hello
excuse me for my English
good I read and reread every tutorial I found but I'm blocking
Here is my configuration sgs
Version 2.2
I9000BUJP5
2.6.32.9.root @ SE-S611 # 1
FROYO.BUJP8
Phone rooter
recovery ok
download ok (natively on this)
PDA: I9000BUJP8
PHONE: I9000BUJP5
CSC: I9000GSFRJP4
The recovery mode is the third recovery
by reading the tutorial from some site, it does not have to go in JPY recovery but it must be second
and the second recovery must be in JPY
So my question (which is probably very stupid)
How to place 3rd in the recovery recovery for the second update to a rom with newest show a custom rom
because I'm looking on the forums that I know I can not find, or I'm a big spot comprehension question will know
has the support
Thank you
Just flash another ROM with odin like JM8
(link=> http://www.multiupload.com/FCYKST8QBO)
if I understand it enough to flash using odin with official rom so that I spend in recovery 2?????
si je comprend bien il suffit de flasher en utilisant odin avec une rom officielle pour que je passe en recovey 2e????
Follow darkys 9.2 resurrection . Its video will show u
Sent from my GT-I9000 using XDA App
can i unlock botoloader when i have :semc simlock certificate and date of manufactury 11w11.I think i mus run the msm7227_semc.Sorry for my bad English i am Poland.
yes you can. i have 11w28 and managed to bootload it
botoloader x8
thank you.I try after one week
botoloader x8
I am scared of i brick my phone sorry for my bad English.I am Poland
przemek4113 said:
I am scared of i brick my phone sorry for my bad English.I am Poland
Click to expand...
Click to collapse
if u can't handle the risk, better stay on stock kernel and avoid unlocking your bootloader and install only custom rom for stock kernel..
from what you're saying it relatively safe to unlock your bootloader.. but still the risk is yours
botoloader x8
I try of one week .I am busy in school.thank you.
A więc tak ja miałem 11w24 i spokojnie odblokowałem bootloader'a bez uceglenia telefonu , po prostu uruchom to co napisałeś: msm7227_semc i rób co pisze najlepiej tutaj na forum znajdziesz link jak go odblokować tam pisze co i jak po kroku ja tak zrobiłem i bootloader jest już odblokowany.
I know that u wouldn't understand me because i write to him in polish (yes im polish 2 but i lived in ireland)
what is bootloader ?? sorry m a noob
botoloader x8
Thanks to all for help i unlock the bootloader
Hi,
I recently got an Galaxy Note, Brazilian one, Carrier VIVO.
i past the last week searching an way to root it, all the methods i've found didn't work.
On Dr. Ketan thread i cant find an option for the KL2 kernel.
Here is my device data:
Model: GT-N7000
Android Version: 2.3.6
Baseband: N7000UBKL2
Kernel: [email protected]30 #2
Compilation Number: GINGERBREAD.UBKL2
Check Fus Output:
Device: GT-N7000
Product Code: GT-N7000ZBlZVV
PDA: N7000UBKL2
Phone: N7000UBKL2
CSC: N7000ZVVKL2
Someone have a tip to help me do this?
If it is like all the other updates that Samsung has done, you can't directly root it.
You'll have to follow his thread, downgrade the rom, root it, using ODIN, then update it with a prerooted rom.
Please read Dr.Ketan's thread here. It's all in there.
If your device is not carrier restricted, downgrade to older ROM, then root n then update to your present ROM, using CWM/Mobile Odin
dr.ketan said:
If your device is not carrier restricted, downgrade to older ROM, then root n then update to your present ROM, using CWM/Mobile Odin
Click to expand...
Click to collapse
The rom installed on device is an carrier one ( Vivo ), but the device is currently GSM unlocked.
Does it matter?
Hi "alxbd"!
I am from Brazil too. As "jellevanb" sugested, follow the Dr Ketan post. But pay attention: your actual firmware is not available yet on our big STOCK ROM list.
Could someone understand why this ROM (N7000UBKL2) is not available on our list yet?
Dr Ketan could help us?
I can make an dump, if someone can explain how.
enlacetelecom said:
Hi "alxbd"!
I am from Brazil too. As "jellevanb" sugested, follow the Dr Ketan post. But pay attention: your actual firmware is not available yet on our big STOCK ROM list.
Could someone understand why this ROM (N7000UBKL2) is not available on our list yet?
Dr Ketan could help us?
Click to expand...
Click to collapse
As op said it is available on chexk fus, then u can download from there.
Forst root then update using cwm/mobile odin
If someone have downloaded it feom check fus, kindly upload on file host, i will update to stock thread.
Sent from my GT-N7000 using xda premium
So, in order to get root I will need to flash an older ROM, right?
If so, which one on ketan list is more safe for me, my original tom don't exists on check fus, can I flash one of the open Europe?
