanks !
I have tried everything on my A605FN... nothing works...
SubGenius said:
I have tried everything on my A605FN... nothing works...
Click to expand...
Click to collapse
Please test the recovery image below. Compiled from latest source.
ODIN
https://androidfilehost.com/?fid=962187416754463924
TWRP
https://androidfilehost.com/?fid=11410963190603852329
Device must be OEM_UNLOCKED first. If this device supports RMM then the RMM patch will need to be applied before booting to Android.
.
ashyx said:
Please test the recovery image below. Compiled from latest source.
ODIN
https://androidfilehost.com/?fid=962187416754463924
TWRP
https://androidfilehost.com/?fid=11410963190603852329
.
Click to expand...
Click to collapse
Super, at least adb works on that build. Will try to export recovery.log and go into it.
Please, can you fix the font size in the next build, its tooooo small
nebkas said:
Super, at least adb works on that build. Will try to export recovery.log and go into it.
Please, can you fix the font size in the next build, its tooooo small
Click to expand...
Click to collapse
Can you post screen shots as well as the log?
ashyx said:
Can you post screen shots as well as the log?
Click to expand...
Click to collapse
here is the log
I had to use a macro lens for the screenshot :laugh:
nebkas said:
I had to use a macro lens for the screenshot :laugh:
Click to expand...
Click to collapse
Odd, log reports no issues with resolution. Correctly detected as 1080x2220.
Never seen this small font before.
Are all pages the same, how do the buttons appear?
I looked into ui.xml. its set there:
-<recovery>
-<details>
<resolution height="1200" width="1920"/>
---------- Post added at 00:21 ---------- Previous post was at 00:10 ----------
Picture upload on xda is broken now. will try it later or do you have something where to put them?
nebkas said:
I looked into ui.xml. its set there:
-<recovery>
-<details>
<resolution height="1200" width="1920"/>
---------- Post added at 00:21 ---------- Previous post was at 00:10 ----------
Picture upload on xda is broken now. will try it later or do you have something where to put them?
Click to expand...
Click to collapse
TWRP scales the resolution depending on what it detects from the framebuffer which is why we no longer need to use resolution flags. There are no longer set themes only portrait or landscape.
It seems the resolution has been correctly detected.
You can upload images below:
https://postimages.org
ashyx said:
TWRP scales the resolution depending on what it detects from the framebuffer which is why we no longer need to use resolution flags. There are no longer set themes only portrait or landscape.
It seems the resolution has been correctly detected.
You can upload images below:
https://postimages.org
Click to expand...
Click to collapse
and what is with the not working mount points? I tried to manually mount them, even edited the fstab like from original recovery, but didn't worked, still "invalid argument"
I never build a twrp by myself. But we could open a thred for it and I will support you do find the bugs etc.
nebkas said:
and what is with the not working mount points? I tried to manually mount them, even edited the fstab like from original recovery, but didn't worked, still "invalid argument"
I never build a twrp by myself. But we could open a thred for it and I will support you do find the bugs etc.
Click to expand...
Click to collapse
The UI is really messed up.
The mount issues are because your data partition is encrypted.
Twrp cannot decrypt Samsung encrypted partitions. You need to FORMAT (not wipe) the data partition to be able to mount it.
However unless the fstab is patched it will re-encrypt at boot.
ashyx said:
The UI is really messed up.
The mount issues are because your data partition is encrypted.
Twrp cannot decrypt Samsung encrypted partitions. You need to FORMAT (not wipe) the data partition to be able to mount it.
However unless the fstab is patched it will re-encrypt at boot.
Click to expand...
Click to collapse
Alright, will make a backup of my data partition and try out more.
I downloaded and tried flashing this one but got an error at 5%.
LLD-AL00C00B172 (8.0.0.172),LLD-TL10C00B172 (8.0.0.172),LLD-AL10C00B172 (8.0.0.172)
Can someone tell me which version i correct for me?
Does it match your device model? Also what was the last firmware you had on the device?
Sent from my LLD-L31 using Tapatalk
I don't remember the last firmware but the device is LLD-AL10
I file I tried was the latest I could find on the website. I just tried another file, got the same error.
Your device might be a LLD-AL10 however the last 4 digits is important.
For example you have :-
LLD-AL10C00B172
LLD-AL10C01B171
The C bit is the important bit. Also make sure you download the FullOTA-MF file set.
hacktrix2006 said:
Your device might be a LLD-AL10 however the last 4 digits is important.
