hello,
I have a problem guys i was flashing a rom (rom holics) happens to finishing flash, and in the process of restarting the device, I think for hurry I gave ah update.zip and rebooting, the screen stays there with the htc logo in black and restarts and the cycle repeats, could enter the bootloader, but now when I go into recovery at the beginning and who wants to enter (see the logo and lettering recovery) but then again with the white screen logo vibrates and reboots, I can do? by fastboot usb I can do something?
re-flash the recovery?
I ask for your support please
In fastboot, flash the recovery again I recommend wxcrecovery and then flash the ROM again. If you are s-on then you have to fastboot flash the kernel.
Sent from my Holiday using xda premium
Marshmellow92 said:
In fastboot, flash the recovery again I recommend wxcrecovery and then flash the ROM again. If you are s-on then you have to fastboot flash the kernel.
Sent from my Holiday using xda premium
Click to expand...
Click to collapse
I get the following (attached screenshot)
cancha said:
I get the following (attached screenshot)
Click to expand...
Click to collapse
Recovery was written fine. Now you need to reboot to recovery. Instead of
fastboot reboot
do
fastboot reboot recovery
Or just select bootloader on the phone, then select recovery
Now you're in recovery, flash the ROM of your choice. If you're s-on, you'll then need to reboot to fastboot and fastboot flash the boot.img included with the rom
homeslice976 said:
Recovery was written fine. Now you need to reboot to recovery. Instead of
fastboot reboot
do
fastboot reboot recovery
Or just select bootloader on the phone, then select recovery
Now you're in recovery, flash the ROM of your choice. If you're s-on, you'll then need to reboot to fastboot and fastboot flash the boot.img included with the rom
Click to expand...
Click to collapse
If I did that, try to get into recovery, but still I can not access = recovery restarts in white screen and htc logo, I did going into bootloader then recovery, not tried from the console of the pc
In boot loader does it say locked or unlocked?
Edit: try a different recovery
Sent from my Vivid 4G using Tapatalk 2
homeslice976 said:
In boot loader does it say locked or unlocked?
Edit: try a different recovery
Sent from my Vivid 4G using Tapatalk 2
Click to expand...
Click to collapse
says JuopunutBear S-OFF
when I try to load from the image with the following command
fastboot boot recovery.img file-
It's the same goes for the recovery time is then restarted the typical htc logo with white screen
I'm already starting to worry is brick?
cancha said:
when I try to load from the image with the following command
fastboot boot recovery.img file-
It's the same goes for the recovery time is then restarted the typical htc logo with white screen
I'm already starting to worry is brick?
Click to expand...
Click to collapse
If all else fails flash stock recovery, re-lock bootloader, run an RUU ( or flash a PH39IMG.ZIP file ), unlock the bootloader, re-root, flash a custom recovery and restore your phone from a nandroid backup or titanium backup. and all should be well.
camo_flage said:
If all else fails flash stock recovery, re-lock bootloader, run an RUU ( or flash a PH39IMG.ZIP file ), unlock the bootloader, re-root, flash a custom recovery and restore your phone from a nandroid backup or titanium backup. and all should be well.
Click to expand...
Click to collapse
Thanks friend, if I had no need to use the RUU and install the RUU now achieved again the whole process thanks XD
I installed revolution HD 10.3 today. And after installing some applications I did a reboot and now it's stuck in a boot loop.
I have tried to go into CWM recovery, but it only starts to load and reboots directly (Shows the background and version number of CWM). Have tried to flash the CWM recovery again in fastboot but the same result.
Even tried to flash the TWRP recovery, but the same result there. It shows the TWRP logo for 1 sec then it gets rebooted.
Someone have any idees on what I could try to fix this?
In fastboot mode, do these commands:
fastboot erase cache
fastboot flash recovery recovery.img (*recovery.img* according to the name of the recovery you want to flash)
fastboot erase cache
That should work
Sent from my HTC One using xda premium
hardstuffmuc said:
In fastboot mode, do these commands:
fastboot erase cache
fastboot flash recovery recovery.img (*recovery.img* according to the name of the recovery you want to flash)
fastboot erase cache
That should work
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Thanks for your help! Now it boots fine again
Why can't I go into recovery whenever I do this step to install cm11/cm12 roms? I can boot into recovery fine in stock roms using either dual recovery or stock kernel flashed from zips. My fastboot command didn't return any error.
hey people,
I just tried to flash twrp on my z3c.
however I accidentally used something along the lines of
Code:
fastboot flash boot twrp.img
instead of
Code:
fastboot flash recovery twrp.img
can I easily get back to the stock boot image?
the bootloader is unlocked and I can still access fastboot..
cheers!
You can try flash a correct kernel for your device and firmware
Let's call it by "kernel.img", so use the follow command: fastboot flash boot kernel.img
Then you can flash your recovery as you wish
I tried to create a custom boot logo using logo builder 1.6
I followed all the steps as mentioned in the thread for creating a logo.
After renaming logo.bin to logo.img , the next step was given to flash this image using twrp.
So, after flashing I got stuck on boot logo (the loop is the starting venom logo as for the venom kernel )and I cannot access twrp recovery nor can I flash anything using SP flash tool via laptop.
Please help ASAP
Wtf!! No one is replying
Should I ping devs then?
use fastboot
Nicconike said:
Wtf!! No one is replying
Should I ping devs then?
Click to expand...
Click to collapse
use fastboot mode to flash twrp then try to boot in it
download twrp and put it in a folder and open command prompt in it use this command fastboot flash recovery twrp.img
akshay_rajput said:
use fastboot mode to flash twrp then try to boot in it
download twrp and put it in a folder and open command prompt in it use this command fastboot flash recovery twrp.img
Click to expand...
Click to collapse
Thanks for your reply
None of the methods are working because phone was always looping in for bootlogo
But no issues just now I found a way , finally I can retrieve all internal data and clean wipe the ROM yayy!!
Now, i won't be using logo builder ever