Q&A for [ROM][MI3][5.1.1] Opticancro[03/05/15]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][MI3][5.1.1] Opticancro[03/05/15]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
:laugh:Can't wait to flash it
Hi, i am trying to install the extended version but i got the following messages.
minzip: Extracted 4 file(s)
detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
grep: /system/build.prop: No such file or directory
Not backing up files from incompatible version: 12.1
run_program: child exited with status 127
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
blockimg version is 2
erasing 318848 blocks
Patching system image unconditionally...
script aborted: blkdiscard failed: Invalid argument
blkdiscard failed: Invalid argument
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/cm-12.1-20150503-UNOFFICIAL-Opticancro-cancro.zip'
Error flashing zip '/sdcard/cm-12.1-20150503-UNOFFICIAL-Opticancro-cancro.zip'
Updating partition details...
Iata backup size is 0MB, free: 56225MB.
I:Unable to mount '/usbotg'
I:Actual block device: '', current file system: 'vfat'
...done
Click to expand...
Click to collapse
can we extend partition to 1.2gb with the flashable zip available on xda?
any demerits of increasing the partition size?
Can this done if I use twrp?how to partition system1 and system2 if I use twrp this not have dual boot?
this rom is already rooted?
or flash again supersu?
sorry for my english
d'joker said:
can we extend partition to 1.2gb with the flashable zip available on xda?
any demerits of increasing the partition size?
Click to expand...
Click to collapse
Yes you can do it but not necessary for this rom.
With extended system1 you'll lose ability to dual boot (dual boot not recommended by the way), and normally you lose ability to use MiFlash to clean flash MIUI on your phone if something went wrong.
jaliee85 said:
Can this done if I use twrp?how to partition system1 and system2 if I use twrp this not have dual boot?
Click to expand...
Click to collapse
Yes you can flash this rom using TWRP. With stock partition layout go to download "stock".No TWRP is not supporting dualboot, it only detects system1.
By the way I don't understand what you mean by "how to partition system1 and system2. Do you mean format them or resize them?
husen96 said:
this rom is already rooted?
or flash again supersu?
sorry for my english
Click to expand...
Click to collapse
Yes this rom include root, you won't need to flash supersu.zip. In order to enable root in /settings/about this phone fast press multiple time build number.
That'll enable devloper options, in devloper options (settings) enable root access.
I got this error when i flash extended version using twrp.i already extend my partition using in the post method...pls i need this solution
Code:
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:operation_start: 'Flashing'
Installing '/sdcard/Download/cm-12.1-20150503-UNOFFICIAL-Opticancro-cancro.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
minzip: Extracted 4 file(s)
detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
Not backing up files from incompatible version: 12.1
run_program: child exited with status 127
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
blockimg version is 2
Patching system image unconditionally... erasing 318848 blocks
script aborted: blkdiscard failed: Invalid argument
blkdiscard failed: Invalid argument
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/Download/cm-12.1-20150503-UNOFFICIAL-Opticancro-cancro.zip'
Error flashing zip '/sdcard/Download/cm-12.1-20150503-UNOFFICIAL-Opticancro-cancro.zip'
Updating partition details...
I:Data backup size is 1216MB, free: 5906MB.
I:Unable to mount '/usbotg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
I:operation_end - status=1
Hi
What is the diferent between stock and Extended?
adsim said:
Hi
What is the diferent between stock and Extended?
Click to expand...
Click to collapse
Stock is made for flashing on stock system partition layout (system1 and system2 both ~640Mb)
Extended is made for flashing on resized partition system : system1 = 1.2Gb and system2 = 5Mb
Edit : @jaliee85 sorry but I don't know from where it may come.
If you made manual repartition just try to flash CWM and flash repartition script made by audahadi (second or third thread page about repartitioning)
having error issues with status 7
hi,
sorry for this if this question already been answer before.
i having the error with status 7
i tried many times to install the rom through CWM.
and i tried to change the binary script and still the same.
anyone of here face this problem before?
is there any solution for this?
thanks for advanced.
Riichard63 said:
Stock is made for flashing on stock system partition layout (system1 and system2 both ~640Mb)
Extended is made for flashing on resized partition system : system1 = 1.2Gb and system2 = 5Mb
Edit : @jaliee85 sorry but I don't know from where it may come.
