[Q] JTAG Interface on Nexus 6? - Nexus 6 Q&A, Help & Troubleshooting

Hi XDA, I have a bricked Nexus 6 and I would like to repair it by overwriting the flash memory over the JTAG interface. Does anyone know where this is on this device? I think I've found it, but can't confirm (pic attached). Much appreciated.

It is usually not necessary to go to that extreme on a Nexus. What exactly is it doing?

Here's a little more context. The device is actually a Moto X Pro (the N6 equivalent, but sold in China). The bootloader was overwritten and hard bricked the device. To repair it, I was able to restore the device to a flashable state in qhsub_bulk mode using the guide below:
http://forum.xda-developers.com/nexus-6/general/fix-fix-qhusbbulk-cm12-t3059518
However, the problem is that the factory ROM for the Moto X Pro was not released publicly by Motorola and the stock Nexus 6 ROM does not work (that's how it got into this state). It sounds like I have 2 options:
A. Find any third-party ROM for the Moto X Pro. I've been searching but to no avail. If anyone has found one, lmk!
B. Pull the system, boot, recovery partitions from a stock Moto X Pro. The problem here is that I can't sign these files to create the img and I don't think I can re-flash the bootloader. Any recommendations?

@blazer072,
Have you seen this thread? > http://forum.xda-developers.com/nexus-6/help/moto-x-pro-zip-t3078399

And this:
http://motofirmware.center/files/category/2-nexus-6/

@cam30era: Thanks, downloading that ROM now. I'll post here the results.
@Evolution_Freak: Those ROMs are for Shamu/N6, which is the XT1103. The Moto X Pro is the XT1115, the hardware is slightly different.

blazer072 said:
@cam30era: Thanks, downloading that ROM now. I'll post here the results.
@Evolution_Freak: Those ROMs are for Shamu/N6, which is the XT1103. The Moto X Pro is the XT1115, the hardware is slightly different.
Click to expand...
Click to collapse
Sorry about that, good luck with your project!

blazer072 said:
@cam30era: Thanks, downloading that ROM now. I'll post here the results.
@Evolution_Freak: Those ROMs are for Shamu/N6, which is the XT1103. The Moto X Pro is the XT1115, the hardware is slightly different.
Click to expand...
Click to collapse
Yes, interested in hearing how this goes for you. Keep us updated.
---------- Post added at 07:04 PM ---------- Previous post was at 07:01 PM ----------
@blazer072,
This thread also might be of interest. > http://forum.xda-developers.com/nexus-6/general/img-retcn-xt1115-motoxpro-lxg22-67-7-t3076881

Bricked nexus 6
blazer072 said:
Hi XDA, I have a bricked Nexus 6 and I would like to repair it by overwriting the flash memory over the JTAG interface. Does anyone know where this is on this device? I think I've found it, but can't confirm (pic attached). Much appreciated.
Click to expand...
Click to collapse
i have Bricked Nexus 6 me too, any solution ?

hadifreestyler said:
i have Bricked Nexus 6 me too, any solution ?
Click to expand...
Click to collapse
https://developers.google.com/android/nexus/images?hl=en

blazer072 said:
Here's a little more context. The device is actually a Moto X Pro (the N6 equivalent, but sold in China). The bootloader was overwritten and hard bricked the device. To repair it, I was able to restore the device to a flashable state in qhsub_bulk mode using the guide below:
http://forum.xda-developers.com/nexus-6/general/fix-fix-qhusbbulk-cm12-t3059518
However, the problem is that the factory ROM for the Moto X Pro was not released publicly by Motorola and the stock Nexus 6 ROM does not work (that's how it got into this state). It sounds like I have 2 options:
A. Find any third-party ROM for the Moto X Pro. I've been searching but to no avail. If anyone has found one, lmk!
B. Pull the system, boot, recovery partitions from a stock Moto X Pro. The problem here is that I can't sign these files to create the img and I don't think I can re-flash the bootloader. Any recommendations?
Click to expand...
Click to collapse
How did you restore the device to qhsub_bulk mode ??

