Just rooted Droid Turbo yesterday. Now, phone freezes every 10 minutes - Verizon Motorola Droid Turbo Q&A, Help & Troublesh

I just rooted my turbo with Moforoot and it's been O.K. yesterday except the fact that i couldn't install xposed after hours upon hours. I was tired and decided to sleep and my phone fell off my bed and this morning it was dead although the battery was alright. I have a case on my phone and i've dropped it other times. It is also noteworthy saying that today i FELT as if my power button was sort of permanently jammed in my phone - it feels like the power button doesn't come out as much as it should- .
Main concern: my phone has been freezing every so 7-10 minutes after turning it back on, even after deleting and undoing everything that I had done since the day I rooted my droid.
Second Concern: I'm not sure whether my droid's power button normally came with a somewhat deep power button. If anyone can, can you check to see if, when you push in your power button, whether or not the button gets pushed PASSED the phone as in it gets pushed into the phone, unlike the volume buttons. Thanks guys. This problem has made my weekend quite hectic.
It is also worth noting that my phone has had no problems before, so it is fair to conclude that this problem is either due to the rooting, the tampering, or the dropping of the phone.
If anyone would be so generous and would post a video of them pushing their power button, that would be of great help too. Thanks everyone.
-Qarie

Hey - saw your post - I also rooted recently. Separately, was also critical of the right side buttons on a naked XT1254. They are too easily engaged, pocket-pressed or could be "over-pushed" or jarred in a drop.
Buttons: Put your naked phone in a good case that has its own buttons that overlay those on the phone. I use a Tudia hard case. It's bit thick & heavy but the Tudia's buttons take some pressure to push & cannot be pocket-pushed. The case's buttons balance the too-soft touch on phone's buttons nicely. Totally solved over-pushing and no more pocket-pushes.
Root:
I had a couple of crashes post-root too, but tracked it down to a SU conflict between AirPlay and AirAudio BT streaming music or vids from GMusic or DoubleTwist on android>Apple TV>hifi system. Problem solved, gave SU access to AirAudio and took it away from AirPlay and all's right since. Be cautious which apps get SU access and which do not. If your phone crashes, besides a regular restart w/ power button, consider a hard restart pressing screen + both volume buttons at same time. See if the ensuing rooted restart makes the phone behave. It did for me and I've had no probs since. Root freedom has its price! Good luck.
--------------------------------
It is also worth noting that my phone has had no problems before, so it is fair to conclude that this problem is either due to the rooting, the tampering, or the dropping of the phone.
If anyone would be so generous and would post a video of them pushing their power button, that would be of great help too. Thanks everyone.
-Qarie[/QUOTE]

bookman888 said:
Hey - saw your post - I also rooted recently. Separately, was also critical of the right side buttons on a naked XT1254. They are too easily engaged, pocket-pressed or could be "over-pushed" or jarred in a drop.
If your phone crashes, besides a regular restart w/ power button, consider a hard restart pressing screen + both volume buttons at same time.
-Qarie
Click to expand...
Click to collapse
[/QUOTE]
Unfortunately, my power button was "over-pushed" in a drop (putting phone in pocket with gloves on, missed the pocket...oops phone managed to land precisely on the power button) and no longer works. The button is now limp/loose and no longer makes any "clicking" tactile response when pressed. Obviously it does not control the power anymore. I have been afraid to take it into Verizon as there is some clear physical damage near the power button and I am sure I will need to pay to have it warrantied. I wish I would have seen your advice to put it in a case that protected the buttons before it was too late!!
I just wanted to reiterate your point and also ask a follow-up question about your hard restart advice? I have never heard of this method before (pressing screen/both volume buttons). I am a habitual resetter of my devices as I feel like starting with a clean slate always makes them run faster, but unfortunately can't do this anymore unless I let the phone run out of battery completely (which is pretty much impossible with this unit LOL).
Thanks in advance.

