Database Develop

Stuck in binary update in recovery boot loop

I have been using ecliptic JB rom for a long time. I installed SuperSU , thinking it was a better option than Super user. When I installed it said it needed to update the binary code, which I have seen before, so I let it do it in recovery. I have Phil's recovery. And now it's stuck in a boot loop trying to update binary. I can get into boot loader but when I try to get into recovery mode it just tries to update the binary and won't let me flash anything. I am still S-on, I never looked into going S-off. Can anyone help? Thank you.

Can you not enter fastboot and reflash your recovery?
Or, you might have a zip in the open recovery script folder it's trying to run (likely the supersu.zip)?

I can get into fastboot but when I try to open up recovery to try to flash a backup or a rom it shows the funky android trying to update the binary and goes back into boot loop.

Sounds like you need to flash PhilZ again. One of the roms I flashed erased my recovery for some reason, and the way I found out was same as you trying to update the Su binaries. I re-flashed my recovery and it was fine.
Also if you want help getting S-OFF PM me I'll be happy to help

[Q] Accidentally wiped system and now I can't boot into recovery

I followed all of the instructions in the Nexus 6 Guide to unlock, root and flash a custom recovery.
I was trying to sideload a rom into my phone and was doing advanced wipe in TWRP. I accidentally choose system thinking it would be fine since I am flashing a new rom anyway.
I think I force shut down the phone and now it just stays and hangs on the google logo. I can only get into the bootloader/fastboot. When I try getting into TWRP recovery it just flashes for a second and then attempts to reboot.
I figure I should try flashing a rom via adb bootloader/fastboot but I attempted a few times and failed. Can someone help walk me through this?
Edit: I can access TWRP recovery now... I tried doing sideload several more times but for some reason I keep getting loading rom.zip cannot read rom.zip

Well i going to geuss you know to to get to recovery though bootloader thought your phone
But your phone is semi Bricked
You can download wugs toolkit
And i will show unroot/flash stock you will click bootloop/ bricked and go though the steps
And it will download the stock software and reovery and go though the steps you will be fine
If you want use the same toolkit and root and install twrp again

Do you use a USB otg drive? If you don't you can send a rom to twrp using some commands.
Try to redownload the ROM that won't work and put it on the phone via a USB otg drive or using your pc and don't forgot gaps.

If you're not, use the WUG toolkit to reflash the stock ROM. Then you can use that to flash your new ROM

Unless im missing somethimg, why not just flash the factory image through fastboot and start over?

Like mentioned above, or just flash TWRP in fastboot. Then boot into TWRP, and flash ROM.

XT1095 Only able to boot into bootloader or TWRP recovery

Whenever my recovery is TWRP I am not able to boot into any type of ROM. Every time I reboot my phone it will be past the "your bootloader is unlock" and always boots straight into TWRP. When I flash stock recovery I am stuck at a image of a Android and it just stays at "erasing..." till it reboots itself. I have attempted to flash different types of roms by sideloading through TWRP and also attempted to flash stock recovery through fastboot with no luck at all.
The issue started whenever I was on stock 6.0 and flashed TWRP. Once I was in TWRP at the end when I was rebooting my phone I said yes to install supersu, which I know now was a mistake. Afterwards I was stuck in a bootloop were I finally attempted to do a factory reset which seemed to have made things worse. That was when I was stuck at the "erasing..." whenever I attempted to boot through stock recovery. Not sure what else to try at this point.
Any help would be great at this point.

I'm in the same boat. Exact same problem with no idea how to fix. I can get into fastboot screen, but that's it. Suggestions? Thanks in advance.

HELP - Cant boot after updates

Hi, I have a MI5 with chinese ROM...
I've unlocked the bootloader, flashed TWRP rocovery and rooted it.
Problem start when i updated using the built in apps. And now i am in this MI logo screen with the 2 dots flashing... 20-30minutes.
I've tried wiping to factory reset, wipe dalvik > reboot ... no go
I've tried miflash the fastboot rom and Miflash showed "The operation completed successfully." > auto reboot ... now is 25 minutes into the boot.... still no go
I'm panicking now.... Please help

I forgot to mention, the file system is decrypted.
Now i cant go into twrp. there's a screen showing a phone with cable. I still can go fastboot though
Help please

Just to share, I'm able to get it boot again.
Instead of using "Flash All except Storage" in Miflash, I selected "Flash All".
After completion of the flashing, it took around 7-8 minutes for the first boot before system GUI came on.
I think it may be due to SuperSU that i have installed earlier.
But now i cannot boot into recovery, should i fastboot flash TWRP again or revert to stock recovery? Please help on how to do it.
Can i install SuperSU by using fastboot?

it makes more sense now.
After flashing of developer rom, the phone is encrypted again and recovery is reverted to stock which i think will only works with updater.

Only able to access fastboot, boot and recovery mode both fail.

