Related
Hi everybody,
A few days ago, I rooted my Mexican XT1225. I shut it down for a day (my main cellphone is the new Moto X), turn it on again and now it's stuck on fastboot.
I could boot into TWRP (by flashing it temporarily with fastboot on Linux) and then I decided to wipe data and then install the new lollipop zip file. But it failed saying it could not mount /system /data or anything really, I basically have it without format, all partitions say 0MB.
So I tried flashing with fastboot, but it gave me an error when flashing the partition gpt.bin, it didn't give me an error when flashing other files. Still stuck, now I cannot even access the recovery menu, it goes just into fastboot mode and does not show the little recovery menu anymore.
Then I tried flashing with RSD, still same problem. It fails when setting the fb_mode_set and when I delete that line from the xml it fails again on flashing gpt.bin
EDIT: I am attaching a log file of TWRP evidencing this.
Any ideas on how to get back to normal? How can I redo the partition in another way?
Thanks in advance,
Gustavo
Unlocked bootloader? Just remove the got. Bin flash line
Jaocagomez said:
Unlocked bootloader? Just remove the got. Bin flash line
Click to expand...
Click to collapse
Yes, unlocked bootloader. Removed the gpt.bin flash line and still no luck. Tried flashing several files, the Indian Lollipop, the Mexican Kitkat, nothing has worked.
gusbeto37 said:
Yes, unlocked bootloader. Removed the gpt.bin flash line and still no luck. Tried flashing several files, the Indian Lollipop, the Mexican Kitkat, nothing has worked.
Click to expand...
Click to collapse
After re reading your post I understood what's wrong, you have to flash the lollipop OTA on stock recovery not twrp or rsd lite, once you flash it you can put back twrp
Jaocagomez said:
After re reading your post I understood what's wrong, you have to flash the lollipop OTA on stock recovery not twrp or rsd lite, once you flash it you can put back twrp
Click to expand...
Click to collapse
I have the xml.zip file, extracted it and manually flashed partition by partition. Something I have previously done with my 1st gen Moto X, my Razr HD and even my Atrix, if I remember correctlly. Even RSD Lite should work with those files.
Still, I will try to boot with the stock recovery, since right now I cannot access it. I will also seek a way to get the xml.zip file inside the storage, since I cannot even mount it with TWRP (It shows 0mb drive)
gusbeto37 said:
I have the xml.zip file, extracted it and manually flashed partition by partition. Something I have previously done with my 1st gen Moto X, my Razr HD and even my Atrix, if I remember correctlly. Even RSD Lite should work with those files.
Still, I will try to boot with the stock recovery, since right now I cannot access it. I will also seek a way to get the xml.zip file inside the storage, since I cannot even mount it with TWRP (It shows 0mb drive)
Click to expand...
Click to collapse
Twrp for this device it's not very stable I got that errors too
Just flash mexico firmware then the OTA zip on stock recovery and you will be good to go.
If you can't access recovery press vol- and power with the phone turned off and you'll be able to select recovery
Hi,
I have tried the vol+power and cannot access recovery.
When I try to flash Mexico's firmware (through either RSD or manually in Linux using fastboot), I am unable to flash partition gpt.bin, but I can flash everything else. Yet, in spite of flashing everything else, I cannot get out of the fastboot loop.
I am attaching some photos of what happens. The first one is the only thing that boots, cannot access recovery, cannot boot normally. The second photo is what happens when I press the volume button many times.
So when you select recovery does it power off or just go back to fastboot again?
Steve-x said:
So when you select recovery does it power off or just go back to fastboot again?
Click to expand...
Click to collapse
Hi, I dan only go yo fastboot. The menú does not appear. The only thing that appears is the photo of my previous post.
I can boot into TWRP by manually doing fastboot boot twr-recovery.IMG
Hmmm, doesn't look good. The fastboot screen doesn't even load the picture of the green Android. I am thinking the partition table is messed up. I know I saw something similar with the original(2013) Moto X a while back. You may want to do some searching in that forum.
gusbeto37 said:
Hi, I dan only go yo fastboot. The menú does not appear. The only thing that appears is the photo of my previous post.
I can boot into TWRP by manually doing fastboot boot twr-recovery.IMG
Click to expand...
Click to collapse
flash mexican stock rom with rsd lite
Steve-x said:
Hmmm, doesn't look good. The fastboot screen doesn't even load the picture of the green Android. I am thinking the partition table is messed up. I know I saw something similar with the original(2013) Moto X a while back. You may want to do some searching in that forum.
