Hey All,
I have 16gb Samsung s advance,
when i bought the mobile, i had no clue about updates and resets,
Then i researched and learned alot about the android development,
i updated my 2.3.6 to 4.1.2 then to 4.4.2 Carbon mode then to 4.4.4 Cynagomod ,
Then it gave me wifi issues to i decided to flash it back to 2.3.6
and i accidently used 8gb pit file,
& the memory shrunked to 3.97 GB,
i tried using 16GB pit file with the same reset files ,
but it gave errors when its was first booting up in the copying files linux part,
and i thought it had some error in firmware,
then i tried to flash same 16GB pit file with original JB 4.1.2 firmware,
then it gave unavailable storage device memory, & unavailable memory card,
tell me a solution on how to get my device back on 16 GB pit file,
give me a full tutorial
Thanks in advance
well that is awkward for s advance
DaniyalShabbir said:
Hey All,
I have 16gb Samsung s advance,
when i bought the mobile, i had no clue about updates and resets,
Then i researched and learned alot about the android development,
i updated my 2.3.6 to 4.1.2 then to 4.4.2 Carbon mode then to 4.4.4 C
Thanks in advance
Click to expand...
Click to collapse
well booting up original JB with PIT file should solve the problem also the stock rom has all data . files including PIT , CSC n all .. still youu can add PIT file in other option . that should do the trick i messed my partitions n did something like you did , but i managed to flash STOCK n PIT through odin. try checking the PIT file again .:good:
DaniyalShabbir said:
give me a full tutorial
Thanks in advance
Click to expand...
Click to collapse
Follow this guide/tutorial: How to Downgrade JB 4.1.2 to GB 2.3.6 on Galaxy S Advance(16gb and 8gb)<works 100%
And read carefully before doing anything to your device.
Good luck
Related
am sry if this is a repost i actually searched but couldn't find a post ,
well i flashed my galaxy tab with gingerbread 2.3 everything seems fine but the only problem is that the internal sd card memory just shrinked to 209 mb instead of 16 gb plz any help would be appreciated
Let's see if I can help you, but first can you provide more details on what actual version of GB you flashed and how you flashed it (ODIN or official signed zip)?
first of all i tried the honeycomb by spacemoose1 and after the reboot just got a blank screen so i then flashed this file P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar with P1_EUR.pit as pit file which should have gave me the gingerbread and it does but the 16gb just shrinked to 209 mb
from where u got this pit file ? is not for this rom and for ginger
u need to flash stock froyo with pit to solve this bloody issue and then pleas use one of samfirmware.com gb roms without pit file as inside the tar "rom" there is pit file
chhers
Sort of what I was going to suggest...
Sent from my GT-P1000 using XDA App
thanks bro for ur advice , but all am confused of now is finding the right froyo stock rom with compatible pit file , cuz don't wanna loose my tab for another foolish trial , may u help me on this , and thanks in advance
i got this link hxxp://droidangel.blogspot.com/2011/05/all-samsung-galaxy-tab-froyo-22-and.html[/url] but it has a lot of versions and firmwares am i supposed to choose one of them if yes , according to what am i supposed to shoose it ?or just anyone of them will work ?
i think that P1000JPJis wat i need since am in arabic region, will it b fine to flash this version of froyo ?
Personnally I would go for the P1000XWJJ7 (not the NEW) which appears to actually be JJ5. I found that Kies actually recognized this as a valid version.
Sent from my GT-P1000 using XDA App
so u prefer that i go for the P1000DDJJ5 P1.PIT Version 2.2 October 2010 ?
is this wat u meant by (not the NEW)?
On the list from the link that you sent there are two XWJJ7 roms - I recommend the 1st one; I've tried them all and this was the best one with an unlocked bootloader.
