Database Develop

Linksys WRVS4400N with XDA IIi

I cannot connect my new wireless N router to XDA IIi, works with my old router
Setup:
B/G mixed
Wireless Channel:auto
WPA with TKIP
Connects fine with no Security
A my other equipment connects inculding laptop and PSP
Could someone help please?

[Q] wifi antenna external?

was wondering if there was some kind of external wifi antenna that maybe uses the usb/mini usb. most of the ones in the local electronic stores are for windows plat forms and im pretty sure wont work.

Probably not because they would require drivers.

Smart repeater
Ronyx said:
Probably not because they would require drivers.
Click to expand...
Click to collapse
Doesn't phyically connect to your tab, but, if your looking to extend your range/reception in your house you could use an amped Wireless Smart repeater http://www.ampedwireless.com/products/sr300.html. I actually chose the access point version http://www.ampedwireless.com/family/accesspoints.html for my house to improve the wireless signal on the second floor. Works great.
The difference between the access point & repeater is the a/p requires a phyical connection to the network & the repeater doesn't. Max throughput on a/p is 300mbps & repeater is 150mbps (since it has to transmit wirelessly to your existing router & wireless clients).

thanks, i definately didnt want to have anything hangin off my tablet, kinda defeats the purpose, i like the repeater, ill check it out

Cheap mode: any router that supports DD-WRT - just put it into 'bridge' mode.
Fancy: the new Cradlepoint CTR35 can work as wifi repeaters as well as a hotspot

[Q] Help needed in combination of WiFi.... Radio.... oxygen1mod & USB adapter

Guys and gals...
i've searched my query here in this forum but still couldn't find the exact solution.
Im pretty new to this entire "android" platform. just got my nexus one rooted and unlocked.
my only concern here is regarding "wifi Problem". I've got linksys Compact wirelss-G USB adapter (WUSB54GC).
Now I don't know how to access it just like a router.
Secondly, When i started using it with nexus one it connected without any flaw. But some days after It's not connecting with N1, having said that
I've also used this adapter with Ipad2 and sometimes the wifi doesn't connect to the ipad2 properly.
Now how I was connecting like I always delete the existing adhoc connection and create another one and then try to connect... after few tries it connects but after few days N1 says obtainig IP address... and in windows 7 the status says connected with "no network access"
I tried "WEP and other protocols" and also without any encyption as well but nothing is working here.
Actually In our country we dont have 3G network we're still on EDGE and that costs us much so here I'm relying on my home USB 1MB connection to use it via adapter.
Currently Im using Oxygenmod FINALE
Please help me whether it's my N1 or the adapter or should there be anything wrong with the Radio i've got v4.06. with oxygen1mod finale
Ask me anything If u feel.
And yeah BTW I didn't know that Android is an open source so u can call me a "Nwwwwweeeeebbbb"

I am not familiar with Oxygenmod, but if it is Gingerbread based, I would highly recommend updating your radio to 5.08.

bassmadrigal said:
I am not familiar with Oxygenmod, but if it is Gingerbread based, I would highly recommend updating your radio to 5.08.
Click to expand...
Click to collapse
Thanks... But let me update it that I've just updated to 5.12 radio... I was too curious that's y i played the bet. after update nothing seems to me different network signals are same i.e 100% blutooth working and havnt tried EDGE. WiFi still not working and stuck at "obtaining IP address"
Actually In our country we dont have 3G network we're still on EDGE and that costs us much so here I'm relying on my home USB 1MB connection to use it via adapter.

I don't believe these phones have proper support for ADHOC, but it seems it is more of a computer problem if the ipad is having issues as well. Is there a reason you are trying to do an adhoc wireless network instead of getting a cheap wireless router?

bassmadrigal said:
I don't believe these phones have proper support for ADHOC, but it seems it is more of a computer problem if the ipad is having issues as well. Is there a reason you are trying to do an adhoc wireless network instead of getting a cheap wireless router?
Click to expand...
Click to collapse
well it's the first time I've got this USB adapter so I only know of this adhoc connection being made in win 7. havnt experienced a router though.
but could u please confirm if any cheap router supports my USB internet connection? (i dont have a DSL connection rather wireless)

Gablu said:
well it's the first time I've got this USB adapter so I but could u please confirm if any cheap router supports my USB internet connection? (i dont have a DSL connection rather wireless)
Click to expand...
Click to collapse
I doubt any router would support the usb wireless adapter, but you can use windows internet connection sharing to share the connection through the wired connection. Then you can hook the router into your ethernet port on your computer and share the connection that way.
Definitely not the easiest, but I have never tried sharing an internet connection through an adhoc wireless connection.