Click to expand...
Click to collapse
Hola Steve,
Indeed, it looks like the partition table is messed up, I will look for that Moto X thread.
@Jaocagomez I have tried that, but it fails with gpt.bin partition flash and even after flashing everything else (RSD, fastboot or TWRP) it does not work.
After reading quite a lot on the Internet, it seems that my problem happened to some Moto G and Moto X users. Seems to be that I am trying to flash a gpt.bin that is older than the one already in my phone. I will try again when the Mexican Lollipop image is released in xml.zip format.
In the mean time, I will continue to search for solutions.
Hi
I think I have the same issue.
I have XT1225 bought it from Amazon (I asked the company and they said Puerto Rico origin) factory unlocked. had 4.4.4 and tried to upgrade to 5.0.2. Here is what I exactly did:
devices not rooted, locked bootloader
downloaded RSD Lite
downloaded the official 5.0.2 India Firmware
tried to flash it using RSD
got an error in flashing boot from RSD
I tried to do it again and I get the same issue, I tried to flash the Puerto Rico 4.4.4 and it didnt work (it get stuck in partition gpt) and my device is dead. I tried to unlock the bootloader using the code from motorola and it says allow oem unlock from developer menu
tried doing it manually using mfastboot with both 5.0.2 and 4.4.4 and still didnt work.
please let me know if you managed to fox your problem or if anyone can help us get back our devices
Stuck in fastboot
rehaili said:
Hi
I think I have the same issue.
I have XT1225 bought it from Amazon (I asked the company and they said Puerto Rico origin) factory unlocked. had 4.4.4 and tried to upgrade to 5.0.2. Here is what I exactly did:
devices not rooted, locked bootloader
downloaded RSD Lite
downloaded the official 5.0.2 India Firmware
tried to flash it using RSD
got an error in flashing boot from RSD
I tried to do it again and I get the same issue, I tried to flash the Puerto Rico 4.4.4 and it didnt work (it get stuck in partition gpt) and my device is dead. I tried to unlock the bootloader using the code from motorola and it says allow oem unlock from developer menu
tried doing it manually using mfastboot with both 5.0.2 and 4.4.4 and still didnt work.
please let me know if you managed to fox your problem or if anyone can help us get back our devices
Click to expand...
Click to collapse
I am facing the same problem
Though my device is different : XT1254 (verizon locked)
As bootloader is not unlocked, i cannot flash any software any way. Tried all the software from all the countries but to no avail.
The Phone is stuck in fastboot mode.
Please help
You 1225 folks might want to wander into this thread... http://forum.xda-developers.com/droid-turbo/general/tutorial-to-kk-soak-lollipop-t3041129 ... I've hashed my phone out a couple times between CM, lollipop, exposed, playing with the kernal and so on and it got me back up and running.
guys I need ASAP help, stuck in reboot after update, got intsallation error 7. now im stuck on logo reboot, cannot enter recovery (I see "dead" android icon. Please help!
jazzus said:
guys I need ASAP help, stuck in reboot after update, got intsallation error 7. now im stuck on logo reboot, cannot enter recovery (I see "dead" android icon. Please help!
Click to expand...
Click to collapse
We need more information. What is your original firmware, what did you try to update to and is your bootloader unlocked?
Steve-x said:
We need more information. What is your original firmware, what did you try to update to and is your bootloader unlocked?
Click to expand...
Click to collapse
Ok fixed, after 20 or 30 tries I was able to enter recovery Thx!
Since pepole have no knolege of what they are doing and kind of blame me for it i will not provide the images anymore.
Please lock this thread.
Thank you so much!
Question: Do we have to flash the stock recovery after flashing the rooted system image? I prefer to have TWRP recovery anyways.
akarol said:
Thank you so much!
Question: Do we have to flash the stock recovery after flashing the rooted system image? I prefer to have TWRP recovery anyways.
Click to expand...
Click to collapse
worst case just reflash TWRP =]
akarol said:
Thank you so much!
Question: Do we have to flash the stock recovery after flashing the rooted system image? I prefer to have TWRP recovery anyways.
Click to expand...
Click to collapse
You can use whatever recovery you would like, the system image does not affect the recovery in any way.
Thanks - flashed your bootloader files which got me out of a never ending boot animation issue
j32olger said:
Thanks - flashed your bootloader files which got me out of a never ending boot animation issue
Click to expand...
Click to collapse
The bootloop have nothing to do with my bootloader files, they are completley stock from the ota file!