If you made manual repartition just try to flash CWM and flash repartition script made by audahadi (second or third thread page about repartitioning)
Click to expand...
Click to collapse
Thank yous.
My device made manual repartition to system1 = 1.0Gb and system2 = 1.0Gb. Is OK?
Has anyone tried the extended version? It is work?is there any problem with the .zip ?
jaliee85 said:
I got this error when i flash extended version using twrp.i already extend my partition using in the post method...pls i need this solution
Code:
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:operation_start: 'Flashing'
Installing '/sdcard/Download/cm-12.1-20150503-UNOFFICIAL-Opticancro-cancro.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
minzip: Extracted 4 file(s)
detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
Not backing up files from incompatible version: 12.1
run_program: child exited with status 127
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
blockimg version is 2
Patching system image unconditionally... erasing 318848 blocks
script aborted: blkdiscard failed: Invalid argument
blkdiscard failed: Invalid argument
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/Download/cm-12.1-20150503-UNOFFICIAL-Opticancro-cancro.zip'
Error flashing zip '/sdcard/Download/cm-12.1-20150503-UNOFFICIAL-Opticancro-cancro.zip'
Updating partition details...
I:Data backup size is 1216MB, free: 5906MB.
I:Unable to mount '/usbotg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
I:operation_end - status=1
Click to expand...
Click to collapse
i had the exact same error.
i solve it by install CWM and resize both my partitions (system1, system2) back to default size and then install the stock rom instead of extended.
Cant restore from titanium.
YES
d'joker said:
can we extend partition to 1.2gb with the flashable zip available on xda?
any demerits of increasing the partition size?
Click to expand...
Click to collapse
yes we can. i myself extended to 1.2GB one via a flashable zip.
---------- Post added at 02:58 AM ---------- Previous post was at 02:54 AM ----------
wonderboys said:
hi,
sorry for this if this question already been answer before.
i having the error with status 7
i tried many times to install the rom through CWM.
and i tried to change the binary script and still the same.
anyone of here face this problem before?
is there any solution for this?
thanks for advanced.
Click to expand...
Click to collapse
diable stock partitions and make extended partition of 1.2GB.
heating issue
Battery drain and heating issue.
Why mi band operates differently when unlocking miui or non miui ROM ?
Previously on mi3 when i was using miui phone could only be unlocked if band was in approximately 1 metre radius but now phone unlocks from 7-8 metres too(normal Bluetooth range)
I used to boast my friends by handing then my mi3 and ask then to unlock and when they encountered Patten lock, I would approach the phone and the moment i grabbed it, it got unlocked.
But note this doesn't happens
Apart from this boasting, it is really very unsafe and USELESS smart lock it it has this much big operating radius.
will there be OTA updates?
BigFatTony said:
will there be OTA updates?
Click to expand...
Click to collapse
it will be too much to ask for OTA updates, we have bigger issues to solve first like camera, ambient display etc.
having problem installing it..need a little help.. this is the error executing updater binary in zip
Related
Q&A for [ROM][5.0.2][TITAN]RESURRECTION REMIX_lp[WIP][CM12]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][TITAN]RESURRECTION REMIX_lp[WIP][CM12]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
found a small problem when playing videos, they reproduce in slow motion most of the time .. sorry my English, I am Brazilian ..
Rom is very nice, smooth and fast, great work!
Please put option to select Sim1 and Sim2 ringtones separately like BlissPop Rom
How to disable bold font on settings?
Sent from my Moto G 2014 using XDA Free mobile app
UI crashing on last REsurrection ROM Update
The UI is crashing when I change the phone position from vertical to horizontal on gallery and other apps.
I am talking about the last ROM update Resurrection Remix Lollipop 5.0.2 - v5.3.8
ROM 5.3.8, clean Flash
Swipe-Gesture doesn't work on AOSP-Keyboard
A:http://forum.cyanogenmod.org/topic/103962-no-gesture-typing-in-aosp-keyboard/
TheSword75 said:
The UI is crashing when I change the phone position from vertical to horizontal on gallery and other apps.
I am talking about the last ROM update Resurrection Remix Lollipop 5.0.2 - v5.3.8
Click to expand...