Sent from my GT-P1000 using XDA App
ok after i get the rom what is the best way to flash it ?
open odin, load it in the pda area , check repartition and hit start , after finishing wipe the cache and do hard reset from the recovery mode , that's it ? don't i need to load a certain pit file ,
also i've been told that pit file is used to repartition the internal memory of the tab so wondered if there a certain pit file that can repartition my tab
Yes, except that you should use the associated PIT (P1_add_hidden ) file for that rom as that was probably what went wrong last time - the internal memory wasn't partitioned correctly for the GB release.
did the whole process as k0sh said still the same problem ,the firmware is working perfectly and smooth btw i realized the device memory (1.19gb ) is intact and working all the problem in the USB storage memory instead of being12.8 gb it is 209 mb
Did you flash a stock Froyo release together with the associaated PIT file and with Re-Partition ticked, using Odin3 v1.70?
Sent from my GT-P1000 using XDA App
ya i did exactly what u r saying but unfortunately still 209 mb :S:S
Mmmm.... my next step then would be try and flash a safe stock gingerbread rom as provided by the Overcome development team. Don't flash the overcome rom itself (unless you want too) but just flash the safe stock GB to see if it returns your onboard SD memory.
Sent from my GT-P1000 using XDA App
and that's exactly what i did and it solved the whole sh*t , thanx man for helping throughout this issue, and of course thanx to the overcome team for such rom
Glad to hear it, enjoy.
hi everyone i am new to this..so i downloaded the new chinese ics leaked with out backing up my original samsung ginger bread stock...how in the hell can i go back that if its possible ..because this chinese leaked doesn't have android market and the gallery always crash ..thank you all in advance..cheers
robertkuro said:
hi everyone i am new to this..so i downloaded the new chinese ics leaked with out backing up my original samsung ginger bread stock...how in the hell can i go back that if its possible ..because this chinese leaked doesn't have android market and the gallery always crash ..thank you all in advance..cheers
Click to expand...
Click to collapse
Did you bother to search... you didn't even read the first post in the chinese ics thread.
Sent from my GT-I9220 using xda premium
Moved To Q&A
Please post all questions in the Q&A section
robertkuro said:
hi everyone i am new to this..so i downloaded the new chinese ics leaked with out backing up my original samsung ginger bread stock...how in the hell can i go back that if its possible ..because this chinese leaked doesn't have android market and the gallery always crash ..thank you all in advance..cheers
Click to expand...
Click to collapse
Find N7000 All stock ROm link from my signature, n go with any ROM you like.
Keep in mind, if you want to keep rooted, just select older ROM
the problem i am having now is its not even rebooting and i am having a firmware upgraded encountered an issue and i cant get into recovery mode the only thing i can get into is download mode and when i try to install the custom rom..you provided it says end on odin and when i try to install the leak ics it stays on hidden for hours..is my phone doomed..
robertkuro said:
the problem i am having now is its not even rebooting and i am having a firmware upgraded encountered an issue and i cant get into recovery mode the only thing i can get into is download mode and when i try to install the custom rom..you provided it says end on odin and when i try to install the leak ics it stays on hidden for hours..is my phone doomed..
Click to expand...
Click to collapse
Which FW are you trying to flash with Odin? Please put step by step what you have done so far.. and chill when you type lol
here is what i do..1. put the galaxy note into download mode because thats the only thing i can do..and 2. i have tried all the firmware available for my phone..the original fw doesn't work with odin it always say..end..and the other fw which is the Chinese leaked ics I9220LP1-N7000-ICS-REPACK-1..and the N7000XXLP1..and they both get stock at hidden..and kies says the phone is not responding and i have to reboot the problem is i cant..i honestly i dont know what to do...and sorry about the spelling error..cheers
robertkuro said:
here is what i do..1. put the galaxy note into download mode because thats the only thing i can do..and 2. i have tried all the firmware available for my phone..the original fw doesn't work with odin it always say..end..and the other fw which is the Chinese leaked ics I9220LP1-N7000-ICS-REPACK-1..and the N7000XXLP1..and they both get stock at hidden..and kies says the phone is not responding and i have to reboot the problem is i cant..i honestly i dont know what to do...and sorry about the spelling error..cheers
Click to expand...
Click to collapse
Which country are you in?
Canada and my galaxy note was brought from Germany so i don't thing Samsung Canada will cover the warranty
Which firmware have you tried? I'm guessing with it being a german note in canada you are gonna need to use european firmware?
This is the one i've just used and i have just come back from using the Chinese leak myself.