Related

[Q] Toolkit Questions

Hello people,
I am fairly new to this forum and I have the following questions that I would appreciate help for.
1. Has any one rooted the I9305, HongKong ( ZHBLJ1 ) Build using the Toolkit? This build is not there in the Toolkit model selection options for I9305.
2. Can we flash the CWM intended for I9300 on our I9305 ?
Thanks in advance!
--
Pradeep
pai.pradeep said:
Hello people,
I am fairly new to this forum and I have the following questions that I would appreciate help for.
1. Has any one rooted the I9305, HongKong ( ZHBLJ1 ) Build using the Toolkit? This build is not there in the Toolkit model selection options for I9305.
2. Can we flash the CWM intended for I9300 on our I9305 ?
Thanks in advance!
--
Pradeep
Click to expand...
Click to collapse
The most simpler way to root at the moment is this:forum.xda-developers.com/showthread.php?t=2050297
As an extra you'll get a patch to security hole of exsynos syst3m.
Regarding recovery dont know for cwm but you can use goo manager from the market to flash TWRP. Just open the optios and choose something like 'install the open recovery script'.
For the case yiu are wondering, yes I am using GS3 LTE I9305.
!crazy said:
Regarding recovery dont know for cwm but you can use goo manager from the market to flash TWRP. Just open the optios and choose something like 'install the open recovery script'.
Click to expand...
Click to collapse
TWRP works for the i9305? I don't think so, the official site doesn't state it and I have not seen anywhere else that it has been ported. Then again, I haven't tried it myself
Vipeout said:
TWRP works for the i9305? I don't think so, the official site doesn't state it and I have not seen anywhere else that it has been ported. Then again, I haven't tried it myself
Click to expand...
Click to collapse
I am terribly sorry. You are right. The problem was I have both GN 2 and SG3, was tired and so mixed the devices...
Regarding root method, that works on both devices.
Here is a link for the case OP wants to install CWM:
www.androidauthority.com/galaxy-s3-gt-i9305-root-clockworkmod-recovery-126605/
Here is the direct link to xda thread in dev section;
forum.xda-developers.com/showthread.php?t=1914394
I will also try flashing twrp later when i find time and report back.
Regarding the toolkit, that's actually a question for the dev. I am going to ask him that by myself, I have donated version and since he has a thread in dev section of I9305 he should have some knowledge about this and what for his toolkit can actually be used with LTE SG3.
!crazy said:
I am terribly sorry. You are right. The problem was I have both GN 2 and SG3, was tired and so mixed the devices...
Regarding root method, that works on both devices.
Here is a link for the case OP wants to install CWM:
www.androidauthority.com/galaxy-s3-gt-i9305-root-clockworkmod-recovery-126605/
Here is the direct link to xda thread in dev section;
forum.xda-developers.com/showthread.php?t=1914394
I will also try flashing twrp later when i find time and report back.
Regarding the toolkit, that's actually a question for the dev. I am going to ask him that by myself, I have donated version and since he has a thread in dev section of I9305 he should have some knowledge about this and what for his toolkit can actually be used with LTE SG3.
Click to expand...
Click to collapse
Is there anything I need to take care of before rooting using the first method? Apart from the usual backup of data? Any issues with the Camera as mentioned in that thread? (this is pertaining to our I9305 specifically).
Thank you, I will track that Toolkit thread for I9305 as well!
Managed to root it using the app by Chainfire,
still for CWM
pai.pradeep said:
Managed to root it using the app by Chainfire,
still for CWM
Click to expand...
Click to collapse
You got link for CWM? Regarding camera problem, it doesn't have anything to do with rooting. It happens on some devices if one ticks 'patch hole' or whatever. I personally didn't have that problem but another one which maybe isn't related to the patch. It happened only once, a day ago, couldn't hear anything when calling someone or when someone was calling me. Reboot 'solved' it.
To bad that the best SG3 edition receives so little support from devs. It is probably Samsung's fault. They even change encryption method, or some parts of it, so for example with note 2 I am not able to use twrp when encrypted. In feature I am going to buy probably only nexus devices even galaxy note feature editions could pose a temptation. Bit soon we will be getting devices with 1080 resolution and hopefully there will be nexuses with bigger screen.
!crazy said:
You got link for CWM? Regarding camera problem, it doesn't have anything to do with rooting. It happens on some devices if one ticks 'patch hole' or whatever. I personally didn't have that problem but another one which maybe isn't related to the patch. It happened only once, a day ago, couldn't hear anything when calling someone or when someone was calling me. Reboot 'solved' it.
To bad that the best SG3 edition receives so little support from devs. It is probably Samsung's fault. They even change encryption method, or some parts of it, so for example with note 2 I am not able to use twrp when encrypted. In feature I am going to buy probably only nexus devices even galaxy note feature editions could pose a temptation. Bit soon we will be getting devices with 1080 resolution and hopefully there will be nexuses with bigger screen.
Click to expand...
Click to collapse
Yes from the link you gave, Thanks. I am having the problem that the CWM doesn't stick and I get the stock recovery back after the reboot.. They are talking about the /system/boot-recovery.p file which isn't on my phone. It has the /system/recovery-from-boot.p file. Are they the same file ?
Even I am surprised that our S3 model has such little support here. I am hoping that it will only get better as many people get their hands on this!! :good:

Root 4.4.4? Method Found?

Hey everyone,
First, yes I have searched for this
This thread http://forum.xda-developers.com/moto-x/general/one-stop-shop-how-root-moto-x-confusion-t2826159 as well as everything else I find still tells me that there is currently no way to root a 4.4.4 Moto X
Doing some searching on google I found this method that claims to work and it was just published about a month ago...
http://www.igadgetsworld.com/moto-x...unning-on-android-4-4-4-step-by-step-process/
I am however a little weary about the fact that still nobody on here seems to have a solution? Is this a method that will work or is it just going to brick my phone?
Sorry I am not the most knowledgeable about this stuff but have you guys seen this?
Mine is a VZW version that I am trying to root.
on4now4 said:
Hey everyone,
First, yes I have searched for this
This thread http://forum.xda-developers.com/moto-x/general/one-stop-shop-how-root-moto-x-confusion-t2826159 as well as everything else I find still tells me that there is currently no way to root a 4.4.4 Moto X
Doing some searching on google I found this method that claims to work and it was just published about a month ago...
http://www.igadgetsworld.com/moto-x...unning-on-android-4-4-4-step-by-step-process/
I am however a little weary about the fact that still nobody on here seems to have a solution? Is this a method that will work or is it just going to brick my phone?
Sorry I am not the most knowledgeable about this stuff but have you guys seen this?
Mine is a VZW version that I am trying to root.
Click to expand...
Click to collapse
Those on 444 with the old X & Ultras are waiting for jcase & others to come up with some way to get Dan Rosenberg's exploit to work. Jcase said so far root is needed.
So root alone or temporary root to unlock the boot are yet to be found.
---------- Post added at 07:06 PM ---------- Previous post was at 07:05 PM ----------
You will hear about it here
http://forum.xda-developers.com/moto-x/general/request-help-exploit-moto-x-bl-t2828471
Thanks for pointing me to that thread I will keep an eye on it. However I still don't fully understand what is this method I have linked to then?
In short this will not work? Sorry I feel a little ignorant asking these questions...
wrong place
Well I have to admit my mistake. I've just realized this was supposed to be posted in the original moto x section as opposed to the moto x 2014.
Can somebody please move this for me? Sorry for any confusion this may have caused...
on4now4 said:
Thanks for pointing me to that thread I will keep an eye on it. However I still don't fully understand what is this method I have linked to then?
In short this will not work? Sorry I feel a little ignorant asking these questions...
Click to expand...
Click to collapse
The method you linked is enabled by an unlocked boot! All unlocked bootloaders have easy root.

Various radio files for Xt1095 Pure.?