Thx guys.
Sent from my GT-N7000 using xda premium
I will sugget you this for downgrade
N7000XXKL3 ------ 2.3.6 2011 December-------- N7000ODDKL1 --------------------India
- It is rootable, i have root it.
- Non wipe, so you won't lose data.
After downgrade ROM, just follow my guide to get it rooted.
after that you can update to any ROM
Ok, will do this when arrive at home.
Thank you a lot.
Sirs,
based on previous information from "alxbd", I found this brazilian firmware UBKL2 inside CHECK FUS downloader. The results from CHECK FUS is:
Product Code: GT-N7000ZBLZVV
Latest firmware: N7000UBKL2/N7000ZVVKL2/N7000UBKL2/N7000UBKL2
Modified: 03/01/2012 14:41:33
Filename: GT-N7000_ZVV_1_20120103144111.zip.enc2
Dr Ketan, could you please update your great big list with this new version?
Thanks.
Rom Stock Brazil ZTO
Hi, i can´t found my stock rom at check fus download. My rom are clean brazilian rom (ZTO) (without carrier stuffs)
Model/Device: GT-N7000
Product Code: GT-N7000ZBLZTO
PDA: N7000UBKK3
Phone: N7000UBKK1
CSC: N7000ZTOKK1
Kernel: 2.6.35.7-N7000UBKK3-CL702304
[email protected] #2
Please help me.
Thiago Fialho said:
Hi, i can´t found my stock rom at check fus download. My rom are clean brazilian rom (ZTO) (without carrier stuffs)
Model/Device: GT-N7000
Product Code: GT-N7000ZBLZTO
PDA: N7000UBKK3
Phone: N7000UBKK1
CSC: N7000ZTOKK1
Kernel: 2.6.35.7-N7000UBKK3-CL702304
[email protected] #2
Please help me.
Click to expand...
Click to collapse
En:
You can get this firmware on Checkfus (Google it).
Pt:
Da pra bixar esste firmware no Checkfus, to baixando agora.
Hi,
DONE.
Thank you very much.
Used the indian rom wich Ketan indicated, worked like a charm.
Opa!
Fala alxbd, comprei um note faz umas 2 semanas. Só quem veio Stock da TIM.
Estou com uma dúvida, de que se seguir esse método do dr.ketan, fique aparecendo aquele triangulo amarelo ou aumento o counter de firmware. Aconteceu isso com você?
Também achei o tutorial um pouco confuso... mas no caso é só seguir o que está escrito na pagina né? Usar o Odin do PC pra flashear uma room antiga e depois usar o Odin Mobile pra dar root.
Desde já agradeço.
ENG:
Just bought GNOTE in Brazil, but in different carrier (TIM). I wanna know if Dr Ketan´s method avoids the yellow triangle sign after root.
Thx all
Nckvrd said:
Fala alxbd, comprei um note faz umas 2 semanas. Só quem veio Stock da TIM.
Estou com uma dúvida, de que se seguir esse método do dr.ketan, fique aparecendo aquele triangulo amarelo ou aumento o counter de firmware. Aconteceu isso com você?
Também achei o tutorial um pouco confuso... mas no caso é só seguir o que está escrito na pagina né? Usar o Odin do PC pra flashear uma room antiga e depois usar o Odin Mobile pra dar root.
Desde já agradeço.
ENG:
Just bought GNOTE in Brazil, but in different carrier (TIM). I wanna know if Dr Ketan´s method avoids the yellow triangle sign after root.
Thx all
Click to expand...
Click to collapse
Pt-BR:
Oi, pode fazer na fé
Funcionou bonito pra mim, depois eu cheguei até a por a rom da vivo devolta nele, roteada dessa vez, mas tô usando aquela da CheckRom agora, recomendo.
Não tenho nenhum triângulo, e o counter tá em NO.
Eng:
( Short version )
Works like a charm.
Hi folks,
I'm in a pinch here. Initially I was in the same scenario as alxbd, but before discovering this useful post I tried to root my Galaxy Note (Brazilian, TIM, N7000UBKL2) using Odin and AbyssNotekernel42CWTouchOriginalLogo.tar as described here: rootgalaxynote.com/galaxy-note-root/how-to-root-galaxy-note-gt-n7000-method-2odinheimdall/. Everything apparently went fine and I did got root access, however when booting into ClockworkMod recovery it keeps blinking and I'm not able to choose any option, also my phone become a bit unstable and I got the infamous yellow triangle too. I uninstalled the CWM using Titanium Backup and replaced it for the ROM Manager available at Play Store but it was unable to backup my original ROM, the first step I would like to take before trying to flash any new ROM.