If you installing the new bootloader files on older roms you are asking for troubles.
Boot the watch in bootloader mode and flash the files as described and you watch will work.
Af if it bootlooping run a "Fastboot -w" after flashing.
Greetings, Is the newly released OTA compatible with your rom?
drmcatchr said:
Greetings, Is the newly released OTA compatible with your rom?
Click to expand...
Click to collapse
No ota files will only work with stock untouched rom.
bunny0007 said:
No ota files will only work with stock untouched rom.
Click to expand...
Click to collapse
Are you planning on releasing a pre-rootet image of the latest ota?
Would be greatly appreciated!
2k4ever said:
Are you planning on releasing a pre-rootet image of the latest ota?
Would be greatly appreciated!
Click to expand...
Click to collapse
Have added it today.
I tried this using the update (LCA44B) and now the watch doesn't even turn on. No LG logo or anything.
GuiyeC said:
I tried this using the update (LCA44B) and now the watch doesn't even turn on. No LG logo or anything.
Click to expand...
Click to collapse
And you did follow the instuctions?7
Flash bootloader stuff
Flash system image
Flash boot image
Have testet it serval times without errors.
bunny0007 said:
And you did follow the instuctions?7
Flash bootloader stuff
Flash system image
Flash boot image
Have testet it serval times without errors.
Click to expand...
Click to collapse
Yep, just like in the steps, the thing did show a FAILED (anti-rollback) when flashing the 'aboot'. I just used everything that was on the zip, now the watch doesn't even show the LG logo, I've tried plugging it on and off and keeping the reset button pressed for a while. I really don't know what else to try.
I'm waiting for it to run out of battery, but I don't even know if it's "on".
GuiyeC said:
Yep, just like in the steps, the thing did show a FAILED (anti-rollback) when flashing the 'aboot'. I just used everything that was on the zip, now the watch doesn't even show the LG logo, I've tried plugging it on and off and keeping the reset button pressed for a while. I really don't know what else to try.
I'm waiting for it to run out of battery, but I don't even know if it's "on".
Click to expand...
Click to collapse
Did just ran it on my own watch and everything working.
If you aboot fails flashing your watch might have another problem, i assume that your watch have an unlocked bootloader??
bunny0007 said:
Did just ran it on my own watch and everything working.
If you aboot fails flashing your watch might have another problem, i assume that your watch have an unlocked bootloader??
Click to expand...
Click to collapse
Yes, it had the boot loader unlocked, and I can't try again flashing the aboot because I can't get it to recovery mode or fast boot mode or anything.
Who can I get the images from?
bunny0007 said:
Since pepole have no knolege of what they are doing and kind of blame me for it i will not provide the images anymore.
Please lock this thread.
Click to expand...
Click to collapse
By people, do you mean 1 person ???
Pretty unfair for other, isn't it ?
I am looking for bootloader files for the G Watch R to flash over what I believe to be a corrupt bootloader on my device. It will only boot when on the charging stand, and so far I have only been able to get it to boot to 5.0.1 successfully. Once the device tries to pull down the OTA update it reboots and proceeds to run the update and then it fails and powers off.
Currently I can access fastboot and I can get it to boot a stock recovery and twrp with the 5.0.1 boot.img flashed to my device.
Can anyone who has downloaded the original package from this thread PM me the files? I need to reflash my bootloader files to attempt to fix a booting issue with my watch. Any help would be appreciated and I will not hold anyone accountable if I hard brick my device.
fnj00 said:
Can anyone who has downloaded the original package from this thread PM me the files? I need to reflash my bootloader files to attempt to fix a booting issue with my watch. Any help would be appreciated and I will not hold anyone accountable if I hard brick my device.
Click to expand...
Click to collapse
Hi there ,
Why don't you try this one ??
http://forum.xda-developers.com/g-w...edroid-r-urbane-port-v1-0-0-june-6th-t3128850
Hello guys,
When I tried to update my Moto X for AT & T to RETAIL BR "VICTARA_RETBR_XT1097_5.1_LPE23.32-14.2_cid12_CFC.xml" version, now only comes into fastboot boot and says "Bad check failed for boot, downgraded version for boot, failed to validate boot image ".
Then I thought that would solve flashing with "VICTARA_ATT_XT1097_5.1_LPE23.32-21.2_cid1_CFC.xml" and I found this legend now, "downgraded version for primary_gdt"
Any idea how to fix it?
