I have been trying to root this phone, and I suddenly find a missing PC Connection Icon, and when connecting to USB, I do not get the Internet Connection option, only Charge, MTP, PTP. Anyone had this problem before?
Related
Having a problem with my Tilt. I've checked the box on the PC side of activesync to allow the device to use its wireless connection while connected, but, the Tilt still refuses to use it. Can't connect to the internet, when connected to USB.
Any help is appreciated.
I had this problem as well. There is a setting on the PC side of ActiveSync to enable/disable this.
Go to File-->Connection Settings. Enable the check box for "Allow wireless connection on device when connected to the desktop"
I have the same problem, both when connected to my home PC, and my work PC. And like the OP, I have checked the box in AS to allow wireless connectiosn on the device.
I thought that that was to allow MMS etc to continue working whilst sync'd as you have passthrough working anyway (ie you can connect to the web via activesync)?
And its not referring to wifi, but cellular wireless.
I have the same problem on a Vodafone branded V1615 - I have "allow wireless connections.." checked in the Activesync settings on the PC, but the phone is unable to connect to the internet either via the USB or by opening a GPRS/3G connection - in fact it flatly refuses to do the latter, and just tells me to check my settings.
I don't honestly know whether I should be able to connect to the internet via the USB or not - I don't know if my work network has blocked that in some way - but I don't see why, in the absence of a working internet connection via Activesync, it doesn't just open up a GPRS/3G connection. Anyone?
Any answers on this? It's driving me nutz!
Hello all.
I have googled, searched xda and tried all to get internet sharing to work, via usb, but fail all the time. It is supposed to just work but does'nt. For me.
Any help please?
regards
settings->connections->connections->advanced-select network
choose my network or whatever the native network profile is called
rather then my isp or whatever your isp profile is called
should mean that when your phone is connected to activesync
or vista's sync tool
it gets the same network as the computer you're connected to
make sure you have synced your x1 with the activesync software that comes with it then try it make sure you got signal aswell cuz it will not connect without. i use vista and it connected fine it just added another network to the ones i could connect to and obvusly it was the phone so i saved it that way when i plug it in it works straight the way. hopefully this helped
just plug it in and start internet sharing on your x1
Probably want to check your PC network status>>properties>>Advanced and check on "Allow other network users to connect...."
And go to X1 settings>connections>usb to pc and clear(if any) check mark on the 'enable adv network' if having problems.
Are you trying to connect your PC to the Internet through your phone or your phone to the internet via your PC?
doesnt necessarily belong here but since people are reading this thread - how can I do the following:
My laptop is connected to landline broadband connection via cable. Now I want to start a wireless network on my computer and let my xperia connect to. When connected to the laptop ... I want the xperia to be able to use the laptops internet access as well be able to access files that I have given network permission to e.g. movies for example.
There has got to be a way of doing this. So far all i can do is create a wireless network and let my xperia connect to it .. however nothing happens after that .. I cannot access files nor the internet on my xperia
so anybody an idea how to do this ?
thanks
I think you might need a Wireless Access Point for this, although I could be wrong. I have personally never tried it, as I haven't played around with peer to peer wireless networks.
I have an Access Point at home connected to the DSL, my laptop and my X1 both connect to it and access the internet, and that works perfectly.
Sorry I am not of much help.
just create an ad hoc connection on your pc it will appear on the network list on the xperia in the properties of the ad hoc connection tick share internet or something similar
Sharing internet connection with x1
Hello guys! I need to connect my X1 via USB with my notebbok, to share the WiFi connection. The problem is that my X1 has an IP with 192.168.1.102 Ip, (From wireless), but when I connect it via USB to my PC its tooks an IP with 162.85.2.2 Ip Address.
I configured it manually, but still wont navigate trouth internet.
So I don't know hoy to configure my connection to have the same IP range with my phone from my PC.
I searched all over XDA forums, but I didn't find anything-
Please somebody can hel me please?
Regards!
Charly!
Active sync issues the IP when connected via the usb cable, leave it as it is. (ie my home wireless network for the laptop / pc / xbox etc is 192.168.0.xxx but the phone when connected to the laptop is 169.254.2.x and active sync does the routing or something). Then do what the others said about allowing the phone ot connect to the internet via active sync and it should work.
net coonectin
hey....i using SE x1i
I need to help for to connect mobile with laptop. No one pc suite are working, when i connect via USB cable i getting error of "your USB not recognize" I tried with various PC suite but nt getting success..My Laptop OS wind8 Plz help me any one....
How can i change USB connection mode for the Note? Everytime I connect the USB cable, Note always connect in MPT mode even with the MHL adapter. Help pleaseeeeeee
usb debugging
go to menu/settings/applications/development on phone then put a checked mark in the box for usb debugging. when you connect to your computer your phone will beep letting you know it has been connected to a usb source. use pull down screen touch the usb connected message and then touch the connect usb storage button. the little green guy turns orange and now your phone will show up on your computer as an extra drive. from here you can just drag and drop files to the phones directory just like a usb pen drive. i believe this is what you where asking about. hope it helps.
note: first time connecting your computer it will probably install a new device driver and also if you are using Kies you need to turn off debugging before Kies can see the phone.
First off, makes sure you install latest version of Samsung Kies, which includes USB driver for the Note.
Also there is setting to connect mass storage mode manually: Settings -> Wireless and network -> USB utilities. But it seems to be the same as just choosing to connect from the notification bar and wants you to disable debugging.
eksasol said:
First off, makes sure you install latest version of Samsung Kies, which includes USB driver for the Note.
Also there is setting to connect mass storage mode manually: Settings -> Wireless and network -> USB utilities. But it seems to be the same as just choosing to connect from the notification bar and wants you to disable debugging.
Click to expand...
Click to collapse
How to connect SGN in Kies Mode?
Whenever i Connect it to PC MTP connection is automatically initiates, My Kies Detects the phone but whenever i try to Upgrade its firmware to 2.3.6, it crashes and says FirmwareUpdate Stopped working ! I have windows 7 64 bit.
katyarevishal said:
How to connect SGN in Kies Mode?
Whenever i Connect it to PC MTP connection is automatically initiates, My Kies Detects the phone but whenever i try to Upgrade its firmware to 2.3.6, it crashes and says FirmwareUpdate Stopped working ! I have windows 7 64 bit.
Click to expand...
Click to collapse
I am facing similar issue, Windows7-32 bit, when connect SGN via USB (MTP) for firmware upgrade but not sure about 'Kies Mode', few other people got firmware upgraded successfully so i think it's something else. see this link http://forum.xda-developers.com/showthread.php?t=1318734&page=59.
In the notifications bar at the top of your screen. You will see a usb symbol in that bar. 3) Use your finger and pull down the bar and then tap the usb symbol. There you will see the option to chang it from MTP mode to any other mode option it has.
I hope this helps.
Ares7425
I've been trying to connect my Z1 to my PC thru wifi instead of USB cable but it's not working. Everytime I try to use PC companion to set up wifi it fails when I get the 'install software' notfication on my phone. The device disconnects. The other half of the time PC Companion just freezes up at the 'connecting' screen. Has anyone had luck being able to connect the two thru wifi?
I have Windows 8
Thanks for any help.
Hi, when i connect my p7 to laptop, it just charges, theres is no any notification in laptop or phone that they are connected (no message "device is not recognise"). Tried to connect to other pc, same issue. USB debugging is on in developer settings. It was working fine couple months ago. Also, when sharing hotspot from my p7, other devices can connect, but there is no internet. Search for solutions in internet, but nothing works. Any idea what's wrong? (p7 not rooted)