Is your note the 16gb or 32gb version? Check to make sure you're using the correct pit.
Open Odin 1.83
Connect your phone in download mode
Use the correct .pit in the PIT tab
Unpack the file you downloaded and put the Unzipped file in the PDA tab
Make sure re-partition is ticked and press start
All should be ok
Once done you can root and CWM with the links in Dr Ketans sig and you're away
its the 16 g
it did not work there was no pit file with the link you gave me and the pit i have says 32 g and i dont know where i can get a 16g pit if there is such thing
robertkuro said:
it did not work there was no pit file with the link you gave me and the pit i have says 32 g and i dont know where i can get a 16g pit if there is such thing
Click to expand...
Click to collapse
I can email you the pit file you need if you pm your address mate
ok i just did send you my email
Hasnt come through hmm...
Ok download this and unpack that will give you both pits and odin.. just select the 16gb pit and you're away
robertkuro said:
ok i just did send you my email
Click to expand...
Click to collapse
Did it work? Use the 16gb pit from the second link with the kka firmware from the first
Sent from my GT-N7000 using xda premium
Brother I can't thank you enough ..it worked and I really appreciated guiding me step by step god bless you brother ..thank you so very much once again
robertkuro said:
Brother I can't thank you enough ..it worked and I really appreciated guiding me step by step god bless you brother ..thank you so very much once again
Click to expand...
Click to collapse
No problem dude glad i could help
please help bro.....
I am to facing the same problem can u tell me which which rom shd i download and can u please send me the links of all the files that will help me fix the problem.
@ nuklearmonkeyuk: I am searching for a 32 GB PIT-File for rooting my Note (32 GB). Can't find such at all . Are you shure it exists?? All my searching failed, only found 16 GB PIT. Found a Post that said it don't care. Can you help me please ??
Edit: want to root my Note using Chainfires TUT, so I have to downgrade to KJ1. Dowloaded it, it's a "3-Part" one (I think) with a 16 GB PIT file.
Greatings from Germany
Hello guys, need a little help here.
Yesterday I flashed ICSSGS RC4.2 rom to my i9000. because of a bug (cannot record video) i decided to flashed Value Pack XXJW4 2.3.6 Firmware via Odin. but then, i got the boot loop things. I flashed again for the 2nd time but still got boot loop.
Any solution for this? I hope you all can help.
Thanks in advance.
shafixx said:
Hello guys, need a little help here.
Yesterday I flashed ICSSGS RC4.2 rom to my i9000. because of a bug (cannot record video) i decided to flashed Value Pack XXJW4 2.3.6 Firmware via Odin. but then, i got the boot loop things. I flashed again for the 2nd time but still got boot loop.
Any solution for this? I hope you all can help.
Thanks in advance.
Click to expand...
Click to collapse
you need to make sure you have a pit and repartition ticked as the partition layout is different
thanks for the response. but the .zip file that i've downloaded only contain the .tar file and .dll file. where can i find the pit file?
shafixx said:
thanks for the response. but the .zip file that i've downloaded only contain the .tar file and .dll file. where can i find the pit file?
Click to expand...
Click to collapse
go to samfirmware.com and get a firmware for your region with pit, full instructions over there
unfortunately i didnt know the version and region for my device. if i flashed another rom first can i detect the region version?
shafixx said:
unfortunately i didnt know the version and region for my device. if i flashed another rom first can i detect the region version?
Click to expand...
Click to collapse
??? Where do you live?!
i lived in malaysia but i bought this phone, second-hand actually from a unknown person. so i have to choose malaysian version then? lol sorry i'm really noob about this thing
if its i9000 then just find i9000 firmware for Malaysia
and practice using the thanks button
i already checked the malaysian version but that is carrier-based version. i'm confident that this phone is not from a carrier.
long story short, i bought this phone but still in stock Samsung 2.3.3. then i flashed the value pack and later on i flashed the ICSGCS rom. the baseband version of my i9000 is I9000XXJVU. so which one should i choose?
i'm really confused here.