Thank you in Advance.
mseverini said:
Hello guys,
When I tried to update my Moto X for AT & T to RETAIL BR "VICTARA_RETBR_XT1097_5.1_LPE23.32-14.2_cid12_CFC.xml" version, now only comes into fastboot boot and says "Bad check failed for boot, downgraded version for boot, failed to validate boot image ".
Then I thought that would solve flashing with "VICTARA_ATT_XT1097_5.1_LPE23.32-21.2_cid1_CFC.xml" and I found this legend now, "downgraded version for primary_gdt"
Any idea how to fix it?
Thank you in Advance.
Click to expand...
Click to collapse
Sorry but there is no solution to that error. You upgraded your bootloader and partition table to the ones from 6.0 and it is impossible to downgrade those. Do not under any circumstances take an OTA or it could cause a hard brick which is impossible for us to fix.
As far as getting your phone working, flash that firmware file you have. When you get to the errors about downgraded version, just ignore them and continue. You will need to erase cache and data to get back to 5.1. So make sure that you do:
fastboot erase cache
fastboot erase userdata
If all goes well your phone should be on 5.1 and working. But as I said before, taking an OTA now would most likely cause a permanent hard brick.
Sent from my XT1095 using Tapatalk
AGISCI said:
Sorry but there is no solution to that error. You upgraded your bootloader and partition table to the ones from 6.0 and it is impossible to downgrade those. Do not under any circumstances take an OTA or it could cause a hard brick which is impossible for us to fix.
As far as getting your phone working, flash that firmware file you have. When you get to the errors about downgraded version, just ignore them and continue. You will need to erase cache and data to get back to 5.1. So make sure that you do:
fastboot erase cache
fastboot erase userdata
If all goes well your phone should be on 5.1 and working. But as I said before, taking an OTA now would most likely cause a permanent hard brick.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
motoboot v60.16 in retailbr and att,
gpt.bin both v5.1,
when flashed retail brazil stopped in boot.img, then can´t flash gpt.bin of att version.
I don't understand what was caused the downgrade.
Thank you in advance.
Sorry for my english
mseverini said:
motoboot v60.16 in retailbr and att,
gpt.bin both v5.1,
when flashed retail brazil stopped in boot.img, then can´t flash gpt.bin of att version.
I don't understand what was caused the downgrade.
Thank you in advance.
Sorry for my english
Click to expand...
Click to collapse
I did the same thing, the problem was flash de cellphone with the bootloader locked, did you found a solution ?
At&t xt1097
I have the same problem, i flashed Brazilian XT1097 firmware on my AT&T XT1097 and i can't power on my device, please help us to flash correct firmware and bootloader
samkhara said:
I have the same problem, i flashed Brazilian XT1097 firmware on my AT&T XT1097 and i can't power on my device, please help us to flash correct firmware and bootloader
Click to expand...
Click to collapse
Which firmware did you have until the flash? you need to download the last firmware with the Stagefright patch and re-flash it.
lucasdursi said:
Which firmware did you have until the flash? you need to download the last firmware with the Stagefright patch and re-flash it.
Click to expand...
Click to collapse
I had before flash
System Version: 23.16.9.victara_att_att.en.US.att
Build namber LPE23.32-21.9
can you explain to me how can i flash correct firmware and return to stock?
samkhara said:
I had before flash
System Version: 23.16.9.victara_att_att.en.US.att
Build namber LPE23.32-21.9
can you explain to me how can i flash correct firmware and return to stock?
Click to expand...
Click to collapse
You need to re flash it with this firmware, is the last one with the Stagefright Patch: http://www.filefactory.com/file/705qta2o0wrt/VICTARA_ATT_XT1097_5.1_LPE23.32-21.9_cid1_CFC.xml.zip
Before the flash, power up you phone and put this command: fastboot oem fb_mode_clear
Then, turn it off amd be sure to power up your phone in FASTBOOT mode pressing the Power Button and Volume Down at the same time, when the phone boots, connenct it to the PC and flash it with RSD Lite like you did with the Brazilian firmware.
I hope it works! :good:
lucasdursi said:
You need to re flash it with this firmware, is the last one with the Stagefright Patch: http://www.filefactory.com/file/705qta2o0wrt/VICTARA_ATT_XT1097_5.1_LPE23.32-21.9_cid1_CFC.xml.zip
Before the flash, power up you phone and put this command: fastboot oem fb_mode_clear
Then, turn it off amd be sure to power up your phone in FASTBOOT mode pressing the Power Button and Volume Down at the same time, when the phone boots, connenct it to the PC and flash it with RSD Lite like you did with the Brazilian firmware.