I just wanted to reiterate your point and also ask a follow-up question about your hard restart advice? I have never heard of this method before (pressing screen/both volume buttons). I am a habitual resetter of my devices as I feel like starting with a clean slate always makes them run faster, but unfortunately can't do this anymore unless I let the phone run out of battery completely (which is pretty much impossible with this unit LOL).
Thanks in advance.[/QUOTE]
I'm not sure what your question is. I discovered 3 button method of reset and found it worked. Had a few crashes the first days post root but since all's well. Zero crashes in 2 weeks. . Not expert enough to tell you why is works, it just did in my case. If you're apprehensive about verizon repair, find a local phone tech, it shouldn't be that tough or costly to replace a power-on button. Then buy a good case!

bookman888 said:
I'm not sure what your question is. I discovered 3 button method of reset and found it worked. Had a few crashes the first days post root but since all's well. Zero crashes in 2 weeks. . Not expert enough to tell you why is works, it just did in my case. If you're apprehensive about verizon repair, find a local phone tech, it shouldn't be that tough or costly to replace a power-on button. Then buy a good case!
Click to expand...
Click to collapse
I am wondering what exactly this three button method is? I am not rooted so it might not work for me (scared to root with the broken power button! thanks for the advice re: local phone tech, I will look into that), but how does it work? Where do I press on the screen, etc? If you could give me a step by step it could prove very helpful.
Thanks.

jfrostad said:
I am wondering what exactly this three button method is? I am not rooted so it might not work for me (scared to root with the broken power button! thanks for the advice re: local phone tech, I will look into that), but how does it work? Where do I press on the screen, etc? If you could give me a step by step it could prove very helpful.
Thanks.
Click to expand...
Click to collapse
=====================
If your power button is toast, then this is not going to work, but if the power button is functional...
In any screen, just hold down Power + VolUp + VolDown simultaneously for about 3 to 5 seconds or until the phone goes dark.
Then release all 3 buttons and the phone will restart itself in a few seconds with the usual DROID animation screen. No need to press Power-on again.
I'm not a tech but suspect this kind of restart clears a few caches and the phone should run normally on restart, rooted or not. I've done this about 4 or 5 times with no issues. This method will also work if an app "freezes" the phone. It's just another way to restart. Let me know if it works out for u.

bookman888 said:
=====================
If your power button is toast, then this is not going to work, but if the power button is functional...
In any screen, just hold down Power + VolUp + VolDown simultaneously for about 3 to 5 seconds or until the phone goes dark.
Then release all 3 buttons and the phone will restart itself in a few seconds with the usual DROID animation screen. No need to press Power-on again.
I'm not a tech but suspect this kind of restart clears a few caches and the phone should run normally on restart, rooted or not. I've done this about 4 or 5 times with no issues. This method will also work if an app "freezes" the phone. It's just another way to restart. Let me know if it works out for u.
Click to expand...
Click to collapse
Got it. Ya, I guess that won't work for me - I got confused because earlier you said "press screen" so I thought perhaps that might just be the phone screen itself (not the power button). I will look into a local phone tech, this is getting ridiculous!

Workaround . . .
Qarie said:
I just rooted my turbo with Moforoot . . . today i FELT as if my power button was sort of permanently jammed in my phone . . .
Click to expand...
Click to collapse
jfrostad said:
Unfortunately, my power button was "over-pushed" in a drop (putting phone in pocket with gloves on, missed the pocket...oops phone managed to land precisely on the power button) and no longer works. . .
Click to expand...
Click to collapse
Just FYI, I'm using an app+widget called Power Toggles (link below) that offers on-screen tap functions, including power, for rooted devices. The widget bar is customizable, to include adding a button that will give you pretty much all options for restarting your phone: Power off, Reboot, Reboot to Recovery, etc. You have to scroll way down the "Add" list to find the power-related buttons, but there's a "master" button that provides several options on pop-up.
I believe it could serve as a good temporary (or permanent) workaround for a broken power button, as long as the phone is never actually turned off ('cause then you really would need a working power button).
There may be other apps that do some of the same things, but I've been using P.T. for a month or more and I'm extremely happy with it. Here's the app info (browser link):
https://play.google.com/store/apps/details?id=com.painless.pc
( PS: I don't have a Turbo yet, I'm just browsing the forum for info. )