i think i got it. i'll try to flash the file that i've downloaded first. thanks for your help sir
my solution is solved. thanks for giving me tips and clue where to get the stock rom
i have successfully dead booted my tab(gratz to me) a few days ago, i had it fixed,now im running jb 4.1.2 which i flashed via odin,i searched for within this forum,the jtag service said that my internal memory is damage,but i found a thread in some site saying i need to repartition the tab to make it fully work again,i dont wanna mess it up again coz thats the reason i dead booted it in the first place when i accidentally checked the repartition option,i was hoping for someone who undergone the same experience as i did and successfully repartitioned his internal memory,i am looking for pit files,pda,phone,csc files to use in my shw-m180s.theres a guide to take it out,but i dont wanna do that.it was a repartition error on my side.any help would be greatly appreciated.
Simple question. If i get in trouble, can I:
Flash the PIT file alone? (Choose PIT, thick Re-Partition, Flash. Without PDA-PHONE-CSC)
Flash the PIT file with 1-Package (PDA+PHONE+CSC in 1 file) stock firmware? (Choose PIT, thick Re-Partition, choose PDA only, Flash)
I searched in various forums and it seems you can do it, i just want to make sure before trashing my phone in the process
Thank you
elPicione said:
Simple question. If i get in trouble, can I:
Flash the PIT file alone? (Choose PIT, thick Re-Partition, Flash. Without PDA-PHONE-CSC)
Flash the PIT file with 1-Package (PDA+PHONE+CSC in 1 file) stock firmware? (Choose PIT, thick Re-Partition, choose PDA only, Flash)
I searched in various forums and it seems you can do it, i just want to make sure before trashing my phone in the process
Thank you
Click to expand...
Click to collapse
when you have problems and only flashing the firmware is possible, you can use PIT (to repartition) with the firmware (stock ROM) be it packed as 1 package or split into three files ( look here for guide) .
Check this out! Links to useful Guides and " Banned " Documentaries
Cool thanks
Is there any case where I shouldn't use the PIT file (Re-Partition), like, at all, because would risk a brick?
Like using it alone without loading the firmware in odin or something?
Just to make sure to avoid getting in troubles
Thanks
elPicione said:
Cool thanks
Is there any case where I shouldn't use the PIT file (Re-Partition), like, at all, because would risk a brick?
Like using it alone without loading the firmware in odin or something?
Just to make sure to avoid getting in troubles
Thanks
Click to expand...
Click to collapse
samsung has ensured that you would not be able to flash PIT alone on all later versions of Odin3, it must go with something, so don't try to do it.
you do not need to use PIT in normal upgrades of firmware, its only needed when you have a problem with your ROM or you are downgrading from a custom ROM ( custom ROM's were not released by Samsung, so its not their firmware. )
Check this out! Links to useful Guides and " Banned " Documentaries
@elPicione
Stock ROMs made for i9000 use the same partition size for the /system.
Many custom ROMs use different partition size, so when you downgrade to stock ROM you should always flash PIT file as well.
For flashing between stock ROMs you don't need PIT. Xsenman already wrote you correctly, I just accomplish the info.
Thank you guys, very informative!
I will take this as a general advice for samsung devices, because I'm going to flash my GTab2 P5100 to CM10.1. So I will make sure to have a 1-Package firmware and the 16GB PIT to fire back in the tab, just in case something goes horribly wrong. Damn I was waiting for the 10.2, shame it didn't even get the RCs.
Final question (if someone has time to answer): while i was formatting the internal SD of the i9000(sdcard0), the latest CWM from CM10.2 asked me what filesystem to use. What's generally the default for internal SDs, FAT32 (so it can be written by Windows) or EXT4?
Thank you
elPicione said:
What's generally the default for internal SDs, FAT32 (so it can be written by Windows) or EXT4?
Click to expand...
Click to collapse
Samsung uses rfs system format which is compatible with windows fat32, so default file sytem format will normally be in fat32 format for stock ROM's, custom ROM's are capable of reading ext4 format.
so its safer to format your SD card as fat 32, and when and if you flash custom ROM's it will be converted to ext4 format by the ROM.