Click to collapse
I have also noticed.
Restart
Včera 2x při volání
Restart when calling 3x, 1x changing
wallpaper
heyy wen i flash this rom in TWRP
it shows an error to me nd shows failed
please help me how to install this rom
Last two builds fail when trying to flash? I'm on xt64/TWRP.
Sent from my Moto G 2014 using XDA Premium 4 mobile app
cant flash it...(
Hey @varund7726 bhai. First of all thnx work bringing RR for moto g the problem is i tried flashing it after clearing dalvik, data, system and cache but the status said failed.......i m using xt1068, twrp 2.8.5.0 also providing you the log.....
Iperation_start: 'Flashing'
Installing '/sdcard1/cm-Resurrection_Remix_LP_v5.3.9-20150320-titan.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
script aborted: This package supports bootloader(s): 0x4882; this device has bootloader 0x4807.
This package supports bootloader(s): 0x4882; this device has bootloader 0x4807.
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard1/cm-Resurrection_Remix_LP_v5.3.9-20150320-titan.zip'
Error flashing zip '/sdcard1/cm-Resurrection_Remix_LP_v5.3.9-20150320-titan.zip'
Updating partition details...
Iata backup size is 0MB, free: 6066MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
Iperation_end - status=1
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log
lolsinnerlol said:
Hey @varund7726 bhai. First of all thnx work bringing RR for moto g the problem is i tried flashing it after clearing dalvik, data, system and cache but the status said failed.......i m using xt1068, twrp 2.8.5.0 also providing you the log.....
Iperation_start: 'Flashing'
Installing '/sdcard1/cm-Resurrection_Remix_LP_v5.3.9-20150320-titan.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
script aborted: This package supports bootloader(s): 0x4882; this device has bootloader 0x4807.
This package supports bootloader(s): 0x4882; this device has bootloader 0x4807.
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard1/cm-Resurrection_Remix_LP_v5.3.9-20150320-titan.zip'
Error flashing zip '/sdcard1/cm-Resurrection_Remix_LP_v5.3.9-20150320-titan.zip'
Updating partition details...
Iata backup size is 0MB, free: 6066MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
Iperation_end - status=1
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log
Click to expand...
Click to collapse
Here's your error
This package supports bootloader(s): 0x4882; this device has bootloader 0x4807.
This package supports bootloader(s): 0x4882; this device has bootloader 0x4807.
Upgrade your bootloader to lollipop
One Question... Is in the new 5.1 Build Dual Sim full functionelly on my XT1068?
1) Can someone help me and explain what this vertical white line on the top of my lock screen is? Only appears when locking the phone. See attached screenshot.
ronnycoleman said:
1) Can someone help me and explain what this vertical white line on the top of my lock screen is? Only appears when locking the phone. See attachment.
Click to expand...
Click to collapse
most likely the carrier label with no carrier name so it's just the separator there
HouseBreaker said:
most likely the carrier label with no carrier name so it's just the separator there
Click to expand...
Click to collapse
Ah thanks. Seems the sim card somehow wasn't unlocked. After rebooting I entered my pin and the carrier name appeared.
But is there a chance to deactivate the info for a (missing/not inserted) 2nd sim card on the lock screen?
Hey, excelent rom and work, loving 5.1 with this custom.
Just one bug I have found and searched for without results: Music app FC when playing anything. I clean flashed and everything else is working fine (xt1068). Has someone faced this bug?
---------- Post added at 06:51 PM ---------- Previous post was at 06:40 PM ----------
ronnycoleman said:
Ah thanks. Seems the sim card somehow wasn't unlocked. After rebooting I entered my pin and the carrier name appeared.
But is there a chance to deactivate the info for a (missing/not inserted) 2nd sim card on the lock screen?
Click to expand...
Click to collapse
Yeah, that bar its annoying, but there is no mod for disabling it in settings
BTW, I see on your screenshot you have the same bug as me: Double network icons. This shouldnt happen, one should be there and the other one should be an unused SIM icon that actually can be hidden (on Configurations/UI/StatusBar/Show empty SIM icons). Dont confound, this last setting doesnt change the lockscreen bar you are talking about, I was just describing the two icons bug
Jeees! Best rom eva! Thx
Also I noticed that some apps are crashing sometimes when minimizing (using back/return navigation button)...never happened on stock rom. I think I'll have to collect the crash logs then..