Moondroid said:
Just FYI, I'm using an app+widget called Power Toggles (link below) that offers on-screen tap functions, including power, for rooted devices. The widget bar is customizable, to include adding a button that will give you pretty much all options for restarting your phone: Power off, Reboot, Reboot to Recovery, etc. You have to scroll way down the "Add" list to find the power-related buttons, but there's a "master" button that provides several options on pop-up.
Click to expand...
Click to collapse
Thanks for the helpful and informative post. I already use PowerToggles but am not currently rooted.

No problem. Yeah, I didn't realize it was using root (on my Razr M, at least for the power functions) till I installed it on my unrooted Moto X.

Related

Nexus One Power Button Issue

I have read many threads about the issues that the Nexus One has with the power button. I feel that my situation is a little different, so I wanted some opinions on this. My power button is completely unresponsive. I can't use it to turn the phone on, wake or lock my screen when the phone is on, etc. My phone has an unlocked bootloader and is rooted. I am currently using the track ball to wake my phone, so I'm not having any real issues with day to day operations of my phone. I was completely convinced this was a hardware issue (and still am), but I wanted to be 100% sure it was a hardware issue before contacting HTC. I downloaded Quick Boot from the android market which allows you to reboot your phone, boot your phone into your Bootloader, and boot your phone into Recovery. I decided to boot my phone into Bootloader mode to see if the power button would work there. The power button didn't work in the Bootloader, but neither did the volume button (prior to this test, I had no issues with the volume rocker at all). I pulled the battery and let the phone boot up to check and make sure the volume button was still working when the phone was running. Once the phone was booted up, I had no issues with the volume controls. My question is why would the volume rocker not work in the Bootloader? Also, could the issue that prevents the volume rocker from working in the Bootloader be preventing the power switch from working while the phone is booted up? If there is a chance that it's a software issue, how would I test/correct the issue? Thanks your help.
Most people I have seen complain about that problem, send the phone back for a free repair because it's a hardware problem.
The best way to test it is to flash a stock rom.
Thank you, I will try reflashing the FRF91 stock firmware and see what happens. Thanks.
Definatly sounds like the power button is broken. I had one like that. Send it back for a repair/replacement.
I've checked my immediate suspicion, and it turned out to be correct - so I'm posting the result:
Your power button is actually stuck in "ON" position (pressed).
Anyone can test it, press the power button to wake up the screen, keep it pressed, every operation is allowed in the system and volume buttons work. But when you reboot and try the same in bootloader, having power button ON disables the rest of the buttons.
My screen doesn't wake when I press the power button. Any other ways to check if it's stuck in the "ON" position?
It's 100% determined by your description. The only other check would be running any kind of SW that shows the current key states, and I'm not aware of any such SW.
I've posted the checking procedure for people with working power buttons, so they can verify the findings.
Any way to fix the issue?
If you're technically inclined and can't use warranty, I suppose that getting to the power button and repairing/replacing it wouldn't be very difficult. But no other way I can think of.
has anyone tried to repair this?
NEED a Do-IT-Yourself
Jack_R1 said:
If you're technically inclined and can't use warranty, I suppose that getting to the power button and repairing/replacing it wouldn't be very difficult. But no other way I can think of.
Click to expand...
Click to collapse
defroster said:
has anyone tried to repair this?
Click to expand...
Click to collapse
As much as it freaks me out
Pls assist with a DIY ...
As there's No HTC Service in my area
Thanks in advance
aseems said:
As much as it freaks me out
Pls assist with a DIY ...
As there's No HTC Service in my area
Thanks in advance
Click to expand...
Click to collapse
A DIY can not be too difficult and you may be best to search YouTube. It can not be too terribly difficult as long as you can open it up and remove any connecting ribbons (I've had to replace my girlfriends iPhone digitizer due to phone falling out of back pocket onto concrete from three+ feet up). As long as you can open it, you're fine. Just going to need to re-seat the button. Good luck!
Greetings,
I had the same power button issue. I was able to wake my phone using the usb cable whenever the screen timed out but otherwise the phone worked 100% of the time in all ways. I got an RMA and label and shot the phone to them in an anti-static wrap with 4 inches of bubble wrap on all sides and foam padding on top of that. The phone was in perfect condition. Well to cut to the chase. I got a quote of 196.00 because they said there was water damage!? I treated that phone better than I treat my own body! There was no water damage when I sent it in. So one of their folks send me images of a phone that has a broken screen, water damage in the base usb port and no inscription. Interestingly all of the angles avoided showing the ein or s/n. My phone has a laser etched inscription with my name and a couple of bible verses. So what am I supposed to do here? Pay another 196 for an 800 dollar phone that had nothing wrong but a power switch? I am a T-Mobile customer and an Android developer in good standing. What the heck!? Can anyone give me a suggestion on how to get this squared away? My only other option is to send them $28 to get the phone back with the same power button issue. It's even under warranty until Jan 28th.
aseems said:
As much as it freaks me out
Pls assist with a DIY ...
As there's No HTC Service in my area
Thanks in advance
Click to expand...
Click to collapse
why dont you contact htc of a nearby country and send them the phone? i know it is being done. of course you will have to arrange for the transport but it's still worth a shot imo
Here....
http://forum.xda-developers.com/showthread.php?t=687397&page=3
Does anyone know if htc india supports the nexus one for after sales service