Check this out! Links to useful Guides and " Banned " Documentaries
elPicione said:
...I will take this as a general advice for samsung devices, because I'm going to flash my GTab2 P5100 to CM10.1. So I will make sure to have a 1-Package firmware and the 16GB PIT to fire back in the tab, just in case something goes horribly wrong. Damn I was waiting for the 10.2, shame it didn't even get the RCs.
Click to expand...
Click to collapse
P5100 works excellent with nightlies CM10.2
I use myself P5110 with blackhawk kernel (that must be flashed together with proprietary-vendor-samsung.zip file)
I think that the /system partition size for all P51xx is always the same and doubt you will need a PIT file for it. If you find some download link that works without Google+ or facebook or any other social network signing-in, please post the link (or attach the file)
tetakpatak said:
P5100 works excellent with nightlies CM10.2
I use myself P5110 with blackhawk kernel (that must be flashed together with proprietary-vendor-samsung.zip file)
I think that the /system partition size for all P51xx is always the same and doubt you will need a PIT file for it. If you find some download link that works without Google+ or facebook or any other social network signing-in, please post the link (or attach the file)
Click to expand...
Click to collapse
Ugh did't know it's difficult to find PITs fot P51xx
Damn I can't even download the whole firmware right now because my connection is so unstable. Download mirrors from sammobile are so f slow, and if I lose the connection I think I'll be forced to restart from scratch. Last time i downloaded a rom from sammobile (i9100) it was running arond 30kBps. I'm NOT joking, this is ridiculous. It took the whole night to get the thing.
Maybe I just have to give up this time and make a subscription for those crappy download sites, so i can resume the download. I just hope someone will finally fix the CheckFUS
BTW if I find the PIT I'll let you know and post it here
Yup, but untested
http://forum.xda-developers.com/showpost.php?p=48059154&postcount=1
If someone could give me a link for 4.2.2 firmware for P5100 with a decent speed would be great. I'm from italy so ITV would be the best for modem and csc
elPicione said:
If someone could give me a link for 4.2.2 firmware for P5100 with a decent speed would be great. I'm from italy so ITV would be the best for modem and csc
Click to expand...
Click to collapse
go here and download for your region
Check this out! Links to useful Guides and " Banned " Documentaries
elPicione said:
Yup, but untested If someone could give me a link for 4.2.2 firmware for P5100 with a decent speed would be great. I'm from italy so ITV would be the best for modem and csc
Click to expand...
Click to collapse
We're getting off topic here, but I would suggest you to run 4.3 ROM: CyanogenMod 10.2
http://forum.xda-developers.com/showthread.php?t=2381402
It works excellent with the P51xx, faster and smoother than 4.2.2 based ROMs and gives longer battery life. Don't worry for RC, nightlies work great. "Stable" or "RC" is just a label anyway, CM10.2 nightlies for Tab2 are very well developed.
elPicione said:
Simple question. If i get in trouble, can I:
Flash the PIT file alone? (Choose PIT, thick Re-Partition, Flash. Without PDA-PHONE-CSC)
Flash the PIT file with 1-Package (PDA+PHONE+CSC in 1 file) stock firmware? (Choose PIT, thick Re-Partition, choose PDA only, Flash)
I searched in various forums and it seems you can do it, i just want to make sure before trashing my phone in the process
Thank you
Click to expand...
Click to collapse
xsenman said:
samsung has ensured that you would not be able to flash PIT alone on all later versions of Odin3, it must go with something, so don't try to do it.
you do not need to use PIT in normal upgrades of firmware, its only needed when you have a problem with your ROM or you are downgrading from a custom ROM ( custom ROM's were not released by Samsung, so its not their firmware. )
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
I just flashed my Note2 only the PIT file, by advise Dr. Ketan.
and it is OK.
Just fine.
injulia said:
I just flashed my Note2 only the PIT file, by advise Dr. Ketan.
and it is OK.
Just fine.
Click to expand...
Click to collapse
yes, look here
[8] Problem :- Boot Loops, Booting Problems, Stuck at Boot Screen
Solution:- Flash a 512 Pit File using Odin3 v1.0 with Repartition unticked (only Odin3 version 1.0 can flash this way)
Check this out! Links to useful Guides and " Banned " Documentaries