I hope it works! :good:
Click to expand...
Click to collapse
I can not flash with RSD Lite , because my bootloader is locked and can't be unlocked , because it can't officially unlcok AT&T XT1097 bootloader. i try to flash my phones software but i can not power on it
samkhara said:
I can not flash with RSD Lite , because my bootloader is locked and can't be unlocked , because it can't officially unlcok AT&T XT1097 bootloader. i try to flash my phones software but i can not power on it
Click to expand...
Click to collapse
Do you speak spanish ?
Yes you can! I have the same Moto X and i did it that way.
It does not matter if you have the bootloader lock, to flash with RSD you don't need to unlock the bootloader.
You actually try to flash the phone with the lastest firmware ?
lucasdursi said:
Do you speak spanish ?
Yes you can! I have the same Moto X and i did it that way.
It does not matter if you have the bootloader lock, to flash with RSD you don't need to unlock the bootloader.
You actually try to flash the phone with the lastest firmware ?
Click to expand...
Click to collapse
can you send me a tutorial how can i flash it via RSD lite i can not recognize my phone via this software
samkhara said:
can you send me a tutorial how can i flash it via RSD lite i can not recognize my phone via this software
Click to expand...
Click to collapse
- Download the latest Motorola drivers for Windows: http://www.motorola.com/getmdmwin
- Download the latest firmware for your phone.
- Install drivers and RSD Lite to your PC.
- Make sure your battery at least 80% before we proceed.
- Turn off your phone and press both volume keys and power on. You'll enter bootmenu. (IMPORTANT!)
- Connect your phone to PC and your PC will detect and install the drivers automatically.
- Open RSD Lite and click ... beside filename. Browse to the firmware and double click it. A menu will popup and choose "uncompress and start flashing".
Hello
I TRY TO FLASH VIA RSD LITE , but i got error FAILED, VERSION DOWNGRADED FOR PRIMARY_GPT
CAN YOU TELL ME WHAT CAN I DO?
samkhara said:
Hello
I TRY TO FLASH VIA RSD LITE , but i got error FAILED, VERSION DOWNGRADED FOR PRIMARY_GPT
CAN YOU TELL ME WHAT CAN I DO?
Click to expand...
Click to collapse
You try with this firmware: VICTARA ATT XT1097 5 1 LPE23 32-21 9 cid1 CFC ????
Exactly, because you need the latest firmware for your phone. When you try to flash the Brazil Firmware, you already have the latest firmware, and now the flash fail because you need a new one...
A days ago, I receive a new update, you need to wait for the new firmware with this last update, and then try to flash it, be patient
lucasdursi said:
You try with this firmware: VICTARA ATT XT1097 5 1 LPE23 32-21 9 cid1 CFC ????
Exactly, because you need the latest firmware for your phone. When you try to flash the Brazil Firmware, you already have the latest firmware, and now the flash fail because you need a new one...
A days ago, I receive a new update, you need to wait for the new firmware with this last update, and then try to flash it, be patient
Click to expand...
Click to collapse
OK, where can i find this firmware ?
samkhara said:
OK, where can i find this firmware ?
Click to expand...
Click to collapse
You need to wait for the release, check this page, be patient: http://www.filefactory.com/folder/dd05c058d3ff8dbe
lucasdursi said:
You need to wait for the release, check this page, be patient: http://www.filefactory.com/folder/dd05c058d3ff8dbe
Click to expand...
Click to collapse
I have tried it and it works.
Thanks.
lucasdursi said:
Do you speak spanish ?
Yes you can! I have the same Moto X and i did it that way.
It does not matter if you have the bootloader lock, to flash with RSD you don't need to unlock the bootloader.
You actually try to flash the phone with the lastest firmware ?
Click to expand...
Click to collapse
can i unlock bootloader of moto x 2 at&t model
Unlocked bootloader, rooted. Running stock 5.0.2 (XT1064 US version).
System Version: 22.46.4.titan_retuaws.retuaws.en.US cc
Build Number: LXB22.99-24.4
System update says: Device software is up to date (so not getting OTA).
Please advise what I would need to get marshmallow on this device?
You won't get the OTA when rooted.
bluestang said:
You won't get the OTA when rooted.
Click to expand...
Click to collapse
so how do i unroot it?
Flash the stock rom
Look at Post #3 for your xt1064.
http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612
npatel555 said:
Flash the stock rom
Look at Post #3 for your xt1064.
http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612
Click to expand...