Power button all of the sudden stopped working

So I have a major problem. My power button on my phone stopped working out of nowhere. I went to put my phone on the charger last night, my hand was pressed against the power button, so as normal the Reboot / Recovery / Shutdown menu popped up. After I couldn't get my power button to work at all. When my phone would sleep, I'd have to pull the battery out and put it back in (strangely, my Cappy would turn on by itself once I put the battery in). From there, I figured out how to reprogram the hard keys, so I used root explorer to get into the system folder on my internal SD and I remapped the 'Volume Up' key to work as the power key, so now I have a working power key. The only problem is, is I can't flash anything now.. well, I can, but since I no longer have a Volume Up key, I can't boot into D/L mode or into Recovery if something goes wrong during flashing. My phone also freezes on shutdown when I use the new remap. So I'm not sure what is going on with it. This is really troublesome, I was considering paying the $399 and getting the Galaxy Nexus GSM from Google and putting my SIM card in it, since it works with AT&T, but I really don't want to buy a new phone.
Any help at solving this and getting the normal power button working again would be greatly appreciated. Thanks!
Edit: I am running ICSSGS[RC4.1], if anyone needs to know the ROM. I am using whatever the stock kernel is that comes with it.
Make or buy a Jig (see my sig below for links) and Odin or Heimdall back to a Stock i897 Firmware, KK4 was the latest GB (see Dev Forum One Click Sticky Thread). See if that fixes the problem.
If not, then see here... Samsung Captivate Power Button Repair . This is a reliable and trust worthy company to do this job and more.-- (see here for references, etc. ). The guy who runs this biz is known as connexion2005 on XDA.
I'm sorry this happened to you, it's a bummer when hardware dies.
If you do this I am in no way responsible for your phone.
two options:
#1
follow the teardown guide here
http://forum.xda-developers.com/showthread.php?t=740022
and see if there's any crap messing with the contact for the power button. if there is clean the crap out and re install everything.(my brother fixed his button this way)
#2 if the first way doesn't work
go here and but a new power button module.
http://www.globaldirectparts.com/Samsung-Captivate-i897-Replacement-Repair-Parts-s/6412.htm
or search other sites for a power button
and order yourself a new power button module and re install it.
follow the teardown guide here
http://forum.xda-developers.com/showthread.php?t=740022
and see if you can find out a way to replace your power button.
I've taken my phone apart many times it's pretty easy, just be extremely careful, once again I am in no way responsible for any damage YOU cause.
hope it works! let me know! just be careful, it's really not that hard though.
It is not a good sign when HW faults. In General section there's also a thread on remapping Search button as Power. I'm going to include it in my future ROM - good use for useless Search button.