Is anyone willing and able to create a thread which will organize the various radio files that we could flash on Pure edition Xt1095? Haven't seen one so just asking. Used the latest Brazil one from 5.1 release, latest Pure soak test, and now back to original. Would be cool to have some organization for us pure users
Sent from my victara using Tapatalk
icedmayhem said:
Is anyone willing and able to create a thread which will organize the various radio files that we could flash on Pure edition Xt1095? Haven't seen one so just asking. Used the latest Brazil one from 5.1 release, latest Pure soak test, and now back to original. Would be cool to have some organization for us pure users
Sent from my victara using Tapatalk
Click to expand...
Click to collapse
I´m missing this thread too
flitzjoy said:
I´m missing this thread too
Click to expand...
Click to collapse
If someone could post not only the victara 5.1 radio chart but also gives proper information about working GSM|CDMA|LTE bands with each radio, then it would be the whole story. :angel:
Messengerskiller said:
If someone could post not only the victara 5.1 radio chart but also gives proper information about working GSM|CDMA|LTE bands with each radio, then it would be the whole story. :angel:
Click to expand...
Click to collapse
Still nothing? I ve searched high & low for these guys. I have a Brazillian Marshmallow update & no radio connection
I had the hunch that maybe just extracting the files [idk what they might look like either] and putting them onto this phone, some Frankenstien work.
I read on another dead thread that someone copied fsg.mbn & NON-HLOS.bin from a different rom and they got it to work, I had no such luck.
My main issue was getting my 6.0 in any way but since I have the Moto Pure [& a low end AT&T network Defense Mobile] I should just get this update naturally. OTA seems like it has its fair share of Stagefrieght itself. AND SO, HERE WE ALL ARE.
This shoud help us out for now...
WHAT DOES A RADIO FILE LOOK LIKE?
---------- Post added at 08:06 PM ---------- Previous post was at 07:53 PM ----------
HEY I found this Thread your looking for its Moto phones starting @ Moto G but it could cbe converted to all Moto or be remade for Moto X.
http://forum.xda-developers.com/showthread.php?t=2649763
If there are any senior members that know how to do this, Id be happy to learn how to set this up on Xda for everyone.
WhiteRaven96 said:
Still nothing? I ve searched high & low for these guys. I have a Brazillian Marshmallow update & no radio connection
AND SO, HERE WE ALL ARE.
This shoud help us out for now...
WHAT DOES A RADIO FILE LOOK LIKE?
Click to expand...
Click to collapse
I've messed up my XT1092 and believe that the radio file might be what I need to fix it, so I'd also appreciate a big thread being set up. I've also made a request thread here for the particular file I need.
edit: managed to fix it using the modem file from 5.1. Details are in my thread, linked above.