bassmadrigal said:
I doubt any router would support the usb wireless adapter, but you can use windows internet connection sharing to share the connection through the wired connection. Then you can hook the router into your ethernet port on your computer and share the connection that way.
Definitely not the easiest, but I have never tried sharing an internet connection through an adhoc wireless connection.
Click to expand...
Click to collapse
I think I need to clear something here....
My ISP gave me a USB called (EVO), I just plug that "EVO" into my computer and I can download upto 3.1Mbps and browse and surf yada yada...
then I bought "linksys USB adapter" to make my internet connection WiFi.
Now how would I connect my N1 to internet via WiFi when u say "adhoc" is not supported.
Is there anything apart from what "Bassmadrigal" suggested.? (caz it sounds too technical for me)

I don't know if ADHOC is actually supported (and if it is, how well it is supported) on Android. But if you are having issues with devices other than your phone, then I think it is going to be a computer issue that probably won't be able to be fixed with any devices on your phone.
I can try to make it a bit more non-techincal...
Buy a cheap wireless router and use the router's guide to get a wireless network set up
Plug in the network cable from the computer's network card to the "internet" port on the router
Follow this guide to get Internet Connection Sharing up and running on your computer
???????
Profit

[Q] Network problems

Hello.
Since XDA is the only forum I'm loyal to I decided to ask you guys.
I've get my broadband directly from ethernet ports integrated in my walls, and all those ports are connected to a switch. The problem is that I've got a wifi router that I'd like to use so I can connect my laptop and my phone to the network, which works fine if I connect it to one of the ports in my walls, but I also have a XBox 360 connected to one of these ports. And since I always stream music and video from my laptop to my XBox this gives me a problem.
I've temporarily solved this by setting up the router right beside my XBox and hooking the XBox to the router, and it works fine, but I can't connect to the wifi if I leave my livingroom.
Also tried to connect the router inbetween the switch and the cables that goes to the wall ports, but this was totally useless because then I only had acceptable wifi connection in my hallway and my kitchen.
So my question is this, is there anyway to have the router connected to one of these ethernet ports, my computer connected to the router and the XBox connected to another ethernet port and get them to be able to communicate?
EDIT: Disabled DHCP on the router as I've found in a guide, but that was only possible to do on the LAN part of the router, no such setting on the wireless page, so still the same problem.
Sounds a bit compilcated I guess, but I think it should be possible to use this router as some kind of extender for the already existing network.
Regards
Izaac

Tell me, how large is your living room again? -____-
Jk, alright, from my point of view, just place the router at the farthest point between those three gadgets, and buy a wifi extender for the other two. That thing just a couple of bucks anyway. Problem solved. No need for another router.

What is your switch currently connected to for internet access?
If you have it hooked to a modem, then it is probably a 1 port router/modem since you don't have problems drawing an ip on your other items.
You are on the right track. Turning off DHCP is correct. There is no dhcp on the wireless portion so don't look for it. Then you want to set your wireless router with a static ip on your lan side so you can get into it if you need(use something out of the normal range like xxx.xxx.xxx.200). Make sure the static IP is part of your LAN subnet. Those two things turn your wireless router into a switch/wireless access point. From here on out forget about the WAN or Internet port on the router. Use only the LAN ports.
You can now use this wifi router anywhere you want. Place it where you get the best wireless signal.
Wire things up this way wherever you place it:
Connect wall ethernet port to one of the LAN ports. Then connect any other devices needing internet access to the other LAN ports.(Computer, XBOX, whatever...)
Then connect wirelessly with your wireless device.
If you need to modify the router settings, you can browse to xxx.xxx.xxx.200 ( or whatever you set the router static lan ip to) from your computer .
Any devices that need DHCP will draw the address from further upstream from the modem/router.

I live in a two floor appartment with the router on the second floor, most of the building is made of concrete, my router is on the second floor, and i have excellent reception all over the place.
- How long is your cable (from the router to the wall 1 meter? 5? Make it as short as possible)
- Are you using 2.4 GHz or 5 GHz? The most common frequency is 2.4, so if your neighbours are using 2.4, it might disrupt your connection from time to time, so try to change the channel.
- Move the router if your wireless phone or any wireless things are operating on 2.4 GHz nearby. They will disrupt the signal.

Oy..... I forgot to tell him to get Wi-Fi Analytics from the play store to check his signal and find the best channel to use.

Needing Network advice

Ok I'm moving into a new house and I'm going to set up the house with better access to Wi-Fi and Ethernet connections.
I have a 300mb fiber connection. It's connected via a Netgest Nighthawk X6 rR8000. I'm wanting to expand the Wi-Fi network throughout the house for better connectivity but I also want to add a switch or 2 so I can connect my Hopper 3, Apple Tv, Xbox One etc via Ethernet.
So I was thinking of this:
Fiber >Nighthawk>switch, so I can connect my office via ethernet / Add a 2nd router as a reapter>switch on it near my devices for wired connections.
Is this a good way of doing it? What router should I use with the Nighthawk as a reapter that will automatically switch over networks without having to reconnect to the other? Or is there a better way to do all this? I'm open to ideas. Thanks in advance.

Any suggestions? 'm looking for the best way to set everything up so I can extend the Wi-Fi in the house and be able to use a switch to connect devices to Ethernet at my entertainment center