After waiting a bit for updating my XT1068 in order for xposed to stabilize a little, dispose a bit of time to do things calmly and such, today I tried to apply the OTA update my phone was suggesting me since several weeks ago.
My device is rooted, has TWRP recovery, xposed, stock rom of KK. However when updating to 5.0 on recovery something fails with this error:
Code:
I:Inserting 'install /cache/Blur_Version.21.11.23.titan_retaildsds.retaildsdsall.en.03.zip'
I:Copying file /cache/recovery/log to /cache/recovery/last_log
tw_get_context got selinux context: u:object_r:fuse:s0
I:Got default contexts and file mode for storage files.
I:Attempt to load settings from settings file...
I:Loading settings from '/data/media/0/TWRP/.twrps'.
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/ZX1D22BGJ8'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:TWFunc::Fixup_Time: Pre-fix date and time: 2015-03-12--07-40-09
I:TWFunc::Fixup_Time: Setting time offset from file /sys/class/rtc/rtc0/since_epoch
I:TWFunc::Fixup_Time: Date and time corrected: 2015-03-12--07-40-10
I:Switching packages (TWRP)
I:Set page: 'action_page'
I:operation_start: 'OpenRecoveryScript'
Processing AOSP recovery commands...
I:command is: 'install'
I:value is: '/cache/Blur_Version.21.11.23.titan_retaildsds.retaildsdsall.en.03.zip'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
Installing '/cache/Blur_Version.21.11.23.titan_retaildsds.retaildsdsall.en.03.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
installing gptupgrade updater extensions
file_contexts path is present in /tmp/file_contexts
mount point :/system location: /dev/block/platform/msm_sdcc.1/by-name/system , file system type :ext4script aborted: Package expects build fingerprint of motorola/titan_retaildsds/titan_umtsds:4.4.4/KXB21.85-23/19:user/release-keys or motorola/titan_retaildsds/titan_umtsds:5.0.2/LXB22.46-28/28:user/release-keys; this device has Motorola/omni_titan/titan:5.0.2/LRX22G/f5a9f2c204:eng/test-keys.
Package expects build fingerprint of motorola/titan_retaildsds/titan_umtsds:4.4.4/KXB21.85-23/19:user/release-keys or motorola/titan_retaildsds/titan_umtsds:5.0.2/LXB22.46-28/28:user/release-keys; this device has Motorola/omni_titan/titan:5.0.2/LRX22G/f5a9f2c204:eng/test-keys.
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/cache/Blur_Version.21.11.23.titan_retaildsds.retaildsdsall.en.03.zip'
E:Error installing zip file '/cache/Blur_Version.21.11.23.titan_retaildsds.retaildsdsall.en.03.zip'
Done processing script file
In what comes to android internals like this I'm more like a plain user than anything else. So far seems that something on the release keys of my phone isn't what the update zip or whatever expects, or that's what I've figured up so far.
Now, what can I do in order to update to 5.0? Do I look for a 5.0 stock rom and flash on top or do I have to change some config / file on my device?
If the thing comes to flashing, are stable enough the non-stock Lollipop roms around here to be used daily?
Thank you all in advance. Hoping that I've asked properly.
You cant do an OTA update from Motorola with a rooted phone. See this thread and read all the posts http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682
Yeah, that makes sense. Thank you.
Hi all,
I got error blkdiscard failed invalid argument while flashing [ROM][MI3/Mi4][CM-12.1][Android-5.1.1]CM-Cancro.
Many said that I had to extend partition to 1.2GB, which I already did. I can install Temasek rom with extended
partition, but failed with Bitti09 rom.
Here is what I have did before
-flash r11 cwm
-manually extend partition
-script extend partition
-flash TWRP
all step above failed to install [ROM][MI3/Mi4][CM-12.1][Android-5.1.1]CM-Cancro.
Now running with audahadi Temasek rom.
