2G mobile data not working lollipop - Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help &

hi i need some help on my i9305 i install Cyanogenmod 12.1 Beta Stable 1/AICP 9.0/Resurrection_Remix_LP_v5.4.4-20150508-i9305/Sammy_Resurrection_Remix_LP_v5.4.4-20150508-i9305 with full wipe my 2g mobile data is not working but my 2g mobile data is working on nameless 5.0.2/Old-Blobs-Resurrection_Remix_LP_v5.4.4-20150508-i9305 but network keep dropping and auto restart the network
is there any way to fix 2g mobile data and i have no problem with 3g mobile data
Thanks

Related

[Q] No mobile data with Cyanogenmod 7

Hello
Can anyone help me with my mobile data problem?
I flashed my Galaxy Mini with Cyanogenmod 7.1, 7.2 and the MusicEdition.
With all of these versions I am unable to get a mobile data connection (3G,...).
I've been looking around the forum for over a month now and I'm unable to find a solution here. My APN settings are correct.
With emanoN or going back to stock rom there's no problem. But I realy prefer using Caynogenmod.
Is this a radio problem?
If so, can I flash the radio separate from the rest to get it to work in my Country/with my provider?
I live in Belgium/Europe.
Thanks in advance for any information.
3G
Try to flash it, Iam from Europe too, and it works for me.
fixgps-cm-7.1.0-GalaxyMini-KANG-signed-09102011.zip
http://www.mediafire.com/?six437fyo5bys12
When I helped u , please press Thanks button
This only worked once for me!?
But I've found a much easyer way for anyone else who's got this problem.
1. In your stock rom, or in another rom where your mobile connection does work use APN backup/restore from the market to backup the
APN to your SD card
2. After flashing a rom where your APN doesn't work install APN backup/restore
3. Now just restore the previously backed up settings
This always fixes the mobile data connection for me.
Good luck.

Mobile Data Calling not working

I installed 4.4.4 .93 with flashtool.Now Mobile data and calling not working.What can I do ?
Problem suddenly fixed by the phone
Thread can be deleted

3G not working, only 2G. Please Help! :D

Hello. Since i installed the stock marshmallow 6.0 OTA via the TWRP backup my mobile internet connection has only worked in EDGE (2G) even though i set preffered network 3G. I tought it was a problem from marshmallow but i flashed Minimal OS (5.1.1) today and I still have the same problem. I even reflashed the modem and it's still not working. So could you please help me with this problem? Thank you in advance!
This happens with me because i only get night packs of 3g ..its gets deactivated after few days..so..if you have airtel like me.callcustomer care and ask them to activate 3g services..then reboot and try again also try in other slot ..just an idea and i had nitro spark which made 3g to 2g. Uninstall dat if u have..
dial *#*#4636#*#* and go to "Phone information"
scroll down and select "WCDMA only"
once you restart this will go back to the default setting
good luck.
I suggest you to call your service provider, maybe there could be the problem.

HTC data not work in 3g

greetings installation several rom and never active 3g data . help please

[GUIDE][only for INDIANs][JIO SIM][CM 13.0 based ROMs]

I am sharing my workaround to new JIO network.
If you are on MIUI, you are fine.
Those who are on custom ROM, or willing to flash these ROMs, especially on CM 13 based ROMs, keep reading.
Tested on CM 13 nightly (20160920).
Just to be on safe side
Insert JIO sim in SIM 1 slot and any other SIM in other slot. Make sure both SIMs are inserted.
Backup previous system.
Pull out SD card.
To get uninterrupted Jio service you need latest(Lollipop) modem and firmware on your device. To do that flash fastboot rom file.
Flash Fastboot rom-
http://en.miui.com/thread-336307-1-1.html
Guide to flashing fastboot ROM-
http://en.miui.com/thread-307744-1-1.html
Let it boot.
Now you need to flash custom recovery(I am using TWRP).
GUIDE- http://en.miui.com/thread-249552-1-1.html
Flash any cm 13.0 based ROM and Gapps.
After setting everything it is possible that you are not getting any network of JIO.
As JIO is only 4G network. Choose only LTE in sim cards setting.
To do that head over to Settings-SIM cards- SIM 1 settings-preferred network type-LTE
Access point names(APN setting).
Name- Internet
APN- jionet
keep everything else as it is.
you don' need to install Jio4GVoice(previously named as JioJoin) app.
To make calls mobile data(JIO) should be ON at all time.
Hit Thanks.
It reboot every time when signal drops during call.
And it is likely to happen frequently as Jio signal is weak to penetrate wall!
I don't think for calling ,data have to on all time on cm 13.I can call without turning on data in cm 13 as it is volte supported.
How is the speed of downloads?? I am getting quite slow speeds afrer a day's use. Also data is on even after mobile data has been switched off from QS.
Unable to select jio4gvoice as default phone app,
While placing a call jio4gvoice redirects to system dialer.
aashishdamrait said:
Unable to select jio4gvoice as default phone app,
While placing a call jio4gvoice redirects to system dialer.
Click to expand...
Click to collapse
This means your stock Dialer supports VoLTE( I checked this in Jio4G Voice app) so use stock Dialer
and In India many operators mainly Airtel, vodafone and Idea have rejected interconnection with Jio which results in outright call drop or the message that The network is busy and some of it is fault if Jio as they're increasing their customer base even when they haven't got fully operational servers. SO don't worry as its free in India and there should be some flaws in anything which is free(specially in India)
I didnt get VOlte in my Redmi CM13 custom ROM
i'm unable to use VOlte feature through normal dailerwhether i switched the data connection to ON or OFF .,the call basically disconnects
lokesh reddy said:
i'm unable to use VOlte feature through normal dailerwhether i switched the data connection to ON or OFF .,the call basically disconnects
Click to expand...
Click to collapse
That means ur device is not volte supported.If u r using any custom rom and if there is a "HD" notification,then u can call by stock dialer.Otherwise u have to use jio4gcall apps
i tried a lot of cm13 based roms and aosp6.0 based roms, something seems to be wrong!! Previously the volte worked in the cm13 roms... now it doesn't... its like it only reverts back to kk bootloader or detects only kk bootloader although I installed miui lp.... Volte only works in miui lp for me! Any suggestion? Help required!
Search for my post in Redmi 2 Q&A. Working steps are detailed. Read them twice and you should get VoLTE
Sent from RN3 Pro

Categories

Resources