Samsung Captivate Power Button Not Working . FIXED :)

If your phone's power button is in a 'pressed' state, like mine, (turns on automatically when battery is inserted), it is a hardware issue.
Here is a hassle free alternative to turn on the phone when it is in sleep mode, without relying on the power key!! Takes a minute or two only!!
1. Get 'Go launcher' from the app market (play)
2. Get 'Go Locker'
3. Now Enable Go Locker on your device. And you are done!!
When the screen goes black again, Just press the volume button, The screen wakes up!!
Using this method you don't lose the normal functionality of the volume rocker!!
I recalled that I used to have Go Locker on my phone, and that when I pressed the Volume key the screen turned on!!
At that time I found it a little annoying, But now it has turned out to be such a gift!!
* For this method to work, your phone has to be rooted.
The power button is not going to work until the hardware is repaired, I prefer to use this method, because it is a safe and quick method!!
Believe me I looked around the internet and this forum for a fix, The usual method: editing the system files on the phone, and after which the volume button cannot be used to control the volume.
For those looking for a quick fix, just follow my method!
Cheers!
There are also several roms out there that have the volume rocker wake built into the rom without making it completely useless for it intended purpose. As well as several that offer a go to sleep toggle in the notification window so you can lock your phone again.
so this is a hardware issue ? i had been using the go locker i been using but the power button is annoying cus it keep showing the power button options . and killing my battery.
only fix is samsung?
Pretty much every version of cm for cappy has volume rocker wake as an option, because of this common problem. I use app called turn off screen as well.
Natureboyhcg said:
so this is a hardware issue? only fix is samsung?
Click to expand...
Click to collapse
I had the exact same problem with my Epic Touch 4G. Thought it was the ROM, the overclock, etc. I flashed back to (almost) stock, went back to original clock speeds. I couldn't figure out what it the world was causing the issue, until it got worse. Then, I noticed that even brushing past the power button would wake the screen, and about 10 seconds later the phone would reboot.
Long story short, I bought a replacement power switch, soldered it in place, and have had zero problems since!
Several eBay sellers offer the proper replacement switch you'll need.
(They don't include the required skills to properly desolder/solder it, however. It's a tiny switch - about 4mm x 2mm x 1.5mm, and you'll need a good quality fine-tipped soldering iron.)

[Q] Power button is not locking/turning off screen but works to bring up power menu.