Here is my log from TWRP
PHP:
Installing '/sdcard/Custom_rom/cm-12.1-20150613-UNOFFICIAL-mi3-cancro.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
minzip: Extracted 4 file(s)
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
Patching system image unconditionally...blockimg version is 2
erasing 318848 blocks
script aborted: blkdiscard failed: Invalid argument
blkdiscard failed: Invalid argument
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/Custom_rom/cm-12.1-20150613-UNOFFICIAL-mi3-cancro.zip'
Error flashing zip '/sdcard/Custom_rom/cm-12.1-20150613-UNOFFICIAL-mi3-cancro.zip'
Updating partition details...
Please help...
Finally I have solved this problem. Yes "blkdiscard failed: Invalid argument" is error of unsuitable partition space to install a rom.
Initially my partition was like this
system = 1242 MB (1.2GB)
system1= 100 MB
After google and reading most comment from partition thread, I found out there is three version of system partition size which is 730MB, 1242MB and 1337 MB.
I found that @audahadi partition script use
system = 1337 MB
system1= 5MB
Quote:
Originally Posted by audahadi
This Procedure May Will Brick Your Device!!!!!
Only for users who comfort with single partition layout only !!!
This is a script to partiton your system partition as like stated in OP. Tested with Clockworkmod recovery.
How to use? Just flash through recovery on either partition. Remember, this will wipe your system partition, do backup for safe or no if you like to live dangerously.
Repartition_MI3W_1_2GB.zip
Credit :
http://forum.xda-developers.com/show....php?t=2765846
http://forum.xda-developers.com/gala...-data-t2762594
Click to expand...
Click to collapse
So using that script, i have succeed install CM based rom.
sorry but could you please elaborate!! I don't get it.. how could I see my partitions?! and how can I change them?!
sorry for being noob.
Go to google play and install Disc Info app. You can see your partition
Sent from my MI 3W using XDA Forums
Can you give me the link for system = 1337 MB
system1= 5MB partition?
Here you go
http://forum.xda-developers.com/attachment.php?attachmentid=3321267&d=1432050198
Sent from my MI 3W using XDA Forums
Q&A for [ROM][5.1.1][BLISSPOP][OFFICIAL][CANCRO]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.1.1][BLISSPOP][OFFICIAL][CANCRO]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Error installing ROMs
Hi all,
I got error blkdiscard failed invalid argument while flashing [ROM][5.1.1][BLISSPOP][OFFICIAL][CANCRO]
Many said that I had to extend partition to 1.2GB, which I already did.
Here is what I have did before
-[ROM][5.1.1][CANCRO UNOFFICIAL] Resurrection Remix LP
-script extend partition
-flash TWRP
all step above failed to install[ROM][5.1.1][BLISSPOP][OFFICIAL][CANCRO] and also
[ROM][5.1.1][UNOFFICIAL] GZR Validus ROM V8.0 [R2,2015-06-09]
Here is my log from TWRP
PHP Code:
Installing '/sdcard/Custom_rom/[ROM][5.1.1][BLISSPOP][OFFICIAL][CANCRO]
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
minzip: Extracted 4 file(s)
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
Patching system image unconditionally...blockimg version is 2
erasing 318848 blocks
script aborted: blkdiscard failed: Invalid argument
blkdiscard failed: Invalid argument
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/[ROM][5.1.1][BLISSPOP][OFFICIAL][CANCRO]
Error flashing zip '/sdcard/[ROM][5.1.1][BLISSPOP][OFFICIAL][CANCRO]
Updating partition details...
when i want to get the logcat on my mi4...
i got this tips "Unable to open log device 'main'" , is this a bug?
when will the new build come without sod ?
or if i install the current build and dont use ambient display will it solve the sod issue?
Thanks! Works fine
But lockscreen rotates even when "lockscreen" rotation is disabled
Can't install
Am on stock partition I can't install it and it gv me error status 7 plz can u say solution
please help me!!! I'm flashing the ROM is fail . E:Error executing updater binary in zip '/sdcard/XXXX.zip. My Device: Xiaomi mi4 .:crying::crying::crying:
Plz help
zip not installed. twrp shows error executing updater binary installation aborted. plzzz helppp!!!
Flashed .. Working super cool...
Experiencing awesome customization... Kudos..
Really need camera app .. No camera app .. Tried google camera error says can't connect to the camera.. And FM app...