Custom Roms

I saw in another post that the kernel source got released, Im new to this, I was reading a post about how to create custom roms and all that, and i was wondering , we do need root access to get the system files and all that to begin working on a rom ?
What i wanted to do was basically a full stock lollipop rom, but with the Axon Software ( Camera, Dolby Digital, and a few other things ).
I dont have any background expirience creating roms, but whats leading me to this is , loving the phone but hating the toggles, and a few other software bugs ive encountered.
I have some programming knowledge, and I will make this my little side project if theres any chance for it to be done. If anyone has some background and wanna help/teach me, ill be thankfull.
This is the link I been following.
http://forum.xda-developers.com/showthread.php?t=1801690
I have no programming knowledge, but I'll gladly provide moral support and encouragement in this endeavor! A stock lollipop rom with ZTE features would be spectacular.
StaticMoot said:
I have no programming knowledge, but I'll gladly provide moral support and encouragement in this endeavor! A stock lollipop rom with ZTE features would be spectacular.
Click to expand...
Click to collapse
I know right ? Well, If by any chance it can be done, ill keep trying. I guess first we need root.
I would like to support this and I have some java and c++ programming experience. The only problem is that there hasn't been any word on root methods or bootloader unlock methods. Supposedly ZTE phones come bootloader unlocked already, but I haven't been able to prove this since we can't access the bootloader via fastboot :/ if we can at least get root that would be a good start.
Marshmallow on Axon Elite?
Hi all,
I came across this poat while checking for new ROMS. If this checks out I would happily go for the Elite as the price point and features are value for money. For those of you who do have it can you confirm that this is actually a Marshmallow ROM.
Moderator Edit : Links Removed
Thanks all
Danaim said:
Hi all,
I came across this poat while checking for new ROMS. If this checks out I would happily go for the Elite as the price point and features are value for money. For those of you who do have it can you confirm that this is actually a Marshmallow ROM.
Moderator Edit : Links Removed
Thanks all
Click to expand...
Click to collapse
What's up with all of the surveys?
That's what I thought but beyond that has anyone managed to actually get the ROM and verify it to be working?
I am on the cross roads for a new phone.
---------- Post added at 07:27 AM ---------- Previous post was at 07:24 AM ----------
Sub-Negro said:
What's up with all of the surveys?
Click to expand...
Click to collapse
That's what I thought but beyond that has anyone managed to actually get the ROM and verify it to be working?
I am on the cross roads for a new phone. Also would like to know the XDA source mentioned as am sure it won't have ads to download.
Danaim said:
That's what I thought but beyond that has anyone managed to actually get the ROM and verify it to be working?
I am on the cross roads for a new phone.
---------- Post added at 07:27 AM ---------- Previous post was at 07:24 AM ----------
That's what I thought but beyond that has anyone managed to actually get the ROM and verify it to be working?
I am on the cross roads for a new phone. Also would like to know the XDA source mentioned as am sure it won't have ads to download.
Click to expand...
Click to collapse
I am on the Lux model and it's full of Chinese software that I can't even read and I have no access to google apps.
Sub-Negro said:
I am on the Lux model and it's full of Chinese software that I can't even read and I have no access to google apps.
Click to expand...
Click to collapse
I was hoping to get the Elite and be able to flash it as the phone had a lot of potential!
You need to install Google Play Services and Google Services Framework. You will need to sideload these apk's. You will need to Google them.
Please, how can i upgrade my ZTE AXON Elite to Android 6.0? Is it posisible? Thanks
Marshmallow isn't available for this device yet.
When will a custom ROM appear for the Axon Pro?I hate all these chinese stuff and i would like to have the option to reset the phone and redo all the Gmail account,without the phone asking me for the last gmail account.I bought the phone from a friend and i did a reset later that day and it kept asking me for the old account.It sayd that the phone was reset and needs the old account and i couldn't go forward because it kept connecting to google and asked for the old account.I had to use my friends account again to use the phone.I want a simple rom,without this stupid connection to google and other chinese stuff.Any idea when a rom will be available?
No clue but now that you have your friends Google account you should be able to delete it and add your own.
I'm surprised that there isn't any custom roms for this phone yet,i mean its a phone with 4gb of ram,810 Snapdragon so its pretty powerful.
[/COLOR]
raduch said:
When will a custom ROM appear for the Axon Pro?I hate all these chinese stuff and i would like to have the option to reset the phone and redo all the Gmail account,without the phone asking me for the last gmail account.I bought the phone from a friend and i did a reset later that day and it kept asking me for the old account.It sayd that the phone was reset and needs the old account and i couldn't go forward because it kept connecting to google and asked for the old account.I had to use my friends account again to use the phone.I want a simple rom,without this stupid connection to google and other chinese stuff.Any idea when a rom will be available?
Click to expand...
Click to collapse
Why didn't you just do a factory reset? Also, Chinese stuff?
Jonathan.Parker2005 said:
[/COLOR]
Why didn't you just do a factory reset? Also, Chinese stuff?
Click to expand...
Click to collapse
I did a factory reset and it keeps saying that the phone was reset and i need to enter the gmail account that was previously entered.I also tried entering 15-20 time in a row ,because a lot of people say on forums that on note 4 and other phones if you enter the wrong account,the phone will reset and it will let you enter another account.On ZTE this doesn't work .
Jonathan.Parker2005 said:
[/COLOR]
Why didn't you just do a factory reset? Also, Chinese stuff?
Click to expand...
Click to collapse
He probably has a Chinese model. I have the Lux so I know exactly what he is talking about.
Sub-Negro said:
He probably has a Chinese model. I have the Lux so I know exactly what he is talking about.[/QUOTEA friend of mine is a ballet dancer and he bought it when he was on tour in Shanghai,so i think it's the chinese model.
Click to expand...
Click to collapse
Nothing new for the AXON PRO?