Click to collapse
thankyou! Now on LXB22.99-24.12. OTA is not coming through..it says upto date..
seshsud said:
thankyou! Now on LXB22.99-24.12. OTA is not coming through..it says upto date..
Click to expand...
Click to collapse
download the ota zip from my thread here
http://forum.xda-developers.com/moto-g-2014/general/6-0-xt1064-usa-ota-captured-t3327389
save the ota zip file to phone storage
reboot to stock recovery
apply update
npatel555 said:
download the ota zip from my thread here
http://forum.xda-developers.com/moto-g-2014/general/6-0-xt1064-usa-ota-captured-t3327389
save the ota zip file to phone storage
reboot to stock recovery
apply update
Click to expand...
Click to collapse
ok downloaded the image, however going into stock recovery from Fastboot (there are no options, only an exclamation mark)
seshsud said:
ok downloaded the image, however going into stock recovery from Fastboot (there are no options, only an exclamation mark)
Click to expand...
Click to collapse
once you see a droid with exclamation mark. press power and volume up button. you will be in the recovery mode.
npatel555 said:
once you see a droid with exclamation mark. press power and volume up button. you will be in the recovery mode.
Click to expand...
Click to collapse
Awesome!!! Finally upgraded to 6.0, many thanks to you!!!
Hello all, I just purchased a Moto X 2014 off craigslist, I'm not 100% sure which it is, how would I find out if its x1095 or x10xx etc ?
Andromendous said:
Hello all, I just purchased a Moto X 2014 off craigslist, I'm not 100% sure which it is, how would I find out if its x1095 or x10xx etc ?
Click to expand...
Click to collapse
Put it into bootloader mode:
fastboot getvar all
Copy and save all the info into a Notepad file for future reference.
gus ghanem said:
put it into bootloader mode:
Fastboot getvar all
copy and save all the info into a notepad file for future reference.
Click to expand...
Click to collapse
thank you very much! Looks like its xt1095!
Gus Ghanem said:
Put it into bootloader mode:
fastboot getvar all
Copy and save all the info into a Notepad file for future reference.
Click to expand...
Click to collapse
hmm.... just tried flashing twrp, and it says "mismatched recovery size", i tryed booting into recovery and the screen just goes blank and stays that way. I press power and it just reboots into the OS
Andromendous said:
hmm.... just tried flashing twrp, and it says "mismatched recovery size", i tryed booting into recovery and the screen just goes blank and stays that way. I press power and it just reboots into the OS
Click to expand...
Click to collapse
You checked that the bootloader is unlocked? Yes, you will get the mismatch error because you're flashing a non-stock file, it's normal, and it's ok, TWRP will still flash and boot, but you have to boot into recovery straight after you flash it. Use the latest TWRP 3.1.1
https://twrp.me/motorola/motorolamotox2014.html
If the bootloader is already unlocked, update the phone first, so that you have the latest bootloader version.
fastboot flash recovery twrp-3.1.1-0-victara.img
Gus Ghanem said:
You checked that the bootloader is unlocked? Yes, you will get the mismatch error because you're flashing a non-stock file, it's normal, and it's ok, TWRP will still flash and boot, but you have to boot into recovery straight after you flash it. Use the latest TWRP 3.1.1
https://twrp.me/motorola/motorolamotox2014.html
If the bootloader is already unlocked, update the phone first, so that you have the latest bootloader version.
fastboot flash recovery twrp-3.1.1-0-victara.img
Click to expand...
Click to collapse
ok thanks for the help. I figured it out. I dont know if this phone is just weird, or if I was entering fastboot mode wrong, but I've flashed a few roms now, one being pure nexus, for some reason I cant get magisk to work right, (I really just need netflix) I flashed rom,gapps, magisk and when it boots up there is no app for it, I tried flashing magisk again and the app gets install but netflix wont show up in the app store?
Andromendous said:
ok thanks for the help. I figured it out. I dont know if this phone is just weird, or if I was entering fastboot mode wrong, but I've flashed a few roms now, one being pure nexus, for some reason I cant get magisk to work right, (I really just need netflix) I flashed rom,gapps, magisk and when it boots up there is no app for it, I tried flashing magisk again and the app gets install but netflix wont show up in the app store?
Click to expand...
Click to collapse
I don't use either Magisk or Netflix, so I'm not familiar with them, but you can try the Netflix APK:
https://www.apkmirror.com/apk/netflix-inc/