Do pleas help to flash these two apps
---------- Post added at 10:44 PM ---------- Previous post was at 10:40 PM ----------
sumitk3 said:
zip not installed. twrp shows error executing updater binary installation aborted. plzzz helppp!!!
Click to expand...
Click to collapse
Problem is because of partition
Hey guys you just need to flash extended partition script or modify partition through adb... You can find it in XDA forum...
Error flashing, HELP!!
Hi, I had the 2.2 version installed, I installed other ROM and when I try to flash the new Blisspop 3.5v with CMW in my Mi 4, I have an error (Status 7) or (Status 6). I tried to change the boot.img for other one than works, but it does not flash... Anyone knows why this happens?
Apology for my english :///
Heeeeelp!!!
I can't flash? Have i got to format system 2 or delete it? Pls I need an answer (((((
sergio_gnzlz said:
I can't flash? Have i got to format system 2 or delete it? Pls I need an answer (((((
Click to expand...
Click to collapse
Have you repartitioned it to 1.2 GB it wont install on stock partition. If you dont know how to repartition search on miui forum there zip files are provided
---------- Post added at 11:04 AM ---------- Previous post was at 10:47 AM ----------
Using this rom from 2 days, highly customizable, stable rom, slightly sluggish as compared to ivans but in day to day use u wont even notice. Can be used as daily driver if you dont bother about following issues
Few concerns need to be adressed-
1. Battery drain is faster than other roms. was expected as it is CM based rom and I have made lot of customizations but hey, more the merrier....
2. Camera app- Must needed as not a single app works
3. Mobile network issue- Reboot results in no network or no sim card error- workaround is mentioned in other posts- Airplane mode-ON, reboot, turn airplane mode OFF. Not sure if during sleep the phone results in not reachable to the caller.
4. Not sure about X-posed framework- can anyone update if this rom supports Xposed and Xmod games
5. Quick setting panel/notification panel dropdown is must on lockscreen and with torch support (I guess if you fix camera, torch will also work)
Thankfully no SOD or call bug in latest release of 24th June
Will wait for another 3-4 days if no update to above issues will shift to omni or CM12.1 temasek
Camera still not working
Hi Jackeagle,
Camera issue is still there even in the latest July versions also. Please do something. We love your rom
Error executing install script in BlissPop-v3.6-cancro-OFFICIAL-20150708-1540
Hi,
I have just tried to install your ROM on my cancro device. I followed all the steps.
However, everytime I try to flash the ZIP through TWRP, I get a message in red, saying that there wasn and error executing install script in BlissPop-v3.6-cancro-OFFICIAL-20150708-1540
And the flash fails. What am I doing wrong ?
Here's the log:
Set page: 'flash_confirm'
I:Set page: 'flash_zip'
Iperation_start: 'Flashing'
Installing '/sdcard/BlissPop-v3.6-cancro-OFFICIAL-20150708-1540.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
minzip: Extracted 4 file(s)
******************************************
* BlissPop Rom
******************************************
* Created By TeamBliss
******************************************
* Build date: Wed Jul 8 15:42:18 PDT 2015
* Device: MI 3W (cancro)
******************************************
{*} Running backup scripts...
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
grep: /system/build.prop: No such file or directory
Not backing up files from incompatible version: 3
run_program: child exited with status 127
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
{*} Done.
blockimg version is 2
erasing 318848 blocks
{*} Following operation takes time, please wait...
{*} Installation is block based
Patching system image unconditionally...
script aborted: blkdiscard failed: Invalid argument
blkdiscard failed: Invalid argument
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/BlissPop-v3.6-cancro-OFFICIAL-20150708-1540.zip'
Error flashing zip '/sdcard/BlissPop-v3.6-cancro-OFFICIAL-20150708-1540.zip'
Updating partition details...
Iata backup size is 0MB, free: 11416MB.
I:Unable to mount '/usbotg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
Iperation_end - status=1
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'settings'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
Iperation_start: 'Flashing'
Installing '/sdcard/BlissPop-v3.6-cancro-OFFICIAL-20150708-1540.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Verifying zip signature...
I:read key e=3 hash=20
I:read key e=65537 hash=20
I:read key e=65537 hash=20
I:read key e=65537 hash=20
I:4 key(s) loaded from /res/keys
I:comment is 1738 bytes; signature 1720 bytes from end
I:whole-file signature verified against RSA key 0
Zip signature verified successfully.