For example you have :-
LLD-AL10C00B172
LLD-AL10C01B171
The C bit is the important bit. Also make sure you download the FullOTA-MF file set.
Click to expand...
Click to collapse
Is there a way to check the C part from recovery or somewhere else?
I did download the Full OTA file btw.
Manish54 said:
Is there a way to check the C part from recovery or somewhere else?
I did download the Full OTA file btw.
Click to expand...
Click to collapse
Not sure as my phone hasn't been unlocked or twrp'd. However if its like the LLD-L31C432 then your best bet might be to try LLD-AL10C00B163 as on mine i can't install LLD-L31C432B132 however i was able to install LLD-L31C432B130 or LLD-L31C432B131.
Its worth a shot. Links in code area
Code:
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/update.zip[/url]
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/LLD-AL10_all_cn/update_full_LLD-AL10_all_cn.zip[/url]
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/public/update_data_full_public.zip[/url]
* I TAKE NO RESPONSIBILITY FOR BRICKED DEVICE
hacktrix2006 said:
Not sure as my phone hasn't been unlocked or twrp'd. However if its like the LLD-L31C432 then your best bet might be to try LLD-AL10C00B163 as on mine i can't install LLD-L31C432B132 however i was able to install LLD-L31C432B130 or LLD-L31C432B131.
Its worth a shot. Links in code area
Code:
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/update.zip[/url]
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/LLD-AL10_all_cn/update_full_LLD-AL10_all_cn.zip[/url]
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/public/update_data_full_public.zip[/url]
* I TAKE NO RESPONSIBILITY FOR BRICKED DEVICE
Click to expand...
Click to collapse
which method did you use to flash it?
Search the forum for this phone there be a guide to unblock phone.
Sent from my LLD-L31 using Tapatalk
@Manish54 How did it go, did them links help you resolve your issue?
hacktrix2006 said:
@Manish54 How did it go, did them links help you resolve your issue?
Click to expand...
Click to collapse
Holy ****! this worked with HuR tool. But the only problem is, its a chinese ROM, without play store. If you tell me what those 3 files were, i'll download the Indian version and flash it. Thanks a lot though
From what i understand its the following
1) Format an SDcard and Create a folder called dload in the sdcard.
2) Extract the contents of update.zip to the dload folder.
3) Place the SDCard in the phone.
4) Press and Hold VOL up VOL Down then the power button.
hacktrix2006 said:
From what i understand its the following
1) Format an SDcard and Create a folder called dload in the sdcard.
2) Extract the contents of update.zip to the dload folder.
3) Place the SDCard in the phone.
4) Press and Hold VOL up VOL Down then the power button.
Click to expand...
Click to collapse
This method didn't work. But HuR method worked. And I've flashed a custom rom now. Thanks a lot
Manish54 said:
This method didn't work. But HuR method worked. And I've flashed a custom rom now. Thanks a lot
Click to expand...
Click to collapse
IS Wifi working in this new ROM?
rsverma333 said:
IS Wifi working in this new ROM?
Click to expand...
Click to collapse
Yes flashing stock rom with HuR fixed everything.
Manish54 said:
Yes flashing stock rom with HuR fixed everything.
Click to expand...
Click to collapse
Wow, it worked for me too.
But, how can I install apps with no browser, file manager or play store?
Manish54 said:
This method didn't work. But HuR method worked. And I've flashed a custom rom now. Thanks a lot
Click to expand...
Click to collapse
which custom rom do u flashed & is volte on it ?
rsverma333 said:
Wow, it worked for me too.
But, how can I install apps with no browser, file manager or play store?
Click to expand...
Click to collapse
There is no play store on that Chinese rom, either flash a different stock rom or a custom rom.
VisHnu Raveendran said:
which custom rom do u flashed & is volte on it ?
Click to expand...
Click to collapse
Havoc. And no.
Manish54 said:
Havoc. And no.
Click to expand...
Click to collapse
I flashed that ROM too. But apart from Volte issue, I am not able to access google even after flashing OpenGAPPS. Currently, I am making it work with a VPN but is there a permanent solution?
rsverma333 said:
I flashed that ROM too. But apart from Volte issue, I am not able to access google even after flashing OpenGAPPS. Currently, I am making it work with a VPN but is there a permanent solution?
Click to expand...
Click to collapse
Did you follow the instructions property? Coz it's working for me.