So this morning I picked up my Note 4, used it normally to check emails, etc, went to turn off/lock screen and it wouldn't respond at all. I held down the power button and then it brings up the power menu, I restarted a few times and still nothing. Is my power button defective or could some setting have automatically changed the settings?
Go to *#0*# and select Sub-Key. Press every physical button on the Note 4 one by one (Volume Up, Volume Down, Home Button, Power Button On, Power Button Off). If the end result is PASS, then you're Power button is fine. Can also be a sticky / tacky power button, or something you modded in the settings.
artkrime said:
So this morning I picked up my Note 4, used it normally to check emails, etc, went to turn off/lock screen and it wouldn't respond at all. I held down the power button and then it brings up the power menu, I restarted a few times and still nothing. Is my power button defective or could some setting have automatically changed the settings?
Click to expand...
Click to collapse
arjun90 said:
Go to *#0*# and select Sub-Key. Press every physical button on the Note 4 one by one (Volume Up, Volume Down, Home Button, Power Button On, Power Button Off). If the end result is PASS, then you're Power button is fine. Can also be a sticky / tacky power button, or something you modded in the settings.
Click to expand...
Click to collapse
Just did the test, every button turned a different color, volume up (gray) volume down (green), menu (brown), home (blue) back (purple) , power (red, is this a fail?) but I didnt get any PASS. Is the power button supposed to have 2 colors, one for on and one for off? I tried holding down the power button but that brings up the power menu.
Also noticed that the screen will not dim or turn off automatically.
Update: I ended up doing a reinstall of the stock fw through Odin and it fixed it. I wonder what caused it and where those settings/issue where stored? I had tried doing a reset from within settings, but as I understand, that doesn't clear ALL the data.
I know how it feels when the diagnostic doesn't yield a pass. Glad to hear that reflashing the stock firmware resolved it though. Could have been something deep in the firmware causing this. Keep us updated if it persists again. The power button has been a culprit of problems in the past for many as well in previous Note devices. The final result should have displayed "PASS" on the display, perhaps you didn't complete the task, that's okay. Sometimes simply clearing the cache instead of factory reset could have resolved the problem as well. Samsung is notorious time to time.
artkrime said:
Just did the test, every button turned a different color, volume up (gray) volume down (green), menu (brown), home (blue) back (purple) , power (red, is this a fail?) but I didnt get any PASS. Is the power button supposed to have 2 colors, one for on and one for off? I tried holding down the power button but that brings up the power menu.
Also noticed that the screen will not dim or turn off automatically.
Update: I ended up doing a reinstall of the stock fw through Odin and it fixed it. I wonder what caused it and where those settings/issue where stored? I had tried doing a reset from within settings, but as I understand, that doesn't clear ALL the data.
Click to expand...
Click to collapse
I have a Note 4 too and since a few days I have been noticing this issue. The power button doesn't wake the screen up. I have to fiddle around the button a little bit, press it a bit harder sometimes and then it works.
Also noticed that when this happens, I unlock the phone using the Home button and when I try to use the power button then nothing happens. Keeping the power button pressed doesn't give me the reboot/boot options either until I fiddle with it.
The strange this is, one it starts working, i can use it again and again until I leave the phone aside until sometime and then the power button does nothing until i repeat fiddling it.
---------- Post added at 03:32 PM ---------- Previous post was at 03:31 PM ----------
Also ran the test : *#0*# and select Sub-Key
All buttons work except the power button but again if I press hard and try to nudge the button a little bit, I saw the colour change to RED. No PASS either.
Do you have any xposed modules installed? I had this happen with either gravitybox or wanam when I tried to tinker with the power menus. *3.
No. Everything is stock and not rooted either.
In my case, a complete wipe to factory fixed the issue for me and never had the issue since then, but it kind of sounds like you may have a hardware issue.
that's what I'm thinking too hw issue. But once it starts to work it works perfectly even pressing the button lightly. If the phone's been idle for a while that's when it starts. But anyway, I'll do the basics, factory reset and then bring it over to the carrier shop. Hate to send it away as its not that long ago i got the phone.
Thanks for all the help/comments.
I just started having the same problem myself. I think I'm going good to buy the right now. For the power button and have it installed.
corpuscallosum said:
that's what I'm thinking too hw issue. But once it starts to work it works perfectly even pressing the button lightly. If the phone's been idle for a while that's when it starts. But anyway, I'll do the basics, factory reset and then bring it over to the carrier shop. Hate to send it away as its not that long ago i got the phone.
Thanks for all the help/comments.
Click to expand...
Click to collapse
I am having the exact same problem , did you manage to solve it ?
No. But I've been using the phone less as in on holidays and noticed it hadn't been happening much. If issue still persists I'll bring the phone back to the carrier for a repair/replacement as it's still under warranty.
For the first few days power button worked occasionally now it has stopped working completely.
Sent from my SM-N9100 using xda Forums PRO
kabuk1 said:
Do you have any xposed modules installed? I had this happen with either gravitybox or wanam when I tried to tinker with the power menus. *3.
Click to expand...
Click to collapse
I have had wanam installed but I uninstalled it , also the phone failed the *0# test
Sent from my SM-N9100 using xda Forums PRO
The working of button changes with temperature. With a little heating with hair dryer the button started working.
Sent from my SM-N9100 using xda Forums PRO
I agree with the temperature because when I was in holidays the issue didn't happen and Iwas in a hot country with 35 deg C. Weird, so was my Note 4 built for Middle East?!?
My power button has started working 100% normal from falling the hw test earlier.
Sent from my SM-T320
I did a full factory reset and it appeared to work but after restoring all my apps and using it for a couple of days it started again. Brought it to the carrier to get it fixed as is still under warranty. They said it was a faulty "electrical component" which they replaced. Got the phone back and I restored all the apps. I have the problem again. I don't trust the carrier to have fixed the issue as it was intermitten in the first place. The button works continuously once it's stays working until I leave it aside for a while. I'll have to bring it back again and wait for a week!
I'll keep you posted.
^ blow some hot air with a hair dryer
My note 4 problem is whenever I remove the charger it went out and behave as it wants to start up and as soon as I replaced the charger I can turn it on and it stays on. Someone please help me with this