Hello Guys,
Yesterday I tried to root my Moto 2g.
Unlocked it's bootloader,Installed Twrp and installed supersu. Also downloaded a custom mod(the most famous one I guess) and installed it,only to find out that the phone would no longer boot
but keep looping on the unlocked bootloader warning screen.While thinking that I had downloaded a non-compatible mod I Installed another one.After that,booting the phone would Instantly
take me to the recovery mode and keep looping the Teamwin logo.
I decided not to mess anymore with it and reinstall the stock firmware for moto 2g. After Installing it the Motorola logo comes up and then I am taken to the fastboot screen once again with the error saying:
"Fastboot reason,Fell through from boot recovery mode".Tried to flash CWM to see If I could get into recovery mode from there but I would get CWM logo loops exactly the same way they appeared with Teamwin logo.
Seems like phone is dead to me but still have a bit of hope,although the only place I can get is fastboot.
Edit:I tried to fastboot flash boot boot.img the stock image and I got and error saying that boot.img(10mb) exceeded the partition limit

shatterbb said:
Hello Guys,
Yesterday I tried to root my Moto 2g.
Unlocked it's bootloader,Installed Twrp and installed supersu. Also downloaded a custom mod(the most famous one I guess) and installed it,only to find out that the phone would no longer boot
but keep looping on the unlocked bootloader warning screen.While thinking that I had downloaded a non-compatible mod I Installed another one.After that,booting the phone would Instantly
take me to the recovery mode and keep looping the Teamwin logo.
I decided not to mess anymore with it and reinstall the stock firmware for moto 2g. After Installing it the Motorola logo comes up and then I am taken to the fastboot screen once again with the error saying:
"Fastboot reason,Fell through from boot recovery mode".Tried to flash CWM to see If I could get into recovery mode from there but I would get CWM logo loops exactly the same way they appeared with Teamwin logo.
Seems like phone is dead to me but still have a bit of hope,although the only place I can get is fastboot.
Edit:I tried to fastboot flash boot boot.img the stock image and I got and error saying that boot.img(10mb) exceeded the partition limit
Click to expand...
Click to collapse
try flashing the whole Stock Firmware
It might help,
U said u flashed a MOD over stock ROM?
If so, u should have boot first Just After unlocking the bootloader before Flashing any MODs

raj_45 said:
try flashing the whole Stock Firmware
It might help,
U said u flashed a MOD over stock ROM?
If so, u should have boot first Just After unlocking the bootloader before Flashing any MODs
Click to expand...
Click to collapse
I did boot after unlocking and normally flashed whole stock firmware.This morning I woke up and the error message in fastboot is 'boot up failed' for bot normal and recovery mode

shatterbb said:
I did boot after unlocking and normally flashed whole stock firmware.This morning I woke up and the error message in fastboot is 'boot up failed' for bot normal and recovery mode
Click to expand...
Click to collapse
is this your problem

raj_45 said:
is this your problem
Click to expand...
Click to collapse
Ok let me explain the situation better.Last night I used a stock firmware I found and flashed it.When I tried to boot I would see motorola logo once
fore boot mode,Then it would go to recovery so I would see it for a second time and then I would see teamwin logo looping so the phone was not
able to get into recovery mode but only into bootloader.
After That I flashed CWM and the same thing would happen with CWM logo looping now in recovery mode.
Today I woke up and flashed CWM again,and for some reason I could get into CWM and use it normally
So what I did is Installed Supersu and a mod for my xt1068 and tried to boot but phone stuck in the same endless loop again and I also cant get
into CWM again as its logo keeps flashing instead of taking me into the menu.
I believe there is an error with my data folder or partition or w/e.
Most of all I want to be able to get into CWM again

shatterbb said:
Ok let me explain the situation better.Last night I used a stock firmware I found and flashed it.When I tried to boot I would see motorola logo once
fore boot mode,Then it would go to recovery so I would see it for a second time and then I would see teamwin logo looping so the phone was not
able to get into recovery mode but only into boot loader.
After That I flashed CWM and the same thing would happen with CWM logo looping now in recovery mode.
Today I woke up and flashed CWM again,and for some reason I could get into CWM and use it normally
So what I did is Installed Supersu and a mod for my xt1068 and tried to boot but phone stuck in the same endless loop again and I also cant get
into CWM again as its logo keeps flashing instead of taking me into the menu.
I believe there is an error with my data folder or partition or w/e.
Most of all I want to be able to get into CWM again
Click to expand...
Click to collapse
So u are not able to get into Recovery
And u can get to Fast boot Mode?
If yes Flash TWRP latest(3..1.0-0)
Boot into TWRP
Reset or Install any Custom ROM like LiniageOS or AOSP
I think it's the problem with SuperSU?
Which MOD did u install?

raj_45 said:
So u are not able to get into Recovery
And u can get to Fast boot Mode?
If yes Flash TWRP latest(3..1.0-0)
Boot into TWRP
Reset or Install any Custom ROM like LiniageOS or AOSP
I think it's the problem with SuperSU?
Which MOD did u install?
Click to expand...
Click to collapse
Thanks for the replies,I managed to solve the problem and install Cyanogenmod.I guess everything came up to this:
After the first time I installed twrp I decided to wipe my data folder but somehow it was deleted and the partition became raw type which caused
all the bootlooping problems.
Using CWM I was able to get into recovery mode and then I chose to format my data folder and sd card(as ext4 I guess) and the data folder was
recreated.
After that I normally flashed Cyanogenmod and device booted just fine