So, how can I fix this mess?? Can I safely go back to the original state flashing my ROM for this one I found here: hotfile.com/dl/148389052/d9941e2/N7000UBKL2_N7000ZVVKL2_ZVV.zip.html (apparently it's the same as mine) or should I downgrade my ROM first and then flash it for a pre rooted rom? Please help.
Thank you
Hi,
I'm not an expert, but i think you can flash the original ROM with odin or mobile odin without any troubles, but, again, i'm not an expert and never been in the same situation, i had my own "OMFG this **** is bricked" times before, and ODIN saved me...
Regarding the yellow triangle, follow the sticky tread about removing it, this is a JIG http://dx.com/p/unbrick-download-30...959-i9000-i897-m110s-i8700-i9100-93514?item=2 i bought mine in this site.
Hope this help.
Hi alxbd,
I'm relieved, everything is ok now. Initially I gave a shot using odin to flash the rom N7000UBKL2_N7000ZVVKL2_ZVV (Brazilian VIVO). I lost root and CWM but the phone was ok and the yellow triangle was gone (the flash counter remained displaying "1" but I can live with that). Then I received help from Dr.Ketan and followed his invaluable "Dr.Ketan's Guide to Root + ROM update" that I failed to see earlier. Now my GN is rooted and running ICS 4.0.3 (Germany) and I have no fear to flash it again if necessary. =D
Hello!
I had a problem with CWM 6.0.2.5. The system always come back to it or crashed and still reboot to its factory settings. I wanted to remove it. NVflash helped me and now is OK. Unfortunately, Android is still in version 2.2 Froyo because either says that this is the latest version for this phone (LG P990), or when trying to update the error appears. Someone has an idea why this is happening? I've tried all the methods. Smartflash, LG Mobile Support Tool. Nothing works.
I already I have no idea. Actually, I only NVflash method works, and I would like to restore it to a newer version. The most recent. Can, then, has anyone access to NVflash V30 best open (without any branding only normal from LG, without any changes, the original) in Poland? Europe? (This is probably the V30A as I understand from what I read on the internet) I would be extremely grateful because already the second day looking on the internet and nowhere is this version. And if no one has (already quite old phone) although it can V20A version. Maybe then something will work. maybe a normal update.
Please help.
Cześć
Próbowałes wygrywać przez smartflasha z baterią? Ponieważ to może być twój problem przez który nie mogles wgrać przez smartflasha nic
Mam nadzieje że pomogłem
Have You tried smartflash with battery ? This is maybe your problem
Mam taki komunikat:
(Log with error: )
00:00.0 Sec ownload Start...
00:02.0 Sec :We can't communicate with specific port
View attachment 3232379
View attachment 3232378
Próbowałem i bez baterii i z baterią. Niestety to samo.
Dzięki za zainteresowanie.
(I tried without the battery and the battery . Unfortunately, the same error.
Thanks for the reply .)
Wydaje mi się że to wina Windowsa 8 tam zawsze były cyrki z sterownikami
A ty poprostu chce mieć stock 4.0.4? czy jaki?
Bo jak tak to zmień bootloader na nowy (są 2 różne) ty masz stary* wgraj przez cwm stock Roma z jakimiś bajerami i rootem itp
Close
Dziękuję Ci za pomoc. Temat juz zamykam. Sprzedałem ten telefon z systemem jaki był.
Thread to be closed. Phone sold.
Čaute ľudia. Prosím, po flashnutí Odina som zostal na stránke sťahovania a nemôžem sa nikam pohnúť. Chcem sa spýtať, dá sa to opraviť alebo len servisovať?
Preložil GT: Ahoj chlapci. Prosím, po flashnutí Odina som zostal na stránke sťahovania a neviem sa nikam pohnúť. Chcem sa spýtať, dá sa to opraviť alebo len servisovať?
Maybe bit more details:
- state and FW details phone before flashing
- new FW details and source you got it from
- Odin details, version, what files did you use in Odin
- Odin reports during/at and of flashing
Looks like phone is in state it can be flashed again?
OnnoJ said:
Možno trochu podrobnejšie:
- stav a detaily FW telefónu pred blikaním
- nové podrobnosti o FW a zdroj, z ktorého ste ho získali
- Podrobnosti o Odinovi, verzia, aké súbory ste použili v Odine
- Odin hlási počas/pri a blikaní
Zdá sa, že telefón je v stave, že ho možno znova aktivovať?
Click to expand...
Click to collapse
before flashing I had AUJ7 and I put the latest BUKG there. He was from Frija. I have 3.14.4 from here. I used all 4 files (home scs) as they belong ... I run the flash and Fail ends. I use Odin quite often..It never happened to me .. .. and yes, the phone could be blinking
@haydu: this an English forum. Please you translate (e.g. with Google translate before posting.
so the problem is solved.... finnaly a second pc helped....thank you for your interest OnnoJ