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
minzip: Extracted 4 file(s)
******************************************
* BlissPop Rom
******************************************
* Created By TeamBliss
******************************************
* Build date: Wed Jul 8 15:42:18 PDT 2015
* Device: MI 3W (cancro)
******************************************
{*} Running backup scripts...
detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
grep: /system/build.prop: No such file or directory
Not backing up files from incompatible version: 3
run_program: child exited with status 127
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
{*} Done.
blockimg version is 2
erasing 318848 blocks
{*} Following operation takes time, please wait...
{*} Installation is block based
Patching system image unconditionally...
script aborted: blkdiscard failed: Invalid argument
blkdiscard failed: Invalid argument
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/BlissPop-v3.6-cancro-OFFICIAL-20150708-1540.zip'
Error flashing zip '/sdcard/BlissPop-v3.6-cancro-OFFICIAL-20150708-1540.zip'
Updating partition details...
Iata backup size is 0MB, free: 11416MB.
I:Unable to mount '/usbotg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
Iperation_end - status=1
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'settings'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log
I have took and ported miui 7 for htc one sprint varient from the m8 ,but having bootloop issues I know its the boot.IMG but not sure what it can be. If anyone know how to fix please reply so I can post the ROM up
Please post logcat
did you modify bootclasspath as well to include miui specific files
smokin901 said:
Please post logcat
did you modify bootclasspath as well to include miui specific files
Click to expand...
Click to collapse
Logcat from recovery or from adb, everything installs through recovery , I used the miui v7 for m8 and used miui v5 for m7spr for base
miko12312 said:
Logcat from recovery or from adb, everything installs through recovery , I used the miui v7 for m8 and used miui v5 for m7spr for base
Click to expand...
Click to collapse
logcat from adb
is the m8 rom kitkat based or lollipop
smokin901 said:
logcat from adb
is the m8 rom kitkat based or lollipop
Click to expand...
Click to collapse
Ok will upload later today barely restored my pc need to install adb and other files, but both roms are based on kikat 4.4 , I used a forum to port which I will post as well when I post log cat ,but I think the m8 version is gsm not cdma support , I will also post original roms links
http://en.miui.com/download-252.html
That's the m8 miui v7
http://en.miui.com/download-253.html
That's m7 miui v5 for Sprint I used v5.6.5
http://forum.xda-developers.com/showthread.php?t=3250984
Port guide used ,I used the port from other device tutorial close to the end
ok looks like cm based rom which kernel are you using
and what about logcat?
smokin901 said:
ok looks like cm based rom which kernel are you using
and what about logcat?
Click to expand...
Click to collapse
Used stock kernel I think , which ever one is in the m7spr 5.6.5 version, and will have a logcat by tonight
miko12312 said:
Used stock kernel I think , which ever one is in the m7spr 5.6.5 version, and will have a logcat by tonight
Click to expand...
Click to collapse
you have to modify ramdisk
smokin901 said:
you have to modify ramdisk
Click to expand...
Click to collapse
How can I do that
ok re did everything , also edited the boot.img according to the port guide
this is the logcat on boot
This came up during flash in recovery ,looks like somewhere in the system something is wrong ,is it with the carrier settings since its coming from a gsm m8 rom
Installing '/sdcard/m7.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/userdata at /data: Device or resource busy
Formatting system...
unmount of /system failed; no such volume
Creating filesystem with parameters:
Size: 1946152960
Block size: 4096
Blocks per group: 32768
Inodes per group: 7920
Inode size: 256
Journal blocks: 7423
Label:
Blocks: 475135
Block groups: 15
Reserved block group size: 119
Created filesystem with 11/118800 inodes and 15607/475135 blocks
Installing system files...
minzip: Extracted 2099 file(s)
Creating system links...
Set permission...
Update Boot image...
minzip: Extracted 18 file(s)
about to run program [/tmp/relink] with 1 args
[RELINK] Can't get right region or carrier, assign with default value
script succeeded: result was [/system]I:Legacy property environment disabled.
Updating partition details...