power button problem

hello friends, today dropped my droid turbo, after that it seems that power button is little bit fell in, so it's harder to press on it, it's no more like volume button (no click effect), but it steel works, so is there some solution to fix it without disassembling whole device? thanks
Niku7a said:
hello friends, today dropped my droid turbo, after that it seems that power button is little bit fell in, so it's harder to press on it, it's no more like volume button (no click effect), but it steel works, so is there some solution to fix it without disassembling whole device? thanks
Click to expand...
Click to collapse
I have a not-quite-so similar issue; I dropped mine a couple of weeks ago, with a Diztronic case on it, and it landed on a brick walkway directly on the power button completely disabling any function whatsoever to the power button. I thought about opening the back of the phone and trying to replace the button with one from a previous busted quark that I still have. But instead, I have gotten by without it by using Lock Screen Widget (free from Google Play, along with other similar apps), which can place a button on the screen, either permanently or on Home screen only, to turn the screen off.
Now, to turn the screen on, Ambient Display has proven to be invaluable, plus in the Button settings of the Bliss (@NepoRood) custom rom I'm using, there is a selection to wake the phone using the volume button and I have it set to wake when it's plugged into a charger / PC. If you're not using Bliss, I'm pretty sure other custom roms have these wake features; if you have unlocked bootloader and root access, the Xposed module Gravity Box may be able to enable this as well. However, if your phone isn't rooted, I'm not sure if this wake feature would be available.
I know this may not directly answer your question, it's just what I've been using to get by. I am curious though if anyone else has had success personally replacing or repairing the power button.
RL_Wells said:
I dropped mine a couple of weeks ago, with a Diztronic case on it, and it landed on a brick walkway directly on the power button completely disabling any function whatsoever to the power button.
Click to expand...
Click to collapse
thanks for reply
so does anyone know i need to buy new button and replace it or need to change whole frame, which holds that power button?
Niku7a said:
thanks for reply
so does anyone know i need to buy new button and replace it or need to change whole frame, which holds that power button?
Click to expand...
Click to collapse
A few months after I got my original Droid Turbo the power button failed. Wouldn't turn it on or off. Physically had a problem. They told me that there is an issue with their power buttons and when it gets like that they have to replace the button.
However, perhaps you do have something as simple as a dented case/cover in the metal by the button which is restricting the button from functioning as normal. If you have something small and thin like an intricate pick tool, you might be able to get down in there a little bit and see if you can go all the way around the button. If it sticks or stops, that might be a dented area.

Categories

Resources