[ROM][Stable]Stock Debloated 1.23.1550.3 MetroPCS

This Is My First Shot at making something for this device,so please bear with me.
This Is A Custom Stock ROM that has been debloated and slimmed down a bit to my personal liking.
ive used SuperR's Kitchen on Ubuntu to bring this to you guys.
i used Captain_Throwbacks Metro Base ROM as a starting point.
i will include my list of apps that i have removed in the second post.
i would suggest a factory reset and dalvik/ART wipe
as always,if your device explodes or stops working,i assume no responsibility for any damages or data loss.
flash at your own risk.
if anyone has any suggestions and/or input,please feel free.
im no developer,just taking a shot at this.
the goal is to remove as much bloatware as possible,whilst maintaining stability.
:highfive:
i added /data/app support as well as busybox & deodexed the ROM.
im currently uploading my first build to google drive and will share links shortly.
bear with me as i dont have the best internet connection.
DeZiREv5K
OP Updated with newer build.
Code:
6-14-16 build changelog
--Removed HTC Launcher(replaced with google now launcher)
--updated play store to latest version
--updated HTC Service pack to latest and integrated back into ROM(no longer needs Seperate download)
--attempted to add back the official metropcs device unlock app(Thanks [user=3100103]@sandix[/user] !)
6-16-16 build changelog
---removed google play launcher & replaced with nova launcher(issue with installment on first boot)
6-19-16 build changelog
-- changed ZIP compression method(v3 was too large)
This is A Flashable Zip,should flash in TWRP.
Special Thanks to the following folks:
@sandix for the continuous hard work in the forums here
@Captain_Throwback for his stock rooted metroPCS ROM.
@SuperR. for his Excellent Kitchen!!!
@nightbreed813 for his thread layout & list of modifications to his ROM
This Is My Bloat_Custom File that i edited by hand to suppliment in the kitchen.
these are all the apps/folders that were removed prior to building.
Code:
system/app/BasicDream*
system/app/Calculator*
system/app/CalculatorWidget*
system/app/Chrome*
system/app/Cloudex*
system/app/CloudPrint*
system/app/Drive*
system/app/DriveActivator*
system/app/Exchange3Google*
system/app/FaceLock*
system/app/Font_Helvetica*
system/app/Font_XinGothic*
system/app/Font_Yuen*
system/app/Gmail2*
system/app/GoogleTTS*
system/app/Hangouts*
system/app/HoloSpiralWallpaper*
system/app/HtcCarGps*
system/app/HtcBackupReset*
system/app/LiveWallpapaers*
system/app/HtcLogLevel*
system/app/HTC_Connect*
system/app/HTCZero*
system/app/IMEMurasuIndic*
system/app/IMEMurasuViet*
system/app/IME_TP_Basic*
system/app/IME_TP_ValueAdd*
system/app/Kidmode-google*
system/app/Maps*
system/app/MPCS_Blockit*
system/app/MPCS_Metro411*
system/app/MPCS_MyMetro*
system/app/NoiseField*
system/app/PhaseBeam*
system/app/Photos*
system/app/PrintStudio*
system/app/talkback*
system/app/YouTube*
system/priv-app/HtcDotMatrix*
system/priv-app/HtcFileManager*
system/priv-app/HtcDLNAMiddleLayer*
system/priv-app/MPCS_MetroAppStore*
system/priv-app/iCloudTransfer*
system/priv-app/MPCS_MetroZONE*
system/priv-app/MPCS_RSU*
system/priv-app/LMIRescue*
system/priv-app/Velvet*
system/priv-app/LMIRescueSecurity*
system/priv-app/HtcSoundrecorder*
system/priv-app/Twitter*
system/priv-app/MirrorLink_MirrorLinkService*
system/priv-app/MPCS_Lookout*
system/priv-app/PolarisOffice*
system/priv-app/Mail*
system/priv-app/HTCSpeakCyberon*
system/priv-app/Facebook*
system/media/audio/notifications*
system/media/audio/ringtones*
system/media/audio/alarms*
TO DO List:
edit updater script to change out rom title
check what works and what does not
(Possibly) remove More files/Free up more space
upload newer build as first one fail with status 7 in recovery.(assert error)
Check my build and compare to yours to see what can be removed. I'm sure you will find a lot more that can be done.
when will a working link be available? very excited for this rom
talking_llama said:
when will a working link be available? very excited for this rom
Click to expand...
Click to collapse
i already uploaded a newer build,will update OP with working link.
@sandix ,thank you very much i definitely will do that!
worked for me, thank you!