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
Iata backup size is 72MB, free: 6925MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'auto'
...done
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
I:Set page: 'flash_done'
Iperation_end - status=0
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log
miko12312 said:
This came up during flash in recovery ,looks like somewhere in the system something is wrong ,is it with the carrier settings since its coming from a gsm m8 rom
Installing '/sdcard/m7.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/userdata at /data: Device or resource busy
Formatting system...
unmount of /system failed; no such volume
Creating filesystem with parameters:
Size: 1946152960
Block size: 4096
Blocks per group: 32768
Inodes per group: 7920
Inode size: 256
Journal blocks: 7423
Label:
Blocks: 475135
Block groups: 15
Reserved block group size: 119
Created filesystem with 11/118800 inodes and 15607/475135 blocks
Installing system files...
minzip: Extracted 2099 file(s)
Creating system links...
Set permission...
Update Boot image...
minzip: Extracted 18 file(s)
about to run program [/tmp/relink] with 1 args
[RELINK] Can't get right region or carrier, assign with default value
script succeeded: result was [/system]I:Legacy property environment disabled.
Updating partition details...
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
Iata backup size is 72MB, free: 6925MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'auto'
...done
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
I:Set page: 'flash_done'
Iperation_end - status=0
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log
Click to expand...
Click to collapse
Looks like there are some issues with your updater-script..Re-check your updater-script with the one I uploaded on my thread. Also according to your log, there are some issues with wake lock releasing and dex-opting miui framework files due to damaged classes.dex..Look into that too..Re-modify your boot.img.
STRYDER~007 said:
Looks like there are some issues with your updater-script..Re-check your updater-script with the one I uploaded on my thread. Also according to your log, there are some issues with wake lock releasing and dex-opting miui framework files due to damaged classes.dex..Look into that too..Re-modify your boot.img.
Click to expand...
Click to collapse
Not really sure how to check those ,and the updater-script I had checked but I am using a gsm to cdma type port, I will be uploading the Rom later tonight maybe you could take a look at it
Also is it possible to port to lollipop
http://forum.xda-developers.com/showthread.php?t=3280327
miko12312 said:
http://forum.xda-developers.com/showthread.php?t=3280327
Click to expand...
Click to collapse
You'd be way better off starting from scratch and actually compiling for Sprint M7 using the Miui Patchrom repository.
Trying to port this over from the M8 will be an endless battle of issues if it ever even works at all.
Not trying to sound harsh at all, just hate to see anyone waste time on something like this.
There are also other GSM M7 Miui builds you could try and port from, if Patchrom is out of your scope, rather then using an M8 base.
Second one listed on this page is Miui v7 despite being labeled as v6.
santod040 said:
You'd be way better off starting from scratch and actually compiling for Sprint M7 using the Miui Patchrom repository.
Trying to port this over from the M8 will be an endless battle of issues if it ever even works at all.
Not trying to sound harsh at all, just hate to see anyone waste time on something like this.
There are also other GSM M7 Miui builds you could try and port from, if Patchrom is out of your scope, rather then using an M8 base.
Click to expand...
Click to collapse
Thought about doing from source, but haven't tried it yet, just wanted to see if I could do it quicker, and there is a gsm m7 build of miui but its v6 , I haven't seen or find any for v7 , when I get time later in the week ill start checking more on how to do it , I have looked at patchrom but it looks like scripts to edit the system but still a little confused ,there is a guide, also will have to see how to add sprint support but will be later on , getting my screen replacement for nexus 7 2012 tommorrow so that will be my main device , but anyone willing to edit ,fix , run the Rom I uploaded is accessible to anyone
miko12312 said:
Thought about doing from source, but haven't tried it yet, just wanted to see if I could do it quicker, and there is a gsm m7 build of miui but its v6 , I haven't seen or find any for v7 , when I get time later in the week ill start checking more on how to do it , I have looked at patchrom but it looks like scripts to edit the system but still a little confused ,there is a guide, also will have to see how to add sprint support but will be later on , getting my screen replacement for nexus 7 2012 tommorrow so that will be my main device , but anyone willing to edit ,fix , run the Rom I uploaded is accessible to anyone
Click to expand...
Click to collapse
May want to re-read my post above, as I was still editing it when you started your reply.
V7 already exists, see my link above and description....