sweet. finally a flashable rom for our metro variant. was debating on trying nightbreed's rom, as someone mentioned in that thread that they tried it and it worked. didn't want to kill the phone though as it is a daily driver. will report after using.
Ipoke Smot said:
sweet. finally a flashable rom for our metro variant. was debating on trying nightbreed's rom, as someone mentioned in that thread that they tried it and it worked. didn't want to kill the phone though as it is a daily driver. will report after using.
Click to expand...
Click to collapse
Let me know how it works out.also,if you have any suggestions feel free to throw them out here.
so i assume i have to install TWRP and flash this?
corrado85 said:
so i assume i have to install TWRP and flash this?
Click to expand...
Click to collapse
Yeah it's required
Just looking at channel log I'm assuming this is still relevant. I'm on V3 and with some frustration (I don't have Wi-Fi and had to trick my 6yr old laptop to boot up) I got it running well.
As someone who has hard bricked smart phones since the xv6800, this is a first good go. Inspires me to start cooking my own roms.
Suggestion: A file browser would have made it so much smoother. No one with half a brain will ***** about es file explorer or root browser being cooked in. Fortunately bad habits inspired me to always backup original stock. Most people would've been screwed there. Dirty flash. Pdanet. Got it all up and going.
Keep up the good work. Look forward to any tweakings you find out of my league
Sincerely,
Satisfied end user
Sent from my HTC Desire 626s using Tapatalk
trekie4ever said:
Just looking at channel log I'm assuming this is still relevant. I'm on V3 and with some frustration (I don't have Wi-Fi and had to trick my 6yr old laptop to boot up) I got it running well.
As someone who has hard bricked smart phones since the xv6800, this is a first good go. Inspires me to start cooking my own roms.
Suggestion: A file browser would have made it so much smoother. No one with half a brain will ***** about es file explorer or root browser being cooked in. Fortunately bad habits inspired me to always backup original stock. Most people would've been screwed there. Dirty flash. Pdanet. Got it all up and going.
Keep up the good work. Look forward to any tweakings you find out of my league
Sincerely,
Satisfied end user
Sent from my HTC Desire 626s using Tapatalk
Click to expand...
Click to collapse
Thank you for the input,much appreciated.also,i updated OP with a newer build that uses nova launcher as default and puts back a few apks that got cutout by mistake.
My phone got simlocked after trying this ROM. It's still locked even after restoring the nanodroid backup I made prior to flasing this ROM.
I'm not in the US sooo I am not using sprint.
Any advice?
Thanks
sgeto said:
My phone got simlocked after trying this ROM. It's still locked even after restoring the nanodroid backup I made prior to flasing this ROM.
I'm not in the US sooo I am not using sprint.
Any advice?
Thanks
Click to expand...
Click to collapse
This ROM is based off of the original Stock MetroPCS USA variant,i didnt add anything that would potentially affect your simlock status.ive only removed stuff that was already there.
If youre not in the US and youre not using MetroPCS Variant of the phone,you shouldnt be flashing this ROM to be 100% honest.flashing incompatable firmwares across devices can sometimes lead to bricks.whats your Carrier and device?
sgeto said:
My phone got simlocked after trying this ROM. It's still locked even after restoring the nanodroid backup I made prior to flasing this ROM.
I'm not in the US sooo I am not using sprint.
Any advice?
Thanks
Click to expand...
Click to collapse
https://www.mediafire.com/?451vq4nmp7paz2a
i2andog said:
https://www.mediafire.com/?451vq4nmp7paz2a
Click to expand...
Click to collapse
That APK will just crash,as the required lib files etc to accompany the APK are missing.
GotHeart said:
This ROM is based off of the original Stock MetroPCS USA variant,i didnt add anything that would potentially affect your simlock status.ive only removed stuff that was already there.
If youre not in the US and youre not using MetroPCS Variant of the phone,you shouldnt be flashing this ROM to be 100% honest.flashing incompatable firmwares across devices can sometimes lead to bricks.whats your Carrier and device?
Click to expand...
Click to collapse
I agree. It's very unusual.
I got this phone from a local phone shop. The owner seem to have unlocked the phone with some kind of service. I contacted my carrier who wrote down a couple of numbers from inside the phone (including the original phone number) and boom, I was able to use the phone with my number.
I have a theory about the error. Maybe you could see if that makes sense:
Maybe the phone isn't locked. But after a factory reset it keeps trying to "activate" the phone using the methods given by sprint.
There's this one step during the initial setup (right after factory resetting the phone) where it tries to register the phone, and fails. This step takes at least tem minutes and returns an error that locks up the phone.
I think the phone assumes that it's locked because it's not able to "reach" sprint servers and denies all incoming and outgoing calls/messages because of this.
If you know a way out of this please let me know.
Another user also provided me with an app that seems to be solving the issue. But it's not marshmallow compatible. Any ideas on that one as well?
Thanks a lot. And great debloating work you did there
---------- Post added at 05:37 PM ---------- Previous post was at 05:34 PM ----------
GotHeart said:
That APK will just crash,as the required lib files etc to accompany the APK are missing.
Click to expand...
Click to collapse
Please tell me more about this app. Cam it solve my issue?
Thx
sgeto said:
I agree. It's very unusual.
I got this phone from a local phone shop. The owner seem to have unlocked the phone with some kind of service. I contacted my carrier who wrote down a couple of numbers from inside the phone (including the original phone number) and boom, I was able to use the phone with my number.
I have a theory about the error. Maybe you could see if that makes sense:
Maybe the phone isn't locked. But after a factory reset it keeps trying to "activate" the phone using the methods given by sprint.
There's this one step during the initial setup (right after factory resetting the phone) where it tries to register the phone, and fails. This step takes at least tem minutes and returns an error that locks up the phone.
I think the phone assumes that it's locked because it's not able to "reach" sprint servers and denies all incoming and outgoing calls/messages because of this.
If you know a way out of this please let me know.
Another user also provided me with an app that seems to be solving the issue. But it's not marshmallow compatible. Any ideas on that one as well?
Thanks a lot. And great debloating work you did there
---------- Post added at 05:37 PM ---------- Previous post was at 05:34 PM ----------
Please tell me more about this app. Cam it solve my issue?
Thx
Click to expand...
Click to collapse
Again,what is your Carrier?if youre using anything other than MetroPCS USA,you should not use this ROM.thats #1.#2 is if youre using sprint,you should get the RUU to return the phone to factory software,and i assume youre using sprint because our Metro devices havent gotten MM yet,and you mentioned it.
And yes,CDMA/Sprint phones will not work correctly if theyre not provisioned from the carrier correctly.so if the activation is failing,then youre not going to be able to use the device to send messages etc until its activated correctly.
Suggestion,try using nightbreeds MM ROM thats for those kinds of carriers.
GotHeart said:
Again,what is your Carrier?if youre using anything other than MetroPCS USA,you should not use this ROM.thats #1.#2 is if youre using sprint,you should get the RUU to return the phone to factory software,and i assume youre using sprint because our Metro devices havent gotten MM yet,and you mentioned it.
And yes,CDMA/Sprint phones will not work correctly if theyre not provisioned from the carrier correctly.so if the activation is failing,then youre not going to be able to use the device to send messages etc until its activated correctly.
Suggestion,try using nightbreeds MM ROM thats for those kinds of carriers.
Click to expand...
Click to collapse
Oh lesson learned. I'm from Yemen and my carrier is YemenMobile (CDMA). I don't know why but I assumed that the phone won't mind the ROM since it was kinda unlocked. SORRY.
The phone was saying Sprint when I bought it. I think I'm going to get back to factory and see if that does the trick. :-/
My extended apologies

Categories

Resources